All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v6 1/3] dt-bindings: touchscreen: convert eeti bindings to json schema
@ 2025-09-21 17:33 Dario Binacchi
  2025-09-21 17:33 ` [PATCH v6 2/3] dt-bindings: arm: bcm: raspberrypi,bcm2835-firmware: Add touchscreen child node Dario Binacchi
                   ` (3 more replies)
  0 siblings, 4 replies; 7+ messages in thread
From: Dario Binacchi @ 2025-09-21 17:33 UTC (permalink / raw)
  To: linux-kernel
  Cc: linux-amarula, sebastian.reichel, Dario Binacchi, Conor Dooley,
	Dmitry Torokhov, Krzysztof Kozlowski, Rob Herring, devicetree,
	linux-input

Convert EETI touchscreen controller device tree binding to json-schema.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>

---

Changes in v6:
- Add deprected to the compatible string and attn-gpios
  property
- Put const 0x2a i2c address for reg property only in case
  of not eeti,exc3000-i2c.
- Put false the attn-gpios property in case of not
  eeti,exc3000-i2c..
- Drop example for eeti,exc3000-i2c.

Changes in v5:
- Move bindings into eeti,exc3000.yaml
- Remove eeti.yaml

Changes in v2:
- Added in v2

 .../input/touchscreen/eeti,exc3000.yaml       | 33 +++++++++++++++----
 .../bindings/input/touchscreen/eeti.txt       | 30 -----------------
 2 files changed, 27 insertions(+), 36 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/input/touchscreen/eeti.txt

diff --git a/Documentation/devicetree/bindings/input/touchscreen/eeti,exc3000.yaml b/Documentation/devicetree/bindings/input/touchscreen/eeti,exc3000.yaml
index 1c7ae05a8c15..517ec721e724 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/eeti,exc3000.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/eeti,exc3000.yaml
@@ -9,39 +9,59 @@ title: EETI EXC3000 series touchscreen controller
 maintainers:
   - Dmitry Torokhov <dmitry.torokhov@gmail.com>
 
-allOf:
-  - $ref: touchscreen.yaml#
-
 properties:
   compatible:
     oneOf:
       - const: eeti,exc3000
       - const: eeti,exc80h60
       - const: eeti,exc80h84
+      - const: eeti,exc3000-i2c
+        deprecated: true
       - items:
           - enum:
               - eeti,exc81w32
           - const: eeti,exc80h84
   reg:
-    const: 0x2a
+    maxItems: 1
   interrupts:
     maxItems: 1
   reset-gpios:
     maxItems: 1
   vdd-supply:
     description: Power supply regulator for the chip
+  attn-gpios:
+    deprecated: true
+    maxItems: 1
+    description: Phandle to a GPIO to check whether interrupt is still
+                 latched. This is necessary for platforms that lack
+                 support for level-triggered IRQs.
   touchscreen-size-x: true
   touchscreen-size-y: true
   touchscreen-inverted-x: true
   touchscreen-inverted-y: true
   touchscreen-swapped-x-y: true
 
+allOf:
+  - $ref: touchscreen.yaml#
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: eeti,exc3000-i2c
+    then:
+      properties:
+        attn-gpios: false
+        reg:
+          const: 0x2a
+      required:
+        - touchscreen-size-x
+        - touchscreen-size-y
+
 required:
   - compatible
   - reg
   - interrupts
-  - touchscreen-size-x
-  - touchscreen-size-y
 
 additionalProperties: false
 
@@ -51,6 +71,7 @@ examples:
     i2c {
         #address-cells = <1>;
         #size-cells = <0>;
+
         touchscreen@2a {
                 compatible = "eeti,exc3000";
                 reg = <0x2a>;
diff --git a/Documentation/devicetree/bindings/input/touchscreen/eeti.txt b/Documentation/devicetree/bindings/input/touchscreen/eeti.txt
deleted file mode 100644
index 32b3712c916e..000000000000
--- a/Documentation/devicetree/bindings/input/touchscreen/eeti.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-Bindings for EETI touchscreen controller
-
-Required properties:
-- compatible:	should be "eeti,exc3000-i2c"
-- reg:		I2C address of the chip. Should be set to <0xa>
-- interrupts:	interrupt to which the chip is connected
-
-Optional properties:
-- attn-gpios:	A handle to a GPIO to check whether interrupt is still
-		latched. This is necessary for platforms that lack
-		support for level-triggered IRQs.
-
-The following optional properties described in touchscreen.txt are
-also supported:
-
-- touchscreen-inverted-x
-- touchscreen-inverted-y
-- touchscreen-swapped-x-y
-
-Example:
-
-i2c-master {
-	touchscreen@a {
-		compatible = "eeti,exc3000-i2c";
-		reg = <0xa>;
-		interrupt-parent = <&gpio>;
-		interrupts = <123 IRQ_TYPE_EDGE_RISING>;
-		attn-gpios = <&gpio 123 GPIO_ACTIVE_HIGH>;
-	};
-};
-- 
2.43.0

base-commit: f975f08c2e899ae2484407d7bba6bb7f8b6d9d40
branch: drop-touchscreen.txt

^ permalink raw reply related	[flat|nested] 7+ messages in thread
end of thread, other threads:[~2025-09-24 21:16 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2025-09-21 17:33 [PATCH v6 1/3] dt-bindings: touchscreen: convert eeti bindings to json schema Dario Binacchi
2025-09-21 17:33 ` [PATCH v6 2/3] dt-bindings: arm: bcm: raspberrypi,bcm2835-firmware: Add touchscreen child node Dario Binacchi
2025-09-22 20:53   ` Rob Herring
2025-09-21 17:33 ` [PATCH v6 3/3] dt-bindings: touchscreen: remove touchscreen.txt Dario Binacchi
2025-09-22 20:52 ` [PATCH v6 1/3] dt-bindings: touchscreen: convert eeti bindings to json schema Rob Herring (Arm)
2025-09-24 21:14 ` Dmitry Torokhov
2025-09-24 21:16   ` Dmitry Torokhov

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.