* [PATCH 0/1] add Yhgch soc chipset support @ 2025-08-08 5:35 chuguangqing 2025-08-08 5:35 ` [PATCH 1/1] [DRIVER] gpu: drm: add support for Yhgc ZX1000 soc chipset chuguangqing 2025-08-08 7:15 ` [PATCH v1] [PATCH 0/1] add Yhgch soc chipset support - Supplementary Cc simona chuguangqing 0 siblings, 2 replies; 22+ messages in thread From: chuguangqing @ 2025-08-08 5:35 UTC (permalink / raw) To: maarten.lankhorst, mripard, tzimmermann, airlied, simona Cc: linux-kernel, dri-devel, chuguangqing add Yhgch soc chipset support for Yhgch BMC chipset chuguangqing (1): [DRIVER] gpu: drm: add support for Yhgc ZX1000 soc chipset MAINTAINERS | 5 + drivers/gpu/drm/Kconfig | 2 + drivers/gpu/drm/Makefile | 1 + drivers/gpu/drm/yhgch/Kconfig | 5 + drivers/gpu/drm/yhgch/Makefile | 4 + drivers/gpu/drm/yhgch/yhgch-drm/Kconfig | 12 + drivers/gpu/drm/yhgch/yhgch-drm/Makefile | 20 + .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_de.c | 458 ++++++++++++++++++ .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.c | 374 ++++++++++++++ .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.h | 53 ++ .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_i2c.c | 89 ++++ .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_regs.h | 209 ++++++++ .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_vdac.c | 116 +++++ 13 files changed, 1348 insertions(+) create mode 100644 drivers/gpu/drm/yhgch/Kconfig create mode 100644 drivers/gpu/drm/yhgch/Makefile create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/Kconfig create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/Makefile create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_de.c create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.c create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.h create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_i2c.c create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_regs.h create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_vdac.c -- 2.43.5 ^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH 1/1] [DRIVER] gpu: drm: add support for Yhgc ZX1000 soc chipset 2025-08-08 5:35 [PATCH 0/1] add Yhgch soc chipset support chuguangqing @ 2025-08-08 5:35 ` chuguangqing 2025-08-27 9:17 ` Thomas Zimmermann 2025-08-08 7:15 ` [PATCH v1] [PATCH 0/1] add Yhgch soc chipset support - Supplementary Cc simona chuguangqing 1 sibling, 1 reply; 22+ messages in thread From: chuguangqing @ 2025-08-08 5:35 UTC (permalink / raw) To: maarten.lankhorst, mripard, tzimmermann, airlied, simona Cc: linux-kernel, dri-devel, chuguangqing add support for Yhgc BMC soc chipset Signed-off-by: chuguangqing <chuguangqing@inspur.com> --- MAINTAINERS | 5 + drivers/gpu/drm/Kconfig | 2 + drivers/gpu/drm/Makefile | 1 + drivers/gpu/drm/yhgch/Kconfig | 5 + drivers/gpu/drm/yhgch/Makefile | 4 + drivers/gpu/drm/yhgch/yhgch-drm/Kconfig | 12 + drivers/gpu/drm/yhgch/yhgch-drm/Makefile | 20 + .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_de.c | 458 ++++++++++++++++++ .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.c | 374 ++++++++++++++ .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.h | 53 ++ .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_i2c.c | 89 ++++ .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_regs.h | 209 ++++++++ .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_vdac.c | 116 +++++ 13 files changed, 1348 insertions(+) create mode 100644 drivers/gpu/drm/yhgch/Kconfig create mode 100644 drivers/gpu/drm/yhgch/Makefile create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/Kconfig create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/Makefile create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_de.c create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.c create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.h create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_i2c.c create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_regs.h create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_vdac.c diff --git a/MAINTAINERS b/MAINTAINERS index 10614ca41ed0..c79d9361fa81 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -27744,6 +27744,11 @@ S: Maintained F: Documentation/input/devices/yealink.rst F: drivers/input/misc/yealink.* +YHGC DRM DRIVER +M: chuguangqing <chuguangqing@inspur.com> +S: Maintained +F: drivers/gpu/drm/yhgch + Z8530 DRIVER FOR AX.25 M: Joerg Reuter <jreuter@yaina.de> L: linux-hams@vger.kernel.org diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index f7ea8e895c0c..8e0b1d12c81f 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -396,6 +396,8 @@ source "drivers/gpu/drm/sprd/Kconfig" source "drivers/gpu/drm/imagination/Kconfig" +source "drivers/gpu/drm/yhgch/Kconfig" + config DRM_HYPERV tristate "DRM Support for Hyper-V synthetic video device" depends on DRM && PCI && HYPERV diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile index 4dafbdc8f86a..f344e0173b29 100644 --- a/drivers/gpu/drm/Makefile +++ b/drivers/gpu/drm/Makefile @@ -231,6 +231,7 @@ obj-y += solomon/ obj-$(CONFIG_DRM_SPRD) += sprd/ obj-$(CONFIG_DRM_LOONGSON) += loongson/ obj-$(CONFIG_DRM_POWERVR) += imagination/ +obj-$(CONFIG_DRM_YHGCH) += yhgch/ # Ensure drm headers are self-contained and pass kernel-doc hdrtest-files := \ diff --git a/drivers/gpu/drm/yhgch/Kconfig b/drivers/gpu/drm/yhgch/Kconfig new file mode 100644 index 000000000000..ae9bb3974d04 --- /dev/null +++ b/drivers/gpu/drm/yhgch/Kconfig @@ -0,0 +1,5 @@ +# License: GPL-2.0 +# +# yhgch drm device configuration. + +source "drivers/gpu/drm/yhgch/yhgch-drm/Kconfig" diff --git a/drivers/gpu/drm/yhgch/Makefile b/drivers/gpu/drm/yhgch/Makefile new file mode 100644 index 000000000000..7ed11b275d55 --- /dev/null +++ b/drivers/gpu/drm/yhgch/Makefile @@ -0,0 +1,4 @@ +# +# Makefile for yhgch drm drivers. + +obj-$(CONFIG_DRM_YHGCH) += yhgch-drm/ diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/Kconfig b/drivers/gpu/drm/yhgch/yhgch-drm/Kconfig new file mode 100644 index 000000000000..10d586bbe897 --- /dev/null +++ b/drivers/gpu/drm/yhgch/yhgch-drm/Kconfig @@ -0,0 +1,12 @@ +config DRM_YHGCH + tristate "DRM Support for Yhgch BMC" + depends on DRM && PCI && MMU + select DRM_CLIENT_SELECTION + select DRM_KMS_HELPER + select DRM_VRAM_HELPER + select DRM_TTM_HELPER + help + Choose this option if you have a Yhgch soc chipset. + If M is selected the module will be called yhgch - drm. + IF Y is selected the module will be built into the kernel. + IF N is selected the module will be excluded from the kernel. diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/Makefile b/drivers/gpu/drm/yhgch/yhgch-drm/Makefile new file mode 100644 index 000000000000..4e2332b1843b --- /dev/null +++ b/drivers/gpu/drm/yhgch/yhgch-drm/Makefile @@ -0,0 +1,20 @@ +ifneq ($(KERNELRELEASE),) + +yhgch-drm-y := yhgch_drm_drv.o yhgch_drm_de.o yhgch_drm_vdac.o yhgch_drm_i2c.o + +#obj-$(CONFIG_DRM_YHGCH) += yhgch-drm.o +obj-m += yhgch-drm.o + + +else +knv := $(shell uname -r) +KERNELDIR := /lib/modules/$(knv)/build +PWD := $(shell pwd) + +default: + $(MAKE) -C $(KERNELDIR) M=$(PWD) modules +install: + $(MAKE) -C $(KERNELDIR) M=$(PWD) modules_install +clean: + $(MAKE) -C $(KERNELDIR) M=$(PWD) clean +endif diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_de.c b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_de.c new file mode 100644 index 000000000000..aa81afd91b02 --- /dev/null +++ b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_de.c @@ -0,0 +1,458 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include <linux/delay.h> +#include <drm/drm_atomic.h> +#include <drm/drm_atomic_helper.h> +#include <drm/drm_fourcc.h> + +#include <drm/drm_gem_vram_helper.h> +#include <drm/drm_vblank.h> + +#include "yhgch_drm_drv.h" +#include "yhgch_drm_regs.h" + +struct yhgch_dislay_pll_config { + u64 hdisplay; + u64 vdisplay; + u32 pll1_config_value; + u32 pll2_config_value; +}; + +static const struct yhgch_dislay_pll_config yhgch_pll_table[] = { + { 640, 480, CRT_PLL1_NS_25MHZ, CRT_PLL2_NS_25MHZ }, + { 800, 600, CRT_PLL1_NS_40MHZ, CRT_PLL2_NS_40MHZ }, + { 1024, 768, CRT_PLL1_NS_65MHZ, CRT_PLL2_NS_65MHZ }, + { 1280, 1024, CRT_PLL1_NS_108MHZ, CRT_PLL2_NS_108MHZ }, + { 1920, 1080, CRT_PLL1_NS_148MHZ, CRT_PLL2_NS_148MHZ }, +}; + +static inline unsigned long PADDING(unsigned long align, unsigned long data) +{ + return (((data) + (align) - 1) & (~((align) - 1))); +} + +static int yhgch_plane_atomic_check(struct drm_plane *plane, + struct drm_atomic_state *state) +{ + struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state, + plane); + struct drm_framebuffer *fb = new_plane_state->fb; + struct drm_crtc *crtc = new_plane_state->crtc; + struct drm_crtc_state *crtc_state; + u32 src_w = new_plane_state->src_w >> 16; + u32 src_h = new_plane_state->src_h >> 16; + + if (!crtc || !fb) + return 0; + + crtc_state = drm_atomic_get_crtc_state(state, crtc); + if (IS_ERR(crtc_state)) + return PTR_ERR(crtc_state); + + if (src_w != new_plane_state->crtc_w || src_h != new_plane_state->crtc_h) { + drm_dbg_atomic(plane->dev, "scale not support\n"); + return -EINVAL; + } + + if (new_plane_state->crtc_x < 0 || new_plane_state->crtc_y < 0) { + drm_dbg_atomic(plane->dev, "crtc_x/y of drm_plane state is invalid\n"); + return -EINVAL; + } + + if (!crtc_state->enable) + return 0; + + if (new_plane_state->crtc_x + new_plane_state->crtc_w > + crtc_state->adjusted_mode.hdisplay || + new_plane_state->crtc_y + new_plane_state->crtc_h > + crtc_state->adjusted_mode.vdisplay) { + drm_dbg_atomic(plane->dev, "visible portion of plane is invalid\n"); + return -EINVAL; + } + + if (new_plane_state->fb->pitches[0] % 16 != 0) { + drm_dbg_atomic(plane->dev, "wrong stride with 16-byte aligned\n"); + return -EINVAL; + } + return 0; +} + +static void yhgch_plane_atomic_update(struct drm_plane *plane, + struct drm_atomic_state *state) +{ + struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state, + plane); + u32 reg; + s64 gpu_addr = 0; + u32 line_l; + struct yhgch_drm_private *priv = to_yhgch_drm_private(plane->dev); + struct drm_gem_vram_object *gbo; + + if (!new_state->fb) + return; + + gbo = drm_gem_vram_of_gem(new_state->fb->obj[0]); + + gpu_addr = drm_gem_vram_offset(gbo); + if (gpu_addr < 0) + return; + + writel(gpu_addr, priv->mmio + YHGCH_CRT_FB_ADDRESS); + + reg = new_state->fb->width * (new_state->fb->format->cpp[0]); + + line_l = new_state->fb->pitches[0]; + writel(YHGCH_FIELD(YHGCH_CRT_FB_WIDTH_WIDTH, reg) | + YHGCH_FIELD(YHGCH_CRT_FB_WIDTH_OFFS, line_l), + priv->mmio + YHGCH_CRT_FB_WIDTH); + + /* SET PIXEL FORMAT */ + reg = readl(priv->mmio + YHGCH_CRT_DISP_CTL); + reg &= ~YHGCH_CRT_DISP_CTL_FORMAT_MASK; + reg |= YHGCH_FIELD(YHGCH_CRT_DISP_CTL_FORMAT, + new_state->fb->format->cpp[0] * 8 / 16); + writel(reg, priv->mmio + YHGCH_CRT_DISP_CTL); +} + +static const u32 channel_formats1[] = { + DRM_FORMAT_RGB565, DRM_FORMAT_BGR565, DRM_FORMAT_RGB888, + DRM_FORMAT_BGR888, DRM_FORMAT_XRGB8888, DRM_FORMAT_XBGR8888, + DRM_FORMAT_RGBA8888, DRM_FORMAT_BGRA8888, DRM_FORMAT_ARGB8888, + DRM_FORMAT_ABGR8888 +}; + +static struct drm_plane_funcs yhgch_plane_funcs = { + .update_plane = drm_atomic_helper_update_plane, + .disable_plane = drm_atomic_helper_disable_plane, + .destroy = drm_plane_cleanup, + .reset = drm_atomic_helper_plane_reset, + .atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_plane_destroy_state, +}; + +static const struct drm_plane_helper_funcs yhgch_plane_helper_funcs = { + DRM_GEM_VRAM_PLANE_HELPER_FUNCS, + .atomic_check = yhgch_plane_atomic_check, + .atomic_update = yhgch_plane_atomic_update, +}; + +static void yhgch_crtc_dpms(struct drm_crtc *crtc, u32 dpms) +{ + struct yhgch_drm_private *priv = to_yhgch_drm_private(crtc->dev); + u32 reg; + + reg = readl(priv->mmio + YHGCH_CRT_DISP_CTL); + reg &= ~YHGCH_CRT_DISP_CTL_DPMS_MASK; + reg |= YHGCH_FIELD(YHGCH_CRT_DISP_CTL_DPMS, dpms); + reg &= ~YHGCH_CRT_DISP_CTL_TIMING_MASK; + if (dpms == YHGCH_CRT_DPMS_ON) + reg |= YHGCH_CRT_DISP_CTL_TIMING(1); + writel(reg, priv->mmio + YHGCH_CRT_DISP_CTL); +} + +static void yhgch_crtc_atomic_enable(struct drm_crtc *crtc, + struct drm_atomic_state *old_state) +{ + u32 reg; + struct yhgch_drm_private *priv = to_yhgch_drm_private(crtc->dev); + + yhgch_set_power_mode(priv, YHGCH_PW_MODE_CTL_MODE_MODE0); + + /* Enable display power gate & LOCALMEM power gate */ + reg = readl(priv->mmio + YHGCH_CURRENT_GATE); + reg &= ~YHGCH_CURR_GATE_LOCALMEM_MASK; + reg &= ~YHGCH_CURR_GATE_DISPLAY_MASK; + reg |= YHGCH_CURR_GATE_LOCALMEM(1); + reg |= YHGCH_CURR_GATE_DISPLAY(1); + yhgch_set_current_gate(priv, reg); + yhgch_crtc_dpms(crtc, YHGCH_CRT_DPMS_ON); +} + +static void yhgch_crtc_atomic_disable(struct drm_crtc *crtc, + struct drm_atomic_state *old_state) +{ + u32 reg; + struct yhgch_drm_private *priv = to_yhgch_drm_private(crtc->dev); + + yhgch_crtc_dpms(crtc, YHGCH_CRT_DPMS_OFF); + + yhgch_set_power_mode(priv, YHGCH_PW_MODE_CTL_MODE_SLEEP); + + /* Enable display power gate & LOCALMEM power gate */ + reg = readl(priv->mmio + YHGCH_CURRENT_GATE); + reg &= ~YHGCH_CURR_GATE_LOCALMEM_MASK; + reg &= ~YHGCH_CURR_GATE_DISPLAY_MASK; + reg |= YHGCH_CURR_GATE_LOCALMEM(0); + reg |= YHGCH_CURR_GATE_DISPLAY(0); + yhgch_set_current_gate(priv, reg); +} + +static enum drm_mode_status +yhgch_crtc_mode_valid(struct drm_crtc *crtc, + const struct drm_display_mode *mode) +{ + size_t i = 0; + int vrefresh = drm_mode_vrefresh(mode); + + if (vrefresh < 59 || vrefresh > 61) + return MODE_NOCLOCK; + + for (i = 0; i < ARRAY_SIZE(yhgch_pll_table); i++) { + if (yhgch_pll_table[i].hdisplay == mode->hdisplay && + yhgch_pll_table[i].vdisplay == mode->vdisplay) + return MODE_OK; + } + + return MODE_BAD; +} + +static void set_vclock_yhgch(struct drm_device *dev, u64 pll) +{ + u32 val; + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); + + val = readl(priv->mmio + CRT_PLL1_NS); + val &= ~(CRT_PLL1_NS_OUTER_BYPASS(1)); + writel(val, priv->mmio + CRT_PLL1_NS); + + val = CRT_PLL1_NS_INTER_BYPASS(1) | CRT_PLL1_NS_POWERON(1); + writel(val, priv->mmio + CRT_PLL1_NS); + + writel(pll, priv->mmio + CRT_PLL1_NS); + + usleep_range(1000, 2000); + + val = pll & ~(CRT_PLL1_NS_POWERON(1)); + writel(val, priv->mmio + CRT_PLL1_NS); + + usleep_range(1000, 2000); + + val &= ~(CRT_PLL1_NS_INTER_BYPASS(1)); + writel(val, priv->mmio + CRT_PLL1_NS); + + usleep_range(1000, 2000); + + val |= CRT_PLL1_NS_OUTER_BYPASS(1); + writel(val, priv->mmio + CRT_PLL1_NS); +} + +static void get_pll_config(u64 x, u64 y, u32 *pll1, u32 *pll2) +{ + size_t i; + size_t count = ARRAY_SIZE(yhgch_pll_table); + + for (i = 0; i < count; i++) { + if (yhgch_pll_table[i].hdisplay == x && + yhgch_pll_table[i].vdisplay == y) { + *pll1 = yhgch_pll_table[i].pll1_config_value; + *pll2 = yhgch_pll_table[i].pll2_config_value; + return; + } + } + + /* if found none, we use default value */ + *pll1 = CRT_PLL1_NS_25MHZ; + *pll2 = CRT_PLL2_NS_25MHZ; +} + +/* + * This function takes care the extra registers and bit fields required to + * setup a mode in board. + * Explanation about Display Control register: + * FPGA only supports 7 predefined pixel clocks, and clock select is + * in bit 4:0 of new register 0x802a8. + */ +static u32 display_ctrl_adjust(struct drm_device *dev, + struct drm_display_mode *mode, + u32 ctrl) +{ + u64 x, y; + u32 pll1; /* bit[31:0] of PLL */ + u32 pll2; /* bit[63:32] of PLL */ + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); + + x = mode->hdisplay; + y = mode->vdisplay; + + get_pll_config(x, y, &pll1, &pll2); + writel(pll2, priv->mmio + CRT_PLL2_NS); + set_vclock_yhgch(dev, pll1); + + /* + * yhgch has to set up the top-left and bottom-right + * registers as well. + * Note that normal chip only use those two register for + * auto-centering mode. + */ + writel(YHGCH_FIELD(YHGCH_CRT_AUTO_CENTERING_TL_TOP, 0) | + YHGCH_FIELD(YHGCH_CRT_AUTO_CENTERING_TL_LEFT, 0), + priv->mmio + YHGCH_CRT_AUTO_CENTERING_TL); + + writel(YHGCH_FIELD(YHGCH_CRT_AUTO_CENTERING_BR_BOTTOM, y - 1) | + YHGCH_FIELD(YHGCH_CRT_AUTO_CENTERING_BR_RIGHT, x - 1), + priv->mmio + YHGCH_CRT_AUTO_CENTERING_BR); + + /* + * Assume common fields in ctrl have been properly set before + * calling this function. + * This function only sets the extra fields in ctrl. + */ + + /* Set bit 25 of display controller: Select CRT or VGA clock */ + ctrl &= ~YHGCH_CRT_DISP_CTL_CRTSELECT_MASK; + ctrl &= ~YHGCH_CRT_DISP_CTL_CLOCK_PHASE_MASK; + + ctrl |= YHGCH_CRT_DISP_CTL_CRTSELECT(YHGCH_CRTSELECT_CRT); + + /* clock_phase_polarity is 0 */ + ctrl |= YHGCH_CRT_DISP_CTL_CLOCK_PHASE(0); + ctrl |= YHGCH_FIELD(YHGCH_CRT_DISP_CTL_FORMAT, 2); + + writel(ctrl, priv->mmio + YHGCH_CRT_DISP_CTL); + + return ctrl; +} + +static void yhgch_crtc_mode_set_nofb(struct drm_crtc *crtc) +{ + u32 val; + struct drm_display_mode *mode = &crtc->state->mode; + struct drm_device *dev = crtc->dev; + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); + u32 width = mode->hsync_end - mode->hsync_start; + u32 height = mode->vsync_end - mode->vsync_start; + + //writel(format_pll_reg(), priv->mmio + YHGCH_CRT_PLL_CTRL); + writel(YHGCH_FIELD(YHGCH_CRT_HORZ_TOTAL_TOTAL, mode->htotal - 1) | + YHGCH_FIELD(YHGCH_CRT_HORZ_TOTAL_DISP_END, mode->hdisplay - 1), + priv->mmio + YHGCH_CRT_HORZ_TOTAL); + + writel(YHGCH_FIELD(YHGCH_CRT_HORZ_SYNC_WIDTH, width) | + YHGCH_FIELD(YHGCH_CRT_HORZ_SYNC_START, mode->hsync_start - 1), + priv->mmio + YHGCH_CRT_HORZ_SYNC); + + writel(YHGCH_FIELD(YHGCH_CRT_VERT_TOTAL_TOTAL, mode->vtotal - 1) | + YHGCH_FIELD(YHGCH_CRT_VERT_TOTAL_DISP_END, mode->vdisplay - 1), + priv->mmio + YHGCH_CRT_VERT_TOTAL); + + writel(YHGCH_FIELD(YHGCH_CRT_VERT_SYNC_HEIGHT, height) | + YHGCH_FIELD(YHGCH_CRT_VERT_SYNC_START, mode->vsync_start - 1), + priv->mmio + YHGCH_CRT_VERT_SYNC); + + val = YHGCH_FIELD(YHGCH_CRT_DISP_CTL_VSYNC_PHASE, 0); + val |= YHGCH_FIELD(YHGCH_CRT_DISP_CTL_HSYNC_PHASE, 0); + val |= YHGCH_CRT_DISP_CTL_TIMING(1); + val |= YHGCH_CRT_DISP_CTL_PLANE(1); + + display_ctrl_adjust(dev, mode, val); +} + +static void yhgch_crtc_atomic_begin(struct drm_crtc *crtc, + struct drm_atomic_state *old_state) +{ + u32 reg; + struct drm_device *dev = crtc->dev; + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); + + yhgch_set_power_mode(priv, YHGCH_PW_MODE_CTL_MODE_MODE0); + + /* Enable display power gate & LOCALMEM power gate */ + reg = readl(priv->mmio + YHGCH_CURRENT_GATE); + reg &= ~YHGCH_CURR_GATE_DISPLAY_MASK; + reg &= ~YHGCH_CURR_GATE_LOCALMEM_MASK; + reg |= YHGCH_CURR_GATE_DISPLAY(1); + reg |= YHGCH_CURR_GATE_LOCALMEM(1); + yhgch_set_current_gate(priv, reg); + + /* We can add more initialization as needed. */ +} + +static void yhgch_crtc_atomic_flush(struct drm_crtc *crtc, + struct drm_atomic_state *state) + +{ + unsigned long flags; + + spin_lock_irqsave(&crtc->dev->event_lock, flags); + if (crtc->state->event) + drm_crtc_send_vblank_event(crtc, crtc->state->event); + crtc->state->event = NULL; + spin_unlock_irqrestore(&crtc->dev->event_lock, flags); +} + +static int yhgch_crtc_enable_vblank(struct drm_crtc *crtc) +{ + struct yhgch_drm_private *priv = to_yhgch_drm_private(crtc->dev); + + writel(YHGCH_RAW_INTERRUPT_EN_VBLANK(1), + priv->mmio + YHGCH_RAW_INTERRUPT_EN); + + return 0; +} + +static void yhgch_crtc_disable_vblank(struct drm_crtc *crtc) +{ + struct yhgch_drm_private *priv = to_yhgch_drm_private(crtc->dev); + + writel(YHGCH_RAW_INTERRUPT_EN_VBLANK(0), + priv->mmio + YHGCH_RAW_INTERRUPT_EN); +} + +static const struct drm_crtc_funcs yhgch_crtc_funcs = { + .page_flip = drm_atomic_helper_page_flip, + .set_config = drm_atomic_helper_set_config, + .destroy = drm_crtc_cleanup, + .reset = drm_atomic_helper_crtc_reset, + .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state, + .enable_vblank = yhgch_crtc_enable_vblank, + .disable_vblank = yhgch_crtc_disable_vblank, + +}; + +static const struct drm_crtc_helper_funcs yhgch_crtc_helper_funcs = { + .mode_set_nofb = yhgch_crtc_mode_set_nofb, + .atomic_begin = yhgch_crtc_atomic_begin, + .atomic_flush = yhgch_crtc_atomic_flush, + .atomic_enable = yhgch_crtc_atomic_enable, + .atomic_disable = yhgch_crtc_atomic_disable, + .mode_valid = yhgch_crtc_mode_valid, +}; + +int yhgch_de_init(struct yhgch_drm_private *priv) +{ + struct drm_device *dev = &priv->dev; + struct drm_crtc *crtc = &priv->crtc; + struct drm_plane *plane = &priv->primary_plane; + int ret; + + ret = drm_universal_plane_init(dev, plane, 1, &yhgch_plane_funcs, + channel_formats1, + ARRAY_SIZE(channel_formats1), + NULL, + DRM_PLANE_TYPE_PRIMARY, + NULL); + + if (ret) { + drm_err(dev, "failed to init plane: %d\n", ret); + return ret; + } + + drm_plane_helper_add(plane, &yhgch_plane_helper_funcs); + + ret = drm_crtc_init_with_planes(dev, crtc, plane, + NULL, &yhgch_crtc_funcs, NULL); + if (ret) { + drm_err(dev, "failed to init crtc: %d\n", ret); + return ret; + } + + ret = drm_mode_crtc_set_gamma_size(crtc, 256); + if (ret) { + drm_err(dev, "failed to set gamma size: %d\n", ret); + return ret; + } + drm_crtc_helper_add(crtc, &yhgch_crtc_helper_funcs); + + return 0; +} diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.c b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.c new file mode 100644 index 000000000000..382609bbf08e --- /dev/null +++ b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.c @@ -0,0 +1,374 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include "yhgch_drm_drv.h" + +#include <linux/module.h> +#include <linux/pci.h> + +#include <linux/aperture.h> +#include <drm/clients/drm_client_setup.h> + +#include <drm/drm_atomic_helper.h> +#include <drm/drm_drv.h> +#include <drm/drm_fbdev_ttm.h> + +#include <drm/drm_gem_framebuffer_helper.h> +#include <drm/drm_gem_vram_helper.h> +#include <drm/drm_managed.h> +#include <drm/drm_module.h> +#include <drm/drm_vblank.h> + +#include "yhgch_drm_drv.h" +#include "yhgch_drm_regs.h" + +#define MEM_SIZE_RESERVE4KVM 0x200000 + +DEFINE_DRM_GEM_FOPS(yhgch_fops); +static irqreturn_t yhgch_drm_interrupt(int irq, void *arg) +{ + struct drm_device *dev = (struct drm_device *)arg; + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); + u32 status; + + status = readl(priv->mmio + YHGCH_RAW_INTERRUPT); + + if (status & YHGCH_RAW_INTERRUPT_VBLANK(1)) { + writel(YHGCH_RAW_INTERRUPT_VBLANK(1), + priv->mmio + YHGCH_RAW_INTERRUPT); + drm_handle_vblank(dev, 0); + } + + return IRQ_HANDLED; +} + +int yhgch_dumb_create(struct drm_file *file, struct drm_device *dev, + struct drm_mode_create_dumb *args) +{ + return drm_gem_vram_fill_create_dumb(file, dev, 0, 16, args); +} + +static struct drm_driver yhgch_driver = { + .driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC, + .fops = &yhgch_fops, + .name = "yhgch", + .desc = "yhgch drm driver", + .major = 3, + .minor = 1, + .debugfs_init = drm_vram_mm_debugfs_init, + .dumb_create = yhgch_dumb_create, + .dumb_map_offset = drm_gem_ttm_dumb_map_offset, + DRM_FBDEV_TTM_DRIVER_OPS, +}; + +static int __maybe_unused yhgch_pm_suspend(struct device *dev) +{ + struct drm_device *drm_dev = dev_get_drvdata(dev); + + return drm_mode_config_helper_suspend(drm_dev); +} + +static int __maybe_unused yhgch_pm_resume(struct device *dev) +{ + struct drm_device *drm_dev = dev_get_drvdata(dev); + + return drm_mode_config_helper_resume(drm_dev); +} + +static const struct dev_pm_ops yhgch_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(yhgch_pm_suspend, + yhgch_pm_resume) +}; + +static const struct drm_mode_config_funcs yhgch_mode_funcs = { + .mode_valid = drm_vram_helper_mode_valid, + .atomic_check = drm_atomic_helper_check, + .atomic_commit = drm_atomic_helper_commit, + .fb_create = drm_gem_fb_create, +}; + +static int yhgch_kms_init(struct yhgch_drm_private *priv) +{ + struct drm_device *dev = &priv->dev; + int ret; + + ret = drmm_mode_config_init(dev); + if (ret) + return ret; + + priv->dev.mode_config.min_width = 0; + priv->dev.mode_config.min_height = 0; + priv->dev.mode_config.max_width = 1920; + priv->dev.mode_config.max_height = 1200; + dev->mode_config.preferred_depth = 24; + priv->dev.mode_config.prefer_shadow = 1; + priv->dev.mode_config.funcs = (void *)&yhgch_mode_funcs; + + ret = yhgch_de_init(priv); + if (ret) { + drm_err(dev, "failed to init de: %d\n", ret); + return ret; + } + + ret = yhgch_vdac_init(priv); + if (ret) { + drm_err(dev, "failed to init vdac: %d\n", ret); + return ret; + } + + return 0; +} + +/* + * It can operate in one of three modes: 0, 1 or Sleep. + */ +void yhgch_set_power_mode(struct yhgch_drm_private *priv, u32 power_mode) +{ + unsigned int control_value = 0; + void __iomem *mmio = priv->mmio; + u32 input = 1; + + if (power_mode > YHGCH_PW_MODE_CTL_MODE_SLEEP) + return; + + if (power_mode == YHGCH_PW_MODE_CTL_MODE_SLEEP) + input = 0; + + control_value = readl(mmio + YHGCH_POWER_MODE_CTRL); + control_value &= ~(YHGCH_PW_MODE_CTL_MODE_MASK | + YHGCH_PW_MODE_CTL_OSC_INPUT_MASK); + control_value |= YHGCH_FIELD(YHGCH_PW_MODE_CTL_MODE, power_mode); + control_value |= YHGCH_FIELD(YHGCH_PW_MODE_CTL_OSC_INPUT, input); + writel(control_value, mmio + YHGCH_POWER_MODE_CTRL); +} + +void yhgch_set_current_gate(struct yhgch_drm_private *priv, unsigned int gate) +{ + u32 gate_reg; + u32 mode; + void __iomem *mmio = priv->mmio; + + /* Get current power mode. */ + mode = (readl(mmio + YHGCH_POWER_MODE_CTRL) & + YHGCH_PW_MODE_CTL_MODE_MASK) >> YHGCH_PW_MODE_CTL_MODE_SHIFT; + + switch (mode) { + case YHGCH_PW_MODE_CTL_MODE_MODE0: + gate_reg = YHGCH_MODE0_GATE; + break; + + case YHGCH_PW_MODE_CTL_MODE_MODE1: + gate_reg = YHGCH_MODE1_GATE; + break; + + default: + gate_reg = YHGCH_MODE0_GATE; + break; + } + writel(gate, mmio + gate_reg); +} + +static void yhgch_hw_config(struct yhgch_drm_private *priv) +{ + u32 reg; + + /* On hardware reset, power mode 0 is default. */ + yhgch_set_power_mode(priv, YHGCH_PW_MODE_CTL_MODE_MODE0); + + /* Enable display power gate & LOCALMEM power gate */ + reg = readl(priv->mmio + YHGCH_CURRENT_GATE); + reg &= ~YHGCH_CURR_GATE_DISPLAY_MASK; + reg &= ~YHGCH_CURR_GATE_LOCALMEM_MASK; + reg |= YHGCH_CURR_GATE_DISPLAY(1); + reg |= YHGCH_CURR_GATE_LOCALMEM(1); + + yhgch_set_current_gate(priv, reg); + + /* + * Reset the memory controller. If the memory controller + * is not reset in chip,the system might hang when sw accesses + * the memory.The memory should be resetted after + * changing the MXCLK. + */ + reg = readl(priv->mmio + YHGCH_MISC_CTRL); + reg &= ~YHGCH_MSCCTL_LOCALMEM_RESET_MASK; + reg |= YHGCH_MSCCTL_LOCALMEM_RESET(0); + writel(reg, priv->mmio + YHGCH_MISC_CTRL); + + reg &= ~YHGCH_MSCCTL_LOCALMEM_RESET_MASK; + reg |= YHGCH_MSCCTL_LOCALMEM_RESET(1); + + writel(reg, priv->mmio + YHGCH_MISC_CTRL); +} + +static int yhgch_hw_map(struct yhgch_drm_private *priv) +{ + struct drm_device *dev = &priv->dev; + struct pci_dev *pdev = to_pci_dev(dev->dev); + resource_size_t ioaddr, iosize; + + ioaddr = pci_resource_start(pdev, 1); + iosize = pci_resource_len(pdev, 1); + priv->mmio = devm_ioremap(dev->dev, ioaddr, iosize); + if (!priv->mmio) { + drm_err(dev, "Cannot map mmio region\n"); + return -ENOMEM; + } + return 0; +} + +static int yhgch_hw_init(struct yhgch_drm_private *priv) +{ + int ret; + + ret = yhgch_hw_map(priv); + if (ret) + return ret; + yhgch_hw_config(priv); + return 0; +} + +static int yhgch_unload(struct drm_device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev->dev); + + drm_atomic_helper_shutdown(dev); + + free_irq(pdev->irq, dev); + + pci_disable_msi(to_pci_dev(dev->dev)); + + return 0; +} + +static int yhgch_load(struct drm_device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev->dev); + int ret; + + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); + + ret = yhgch_hw_init(priv); + if (ret) + goto err; + ret = drmm_vram_helper_init(dev, pci_resource_start(pdev, 0), + pci_resource_len(pdev, 0)); + if (ret) { + drm_err(dev, "Error initializing VRAM MM; %d\n", ret); + goto err; + } + ret = yhgch_kms_init(priv); + if (ret) + goto err; + /* + * ret = drm_vblank_init(dev, dev->mode_config.num_crtc); + * if (ret) { + * drm_err(dev, "failed to initialize vblank: %d\n", ret); + * goto err; + * } + */ + ret = pci_enable_msi(pdev); + if (ret) { + drm_warn(dev, "enabling MSI failed: %d\n", ret); + } else { + /* PCI devices require shared interrupts. */ + ret = request_irq(pdev->irq, yhgch_drm_interrupt, IRQF_SHARED, + dev->driver->name, dev); + if (ret) + drm_warn(dev, "install irq failed: %d\n", ret); + } + + /* reset all the states of crtc/plane/encoder/connector */ + drm_mode_config_reset(dev); + return 0; + +err: + yhgch_unload(dev); + drm_err(dev, "failed to initialize drm driver: %d\n", ret); + return ret; +} + +static int yhgch_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct yhgch_drm_private *priv; + struct drm_device *dev; + int ret; + + ret = aperture_remove_conflicting_pci_devices(pdev, yhgch_driver.name); + + if (ret) + return ret; + + priv = devm_drm_dev_alloc(&pdev->dev, &yhgch_driver, + struct yhgch_drm_private, dev); + + if (IS_ERR(priv)) { + DRM_ERROR("failed to allocate drm_device\n"); + return PTR_ERR(priv); + } + + dev = &priv->dev; + pci_set_drvdata(pdev, dev); + + ret = pcim_enable_device(pdev); + if (ret) { + drm_err(dev, "failed to enable pci device: %d\n", ret); + goto err_return; + } + + ret = yhgch_load(dev); + if (ret) { + drm_err(dev, "failed to load yhgch: %d\n", ret); + goto err_return; + } + + ret = drm_dev_register(dev, 0); + if (ret) { + drm_err(dev, "failed to register drv for userspace access: %d\n", + ret); + goto err_unload; + } + drm_client_setup(dev, NULL); + + return 0; + +err_unload: + yhgch_unload(dev); +err_return: + return ret; +} + +static void yhgch_pci_remove(struct pci_dev *pdev) +{ + struct drm_device *dev = pci_get_drvdata(pdev); + + drm_dev_unregister(dev); + yhgch_unload(dev); +} + +static void yhgch_pci_shutdown(struct pci_dev *pdev) +{ + drm_atomic_helper_shutdown(pci_get_drvdata(pdev)); +} + +static struct pci_device_id yhgch_pci_table[] = { + { 0x1bd4, 0x0750, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { 0, } +}; + +static struct pci_driver yhgch_pci_driver = { + .name = "yhgch-drm", + .id_table = yhgch_pci_table, + .probe = yhgch_pci_probe, + .remove = yhgch_pci_remove, + .shutdown = yhgch_pci_shutdown, + .driver.pm = &yhgch_pm_ops, +}; + +drm_module_pci_driver(yhgch_pci_driver); + +MODULE_DEVICE_TABLE(pci, yhgch_pci_table); +MODULE_AUTHOR(""); +MODULE_DESCRIPTION("DRM Driver for YhgchBMC"); +MODULE_LICENSE("GPL"); +MODULE_VERSION("3.1"); diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.h b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.h new file mode 100644 index 000000000000..a2d0b148d2c2 --- /dev/null +++ b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.h @@ -0,0 +1,53 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef YHGCH_DRM_DRV_H +#define YHGCH_DRM_DRV_H + +#include <linux/gpio/consumer.h> +#include <linux/i2c-algo-bit.h> +#include <linux/i2c.h> +#include <linux/version.h> +#include <drm/drm_framebuffer.h> +#include <drm/drm_encoder.h> + +struct yhgch_connector { + struct drm_connector base; + struct i2c_adapter adapter; + struct i2c_algo_bit_data bit_data; +}; + +struct yhgch_drm_private { + /* hw */ + void __iomem *mmio; + + /* drm */ + struct drm_device dev; + struct drm_plane primary_plane; + struct drm_crtc crtc; + struct drm_encoder encoder; + struct yhgch_connector connector; +}; + +static inline struct yhgch_connector *to_yhgch_connector(struct drm_connector *connector) +{ + return container_of(connector, struct yhgch_connector, base); +} + +static inline struct yhgch_drm_private *to_yhgch_drm_private(struct drm_device *dev) +{ + return container_of(dev, struct yhgch_drm_private, dev); +} + +void yhgch_set_power_mode(struct yhgch_drm_private *priv, u32 power_mode); +void yhgch_set_current_gate(struct yhgch_drm_private *priv, + u32 gate); + +int yhgch_de_init(struct yhgch_drm_private *priv); +int yhgch_vdac_init(struct yhgch_drm_private *priv); +int yhgch_mm_init(struct yhgch_drm_private *yhgch); +int yhgch_ddc_create(struct drm_device *drm_dev, struct yhgch_connector *connector); + +int yhgch_dumb_create(struct drm_file *file, struct drm_device *dev, + struct drm_mode_create_dumb *args); + +#endif diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_i2c.c b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_i2c.c new file mode 100644 index 000000000000..5a826cb2ab46 --- /dev/null +++ b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_i2c.c @@ -0,0 +1,89 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include <linux/delay.h> +#include <linux/pci.h> + +#include <drm/drm_atomic_helper.h> +#include <drm/drm_probe_helper.h> + +#include "yhgch_drm_drv.h" + +#define GPIO_DATA 0x0802A0 +#define GPIO_DATA_DIRECTION 0x0802A4 + +#define I2C_SCL_MASK BIT(0) +#define I2C_SDA_MASK BIT(1) + +static void yhgch_set_i2c_signal(void *data, u32 mask, int value) +{ + struct yhgch_connector *yhgch_connector = data; + struct yhgch_drm_private *priv = to_yhgch_drm_private(yhgch_connector->base.dev); + u32 tmp_dir = readl(priv->mmio + GPIO_DATA_DIRECTION); + + if (value) { + tmp_dir &= ~mask; + writel(tmp_dir, priv->mmio + GPIO_DATA_DIRECTION); + } else { + u32 tmp_data = readl(priv->mmio + GPIO_DATA); + + tmp_data &= ~mask; + writel(tmp_data, priv->mmio + GPIO_DATA); + + tmp_dir |= mask; + writel(tmp_dir, priv->mmio + GPIO_DATA_DIRECTION); + } +} + +static int yhgch_get_i2c_signal(void *data, u32 mask) +{ + struct yhgch_connector *yhgch_connector = data; + struct yhgch_drm_private *priv = to_yhgch_drm_private(yhgch_connector->base.dev); + u32 tmp_dir = readl(priv->mmio + GPIO_DATA_DIRECTION); + + if ((tmp_dir & mask) != mask) { + tmp_dir &= ~mask; + writel(tmp_dir, priv->mmio + GPIO_DATA_DIRECTION); + } + + return (readl(priv->mmio + GPIO_DATA) & mask) ? 1 : 0; +} + +static void yhgch_ddc_setsda(void *data, int state) +{ + yhgch_set_i2c_signal(data, I2C_SDA_MASK, state); +} + +static void yhgch_ddc_setscl(void *data, int state) +{ + yhgch_set_i2c_signal(data, I2C_SCL_MASK, state); +} + +static int yhgch_ddc_getsda(void *data) +{ + return yhgch_get_i2c_signal(data, I2C_SDA_MASK); +} + +static int yhgch_ddc_getscl(void *data) +{ + return yhgch_get_i2c_signal(data, I2C_SCL_MASK); +} + +int yhgch_ddc_create(struct drm_device *drm_dev, + struct yhgch_connector *connector) +{ + connector->adapter.owner = THIS_MODULE; + snprintf(connector->adapter.name, I2C_NAME_SIZE, "INS i2c bit bus"); + connector->adapter.dev.parent = drm_dev->dev; + i2c_set_adapdata(&connector->adapter, connector); + connector->adapter.algo_data = &connector->bit_data; + + connector->bit_data.udelay = 20; + connector->bit_data.timeout = usecs_to_jiffies(2000); + connector->bit_data.data = connector; + connector->bit_data.setsda = yhgch_ddc_setsda; + connector->bit_data.setscl = yhgch_ddc_setscl; + connector->bit_data.getsda = yhgch_ddc_getsda; + connector->bit_data.getscl = yhgch_ddc_getscl; + + return i2c_bit_add_bus(&connector->adapter); +} diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_regs.h b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_regs.h new file mode 100644 index 000000000000..d707f5186ab4 --- /dev/null +++ b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_regs.h @@ -0,0 +1,209 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef YHGCH_DRM_HW_H +#define YHGCH_DRM_HW_H + +/* register definition */ +#define YHGCH_MISC_CTRL 0x4 + +#define YHGCH_MSCCTL_LOCALMEM_RESET(x) ((x) << 6) +#define YHGCH_MSCCTL_LOCALMEM_RESET_MASK 0x40 + +#define YHGCH_CURRENT_GATE 0x000040 +#define YHGCH_CURR_GATE_DISPLAY(x) ((x) << 2) +#define YHGCH_CURR_GATE_DISPLAY_MASK 0x4 + +#define YHGCH_CURR_GATE_LOCALMEM(x) ((x) << 1) +#define YHGCH_CURR_GATE_LOCALMEM_MASK 0x2 + +#define YHGCH_MODE0_GATE 0x000044 +#define YHGCH_MODE1_GATE 0x000048 +#define YHGCH_POWER_MODE_CTRL 0x00004C + +#define YHGCH_PW_MODE_CTL_OSC_INPUT(x) ((x) << 3) +#define YHGCH_PW_MODE_CTL_OSC_INPUT_MASK 0x8 + +#define YHGCH_PW_MODE_CTL_MODE(x) ((x) << 0) +#define YHGCH_PW_MODE_CTL_MODE_MASK 0x03 +#define YHGCH_PW_MODE_CTL_MODE_SHIFT 0 + +#define YHGCH_PW_MODE_CTL_MODE_MODE0 0 +#define YHGCH_PW_MODE_CTL_MODE_MODE1 1 +#define YHGCH_PW_MODE_CTL_MODE_SLEEP 2 + +//#define YHGCH_CRT_PLL_CTRL 0x000060 + +#define YHGCH_PLL_CTRL_BYPASS(x) ((x) << 18) +#define YHGCH_PLL_CTRL_BYPASS_MASK 0x40000 + +#define YHGCH_PLL_CTRL_POWER(x) ((x) << 17) +#define YHGCH_PLL_CTRL_POWER_MASK 0x20000 + +#define YHGCH_PLL_CTRL_INPUT(x) ((x) << 16) +#define YHGCH_PLL_CTRL_INPUT_MASK 0x10000 + +#define YHGCH_PLL_CTRL_POD(x) ((x) << 14) +#define YHGCH_PLL_CTRL_POD_MASK 0xC000 + +#define YHGCH_PLL_CTRL_OD(x) ((x) << 12) +#define YHGCH_PLL_CTRL_OD_MASK 0x3000 + +#define YHGCH_PLL_CTRL_N(x) ((x) << 8) +#define YHGCH_PLL_CTRL_N_MASK 0xF00 + +#define YHGCH_PLL_CTRL_M(x) ((x) << 0) +#define YHGCH_PLL_CTRL_M_MASK 0xFF + +#define YHGCH_CRT_DISP_CTL 0x80200 + +#define YHGCH_CRT_DISP_CTL_DPMS(x) ((x) << 30) +#define YHGCH_CRT_DISP_CTL_DPMS_MASK 0xc0000000 + +#define YHGCH_CRT_DPMS_ON 0 +#define YHGCH_CRT_DPMS_OFF 3 + +#define YHGCH_CRT_DISP_CTL_CRTSELECT(x) ((x) << 25) +#define YHGCH_CRT_DISP_CTL_CRTSELECT_MASK 0x2000000 + +#define YHGCH_CRTSELECT_CRT 1 + +#define YHGCH_CRT_DISP_CTL_CLOCK_PHASE(x) ((x) << 14) +#define YHGCH_CRT_DISP_CTL_CLOCK_PHASE_MASK 0x4000 + +#define YHGCH_CRT_DISP_CTL_VSYNC_PHASE(x) ((x) << 13) +#define YHGCH_CRT_DISP_CTL_VSYNC_PHASE_MASK 0x2000 + +#define YHGCH_CRT_DISP_CTL_HSYNC_PHASE(x) ((x) << 12) +#define YHGCH_CRT_DISP_CTL_HSYNC_PHASE_MASK 0x1000 + +#define YHGCH_CRT_DISP_CTL_TIMING(x) ((x) << 8) +#define YHGCH_CRT_DISP_CTL_TIMING_MASK 0x100 + +#define YHGCH_CRT_DISP_CTL_PLANE(x) ((x) << 2) +#define YHGCH_CRT_DISP_CTL_PLANE_MASK 4 + +#define YHGCH_CRT_DISP_CTL_FORMAT(x) ((x) << 0) +#define YHGCH_CRT_DISP_CTL_FORMAT_MASK 0x03 + +#define YHGCH_CRT_FB_ADDRESS 0x080204 + +#define YHGCH_CRT_FB_WIDTH 0x080208 +#define YHGCH_CRT_FB_WIDTH_WIDTH(x) ((x) << 16) +#define YHGCH_CRT_FB_WIDTH_WIDTH_MASK 0x3FFF0000 +#define YHGCH_CRT_FB_WIDTH_OFFS(x) ((x) << 0) +#define YHGCH_CRT_FB_WIDTH_OFFS_MASK 0x3FFF + +#define YHGCH_CRT_HORZ_TOTAL 0x08020C +#define YHGCH_CRT_HORZ_TOTAL_TOTAL(x) ((x) << 16) +#define YHGCH_CRT_HORZ_TOTAL_TOTAL_MASK 0xFFF0000 + +#define YHGCH_CRT_HORZ_TOTAL_DISP_END(x) ((x) << 0) +#define YHGCH_CRT_HORZ_TOTAL_DISP_END_MASK 0xFFF + +#define YHGCH_CRT_HORZ_SYNC 0x080210 +#define YHGCH_CRT_HORZ_SYNC_WIDTH(x) ((x) << 16) +#define YHGCH_CRT_HORZ_SYNC_WIDTH_MASK 0xFF0000 + +#define YHGCH_CRT_HORZ_SYNC_START(x) ((x) << 0) +#define YHGCH_CRT_HORZ_SYNC_START_MASK 0xFFF + +#define YHGCH_CRT_VERT_TOTAL 0x080214 +#define YHGCH_CRT_VERT_TOTAL_TOTAL(x) ((x) << 16) +#define YHGCH_CRT_VERT_TOTAL_TOTAL_MASK 0x7FFF0000 + +#define YHGCH_CRT_VERT_TOTAL_DISP_END(x) ((x) << 0) +#define YHGCH_CRT_VERT_TOTAL_DISP_END_MASK 0x7FF + +#define YHGCH_CRT_VERT_SYNC 0x080218 +#define YHGCH_CRT_VERT_SYNC_HEIGHT(x) ((x) << 16) +#define YHGCH_CRT_VERT_SYNC_HEIGHT_MASK 0x3F0000 + +#define YHGCH_CRT_VERT_SYNC_START(x) ((x) << 0) +#define YHGCH_CRT_VERT_SYNC_START_MASK 0x7FF + +/* Hardware Cursor */ +#define YHGCH_HWC_ADDRESS 0x080230 +#define YHGCH_HWC_ADDRESS_ENABLE(x) ((x) << 31) +#define YHGCH_HWC_ADDRESS_ENABLE_MASK 0x80000000 +#define YHGCH_HWC_ADDRESS_ADDRESS(x) ((x) << 0) +#define YHGCH_HWC_ADDRESS_ADDRESS_MASK 0xFFFFFFF + +#define YHGCH_HWC_LOCATION 0x080234 +#define YHGCH_HWC_LOCATION_TOP(x) ((x) << 27) +#define YHGCH_HWC_LOCATION_TOP_MASK 0x8000000 +#define YHGCH_HWC_LOCATION_Y(x) ((x) << 16) +#define YHGCH_HWC_LOCATION_Y_MASK 0x7FF0000 +#define YHGCH_HWC_LOCATION_LEFT(x) ((x) << 11) +#define YHGCH_HWC_LOCATION_LEFT_MASK 0x800 +#define YHGCH_HWC_LOCATION_X(x) ((x) << 0) +#define YHGCH_HWC_LOCATION_X_MASK 0x7FF + +#define YHGCH_HWC_COLOR_12 0x080238 +#define YHGCH_HWC_COLOR_12_2_RGB(x) ((x) << 16) +#define YHGCH_HWC_COLOR_12_2_RGB_MASK 0xFFFF0000 +#define YHGCH_HWC_COLOR_12_1_RGB(x) ((x) << 0) +#define YHGCH_HWC_COLOR_12_1_RGB_MASK 0xFFFF + +#define YHGCH_HWC_COLOR_3 0x08023C +#define YHGCH_HWC_COLOR_3_RGB(x) ((x) << 0) +#define YHGCH_HWC_COLOR_3_RGB_MASK 0xFFFF + +/* Auto Centering */ +#define YHGCH_CRT_AUTO_CENTERING_TL 0x080280 +#define YHGCH_CRT_AUTO_CENTERING_TL_TOP(x) ((x) << 16) +#define YHGCH_CRT_AUTO_CENTERING_TL_TOP_MASK 0x7FF0000 + +#define YHGCH_CRT_AUTO_CENTERING_TL_LEFT(x) ((x) << 0) +#define YHGCH_CRT_AUTO_CENTERING_TL_LEFT_MASK 0x7FF + +#define YHGCH_CRT_AUTO_CENTERING_BR 0x080284 +#define YHGCH_CRT_AUTO_CENTERING_BR_BOTTOM(x) ((x) << 16) +#define YHGCH_CRT_AUTO_CENTERING_BR_BOTTOM_MASK 0x7FF0000 + +#define YHGCH_CRT_AUTO_CENTERING_BR_RIGHT(x) ((x) << 0) +#define YHGCH_CRT_AUTO_CENTERING_BR_RIGHT_MASK 0x7FF + +/* register to control panel output */ +#define YHGCH_DISPLAY_CONTROL_HISILE 0x80288 +#define YHGCH_DISPLAY_CONTROL_FPVDDEN(x) ((x) << 0) +#define YHGCH_DISPLAY_CONTROL_PANELDATE(x) ((x) << 1) +#define YHGCH_DISPLAY_CONTROL_FPEN(x) ((x) << 2) +#define YHGCH_DISPLAY_CONTROL_VBIASEN(x) ((x) << 3) + +#define YHGCH_RAW_INTERRUPT 0x80290 +#define YHGCH_RAW_INTERRUPT_VBLANK(x) ((x) << 2) +#define YHGCH_RAW_INTERRUPT_VBLANK_MASK 0x4 + +#define YHGCH_RAW_INTERRUPT_EN 0x80298 +#define YHGCH_RAW_INTERRUPT_EN_VBLANK(x) ((x) << 2) +#define YHGCH_RAW_INTERRUPT_EN_VBLANK_MASK 0x4 + +/* register and values for PLL control */ +#define CRT_PLL1_NS 0x802a8 +#define CRT_PLL1_NS_OUTER_BYPASS(x) ((x) << 30) +#define CRT_PLL1_NS_INTER_BYPASS(x) ((x) << 29) +#define CRT_PLL1_NS_POWERON(x) ((x) << 24) + +#define CRT_PLL1_NS_25MHZ 0x00006691 //640x480 +#define CRT_PLL1_NS_40MHZ 0x00004580 //800x600 +#define CRT_PLL1_NS_65MHZ 0x00002568 //1024x768 +#define CRT_PLL1_NS_83MHZ 0x000027bb //1280x800 +#define CRT_PLL1_NS_106MHZ 0x000027ef //1440x900 +#define CRT_PLL1_NS_108MHZ 0x000027f2 //1280x1024 +#define CRT_PLL1_NS_146MHZ 0x00001575 //1680x1050 +#define CRT_PLL1_NS_148MHZ 0x0000145f //1920x1080 +#define CRT_PLL1_NS_193MHZ 0x000018f7 //1920x1200 + +#define CRT_PLL2_NS 0x802ac +#define CRT_PLL2_NS_25MHZ 0x0 +#define CRT_PLL2_NS_40MHZ 0x0 +#define CRT_PLL2_NS_65MHZ 0x0 +#define CRT_PLL2_NS_83MHZ 0x0 +#define CRT_PLL2_NS_106MHZ 0x0 +#define CRT_PLL2_NS_108MHZ 0x0 +#define CRT_PLL2_NS_146MHZ 0x0 +#define CRT_PLL2_NS_148MHZ 0x0 +#define CRT_PLL2_NS_193MHZ 0x0 + +#define YHGCH_FIELD(field, value) (field(value) & field##_MASK) +#endif diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_vdac.c b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_vdac.c new file mode 100644 index 000000000000..5a22b8ed007f --- /dev/null +++ b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_vdac.c @@ -0,0 +1,116 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <linux/io.h> + +#include <drm/drm_atomic_helper.h> +#include <drm/drm_edid.h> +#include <drm/drm_probe_helper.h> +#include <drm/drm_print.h> +#include <drm/drm_simple_kms_helper.h> + +#include "yhgch_drm_drv.h" +#include "yhgch_drm_regs.h" + +static int yhgch_connector_get_modes(struct drm_connector *connector) +{ + int count; + void *edid; + struct yhgch_connector *yhgch_connector = to_yhgch_connector(connector); + + edid = drm_get_edid(connector, &yhgch_connector->adapter); + if (edid) { + drm_connector_update_edid_property(connector, edid); + count = drm_add_edid_modes(connector, edid); + if (count) + goto out; + } + + count = drm_add_modes_noedid(connector, + connector->dev->mode_config.max_width, + connector->dev->mode_config.max_height); + drm_set_preferred_mode(connector, 1024, 768); + +out: + kfree(edid); + return count; +} + +static void yhgch_connector_destroy(struct drm_connector *connector) +{ + struct yhgch_connector *yhgch_connector = to_yhgch_connector(connector); + + i2c_del_adapter(&yhgch_connector->adapter); + drm_connector_cleanup(connector); +} + +static const struct drm_connector_helper_funcs + yhgch_connector_helper_funcs = { + .get_modes = yhgch_connector_get_modes, +}; + +static const struct drm_connector_funcs yhgch_connector_funcs = { + .fill_modes = drm_helper_probe_single_connector_modes, + .destroy = yhgch_connector_destroy, + .reset = drm_atomic_helper_connector_reset, + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, +}; + +static void yhgch_encoder_mode_set(struct drm_encoder *encoder, + struct drm_display_mode *mode, + struct drm_display_mode *adj_mode) +{ + u32 reg; + struct drm_device *dev = encoder->dev; + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); + + reg = readl(priv->mmio + YHGCH_DISPLAY_CONTROL_HISILE); + reg |= YHGCH_DISPLAY_CONTROL_FPVDDEN(1); + reg |= YHGCH_DISPLAY_CONTROL_PANELDATE(1); + reg |= YHGCH_DISPLAY_CONTROL_FPEN(1); + reg |= YHGCH_DISPLAY_CONTROL_VBIASEN(1); + writel(reg, priv->mmio + YHGCH_DISPLAY_CONTROL_HISILE); +} + +static const struct drm_encoder_helper_funcs yhgch_encoder_helper_funcs = { + .mode_set = yhgch_encoder_mode_set, +}; + +int yhgch_vdac_init(struct yhgch_drm_private *priv) +{ + struct drm_device *dev = &priv->dev; + struct yhgch_connector *yhgch_connector = &priv->connector; + struct drm_encoder *encoder = &priv->encoder; + struct drm_crtc *crtc = &priv->crtc; + struct drm_connector *connector = &yhgch_connector->base; + int ret; + + ret = yhgch_ddc_create(dev, yhgch_connector); + if (ret) { + drm_err(dev, "failed to create ddc: %d\n", ret); + return ret; + } + + encoder->possible_crtcs = drm_crtc_mask(crtc); + ret = drm_simple_encoder_init(dev, encoder, DRM_MODE_ENCODER_DAC); + if (ret) { + drm_err(dev, "failed to init encoder: %d\n", ret); + return ret; + } + + drm_encoder_helper_add(encoder, &yhgch_encoder_helper_funcs); + + ret = drm_connector_init_with_ddc(dev, connector, + &yhgch_connector_funcs, + DRM_MODE_CONNECTOR_VGA, + &yhgch_connector->adapter); + if (ret) { + drm_err(dev, "failed to init connector: %d\n", ret); + return ret; + } + drm_connector_helper_add(connector, &yhgch_connector_helper_funcs); + + drm_connector_attach_encoder(connector, encoder); + + return 0; +} -- 2.43.5 ^ permalink raw reply related [flat|nested] 22+ messages in thread
* Re: [PATCH 1/1] [DRIVER] gpu: drm: add support for Yhgc ZX1000 soc chipset 2025-08-08 5:35 ` [PATCH 1/1] [DRIVER] gpu: drm: add support for Yhgc ZX1000 soc chipset chuguangqing @ 2025-08-27 9:17 ` Thomas Zimmermann 2025-09-03 5:45 ` [PATCH v2 0/1] " chuguangqing 0 siblings, 1 reply; 22+ messages in thread From: Thomas Zimmermann @ 2025-08-27 9:17 UTC (permalink / raw) To: chuguangqing, maarten.lankhorst, mripard, airlied, simona Cc: linux-kernel, dri-devel Hi, apologies for the late review. Comments can be found below. Am 08.08.25 um 07:35 schrieb chuguangqing: > add support for Yhgc BMC soc chipset > > Signed-off-by: chuguangqing <chuguangqing@inspur.com> > --- > MAINTAINERS | 5 + > drivers/gpu/drm/Kconfig | 2 + > drivers/gpu/drm/Makefile | 1 + > drivers/gpu/drm/yhgch/Kconfig | 5 + > drivers/gpu/drm/yhgch/Makefile | 4 + > drivers/gpu/drm/yhgch/yhgch-drm/Kconfig | 12 + > drivers/gpu/drm/yhgch/yhgch-drm/Makefile | 20 + > .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_de.c | 458 ++++++++++++++++++ > .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.c | 374 ++++++++++++++ > .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.h | 53 ++ > .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_i2c.c | 89 ++++ > .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_regs.h | 209 ++++++++ > .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_vdac.c | 116 +++++ > 13 files changed, 1348 insertions(+) > create mode 100644 drivers/gpu/drm/yhgch/Kconfig > create mode 100644 drivers/gpu/drm/yhgch/Makefile > create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/Kconfig > create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/Makefile > create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_de.c > create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.c > create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.h > create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_i2c.c > create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_regs.h > create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_vdac.c > > diff --git a/MAINTAINERS b/MAINTAINERS > index 10614ca41ed0..c79d9361fa81 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -27744,6 +27744,11 @@ S: Maintained > F: Documentation/input/devices/yealink.rst > F: drivers/input/misc/yealink.* > > +YHGC DRM DRIVER > +M: chuguangqing <chuguangqing@inspur.com> > +S: Maintained > +F: drivers/gpu/drm/yhgch > + > Z8530 DRIVER FOR AX.25 > M: Joerg Reuter <jreuter@yaina.de> > L: linux-hams@vger.kernel.org > diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig > index f7ea8e895c0c..8e0b1d12c81f 100644 > --- a/drivers/gpu/drm/Kconfig > +++ b/drivers/gpu/drm/Kconfig > @@ -396,6 +396,8 @@ source "drivers/gpu/drm/sprd/Kconfig" > > source "drivers/gpu/drm/imagination/Kconfig" > > +source "drivers/gpu/drm/yhgch/Kconfig" > + > config DRM_HYPERV > tristate "DRM Support for Hyper-V synthetic video device" > depends on DRM && PCI && HYPERV > diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile > index 4dafbdc8f86a..f344e0173b29 100644 > --- a/drivers/gpu/drm/Makefile > +++ b/drivers/gpu/drm/Makefile > @@ -231,6 +231,7 @@ obj-y += solomon/ > obj-$(CONFIG_DRM_SPRD) += sprd/ > obj-$(CONFIG_DRM_LOONGSON) += loongson/ > obj-$(CONFIG_DRM_POWERVR) += imagination/ > +obj-$(CONFIG_DRM_YHGCH) += yhgch/ > > # Ensure drm headers are self-contained and pass kernel-doc > hdrtest-files := \ > diff --git a/drivers/gpu/drm/yhgch/Kconfig b/drivers/gpu/drm/yhgch/Kconfig > new file mode 100644 > index 000000000000..ae9bb3974d04 > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/Kconfig > @@ -0,0 +1,5 @@ > +# License: GPL-2.0 > +# > +# yhgch drm device configuration. > + Please drop this comment. The file's purpose is obvious. > +source "drivers/gpu/drm/yhgch/yhgch-drm/Kconfig" > diff --git a/drivers/gpu/drm/yhgch/Makefile b/drivers/gpu/drm/yhgch/Makefile > new file mode 100644 > index 000000000000..7ed11b275d55 > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/Makefile > @@ -0,0 +1,4 @@ > +# > +# Makefile for yhgch drm drivers. > + Same with this comment. The file's purpose is obvious. > +obj-$(CONFIG_DRM_YHGCH) += yhgch-drm/ > diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/Kconfig b/drivers/gpu/drm/yhgch/yhgch-drm/Kconfig > new file mode 100644 > index 000000000000..10d586bbe897 > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/yhgch-drm/Kconfig > @@ -0,0 +1,12 @@ > +config DRM_YHGCH > + tristate "DRM Support for Yhgch BMC" > + depends on DRM && PCI && MMU > + select DRM_CLIENT_SELECTION > + select DRM_KMS_HELPER > + select DRM_VRAM_HELPER > + select DRM_TTM_HELPER > + help > + Choose this option if you have a Yhgch soc chipset. > + If M is selected the module will be called yhgch - drm. > + IF Y is selected the module will be built into the kernel. > + IF N is selected the module will be excluded from the kernel. > diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/Makefile b/drivers/gpu/drm/yhgch/yhgch-drm/Makefile > new file mode 100644 > index 000000000000..4e2332b1843b > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/yhgch-drm/Makefile > @@ -0,0 +1,20 @@ > +ifneq ($(KERNELRELEASE),) > + > +yhgch-drm-y := yhgch_drm_drv.o yhgch_drm_de.o yhgch_drm_vdac.o yhgch_drm_i2c.o > + > +#obj-$(CONFIG_DRM_YHGCH) += yhgch-drm.o > +obj-m += yhgch-drm.o > + > + > +else > +knv := $(shell uname -r) > +KERNELDIR := /lib/modules/$(knv)/build > +PWD := $(shell pwd) > + > +default: > + $(MAKE) -C $(KERNELDIR) M=$(PWD) modules > +install: > + $(MAKE) -C $(KERNELDIR) M=$(PWD) modules_install > +clean: > + $(MAKE) -C $(KERNELDIR) M=$(PWD) clean > +endif What's the purpose of this else branch? > diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_de.c b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_de.c > new file mode 100644 > index 000000000000..aa81afd91b02 > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_de.c > @@ -0,0 +1,458 @@ > +// SPDX-License-Identifier: GPL-2.0-or-later > + > +#include <linux/delay.h> > +#include <drm/drm_atomic.h> > +#include <drm/drm_atomic_helper.h> > +#include <drm/drm_fourcc.h> > + > +#include <drm/drm_gem_vram_helper.h> > +#include <drm/drm_vblank.h> > + > +#include "yhgch_drm_drv.h" > +#include "yhgch_drm_regs.h" > + > +struct yhgch_dislay_pll_config { > + u64 hdisplay; > + u64 vdisplay; > + u32 pll1_config_value; > + u32 pll2_config_value; > +}; > + > +static const struct yhgch_dislay_pll_config yhgch_pll_table[] = { > + { 640, 480, CRT_PLL1_NS_25MHZ, CRT_PLL2_NS_25MHZ }, > + { 800, 600, CRT_PLL1_NS_40MHZ, CRT_PLL2_NS_40MHZ }, > + { 1024, 768, CRT_PLL1_NS_65MHZ, CRT_PLL2_NS_65MHZ }, > + { 1280, 1024, CRT_PLL1_NS_108MHZ, CRT_PLL2_NS_108MHZ }, > + { 1920, 1080, CRT_PLL1_NS_148MHZ, CRT_PLL2_NS_148MHZ }, > +}; > + > +static inline unsigned long PADDING(unsigned long align, unsigned long data) > +{ > + return (((data) + (align) - 1) & (~((align) - 1))); > +} > + > +static int yhgch_plane_atomic_check(struct drm_plane *plane, > + struct drm_atomic_state *state) > +{ > + struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state, > + plane); > + struct drm_framebuffer *fb = new_plane_state->fb; > + struct drm_crtc *crtc = new_plane_state->crtc; > + struct drm_crtc_state *crtc_state; > + u32 src_w = new_plane_state->src_w >> 16; > + u32 src_h = new_plane_state->src_h >> 16; > + > + if (!crtc || !fb) > + return 0; > + > + crtc_state = drm_atomic_get_crtc_state(state, crtc); > + if (IS_ERR(crtc_state)) > + return PTR_ERR(crtc_state); > + > + if (src_w != new_plane_state->crtc_w || src_h != new_plane_state->crtc_h) { > + drm_dbg_atomic(plane->dev, "scale not support\n"); > + return -EINVAL; > + } > + > + if (new_plane_state->crtc_x < 0 || new_plane_state->crtc_y < 0) { > + drm_dbg_atomic(plane->dev, "crtc_x/y of drm_plane state is invalid\n"); > + return -EINVAL; > + } > + > + if (!crtc_state->enable) > + return 0; > + > + if (new_plane_state->crtc_x + new_plane_state->crtc_w > > + crtc_state->adjusted_mode.hdisplay || > + new_plane_state->crtc_y + new_plane_state->crtc_h > > + crtc_state->adjusted_mode.vdisplay) { > + drm_dbg_atomic(plane->dev, "visible portion of plane is invalid\n"); > + return -EINVAL; > + } Please replace this block with a call to drm_atomic_helper_check_plane_state(). You can duplicate the code ast_mode.c, lines 504 to 518. [1] [1] https://elixir.bootlin.com/linux/v6.16.3/source/drivers/gpu/drm/ast/ast_mode.c#L504 That will handle the basic plane-state checks and updates. Either it returns on disabled planes, or you'll have a valid plane that is enabled. > + > + if (new_plane_state->fb->pitches[0] % 16 != 0) { > + drm_dbg_atomic(plane->dev, "wrong stride with 16-byte aligned\n"); > + return -EINVAL; > + } > + return 0; > +} > + > +static void yhgch_plane_atomic_update(struct drm_plane *plane, > + struct drm_atomic_state *state) > +{ > + struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state, > + plane); > + u32 reg; > + s64 gpu_addr = 0; > + u32 line_l; > + struct yhgch_drm_private *priv = to_yhgch_drm_private(plane->dev); > + struct drm_gem_vram_object *gbo; In another review, I mentioned that VRAM helpers are deprecated and on their way out. For simple chipsets, gem-shmem is recommended. If your chipset has full 3d acceleration, directly using TTM is advised. But 3d rendering will also require Mesa drivers and additional code in the DRM driver. > + > + if (!new_state->fb) > + return; > + > + gbo = drm_gem_vram_of_gem(new_state->fb->obj[0]); > + > + gpu_addr = drm_gem_vram_offset(gbo); > + if (gpu_addr < 0) > + return; > + > + writel(gpu_addr, priv->mmio + YHGCH_CRT_FB_ADDRESS); > + > + reg = new_state->fb->width * (new_state->fb->format->cpp[0]); > + > + line_l = new_state->fb->pitches[0]; > + writel(YHGCH_FIELD(YHGCH_CRT_FB_WIDTH_WIDTH, reg) | > + YHGCH_FIELD(YHGCH_CRT_FB_WIDTH_OFFS, line_l), > + priv->mmio + YHGCH_CRT_FB_WIDTH); > + > + /* SET PIXEL FORMAT */ > + reg = readl(priv->mmio + YHGCH_CRT_DISP_CTL); > + reg &= ~YHGCH_CRT_DISP_CTL_FORMAT_MASK; > + reg |= YHGCH_FIELD(YHGCH_CRT_DISP_CTL_FORMAT, > + new_state->fb->format->cpp[0] * 8 / 16); > + writel(reg, priv->mmio + YHGCH_CRT_DISP_CTL); > +} > + > +static const u32 channel_formats1[] = { > + DRM_FORMAT_RGB565, DRM_FORMAT_BGR565, DRM_FORMAT_RGB888, > + DRM_FORMAT_BGR888, DRM_FORMAT_XRGB8888, DRM_FORMAT_XBGR8888, > + DRM_FORMAT_RGBA8888, DRM_FORMAT_BGRA8888, DRM_FORMAT_ARGB8888, > + DRM_FORMAT_ABGR8888 > +}; Does the chipset really support alpha channels on the primary plane? If not, please remove all the alpha formats form this list. I also don't see any code in yhgch_plane_atomic_update() that handles the differences in pixel formats. I'd expect code that tells the chipset whether it's rgb or bgr. > + > +static struct drm_plane_funcs yhgch_plane_funcs = { > + .update_plane = drm_atomic_helper_update_plane, > + .disable_plane = drm_atomic_helper_disable_plane, > + .destroy = drm_plane_cleanup, > + .reset = drm_atomic_helper_plane_reset, > + .atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state, > + .atomic_destroy_state = drm_atomic_helper_plane_destroy_state, > +}; > + > +static const struct drm_plane_helper_funcs yhgch_plane_helper_funcs = { > + DRM_GEM_VRAM_PLANE_HELPER_FUNCS, > + .atomic_check = yhgch_plane_atomic_check, > + .atomic_update = yhgch_plane_atomic_update, > +}; > + > +static void yhgch_crtc_dpms(struct drm_crtc *crtc, u32 dpms) > +{ > + struct yhgch_drm_private *priv = to_yhgch_drm_private(crtc->dev); > + u32 reg; > + > + reg = readl(priv->mmio + YHGCH_CRT_DISP_CTL); > + reg &= ~YHGCH_CRT_DISP_CTL_DPMS_MASK; > + reg |= YHGCH_FIELD(YHGCH_CRT_DISP_CTL_DPMS, dpms); > + reg &= ~YHGCH_CRT_DISP_CTL_TIMING_MASK; > + if (dpms == YHGCH_CRT_DPMS_ON) > + reg |= YHGCH_CRT_DISP_CTL_TIMING(1); > + writel(reg, priv->mmio + YHGCH_CRT_DISP_CTL); > +} > + > +static void yhgch_crtc_atomic_enable(struct drm_crtc *crtc, > + struct drm_atomic_state *old_state) > +{ > + u32 reg; > + struct yhgch_drm_private *priv = to_yhgch_drm_private(crtc->dev); > + > + yhgch_set_power_mode(priv, YHGCH_PW_MODE_CTL_MODE_MODE0); > + > + /* Enable display power gate & LOCALMEM power gate */ > + reg = readl(priv->mmio + YHGCH_CURRENT_GATE); > + reg &= ~YHGCH_CURR_GATE_LOCALMEM_MASK; > + reg &= ~YHGCH_CURR_GATE_DISPLAY_MASK; > + reg |= YHGCH_CURR_GATE_LOCALMEM(1); > + reg |= YHGCH_CURR_GATE_DISPLAY(1); > + yhgch_set_current_gate(priv, reg); > + yhgch_crtc_dpms(crtc, YHGCH_CRT_DPMS_ON); > +} > + > +static void yhgch_crtc_atomic_disable(struct drm_crtc *crtc, > + struct drm_atomic_state *old_state) > +{ > + u32 reg; > + struct yhgch_drm_private *priv = to_yhgch_drm_private(crtc->dev); > + > + yhgch_crtc_dpms(crtc, YHGCH_CRT_DPMS_OFF); > + > + yhgch_set_power_mode(priv, YHGCH_PW_MODE_CTL_MODE_SLEEP); > + > + /* Enable display power gate & LOCALMEM power gate */ > + reg = readl(priv->mmio + YHGCH_CURRENT_GATE); > + reg &= ~YHGCH_CURR_GATE_LOCALMEM_MASK; > + reg &= ~YHGCH_CURR_GATE_DISPLAY_MASK; > + reg |= YHGCH_CURR_GATE_LOCALMEM(0); > + reg |= YHGCH_CURR_GATE_DISPLAY(0); > + yhgch_set_current_gate(priv, reg); > +} > + > +static enum drm_mode_status > +yhgch_crtc_mode_valid(struct drm_crtc *crtc, > + const struct drm_display_mode *mode) > +{ > + size_t i = 0; > + int vrefresh = drm_mode_vrefresh(mode); > + > + if (vrefresh < 59 || vrefresh > 61) > + return MODE_NOCLOCK; > + > + for (i = 0; i < ARRAY_SIZE(yhgch_pll_table); i++) { > + if (yhgch_pll_table[i].hdisplay == mode->hdisplay && > + yhgch_pll_table[i].vdisplay == mode->vdisplay) > + return MODE_OK; > + } > + > + return MODE_BAD; > +} > + > +static void set_vclock_yhgch(struct drm_device *dev, u64 pll) > +{ > + u32 val; > + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); > + > + val = readl(priv->mmio + CRT_PLL1_NS); > + val &= ~(CRT_PLL1_NS_OUTER_BYPASS(1)); > + writel(val, priv->mmio + CRT_PLL1_NS); > + > + val = CRT_PLL1_NS_INTER_BYPASS(1) | CRT_PLL1_NS_POWERON(1); > + writel(val, priv->mmio + CRT_PLL1_NS); > + > + writel(pll, priv->mmio + CRT_PLL1_NS); > + > + usleep_range(1000, 2000); > + > + val = pll & ~(CRT_PLL1_NS_POWERON(1)); > + writel(val, priv->mmio + CRT_PLL1_NS); > + > + usleep_range(1000, 2000); > + > + val &= ~(CRT_PLL1_NS_INTER_BYPASS(1)); > + writel(val, priv->mmio + CRT_PLL1_NS); > + > + usleep_range(1000, 2000); > + > + val |= CRT_PLL1_NS_OUTER_BYPASS(1); > + writel(val, priv->mmio + CRT_PLL1_NS); > +} > + > +static void get_pll_config(u64 x, u64 y, u32 *pll1, u32 *pll2) > +{ > + size_t i; > + size_t count = ARRAY_SIZE(yhgch_pll_table); > + > + for (i = 0; i < count; i++) { > + if (yhgch_pll_table[i].hdisplay == x && > + yhgch_pll_table[i].vdisplay == y) { > + *pll1 = yhgch_pll_table[i].pll1_config_value; > + *pll2 = yhgch_pll_table[i].pll2_config_value; > + return; > + } > + } > + > + /* if found none, we use default value */ > + *pll1 = CRT_PLL1_NS_25MHZ; > + *pll2 = CRT_PLL2_NS_25MHZ; > +} > + > +/* > + * This function takes care the extra registers and bit fields required to > + * setup a mode in board. > + * Explanation about Display Control register: > + * FPGA only supports 7 predefined pixel clocks, and clock select is > + * in bit 4:0 of new register 0x802a8. > + */ > +static u32 display_ctrl_adjust(struct drm_device *dev, > + struct drm_display_mode *mode, > + u32 ctrl) > +{ > + u64 x, y; Rather w, h ? > + u32 pll1; /* bit[31:0] of PLL */ > + u32 pll2; /* bit[63:32] of PLL */ > + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); > + > + x = mode->hdisplay; > + y = mode->vdisplay; > + > + get_pll_config(x, y, &pll1, &pll2); > + writel(pll2, priv->mmio + CRT_PLL2_NS); > + set_vclock_yhgch(dev, pll1); > + > + /* > + * yhgch has to set up the top-left and bottom-right > + * registers as well. > + * Note that normal chip only use those two register for > + * auto-centering mode. > + */ > + writel(YHGCH_FIELD(YHGCH_CRT_AUTO_CENTERING_TL_TOP, 0) | > + YHGCH_FIELD(YHGCH_CRT_AUTO_CENTERING_TL_LEFT, 0), > + priv->mmio + YHGCH_CRT_AUTO_CENTERING_TL); > + > + writel(YHGCH_FIELD(YHGCH_CRT_AUTO_CENTERING_BR_BOTTOM, y - 1) | > + YHGCH_FIELD(YHGCH_CRT_AUTO_CENTERING_BR_RIGHT, x - 1), > + priv->mmio + YHGCH_CRT_AUTO_CENTERING_BR); What does this code do? The comment makes it sounds as if it places the primary plane within the screen? > + > + /* > + * Assume common fields in ctrl have been properly set before > + * calling this function. > + * This function only sets the extra fields in ctrl. > + */ > + > + /* Set bit 25 of display controller: Select CRT or VGA clock */ > + ctrl &= ~YHGCH_CRT_DISP_CTL_CRTSELECT_MASK; > + ctrl &= ~YHGCH_CRT_DISP_CTL_CLOCK_PHASE_MASK; > + > + ctrl |= YHGCH_CRT_DISP_CTL_CRTSELECT(YHGCH_CRTSELECT_CRT); > + > + /* clock_phase_polarity is 0 */ > + ctrl |= YHGCH_CRT_DISP_CTL_CLOCK_PHASE(0); > + ctrl |= YHGCH_FIELD(YHGCH_CRT_DISP_CTL_FORMAT, 2); > + > + writel(ctrl, priv->mmio + YHGCH_CRT_DISP_CTL); > + > + return ctrl; > +} > + > +static void yhgch_crtc_mode_set_nofb(struct drm_crtc *crtc) > +{ > + u32 val; > + struct drm_display_mode *mode = &crtc->state->mode; > + struct drm_device *dev = crtc->dev; > + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); > + u32 width = mode->hsync_end - mode->hsync_start; > + u32 height = mode->vsync_end - mode->vsync_start; > + > + //writel(format_pll_reg(), priv->mmio + YHGCH_CRT_PLL_CTRL); > + writel(YHGCH_FIELD(YHGCH_CRT_HORZ_TOTAL_TOTAL, mode->htotal - 1) | > + YHGCH_FIELD(YHGCH_CRT_HORZ_TOTAL_DISP_END, mode->hdisplay - 1), > + priv->mmio + YHGCH_CRT_HORZ_TOTAL); > + > + writel(YHGCH_FIELD(YHGCH_CRT_HORZ_SYNC_WIDTH, width) | > + YHGCH_FIELD(YHGCH_CRT_HORZ_SYNC_START, mode->hsync_start - 1), > + priv->mmio + YHGCH_CRT_HORZ_SYNC); > + > + writel(YHGCH_FIELD(YHGCH_CRT_VERT_TOTAL_TOTAL, mode->vtotal - 1) | > + YHGCH_FIELD(YHGCH_CRT_VERT_TOTAL_DISP_END, mode->vdisplay - 1), > + priv->mmio + YHGCH_CRT_VERT_TOTAL); > + > + writel(YHGCH_FIELD(YHGCH_CRT_VERT_SYNC_HEIGHT, height) | > + YHGCH_FIELD(YHGCH_CRT_VERT_SYNC_START, mode->vsync_start - 1), > + priv->mmio + YHGCH_CRT_VERT_SYNC); > + > + val = YHGCH_FIELD(YHGCH_CRT_DISP_CTL_VSYNC_PHASE, 0); > + val |= YHGCH_FIELD(YHGCH_CRT_DISP_CTL_HSYNC_PHASE, 0); > + val |= YHGCH_CRT_DISP_CTL_TIMING(1); > + val |= YHGCH_CRT_DISP_CTL_PLANE(1); > + > + display_ctrl_adjust(dev, mode, val); > +} > + > +static void yhgch_crtc_atomic_begin(struct drm_crtc *crtc, > + struct drm_atomic_state *old_state) > +{ > + u32 reg; > + struct drm_device *dev = crtc->dev; > + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); > + > + yhgch_set_power_mode(priv, YHGCH_PW_MODE_CTL_MODE_MODE0); > + > + /* Enable display power gate & LOCALMEM power gate */ > + reg = readl(priv->mmio + YHGCH_CURRENT_GATE); > + reg &= ~YHGCH_CURR_GATE_DISPLAY_MASK; > + reg &= ~YHGCH_CURR_GATE_LOCALMEM_MASK; > + reg |= YHGCH_CURR_GATE_DISPLAY(1); > + reg |= YHGCH_CURR_GATE_LOCALMEM(1); > + yhgch_set_current_gate(priv, reg); > + > + /* We can add more initialization as needed. */ > +} > + > +static void yhgch_crtc_atomic_flush(struct drm_crtc *crtc, > + struct drm_atomic_state *state) > + > +{ > + unsigned long flags; > + > + spin_lock_irqsave(&crtc->dev->event_lock, flags); > + if (crtc->state->event) > + drm_crtc_send_vblank_event(crtc, crtc->state->event); > + crtc->state->event = NULL; > + spin_unlock_irqrestore(&crtc->dev->event_lock, flags); > +} > + > +static int yhgch_crtc_enable_vblank(struct drm_crtc *crtc) > +{ > + struct yhgch_drm_private *priv = to_yhgch_drm_private(crtc->dev); > + > + writel(YHGCH_RAW_INTERRUPT_EN_VBLANK(1), > + priv->mmio + YHGCH_RAW_INTERRUPT_EN); > + > + return 0; > +} > + > +static void yhgch_crtc_disable_vblank(struct drm_crtc *crtc) > +{ > + struct yhgch_drm_private *priv = to_yhgch_drm_private(crtc->dev); > + > + writel(YHGCH_RAW_INTERRUPT_EN_VBLANK(0), > + priv->mmio + YHGCH_RAW_INTERRUPT_EN); > +} > + > +static const struct drm_crtc_funcs yhgch_crtc_funcs = { > + .page_flip = drm_atomic_helper_page_flip, > + .set_config = drm_atomic_helper_set_config, > + .destroy = drm_crtc_cleanup, > + .reset = drm_atomic_helper_crtc_reset, > + .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state, > + .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state, > + .enable_vblank = yhgch_crtc_enable_vblank, > + .disable_vblank = yhgch_crtc_disable_vblank, > + > +}; > + > +static const struct drm_crtc_helper_funcs yhgch_crtc_helper_funcs = { > + .mode_set_nofb = yhgch_crtc_mode_set_nofb, > + .atomic_begin = yhgch_crtc_atomic_begin, > + .atomic_flush = yhgch_crtc_atomic_flush, > + .atomic_enable = yhgch_crtc_atomic_enable, > + .atomic_disable = yhgch_crtc_atomic_disable, > + .mode_valid = yhgch_crtc_mode_valid, > +}; > + > +int yhgch_de_init(struct yhgch_drm_private *priv) > +{ > + struct drm_device *dev = &priv->dev; > + struct drm_crtc *crtc = &priv->crtc; > + struct drm_plane *plane = &priv->primary_plane; > + int ret; > + > + ret = drm_universal_plane_init(dev, plane, 1, &yhgch_plane_funcs, > + channel_formats1, > + ARRAY_SIZE(channel_formats1), > + NULL, > + DRM_PLANE_TYPE_PRIMARY, > + NULL); > + > + if (ret) { > + drm_err(dev, "failed to init plane: %d\n", ret); > + return ret; > + } > + > + drm_plane_helper_add(plane, &yhgch_plane_helper_funcs); > + > + ret = drm_crtc_init_with_planes(dev, crtc, plane, > + NULL, &yhgch_crtc_funcs, NULL); > + if (ret) { > + drm_err(dev, "failed to init crtc: %d\n", ret); > + return ret; > + } > + > + ret = drm_mode_crtc_set_gamma_size(crtc, 256); > + if (ret) { > + drm_err(dev, "failed to set gamma size: %d\n", ret); > + return ret; > + } > + drm_crtc_helper_add(crtc, &yhgch_crtc_helper_funcs); > + > + return 0; > +} > diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.c b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.c > new file mode 100644 > index 000000000000..382609bbf08e > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.c > @@ -0,0 +1,374 @@ > +// SPDX-License-Identifier: GPL-2.0 > + > +#include "yhgch_drm_drv.h" > + > +#include <linux/module.h> > +#include <linux/pci.h> > + > +#include <linux/aperture.h> > +#include <drm/clients/drm_client_setup.h> > + > +#include <drm/drm_atomic_helper.h> > +#include <drm/drm_drv.h> > +#include <drm/drm_fbdev_ttm.h> > + > +#include <drm/drm_gem_framebuffer_helper.h> > +#include <drm/drm_gem_vram_helper.h> > +#include <drm/drm_managed.h> > +#include <drm/drm_module.h> > +#include <drm/drm_vblank.h> > + > +#include "yhgch_drm_drv.h" > +#include "yhgch_drm_regs.h" > + > +#define MEM_SIZE_RESERVE4KVM 0x200000 > + > +DEFINE_DRM_GEM_FOPS(yhgch_fops); > +static irqreturn_t yhgch_drm_interrupt(int irq, void *arg) > +{ > + struct drm_device *dev = (struct drm_device *)arg; > + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); > + u32 status; > + > + status = readl(priv->mmio + YHGCH_RAW_INTERRUPT); > + > + if (status & YHGCH_RAW_INTERRUPT_VBLANK(1)) { > + writel(YHGCH_RAW_INTERRUPT_VBLANK(1), > + priv->mmio + YHGCH_RAW_INTERRUPT); > + drm_handle_vblank(dev, 0); > + } > + > + return IRQ_HANDLED; > +} > + > +int yhgch_dumb_create(struct drm_file *file, struct drm_device *dev, > + struct drm_mode_create_dumb *args) > +{ > + return drm_gem_vram_fill_create_dumb(file, dev, 0, 16, args); > +} > + > +static struct drm_driver yhgch_driver = { > + .driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC, > + .fops = &yhgch_fops, > + .name = "yhgch", > + .desc = "yhgch drm driver", > + .major = 3, > + .minor = 1, > + .debugfs_init = drm_vram_mm_debugfs_init, > + .dumb_create = yhgch_dumb_create, > + .dumb_map_offset = drm_gem_ttm_dumb_map_offset, > + DRM_FBDEV_TTM_DRIVER_OPS, > +}; > + > +static int __maybe_unused yhgch_pm_suspend(struct device *dev) > +{ > + struct drm_device *drm_dev = dev_get_drvdata(dev); > + > + return drm_mode_config_helper_suspend(drm_dev); > +} > + > +static int __maybe_unused yhgch_pm_resume(struct device *dev) > +{ > + struct drm_device *drm_dev = dev_get_drvdata(dev); > + > + return drm_mode_config_helper_resume(drm_dev); > +} > + > +static const struct dev_pm_ops yhgch_pm_ops = { > + SET_SYSTEM_SLEEP_PM_OPS(yhgch_pm_suspend, > + yhgch_pm_resume) > +}; > + > +static const struct drm_mode_config_funcs yhgch_mode_funcs = { > + .mode_valid = drm_vram_helper_mode_valid, > + .atomic_check = drm_atomic_helper_check, > + .atomic_commit = drm_atomic_helper_commit, > + .fb_create = drm_gem_fb_create, > +}; > + > +static int yhgch_kms_init(struct yhgch_drm_private *priv) > +{ > + struct drm_device *dev = &priv->dev; > + int ret; > + > + ret = drmm_mode_config_init(dev); > + if (ret) > + return ret; > + > + priv->dev.mode_config.min_width = 0; > + priv->dev.mode_config.min_height = 0; > + priv->dev.mode_config.max_width = 1920; > + priv->dev.mode_config.max_height = 1200; > + dev->mode_config.preferred_depth = 24; > + priv->dev.mode_config.prefer_shadow = 1; > + priv->dev.mode_config.funcs = (void *)&yhgch_mode_funcs; No type casting here, please. > + > + ret = yhgch_de_init(priv); > + if (ret) { > + drm_err(dev, "failed to init de: %d\n", ret); > + return ret; > + } > + > + ret = yhgch_vdac_init(priv); > + if (ret) { > + drm_err(dev, "failed to init vdac: %d\n", ret); > + return ret; > + } > + > + return 0; > +} > + > +/* > + * It can operate in one of three modes: 0, 1 or Sleep. > + */ > +void yhgch_set_power_mode(struct yhgch_drm_private *priv, u32 power_mode) > +{ > + unsigned int control_value = 0; > + void __iomem *mmio = priv->mmio; > + u32 input = 1; > + > + if (power_mode > YHGCH_PW_MODE_CTL_MODE_SLEEP) > + return; > + > + if (power_mode == YHGCH_PW_MODE_CTL_MODE_SLEEP) > + input = 0; > + > + control_value = readl(mmio + YHGCH_POWER_MODE_CTRL); > + control_value &= ~(YHGCH_PW_MODE_CTL_MODE_MASK | > + YHGCH_PW_MODE_CTL_OSC_INPUT_MASK); > + control_value |= YHGCH_FIELD(YHGCH_PW_MODE_CTL_MODE, power_mode); > + control_value |= YHGCH_FIELD(YHGCH_PW_MODE_CTL_OSC_INPUT, input); > + writel(control_value, mmio + YHGCH_POWER_MODE_CTRL); > +} > + > +void yhgch_set_current_gate(struct yhgch_drm_private *priv, unsigned int gate) > +{ > + u32 gate_reg; > + u32 mode; > + void __iomem *mmio = priv->mmio; > + > + /* Get current power mode. */ > + mode = (readl(mmio + YHGCH_POWER_MODE_CTRL) & > + YHGCH_PW_MODE_CTL_MODE_MASK) >> YHGCH_PW_MODE_CTL_MODE_SHIFT; > + > + switch (mode) { > + case YHGCH_PW_MODE_CTL_MODE_MODE0: > + gate_reg = YHGCH_MODE0_GATE; > + break; > + > + case YHGCH_PW_MODE_CTL_MODE_MODE1: > + gate_reg = YHGCH_MODE1_GATE; > + break; > + > + default: > + gate_reg = YHGCH_MODE0_GATE; > + break; > + } > + writel(gate, mmio + gate_reg); > +} > + > +static void yhgch_hw_config(struct yhgch_drm_private *priv) > +{ > + u32 reg; > + > + /* On hardware reset, power mode 0 is default. */ > + yhgch_set_power_mode(priv, YHGCH_PW_MODE_CTL_MODE_MODE0); > + > + /* Enable display power gate & LOCALMEM power gate */ > + reg = readl(priv->mmio + YHGCH_CURRENT_GATE); > + reg &= ~YHGCH_CURR_GATE_DISPLAY_MASK; > + reg &= ~YHGCH_CURR_GATE_LOCALMEM_MASK; > + reg |= YHGCH_CURR_GATE_DISPLAY(1); > + reg |= YHGCH_CURR_GATE_LOCALMEM(1); > + > + yhgch_set_current_gate(priv, reg); > + > + /* > + * Reset the memory controller. If the memory controller > + * is not reset in chip,the system might hang when sw accesses > + * the memory.The memory should be resetted after > + * changing the MXCLK. > + */ > + reg = readl(priv->mmio + YHGCH_MISC_CTRL); > + reg &= ~YHGCH_MSCCTL_LOCALMEM_RESET_MASK; > + reg |= YHGCH_MSCCTL_LOCALMEM_RESET(0); > + writel(reg, priv->mmio + YHGCH_MISC_CTRL); > + > + reg &= ~YHGCH_MSCCTL_LOCALMEM_RESET_MASK; > + reg |= YHGCH_MSCCTL_LOCALMEM_RESET(1); > + > + writel(reg, priv->mmio + YHGCH_MISC_CTRL); > +} > + > +static int yhgch_hw_map(struct yhgch_drm_private *priv) > +{ > + struct drm_device *dev = &priv->dev; > + struct pci_dev *pdev = to_pci_dev(dev->dev); > + resource_size_t ioaddr, iosize; > + > + ioaddr = pci_resource_start(pdev, 1); > + iosize = pci_resource_len(pdev, 1); > + priv->mmio = devm_ioremap(dev->dev, ioaddr, iosize); > + if (!priv->mmio) { > + drm_err(dev, "Cannot map mmio region\n"); > + return -ENOMEM; > + } > + return 0; > +} > + > +static int yhgch_hw_init(struct yhgch_drm_private *priv) > +{ > + int ret; > + > + ret = yhgch_hw_map(priv); > + if (ret) > + return ret; > + yhgch_hw_config(priv); > + return 0; > +} > + > +static int yhgch_unload(struct drm_device *dev) > +{ > + struct pci_dev *pdev = to_pci_dev(dev->dev); > + > + drm_atomic_helper_shutdown(dev); > + > + free_irq(pdev->irq, dev); > + > + pci_disable_msi(to_pci_dev(dev->dev)); By using managed cleanup, these IRQ calls could likely be automated. The unload function could then be removed in favor of a simple call to drm_atomic_helper_shutdown(). > + > + return 0; > +} > + > +static int yhgch_load(struct drm_device *dev) > +{ > + struct pci_dev *pdev = to_pci_dev(dev->dev); > + int ret; > + > + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); I suggest to inline yhgch_load() into its only caller, as it's trivial. If you really want a separate function, please avoid this upcast. You have the priv pointer in the caller, so you can pass it. Increases type safety. Inlining would still be preferred. > + > + ret = yhgch_hw_init(priv); > + if (ret) > + goto err; > + ret = drmm_vram_helper_init(dev, pci_resource_start(pdev, 0), > + pci_resource_len(pdev, 0)); > + if (ret) { > + drm_err(dev, "Error initializing VRAM MM; %d\n", ret); > + goto err; > + } > + ret = yhgch_kms_init(priv); > + if (ret) > + goto err; > + /* > + * ret = drm_vblank_init(dev, dev->mode_config.num_crtc); > + * if (ret) { > + * drm_err(dev, "failed to initialize vblank: %d\n", ret); > + * goto err; > + * } > + */ If you don't use vblanking yet, please remove the respective code (including IRQ) and send it later as a separate patch set. > + ret = pci_enable_msi(pdev); The docs of this helper say that it is deprecated in favor of pci_alloc_irq_vectors(). Please use the new interface instead. > + if (ret) { > + drm_warn(dev, "enabling MSI failed: %d\n", ret); > + } else { > + /* PCI devices require shared interrupts. */ > + ret = request_irq(pdev->irq, yhgch_drm_interrupt, IRQF_SHARED, > + dev->driver->name, dev); Please use devm_request_irq() if possible. > + if (ret) > + drm_warn(dev, "install irq failed: %d\n", ret); > + } > + > + /* reset all the states of crtc/plane/encoder/connector */ > + drm_mode_config_reset(dev); > + return 0; > + > +err: > + yhgch_unload(dev); > + drm_err(dev, "failed to initialize drm driver: %d\n", ret); > + return ret; > +} > + > +static int yhgch_pci_probe(struct pci_dev *pdev, > + const struct pci_device_id *ent) > +{ > + struct yhgch_drm_private *priv; > + struct drm_device *dev; > + int ret; > + > + ret = aperture_remove_conflicting_pci_devices(pdev, yhgch_driver.name); > + > + if (ret) > + return ret; > + > + priv = devm_drm_dev_alloc(&pdev->dev, &yhgch_driver, > + struct yhgch_drm_private, dev); > + > + if (IS_ERR(priv)) { > + DRM_ERROR("failed to allocate drm_device\n"); > + return PTR_ERR(priv); > + } > + > + dev = &priv->dev; > + pci_set_drvdata(pdev, dev); > + > + ret = pcim_enable_device(pdev); > + if (ret) { > + drm_err(dev, "failed to enable pci device: %d\n", ret); > + goto err_return; > + } > + > + ret = yhgch_load(dev); > + if (ret) { > + drm_err(dev, "failed to load yhgch: %d\n", ret); > + goto err_return; > + } > + > + ret = drm_dev_register(dev, 0); > + if (ret) { > + drm_err(dev, "failed to register drv for userspace access: %d\n", > + ret); > + goto err_unload; > + } > + drm_client_setup(dev, NULL); > + > + return 0; > + > +err_unload: > + yhgch_unload(dev); > +err_return: > + return ret; > +} > + > +static void yhgch_pci_remove(struct pci_dev *pdev) > +{ > + struct drm_device *dev = pci_get_drvdata(pdev); > + > + drm_dev_unregister(dev); > + yhgch_unload(dev); > +} > + > +static void yhgch_pci_shutdown(struct pci_dev *pdev) > +{ > + drm_atomic_helper_shutdown(pci_get_drvdata(pdev)); > +} > + > +static struct pci_device_id yhgch_pci_table[] = { > + { 0x1bd4, 0x0750, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, > + { 0, } > +}; > + > +static struct pci_driver yhgch_pci_driver = { > + .name = "yhgch-drm", > + .id_table = yhgch_pci_table, > + .probe = yhgch_pci_probe, > + .remove = yhgch_pci_remove, > + .shutdown = yhgch_pci_shutdown, > + .driver.pm = &yhgch_pm_ops, > +}; > + > +drm_module_pci_driver(yhgch_pci_driver); > + > +MODULE_DEVICE_TABLE(pci, yhgch_pci_table); > +MODULE_AUTHOR(""); > +MODULE_DESCRIPTION("DRM Driver for YhgchBMC"); > +MODULE_LICENSE("GPL"); > +MODULE_VERSION("3.1"); > diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.h b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.h > new file mode 100644 > index 000000000000..a2d0b148d2c2 > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.h > @@ -0,0 +1,53 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > + > +#ifndef YHGCH_DRM_DRV_H > +#define YHGCH_DRM_DRV_H > + > +#include <linux/gpio/consumer.h> > +#include <linux/i2c-algo-bit.h> > +#include <linux/i2c.h> > +#include <linux/version.h> > +#include <drm/drm_framebuffer.h> > +#include <drm/drm_encoder.h> > + > +struct yhgch_connector { > + struct drm_connector base; > + struct i2c_adapter adapter; > + struct i2c_algo_bit_data bit_data; > +}; You likely do not need this type. See [2] for how to setup the DDC channel without an additional connector type. [2] https://elixir.bootlin.com/linux/v6.16.3/source/drivers/gpu/drm/mgag200/mgag200_ddc.c This will allow to contain the whole i2c includes in a single source file. > + > +struct yhgch_drm_private { The common name for such per-device structs would be yhgch_drm_private. The _private postfix comes from a time when DRM drivers looked very different from those today. > + /* hw */ > + void __iomem *mmio; > + > + /* drm */ > + struct drm_device dev; > + struct drm_plane primary_plane; > + struct drm_crtc crtc; > + struct drm_encoder encoder; > + struct yhgch_connector connector; > +}; > + > +static inline struct yhgch_connector *to_yhgch_connector(struct drm_connector *connector) > +{ > + return container_of(connector, struct yhgch_connector, base); > +} > + > +static inline struct yhgch_drm_private *to_yhgch_drm_private(struct drm_device *dev) > +{ > + return container_of(dev, struct yhgch_drm_private, dev); > +} > + > +void yhgch_set_power_mode(struct yhgch_drm_private *priv, u32 power_mode); > +void yhgch_set_current_gate(struct yhgch_drm_private *priv, > + u32 gate); > + > +int yhgch_de_init(struct yhgch_drm_private *priv); > +int yhgch_vdac_init(struct yhgch_drm_private *priv); > +int yhgch_mm_init(struct yhgch_drm_private *yhgch); > +int yhgch_ddc_create(struct drm_device *drm_dev, struct yhgch_connector *connector); > + > +int yhgch_dumb_create(struct drm_file *file, struct drm_device *dev, > + struct drm_mode_create_dumb *args); > + > +#endif > diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_i2c.c b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_i2c.c > new file mode 100644 > index 000000000000..5a826cb2ab46 > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_i2c.c > @@ -0,0 +1,89 @@ > +// SPDX-License-Identifier: GPL-2.0-or-later > + > +#include <linux/delay.h> > +#include <linux/pci.h> > + > +#include <drm/drm_atomic_helper.h> > +#include <drm/drm_probe_helper.h> > + > +#include "yhgch_drm_drv.h" > + > +#define GPIO_DATA 0x0802A0 > +#define GPIO_DATA_DIRECTION 0x0802A4 > + > +#define I2C_SCL_MASK BIT(0) > +#define I2C_SDA_MASK BIT(1) > + > +static void yhgch_set_i2c_signal(void *data, u32 mask, int value) > +{ > + struct yhgch_connector *yhgch_connector = data; > + struct yhgch_drm_private *priv = to_yhgch_drm_private(yhgch_connector->base.dev); > + u32 tmp_dir = readl(priv->mmio + GPIO_DATA_DIRECTION); > + > + if (value) { > + tmp_dir &= ~mask; > + writel(tmp_dir, priv->mmio + GPIO_DATA_DIRECTION); > + } else { > + u32 tmp_data = readl(priv->mmio + GPIO_DATA); > + > + tmp_data &= ~mask; > + writel(tmp_data, priv->mmio + GPIO_DATA); > + > + tmp_dir |= mask; > + writel(tmp_dir, priv->mmio + GPIO_DATA_DIRECTION); > + } > +} > + > +static int yhgch_get_i2c_signal(void *data, u32 mask) > +{ > + struct yhgch_connector *yhgch_connector = data; > + struct yhgch_drm_private *priv = to_yhgch_drm_private(yhgch_connector->base.dev); > + u32 tmp_dir = readl(priv->mmio + GPIO_DATA_DIRECTION); > + > + if ((tmp_dir & mask) != mask) { > + tmp_dir &= ~mask; > + writel(tmp_dir, priv->mmio + GPIO_DATA_DIRECTION); > + } > + > + return (readl(priv->mmio + GPIO_DATA) & mask) ? 1 : 0; > +} > + > +static void yhgch_ddc_setsda(void *data, int state) > +{ > + yhgch_set_i2c_signal(data, I2C_SDA_MASK, state); > +} > + > +static void yhgch_ddc_setscl(void *data, int state) > +{ > + yhgch_set_i2c_signal(data, I2C_SCL_MASK, state); > +} > + > +static int yhgch_ddc_getsda(void *data) > +{ > + return yhgch_get_i2c_signal(data, I2C_SDA_MASK); > +} > + > +static int yhgch_ddc_getscl(void *data) > +{ > + return yhgch_get_i2c_signal(data, I2C_SCL_MASK); > +} > + > +int yhgch_ddc_create(struct drm_device *drm_dev, > + struct yhgch_connector *connector) > +{ > + connector->adapter.owner = THIS_MODULE; > + snprintf(connector->adapter.name, I2C_NAME_SIZE, "INS i2c bit bus"); > + connector->adapter.dev.parent = drm_dev->dev; > + i2c_set_adapdata(&connector->adapter, connector); > + connector->adapter.algo_data = &connector->bit_data; > + > + connector->bit_data.udelay = 20; > + connector->bit_data.timeout = usecs_to_jiffies(2000); > + connector->bit_data.data = connector; > + connector->bit_data.setsda = yhgch_ddc_setsda; > + connector->bit_data.setscl = yhgch_ddc_setscl; > + connector->bit_data.getsda = yhgch_ddc_getsda; > + connector->bit_data.getscl = yhgch_ddc_getscl; > + > + return i2c_bit_add_bus(&connector->adapter); > +} > diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_regs.h b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_regs.h > new file mode 100644 > index 000000000000..d707f5186ab4 > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_regs.h > @@ -0,0 +1,209 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > + > +#ifndef YHGCH_DRM_HW_H > +#define YHGCH_DRM_HW_H > + > +/* register definition */ > +#define YHGCH_MISC_CTRL 0x4 > + > +#define YHGCH_MSCCTL_LOCALMEM_RESET(x) ((x) << 6) > +#define YHGCH_MSCCTL_LOCALMEM_RESET_MASK 0x40 > + > +#define YHGCH_CURRENT_GATE 0x000040 > +#define YHGCH_CURR_GATE_DISPLAY(x) ((x) << 2) > +#define YHGCH_CURR_GATE_DISPLAY_MASK 0x4 > + > +#define YHGCH_CURR_GATE_LOCALMEM(x) ((x) << 1) > +#define YHGCH_CURR_GATE_LOCALMEM_MASK 0x2 > + > +#define YHGCH_MODE0_GATE 0x000044 > +#define YHGCH_MODE1_GATE 0x000048 > +#define YHGCH_POWER_MODE_CTRL 0x00004C > + > +#define YHGCH_PW_MODE_CTL_OSC_INPUT(x) ((x) << 3) > +#define YHGCH_PW_MODE_CTL_OSC_INPUT_MASK 0x8 > + > +#define YHGCH_PW_MODE_CTL_MODE(x) ((x) << 0) > +#define YHGCH_PW_MODE_CTL_MODE_MASK 0x03 > +#define YHGCH_PW_MODE_CTL_MODE_SHIFT 0 > + > +#define YHGCH_PW_MODE_CTL_MODE_MODE0 0 > +#define YHGCH_PW_MODE_CTL_MODE_MODE1 1 > +#define YHGCH_PW_MODE_CTL_MODE_SLEEP 2 > + > +//#define YHGCH_CRT_PLL_CTRL 0x000060 > + > +#define YHGCH_PLL_CTRL_BYPASS(x) ((x) << 18) > +#define YHGCH_PLL_CTRL_BYPASS_MASK 0x40000 > + > +#define YHGCH_PLL_CTRL_POWER(x) ((x) << 17) > +#define YHGCH_PLL_CTRL_POWER_MASK 0x20000 > + > +#define YHGCH_PLL_CTRL_INPUT(x) ((x) << 16) > +#define YHGCH_PLL_CTRL_INPUT_MASK 0x10000 > + > +#define YHGCH_PLL_CTRL_POD(x) ((x) << 14) > +#define YHGCH_PLL_CTRL_POD_MASK 0xC000 > + > +#define YHGCH_PLL_CTRL_OD(x) ((x) << 12) > +#define YHGCH_PLL_CTRL_OD_MASK 0x3000 > + > +#define YHGCH_PLL_CTRL_N(x) ((x) << 8) > +#define YHGCH_PLL_CTRL_N_MASK 0xF00 > + > +#define YHGCH_PLL_CTRL_M(x) ((x) << 0) > +#define YHGCH_PLL_CTRL_M_MASK 0xFF > + > +#define YHGCH_CRT_DISP_CTL 0x80200 > + > +#define YHGCH_CRT_DISP_CTL_DPMS(x) ((x) << 30) > +#define YHGCH_CRT_DISP_CTL_DPMS_MASK 0xc0000000 > + > +#define YHGCH_CRT_DPMS_ON 0 > +#define YHGCH_CRT_DPMS_OFF 3 > + > +#define YHGCH_CRT_DISP_CTL_CRTSELECT(x) ((x) << 25) > +#define YHGCH_CRT_DISP_CTL_CRTSELECT_MASK 0x2000000 > + > +#define YHGCH_CRTSELECT_CRT 1 > + > +#define YHGCH_CRT_DISP_CTL_CLOCK_PHASE(x) ((x) << 14) > +#define YHGCH_CRT_DISP_CTL_CLOCK_PHASE_MASK 0x4000 > + > +#define YHGCH_CRT_DISP_CTL_VSYNC_PHASE(x) ((x) << 13) > +#define YHGCH_CRT_DISP_CTL_VSYNC_PHASE_MASK 0x2000 > + > +#define YHGCH_CRT_DISP_CTL_HSYNC_PHASE(x) ((x) << 12) > +#define YHGCH_CRT_DISP_CTL_HSYNC_PHASE_MASK 0x1000 > + > +#define YHGCH_CRT_DISP_CTL_TIMING(x) ((x) << 8) > +#define YHGCH_CRT_DISP_CTL_TIMING_MASK 0x100 > + > +#define YHGCH_CRT_DISP_CTL_PLANE(x) ((x) << 2) > +#define YHGCH_CRT_DISP_CTL_PLANE_MASK 4 > + > +#define YHGCH_CRT_DISP_CTL_FORMAT(x) ((x) << 0) > +#define YHGCH_CRT_DISP_CTL_FORMAT_MASK 0x03 > + > +#define YHGCH_CRT_FB_ADDRESS 0x080204 > + > +#define YHGCH_CRT_FB_WIDTH 0x080208 > +#define YHGCH_CRT_FB_WIDTH_WIDTH(x) ((x) << 16) > +#define YHGCH_CRT_FB_WIDTH_WIDTH_MASK 0x3FFF0000 > +#define YHGCH_CRT_FB_WIDTH_OFFS(x) ((x) << 0) > +#define YHGCH_CRT_FB_WIDTH_OFFS_MASK 0x3FFF > + > +#define YHGCH_CRT_HORZ_TOTAL 0x08020C > +#define YHGCH_CRT_HORZ_TOTAL_TOTAL(x) ((x) << 16) > +#define YHGCH_CRT_HORZ_TOTAL_TOTAL_MASK 0xFFF0000 > + > +#define YHGCH_CRT_HORZ_TOTAL_DISP_END(x) ((x) << 0) > +#define YHGCH_CRT_HORZ_TOTAL_DISP_END_MASK 0xFFF > + > +#define YHGCH_CRT_HORZ_SYNC 0x080210 > +#define YHGCH_CRT_HORZ_SYNC_WIDTH(x) ((x) << 16) > +#define YHGCH_CRT_HORZ_SYNC_WIDTH_MASK 0xFF0000 > + > +#define YHGCH_CRT_HORZ_SYNC_START(x) ((x) << 0) > +#define YHGCH_CRT_HORZ_SYNC_START_MASK 0xFFF > + > +#define YHGCH_CRT_VERT_TOTAL 0x080214 > +#define YHGCH_CRT_VERT_TOTAL_TOTAL(x) ((x) << 16) > +#define YHGCH_CRT_VERT_TOTAL_TOTAL_MASK 0x7FFF0000 > + > +#define YHGCH_CRT_VERT_TOTAL_DISP_END(x) ((x) << 0) > +#define YHGCH_CRT_VERT_TOTAL_DISP_END_MASK 0x7FF > + > +#define YHGCH_CRT_VERT_SYNC 0x080218 > +#define YHGCH_CRT_VERT_SYNC_HEIGHT(x) ((x) << 16) > +#define YHGCH_CRT_VERT_SYNC_HEIGHT_MASK 0x3F0000 > + > +#define YHGCH_CRT_VERT_SYNC_START(x) ((x) << 0) > +#define YHGCH_CRT_VERT_SYNC_START_MASK 0x7FF > + > +/* Hardware Cursor */ > +#define YHGCH_HWC_ADDRESS 0x080230 > +#define YHGCH_HWC_ADDRESS_ENABLE(x) ((x) << 31) > +#define YHGCH_HWC_ADDRESS_ENABLE_MASK 0x80000000 > +#define YHGCH_HWC_ADDRESS_ADDRESS(x) ((x) << 0) > +#define YHGCH_HWC_ADDRESS_ADDRESS_MASK 0xFFFFFFF > + > +#define YHGCH_HWC_LOCATION 0x080234 > +#define YHGCH_HWC_LOCATION_TOP(x) ((x) << 27) > +#define YHGCH_HWC_LOCATION_TOP_MASK 0x8000000 > +#define YHGCH_HWC_LOCATION_Y(x) ((x) << 16) > +#define YHGCH_HWC_LOCATION_Y_MASK 0x7FF0000 > +#define YHGCH_HWC_LOCATION_LEFT(x) ((x) << 11) > +#define YHGCH_HWC_LOCATION_LEFT_MASK 0x800 > +#define YHGCH_HWC_LOCATION_X(x) ((x) << 0) > +#define YHGCH_HWC_LOCATION_X_MASK 0x7FF > + > +#define YHGCH_HWC_COLOR_12 0x080238 > +#define YHGCH_HWC_COLOR_12_2_RGB(x) ((x) << 16) > +#define YHGCH_HWC_COLOR_12_2_RGB_MASK 0xFFFF0000 > +#define YHGCH_HWC_COLOR_12_1_RGB(x) ((x) << 0) > +#define YHGCH_HWC_COLOR_12_1_RGB_MASK 0xFFFF > + > +#define YHGCH_HWC_COLOR_3 0x08023C > +#define YHGCH_HWC_COLOR_3_RGB(x) ((x) << 0) > +#define YHGCH_HWC_COLOR_3_RGB_MASK 0xFFFF > + > +/* Auto Centering */ > +#define YHGCH_CRT_AUTO_CENTERING_TL 0x080280 > +#define YHGCH_CRT_AUTO_CENTERING_TL_TOP(x) ((x) << 16) > +#define YHGCH_CRT_AUTO_CENTERING_TL_TOP_MASK 0x7FF0000 > + > +#define YHGCH_CRT_AUTO_CENTERING_TL_LEFT(x) ((x) << 0) > +#define YHGCH_CRT_AUTO_CENTERING_TL_LEFT_MASK 0x7FF > + > +#define YHGCH_CRT_AUTO_CENTERING_BR 0x080284 > +#define YHGCH_CRT_AUTO_CENTERING_BR_BOTTOM(x) ((x) << 16) > +#define YHGCH_CRT_AUTO_CENTERING_BR_BOTTOM_MASK 0x7FF0000 > + > +#define YHGCH_CRT_AUTO_CENTERING_BR_RIGHT(x) ((x) << 0) > +#define YHGCH_CRT_AUTO_CENTERING_BR_RIGHT_MASK 0x7FF > + > +/* register to control panel output */ > +#define YHGCH_DISPLAY_CONTROL_HISILE 0x80288 > +#define YHGCH_DISPLAY_CONTROL_FPVDDEN(x) ((x) << 0) > +#define YHGCH_DISPLAY_CONTROL_PANELDATE(x) ((x) << 1) > +#define YHGCH_DISPLAY_CONTROL_FPEN(x) ((x) << 2) > +#define YHGCH_DISPLAY_CONTROL_VBIASEN(x) ((x) << 3) > + > +#define YHGCH_RAW_INTERRUPT 0x80290 > +#define YHGCH_RAW_INTERRUPT_VBLANK(x) ((x) << 2) > +#define YHGCH_RAW_INTERRUPT_VBLANK_MASK 0x4 > + > +#define YHGCH_RAW_INTERRUPT_EN 0x80298 > +#define YHGCH_RAW_INTERRUPT_EN_VBLANK(x) ((x) << 2) > +#define YHGCH_RAW_INTERRUPT_EN_VBLANK_MASK 0x4 > + > +/* register and values for PLL control */ > +#define CRT_PLL1_NS 0x802a8 > +#define CRT_PLL1_NS_OUTER_BYPASS(x) ((x) << 30) > +#define CRT_PLL1_NS_INTER_BYPASS(x) ((x) << 29) > +#define CRT_PLL1_NS_POWERON(x) ((x) << 24) > + > +#define CRT_PLL1_NS_25MHZ 0x00006691 //640x480 > +#define CRT_PLL1_NS_40MHZ 0x00004580 //800x600 > +#define CRT_PLL1_NS_65MHZ 0x00002568 //1024x768 > +#define CRT_PLL1_NS_83MHZ 0x000027bb //1280x800 > +#define CRT_PLL1_NS_106MHZ 0x000027ef //1440x900 > +#define CRT_PLL1_NS_108MHZ 0x000027f2 //1280x1024 > +#define CRT_PLL1_NS_146MHZ 0x00001575 //1680x1050 > +#define CRT_PLL1_NS_148MHZ 0x0000145f //1920x1080 > +#define CRT_PLL1_NS_193MHZ 0x000018f7 //1920x1200 > + > +#define CRT_PLL2_NS 0x802ac > +#define CRT_PLL2_NS_25MHZ 0x0 > +#define CRT_PLL2_NS_40MHZ 0x0 > +#define CRT_PLL2_NS_65MHZ 0x0 > +#define CRT_PLL2_NS_83MHZ 0x0 > +#define CRT_PLL2_NS_106MHZ 0x0 > +#define CRT_PLL2_NS_108MHZ 0x0 > +#define CRT_PLL2_NS_146MHZ 0x0 > +#define CRT_PLL2_NS_148MHZ 0x0 > +#define CRT_PLL2_NS_193MHZ 0x0 > + > +#define YHGCH_FIELD(field, value) (field(value) & field##_MASK) > +#endif > diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_vdac.c b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_vdac.c > new file mode 100644 > index 000000000000..5a22b8ed007f > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_vdac.c > @@ -0,0 +1,116 @@ > +// SPDX-License-Identifier: GPL-2.0 > + > +#include <linux/io.h> > + > +#include <drm/drm_atomic_helper.h> > +#include <drm/drm_edid.h> > +#include <drm/drm_probe_helper.h> > +#include <drm/drm_print.h> > +#include <drm/drm_simple_kms_helper.h> > + > +#include "yhgch_drm_drv.h" > +#include "yhgch_drm_regs.h" > + > +static int yhgch_connector_get_modes(struct drm_connector *connector) > +{ > + int count; > + void *edid; > + struct yhgch_connector *yhgch_connector = to_yhgch_connector(connector); > + > + edid = drm_get_edid(connector, &yhgch_connector->adapter); > + if (edid) { > + drm_connector_update_edid_property(connector, edid); > + count = drm_add_edid_modes(connector, edid); > + if (count) > + goto out; > + } > + > + count = drm_add_modes_noedid(connector, > + connector->dev->mode_config.max_width, > + connector->dev->mode_config.max_height); > + drm_set_preferred_mode(connector, 1024, 768); > + > +out: > + kfree(edid); > + return count; > +} > + > +static void yhgch_connector_destroy(struct drm_connector *connector) > +{ > + struct yhgch_connector *yhgch_connector = to_yhgch_connector(connector); > + > + i2c_del_adapter(&yhgch_connector->adapter); Please see the code liked at [2] to see how it uses managed cleanup of the DDC resources. Please adapt it for your driver and remove yhgch_connector_destroy(). The drm_connector_funcs.destroy can refer directly to drm_connector_cleanup. > + drm_connector_cleanup(connector); > +} > + > +static const struct drm_connector_helper_funcs > + yhgch_connector_helper_funcs = { > + .get_modes = yhgch_connector_get_modes, Please don't re-implement get_modes. For your simple use case, please use drm_connector_helper_get_modes() [3] https://elixir.bootlin.com/linux/v6.16.3/source/drivers/gpu/drm/drm_probe_helper.c#L1198 On connector status: As you have a VGA connector, the display might be disconnected. Set detect_ctx to drm_connector_helper_detect_from_ddc. You also have to set connector->polled to DRM_CONNECTOR_POLL_CONNECT | DRM_CONNECTOR_POLL_DISCONNECT and call drm_kms_helper_poll_init(). Study the connector code in mgag200. It's very similar to your use case. Let me know if you have a transparent BMC output attached to your connector. Things are slightly different then. Best regards Thomas > +}; > + > +static const struct drm_connector_funcs yhgch_connector_funcs = { > + .fill_modes = drm_helper_probe_single_connector_modes, > + .destroy = yhgch_connector_destroy, > + .reset = drm_atomic_helper_connector_reset, > + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, > + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, > +}; > + > +static void yhgch_encoder_mode_set(struct drm_encoder *encoder, > + struct drm_display_mode *mode, > + struct drm_display_mode *adj_mode) > +{ > + u32 reg; > + struct drm_device *dev = encoder->dev; > + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); > + > + reg = readl(priv->mmio + YHGCH_DISPLAY_CONTROL_HISILE); > + reg |= YHGCH_DISPLAY_CONTROL_FPVDDEN(1); > + reg |= YHGCH_DISPLAY_CONTROL_PANELDATE(1); > + reg |= YHGCH_DISPLAY_CONTROL_FPEN(1); > + reg |= YHGCH_DISPLAY_CONTROL_VBIASEN(1); > + writel(reg, priv->mmio + YHGCH_DISPLAY_CONTROL_HISILE); > +} > + > +static const struct drm_encoder_helper_funcs yhgch_encoder_helper_funcs = { > + .mode_set = yhgch_encoder_mode_set, > +}; > + > +int yhgch_vdac_init(struct yhgch_drm_private *priv) > +{ > + struct drm_device *dev = &priv->dev; > + struct yhgch_connector *yhgch_connector = &priv->connector; > + struct drm_encoder *encoder = &priv->encoder; > + struct drm_crtc *crtc = &priv->crtc; > + struct drm_connector *connector = &yhgch_connector->base; > + int ret; > + > + ret = yhgch_ddc_create(dev, yhgch_connector); > + if (ret) { > + drm_err(dev, "failed to create ddc: %d\n", ret); > + return ret; > + } > + > + encoder->possible_crtcs = drm_crtc_mask(crtc); > + ret = drm_simple_encoder_init(dev, encoder, DRM_MODE_ENCODER_DAC); > + if (ret) { > + drm_err(dev, "failed to init encoder: %d\n", ret); > + return ret; > + } > + > + drm_encoder_helper_add(encoder, &yhgch_encoder_helper_funcs); > + > + ret = drm_connector_init_with_ddc(dev, connector, > + &yhgch_connector_funcs, > + DRM_MODE_CONNECTOR_VGA, > + &yhgch_connector->adapter); > + if (ret) { > + drm_err(dev, "failed to init connector: %d\n", ret); > + return ret; > + } > + drm_connector_helper_add(connector, &yhgch_connector_helper_funcs); > + > + drm_connector_attach_encoder(connector, encoder); > + > + return 0; > +} -- -- Thomas Zimmermann Graphics Driver Developer SUSE Software Solutions Germany GmbH Frankenstrasse 146, 90461 Nuernberg, Germany GF: Ivo Totev, Andrew Myers, Andrew McDonald, Boudien Moerman HRB 36809 (AG Nuernberg) ^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH v2 0/1] [DRIVER] gpu: drm: add support for Yhgc ZX1000 soc chipset 2025-08-27 9:17 ` Thomas Zimmermann @ 2025-09-03 5:45 ` chuguangqing 2025-09-03 5:45 ` [PATCH v2 1/1] " chuguangqing 0 siblings, 1 reply; 22+ messages in thread From: chuguangqing @ 2025-09-03 5:45 UTC (permalink / raw) To: tzimmermann, maarten.lankhorst, mripard, airlied, simona Cc: linux-kernel, dri-devel, chuguangqing 1. Delete unnecessary comments 2. Delete unnecessary branch 3. Use drm_atomic_helper_check_plane_state 4. remove the alpha formats form this list. 5. use w,h rather than x, y 7. delete type casting 8. use a simple call to drm_atomic_helper_shutdown() 9. delete yhgch_load function 10. delete vblanking code 11. delete unneeded i2c type Some other hardware-related issues cannot be confirmed for the time being, but the current code has passed the test. chuguangqing (1): [DRIVER] gpu: drm: add support for Yhgc ZX1000 soc chipset MAINTAINERS | 5 + drivers/gpu/drm/Kconfig | 2 + drivers/gpu/drm/Makefile | 1 + drivers/gpu/drm/yhgch/Kconfig | 3 + drivers/gpu/drm/yhgch/Makefile | 1 + drivers/gpu/drm/yhgch/yhgch-drm/Kconfig | 12 + drivers/gpu/drm/yhgch/yhgch-drm/Makefile | 5 + .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_de.c | 428 ++++++++++++++++++ .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.c | 324 +++++++++++++ .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.h | 54 +++ .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_i2c.c | 108 +++++ .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_regs.h | 209 +++++++++ .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_vdac.c | 110 +++++ 13 files changed, 1262 insertions(+) create mode 100644 drivers/gpu/drm/yhgch/Kconfig create mode 100644 drivers/gpu/drm/yhgch/Makefile create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/Kconfig create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/Makefile create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_de.c create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.c create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.h create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_i2c.c create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_regs.h create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_vdac.c -- 2.43.5 ^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH v2 1/1] [DRIVER] gpu: drm: add support for Yhgc ZX1000 soc chipset 2025-09-03 5:45 ` [PATCH v2 0/1] " chuguangqing @ 2025-09-03 5:45 ` chuguangqing 2025-09-04 11:19 ` Thomas Zimmermann 0 siblings, 1 reply; 22+ messages in thread From: chuguangqing @ 2025-09-03 5:45 UTC (permalink / raw) To: tzimmermann, maarten.lankhorst, mripard, airlied, simona Cc: linux-kernel, dri-devel, chuguangqing add support for Yhgc BMC soc chipset Signed-off-by: chuguangqing <chuguangqing@inspur.com> --- MAINTAINERS | 5 + drivers/gpu/drm/Kconfig | 2 + drivers/gpu/drm/Makefile | 1 + drivers/gpu/drm/yhgch/Kconfig | 3 + drivers/gpu/drm/yhgch/Makefile | 1 + drivers/gpu/drm/yhgch/yhgch-drm/Kconfig | 12 + drivers/gpu/drm/yhgch/yhgch-drm/Makefile | 5 + .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_de.c | 428 ++++++++++++++++++ .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.c | 324 +++++++++++++ .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.h | 54 +++ .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_i2c.c | 108 +++++ .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_regs.h | 209 +++++++++ .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_vdac.c | 110 +++++ 13 files changed, 1262 insertions(+) create mode 100644 drivers/gpu/drm/yhgch/Kconfig create mode 100644 drivers/gpu/drm/yhgch/Makefile create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/Kconfig create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/Makefile create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_de.c create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.c create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.h create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_i2c.c create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_regs.h create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_vdac.c diff --git a/MAINTAINERS b/MAINTAINERS index 10614ca41ed0..c79d9361fa81 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -27744,6 +27744,11 @@ S: Maintained F: Documentation/input/devices/yealink.rst F: drivers/input/misc/yealink.* +YHGC DRM DRIVER +M: chuguangqing <chuguangqing@inspur.com> +S: Maintained +F: drivers/gpu/drm/yhgch + Z8530 DRIVER FOR AX.25 M: Joerg Reuter <jreuter@yaina.de> L: linux-hams@vger.kernel.org diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index f7ea8e895c0c..8e0b1d12c81f 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -396,6 +396,8 @@ source "drivers/gpu/drm/sprd/Kconfig" source "drivers/gpu/drm/imagination/Kconfig" +source "drivers/gpu/drm/yhgch/Kconfig" + config DRM_HYPERV tristate "DRM Support for Hyper-V synthetic video device" depends on DRM && PCI && HYPERV diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile index 4dafbdc8f86a..f344e0173b29 100644 --- a/drivers/gpu/drm/Makefile +++ b/drivers/gpu/drm/Makefile @@ -231,6 +231,7 @@ obj-y += solomon/ obj-$(CONFIG_DRM_SPRD) += sprd/ obj-$(CONFIG_DRM_LOONGSON) += loongson/ obj-$(CONFIG_DRM_POWERVR) += imagination/ +obj-$(CONFIG_DRM_YHGCH) += yhgch/ # Ensure drm headers are self-contained and pass kernel-doc hdrtest-files := \ diff --git a/drivers/gpu/drm/yhgch/Kconfig b/drivers/gpu/drm/yhgch/Kconfig new file mode 100644 index 000000000000..4d2f473dbb4a --- /dev/null +++ b/drivers/gpu/drm/yhgch/Kconfig @@ -0,0 +1,3 @@ +# License: GPL-2.0 + +source "drivers/gpu/drm/yhgch/yhgch-drm/Kconfig" diff --git a/drivers/gpu/drm/yhgch/Makefile b/drivers/gpu/drm/yhgch/Makefile new file mode 100644 index 000000000000..c5229239002b --- /dev/null +++ b/drivers/gpu/drm/yhgch/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_DRM_YHGCH) += yhgch-drm/ diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/Kconfig b/drivers/gpu/drm/yhgch/yhgch-drm/Kconfig new file mode 100644 index 000000000000..10d586bbe897 --- /dev/null +++ b/drivers/gpu/drm/yhgch/yhgch-drm/Kconfig @@ -0,0 +1,12 @@ +config DRM_YHGCH + tristate "DRM Support for Yhgch BMC" + depends on DRM && PCI && MMU + select DRM_CLIENT_SELECTION + select DRM_KMS_HELPER + select DRM_VRAM_HELPER + select DRM_TTM_HELPER + help + Choose this option if you have a Yhgch soc chipset. + If M is selected the module will be called yhgch - drm. + IF Y is selected the module will be built into the kernel. + IF N is selected the module will be excluded from the kernel. diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/Makefile b/drivers/gpu/drm/yhgch/yhgch-drm/Makefile new file mode 100644 index 000000000000..e9cc4dc6568d --- /dev/null +++ b/drivers/gpu/drm/yhgch/yhgch-drm/Makefile @@ -0,0 +1,5 @@ +yhgch-drm-y := yhgch_drm_drv.o yhgch_drm_de.o yhgch_drm_vdac.o yhgch_drm_i2c.o + +obj-$(CONFIG_DRM_YHGCH) += yhgch-drm.o + + diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_de.c b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_de.c new file mode 100644 index 000000000000..a8463121190c --- /dev/null +++ b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_de.c @@ -0,0 +1,428 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include <linux/delay.h> +#include <drm/drm_atomic.h> +#include <drm/drm_atomic_helper.h> +#include <drm/drm_fourcc.h> + +#include <drm/drm_gem_vram_helper.h> +#include <drm/drm_vblank.h> + +#include "yhgch_drm_drv.h" +#include "yhgch_drm_regs.h" + +struct yhgch_dislay_pll_config { + u64 hdisplay; + u64 vdisplay; + u32 pll1_config_value; + u32 pll2_config_value; +}; + +static const struct yhgch_dislay_pll_config yhgch_pll_table[] = { + { 640, 480, CRT_PLL1_NS_25MHZ, CRT_PLL2_NS_25MHZ }, + { 800, 600, CRT_PLL1_NS_40MHZ, CRT_PLL2_NS_40MHZ }, + { 1024, 768, CRT_PLL1_NS_65MHZ, CRT_PLL2_NS_65MHZ }, + { 1280, 1024, CRT_PLL1_NS_108MHZ, CRT_PLL2_NS_108MHZ }, + { 1920, 1080, CRT_PLL1_NS_148MHZ, CRT_PLL2_NS_148MHZ }, +}; + +static int yhgch_plane_atomic_check(struct drm_plane *plane, + struct drm_atomic_state *state) +{ + struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state, + plane); + struct drm_framebuffer *fb = new_plane_state->fb; + struct drm_crtc_state *new_crtc_state = NULL; + int ret; + + if (!fb) + return 0; + + if (new_plane_state->crtc) + new_crtc_state = drm_atomic_get_new_crtc_state(state, new_plane_state->crtc); + + if (new_plane_state->crtc_x + new_plane_state->crtc_w > + new_crtc_state->adjusted_mode.hdisplay || + new_plane_state->crtc_y + new_plane_state->crtc_h > + new_crtc_state->adjusted_mode.vdisplay) { + drm_dbg_atomic(plane->dev, "visible portion of plane is invalid\n"); + return -EINVAL; + } + + if (new_plane_state->fb->pitches[0] % 16 != 0) { + drm_dbg_atomic(plane->dev, "wrong stride with 16-byte aligned\n"); + return -EINVAL; + } + + ret = drm_atomic_helper_check_plane_state(new_plane_state, new_crtc_state, + DRM_PLANE_NO_SCALING, + DRM_PLANE_NO_SCALING, + false, true); + if (ret) { + return ret; + } else if (!new_plane_state->visible) { + if (drm_WARN_ON(plane->dev, new_plane_state->crtc)) /* cannot legally happen */ + return -EINVAL; + else + return 0; + } + return 0; +} + +static void yhgch_plane_atomic_update(struct drm_plane *plane, + struct drm_atomic_state *state) +{ + struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state, + plane); + u32 reg; + s64 gpu_addr = 0; + u32 line_l; + struct yhgch_drm_private *priv = to_yhgch_drm_private(plane->dev); + struct drm_gem_vram_object *gbo; + + if (!new_state->fb) + return; + + gbo = drm_gem_vram_of_gem(new_state->fb->obj[0]); + + gpu_addr = drm_gem_vram_offset(gbo); + if (gpu_addr < 0) + return; + + writel(gpu_addr, priv->mmio + YHGCH_CRT_FB_ADDRESS); + + reg = new_state->fb->width * (new_state->fb->format->cpp[0]); + + line_l = new_state->fb->pitches[0]; + writel(YHGCH_FIELD(YHGCH_CRT_FB_WIDTH_WIDTH, reg) | + YHGCH_FIELD(YHGCH_CRT_FB_WIDTH_OFFS, line_l), + priv->mmio + YHGCH_CRT_FB_WIDTH); + + /* SET PIXEL FORMAT */ + reg = readl(priv->mmio + YHGCH_CRT_DISP_CTL); + reg &= ~YHGCH_CRT_DISP_CTL_FORMAT_MASK; + reg |= YHGCH_FIELD(YHGCH_CRT_DISP_CTL_FORMAT, + new_state->fb->format->cpp[0] * 8 / 16); + writel(reg, priv->mmio + YHGCH_CRT_DISP_CTL); +} + +static const u32 channel_formats1[] = { + DRM_FORMAT_RGB565, DRM_FORMAT_RGB888, + DRM_FORMAT_XRGB8888, DRM_FORMAT_RGBA8888, DRM_FORMAT_ARGB8888 +}; + +static struct drm_plane_funcs yhgch_plane_funcs = { + .update_plane = drm_atomic_helper_update_plane, + .disable_plane = drm_atomic_helper_disable_plane, + .destroy = drm_plane_cleanup, + .reset = drm_atomic_helper_plane_reset, + .atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_plane_destroy_state, +}; + +static const struct drm_plane_helper_funcs yhgch_plane_helper_funcs = { + DRM_GEM_VRAM_PLANE_HELPER_FUNCS, + .atomic_check = yhgch_plane_atomic_check, + .atomic_update = yhgch_plane_atomic_update, +}; + +static void yhgch_crtc_dpms(struct drm_crtc *crtc, u32 dpms) +{ + struct yhgch_drm_private *priv = to_yhgch_drm_private(crtc->dev); + u32 reg; + + reg = readl(priv->mmio + YHGCH_CRT_DISP_CTL); + reg &= ~YHGCH_CRT_DISP_CTL_DPMS_MASK; + reg |= YHGCH_FIELD(YHGCH_CRT_DISP_CTL_DPMS, dpms); + reg &= ~YHGCH_CRT_DISP_CTL_TIMING_MASK; + if (dpms == YHGCH_CRT_DPMS_ON) + reg |= YHGCH_CRT_DISP_CTL_TIMING(1); + writel(reg, priv->mmio + YHGCH_CRT_DISP_CTL); +} + +static void yhgch_crtc_atomic_enable(struct drm_crtc *crtc, + struct drm_atomic_state *old_state) +{ + u32 reg; + struct yhgch_drm_private *priv = to_yhgch_drm_private(crtc->dev); + + yhgch_set_power_mode(priv, YHGCH_PW_MODE_CTL_MODE_MODE0); + + /* Enable display power gate & LOCALMEM power gate */ + reg = readl(priv->mmio + YHGCH_CURRENT_GATE); + reg &= ~YHGCH_CURR_GATE_LOCALMEM_MASK; + reg &= ~YHGCH_CURR_GATE_DISPLAY_MASK; + reg |= YHGCH_CURR_GATE_LOCALMEM(1); + reg |= YHGCH_CURR_GATE_DISPLAY(1); + yhgch_set_current_gate(priv, reg); + yhgch_crtc_dpms(crtc, YHGCH_CRT_DPMS_ON); +} + +static void yhgch_crtc_atomic_disable(struct drm_crtc *crtc, + struct drm_atomic_state *old_state) +{ + u32 reg; + struct yhgch_drm_private *priv = to_yhgch_drm_private(crtc->dev); + + yhgch_crtc_dpms(crtc, YHGCH_CRT_DPMS_OFF); + + yhgch_set_power_mode(priv, YHGCH_PW_MODE_CTL_MODE_SLEEP); + + /* Enable display power gate & LOCALMEM power gate */ + reg = readl(priv->mmio + YHGCH_CURRENT_GATE); + reg &= ~YHGCH_CURR_GATE_LOCALMEM_MASK; + reg &= ~YHGCH_CURR_GATE_DISPLAY_MASK; + reg |= YHGCH_CURR_GATE_LOCALMEM(0); + reg |= YHGCH_CURR_GATE_DISPLAY(0); + yhgch_set_current_gate(priv, reg); +} + +static enum drm_mode_status +yhgch_crtc_mode_valid(struct drm_crtc *crtc, + const struct drm_display_mode *mode) +{ + size_t i = 0; + int vrefresh = drm_mode_vrefresh(mode); + + if (vrefresh < 59 || vrefresh > 61) + return MODE_NOCLOCK; + + for (i = 0; i < ARRAY_SIZE(yhgch_pll_table); i++) { + if (yhgch_pll_table[i].hdisplay == mode->hdisplay && + yhgch_pll_table[i].vdisplay == mode->vdisplay) + return MODE_OK; + } + + return MODE_BAD; +} + +static void set_vclock_yhgch(struct drm_device *dev, u64 pll) +{ + u32 val; + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); + + val = readl(priv->mmio + CRT_PLL1_NS); + val &= ~(CRT_PLL1_NS_OUTER_BYPASS(1)); + writel(val, priv->mmio + CRT_PLL1_NS); + + val = CRT_PLL1_NS_INTER_BYPASS(1) | CRT_PLL1_NS_POWERON(1); + writel(val, priv->mmio + CRT_PLL1_NS); + + writel(pll, priv->mmio + CRT_PLL1_NS); + + usleep_range(1000, 2000); + + val = pll & ~(CRT_PLL1_NS_POWERON(1)); + writel(val, priv->mmio + CRT_PLL1_NS); + + usleep_range(1000, 2000); + + val &= ~(CRT_PLL1_NS_INTER_BYPASS(1)); + writel(val, priv->mmio + CRT_PLL1_NS); + + usleep_range(1000, 2000); + + val |= CRT_PLL1_NS_OUTER_BYPASS(1); + writel(val, priv->mmio + CRT_PLL1_NS); +} + +static void get_pll_config(u64 x, u64 y, u32 *pll1, u32 *pll2) +{ + size_t i; + size_t count = ARRAY_SIZE(yhgch_pll_table); + + for (i = 0; i < count; i++) { + if (yhgch_pll_table[i].hdisplay == x && + yhgch_pll_table[i].vdisplay == y) { + *pll1 = yhgch_pll_table[i].pll1_config_value; + *pll2 = yhgch_pll_table[i].pll2_config_value; + return; + } + } + + /* if found none, we use default value */ + *pll1 = CRT_PLL1_NS_25MHZ; + *pll2 = CRT_PLL2_NS_25MHZ; +} + +/* + * This function takes care the extra registers and bit fields required to + * setup a mode in board. + * Explanation about Display Control register: + * FPGA only supports 7 predefined pixel clocks, and clock select is + * in bit 4:0 of new register 0x802a8. + */ +static u32 display_ctrl_adjust(struct drm_device *dev, + struct drm_display_mode *mode, + u32 ctrl) +{ + u64 w, h; + u32 pll1; /* bit[31:0] of PLL */ + u32 pll2; /* bit[63:32] of PLL */ + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); + + w = mode->hdisplay; + h = mode->vdisplay; + + get_pll_config(w, h, &pll1, &pll2); + writel(pll2, priv->mmio + CRT_PLL2_NS); + set_vclock_yhgch(dev, pll1); + + /* + * yhgch has to set up the top-left and bottom-right + * registers as well. + * Note that normal chip only use those two register for + * auto-centering mode. + */ + writel(YHGCH_FIELD(YHGCH_CRT_AUTO_CENTERING_TL_TOP, 0) | + YHGCH_FIELD(YHGCH_CRT_AUTO_CENTERING_TL_LEFT, 0), + priv->mmio + YHGCH_CRT_AUTO_CENTERING_TL); + + writel(YHGCH_FIELD(YHGCH_CRT_AUTO_CENTERING_BR_BOTTOM, h - 1) | + YHGCH_FIELD(YHGCH_CRT_AUTO_CENTERING_BR_RIGHT, w - 1), + priv->mmio + YHGCH_CRT_AUTO_CENTERING_BR); + + /* + * Assume common fields in ctrl have been properly set before + * calling this function. + * This function only sets the extra fields in ctrl. + */ + + /* Set bit 25 of display controller: Select CRT or VGA clock */ + ctrl &= ~YHGCH_CRT_DISP_CTL_CRTSELECT_MASK; + ctrl &= ~YHGCH_CRT_DISP_CTL_CLOCK_PHASE_MASK; + + ctrl |= YHGCH_CRT_DISP_CTL_CRTSELECT(YHGCH_CRTSELECT_CRT); + + /* clock_phase_polarity is 0 */ + ctrl |= YHGCH_CRT_DISP_CTL_CLOCK_PHASE(0); + ctrl |= YHGCH_FIELD(YHGCH_CRT_DISP_CTL_FORMAT, 2); + + writel(ctrl, priv->mmio + YHGCH_CRT_DISP_CTL); + + return ctrl; +} + +static void yhgch_crtc_mode_set_nofb(struct drm_crtc *crtc) +{ + u32 val; + struct drm_display_mode *mode = &crtc->state->mode; + struct drm_device *dev = crtc->dev; + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); + u32 width = mode->hsync_end - mode->hsync_start; + u32 height = mode->vsync_end - mode->vsync_start; + + //writel(format_pll_reg(), priv->mmio + YHGCH_CRT_PLL_CTRL); + writel(YHGCH_FIELD(YHGCH_CRT_HORZ_TOTAL_TOTAL, mode->htotal - 1) | + YHGCH_FIELD(YHGCH_CRT_HORZ_TOTAL_DISP_END, mode->hdisplay - 1), + priv->mmio + YHGCH_CRT_HORZ_TOTAL); + + writel(YHGCH_FIELD(YHGCH_CRT_HORZ_SYNC_WIDTH, width) | + YHGCH_FIELD(YHGCH_CRT_HORZ_SYNC_START, mode->hsync_start - 1), + priv->mmio + YHGCH_CRT_HORZ_SYNC); + + writel(YHGCH_FIELD(YHGCH_CRT_VERT_TOTAL_TOTAL, mode->vtotal - 1) | + YHGCH_FIELD(YHGCH_CRT_VERT_TOTAL_DISP_END, mode->vdisplay - 1), + priv->mmio + YHGCH_CRT_VERT_TOTAL); + + writel(YHGCH_FIELD(YHGCH_CRT_VERT_SYNC_HEIGHT, height) | + YHGCH_FIELD(YHGCH_CRT_VERT_SYNC_START, mode->vsync_start - 1), + priv->mmio + YHGCH_CRT_VERT_SYNC); + + val = YHGCH_FIELD(YHGCH_CRT_DISP_CTL_VSYNC_PHASE, 0); + val |= YHGCH_FIELD(YHGCH_CRT_DISP_CTL_HSYNC_PHASE, 0); + val |= YHGCH_CRT_DISP_CTL_TIMING(1); + val |= YHGCH_CRT_DISP_CTL_PLANE(1); + + display_ctrl_adjust(dev, mode, val); +} + +static void yhgch_crtc_atomic_begin(struct drm_crtc *crtc, + struct drm_atomic_state *old_state) +{ + u32 reg; + struct drm_device *dev = crtc->dev; + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); + + yhgch_set_power_mode(priv, YHGCH_PW_MODE_CTL_MODE_MODE0); + + /* Enable display power gate & LOCALMEM power gate */ + reg = readl(priv->mmio + YHGCH_CURRENT_GATE); + reg &= ~YHGCH_CURR_GATE_DISPLAY_MASK; + reg &= ~YHGCH_CURR_GATE_LOCALMEM_MASK; + reg |= YHGCH_CURR_GATE_DISPLAY(1); + reg |= YHGCH_CURR_GATE_LOCALMEM(1); + yhgch_set_current_gate(priv, reg); + + /* We can add more initialization as needed. */ +} + +static void yhgch_crtc_atomic_flush(struct drm_crtc *crtc, + struct drm_atomic_state *state) + +{ + unsigned long flags; + + spin_lock_irqsave(&crtc->dev->event_lock, flags); + if (crtc->state->event) + drm_crtc_send_vblank_event(crtc, crtc->state->event); + crtc->state->event = NULL; + spin_unlock_irqrestore(&crtc->dev->event_lock, flags); +} + +static const struct drm_crtc_funcs yhgch_crtc_funcs = { + .page_flip = drm_atomic_helper_page_flip, + .set_config = drm_atomic_helper_set_config, + .destroy = drm_crtc_cleanup, + .reset = drm_atomic_helper_crtc_reset, + .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state, + +}; + +static const struct drm_crtc_helper_funcs yhgch_crtc_helper_funcs = { + .mode_set_nofb = yhgch_crtc_mode_set_nofb, + .atomic_begin = yhgch_crtc_atomic_begin, + .atomic_flush = yhgch_crtc_atomic_flush, + .atomic_enable = yhgch_crtc_atomic_enable, + .atomic_disable = yhgch_crtc_atomic_disable, + .mode_valid = yhgch_crtc_mode_valid, +}; + +int yhgch_de_init(struct yhgch_drm_private *priv) +{ + struct drm_device *dev = &priv->dev; + struct drm_crtc *crtc = &priv->crtc; + struct drm_plane *plane = &priv->primary_plane; + int ret; + + ret = drm_universal_plane_init(dev, plane, 1, &yhgch_plane_funcs, + channel_formats1, + ARRAY_SIZE(channel_formats1), + NULL, + DRM_PLANE_TYPE_PRIMARY, + NULL); + + if (ret) { + drm_err(dev, "failed to init plane: %d\n", ret); + return ret; + } + + drm_plane_helper_add(plane, &yhgch_plane_helper_funcs); + + ret = drm_crtc_init_with_planes(dev, crtc, plane, + NULL, &yhgch_crtc_funcs, NULL); + if (ret) { + drm_err(dev, "failed to init crtc: %d\n", ret); + return ret; + } + + ret = drm_mode_crtc_set_gamma_size(crtc, 256); + if (ret) { + drm_err(dev, "failed to set gamma size: %d\n", ret); + return ret; + } + drm_crtc_helper_add(crtc, &yhgch_crtc_helper_funcs); + + return 0; +} diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.c b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.c new file mode 100644 index 000000000000..32a3126c5436 --- /dev/null +++ b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.c @@ -0,0 +1,324 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include "yhgch_drm_drv.h" + +#include <linux/module.h> +#include <linux/pci.h> + +#include <linux/aperture.h> +#include <drm/clients/drm_client_setup.h> + +#include <drm/drm_atomic_helper.h> +#include <drm/drm_drv.h> +#include <drm/drm_fbdev_ttm.h> + +#include <drm/drm_gem_framebuffer_helper.h> +#include <drm/drm_gem_vram_helper.h> +#include <drm/drm_managed.h> +#include <drm/drm_module.h> +#include <drm/drm_vblank.h> + +#include <drm/drm_probe_helper.h> + +#include "yhgch_drm_drv.h" +#include "yhgch_drm_regs.h" + +#define MEM_SIZE_RESERVE4KVM 0x200000 + +DEFINE_DRM_GEM_FOPS(yhgch_fops); + +int yhgch_dumb_create(struct drm_file *file, struct drm_device *dev, + struct drm_mode_create_dumb *args) +{ + return drm_gem_vram_fill_create_dumb(file, dev, 0, 16, args); +} + +static struct drm_driver yhgch_driver = { + .driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC, + .fops = &yhgch_fops, + .name = "yhgch", + .desc = "yhgch drm driver", + .major = 3, + .minor = 1, + .debugfs_init = drm_vram_mm_debugfs_init, + .dumb_create = yhgch_dumb_create, + .dumb_map_offset = drm_gem_ttm_dumb_map_offset, + DRM_FBDEV_TTM_DRIVER_OPS, +}; + +static int __maybe_unused yhgch_pm_suspend(struct device *dev) +{ + struct drm_device *drm_dev = dev_get_drvdata(dev); + + return drm_mode_config_helper_suspend(drm_dev); +} + +static int __maybe_unused yhgch_pm_resume(struct device *dev) +{ + struct drm_device *drm_dev = dev_get_drvdata(dev); + + return drm_mode_config_helper_resume(drm_dev); +} + +static const struct dev_pm_ops yhgch_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(yhgch_pm_suspend, + yhgch_pm_resume) +}; + +static const struct drm_mode_config_funcs yhgch_mode_funcs = { + .mode_valid = drm_vram_helper_mode_valid, + .atomic_check = drm_atomic_helper_check, + .atomic_commit = drm_atomic_helper_commit, + .fb_create = drm_gem_fb_create, +}; + +static int yhgch_kms_init(struct yhgch_drm_private *priv) +{ + struct drm_device *dev = &priv->dev; + int ret; + + ret = drmm_mode_config_init(dev); + if (ret) + return ret; + + priv->dev.mode_config.min_width = 0; + priv->dev.mode_config.min_height = 0; + priv->dev.mode_config.max_width = 1920; + priv->dev.mode_config.max_height = 1200; + dev->mode_config.preferred_depth = 24; + priv->dev.mode_config.prefer_shadow = 1; + priv->dev.mode_config.funcs = &yhgch_mode_funcs; + + ret = yhgch_de_init(priv); + if (ret) { + drm_err(dev, "failed to init de: %d\n", ret); + return ret; + } + + ret = yhgch_vdac_init(priv); + if (ret) { + drm_err(dev, "failed to init vdac: %d\n", ret); + return ret; + } + drm_kms_helper_poll_init(dev); + + return 0; +} + +/* + * It can operate in one of three modes: 0, 1 or Sleep. + */ +void yhgch_set_power_mode(struct yhgch_drm_private *priv, u32 power_mode) +{ + unsigned int control_value = 0; + void __iomem *mmio = priv->mmio; + u32 input = 1; + + if (power_mode > YHGCH_PW_MODE_CTL_MODE_SLEEP) + return; + + if (power_mode == YHGCH_PW_MODE_CTL_MODE_SLEEP) + input = 0; + + control_value = readl(mmio + YHGCH_POWER_MODE_CTRL); + control_value &= ~(YHGCH_PW_MODE_CTL_MODE_MASK | + YHGCH_PW_MODE_CTL_OSC_INPUT_MASK); + control_value |= YHGCH_FIELD(YHGCH_PW_MODE_CTL_MODE, power_mode); + control_value |= YHGCH_FIELD(YHGCH_PW_MODE_CTL_OSC_INPUT, input); + writel(control_value, mmio + YHGCH_POWER_MODE_CTRL); +} + +void yhgch_set_current_gate(struct yhgch_drm_private *priv, unsigned int gate) +{ + u32 gate_reg; + u32 mode; + void __iomem *mmio = priv->mmio; + + /* Get current power mode. */ + mode = (readl(mmio + YHGCH_POWER_MODE_CTRL) & + YHGCH_PW_MODE_CTL_MODE_MASK) >> YHGCH_PW_MODE_CTL_MODE_SHIFT; + + switch (mode) { + case YHGCH_PW_MODE_CTL_MODE_MODE0: + gate_reg = YHGCH_MODE0_GATE; + break; + + case YHGCH_PW_MODE_CTL_MODE_MODE1: + gate_reg = YHGCH_MODE1_GATE; + break; + + default: + gate_reg = YHGCH_MODE0_GATE; + break; + } + writel(gate, mmio + gate_reg); +} + +static void yhgch_hw_config(struct yhgch_drm_private *priv) +{ + u32 reg; + + /* On hardware reset, power mode 0 is default. */ + yhgch_set_power_mode(priv, YHGCH_PW_MODE_CTL_MODE_MODE0); + + /* Enable display power gate & LOCALMEM power gate */ + reg = readl(priv->mmio + YHGCH_CURRENT_GATE); + reg &= ~YHGCH_CURR_GATE_DISPLAY_MASK; + reg &= ~YHGCH_CURR_GATE_LOCALMEM_MASK; + reg |= YHGCH_CURR_GATE_DISPLAY(1); + reg |= YHGCH_CURR_GATE_LOCALMEM(1); + + yhgch_set_current_gate(priv, reg); + + /* + * Reset the memory controller. If the memory controller + * is not reset in chip,the system might hang when sw accesses + * the memory.The memory should be resetted after + * changing the MXCLK. + */ + reg = readl(priv->mmio + YHGCH_MISC_CTRL); + reg &= ~YHGCH_MSCCTL_LOCALMEM_RESET_MASK; + reg |= YHGCH_MSCCTL_LOCALMEM_RESET(0); + writel(reg, priv->mmio + YHGCH_MISC_CTRL); + + reg &= ~YHGCH_MSCCTL_LOCALMEM_RESET_MASK; + reg |= YHGCH_MSCCTL_LOCALMEM_RESET(1); + + writel(reg, priv->mmio + YHGCH_MISC_CTRL); +} + +static int yhgch_hw_map(struct yhgch_drm_private *priv) +{ + struct drm_device *dev = &priv->dev; + struct pci_dev *pdev = to_pci_dev(dev->dev); + resource_size_t ioaddr, iosize; + + ioaddr = pci_resource_start(pdev, 1); + iosize = pci_resource_len(pdev, 1); + priv->mmio = devm_ioremap(dev->dev, ioaddr, iosize); + if (!priv->mmio) { + drm_err(dev, "Cannot map mmio region\n"); + return -ENOMEM; + } + return 0; +} + +static int yhgch_hw_init(struct yhgch_drm_private *priv) +{ + int ret; + + ret = yhgch_hw_map(priv); + if (ret) + return ret; + yhgch_hw_config(priv); + return 0; +} + +static int yhgch_unload(struct drm_device *dev) +{ + drm_atomic_helper_shutdown(dev); + + pci_disable_msi(to_pci_dev(dev->dev)); + + return 0; +} + +static int yhgch_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct yhgch_drm_private *priv; + struct drm_device *dev; + int ret; + + ret = aperture_remove_conflicting_pci_devices(pdev, yhgch_driver.name); + + if (ret) + return ret; + + priv = devm_drm_dev_alloc(&pdev->dev, &yhgch_driver, + struct yhgch_drm_private, dev); + + if (IS_ERR(priv)) { + DRM_ERROR("failed to allocate drm_device\n"); + return PTR_ERR(priv); + } + + dev = &priv->dev; + pci_set_drvdata(pdev, dev); + + ret = pcim_enable_device(pdev); + if (ret) { + drm_err(dev, "failed to enable pci device: %d\n", ret); + goto err_return; + } + + ret = yhgch_hw_init(priv); + if (ret) + goto err_unload; + ret = drmm_vram_helper_init(dev, pci_resource_start(pdev, 0), + pci_resource_len(pdev, 0)); + if (ret) { + drm_err(dev, "Error initializing VRAM MM; %d\n", ret); + goto err_unload; + } + ret = yhgch_kms_init(priv); + if (ret) + goto err_unload; + + ret = pci_enable_msi(pdev); + if (ret) + drm_warn(dev, "enabling MSI failed: %d\n", ret); + /* reset all the states of crtc/plane/encoder/connector */ + drm_mode_config_reset(dev); + + ret = drm_dev_register(dev, 0); + if (ret) { + drm_err(dev, "failed to register drv for userspace access: %d\n", + ret); + goto err_unload; + } + drm_client_setup(dev, NULL); + + return 0; + +err_unload: + yhgch_unload(dev); + drm_err(dev, "failed to initialize drm driver: %d\n", ret); +err_return: + return ret; +} + +static void yhgch_pci_remove(struct pci_dev *pdev) +{ + struct drm_device *dev = pci_get_drvdata(pdev); + + drm_dev_unregister(dev); + yhgch_unload(dev); +} + +static void yhgch_pci_shutdown(struct pci_dev *pdev) +{ + drm_atomic_helper_shutdown(pci_get_drvdata(pdev)); +} + +static struct pci_device_id yhgch_pci_table[] = { + { 0x1bd4, 0x0750, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { 0, } +}; + +static struct pci_driver yhgch_pci_driver = { + .name = "yhgch-drm", + .id_table = yhgch_pci_table, + .probe = yhgch_pci_probe, + .remove = yhgch_pci_remove, + .shutdown = yhgch_pci_shutdown, + .driver.pm = &yhgch_pm_ops, +}; + +drm_module_pci_driver(yhgch_pci_driver); + +MODULE_DEVICE_TABLE(pci, yhgch_pci_table); +MODULE_AUTHOR(""); +MODULE_DESCRIPTION("DRM Driver for YhgchBMC"); +MODULE_LICENSE("GPL"); +MODULE_VERSION("3.1"); diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.h b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.h new file mode 100644 index 000000000000..2584ac10b2c5 --- /dev/null +++ b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.h @@ -0,0 +1,54 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef YHGCH_DRM_DRV_H +#define YHGCH_DRM_DRV_H + +#include <linux/gpio/consumer.h> +#include <linux/i2c-algo-bit.h> +#include <linux/i2c.h> +#include <linux/version.h> +#include <drm/drm_framebuffer.h> +#include <drm/drm_encoder.h> + +struct yhgch_connector { + struct drm_connector base; + struct i2c_adapter adapter; + struct i2c_algo_bit_data bit_data; +}; + +struct yhgch_drm_private { + /* hw */ + void __iomem *mmio; + + /* drm */ + struct drm_device dev; + struct drm_plane primary_plane; + struct drm_crtc crtc; + struct drm_encoder encoder; + struct yhgch_connector connector; +}; + +static inline struct yhgch_connector *to_yhgch_connector(struct drm_connector *connector) +{ + return container_of(connector, struct yhgch_connector, base); +} + +static inline struct yhgch_drm_private *to_yhgch_drm_private(struct drm_device *dev) +{ + return container_of(dev, struct yhgch_drm_private, dev); +} + +void yhgch_set_power_mode(struct yhgch_drm_private *priv, + u32 power_mode); +void yhgch_set_current_gate(struct yhgch_drm_private *priv, + u32 gate); + +int yhgch_de_init(struct yhgch_drm_private *priv); +int yhgch_vdac_init(struct yhgch_drm_private *priv); +int yhgch_mm_init(struct yhgch_drm_private *yhgch); +int yhgch_ddc_create(struct drm_device *drm_dev, struct yhgch_connector *connector); + +int yhgch_dumb_create(struct drm_file *file, struct drm_device *dev, + struct drm_mode_create_dumb *args); + +#endif diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_i2c.c b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_i2c.c new file mode 100644 index 000000000000..978226f120b7 --- /dev/null +++ b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_i2c.c @@ -0,0 +1,108 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include <linux/delay.h> +#include <linux/pci.h> + +#include <drm/drm_atomic_helper.h> +#include <drm/drm_probe_helper.h> + +#include <drm/drm_managed.h> + +#include "yhgch_drm_drv.h" + +#define GPIO_DATA 0x0802A0 +#define GPIO_DATA_DIRECTION 0x0802A4 + +#define I2C_SCL_MASK BIT(0) +#define I2C_SDA_MASK BIT(1) + +static void yhgch_set_i2c_signal(void *data, u32 mask, int value) +{ + struct yhgch_connector *yhgch_connector = data; + struct yhgch_drm_private *priv = to_yhgch_drm_private(yhgch_connector->base.dev); + u32 tmp_dir = readl(priv->mmio + GPIO_DATA_DIRECTION); + + if (value) { + tmp_dir &= ~mask; + writel(tmp_dir, priv->mmio + GPIO_DATA_DIRECTION); + } else { + u32 tmp_data = readl(priv->mmio + GPIO_DATA); + + tmp_data &= ~mask; + writel(tmp_data, priv->mmio + GPIO_DATA); + + tmp_dir |= mask; + writel(tmp_dir, priv->mmio + GPIO_DATA_DIRECTION); + } +} + +static int yhgch_get_i2c_signal(void *data, u32 mask) +{ + struct yhgch_connector *yhgch_connector = data; + struct yhgch_drm_private *priv = to_yhgch_drm_private(yhgch_connector->base.dev); + u32 tmp_dir = readl(priv->mmio + GPIO_DATA_DIRECTION); + + if ((tmp_dir & mask) != mask) { + tmp_dir &= ~mask; + writel(tmp_dir, priv->mmio + GPIO_DATA_DIRECTION); + } + + return (readl(priv->mmio + GPIO_DATA) & mask) ? 1 : 0; +} + +static void yhgch_ddc_setsda(void *data, int state) +{ + yhgch_set_i2c_signal(data, I2C_SDA_MASK, state); +} + +static void yhgch_ddc_setscl(void *data, int state) +{ + yhgch_set_i2c_signal(data, I2C_SCL_MASK, state); +} + +static int yhgch_ddc_getsda(void *data) +{ + return yhgch_get_i2c_signal(data, I2C_SDA_MASK); +} + +static int yhgch_ddc_getscl(void *data) +{ + return yhgch_get_i2c_signal(data, I2C_SCL_MASK); +} + +static void yhgch_ddc_release(struct drm_device *dev, void *res) +{ + struct yhgch_connector *yhgch_connector = res; + + i2c_del_adapter(&yhgch_connector->adapter); +} + +int yhgch_ddc_create(struct drm_device *drm_dev, + struct yhgch_connector *yhgch_connector) +{ + int ret = 0; + + yhgch_connector->adapter.owner = THIS_MODULE; + snprintf(yhgch_connector->adapter.name, I2C_NAME_SIZE, "INS i2c bit bus"); + yhgch_connector->adapter.dev.parent = drm_dev->dev; + i2c_set_adapdata(&yhgch_connector->adapter, yhgch_connector); + yhgch_connector->adapter.algo_data = &yhgch_connector->bit_data; + + yhgch_connector->bit_data.udelay = 20; + yhgch_connector->bit_data.timeout = usecs_to_jiffies(2000); + yhgch_connector->bit_data.data = yhgch_connector; + yhgch_connector->bit_data.setsda = yhgch_ddc_setsda; + yhgch_connector->bit_data.setscl = yhgch_ddc_setscl; + yhgch_connector->bit_data.getsda = yhgch_ddc_getsda; + yhgch_connector->bit_data.getscl = yhgch_ddc_getscl; + + ret = i2c_bit_add_bus(&yhgch_connector->adapter); + if (ret) + return ret; + + ret = drmm_add_action_or_reset(drm_dev, yhgch_ddc_release, yhgch_connector); + if (ret) + return ret; + + return ret; +} diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_regs.h b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_regs.h new file mode 100644 index 000000000000..d707f5186ab4 --- /dev/null +++ b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_regs.h @@ -0,0 +1,209 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef YHGCH_DRM_HW_H +#define YHGCH_DRM_HW_H + +/* register definition */ +#define YHGCH_MISC_CTRL 0x4 + +#define YHGCH_MSCCTL_LOCALMEM_RESET(x) ((x) << 6) +#define YHGCH_MSCCTL_LOCALMEM_RESET_MASK 0x40 + +#define YHGCH_CURRENT_GATE 0x000040 +#define YHGCH_CURR_GATE_DISPLAY(x) ((x) << 2) +#define YHGCH_CURR_GATE_DISPLAY_MASK 0x4 + +#define YHGCH_CURR_GATE_LOCALMEM(x) ((x) << 1) +#define YHGCH_CURR_GATE_LOCALMEM_MASK 0x2 + +#define YHGCH_MODE0_GATE 0x000044 +#define YHGCH_MODE1_GATE 0x000048 +#define YHGCH_POWER_MODE_CTRL 0x00004C + +#define YHGCH_PW_MODE_CTL_OSC_INPUT(x) ((x) << 3) +#define YHGCH_PW_MODE_CTL_OSC_INPUT_MASK 0x8 + +#define YHGCH_PW_MODE_CTL_MODE(x) ((x) << 0) +#define YHGCH_PW_MODE_CTL_MODE_MASK 0x03 +#define YHGCH_PW_MODE_CTL_MODE_SHIFT 0 + +#define YHGCH_PW_MODE_CTL_MODE_MODE0 0 +#define YHGCH_PW_MODE_CTL_MODE_MODE1 1 +#define YHGCH_PW_MODE_CTL_MODE_SLEEP 2 + +//#define YHGCH_CRT_PLL_CTRL 0x000060 + +#define YHGCH_PLL_CTRL_BYPASS(x) ((x) << 18) +#define YHGCH_PLL_CTRL_BYPASS_MASK 0x40000 + +#define YHGCH_PLL_CTRL_POWER(x) ((x) << 17) +#define YHGCH_PLL_CTRL_POWER_MASK 0x20000 + +#define YHGCH_PLL_CTRL_INPUT(x) ((x) << 16) +#define YHGCH_PLL_CTRL_INPUT_MASK 0x10000 + +#define YHGCH_PLL_CTRL_POD(x) ((x) << 14) +#define YHGCH_PLL_CTRL_POD_MASK 0xC000 + +#define YHGCH_PLL_CTRL_OD(x) ((x) << 12) +#define YHGCH_PLL_CTRL_OD_MASK 0x3000 + +#define YHGCH_PLL_CTRL_N(x) ((x) << 8) +#define YHGCH_PLL_CTRL_N_MASK 0xF00 + +#define YHGCH_PLL_CTRL_M(x) ((x) << 0) +#define YHGCH_PLL_CTRL_M_MASK 0xFF + +#define YHGCH_CRT_DISP_CTL 0x80200 + +#define YHGCH_CRT_DISP_CTL_DPMS(x) ((x) << 30) +#define YHGCH_CRT_DISP_CTL_DPMS_MASK 0xc0000000 + +#define YHGCH_CRT_DPMS_ON 0 +#define YHGCH_CRT_DPMS_OFF 3 + +#define YHGCH_CRT_DISP_CTL_CRTSELECT(x) ((x) << 25) +#define YHGCH_CRT_DISP_CTL_CRTSELECT_MASK 0x2000000 + +#define YHGCH_CRTSELECT_CRT 1 + +#define YHGCH_CRT_DISP_CTL_CLOCK_PHASE(x) ((x) << 14) +#define YHGCH_CRT_DISP_CTL_CLOCK_PHASE_MASK 0x4000 + +#define YHGCH_CRT_DISP_CTL_VSYNC_PHASE(x) ((x) << 13) +#define YHGCH_CRT_DISP_CTL_VSYNC_PHASE_MASK 0x2000 + +#define YHGCH_CRT_DISP_CTL_HSYNC_PHASE(x) ((x) << 12) +#define YHGCH_CRT_DISP_CTL_HSYNC_PHASE_MASK 0x1000 + +#define YHGCH_CRT_DISP_CTL_TIMING(x) ((x) << 8) +#define YHGCH_CRT_DISP_CTL_TIMING_MASK 0x100 + +#define YHGCH_CRT_DISP_CTL_PLANE(x) ((x) << 2) +#define YHGCH_CRT_DISP_CTL_PLANE_MASK 4 + +#define YHGCH_CRT_DISP_CTL_FORMAT(x) ((x) << 0) +#define YHGCH_CRT_DISP_CTL_FORMAT_MASK 0x03 + +#define YHGCH_CRT_FB_ADDRESS 0x080204 + +#define YHGCH_CRT_FB_WIDTH 0x080208 +#define YHGCH_CRT_FB_WIDTH_WIDTH(x) ((x) << 16) +#define YHGCH_CRT_FB_WIDTH_WIDTH_MASK 0x3FFF0000 +#define YHGCH_CRT_FB_WIDTH_OFFS(x) ((x) << 0) +#define YHGCH_CRT_FB_WIDTH_OFFS_MASK 0x3FFF + +#define YHGCH_CRT_HORZ_TOTAL 0x08020C +#define YHGCH_CRT_HORZ_TOTAL_TOTAL(x) ((x) << 16) +#define YHGCH_CRT_HORZ_TOTAL_TOTAL_MASK 0xFFF0000 + +#define YHGCH_CRT_HORZ_TOTAL_DISP_END(x) ((x) << 0) +#define YHGCH_CRT_HORZ_TOTAL_DISP_END_MASK 0xFFF + +#define YHGCH_CRT_HORZ_SYNC 0x080210 +#define YHGCH_CRT_HORZ_SYNC_WIDTH(x) ((x) << 16) +#define YHGCH_CRT_HORZ_SYNC_WIDTH_MASK 0xFF0000 + +#define YHGCH_CRT_HORZ_SYNC_START(x) ((x) << 0) +#define YHGCH_CRT_HORZ_SYNC_START_MASK 0xFFF + +#define YHGCH_CRT_VERT_TOTAL 0x080214 +#define YHGCH_CRT_VERT_TOTAL_TOTAL(x) ((x) << 16) +#define YHGCH_CRT_VERT_TOTAL_TOTAL_MASK 0x7FFF0000 + +#define YHGCH_CRT_VERT_TOTAL_DISP_END(x) ((x) << 0) +#define YHGCH_CRT_VERT_TOTAL_DISP_END_MASK 0x7FF + +#define YHGCH_CRT_VERT_SYNC 0x080218 +#define YHGCH_CRT_VERT_SYNC_HEIGHT(x) ((x) << 16) +#define YHGCH_CRT_VERT_SYNC_HEIGHT_MASK 0x3F0000 + +#define YHGCH_CRT_VERT_SYNC_START(x) ((x) << 0) +#define YHGCH_CRT_VERT_SYNC_START_MASK 0x7FF + +/* Hardware Cursor */ +#define YHGCH_HWC_ADDRESS 0x080230 +#define YHGCH_HWC_ADDRESS_ENABLE(x) ((x) << 31) +#define YHGCH_HWC_ADDRESS_ENABLE_MASK 0x80000000 +#define YHGCH_HWC_ADDRESS_ADDRESS(x) ((x) << 0) +#define YHGCH_HWC_ADDRESS_ADDRESS_MASK 0xFFFFFFF + +#define YHGCH_HWC_LOCATION 0x080234 +#define YHGCH_HWC_LOCATION_TOP(x) ((x) << 27) +#define YHGCH_HWC_LOCATION_TOP_MASK 0x8000000 +#define YHGCH_HWC_LOCATION_Y(x) ((x) << 16) +#define YHGCH_HWC_LOCATION_Y_MASK 0x7FF0000 +#define YHGCH_HWC_LOCATION_LEFT(x) ((x) << 11) +#define YHGCH_HWC_LOCATION_LEFT_MASK 0x800 +#define YHGCH_HWC_LOCATION_X(x) ((x) << 0) +#define YHGCH_HWC_LOCATION_X_MASK 0x7FF + +#define YHGCH_HWC_COLOR_12 0x080238 +#define YHGCH_HWC_COLOR_12_2_RGB(x) ((x) << 16) +#define YHGCH_HWC_COLOR_12_2_RGB_MASK 0xFFFF0000 +#define YHGCH_HWC_COLOR_12_1_RGB(x) ((x) << 0) +#define YHGCH_HWC_COLOR_12_1_RGB_MASK 0xFFFF + +#define YHGCH_HWC_COLOR_3 0x08023C +#define YHGCH_HWC_COLOR_3_RGB(x) ((x) << 0) +#define YHGCH_HWC_COLOR_3_RGB_MASK 0xFFFF + +/* Auto Centering */ +#define YHGCH_CRT_AUTO_CENTERING_TL 0x080280 +#define YHGCH_CRT_AUTO_CENTERING_TL_TOP(x) ((x) << 16) +#define YHGCH_CRT_AUTO_CENTERING_TL_TOP_MASK 0x7FF0000 + +#define YHGCH_CRT_AUTO_CENTERING_TL_LEFT(x) ((x) << 0) +#define YHGCH_CRT_AUTO_CENTERING_TL_LEFT_MASK 0x7FF + +#define YHGCH_CRT_AUTO_CENTERING_BR 0x080284 +#define YHGCH_CRT_AUTO_CENTERING_BR_BOTTOM(x) ((x) << 16) +#define YHGCH_CRT_AUTO_CENTERING_BR_BOTTOM_MASK 0x7FF0000 + +#define YHGCH_CRT_AUTO_CENTERING_BR_RIGHT(x) ((x) << 0) +#define YHGCH_CRT_AUTO_CENTERING_BR_RIGHT_MASK 0x7FF + +/* register to control panel output */ +#define YHGCH_DISPLAY_CONTROL_HISILE 0x80288 +#define YHGCH_DISPLAY_CONTROL_FPVDDEN(x) ((x) << 0) +#define YHGCH_DISPLAY_CONTROL_PANELDATE(x) ((x) << 1) +#define YHGCH_DISPLAY_CONTROL_FPEN(x) ((x) << 2) +#define YHGCH_DISPLAY_CONTROL_VBIASEN(x) ((x) << 3) + +#define YHGCH_RAW_INTERRUPT 0x80290 +#define YHGCH_RAW_INTERRUPT_VBLANK(x) ((x) << 2) +#define YHGCH_RAW_INTERRUPT_VBLANK_MASK 0x4 + +#define YHGCH_RAW_INTERRUPT_EN 0x80298 +#define YHGCH_RAW_INTERRUPT_EN_VBLANK(x) ((x) << 2) +#define YHGCH_RAW_INTERRUPT_EN_VBLANK_MASK 0x4 + +/* register and values for PLL control */ +#define CRT_PLL1_NS 0x802a8 +#define CRT_PLL1_NS_OUTER_BYPASS(x) ((x) << 30) +#define CRT_PLL1_NS_INTER_BYPASS(x) ((x) << 29) +#define CRT_PLL1_NS_POWERON(x) ((x) << 24) + +#define CRT_PLL1_NS_25MHZ 0x00006691 //640x480 +#define CRT_PLL1_NS_40MHZ 0x00004580 //800x600 +#define CRT_PLL1_NS_65MHZ 0x00002568 //1024x768 +#define CRT_PLL1_NS_83MHZ 0x000027bb //1280x800 +#define CRT_PLL1_NS_106MHZ 0x000027ef //1440x900 +#define CRT_PLL1_NS_108MHZ 0x000027f2 //1280x1024 +#define CRT_PLL1_NS_146MHZ 0x00001575 //1680x1050 +#define CRT_PLL1_NS_148MHZ 0x0000145f //1920x1080 +#define CRT_PLL1_NS_193MHZ 0x000018f7 //1920x1200 + +#define CRT_PLL2_NS 0x802ac +#define CRT_PLL2_NS_25MHZ 0x0 +#define CRT_PLL2_NS_40MHZ 0x0 +#define CRT_PLL2_NS_65MHZ 0x0 +#define CRT_PLL2_NS_83MHZ 0x0 +#define CRT_PLL2_NS_106MHZ 0x0 +#define CRT_PLL2_NS_108MHZ 0x0 +#define CRT_PLL2_NS_146MHZ 0x0 +#define CRT_PLL2_NS_148MHZ 0x0 +#define CRT_PLL2_NS_193MHZ 0x0 + +#define YHGCH_FIELD(field, value) (field(value) & field##_MASK) +#endif diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_vdac.c b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_vdac.c new file mode 100644 index 000000000000..5811a2608722 --- /dev/null +++ b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_vdac.c @@ -0,0 +1,110 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <linux/io.h> + +#include <drm/drm_atomic_helper.h> +#include <drm/drm_edid.h> +#include <drm/drm_probe_helper.h> +#include <drm/drm_print.h> +#include <drm/drm_simple_kms_helper.h> + +#include "yhgch_drm_drv.h" +#include "yhgch_drm_regs.h" + +static int yhgch_connector_get_modes(struct drm_connector *connector) +{ + int count; + void *edid; + struct yhgch_connector *yhgch_connector = to_yhgch_connector(connector); + + edid = drm_get_edid(connector, &yhgch_connector->adapter); + if (edid) { + drm_connector_update_edid_property(connector, edid); + count = drm_add_edid_modes(connector, edid); + if (count) + goto out; + } + + count = drm_add_modes_noedid(connector, + connector->dev->mode_config.max_width, + connector->dev->mode_config.max_height); + drm_set_preferred_mode(connector, 1024, 768); + +out: + kfree(edid); + return count; +} + +static const struct drm_connector_helper_funcs + yhgch_connector_helper_funcs = { + .get_modes = yhgch_connector_get_modes, + .detect_ctx = drm_connector_helper_detect_from_ddc, +}; + +static const struct drm_connector_funcs yhgch_connector_funcs = { + .fill_modes = drm_helper_probe_single_connector_modes, + .destroy = drm_connector_cleanup, + .reset = drm_atomic_helper_connector_reset, + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, +}; + +static void yhgch_encoder_mode_set(struct drm_encoder *encoder, + struct drm_display_mode *mode, + struct drm_display_mode *adj_mode) +{ + u32 reg; + struct drm_device *dev = encoder->dev; + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); + + reg = readl(priv->mmio + YHGCH_DISPLAY_CONTROL_HISILE); + reg |= YHGCH_DISPLAY_CONTROL_FPVDDEN(1); + reg |= YHGCH_DISPLAY_CONTROL_PANELDATE(1); + reg |= YHGCH_DISPLAY_CONTROL_FPEN(1); + reg |= YHGCH_DISPLAY_CONTROL_VBIASEN(1); + writel(reg, priv->mmio + YHGCH_DISPLAY_CONTROL_HISILE); +} + +static const struct drm_encoder_helper_funcs yhgch_encoder_helper_funcs = { + .mode_set = yhgch_encoder_mode_set, +}; + +int yhgch_vdac_init(struct yhgch_drm_private *priv) +{ + struct drm_device *dev = &priv->dev; + struct yhgch_connector *yhgch_connector = &priv->connector; + struct drm_encoder *encoder = &priv->encoder; + struct drm_crtc *crtc = &priv->crtc; + struct drm_connector *connector = &yhgch_connector->base; + int ret; + + ret = yhgch_ddc_create(dev, yhgch_connector); + if (ret) { + drm_err(dev, "failed to create ddc: %d\n", ret); + return ret; + } + + encoder->possible_crtcs = drm_crtc_mask(crtc); + ret = drm_simple_encoder_init(dev, encoder, DRM_MODE_ENCODER_DAC); + if (ret) { + drm_err(dev, "failed to init encoder: %d\n", ret); + return ret; + } + + drm_encoder_helper_add(encoder, &yhgch_encoder_helper_funcs); + + ret = drm_connector_init_with_ddc(dev, connector, + &yhgch_connector_funcs, + DRM_MODE_CONNECTOR_VGA, + &yhgch_connector->adapter); + if (ret) { + drm_err(dev, "failed to init connector: %d\n", ret); + return ret; + } + drm_connector_helper_add(connector, &yhgch_connector_helper_funcs); + connector->polled = DRM_CONNECTOR_POLL_CONNECT | DRM_CONNECTOR_POLL_DISCONNECT; + + drm_connector_attach_encoder(connector, encoder); + + return 0; +} -- 2.43.5 ^ permalink raw reply related [flat|nested] 22+ messages in thread
* Re: [PATCH v2 1/1] [DRIVER] gpu: drm: add support for Yhgc ZX1000 soc chipset 2025-09-03 5:45 ` [PATCH v2 1/1] " chuguangqing @ 2025-09-04 11:19 ` Thomas Zimmermann 2025-09-10 2:23 ` [PATCH v3 0/1] " Chu Guangqing 0 siblings, 1 reply; 22+ messages in thread From: Thomas Zimmermann @ 2025-09-04 11:19 UTC (permalink / raw) To: chuguangqing, maarten.lankhorst, mripard, airlied, simona Cc: linux-kernel, dri-devel Hi, see below for another review. Am 03.09.25 um 07:45 schrieb chuguangqing: > add support for Yhgc BMC soc chipset > > Signed-off-by: chuguangqing <chuguangqing@inspur.com> > --- > MAINTAINERS | 5 + > drivers/gpu/drm/Kconfig | 2 + > drivers/gpu/drm/Makefile | 1 + > drivers/gpu/drm/yhgch/Kconfig | 3 + > drivers/gpu/drm/yhgch/Makefile | 1 + > drivers/gpu/drm/yhgch/yhgch-drm/Kconfig | 12 + > drivers/gpu/drm/yhgch/yhgch-drm/Makefile | 5 + > .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_de.c | 428 ++++++++++++++++++ > .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.c | 324 +++++++++++++ > .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.h | 54 +++ > .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_i2c.c | 108 +++++ > .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_regs.h | 209 +++++++++ > .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_vdac.c | 110 +++++ > 13 files changed, 1262 insertions(+) > create mode 100644 drivers/gpu/drm/yhgch/Kconfig > create mode 100644 drivers/gpu/drm/yhgch/Makefile > create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/Kconfig > create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/Makefile > create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_de.c > create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.c > create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.h > create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_i2c.c > create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_regs.h > create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_vdac.c > > diff --git a/MAINTAINERS b/MAINTAINERS > index 10614ca41ed0..c79d9361fa81 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -27744,6 +27744,11 @@ S: Maintained > F: Documentation/input/devices/yealink.rst > F: drivers/input/misc/yealink.* > > +YHGC DRM DRIVER > +M: chuguangqing <chuguangqing@inspur.com> > +S: Maintained > +F: drivers/gpu/drm/yhgch > + > Z8530 DRIVER FOR AX.25 > M: Joerg Reuter <jreuter@yaina.de> > L: linux-hams@vger.kernel.org > diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig > index f7ea8e895c0c..8e0b1d12c81f 100644 > --- a/drivers/gpu/drm/Kconfig > +++ b/drivers/gpu/drm/Kconfig > @@ -396,6 +396,8 @@ source "drivers/gpu/drm/sprd/Kconfig" > > source "drivers/gpu/drm/imagination/Kconfig" > > +source "drivers/gpu/drm/yhgch/Kconfig" > + > config DRM_HYPERV > tristate "DRM Support for Hyper-V synthetic video device" > depends on DRM && PCI && HYPERV > diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile > index 4dafbdc8f86a..f344e0173b29 100644 > --- a/drivers/gpu/drm/Makefile > +++ b/drivers/gpu/drm/Makefile > @@ -231,6 +231,7 @@ obj-y += solomon/ > obj-$(CONFIG_DRM_SPRD) += sprd/ > obj-$(CONFIG_DRM_LOONGSON) += loongson/ > obj-$(CONFIG_DRM_POWERVR) += imagination/ > +obj-$(CONFIG_DRM_YHGCH) += yhgch/ > > # Ensure drm headers are self-contained and pass kernel-doc > hdrtest-files := \ > diff --git a/drivers/gpu/drm/yhgch/Kconfig b/drivers/gpu/drm/yhgch/Kconfig > new file mode 100644 > index 000000000000..4d2f473dbb4a > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/Kconfig > @@ -0,0 +1,3 @@ > +# License: GPL-2.0 > + > +source "drivers/gpu/drm/yhgch/yhgch-drm/Kconfig" > diff --git a/drivers/gpu/drm/yhgch/Makefile b/drivers/gpu/drm/yhgch/Makefile > new file mode 100644 > index 000000000000..c5229239002b > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/Makefile > @@ -0,0 +1 @@ > +obj-$(CONFIG_DRM_YHGCH) += yhgch-drm/ > diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/Kconfig b/drivers/gpu/drm/yhgch/yhgch-drm/Kconfig > new file mode 100644 > index 000000000000..10d586bbe897 > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/yhgch-drm/Kconfig > @@ -0,0 +1,12 @@ > +config DRM_YHGCH > + tristate "DRM Support for Yhgch BMC" > + depends on DRM && PCI && MMU > + select DRM_CLIENT_SELECTION > + select DRM_KMS_HELPER > + select DRM_VRAM_HELPER As I mentioned before, vram helpers are really deprecated. Please either internalize their code into your driver or use gem-shmem instead. > + select DRM_TTM_HELPER > + help > + Choose this option if you have a Yhgch soc chipset. > + If M is selected the module will be called yhgch - drm. > + IF Y is selected the module will be built into the kernel. > + IF N is selected the module will be excluded from the kernel. > diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/Makefile b/drivers/gpu/drm/yhgch/yhgch-drm/Makefile > new file mode 100644 > index 000000000000..e9cc4dc6568d > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/yhgch-drm/Makefile > @@ -0,0 +1,5 @@ > +yhgch-drm-y := yhgch_drm_drv.o yhgch_drm_de.o yhgch_drm_vdac.o yhgch_drm_i2c.o > + > +obj-$(CONFIG_DRM_YHGCH) += yhgch-drm.o > + > + > diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_de.c b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_de.c > new file mode 100644 > index 000000000000..a8463121190c > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_de.c > @@ -0,0 +1,428 @@ > +// SPDX-License-Identifier: GPL-2.0-or-later > + > +#include <linux/delay.h> > +#include <drm/drm_atomic.h> > +#include <drm/drm_atomic_helper.h> > +#include <drm/drm_fourcc.h> > + > +#include <drm/drm_gem_vram_helper.h> > +#include <drm/drm_vblank.h> > + > +#include "yhgch_drm_drv.h" > +#include "yhgch_drm_regs.h" > + > +struct yhgch_dislay_pll_config { > + u64 hdisplay; > + u64 vdisplay; > + u32 pll1_config_value; > + u32 pll2_config_value; > +}; > + > +static const struct yhgch_dislay_pll_config yhgch_pll_table[] = { > + { 640, 480, CRT_PLL1_NS_25MHZ, CRT_PLL2_NS_25MHZ }, > + { 800, 600, CRT_PLL1_NS_40MHZ, CRT_PLL2_NS_40MHZ }, > + { 1024, 768, CRT_PLL1_NS_65MHZ, CRT_PLL2_NS_65MHZ }, > + { 1280, 1024, CRT_PLL1_NS_108MHZ, CRT_PLL2_NS_108MHZ }, > + { 1920, 1080, CRT_PLL1_NS_148MHZ, CRT_PLL2_NS_148MHZ }, > +}; > + > +static int yhgch_plane_atomic_check(struct drm_plane *plane, > + struct drm_atomic_state *state) > +{ > + struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state, > + plane); > + struct drm_framebuffer *fb = new_plane_state->fb; > + struct drm_crtc_state *new_crtc_state = NULL; > + int ret; > + > + if (!fb) > + return 0; > + > + if (new_plane_state->crtc) > + new_crtc_state = drm_atomic_get_new_crtc_state(state, new_plane_state->crtc); > + > + if (new_plane_state->crtc_x + new_plane_state->crtc_w > > + new_crtc_state->adjusted_mode.hdisplay || > + new_plane_state->crtc_y + new_plane_state->crtc_h > > + new_crtc_state->adjusted_mode.vdisplay) { > + drm_dbg_atomic(plane->dev, "visible portion of plane is invalid\n"); > + return -EINVAL; > + } > + > + if (new_plane_state->fb->pitches[0] % 16 != 0) { > + drm_dbg_atomic(plane->dev, "wrong stride with 16-byte aligned\n"); > + return -EINVAL; > + } > + > + ret = drm_atomic_helper_check_plane_state(new_plane_state, new_crtc_state, > + DRM_PLANE_NO_SCALING, > + DRM_PLANE_NO_SCALING, > + false, true); > + if (ret) { > + return ret; > + } else if (!new_plane_state->visible) { > + if (drm_WARN_ON(plane->dev, new_plane_state->crtc)) /* cannot legally happen */ > + return -EINVAL; > + else > + return 0; > + } You need to do this code block before anything else. Please also drop the warn-on branch. > + return 0; > +} > + > +static void yhgch_plane_atomic_update(struct drm_plane *plane, > + struct drm_atomic_state *state) > +{ > + struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state, > + plane); > + u32 reg; > + s64 gpu_addr = 0; > + u32 line_l; > + struct yhgch_drm_private *priv = to_yhgch_drm_private(plane->dev); > + struct drm_gem_vram_object *gbo; > + > + if (!new_state->fb) > + return; > + > + gbo = drm_gem_vram_of_gem(new_state->fb->obj[0]); > + > + gpu_addr = drm_gem_vram_offset(gbo); > + if (gpu_addr < 0) > + return; > + > + writel(gpu_addr, priv->mmio + YHGCH_CRT_FB_ADDRESS); > + > + reg = new_state->fb->width * (new_state->fb->format->cpp[0]); > + > + line_l = new_state->fb->pitches[0]; > + writel(YHGCH_FIELD(YHGCH_CRT_FB_WIDTH_WIDTH, reg) | > + YHGCH_FIELD(YHGCH_CRT_FB_WIDTH_OFFS, line_l), > + priv->mmio + YHGCH_CRT_FB_WIDTH); > + > + /* SET PIXEL FORMAT */ > + reg = readl(priv->mmio + YHGCH_CRT_DISP_CTL); > + reg &= ~YHGCH_CRT_DISP_CTL_FORMAT_MASK; > + reg |= YHGCH_FIELD(YHGCH_CRT_DISP_CTL_FORMAT, > + new_state->fb->format->cpp[0] * 8 / 16); > + writel(reg, priv->mmio + YHGCH_CRT_DISP_CTL); > +} > + > +static const u32 channel_formats1[] = { > + DRM_FORMAT_RGB565, DRM_FORMAT_RGB888, > + DRM_FORMAT_XRGB8888, DRM_FORMAT_RGBA8888, DRM_FORMAT_ARGB8888 Preferably just one format per line. In my earlier review, I asked about support for alpha channels and how it is being programmed into hardware. Please address these questions. > +}; > + > +static struct drm_plane_funcs yhgch_plane_funcs = { > + .update_plane = drm_atomic_helper_update_plane, > + .disable_plane = drm_atomic_helper_disable_plane, > + .destroy = drm_plane_cleanup, > + .reset = drm_atomic_helper_plane_reset, > + .atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state, > + .atomic_destroy_state = drm_atomic_helper_plane_destroy_state, > +}; > + > +static const struct drm_plane_helper_funcs yhgch_plane_helper_funcs = { > + DRM_GEM_VRAM_PLANE_HELPER_FUNCS, > + .atomic_check = yhgch_plane_atomic_check, > + .atomic_update = yhgch_plane_atomic_update, > +}; > + > +static void yhgch_crtc_dpms(struct drm_crtc *crtc, u32 dpms) > +{ > + struct yhgch_drm_private *priv = to_yhgch_drm_private(crtc->dev); > + u32 reg; > + > + reg = readl(priv->mmio + YHGCH_CRT_DISP_CTL); > + reg &= ~YHGCH_CRT_DISP_CTL_DPMS_MASK; > + reg |= YHGCH_FIELD(YHGCH_CRT_DISP_CTL_DPMS, dpms); > + reg &= ~YHGCH_CRT_DISP_CTL_TIMING_MASK; > + if (dpms == YHGCH_CRT_DPMS_ON) > + reg |= YHGCH_CRT_DISP_CTL_TIMING(1); > + writel(reg, priv->mmio + YHGCH_CRT_DISP_CTL); > +} > + > +static void yhgch_crtc_atomic_enable(struct drm_crtc *crtc, > + struct drm_atomic_state *old_state) > +{ > + u32 reg; > + struct yhgch_drm_private *priv = to_yhgch_drm_private(crtc->dev); > + > + yhgch_set_power_mode(priv, YHGCH_PW_MODE_CTL_MODE_MODE0); > + > + /* Enable display power gate & LOCALMEM power gate */ > + reg = readl(priv->mmio + YHGCH_CURRENT_GATE); > + reg &= ~YHGCH_CURR_GATE_LOCALMEM_MASK; > + reg &= ~YHGCH_CURR_GATE_DISPLAY_MASK; > + reg |= YHGCH_CURR_GATE_LOCALMEM(1); > + reg |= YHGCH_CURR_GATE_DISPLAY(1); > + yhgch_set_current_gate(priv, reg); > + yhgch_crtc_dpms(crtc, YHGCH_CRT_DPMS_ON); > +} > + > +static void yhgch_crtc_atomic_disable(struct drm_crtc *crtc, > + struct drm_atomic_state *old_state) > +{ > + u32 reg; > + struct yhgch_drm_private *priv = to_yhgch_drm_private(crtc->dev); > + > + yhgch_crtc_dpms(crtc, YHGCH_CRT_DPMS_OFF); > + > + yhgch_set_power_mode(priv, YHGCH_PW_MODE_CTL_MODE_SLEEP); > + > + /* Enable display power gate & LOCALMEM power gate */ > + reg = readl(priv->mmio + YHGCH_CURRENT_GATE); > + reg &= ~YHGCH_CURR_GATE_LOCALMEM_MASK; > + reg &= ~YHGCH_CURR_GATE_DISPLAY_MASK; > + reg |= YHGCH_CURR_GATE_LOCALMEM(0); > + reg |= YHGCH_CURR_GATE_DISPLAY(0); > + yhgch_set_current_gate(priv, reg); > +} > + > +static enum drm_mode_status > +yhgch_crtc_mode_valid(struct drm_crtc *crtc, > + const struct drm_display_mode *mode) > +{ > + size_t i = 0; > + int vrefresh = drm_mode_vrefresh(mode); > + > + if (vrefresh < 59 || vrefresh > 61) > + return MODE_NOCLOCK; > + > + for (i = 0; i < ARRAY_SIZE(yhgch_pll_table); i++) { > + if (yhgch_pll_table[i].hdisplay == mode->hdisplay && > + yhgch_pll_table[i].vdisplay == mode->vdisplay) > + return MODE_OK; > + } > + > + return MODE_BAD; > +} > + > +static void set_vclock_yhgch(struct drm_device *dev, u64 pll) > +{ > + u32 val; > + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); > + > + val = readl(priv->mmio + CRT_PLL1_NS); > + val &= ~(CRT_PLL1_NS_OUTER_BYPASS(1)); > + writel(val, priv->mmio + CRT_PLL1_NS); > + > + val = CRT_PLL1_NS_INTER_BYPASS(1) | CRT_PLL1_NS_POWERON(1); > + writel(val, priv->mmio + CRT_PLL1_NS); > + > + writel(pll, priv->mmio + CRT_PLL1_NS); > + > + usleep_range(1000, 2000); > + > + val = pll & ~(CRT_PLL1_NS_POWERON(1)); > + writel(val, priv->mmio + CRT_PLL1_NS); > + > + usleep_range(1000, 2000); > + > + val &= ~(CRT_PLL1_NS_INTER_BYPASS(1)); > + writel(val, priv->mmio + CRT_PLL1_NS); > + > + usleep_range(1000, 2000); > + > + val |= CRT_PLL1_NS_OUTER_BYPASS(1); > + writel(val, priv->mmio + CRT_PLL1_NS); > +} > + > +static void get_pll_config(u64 x, u64 y, u32 *pll1, u32 *pll2) > +{ > + size_t i; > + size_t count = ARRAY_SIZE(yhgch_pll_table); > + > + for (i = 0; i < count; i++) { > + if (yhgch_pll_table[i].hdisplay == x && > + yhgch_pll_table[i].vdisplay == y) { > + *pll1 = yhgch_pll_table[i].pll1_config_value; > + *pll2 = yhgch_pll_table[i].pll2_config_value; > + return; > + } > + } > + > + /* if found none, we use default value */ > + *pll1 = CRT_PLL1_NS_25MHZ; > + *pll2 = CRT_PLL2_NS_25MHZ; > +} > + > +/* > + * This function takes care the extra registers and bit fields required to > + * setup a mode in board. > + * Explanation about Display Control register: > + * FPGA only supports 7 predefined pixel clocks, and clock select is > + * in bit 4:0 of new register 0x802a8. > + */ > +static u32 display_ctrl_adjust(struct drm_device *dev, > + struct drm_display_mode *mode, > + u32 ctrl) > +{ > + u64 w, h; > + u32 pll1; /* bit[31:0] of PLL */ > + u32 pll2; /* bit[63:32] of PLL */ > + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); > + > + w = mode->hdisplay; > + h = mode->vdisplay; > + > + get_pll_config(w, h, &pll1, &pll2); > + writel(pll2, priv->mmio + CRT_PLL2_NS); > + set_vclock_yhgch(dev, pll1); > + > + /* > + * yhgch has to set up the top-left and bottom-right > + * registers as well. > + * Note that normal chip only use those two register for > + * auto-centering mode. > + */ > + writel(YHGCH_FIELD(YHGCH_CRT_AUTO_CENTERING_TL_TOP, 0) | > + YHGCH_FIELD(YHGCH_CRT_AUTO_CENTERING_TL_LEFT, 0), > + priv->mmio + YHGCH_CRT_AUTO_CENTERING_TL); > + > + writel(YHGCH_FIELD(YHGCH_CRT_AUTO_CENTERING_BR_BOTTOM, h - 1) | > + YHGCH_FIELD(YHGCH_CRT_AUTO_CENTERING_BR_RIGHT, w - 1), > + priv->mmio + YHGCH_CRT_AUTO_CENTERING_BR); > + > + /* > + * Assume common fields in ctrl have been properly set before > + * calling this function. > + * This function only sets the extra fields in ctrl. > + */ > + > + /* Set bit 25 of display controller: Select CRT or VGA clock */ > + ctrl &= ~YHGCH_CRT_DISP_CTL_CRTSELECT_MASK; > + ctrl &= ~YHGCH_CRT_DISP_CTL_CLOCK_PHASE_MASK; > + > + ctrl |= YHGCH_CRT_DISP_CTL_CRTSELECT(YHGCH_CRTSELECT_CRT); > + > + /* clock_phase_polarity is 0 */ > + ctrl |= YHGCH_CRT_DISP_CTL_CLOCK_PHASE(0); > + ctrl |= YHGCH_FIELD(YHGCH_CRT_DISP_CTL_FORMAT, 2); > + > + writel(ctrl, priv->mmio + YHGCH_CRT_DISP_CTL); > + > + return ctrl; > +} > + > +static void yhgch_crtc_mode_set_nofb(struct drm_crtc *crtc) > +{ > + u32 val; > + struct drm_display_mode *mode = &crtc->state->mode; > + struct drm_device *dev = crtc->dev; > + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); > + u32 width = mode->hsync_end - mode->hsync_start; > + u32 height = mode->vsync_end - mode->vsync_start; > + > + //writel(format_pll_reg(), priv->mmio + YHGCH_CRT_PLL_CTRL); > + writel(YHGCH_FIELD(YHGCH_CRT_HORZ_TOTAL_TOTAL, mode->htotal - 1) | > + YHGCH_FIELD(YHGCH_CRT_HORZ_TOTAL_DISP_END, mode->hdisplay - 1), > + priv->mmio + YHGCH_CRT_HORZ_TOTAL); > + > + writel(YHGCH_FIELD(YHGCH_CRT_HORZ_SYNC_WIDTH, width) | > + YHGCH_FIELD(YHGCH_CRT_HORZ_SYNC_START, mode->hsync_start - 1), > + priv->mmio + YHGCH_CRT_HORZ_SYNC); > + > + writel(YHGCH_FIELD(YHGCH_CRT_VERT_TOTAL_TOTAL, mode->vtotal - 1) | > + YHGCH_FIELD(YHGCH_CRT_VERT_TOTAL_DISP_END, mode->vdisplay - 1), > + priv->mmio + YHGCH_CRT_VERT_TOTAL); > + > + writel(YHGCH_FIELD(YHGCH_CRT_VERT_SYNC_HEIGHT, height) | > + YHGCH_FIELD(YHGCH_CRT_VERT_SYNC_START, mode->vsync_start - 1), > + priv->mmio + YHGCH_CRT_VERT_SYNC); > + > + val = YHGCH_FIELD(YHGCH_CRT_DISP_CTL_VSYNC_PHASE, 0); > + val |= YHGCH_FIELD(YHGCH_CRT_DISP_CTL_HSYNC_PHASE, 0); > + val |= YHGCH_CRT_DISP_CTL_TIMING(1); > + val |= YHGCH_CRT_DISP_CTL_PLANE(1); > + > + display_ctrl_adjust(dev, mode, val); > +} > + > +static void yhgch_crtc_atomic_begin(struct drm_crtc *crtc, > + struct drm_atomic_state *old_state) > +{ > + u32 reg; > + struct drm_device *dev = crtc->dev; > + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); > + > + yhgch_set_power_mode(priv, YHGCH_PW_MODE_CTL_MODE_MODE0); > + > + /* Enable display power gate & LOCALMEM power gate */ > + reg = readl(priv->mmio + YHGCH_CURRENT_GATE); > + reg &= ~YHGCH_CURR_GATE_DISPLAY_MASK; > + reg &= ~YHGCH_CURR_GATE_LOCALMEM_MASK; > + reg |= YHGCH_CURR_GATE_DISPLAY(1); > + reg |= YHGCH_CURR_GATE_LOCALMEM(1); > + yhgch_set_current_gate(priv, reg); > + > + /* We can add more initialization as needed. */ > +} > + > +static void yhgch_crtc_atomic_flush(struct drm_crtc *crtc, > + struct drm_atomic_state *state) > + > +{ > + unsigned long flags; > + > + spin_lock_irqsave(&crtc->dev->event_lock, flags); > + if (crtc->state->event) > + drm_crtc_send_vblank_event(crtc, crtc->state->event); > + crtc->state->event = NULL; > + spin_unlock_irqrestore(&crtc->dev->event_lock, flags); > +} Please drop the atomic-flush helper for now. As your driver doesn't implement vblank interrupts yet, the DRM framework will send out the vblank events automatically. When you add support for vblank interrupts in a later patch, you can still add the flush helper. > + > +static const struct drm_crtc_funcs yhgch_crtc_funcs = { > + .page_flip = drm_atomic_helper_page_flip, > + .set_config = drm_atomic_helper_set_config, > + .destroy = drm_crtc_cleanup, > + .reset = drm_atomic_helper_crtc_reset, > + .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state, > + .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state, > + > +}; > + > +static const struct drm_crtc_helper_funcs yhgch_crtc_helper_funcs = { > + .mode_set_nofb = yhgch_crtc_mode_set_nofb, > + .atomic_begin = yhgch_crtc_atomic_begin, > + .atomic_flush = yhgch_crtc_atomic_flush, > + .atomic_enable = yhgch_crtc_atomic_enable, > + .atomic_disable = yhgch_crtc_atomic_disable, > + .mode_valid = yhgch_crtc_mode_valid, > +}; > + > +int yhgch_de_init(struct yhgch_drm_private *priv) > +{ > + struct drm_device *dev = &priv->dev; > + struct drm_crtc *crtc = &priv->crtc; > + struct drm_plane *plane = &priv->primary_plane; > + int ret; > + > + ret = drm_universal_plane_init(dev, plane, 1, &yhgch_plane_funcs, > + channel_formats1, > + ARRAY_SIZE(channel_formats1), > + NULL, > + DRM_PLANE_TYPE_PRIMARY, > + NULL); > + No empty line here, please. > + if (ret) { > + drm_err(dev, "failed to init plane: %d\n", ret); > + return ret; > + } > + > + drm_plane_helper_add(plane, &yhgch_plane_helper_funcs); > + > + ret = drm_crtc_init_with_planes(dev, crtc, plane, > + NULL, &yhgch_crtc_funcs, NULL); > + if (ret) { > + drm_err(dev, "failed to init crtc: %d\n", ret); > + return ret; > + } > + > + ret = drm_mode_crtc_set_gamma_size(crtc, 256); > + if (ret) { > + drm_err(dev, "failed to set gamma size: %d\n", ret); > + return ret; > + } The driver does not appear to be using gamma tables anywhere. Please don't set this property then. > + drm_crtc_helper_add(crtc, &yhgch_crtc_helper_funcs); > + > + return 0; > +} > diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.c b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.c > new file mode 100644 > index 000000000000..32a3126c5436 > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.c > @@ -0,0 +1,324 @@ > +// SPDX-License-Identifier: GPL-2.0 > + > +#include "yhgch_drm_drv.h" > + > +#include <linux/module.h> > +#include <linux/pci.h> > + > +#include <linux/aperture.h> > +#include <drm/clients/drm_client_setup.h> > + > +#include <drm/drm_atomic_helper.h> > +#include <drm/drm_drv.h> > +#include <drm/drm_fbdev_ttm.h> > + > +#include <drm/drm_gem_framebuffer_helper.h> > +#include <drm/drm_gem_vram_helper.h> > +#include <drm/drm_managed.h> > +#include <drm/drm_module.h> > +#include <drm/drm_vblank.h> > + > +#include <drm/drm_probe_helper.h> > + > +#include "yhgch_drm_drv.h" > +#include "yhgch_drm_regs.h" > + > +#define MEM_SIZE_RESERVE4KVM 0x200000 > + > +DEFINE_DRM_GEM_FOPS(yhgch_fops); > + > +int yhgch_dumb_create(struct drm_file *file, struct drm_device *dev, > + struct drm_mode_create_dumb *args) > +{ > + return drm_gem_vram_fill_create_dumb(file, dev, 0, 16, args); > +} > + > +static struct drm_driver yhgch_driver = { > + .driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC, > + .fops = &yhgch_fops, > + .name = "yhgch", > + .desc = "yhgch drm driver", > + .major = 3, > + .minor = 1, > + .debugfs_init = drm_vram_mm_debugfs_init, > + .dumb_create = yhgch_dumb_create, > + .dumb_map_offset = drm_gem_ttm_dumb_map_offset, > + DRM_FBDEV_TTM_DRIVER_OPS, > +}; > + > +static int __maybe_unused yhgch_pm_suspend(struct device *dev) > +{ > + struct drm_device *drm_dev = dev_get_drvdata(dev); > + > + return drm_mode_config_helper_suspend(drm_dev); > +} > + > +static int __maybe_unused yhgch_pm_resume(struct device *dev) > +{ > + struct drm_device *drm_dev = dev_get_drvdata(dev); > + > + return drm_mode_config_helper_resume(drm_dev); > +} > + > +static const struct dev_pm_ops yhgch_pm_ops = { > + SET_SYSTEM_SLEEP_PM_OPS(yhgch_pm_suspend, > + yhgch_pm_resume) > +}; > + > +static const struct drm_mode_config_funcs yhgch_mode_funcs = { > + .mode_valid = drm_vram_helper_mode_valid, > + .atomic_check = drm_atomic_helper_check, > + .atomic_commit = drm_atomic_helper_commit, > + .fb_create = drm_gem_fb_create, > +}; > + > +static int yhgch_kms_init(struct yhgch_drm_private *priv) > +{ > + struct drm_device *dev = &priv->dev; > + int ret; > + > + ret = drmm_mode_config_init(dev); > + if (ret) > + return ret; > + > + priv->dev.mode_config.min_width = 0; > + priv->dev.mode_config.min_height = 0; > + priv->dev.mode_config.max_width = 1920; > + priv->dev.mode_config.max_height = 1200; > + dev->mode_config.preferred_depth = 24; > + priv->dev.mode_config.prefer_shadow = 1; > + priv->dev.mode_config.funcs = &yhgch_mode_funcs; > + > + ret = yhgch_de_init(priv); > + if (ret) { > + drm_err(dev, "failed to init de: %d\n", ret); > + return ret; > + } > + > + ret = yhgch_vdac_init(priv); > + if (ret) { > + drm_err(dev, "failed to init vdac: %d\n", ret); > + return ret; > + } > + drm_kms_helper_poll_init(dev); > + > + return 0; > +} > + > +/* > + * It can operate in one of three modes: 0, 1 or Sleep. > + */ > +void yhgch_set_power_mode(struct yhgch_drm_private *priv, u32 power_mode) > +{ > + unsigned int control_value = 0; > + void __iomem *mmio = priv->mmio; > + u32 input = 1; > + > + if (power_mode > YHGCH_PW_MODE_CTL_MODE_SLEEP) > + return; > + > + if (power_mode == YHGCH_PW_MODE_CTL_MODE_SLEEP) > + input = 0; > + > + control_value = readl(mmio + YHGCH_POWER_MODE_CTRL); > + control_value &= ~(YHGCH_PW_MODE_CTL_MODE_MASK | > + YHGCH_PW_MODE_CTL_OSC_INPUT_MASK); > + control_value |= YHGCH_FIELD(YHGCH_PW_MODE_CTL_MODE, power_mode); > + control_value |= YHGCH_FIELD(YHGCH_PW_MODE_CTL_OSC_INPUT, input); > + writel(control_value, mmio + YHGCH_POWER_MODE_CTRL); > +} > + > +void yhgch_set_current_gate(struct yhgch_drm_private *priv, unsigned int gate) > +{ > + u32 gate_reg; > + u32 mode; > + void __iomem *mmio = priv->mmio; > + > + /* Get current power mode. */ > + mode = (readl(mmio + YHGCH_POWER_MODE_CTRL) & > + YHGCH_PW_MODE_CTL_MODE_MASK) >> YHGCH_PW_MODE_CTL_MODE_SHIFT; > + > + switch (mode) { > + case YHGCH_PW_MODE_CTL_MODE_MODE0: > + gate_reg = YHGCH_MODE0_GATE; > + break; > + > + case YHGCH_PW_MODE_CTL_MODE_MODE1: > + gate_reg = YHGCH_MODE1_GATE; > + break; > + > + default: > + gate_reg = YHGCH_MODE0_GATE; > + break; > + } > + writel(gate, mmio + gate_reg); > +} > + > +static void yhgch_hw_config(struct yhgch_drm_private *priv) > +{ > + u32 reg; > + > + /* On hardware reset, power mode 0 is default. */ > + yhgch_set_power_mode(priv, YHGCH_PW_MODE_CTL_MODE_MODE0); > + > + /* Enable display power gate & LOCALMEM power gate */ > + reg = readl(priv->mmio + YHGCH_CURRENT_GATE); > + reg &= ~YHGCH_CURR_GATE_DISPLAY_MASK; > + reg &= ~YHGCH_CURR_GATE_LOCALMEM_MASK; > + reg |= YHGCH_CURR_GATE_DISPLAY(1); > + reg |= YHGCH_CURR_GATE_LOCALMEM(1); > + > + yhgch_set_current_gate(priv, reg); > + > + /* > + * Reset the memory controller. If the memory controller > + * is not reset in chip,the system might hang when sw accesses > + * the memory.The memory should be resetted after > + * changing the MXCLK. > + */ > + reg = readl(priv->mmio + YHGCH_MISC_CTRL); > + reg &= ~YHGCH_MSCCTL_LOCALMEM_RESET_MASK; > + reg |= YHGCH_MSCCTL_LOCALMEM_RESET(0); > + writel(reg, priv->mmio + YHGCH_MISC_CTRL); > + > + reg &= ~YHGCH_MSCCTL_LOCALMEM_RESET_MASK; > + reg |= YHGCH_MSCCTL_LOCALMEM_RESET(1); > + > + writel(reg, priv->mmio + YHGCH_MISC_CTRL); > +} > + > +static int yhgch_hw_map(struct yhgch_drm_private *priv) > +{ > + struct drm_device *dev = &priv->dev; > + struct pci_dev *pdev = to_pci_dev(dev->dev); > + resource_size_t ioaddr, iosize; > + > + ioaddr = pci_resource_start(pdev, 1); > + iosize = pci_resource_len(pdev, 1); > + priv->mmio = devm_ioremap(dev->dev, ioaddr, iosize); > + if (!priv->mmio) { > + drm_err(dev, "Cannot map mmio region\n"); > + return -ENOMEM; > + } > + return 0; > +} > + > +static int yhgch_hw_init(struct yhgch_drm_private *priv) > +{ > + int ret; > + > + ret = yhgch_hw_map(priv); > + if (ret) > + return ret; > + yhgch_hw_config(priv); > + return 0; > +} > + > +static int yhgch_unload(struct drm_device *dev) > +{ > + drm_atomic_helper_shutdown(dev); > + > + pci_disable_msi(to_pci_dev(dev->dev)); > + > + return 0; > +} What's the reason for not using managed clean-up code? > + > +static int yhgch_pci_probe(struct pci_dev *pdev, > + const struct pci_device_id *ent) > +{ > + struct yhgch_drm_private *priv; > + struct drm_device *dev; > + int ret; > + > + ret = aperture_remove_conflicting_pci_devices(pdev, yhgch_driver.name); > + > + if (ret) > + return ret; > + > + priv = devm_drm_dev_alloc(&pdev->dev, &yhgch_driver, > + struct yhgch_drm_private, dev); > + > + if (IS_ERR(priv)) { > + DRM_ERROR("failed to allocate drm_device\n"); No error message here, please. IIRC there's already an internal error message when allocation fails. > + return PTR_ERR(priv); > + } > + > + dev = &priv->dev; > + pci_set_drvdata(pdev, dev); > + > + ret = pcim_enable_device(pdev); > + if (ret) { > + drm_err(dev, "failed to enable pci device: %d\n", ret); > + goto err_return; > + } > + > + ret = yhgch_hw_init(priv); > + if (ret) > + goto err_unload; > + ret = drmm_vram_helper_init(dev, pci_resource_start(pdev, 0), > + pci_resource_len(pdev, 0)); > + if (ret) { > + drm_err(dev, "Error initializing VRAM MM; %d\n", ret); > + goto err_unload; > + } > + ret = yhgch_kms_init(priv); > + if (ret) > + goto err_unload; > + > + ret = pci_enable_msi(pdev); > + if (ret) > + drm_warn(dev, "enabling MSI failed: %d\n", ret); > + /* reset all the states of crtc/plane/encoder/connector */ > + drm_mode_config_reset(dev); > + > + ret = drm_dev_register(dev, 0); > + if (ret) { > + drm_err(dev, "failed to register drv for userspace access: %d\n", > + ret); > + goto err_unload; > + } > + drm_client_setup(dev, NULL); > + > + return 0; > + > +err_unload: > + yhgch_unload(dev); > + drm_err(dev, "failed to initialize drm driver: %d\n", ret); No such generic error messages. Either warn where the error happens, or print nothing. > +err_return: > + return ret; > +} > + > +static void yhgch_pci_remove(struct pci_dev *pdev) > +{ > + struct drm_device *dev = pci_get_drvdata(pdev); > + > + drm_dev_unregister(dev); > + yhgch_unload(dev); > +} > + > +static void yhgch_pci_shutdown(struct pci_dev *pdev) > +{ > + drm_atomic_helper_shutdown(pci_get_drvdata(pdev)); > +} > + > +static struct pci_device_id yhgch_pci_table[] = { > + { 0x1bd4, 0x0750, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, > + { 0, } > +}; > + > +static struct pci_driver yhgch_pci_driver = { > + .name = "yhgch-drm", > + .id_table = yhgch_pci_table, > + .probe = yhgch_pci_probe, > + .remove = yhgch_pci_remove, > + .shutdown = yhgch_pci_shutdown, > + .driver.pm = &yhgch_pm_ops, > +}; > + > +drm_module_pci_driver(yhgch_pci_driver); > + > +MODULE_DEVICE_TABLE(pci, yhgch_pci_table); > +MODULE_AUTHOR(""); > +MODULE_DESCRIPTION("DRM Driver for YhgchBMC"); > +MODULE_LICENSE("GPL"); > +MODULE_VERSION("3.1"); > diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.h b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.h > new file mode 100644 > index 000000000000..2584ac10b2c5 > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.h > @@ -0,0 +1,54 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > + > +#ifndef YHGCH_DRM_DRV_H > +#define YHGCH_DRM_DRV_H > + > +#include <linux/gpio/consumer.h> > +#include <linux/i2c-algo-bit.h> > +#include <linux/i2c.h> > +#include <linux/version.h> > +#include <drm/drm_framebuffer.h> > +#include <drm/drm_encoder.h> > + > +struct yhgch_connector { > + struct drm_connector base; > + struct i2c_adapter adapter; > + struct i2c_algo_bit_data bit_data; > +}; I mentioned the ddc code in mgag200, which works without a new connector struct and handles the i2c internally. Why didn't you adapt it to your driver? > + > +struct yhgch_drm_private { > + /* hw */ > + void __iomem *mmio; > + > + /* drm */ > + struct drm_device dev; > + struct drm_plane primary_plane; > + struct drm_crtc crtc; > + struct drm_encoder encoder; > + struct yhgch_connector connector; > +}; > + > +static inline struct yhgch_connector *to_yhgch_connector(struct drm_connector *connector) > +{ > + return container_of(connector, struct yhgch_connector, base); > +} > + > +static inline struct yhgch_drm_private *to_yhgch_drm_private(struct drm_device *dev) > +{ > + return container_of(dev, struct yhgch_drm_private, dev); > +} > + > +void yhgch_set_power_mode(struct yhgch_drm_private *priv, > + u32 power_mode); > +void yhgch_set_current_gate(struct yhgch_drm_private *priv, > + u32 gate); > + > +int yhgch_de_init(struct yhgch_drm_private *priv); > +int yhgch_vdac_init(struct yhgch_drm_private *priv); > +int yhgch_mm_init(struct yhgch_drm_private *yhgch); > +int yhgch_ddc_create(struct drm_device *drm_dev, struct yhgch_connector *connector); > + > +int yhgch_dumb_create(struct drm_file *file, struct drm_device *dev, > + struct drm_mode_create_dumb *args); > + > +#endif > diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_i2c.c b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_i2c.c > new file mode 100644 > index 000000000000..978226f120b7 > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_i2c.c > @@ -0,0 +1,108 @@ > +// SPDX-License-Identifier: GPL-2.0-or-later > + > +#include <linux/delay.h> > +#include <linux/pci.h> > + > +#include <drm/drm_atomic_helper.h> > +#include <drm/drm_probe_helper.h> > + > +#include <drm/drm_managed.h> > + > +#include "yhgch_drm_drv.h" > + > +#define GPIO_DATA 0x0802A0 > +#define GPIO_DATA_DIRECTION 0x0802A4 > + > +#define I2C_SCL_MASK BIT(0) > +#define I2C_SDA_MASK BIT(1) > + > +static void yhgch_set_i2c_signal(void *data, u32 mask, int value) > +{ > + struct yhgch_connector *yhgch_connector = data; > + struct yhgch_drm_private *priv = to_yhgch_drm_private(yhgch_connector->base.dev); > + u32 tmp_dir = readl(priv->mmio + GPIO_DATA_DIRECTION); > + > + if (value) { > + tmp_dir &= ~mask; > + writel(tmp_dir, priv->mmio + GPIO_DATA_DIRECTION); > + } else { > + u32 tmp_data = readl(priv->mmio + GPIO_DATA); > + > + tmp_data &= ~mask; > + writel(tmp_data, priv->mmio + GPIO_DATA); > + > + tmp_dir |= mask; > + writel(tmp_dir, priv->mmio + GPIO_DATA_DIRECTION); > + } > +} > + > +static int yhgch_get_i2c_signal(void *data, u32 mask) > +{ > + struct yhgch_connector *yhgch_connector = data; > + struct yhgch_drm_private *priv = to_yhgch_drm_private(yhgch_connector->base.dev); > + u32 tmp_dir = readl(priv->mmio + GPIO_DATA_DIRECTION); > + > + if ((tmp_dir & mask) != mask) { > + tmp_dir &= ~mask; > + writel(tmp_dir, priv->mmio + GPIO_DATA_DIRECTION); > + } > + > + return (readl(priv->mmio + GPIO_DATA) & mask) ? 1 : 0; > +} > + > +static void yhgch_ddc_setsda(void *data, int state) > +{ > + yhgch_set_i2c_signal(data, I2C_SDA_MASK, state); > +} > + > +static void yhgch_ddc_setscl(void *data, int state) > +{ > + yhgch_set_i2c_signal(data, I2C_SCL_MASK, state); > +} > + > +static int yhgch_ddc_getsda(void *data) > +{ > + return yhgch_get_i2c_signal(data, I2C_SDA_MASK); > +} > + > +static int yhgch_ddc_getscl(void *data) > +{ > + return yhgch_get_i2c_signal(data, I2C_SCL_MASK); > +} > + > +static void yhgch_ddc_release(struct drm_device *dev, void *res) > +{ > + struct yhgch_connector *yhgch_connector = res; > + > + i2c_del_adapter(&yhgch_connector->adapter); > +} > + > +int yhgch_ddc_create(struct drm_device *drm_dev, > + struct yhgch_connector *yhgch_connector) > +{ > + int ret = 0; > + > + yhgch_connector->adapter.owner = THIS_MODULE; > + snprintf(yhgch_connector->adapter.name, I2C_NAME_SIZE, "INS i2c bit bus"); > + yhgch_connector->adapter.dev.parent = drm_dev->dev; > + i2c_set_adapdata(&yhgch_connector->adapter, yhgch_connector); > + yhgch_connector->adapter.algo_data = &yhgch_connector->bit_data; > + > + yhgch_connector->bit_data.udelay = 20; > + yhgch_connector->bit_data.timeout = usecs_to_jiffies(2000); > + yhgch_connector->bit_data.data = yhgch_connector; > + yhgch_connector->bit_data.setsda = yhgch_ddc_setsda; > + yhgch_connector->bit_data.setscl = yhgch_ddc_setscl; > + yhgch_connector->bit_data.getsda = yhgch_ddc_getsda; > + yhgch_connector->bit_data.getscl = yhgch_ddc_getscl; > + > + ret = i2c_bit_add_bus(&yhgch_connector->adapter); > + if (ret) > + return ret; > + > + ret = drmm_add_action_or_reset(drm_dev, yhgch_ddc_release, yhgch_connector); > + if (ret) > + return ret; > + > + return ret; > +} > diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_regs.h b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_regs.h > new file mode 100644 > index 000000000000..d707f5186ab4 > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_regs.h > @@ -0,0 +1,209 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > + > +#ifndef YHGCH_DRM_HW_H > +#define YHGCH_DRM_HW_H > + > +/* register definition */ > +#define YHGCH_MISC_CTRL 0x4 > + > +#define YHGCH_MSCCTL_LOCALMEM_RESET(x) ((x) << 6) > +#define YHGCH_MSCCTL_LOCALMEM_RESET_MASK 0x40 > + > +#define YHGCH_CURRENT_GATE 0x000040 > +#define YHGCH_CURR_GATE_DISPLAY(x) ((x) << 2) > +#define YHGCH_CURR_GATE_DISPLAY_MASK 0x4 > + > +#define YHGCH_CURR_GATE_LOCALMEM(x) ((x) << 1) > +#define YHGCH_CURR_GATE_LOCALMEM_MASK 0x2 > + > +#define YHGCH_MODE0_GATE 0x000044 > +#define YHGCH_MODE1_GATE 0x000048 > +#define YHGCH_POWER_MODE_CTRL 0x00004C > + > +#define YHGCH_PW_MODE_CTL_OSC_INPUT(x) ((x) << 3) > +#define YHGCH_PW_MODE_CTL_OSC_INPUT_MASK 0x8 > + > +#define YHGCH_PW_MODE_CTL_MODE(x) ((x) << 0) > +#define YHGCH_PW_MODE_CTL_MODE_MASK 0x03 > +#define YHGCH_PW_MODE_CTL_MODE_SHIFT 0 > + > +#define YHGCH_PW_MODE_CTL_MODE_MODE0 0 > +#define YHGCH_PW_MODE_CTL_MODE_MODE1 1 > +#define YHGCH_PW_MODE_CTL_MODE_SLEEP 2 > + > +//#define YHGCH_CRT_PLL_CTRL 0x000060 > + > +#define YHGCH_PLL_CTRL_BYPASS(x) ((x) << 18) > +#define YHGCH_PLL_CTRL_BYPASS_MASK 0x40000 > + > +#define YHGCH_PLL_CTRL_POWER(x) ((x) << 17) > +#define YHGCH_PLL_CTRL_POWER_MASK 0x20000 > + > +#define YHGCH_PLL_CTRL_INPUT(x) ((x) << 16) > +#define YHGCH_PLL_CTRL_INPUT_MASK 0x10000 > + > +#define YHGCH_PLL_CTRL_POD(x) ((x) << 14) > +#define YHGCH_PLL_CTRL_POD_MASK 0xC000 > + > +#define YHGCH_PLL_CTRL_OD(x) ((x) << 12) > +#define YHGCH_PLL_CTRL_OD_MASK 0x3000 > + > +#define YHGCH_PLL_CTRL_N(x) ((x) << 8) > +#define YHGCH_PLL_CTRL_N_MASK 0xF00 > + > +#define YHGCH_PLL_CTRL_M(x) ((x) << 0) > +#define YHGCH_PLL_CTRL_M_MASK 0xFF > + > +#define YHGCH_CRT_DISP_CTL 0x80200 > + > +#define YHGCH_CRT_DISP_CTL_DPMS(x) ((x) << 30) > +#define YHGCH_CRT_DISP_CTL_DPMS_MASK 0xc0000000 > + > +#define YHGCH_CRT_DPMS_ON 0 > +#define YHGCH_CRT_DPMS_OFF 3 > + > +#define YHGCH_CRT_DISP_CTL_CRTSELECT(x) ((x) << 25) > +#define YHGCH_CRT_DISP_CTL_CRTSELECT_MASK 0x2000000 > + > +#define YHGCH_CRTSELECT_CRT 1 > + > +#define YHGCH_CRT_DISP_CTL_CLOCK_PHASE(x) ((x) << 14) > +#define YHGCH_CRT_DISP_CTL_CLOCK_PHASE_MASK 0x4000 > + > +#define YHGCH_CRT_DISP_CTL_VSYNC_PHASE(x) ((x) << 13) > +#define YHGCH_CRT_DISP_CTL_VSYNC_PHASE_MASK 0x2000 > + > +#define YHGCH_CRT_DISP_CTL_HSYNC_PHASE(x) ((x) << 12) > +#define YHGCH_CRT_DISP_CTL_HSYNC_PHASE_MASK 0x1000 > + > +#define YHGCH_CRT_DISP_CTL_TIMING(x) ((x) << 8) > +#define YHGCH_CRT_DISP_CTL_TIMING_MASK 0x100 > + > +#define YHGCH_CRT_DISP_CTL_PLANE(x) ((x) << 2) > +#define YHGCH_CRT_DISP_CTL_PLANE_MASK 4 > + > +#define YHGCH_CRT_DISP_CTL_FORMAT(x) ((x) << 0) > +#define YHGCH_CRT_DISP_CTL_FORMAT_MASK 0x03 > + > +#define YHGCH_CRT_FB_ADDRESS 0x080204 > + > +#define YHGCH_CRT_FB_WIDTH 0x080208 > +#define YHGCH_CRT_FB_WIDTH_WIDTH(x) ((x) << 16) > +#define YHGCH_CRT_FB_WIDTH_WIDTH_MASK 0x3FFF0000 > +#define YHGCH_CRT_FB_WIDTH_OFFS(x) ((x) << 0) > +#define YHGCH_CRT_FB_WIDTH_OFFS_MASK 0x3FFF > + > +#define YHGCH_CRT_HORZ_TOTAL 0x08020C > +#define YHGCH_CRT_HORZ_TOTAL_TOTAL(x) ((x) << 16) > +#define YHGCH_CRT_HORZ_TOTAL_TOTAL_MASK 0xFFF0000 > + > +#define YHGCH_CRT_HORZ_TOTAL_DISP_END(x) ((x) << 0) > +#define YHGCH_CRT_HORZ_TOTAL_DISP_END_MASK 0xFFF > + > +#define YHGCH_CRT_HORZ_SYNC 0x080210 > +#define YHGCH_CRT_HORZ_SYNC_WIDTH(x) ((x) << 16) > +#define YHGCH_CRT_HORZ_SYNC_WIDTH_MASK 0xFF0000 > + > +#define YHGCH_CRT_HORZ_SYNC_START(x) ((x) << 0) > +#define YHGCH_CRT_HORZ_SYNC_START_MASK 0xFFF > + > +#define YHGCH_CRT_VERT_TOTAL 0x080214 > +#define YHGCH_CRT_VERT_TOTAL_TOTAL(x) ((x) << 16) > +#define YHGCH_CRT_VERT_TOTAL_TOTAL_MASK 0x7FFF0000 > + > +#define YHGCH_CRT_VERT_TOTAL_DISP_END(x) ((x) << 0) > +#define YHGCH_CRT_VERT_TOTAL_DISP_END_MASK 0x7FF > + > +#define YHGCH_CRT_VERT_SYNC 0x080218 > +#define YHGCH_CRT_VERT_SYNC_HEIGHT(x) ((x) << 16) > +#define YHGCH_CRT_VERT_SYNC_HEIGHT_MASK 0x3F0000 > + > +#define YHGCH_CRT_VERT_SYNC_START(x) ((x) << 0) > +#define YHGCH_CRT_VERT_SYNC_START_MASK 0x7FF > + > +/* Hardware Cursor */ > +#define YHGCH_HWC_ADDRESS 0x080230 > +#define YHGCH_HWC_ADDRESS_ENABLE(x) ((x) << 31) > +#define YHGCH_HWC_ADDRESS_ENABLE_MASK 0x80000000 > +#define YHGCH_HWC_ADDRESS_ADDRESS(x) ((x) << 0) > +#define YHGCH_HWC_ADDRESS_ADDRESS_MASK 0xFFFFFFF > + > +#define YHGCH_HWC_LOCATION 0x080234 > +#define YHGCH_HWC_LOCATION_TOP(x) ((x) << 27) > +#define YHGCH_HWC_LOCATION_TOP_MASK 0x8000000 > +#define YHGCH_HWC_LOCATION_Y(x) ((x) << 16) > +#define YHGCH_HWC_LOCATION_Y_MASK 0x7FF0000 > +#define YHGCH_HWC_LOCATION_LEFT(x) ((x) << 11) > +#define YHGCH_HWC_LOCATION_LEFT_MASK 0x800 > +#define YHGCH_HWC_LOCATION_X(x) ((x) << 0) > +#define YHGCH_HWC_LOCATION_X_MASK 0x7FF > + > +#define YHGCH_HWC_COLOR_12 0x080238 > +#define YHGCH_HWC_COLOR_12_2_RGB(x) ((x) << 16) > +#define YHGCH_HWC_COLOR_12_2_RGB_MASK 0xFFFF0000 > +#define YHGCH_HWC_COLOR_12_1_RGB(x) ((x) << 0) > +#define YHGCH_HWC_COLOR_12_1_RGB_MASK 0xFFFF > + > +#define YHGCH_HWC_COLOR_3 0x08023C > +#define YHGCH_HWC_COLOR_3_RGB(x) ((x) << 0) > +#define YHGCH_HWC_COLOR_3_RGB_MASK 0xFFFF > + > +/* Auto Centering */ > +#define YHGCH_CRT_AUTO_CENTERING_TL 0x080280 > +#define YHGCH_CRT_AUTO_CENTERING_TL_TOP(x) ((x) << 16) > +#define YHGCH_CRT_AUTO_CENTERING_TL_TOP_MASK 0x7FF0000 > + > +#define YHGCH_CRT_AUTO_CENTERING_TL_LEFT(x) ((x) << 0) > +#define YHGCH_CRT_AUTO_CENTERING_TL_LEFT_MASK 0x7FF > + > +#define YHGCH_CRT_AUTO_CENTERING_BR 0x080284 > +#define YHGCH_CRT_AUTO_CENTERING_BR_BOTTOM(x) ((x) << 16) > +#define YHGCH_CRT_AUTO_CENTERING_BR_BOTTOM_MASK 0x7FF0000 > + > +#define YHGCH_CRT_AUTO_CENTERING_BR_RIGHT(x) ((x) << 0) > +#define YHGCH_CRT_AUTO_CENTERING_BR_RIGHT_MASK 0x7FF > + > +/* register to control panel output */ > +#define YHGCH_DISPLAY_CONTROL_HISILE 0x80288 > +#define YHGCH_DISPLAY_CONTROL_FPVDDEN(x) ((x) << 0) > +#define YHGCH_DISPLAY_CONTROL_PANELDATE(x) ((x) << 1) > +#define YHGCH_DISPLAY_CONTROL_FPEN(x) ((x) << 2) > +#define YHGCH_DISPLAY_CONTROL_VBIASEN(x) ((x) << 3) > + > +#define YHGCH_RAW_INTERRUPT 0x80290 > +#define YHGCH_RAW_INTERRUPT_VBLANK(x) ((x) << 2) > +#define YHGCH_RAW_INTERRUPT_VBLANK_MASK 0x4 > + > +#define YHGCH_RAW_INTERRUPT_EN 0x80298 > +#define YHGCH_RAW_INTERRUPT_EN_VBLANK(x) ((x) << 2) > +#define YHGCH_RAW_INTERRUPT_EN_VBLANK_MASK 0x4 > + > +/* register and values for PLL control */ > +#define CRT_PLL1_NS 0x802a8 > +#define CRT_PLL1_NS_OUTER_BYPASS(x) ((x) << 30) > +#define CRT_PLL1_NS_INTER_BYPASS(x) ((x) << 29) > +#define CRT_PLL1_NS_POWERON(x) ((x) << 24) > + > +#define CRT_PLL1_NS_25MHZ 0x00006691 //640x480 > +#define CRT_PLL1_NS_40MHZ 0x00004580 //800x600 > +#define CRT_PLL1_NS_65MHZ 0x00002568 //1024x768 > +#define CRT_PLL1_NS_83MHZ 0x000027bb //1280x800 > +#define CRT_PLL1_NS_106MHZ 0x000027ef //1440x900 > +#define CRT_PLL1_NS_108MHZ 0x000027f2 //1280x1024 > +#define CRT_PLL1_NS_146MHZ 0x00001575 //1680x1050 > +#define CRT_PLL1_NS_148MHZ 0x0000145f //1920x1080 > +#define CRT_PLL1_NS_193MHZ 0x000018f7 //1920x1200 > + > +#define CRT_PLL2_NS 0x802ac > +#define CRT_PLL2_NS_25MHZ 0x0 > +#define CRT_PLL2_NS_40MHZ 0x0 > +#define CRT_PLL2_NS_65MHZ 0x0 > +#define CRT_PLL2_NS_83MHZ 0x0 > +#define CRT_PLL2_NS_106MHZ 0x0 > +#define CRT_PLL2_NS_108MHZ 0x0 > +#define CRT_PLL2_NS_146MHZ 0x0 > +#define CRT_PLL2_NS_148MHZ 0x0 > +#define CRT_PLL2_NS_193MHZ 0x0 > + > +#define YHGCH_FIELD(field, value) (field(value) & field##_MASK) > +#endif > diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_vdac.c b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_vdac.c > new file mode 100644 > index 000000000000..5811a2608722 > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_vdac.c > @@ -0,0 +1,110 @@ > +// SPDX-License-Identifier: GPL-2.0 > + > +#include <linux/io.h> > + > +#include <drm/drm_atomic_helper.h> > +#include <drm/drm_edid.h> > +#include <drm/drm_probe_helper.h> > +#include <drm/drm_print.h> > +#include <drm/drm_simple_kms_helper.h> > + > +#include "yhgch_drm_drv.h" > +#include "yhgch_drm_regs.h" > + > +static int yhgch_connector_get_modes(struct drm_connector *connector) > +{ > + int count; > + void *edid; > + struct yhgch_connector *yhgch_connector = to_yhgch_connector(connector); > + > + edid = drm_get_edid(connector, &yhgch_connector->adapter); > + if (edid) { > + drm_connector_update_edid_property(connector, edid); > + count = drm_add_edid_modes(connector, edid); > + if (count) > + goto out; > + } > + > + count = drm_add_modes_noedid(connector, > + connector->dev->mode_config.max_width, > + connector->dev->mode_config.max_height); > + drm_set_preferred_mode(connector, 1024, 768); > + > +out: > + kfree(edid); > + return count; > +} IIRC I mentioned the drm_connector_helper_get_modes() function. Why didn't you use it in your driver? Why do you set default modes if no EDID could be retrieved? > + > +static const struct drm_connector_helper_funcs > + yhgch_connector_helper_funcs = { > + .get_modes = yhgch_connector_get_modes, > + .detect_ctx = drm_connector_helper_detect_from_ddc, > +}; > + > +static const struct drm_connector_funcs yhgch_connector_funcs = { > + .fill_modes = drm_helper_probe_single_connector_modes, > + .destroy = drm_connector_cleanup, > + .reset = drm_atomic_helper_connector_reset, > + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, > + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, > +}; > + > +static void yhgch_encoder_mode_set(struct drm_encoder *encoder, > + struct drm_display_mode *mode, > + struct drm_display_mode *adj_mode) > +{ > + u32 reg; > + struct drm_device *dev = encoder->dev; > + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); > + > + reg = readl(priv->mmio + YHGCH_DISPLAY_CONTROL_HISILE); > + reg |= YHGCH_DISPLAY_CONTROL_FPVDDEN(1); > + reg |= YHGCH_DISPLAY_CONTROL_PANELDATE(1); > + reg |= YHGCH_DISPLAY_CONTROL_FPEN(1); > + reg |= YHGCH_DISPLAY_CONTROL_VBIASEN(1); > + writel(reg, priv->mmio + YHGCH_DISPLAY_CONTROL_HISILE); > +} > + > +static const struct drm_encoder_helper_funcs yhgch_encoder_helper_funcs = { > + .mode_set = yhgch_encoder_mode_set, > +}; > + > +int yhgch_vdac_init(struct yhgch_drm_private *priv) > +{ > + struct drm_device *dev = &priv->dev; > + struct yhgch_connector *yhgch_connector = &priv->connector; > + struct drm_encoder *encoder = &priv->encoder; > + struct drm_crtc *crtc = &priv->crtc; > + struct drm_connector *connector = &yhgch_connector->base; > + int ret; > + > + ret = yhgch_ddc_create(dev, yhgch_connector); > + if (ret) { > + drm_err(dev, "failed to create ddc: %d\n", ret); > + return ret; > + } > + > + encoder->possible_crtcs = drm_crtc_mask(crtc); > + ret = drm_simple_encoder_init(dev, encoder, DRM_MODE_ENCODER_DAC); drm_simple_encoder_init() is deprecated. Please use the regular drm_encoder_init() with your own copy of the drm_encoder_funcs. Best regards Thomas > + if (ret) { > + drm_err(dev, "failed to init encoder: %d\n", ret); > + return ret; > + } > + > + drm_encoder_helper_add(encoder, &yhgch_encoder_helper_funcs); > + > + ret = drm_connector_init_with_ddc(dev, connector, > + &yhgch_connector_funcs, > + DRM_MODE_CONNECTOR_VGA, > + &yhgch_connector->adapter); > + if (ret) { > + drm_err(dev, "failed to init connector: %d\n", ret); > + return ret; > + } > + drm_connector_helper_add(connector, &yhgch_connector_helper_funcs); > + connector->polled = DRM_CONNECTOR_POLL_CONNECT | DRM_CONNECTOR_POLL_DISCONNECT; > + > + drm_connector_attach_encoder(connector, encoder); > + > + return 0; > +} -- -- Thomas Zimmermann Graphics Driver Developer SUSE Software Solutions Germany GmbH Frankenstrasse 146, 90461 Nuernberg, Germany GF: Ivo Totev, Andrew Myers, Andrew McDonald, Boudien Moerman HRB 36809 (AG Nuernberg) ^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH v3 0/1] gpu: drm: add support for Yhgc ZX1000 soc chipset 2025-09-04 11:19 ` Thomas Zimmermann @ 2025-09-10 2:23 ` Chu Guangqing 2025-09-10 2:23 ` [PATCH v3 1/1] [DRIVER] " Chu Guangqing 0 siblings, 1 reply; 22+ messages in thread From: Chu Guangqing @ 2025-09-10 2:23 UTC (permalink / raw) To: tzimmermann, maarten.lankhorst, mripard, airlied, simona Cc: linux-kernel, dri-devel, Chu Guangqing Hi Thomas, Based on the review, we have updated a version and provided responses to the issues. > Am 03.09.25 um 07:45 schrieb chuguangqing: > add support for Yhgc BMC soc chipset > > Signed-off-by: chuguangqing <chuguangqing@inspur.com> > --- > MAINTAINERS | 5 + > drivers/gpu/drm/Kconfig | 2 + > drivers/gpu/drm/Makefile | 1 + > drivers/gpu/drm/yhgch/Kconfig | 3 + > drivers/gpu/drm/yhgch/Makefile | 1 + > drivers/gpu/drm/yhgch/yhgch-drm/Kconfig | 12 + > drivers/gpu/drm/yhgch/yhgch-drm/Makefile | 5 + > .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_de.c | 428 ++++++++++++++++++ > .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.c | 324 +++++++++++++ > .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.h | 54 +++ > .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_i2c.c | 108 +++++ > .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_regs.h | 209 +++++++++ > .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_vdac.c | 110 +++++ > 13 files changed, 1262 insertions(+) > create mode 100644 drivers/gpu/drm/yhgch/Kconfig > create mode 100644 drivers/gpu/drm/yhgch/Makefile > create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/Kconfig > create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/Makefile > create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_de.c > create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.c > create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.h > create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_i2c.c > create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_regs.h > create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_vdac.c > > diff --git a/MAINTAINERS b/MAINTAINERS index > 10614ca41ed0..c79d9361fa81 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -27744,6 +27744,11 @@ S: Maintained > F: Documentation/input/devices/yealink.rst > F: drivers/input/misc/yealink.* > > +YHGC DRM DRIVER > +M: chuguangqing <chuguangqing@inspur.com> > +S: Maintained > +F: drivers/gpu/drm/yhgch > + > Z8530 DRIVER FOR AX.25 > M: Joerg Reuter <jreuter@yaina.de> > L: linux-hams@vger.kernel.org > diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index > f7ea8e895c0c..8e0b1d12c81f 100644 > --- a/drivers/gpu/drm/Kconfig > +++ b/drivers/gpu/drm/Kconfig > @@ -396,6 +396,8 @@ source "drivers/gpu/drm/sprd/Kconfig" > > source "drivers/gpu/drm/imagination/Kconfig" > > +source "drivers/gpu/drm/yhgch/Kconfig" > + > config DRM_HYPERV > tristate "DRM Support for Hyper-V synthetic video device" > depends on DRM && PCI && HYPERV > diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile index > 4dafbdc8f86a..f344e0173b29 100644 > --- a/drivers/gpu/drm/Makefile > +++ b/drivers/gpu/drm/Makefile > @@ -231,6 +231,7 @@ obj-y += solomon/ > obj-$(CONFIG_DRM_SPRD) += sprd/ > obj-$(CONFIG_DRM_LOONGSON) += loongson/ > obj-$(CONFIG_DRM_POWERVR) += imagination/ > +obj-$(CONFIG_DRM_YHGCH) += yhgch/ > > # Ensure drm headers are self-contained and pass kernel-doc > hdrtest-files := \ > diff --git a/drivers/gpu/drm/yhgch/Kconfig > b/drivers/gpu/drm/yhgch/Kconfig new file mode 100644 index > 000000000000..4d2f473dbb4a > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/Kconfig > @@ -0,0 +1,3 @@ > +# License: GPL-2.0 > + > +source "drivers/gpu/drm/yhgch/yhgch-drm/Kconfig" > diff --git a/drivers/gpu/drm/yhgch/Makefile > b/drivers/gpu/drm/yhgch/Makefile new file mode 100644 index > 000000000000..c5229239002b > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/Makefile > @@ -0,0 +1 @@ > +obj-$(CONFIG_DRM_YHGCH) += yhgch-drm/ > diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/Kconfig > b/drivers/gpu/drm/yhgch/yhgch-drm/Kconfig > new file mode 100644 > index 000000000000..10d586bbe897 > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/yhgch-drm/Kconfig > @@ -0,0 +1,12 @@ > +config DRM_YHGCH > + tristate "DRM Support for Yhgch BMC" > + depends on DRM && PCI && MMU > + select DRM_CLIENT_SELECTION > + select DRM_KMS_HELPER > + select DRM_VRAM_HELPER As I mentioned before, vram helpers are really deprecated. Please either internalize their code into your driver or use gem-shmem instead. Answer:We will use gem-shmem in the future. For this version, we will still use the VRAM helper. At the same time, we also noticed that there are other modules in the Linux kernel that are also using the vram helper. > + select DRM_TTM_HELPER > + help > + Choose this option if you have a Yhgch soc chipset. > + If M is selected the module will be called yhgch - drm. > + IF Y is selected the module will be built into the kernel. > + IF N is selected the module will be excluded from the kernel. > diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/Makefile b/drivers/gpu/drm/yhgch/yhgch-drm/Makefile > new file mode 100644 > index 000000000000..e9cc4dc6568d > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/yhgch-drm/Makefile > @@ -0,0 +1,5 @@ > +yhgch-drm-y := yhgch_drm_drv.o yhgch_drm_de.o yhgch_drm_vdac.o yhgch_drm_i2c.o > + > +obj-$(CONFIG_DRM_YHGCH) += yhgch-drm.o > + > + > diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_de.c b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_de.c > new file mode 100644 > index 000000000000..a8463121190c > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_de.c > @@ -0,0 +1,428 @@ > +// SPDX-License-Identifier: GPL-2.0-or-later > + > +#include <linux/delay.h> > +#include <drm/drm_atomic.h> > +#include <drm/drm_atomic_helper.h> > +#include <drm/drm_fourcc.h> > + > +#include <drm/drm_gem_vram_helper.h> > +#include <drm/drm_vblank.h> > + > +#include "yhgch_drm_drv.h" > +#include "yhgch_drm_regs.h" > + > +struct yhgch_dislay_pll_config { > + u64 hdisplay; > + u64 vdisplay; > + u32 pll1_config_value; > + u32 pll2_config_value; > +}; > + > +static const struct yhgch_dislay_pll_config yhgch_pll_table[] = { > + { 640, 480, CRT_PLL1_NS_25MHZ, CRT_PLL2_NS_25MHZ }, > + { 800, 600, CRT_PLL1_NS_40MHZ, CRT_PLL2_NS_40MHZ }, > + { 1024, 768, CRT_PLL1_NS_65MHZ, CRT_PLL2_NS_65MHZ }, > + { 1280, 1024, CRT_PLL1_NS_108MHZ, CRT_PLL2_NS_108MHZ }, > + { 1920, 1080, CRT_PLL1_NS_148MHZ, CRT_PLL2_NS_148MHZ }, > +}; > + > +static int yhgch_plane_atomic_check(struct drm_plane *plane, > + struct drm_atomic_state *state) > +{ > + struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state, > + plane); > + struct drm_framebuffer *fb = new_plane_state->fb; > + struct drm_crtc_state *new_crtc_state = NULL; > + int ret; > + > + if (!fb) > + return 0; > + > + if (new_plane_state->crtc) > + new_crtc_state = drm_atomic_get_new_crtc_state(state, new_plane_state->crtc); > + > + if (new_plane_state->crtc_x + new_plane_state->crtc_w > > + new_crtc_state->adjusted_mode.hdisplay || > + new_plane_state->crtc_y + new_plane_state->crtc_h > > + new_crtc_state->adjusted_mode.vdisplay) { > + drm_dbg_atomic(plane->dev, "visible portion of plane is invalid\n"); > + return -EINVAL; > + } > + > + if (new_plane_state->fb->pitches[0] % 16 != 0) { > + drm_dbg_atomic(plane->dev, "wrong stride with 16-byte aligned\n"); > + return -EINVAL; > + } > + > + ret = drm_atomic_helper_check_plane_state(new_plane_state, new_crtc_state, > + DRM_PLANE_NO_SCALING, > + DRM_PLANE_NO_SCALING, > + false, true); > + if (ret) { > + return ret; > + } else if (!new_plane_state->visible) { > + if (drm_WARN_ON(plane->dev, new_plane_state->crtc)) /* cannot legally happen */ > + return -EINVAL; > + else > + return 0; > + } You need to do this code block before anything else. Please also drop the warn-on branch. Answer:The order of the code blocks has been adjusted, and the "warn-on" branch has been removed. > + return 0; > +} > + > +static void yhgch_plane_atomic_update(struct drm_plane *plane, > + struct drm_atomic_state *state) > +{ > + struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state, > + plane); > + u32 reg; > + s64 gpu_addr = 0; > + u32 line_l; > + struct yhgch_drm_private *priv = to_yhgch_drm_private(plane->dev); > + struct drm_gem_vram_object *gbo; > + > + if (!new_state->fb) > + return; > + > + gbo = drm_gem_vram_of_gem(new_state->fb->obj[0]); > + > + gpu_addr = drm_gem_vram_offset(gbo); > + if (gpu_addr < 0) > + return; > + > + writel(gpu_addr, priv->mmio + YHGCH_CRT_FB_ADDRESS); > + > + reg = new_state->fb->width * (new_state->fb->format->cpp[0]); > + > + line_l = new_state->fb->pitches[0]; > + writel(YHGCH_FIELD(YHGCH_CRT_FB_WIDTH_WIDTH, reg) | > + YHGCH_FIELD(YHGCH_CRT_FB_WIDTH_OFFS, line_l), > + priv->mmio + YHGCH_CRT_FB_WIDTH); > + > + /* SET PIXEL FORMAT */ > + reg = readl(priv->mmio + YHGCH_CRT_DISP_CTL); > + reg &= ~YHGCH_CRT_DISP_CTL_FORMAT_MASK; > + reg |= YHGCH_FIELD(YHGCH_CRT_DISP_CTL_FORMAT, > + new_state->fb->format->cpp[0] * 8 / 16); > + writel(reg, priv->mmio + YHGCH_CRT_DISP_CTL); > +} > + > +static const u32 channel_formats1[] = { > + DRM_FORMAT_RGB565, DRM_FORMAT_RGB888, > + DRM_FORMAT_XRGB8888, DRM_FORMAT_RGBA8888, DRM_FORMAT_ARGB8888 Preferably just one format per line. In my earlier review, I asked about support for alpha channels and how it is being programmed into hardware. Please address these questions. Answer:We do not support the alpha channel and have removed the related formats for the alpha channel. > +}; > + > +static struct drm_plane_funcs yhgch_plane_funcs = { > + .update_plane = drm_atomic_helper_update_plane, > + .disable_plane = drm_atomic_helper_disable_plane, > + .destroy = drm_plane_cleanup, > + .reset = drm_atomic_helper_plane_reset, > + .atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state, > + .atomic_destroy_state = drm_atomic_helper_plane_destroy_state, > +}; > + > +static const struct drm_plane_helper_funcs yhgch_plane_helper_funcs = { > + DRM_GEM_VRAM_PLANE_HELPER_FUNCS, > + .atomic_check = yhgch_plane_atomic_check, > + .atomic_update = yhgch_plane_atomic_update, > +}; > + > +static void yhgch_crtc_dpms(struct drm_crtc *crtc, u32 dpms) > +{ > + struct yhgch_drm_private *priv = to_yhgch_drm_private(crtc->dev); > + u32 reg; > + > + reg = readl(priv->mmio + YHGCH_CRT_DISP_CTL); > + reg &= ~YHGCH_CRT_DISP_CTL_DPMS_MASK; > + reg |= YHGCH_FIELD(YHGCH_CRT_DISP_CTL_DPMS, dpms); > + reg &= ~YHGCH_CRT_DISP_CTL_TIMING_MASK; > + if (dpms == YHGCH_CRT_DPMS_ON) > + reg |= YHGCH_CRT_DISP_CTL_TIMING(1); > + writel(reg, priv->mmio + YHGCH_CRT_DISP_CTL); > +} > + > +static void yhgch_crtc_atomic_enable(struct drm_crtc *crtc, > + struct drm_atomic_state *old_state) > +{ > + u32 reg; > + struct yhgch_drm_private *priv = to_yhgch_drm_private(crtc->dev); > + > + yhgch_set_power_mode(priv, YHGCH_PW_MODE_CTL_MODE_MODE0); > + > + /* Enable display power gate & LOCALMEM power gate */ > + reg = readl(priv->mmio + YHGCH_CURRENT_GATE); > + reg &= ~YHGCH_CURR_GATE_LOCALMEM_MASK; > + reg &= ~YHGCH_CURR_GATE_DISPLAY_MASK; > + reg |= YHGCH_CURR_GATE_LOCALMEM(1); > + reg |= YHGCH_CURR_GATE_DISPLAY(1); > + yhgch_set_current_gate(priv, reg); > + yhgch_crtc_dpms(crtc, YHGCH_CRT_DPMS_ON); > +} > + > +static void yhgch_crtc_atomic_disable(struct drm_crtc *crtc, > + struct drm_atomic_state *old_state) > +{ > + u32 reg; > + struct yhgch_drm_private *priv = to_yhgch_drm_private(crtc->dev); > + > + yhgch_crtc_dpms(crtc, YHGCH_CRT_DPMS_OFF); > + > + yhgch_set_power_mode(priv, YHGCH_PW_MODE_CTL_MODE_SLEEP); > + > + /* Enable display power gate & LOCALMEM power gate */ > + reg = readl(priv->mmio + YHGCH_CURRENT_GATE); > + reg &= ~YHGCH_CURR_GATE_LOCALMEM_MASK; > + reg &= ~YHGCH_CURR_GATE_DISPLAY_MASK; > + reg |= YHGCH_CURR_GATE_LOCALMEM(0); > + reg |= YHGCH_CURR_GATE_DISPLAY(0); > + yhgch_set_current_gate(priv, reg); > +} > + > +static enum drm_mode_status > +yhgch_crtc_mode_valid(struct drm_crtc *crtc, > + const struct drm_display_mode *mode) > +{ > + size_t i = 0; > + int vrefresh = drm_mode_vrefresh(mode); > + > + if (vrefresh < 59 || vrefresh > 61) > + return MODE_NOCLOCK; > + > + for (i = 0; i < ARRAY_SIZE(yhgch_pll_table); i++) { > + if (yhgch_pll_table[i].hdisplay == mode->hdisplay && > + yhgch_pll_table[i].vdisplay == mode->vdisplay) > + return MODE_OK; > + } > + > + return MODE_BAD; > +} > + > +static void set_vclock_yhgch(struct drm_device *dev, u64 pll) > +{ > + u32 val; > + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); > + > + val = readl(priv->mmio + CRT_PLL1_NS); > + val &= ~(CRT_PLL1_NS_OUTER_BYPASS(1)); > + writel(val, priv->mmio + CRT_PLL1_NS); > + > + val = CRT_PLL1_NS_INTER_BYPASS(1) | CRT_PLL1_NS_POWERON(1); > + writel(val, priv->mmio + CRT_PLL1_NS); > + > + writel(pll, priv->mmio + CRT_PLL1_NS); > + > + usleep_range(1000, 2000); > + > + val = pll & ~(CRT_PLL1_NS_POWERON(1)); > + writel(val, priv->mmio + CRT_PLL1_NS); > + > + usleep_range(1000, 2000); > + > + val &= ~(CRT_PLL1_NS_INTER_BYPASS(1)); > + writel(val, priv->mmio + CRT_PLL1_NS); > + > + usleep_range(1000, 2000); > + > + val |= CRT_PLL1_NS_OUTER_BYPASS(1); > + writel(val, priv->mmio + CRT_PLL1_NS); > +} > + > +static void get_pll_config(u64 x, u64 y, u32 *pll1, u32 *pll2) > +{ > + size_t i; > + size_t count = ARRAY_SIZE(yhgch_pll_table); > + > + for (i = 0; i < count; i++) { > + if (yhgch_pll_table[i].hdisplay == x && > + yhgch_pll_table[i].vdisplay == y) { > + *pll1 = yhgch_pll_table[i].pll1_config_value; > + *pll2 = yhgch_pll_table[i].pll2_config_value; > + return; > + } > + } > + > + /* if found none, we use default value */ > + *pll1 = CRT_PLL1_NS_25MHZ; > + *pll2 = CRT_PLL2_NS_25MHZ; > +} > + > +/* > + * This function takes care the extra registers and bit fields required to > + * setup a mode in board. > + * Explanation about Display Control register: > + * FPGA only supports 7 predefined pixel clocks, and clock select is > + * in bit 4:0 of new register 0x802a8. > + */ > +static u32 display_ctrl_adjust(struct drm_device *dev, > + struct drm_display_mode *mode, > + u32 ctrl) > +{ > + u64 w, h; > + u32 pll1; /* bit[31:0] of PLL */ > + u32 pll2; /* bit[63:32] of PLL */ > + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); > + > + w = mode->hdisplay; > + h = mode->vdisplay; > + > + get_pll_config(w, h, &pll1, &pll2); > + writel(pll2, priv->mmio + CRT_PLL2_NS); > + set_vclock_yhgch(dev, pll1); > + > + /* > + * yhgch has to set up the top-left and bottom-right > + * registers as well. > + * Note that normal chip only use those two register for > + * auto-centering mode. > + */ > + writel(YHGCH_FIELD(YHGCH_CRT_AUTO_CENTERING_TL_TOP, 0) | > + YHGCH_FIELD(YHGCH_CRT_AUTO_CENTERING_TL_LEFT, 0), > + priv->mmio + YHGCH_CRT_AUTO_CENTERING_TL); > + > + writel(YHGCH_FIELD(YHGCH_CRT_AUTO_CENTERING_BR_BOTTOM, h - 1) | > + YHGCH_FIELD(YHGCH_CRT_AUTO_CENTERING_BR_RIGHT, w - 1), > + priv->mmio + YHGCH_CRT_AUTO_CENTERING_BR); > + > + /* > + * Assume common fields in ctrl have been properly set before > + * calling this function. > + * This function only sets the extra fields in ctrl. > + */ > + > + /* Set bit 25 of display controller: Select CRT or VGA clock */ > + ctrl &= ~YHGCH_CRT_DISP_CTL_CRTSELECT_MASK; > + ctrl &= ~YHGCH_CRT_DISP_CTL_CLOCK_PHASE_MASK; > + > + ctrl |= YHGCH_CRT_DISP_CTL_CRTSELECT(YHGCH_CRTSELECT_CRT); > + > + /* clock_phase_polarity is 0 */ > + ctrl |= YHGCH_CRT_DISP_CTL_CLOCK_PHASE(0); > + ctrl |= YHGCH_FIELD(YHGCH_CRT_DISP_CTL_FORMAT, 2); > + > + writel(ctrl, priv->mmio + YHGCH_CRT_DISP_CTL); > + > + return ctrl; > +} > + > +static void yhgch_crtc_mode_set_nofb(struct drm_crtc *crtc) > +{ > + u32 val; > + struct drm_display_mode *mode = &crtc->state->mode; > + struct drm_device *dev = crtc->dev; > + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); > + u32 width = mode->hsync_end - mode->hsync_start; > + u32 height = mode->vsync_end - mode->vsync_start; > + > + //writel(format_pll_reg(), priv->mmio + YHGCH_CRT_PLL_CTRL); > + writel(YHGCH_FIELD(YHGCH_CRT_HORZ_TOTAL_TOTAL, mode->htotal - 1) | > + YHGCH_FIELD(YHGCH_CRT_HORZ_TOTAL_DISP_END, mode->hdisplay - 1), > + priv->mmio + YHGCH_CRT_HORZ_TOTAL); > + > + writel(YHGCH_FIELD(YHGCH_CRT_HORZ_SYNC_WIDTH, width) | > + YHGCH_FIELD(YHGCH_CRT_HORZ_SYNC_START, mode->hsync_start - 1), > + priv->mmio + YHGCH_CRT_HORZ_SYNC); > + > + writel(YHGCH_FIELD(YHGCH_CRT_VERT_TOTAL_TOTAL, mode->vtotal - 1) | > + YHGCH_FIELD(YHGCH_CRT_VERT_TOTAL_DISP_END, mode->vdisplay - 1), > + priv->mmio + YHGCH_CRT_VERT_TOTAL); > + > + writel(YHGCH_FIELD(YHGCH_CRT_VERT_SYNC_HEIGHT, height) | > + YHGCH_FIELD(YHGCH_CRT_VERT_SYNC_START, mode->vsync_start - 1), > + priv->mmio + YHGCH_CRT_VERT_SYNC); > + > + val = YHGCH_FIELD(YHGCH_CRT_DISP_CTL_VSYNC_PHASE, 0); > + val |= YHGCH_FIELD(YHGCH_CRT_DISP_CTL_HSYNC_PHASE, 0); > + val |= YHGCH_CRT_DISP_CTL_TIMING(1); > + val |= YHGCH_CRT_DISP_CTL_PLANE(1); > + > + display_ctrl_adjust(dev, mode, val); > +} > + > +static void yhgch_crtc_atomic_begin(struct drm_crtc *crtc, > + struct drm_atomic_state *old_state) > +{ > + u32 reg; > + struct drm_device *dev = crtc->dev; > + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); > + > + yhgch_set_power_mode(priv, YHGCH_PW_MODE_CTL_MODE_MODE0); > + > + /* Enable display power gate & LOCALMEM power gate */ > + reg = readl(priv->mmio + YHGCH_CURRENT_GATE); > + reg &= ~YHGCH_CURR_GATE_DISPLAY_MASK; > + reg &= ~YHGCH_CURR_GATE_LOCALMEM_MASK; > + reg |= YHGCH_CURR_GATE_DISPLAY(1); > + reg |= YHGCH_CURR_GATE_LOCALMEM(1); > + yhgch_set_current_gate(priv, reg); > + > + /* We can add more initialization as needed. */ > +} > + > +static void yhgch_crtc_atomic_flush(struct drm_crtc *crtc, > + struct drm_atomic_state *state) > + > +{ > + unsigned long flags; > + > + spin_lock_irqsave(&crtc->dev->event_lock, flags); > + if (crtc->state->event) > + drm_crtc_send_vblank_event(crtc, crtc->state->event); > + crtc->state->event = NULL; > + spin_unlock_irqrestore(&crtc->dev->event_lock, flags); > +} Please drop the atomic-flush helper for now. As your driver doesn't implement vblank interrupts yet, the DRM framework will send out the vblank events automatically. When you add support for vblank interrupts in a later patch, you can still add the flush helper. Answer:We have removed the atomic_flush function. > + > +static const struct drm_crtc_funcs yhgch_crtc_funcs = { > + .page_flip = drm_atomic_helper_page_flip, > + .set_config = drm_atomic_helper_set_config, > + .destroy = drm_crtc_cleanup, > + .reset = drm_atomic_helper_crtc_reset, > + .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state, > + .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state, > + > +}; > + > +static const struct drm_crtc_helper_funcs yhgch_crtc_helper_funcs = { > + .mode_set_nofb = yhgch_crtc_mode_set_nofb, > + .atomic_begin = yhgch_crtc_atomic_begin, > + .atomic_flush = yhgch_crtc_atomic_flush, > + .atomic_enable = yhgch_crtc_atomic_enable, > + .atomic_disable = yhgch_crtc_atomic_disable, > + .mode_valid = yhgch_crtc_mode_valid, > +}; > + > +int yhgch_de_init(struct yhgch_drm_private *priv) > +{ > + struct drm_device *dev = &priv->dev; > + struct drm_crtc *crtc = &priv->crtc; > + struct drm_plane *plane = &priv->primary_plane; > + int ret; > + > + ret = drm_universal_plane_init(dev, plane, 1, &yhgch_plane_funcs, > + channel_formats1, > + ARRAY_SIZE(channel_formats1), > + NULL, > + DRM_PLANE_TYPE_PRIMARY, > + NULL); > + No empty line here, please. Answer:We have removed the empty line. > + if (ret) { > + drm_err(dev, "failed to init plane: %d\n", ret); > + return ret; > + } > + > + drm_plane_helper_add(plane, &yhgch_plane_helper_funcs); > + > + ret = drm_crtc_init_with_planes(dev, crtc, plane, > + NULL, &yhgch_crtc_funcs, NULL); > + if (ret) { > + drm_err(dev, "failed to init crtc: %d\n", ret); > + return ret; > + } > + > + ret = drm_mode_crtc_set_gamma_size(crtc, 256); > + if (ret) { > + drm_err(dev, "failed to set gamma size: %d\n", ret); > + return ret; > + } The driver does not appear to be using gamma tables anywhere. Please don't set this property then. Answer:We have removed the setting for gamma size. > + drm_crtc_helper_add(crtc, &yhgch_crtc_helper_funcs); > + > + return 0; > +} > diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.c b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.c > new file mode 100644 > index 000000000000..32a3126c5436 > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.c > @@ -0,0 +1,324 @@ > +// SPDX-License-Identifier: GPL-2.0 > + > +#include "yhgch_drm_drv.h" > + > +#include <linux/module.h> > +#include <linux/pci.h> > + > +#include <linux/aperture.h> > +#include <drm/clients/drm_client_setup.h> > + > +#include <drm/drm_atomic_helper.h> > +#include <drm/drm_drv.h> > +#include <drm/drm_fbdev_ttm.h> > + > +#include <drm/drm_gem_framebuffer_helper.h> > +#include <drm/drm_gem_vram_helper.h> > +#include <drm/drm_managed.h> > +#include <drm/drm_module.h> > +#include <drm/drm_vblank.h> > + > +#include <drm/drm_probe_helper.h> > + > +#include "yhgch_drm_drv.h" > +#include "yhgch_drm_regs.h" > + > +#define MEM_SIZE_RESERVE4KVM 0x200000 > + > +DEFINE_DRM_GEM_FOPS(yhgch_fops); > + > +int yhgch_dumb_create(struct drm_file *file, struct drm_device *dev, > + struct drm_mode_create_dumb *args) > +{ > + return drm_gem_vram_fill_create_dumb(file, dev, 0, 16, args); > +} > + > +static struct drm_driver yhgch_driver = { > + .driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC, > + .fops = &yhgch_fops, > + .name = "yhgch", > + .desc = "yhgch drm driver", > + .major = 3, > + .minor = 1, > + .debugfs_init = drm_vram_mm_debugfs_init, > + .dumb_create = yhgch_dumb_create, > + .dumb_map_offset = drm_gem_ttm_dumb_map_offset, > + DRM_FBDEV_TTM_DRIVER_OPS, > +}; > + > +static int __maybe_unused yhgch_pm_suspend(struct device *dev) > +{ > + struct drm_device *drm_dev = dev_get_drvdata(dev); > + > + return drm_mode_config_helper_suspend(drm_dev); > +} > + > +static int __maybe_unused yhgch_pm_resume(struct device *dev) > +{ > + struct drm_device *drm_dev = dev_get_drvdata(dev); > + > + return drm_mode_config_helper_resume(drm_dev); > +} > + > +static const struct dev_pm_ops yhgch_pm_ops = { > + SET_SYSTEM_SLEEP_PM_OPS(yhgch_pm_suspend, > + yhgch_pm_resume) > +}; > + > +static const struct drm_mode_config_funcs yhgch_mode_funcs = { > + .mode_valid = drm_vram_helper_mode_valid, > + .atomic_check = drm_atomic_helper_check, > + .atomic_commit = drm_atomic_helper_commit, > + .fb_create = drm_gem_fb_create, > +}; > + > +static int yhgch_kms_init(struct yhgch_drm_private *priv) > +{ > + struct drm_device *dev = &priv->dev; > + int ret; > + > + ret = drmm_mode_config_init(dev); > + if (ret) > + return ret; > + > + priv->dev.mode_config.min_width = 0; > + priv->dev.mode_config.min_height = 0; > + priv->dev.mode_config.max_width = 1920; > + priv->dev.mode_config.max_height = 1200; > + dev->mode_config.preferred_depth = 24; > + priv->dev.mode_config.prefer_shadow = 1; > + priv->dev.mode_config.funcs = &yhgch_mode_funcs; > + > + ret = yhgch_de_init(priv); > + if (ret) { > + drm_err(dev, "failed to init de: %d\n", ret); > + return ret; > + } > + > + ret = yhgch_vdac_init(priv); > + if (ret) { > + drm_err(dev, "failed to init vdac: %d\n", ret); > + return ret; > + } > + drm_kms_helper_poll_init(dev); > + > + return 0; > +} > + > +/* > + * It can operate in one of three modes: 0, 1 or Sleep. > + */ > +void yhgch_set_power_mode(struct yhgch_drm_private *priv, u32 power_mode) > +{ > + unsigned int control_value = 0; > + void __iomem *mmio = priv->mmio; > + u32 input = 1; > + > + if (power_mode > YHGCH_PW_MODE_CTL_MODE_SLEEP) > + return; > + > + if (power_mode == YHGCH_PW_MODE_CTL_MODE_SLEEP) > + input = 0; > + > + control_value = readl(mmio + YHGCH_POWER_MODE_CTRL); > + control_value &= ~(YHGCH_PW_MODE_CTL_MODE_MASK | > + YHGCH_PW_MODE_CTL_OSC_INPUT_MASK); > + control_value |= YHGCH_FIELD(YHGCH_PW_MODE_CTL_MODE, power_mode); > + control_value |= YHGCH_FIELD(YHGCH_PW_MODE_CTL_OSC_INPUT, input); > + writel(control_value, mmio + YHGCH_POWER_MODE_CTRL); > +} > + > +void yhgch_set_current_gate(struct yhgch_drm_private *priv, unsigned int gate) > +{ > + u32 gate_reg; > + u32 mode; > + void __iomem *mmio = priv->mmio; > + > + /* Get current power mode. */ > + mode = (readl(mmio + YHGCH_POWER_MODE_CTRL) & > + YHGCH_PW_MODE_CTL_MODE_MASK) >> YHGCH_PW_MODE_CTL_MODE_SHIFT; > + > + switch (mode) { > + case YHGCH_PW_MODE_CTL_MODE_MODE0: > + gate_reg = YHGCH_MODE0_GATE; > + break; > + > + case YHGCH_PW_MODE_CTL_MODE_MODE1: > + gate_reg = YHGCH_MODE1_GATE; > + break; > + > + default: > + gate_reg = YHGCH_MODE0_GATE; > + break; > + } > + writel(gate, mmio + gate_reg); > +} > + > +static void yhgch_hw_config(struct yhgch_drm_private *priv) > +{ > + u32 reg; > + > + /* On hardware reset, power mode 0 is default. */ > + yhgch_set_power_mode(priv, YHGCH_PW_MODE_CTL_MODE_MODE0); > + > + /* Enable display power gate & LOCALMEM power gate */ > + reg = readl(priv->mmio + YHGCH_CURRENT_GATE); > + reg &= ~YHGCH_CURR_GATE_DISPLAY_MASK; > + reg &= ~YHGCH_CURR_GATE_LOCALMEM_MASK; > + reg |= YHGCH_CURR_GATE_DISPLAY(1); > + reg |= YHGCH_CURR_GATE_LOCALMEM(1); > + > + yhgch_set_current_gate(priv, reg); > + > + /* > + * Reset the memory controller. If the memory controller > + * is not reset in chip,the system might hang when sw accesses > + * the memory.The memory should be resetted after > + * changing the MXCLK. > + */ > + reg = readl(priv->mmio + YHGCH_MISC_CTRL); > + reg &= ~YHGCH_MSCCTL_LOCALMEM_RESET_MASK; > + reg |= YHGCH_MSCCTL_LOCALMEM_RESET(0); > + writel(reg, priv->mmio + YHGCH_MISC_CTRL); > + > + reg &= ~YHGCH_MSCCTL_LOCALMEM_RESET_MASK; > + reg |= YHGCH_MSCCTL_LOCALMEM_RESET(1); > + > + writel(reg, priv->mmio + YHGCH_MISC_CTRL); > +} > + > +static int yhgch_hw_map(struct yhgch_drm_private *priv) > +{ > + struct drm_device *dev = &priv->dev; > + struct pci_dev *pdev = to_pci_dev(dev->dev); > + resource_size_t ioaddr, iosize; > + > + ioaddr = pci_resource_start(pdev, 1); > + iosize = pci_resource_len(pdev, 1); > + priv->mmio = devm_ioremap(dev->dev, ioaddr, iosize); > + if (!priv->mmio) { > + drm_err(dev, "Cannot map mmio region\n"); > + return -ENOMEM; > + } > + return 0; > +} > + > +static int yhgch_hw_init(struct yhgch_drm_private *priv) > +{ > + int ret; > + > + ret = yhgch_hw_map(priv); > + if (ret) > + return ret; > + yhgch_hw_config(priv); > + return 0; > +} > + > +static int yhgch_unload(struct drm_device *dev) > +{ > + drm_atomic_helper_shutdown(dev); > + > + pci_disable_msi(to_pci_dev(dev->dev)); > + > + return 0; > +} What's the reason for not using managed clean-up code? Answer:Since we do not use the vblank interrupt, there is no need to use managed cleanup code to clean up the IRQ, and the unload function has also been removed. > + > +static int yhgch_pci_probe(struct pci_dev *pdev, > + const struct pci_device_id *ent) > +{ > + struct yhgch_drm_private *priv; > + struct drm_device *dev; > + int ret; > + > + ret = aperture_remove_conflicting_pci_devices(pdev, yhgch_driver.name); > + > + if (ret) > + return ret; > + > + priv = devm_drm_dev_alloc(&pdev->dev, &yhgch_driver, > + struct yhgch_drm_private, dev); > + > + if (IS_ERR(priv)) { > + DRM_ERROR("failed to allocate drm_device\n"); No error message here, please. IIRC there's already an internal error message when allocation fails. Answer:We have removed the error message here. > + return PTR_ERR(priv); > + } > + > + dev = &priv->dev; > + pci_set_drvdata(pdev, dev); > + > + ret = pcim_enable_device(pdev); > + if (ret) { > + drm_err(dev, "failed to enable pci device: %d\n", ret); > + goto err_return; > + } > + > + ret = yhgch_hw_init(priv); > + if (ret) > + goto err_unload; > + ret = drmm_vram_helper_init(dev, pci_resource_start(pdev, 0), > + pci_resource_len(pdev, 0)); > + if (ret) { > + drm_err(dev, "Error initializing VRAM MM; %d\n", ret); > + goto err_unload; > + } > + ret = yhgch_kms_init(priv); > + if (ret) > + goto err_unload; > + > + ret = pci_enable_msi(pdev); > + if (ret) > + drm_warn(dev, "enabling MSI failed: %d\n", ret); > + /* reset all the states of crtc/plane/encoder/connector */ > + drm_mode_config_reset(dev); > + > + ret = drm_dev_register(dev, 0); > + if (ret) { > + drm_err(dev, "failed to register drv for userspace access: %d\n", > + ret); > + goto err_unload; > + } > + drm_client_setup(dev, NULL); > + > + return 0; > + > +err_unload: > + yhgch_unload(dev); > + drm_err(dev, "failed to initialize drm driver: %d\n", ret); No such generic error messages. Either warn where the error happens, or print nothing. Answer:We have removed the error message here.。 > +err_return: > + return ret; > +} > + > +static void yhgch_pci_remove(struct pci_dev *pdev) > +{ > + struct drm_device *dev = pci_get_drvdata(pdev); > + > + drm_dev_unregister(dev); > + yhgch_unload(dev); > +} > + > +static void yhgch_pci_shutdown(struct pci_dev *pdev) > +{ > + drm_atomic_helper_shutdown(pci_get_drvdata(pdev)); > +} > + > +static struct pci_device_id yhgch_pci_table[] = { > + { 0x1bd4, 0x0750, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, > + { 0, } > +}; > + > +static struct pci_driver yhgch_pci_driver = { > + .name = "yhgch-drm", > + .id_table = yhgch_pci_table, > + .probe = yhgch_pci_probe, > + .remove = yhgch_pci_remove, > + .shutdown = yhgch_pci_shutdown, > + .driver.pm = &yhgch_pm_ops, > +}; > + > +drm_module_pci_driver(yhgch_pci_driver); > + > +MODULE_DEVICE_TABLE(pci, yhgch_pci_table); > +MODULE_AUTHOR(""); > +MODULE_DESCRIPTION("DRM Driver for YhgchBMC"); > +MODULE_LICENSE("GPL"); > +MODULE_VERSION("3.1"); > diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.h b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.h > new file mode 100644 > index 000000000000..2584ac10b2c5 > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.h > @@ -0,0 +1,54 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > + > +#ifndef YHGCH_DRM_DRV_H > +#define YHGCH_DRM_DRV_H > + > +#include <linux/gpio/consumer.h> > +#include <linux/i2c-algo-bit.h> > +#include <linux/i2c.h> > +#include <linux/version.h> > +#include <drm/drm_framebuffer.h> > +#include <drm/drm_encoder.h> > + > +struct yhgch_connector { > + struct drm_connector base; > + struct i2c_adapter adapter; > + struct i2c_algo_bit_data bit_data; > +}; I mentioned the ddc code in mgag200, which works without a new connector struct and handles the i2c internally. Why didn't you adapt it to your driver? Answer:We did not redefine the new connector struct. > + > +struct yhgch_drm_private { > + /* hw */ > + void __iomem *mmio; > + > + /* drm */ > + struct drm_device dev; > + struct drm_plane primary_plane; > + struct drm_crtc crtc; > + struct drm_encoder encoder; > + struct yhgch_connector connector; > +}; > + > +static inline struct yhgch_connector *to_yhgch_connector(struct drm_connector *connector) > +{ > + return container_of(connector, struct yhgch_connector, base); > +} > + > +static inline struct yhgch_drm_private *to_yhgch_drm_private(struct drm_device *dev) > +{ > + return container_of(dev, struct yhgch_drm_private, dev); > +} > + > +void yhgch_set_power_mode(struct yhgch_drm_private *priv, > + u32 power_mode); > +void yhgch_set_current_gate(struct yhgch_drm_private *priv, > + u32 gate); > + > +int yhgch_de_init(struct yhgch_drm_private *priv); > +int yhgch_vdac_init(struct yhgch_drm_private *priv); > +int yhgch_mm_init(struct yhgch_drm_private *yhgch); > +int yhgch_ddc_create(struct drm_device *drm_dev, struct yhgch_connector *connector); > + > +int yhgch_dumb_create(struct drm_file *file, struct drm_device *dev, > + struct drm_mode_create_dumb *args); > + > +#endif > diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_i2c.c b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_i2c.c > new file mode 100644 > index 000000000000..978226f120b7 > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_i2c.c > @@ -0,0 +1,108 @@ > +// SPDX-License-Identifier: GPL-2.0-or-later > + > +#include <linux/delay.h> > +#include <linux/pci.h> > + > +#include <drm/drm_atomic_helper.h> > +#include <drm/drm_probe_helper.h> > + > +#include <drm/drm_managed.h> > + > +#include "yhgch_drm_drv.h" > + > +#define GPIO_DATA 0x0802A0 > +#define GPIO_DATA_DIRECTION 0x0802A4 > + > +#define I2C_SCL_MASK BIT(0) > +#define I2C_SDA_MASK BIT(1) > + > +static void yhgch_set_i2c_signal(void *data, u32 mask, int value) > +{ > + struct yhgch_connector *yhgch_connector = data; > + struct yhgch_drm_private *priv = to_yhgch_drm_private(yhgch_connector->base.dev); > + u32 tmp_dir = readl(priv->mmio + GPIO_DATA_DIRECTION); > + > + if (value) { > + tmp_dir &= ~mask; > + writel(tmp_dir, priv->mmio + GPIO_DATA_DIRECTION); > + } else { > + u32 tmp_data = readl(priv->mmio + GPIO_DATA); > + > + tmp_data &= ~mask; > + writel(tmp_data, priv->mmio + GPIO_DATA); > + > + tmp_dir |= mask; > + writel(tmp_dir, priv->mmio + GPIO_DATA_DIRECTION); > + } > +} > + > +static int yhgch_get_i2c_signal(void *data, u32 mask) > +{ > + struct yhgch_connector *yhgch_connector = data; > + struct yhgch_drm_private *priv = to_yhgch_drm_private(yhgch_connector->base.dev); > + u32 tmp_dir = readl(priv->mmio + GPIO_DATA_DIRECTION); > + > + if ((tmp_dir & mask) != mask) { > + tmp_dir &= ~mask; > + writel(tmp_dir, priv->mmio + GPIO_DATA_DIRECTION); > + } > + > + return (readl(priv->mmio + GPIO_DATA) & mask) ? 1 : 0; > +} > + > +static void yhgch_ddc_setsda(void *data, int state) > +{ > + yhgch_set_i2c_signal(data, I2C_SDA_MASK, state); > +} > + > +static void yhgch_ddc_setscl(void *data, int state) > +{ > + yhgch_set_i2c_signal(data, I2C_SCL_MASK, state); > +} > + > +static int yhgch_ddc_getsda(void *data) > +{ > + return yhgch_get_i2c_signal(data, I2C_SDA_MASK); > +} > + > +static int yhgch_ddc_getscl(void *data) > +{ > + return yhgch_get_i2c_signal(data, I2C_SCL_MASK); > +} > + > +static void yhgch_ddc_release(struct drm_device *dev, void *res) > +{ > + struct yhgch_connector *yhgch_connector = res; > + > + i2c_del_adapter(&yhgch_connector->adapter); > +} > + > +int yhgch_ddc_create(struct drm_device *drm_dev, > + struct yhgch_connector *yhgch_connector) > +{ > + int ret = 0; > + > + yhgch_connector->adapter.owner = THIS_MODULE; > + snprintf(yhgch_connector->adapter.name, I2C_NAME_SIZE, "INS i2c bit bus"); > + yhgch_connector->adapter.dev.parent = drm_dev->dev; > + i2c_set_adapdata(&yhgch_connector->adapter, yhgch_connector); > + yhgch_connector->adapter.algo_data = &yhgch_connector->bit_data; > + > + yhgch_connector->bit_data.udelay = 20; > + yhgch_connector->bit_data.timeout = usecs_to_jiffies(2000); > + yhgch_connector->bit_data.data = yhgch_connector; > + yhgch_connector->bit_data.setsda = yhgch_ddc_setsda; > + yhgch_connector->bit_data.setscl = yhgch_ddc_setscl; > + yhgch_connector->bit_data.getsda = yhgch_ddc_getsda; > + yhgch_connector->bit_data.getscl = yhgch_ddc_getscl; > + > + ret = i2c_bit_add_bus(&yhgch_connector->adapter); > + if (ret) > + return ret; > + > + ret = drmm_add_action_or_reset(drm_dev, yhgch_ddc_release, yhgch_connector); > + if (ret) > + return ret; > + > + return ret; > +} > diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_regs.h b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_regs.h > new file mode 100644 > index 000000000000..d707f5186ab4 > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_regs.h > @@ -0,0 +1,209 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > + > +#ifndef YHGCH_DRM_HW_H > +#define YHGCH_DRM_HW_H > + > +/* register definition */ > +#define YHGCH_MISC_CTRL 0x4 > + > +#define YHGCH_MSCCTL_LOCALMEM_RESET(x) ((x) << 6) > +#define YHGCH_MSCCTL_LOCALMEM_RESET_MASK 0x40 > + > +#define YHGCH_CURRENT_GATE 0x000040 > +#define YHGCH_CURR_GATE_DISPLAY(x) ((x) << 2) > +#define YHGCH_CURR_GATE_DISPLAY_MASK 0x4 > + > +#define YHGCH_CURR_GATE_LOCALMEM(x) ((x) << 1) > +#define YHGCH_CURR_GATE_LOCALMEM_MASK 0x2 > + > +#define YHGCH_MODE0_GATE 0x000044 > +#define YHGCH_MODE1_GATE 0x000048 > +#define YHGCH_POWER_MODE_CTRL 0x00004C > + > +#define YHGCH_PW_MODE_CTL_OSC_INPUT(x) ((x) << 3) > +#define YHGCH_PW_MODE_CTL_OSC_INPUT_MASK 0x8 > + > +#define YHGCH_PW_MODE_CTL_MODE(x) ((x) << 0) > +#define YHGCH_PW_MODE_CTL_MODE_MASK 0x03 > +#define YHGCH_PW_MODE_CTL_MODE_SHIFT 0 > + > +#define YHGCH_PW_MODE_CTL_MODE_MODE0 0 > +#define YHGCH_PW_MODE_CTL_MODE_MODE1 1 > +#define YHGCH_PW_MODE_CTL_MODE_SLEEP 2 > + > +//#define YHGCH_CRT_PLL_CTRL 0x000060 > + > +#define YHGCH_PLL_CTRL_BYPASS(x) ((x) << 18) > +#define YHGCH_PLL_CTRL_BYPASS_MASK 0x40000 > + > +#define YHGCH_PLL_CTRL_POWER(x) ((x) << 17) > +#define YHGCH_PLL_CTRL_POWER_MASK 0x20000 > + > +#define YHGCH_PLL_CTRL_INPUT(x) ((x) << 16) > +#define YHGCH_PLL_CTRL_INPUT_MASK 0x10000 > + > +#define YHGCH_PLL_CTRL_POD(x) ((x) << 14) > +#define YHGCH_PLL_CTRL_POD_MASK 0xC000 > + > +#define YHGCH_PLL_CTRL_OD(x) ((x) << 12) > +#define YHGCH_PLL_CTRL_OD_MASK 0x3000 > + > +#define YHGCH_PLL_CTRL_N(x) ((x) << 8) > +#define YHGCH_PLL_CTRL_N_MASK 0xF00 > + > +#define YHGCH_PLL_CTRL_M(x) ((x) << 0) > +#define YHGCH_PLL_CTRL_M_MASK 0xFF > + > +#define YHGCH_CRT_DISP_CTL 0x80200 > + > +#define YHGCH_CRT_DISP_CTL_DPMS(x) ((x) << 30) > +#define YHGCH_CRT_DISP_CTL_DPMS_MASK 0xc0000000 > + > +#define YHGCH_CRT_DPMS_ON 0 > +#define YHGCH_CRT_DPMS_OFF 3 > + > +#define YHGCH_CRT_DISP_CTL_CRTSELECT(x) ((x) << 25) > +#define YHGCH_CRT_DISP_CTL_CRTSELECT_MASK 0x2000000 > + > +#define YHGCH_CRTSELECT_CRT 1 > + > +#define YHGCH_CRT_DISP_CTL_CLOCK_PHASE(x) ((x) << 14) > +#define YHGCH_CRT_DISP_CTL_CLOCK_PHASE_MASK 0x4000 > + > +#define YHGCH_CRT_DISP_CTL_VSYNC_PHASE(x) ((x) << 13) > +#define YHGCH_CRT_DISP_CTL_VSYNC_PHASE_MASK 0x2000 > + > +#define YHGCH_CRT_DISP_CTL_HSYNC_PHASE(x) ((x) << 12) > +#define YHGCH_CRT_DISP_CTL_HSYNC_PHASE_MASK 0x1000 > + > +#define YHGCH_CRT_DISP_CTL_TIMING(x) ((x) << 8) > +#define YHGCH_CRT_DISP_CTL_TIMING_MASK 0x100 > + > +#define YHGCH_CRT_DISP_CTL_PLANE(x) ((x) << 2) > +#define YHGCH_CRT_DISP_CTL_PLANE_MASK 4 > + > +#define YHGCH_CRT_DISP_CTL_FORMAT(x) ((x) << 0) > +#define YHGCH_CRT_DISP_CTL_FORMAT_MASK 0x03 > + > +#define YHGCH_CRT_FB_ADDRESS 0x080204 > + > +#define YHGCH_CRT_FB_WIDTH 0x080208 > +#define YHGCH_CRT_FB_WIDTH_WIDTH(x) ((x) << 16) > +#define YHGCH_CRT_FB_WIDTH_WIDTH_MASK 0x3FFF0000 > +#define YHGCH_CRT_FB_WIDTH_OFFS(x) ((x) << 0) > +#define YHGCH_CRT_FB_WIDTH_OFFS_MASK 0x3FFF > + > +#define YHGCH_CRT_HORZ_TOTAL 0x08020C > +#define YHGCH_CRT_HORZ_TOTAL_TOTAL(x) ((x) << 16) > +#define YHGCH_CRT_HORZ_TOTAL_TOTAL_MASK 0xFFF0000 > + > +#define YHGCH_CRT_HORZ_TOTAL_DISP_END(x) ((x) << 0) > +#define YHGCH_CRT_HORZ_TOTAL_DISP_END_MASK 0xFFF > + > +#define YHGCH_CRT_HORZ_SYNC 0x080210 > +#define YHGCH_CRT_HORZ_SYNC_WIDTH(x) ((x) << 16) > +#define YHGCH_CRT_HORZ_SYNC_WIDTH_MASK 0xFF0000 > + > +#define YHGCH_CRT_HORZ_SYNC_START(x) ((x) << 0) > +#define YHGCH_CRT_HORZ_SYNC_START_MASK 0xFFF > + > +#define YHGCH_CRT_VERT_TOTAL 0x080214 > +#define YHGCH_CRT_VERT_TOTAL_TOTAL(x) ((x) << 16) > +#define YHGCH_CRT_VERT_TOTAL_TOTAL_MASK 0x7FFF0000 > + > +#define YHGCH_CRT_VERT_TOTAL_DISP_END(x) ((x) << 0) > +#define YHGCH_CRT_VERT_TOTAL_DISP_END_MASK 0x7FF > + > +#define YHGCH_CRT_VERT_SYNC 0x080218 > +#define YHGCH_CRT_VERT_SYNC_HEIGHT(x) ((x) << 16) > +#define YHGCH_CRT_VERT_SYNC_HEIGHT_MASK 0x3F0000 > + > +#define YHGCH_CRT_VERT_SYNC_START(x) ((x) << 0) > +#define YHGCH_CRT_VERT_SYNC_START_MASK 0x7FF > + > +/* Hardware Cursor */ > +#define YHGCH_HWC_ADDRESS 0x080230 > +#define YHGCH_HWC_ADDRESS_ENABLE(x) ((x) << 31) > +#define YHGCH_HWC_ADDRESS_ENABLE_MASK 0x80000000 > +#define YHGCH_HWC_ADDRESS_ADDRESS(x) ((x) << 0) > +#define YHGCH_HWC_ADDRESS_ADDRESS_MASK 0xFFFFFFF > + > +#define YHGCH_HWC_LOCATION 0x080234 > +#define YHGCH_HWC_LOCATION_TOP(x) ((x) << 27) > +#define YHGCH_HWC_LOCATION_TOP_MASK 0x8000000 > +#define YHGCH_HWC_LOCATION_Y(x) ((x) << 16) > +#define YHGCH_HWC_LOCATION_Y_MASK 0x7FF0000 > +#define YHGCH_HWC_LOCATION_LEFT(x) ((x) << 11) > +#define YHGCH_HWC_LOCATION_LEFT_MASK 0x800 > +#define YHGCH_HWC_LOCATION_X(x) ((x) << 0) > +#define YHGCH_HWC_LOCATION_X_MASK 0x7FF > + > +#define YHGCH_HWC_COLOR_12 0x080238 > +#define YHGCH_HWC_COLOR_12_2_RGB(x) ((x) << 16) > +#define YHGCH_HWC_COLOR_12_2_RGB_MASK 0xFFFF0000 > +#define YHGCH_HWC_COLOR_12_1_RGB(x) ((x) << 0) > +#define YHGCH_HWC_COLOR_12_1_RGB_MASK 0xFFFF > + > +#define YHGCH_HWC_COLOR_3 0x08023C > +#define YHGCH_HWC_COLOR_3_RGB(x) ((x) << 0) > +#define YHGCH_HWC_COLOR_3_RGB_MASK 0xFFFF > + > +/* Auto Centering */ > +#define YHGCH_CRT_AUTO_CENTERING_TL 0x080280 > +#define YHGCH_CRT_AUTO_CENTERING_TL_TOP(x) ((x) << 16) > +#define YHGCH_CRT_AUTO_CENTERING_TL_TOP_MASK 0x7FF0000 > + > +#define YHGCH_CRT_AUTO_CENTERING_TL_LEFT(x) ((x) << 0) > +#define YHGCH_CRT_AUTO_CENTERING_TL_LEFT_MASK 0x7FF > + > +#define YHGCH_CRT_AUTO_CENTERING_BR 0x080284 > +#define YHGCH_CRT_AUTO_CENTERING_BR_BOTTOM(x) ((x) << 16) > +#define YHGCH_CRT_AUTO_CENTERING_BR_BOTTOM_MASK 0x7FF0000 > + > +#define YHGCH_CRT_AUTO_CENTERING_BR_RIGHT(x) ((x) << 0) > +#define YHGCH_CRT_AUTO_CENTERING_BR_RIGHT_MASK 0x7FF > + > +/* register to control panel output */ > +#define YHGCH_DISPLAY_CONTROL_HISILE 0x80288 > +#define YHGCH_DISPLAY_CONTROL_FPVDDEN(x) ((x) << 0) > +#define YHGCH_DISPLAY_CONTROL_PANELDATE(x) ((x) << 1) > +#define YHGCH_DISPLAY_CONTROL_FPEN(x) ((x) << 2) > +#define YHGCH_DISPLAY_CONTROL_VBIASEN(x) ((x) << 3) > + > +#define YHGCH_RAW_INTERRUPT 0x80290 > +#define YHGCH_RAW_INTERRUPT_VBLANK(x) ((x) << 2) > +#define YHGCH_RAW_INTERRUPT_VBLANK_MASK 0x4 > + > +#define YHGCH_RAW_INTERRUPT_EN 0x80298 > +#define YHGCH_RAW_INTERRUPT_EN_VBLANK(x) ((x) << 2) > +#define YHGCH_RAW_INTERRUPT_EN_VBLANK_MASK 0x4 > + > +/* register and values for PLL control */ > +#define CRT_PLL1_NS 0x802a8 > +#define CRT_PLL1_NS_OUTER_BYPASS(x) ((x) << 30) > +#define CRT_PLL1_NS_INTER_BYPASS(x) ((x) << 29) > +#define CRT_PLL1_NS_POWERON(x) ((x) << 24) > + > +#define CRT_PLL1_NS_25MHZ 0x00006691 //640x480 > +#define CRT_PLL1_NS_40MHZ 0x00004580 //800x600 > +#define CRT_PLL1_NS_65MHZ 0x00002568 //1024x768 > +#define CRT_PLL1_NS_83MHZ 0x000027bb //1280x800 > +#define CRT_PLL1_NS_106MHZ 0x000027ef //1440x900 > +#define CRT_PLL1_NS_108MHZ 0x000027f2 //1280x1024 > +#define CRT_PLL1_NS_146MHZ 0x00001575 //1680x1050 > +#define CRT_PLL1_NS_148MHZ 0x0000145f //1920x1080 > +#define CRT_PLL1_NS_193MHZ 0x000018f7 //1920x1200 > + > +#define CRT_PLL2_NS 0x802ac > +#define CRT_PLL2_NS_25MHZ 0x0 > +#define CRT_PLL2_NS_40MHZ 0x0 > +#define CRT_PLL2_NS_65MHZ 0x0 > +#define CRT_PLL2_NS_83MHZ 0x0 > +#define CRT_PLL2_NS_106MHZ 0x0 > +#define CRT_PLL2_NS_108MHZ 0x0 > +#define CRT_PLL2_NS_146MHZ 0x0 > +#define CRT_PLL2_NS_148MHZ 0x0 > +#define CRT_PLL2_NS_193MHZ 0x0 > + > +#define YHGCH_FIELD(field, value) (field(value) & field##_MASK) > +#endif > diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_vdac.c b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_vdac.c > new file mode 100644 > index 000000000000..5811a2608722 > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_vdac.c > @@ -0,0 +1,110 @@ > +// SPDX-License-Identifier: GPL-2.0 > + > +#include <linux/io.h> > + > +#include <drm/drm_atomic_helper.h> > +#include <drm/drm_edid.h> > +#include <drm/drm_probe_helper.h> > +#include <drm/drm_print.h> > +#include <drm/drm_simple_kms_helper.h> > + > +#include "yhgch_drm_drv.h" > +#include "yhgch_drm_regs.h" > + > +static int yhgch_connector_get_modes(struct drm_connector *connector) > +{ > + int count; > + void *edid; > + struct yhgch_connector *yhgch_connector = to_yhgch_connector(connector); > + > + edid = drm_get_edid(connector, &yhgch_connector->adapter); > + if (edid) { > + drm_connector_update_edid_property(connector, edid); > + count = drm_add_edid_modes(connector, edid); > + if (count) > + goto out; > + } > + > + count = drm_add_modes_noedid(connector, > + connector->dev->mode_config.max_width, > + connector->dev->mode_config.max_height); > + drm_set_preferred_mode(connector, 1024, 768); > + > +out: > + kfree(edid); > + return count; > +} IIRC I mentioned the drm_connector_helper_get_modes() function. Why didn't you use it in your driver? Why do you set default modes if no EDID could be retrieved? Answer:Because we want to be able to set the default mode even when the EDID cannot be read. However, the drm_connector_helper_get_modes() function is unable to achieve this. > + > +static const struct drm_connector_helper_funcs > + yhgch_connector_helper_funcs = { > + .get_modes = yhgch_connector_get_modes, > + .detect_ctx = drm_connector_helper_detect_from_ddc, > +}; > + > +static const struct drm_connector_funcs yhgch_connector_funcs = { > + .fill_modes = drm_helper_probe_single_connector_modes, > + .destroy = drm_connector_cleanup, > + .reset = drm_atomic_helper_connector_reset, > + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, > + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, > +}; > + > +static void yhgch_encoder_mode_set(struct drm_encoder *encoder, > + struct drm_display_mode *mode, > + struct drm_display_mode *adj_mode) > +{ > + u32 reg; > + struct drm_device *dev = encoder->dev; > + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); > + > + reg = readl(priv->mmio + YHGCH_DISPLAY_CONTROL_HISILE); > + reg |= YHGCH_DISPLAY_CONTROL_FPVDDEN(1); > + reg |= YHGCH_DISPLAY_CONTROL_PANELDATE(1); > + reg |= YHGCH_DISPLAY_CONTROL_FPEN(1); > + reg |= YHGCH_DISPLAY_CONTROL_VBIASEN(1); > + writel(reg, priv->mmio + YHGCH_DISPLAY_CONTROL_HISILE); > +} > + > +static const struct drm_encoder_helper_funcs yhgch_encoder_helper_funcs = { > + .mode_set = yhgch_encoder_mode_set, > +}; > + > +int yhgch_vdac_init(struct yhgch_drm_private *priv) > +{ > + struct drm_device *dev = &priv->dev; > + struct yhgch_connector *yhgch_connector = &priv->connector; > + struct drm_encoder *encoder = &priv->encoder; > + struct drm_crtc *crtc = &priv->crtc; > + struct drm_connector *connector = &yhgch_connector->base; > + int ret; > + > + ret = yhgch_ddc_create(dev, yhgch_connector); > + if (ret) { > + drm_err(dev, "failed to create ddc: %d\n", ret); > + return ret; > + } > + > + encoder->possible_crtcs = drm_crtc_mask(crtc); > + ret = drm_simple_encoder_init(dev, encoder, DRM_MODE_ENCODER_DAC); drm_simple_encoder_init() is deprecated. Please use the regular drm_encoder_init() with your own copy of the drm_encoder_funcs. Answer:We have replaced it with the drmm_encoder_init function. Best regards Thomas > + if (ret) { > + drm_err(dev, "failed to init encoder: %d\n", ret); > + return ret; > + } > + > + drm_encoder_helper_add(encoder, &yhgch_encoder_helper_funcs); > + > + ret = drm_connector_init_with_ddc(dev, connector, > + &yhgch_connector_funcs, > + DRM_MODE_CONNECTOR_VGA, > + &yhgch_connector->adapter); > + if (ret) { > + drm_err(dev, "failed to init connector: %d\n", ret); > + return ret; > + } > + drm_connector_helper_add(connector, &yhgch_connector_helper_funcs); > + connector->polled = DRM_CONNECTOR_POLL_CONNECT | DRM_CONNECTOR_POLL_DISCONNECT; > + > + drm_connector_attach_encoder(connector, encoder); > + > + return 0; > +} Chu Guangqing (1): [DRIVER] gpu: drm: add support for Yhgc ZX1000 soc chipset MAINTAINERS | 5 + drivers/gpu/drm/Kconfig | 2 + drivers/gpu/drm/Makefile | 1 + drivers/gpu/drm/yhgch/Kconfig | 3 + drivers/gpu/drm/yhgch/Makefile | 1 + drivers/gpu/drm/yhgch/yhgch-drm/Kconfig | 12 + drivers/gpu/drm/yhgch/yhgch-drm/Makefile | 5 + .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_de.c | 405 ++++++++++++++++++ .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.c | 312 ++++++++++++++ .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.h | 54 +++ .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_i2c.c | 108 +++++ .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_regs.h | 209 +++++++++ .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_vdac.c | 111 +++++ 13 files changed, 1228 insertions(+) create mode 100644 drivers/gpu/drm/yhgch/Kconfig create mode 100644 drivers/gpu/drm/yhgch/Makefile create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/Kconfig create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/Makefile create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_de.c create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.c create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.h create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_i2c.c create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_regs.h create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_vdac.c -- 2.43.5 ^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH v3 1/1] [DRIVER] gpu: drm: add support for Yhgc ZX1000 soc chipset 2025-09-10 2:23 ` [PATCH v3 0/1] " Chu Guangqing @ 2025-09-10 2:23 ` Chu Guangqing 2025-09-11 0:44 ` Dmitry Baryshkov 2025-09-11 7:25 ` Thomas Zimmermann 0 siblings, 2 replies; 22+ messages in thread From: Chu Guangqing @ 2025-09-10 2:23 UTC (permalink / raw) To: tzimmermann, maarten.lankhorst, mripard, airlied, simona Cc: linux-kernel, dri-devel, Chu Guangqing add support for Yhgc BMC soc chipset Signed-off-by: Chu Guangqing <chuguangqing@inspur.com> --- MAINTAINERS | 5 + drivers/gpu/drm/Kconfig | 2 + drivers/gpu/drm/Makefile | 1 + drivers/gpu/drm/yhgch/Kconfig | 3 + drivers/gpu/drm/yhgch/Makefile | 1 + drivers/gpu/drm/yhgch/yhgch-drm/Kconfig | 12 + drivers/gpu/drm/yhgch/yhgch-drm/Makefile | 5 + .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_de.c | 405 ++++++++++++++++++ .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.c | 312 ++++++++++++++ .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.h | 54 +++ .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_i2c.c | 108 +++++ .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_regs.h | 209 +++++++++ .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_vdac.c | 111 +++++ 13 files changed, 1228 insertions(+) create mode 100644 drivers/gpu/drm/yhgch/Kconfig create mode 100644 drivers/gpu/drm/yhgch/Makefile create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/Kconfig create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/Makefile create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_de.c create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.c create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.h create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_i2c.c create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_regs.h create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_vdac.c diff --git a/MAINTAINERS b/MAINTAINERS index 10614ca41ed0..c79d9361fa81 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -27744,6 +27744,11 @@ S: Maintained F: Documentation/input/devices/yealink.rst F: drivers/input/misc/yealink.* +YHGC DRM DRIVER +M: chuguangqing <chuguangqing@inspur.com> +S: Maintained +F: drivers/gpu/drm/yhgch + Z8530 DRIVER FOR AX.25 M: Joerg Reuter <jreuter@yaina.de> L: linux-hams@vger.kernel.org diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index f7ea8e895c0c..8e0b1d12c81f 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -396,6 +396,8 @@ source "drivers/gpu/drm/sprd/Kconfig" source "drivers/gpu/drm/imagination/Kconfig" +source "drivers/gpu/drm/yhgch/Kconfig" + config DRM_HYPERV tristate "DRM Support for Hyper-V synthetic video device" depends on DRM && PCI && HYPERV diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile index 4dafbdc8f86a..f344e0173b29 100644 --- a/drivers/gpu/drm/Makefile +++ b/drivers/gpu/drm/Makefile @@ -231,6 +231,7 @@ obj-y += solomon/ obj-$(CONFIG_DRM_SPRD) += sprd/ obj-$(CONFIG_DRM_LOONGSON) += loongson/ obj-$(CONFIG_DRM_POWERVR) += imagination/ +obj-$(CONFIG_DRM_YHGCH) += yhgch/ # Ensure drm headers are self-contained and pass kernel-doc hdrtest-files := \ diff --git a/drivers/gpu/drm/yhgch/Kconfig b/drivers/gpu/drm/yhgch/Kconfig new file mode 100644 index 000000000000..4d2f473dbb4a --- /dev/null +++ b/drivers/gpu/drm/yhgch/Kconfig @@ -0,0 +1,3 @@ +# License: GPL-2.0 + +source "drivers/gpu/drm/yhgch/yhgch-drm/Kconfig" diff --git a/drivers/gpu/drm/yhgch/Makefile b/drivers/gpu/drm/yhgch/Makefile new file mode 100644 index 000000000000..c5229239002b --- /dev/null +++ b/drivers/gpu/drm/yhgch/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_DRM_YHGCH) += yhgch-drm/ diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/Kconfig b/drivers/gpu/drm/yhgch/yhgch-drm/Kconfig new file mode 100644 index 000000000000..10d586bbe897 --- /dev/null +++ b/drivers/gpu/drm/yhgch/yhgch-drm/Kconfig @@ -0,0 +1,12 @@ +config DRM_YHGCH + tristate "DRM Support for Yhgch BMC" + depends on DRM && PCI && MMU + select DRM_CLIENT_SELECTION + select DRM_KMS_HELPER + select DRM_VRAM_HELPER + select DRM_TTM_HELPER + help + Choose this option if you have a Yhgch soc chipset. + If M is selected the module will be called yhgch - drm. + IF Y is selected the module will be built into the kernel. + IF N is selected the module will be excluded from the kernel. diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/Makefile b/drivers/gpu/drm/yhgch/yhgch-drm/Makefile new file mode 100644 index 000000000000..e9cc4dc6568d --- /dev/null +++ b/drivers/gpu/drm/yhgch/yhgch-drm/Makefile @@ -0,0 +1,5 @@ +yhgch-drm-y := yhgch_drm_drv.o yhgch_drm_de.o yhgch_drm_vdac.o yhgch_drm_i2c.o + +obj-$(CONFIG_DRM_YHGCH) += yhgch-drm.o + + diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_de.c b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_de.c new file mode 100644 index 000000000000..09b8d6fd1625 --- /dev/null +++ b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_de.c @@ -0,0 +1,405 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include <linux/delay.h> +#include <drm/drm_atomic.h> +#include <drm/drm_atomic_helper.h> +#include <drm/drm_fourcc.h> + +#include <drm/drm_gem_vram_helper.h> +#include <drm/drm_vblank.h> + +#include "yhgch_drm_drv.h" +#include "yhgch_drm_regs.h" + +struct yhgch_dislay_pll_config { + u64 hdisplay; + u64 vdisplay; + u32 pll1_config_value; + u32 pll2_config_value; +}; + +static const struct yhgch_dislay_pll_config yhgch_pll_table[] = { + { 640, 480, CRT_PLL1_NS_25MHZ, CRT_PLL2_NS_25MHZ }, + { 800, 600, CRT_PLL1_NS_40MHZ, CRT_PLL2_NS_40MHZ }, + { 1024, 768, CRT_PLL1_NS_65MHZ, CRT_PLL2_NS_65MHZ }, + { 1280, 1024, CRT_PLL1_NS_108MHZ, CRT_PLL2_NS_108MHZ }, + { 1920, 1080, CRT_PLL1_NS_148MHZ, CRT_PLL2_NS_148MHZ }, +}; + +static int yhgch_plane_atomic_check(struct drm_plane *plane, + struct drm_atomic_state *state) +{ + struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state, + plane); + struct drm_framebuffer *fb = new_plane_state->fb; + struct drm_crtc_state *new_crtc_state = NULL; + int ret; + + if (!fb) + return 0; + + if (new_plane_state->crtc) + new_crtc_state = drm_atomic_get_new_crtc_state(state, new_plane_state->crtc); + + ret = drm_atomic_helper_check_plane_state(new_plane_state, new_crtc_state, + DRM_PLANE_NO_SCALING, + DRM_PLANE_NO_SCALING, + false, true); + if (ret) + return ret; + else if (!new_plane_state->visible) + return 0; + + if (new_plane_state->crtc_x + new_plane_state->crtc_w > + new_crtc_state->adjusted_mode.hdisplay || + new_plane_state->crtc_y + new_plane_state->crtc_h > + new_crtc_state->adjusted_mode.vdisplay) { + drm_dbg_atomic(plane->dev, "visible portion of plane is invalid\n"); + return -EINVAL; + } + + if (new_plane_state->fb->pitches[0] % 16 != 0) { + drm_dbg_atomic(plane->dev, "wrong stride with 16-byte aligned\n"); + return -EINVAL; + } + + return 0; +} + +static void yhgch_plane_atomic_update(struct drm_plane *plane, + struct drm_atomic_state *state) +{ + struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state, + plane); + u32 reg; + s64 gpu_addr = 0; + u32 line_l; + struct yhgch_drm_private *priv = to_yhgch_drm_private(plane->dev); + struct drm_gem_vram_object *gbo; + + if (!new_state->fb) + return; + + gbo = drm_gem_vram_of_gem(new_state->fb->obj[0]); + + gpu_addr = drm_gem_vram_offset(gbo); + if (gpu_addr < 0) + return; + + writel(gpu_addr, priv->mmio + YHGCH_CRT_FB_ADDRESS); + + reg = new_state->fb->width * (new_state->fb->format->cpp[0]); + + line_l = new_state->fb->pitches[0]; + writel(YHGCH_FIELD(YHGCH_CRT_FB_WIDTH_WIDTH, reg) | + YHGCH_FIELD(YHGCH_CRT_FB_WIDTH_OFFS, line_l), + priv->mmio + YHGCH_CRT_FB_WIDTH); + + /* SET PIXEL FORMAT */ + reg = readl(priv->mmio + YHGCH_CRT_DISP_CTL); + reg &= ~YHGCH_CRT_DISP_CTL_FORMAT_MASK; + reg |= YHGCH_FIELD(YHGCH_CRT_DISP_CTL_FORMAT, + new_state->fb->format->cpp[0] * 8 / 16); + writel(reg, priv->mmio + YHGCH_CRT_DISP_CTL); +} + +static const u32 channel_formats1[] = { + DRM_FORMAT_RGB565, DRM_FORMAT_RGB888, + DRM_FORMAT_XRGB8888, +}; + +static struct drm_plane_funcs yhgch_plane_funcs = { + .update_plane = drm_atomic_helper_update_plane, + .disable_plane = drm_atomic_helper_disable_plane, + .destroy = drm_plane_cleanup, + .reset = drm_atomic_helper_plane_reset, + .atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_plane_destroy_state, +}; + +static const struct drm_plane_helper_funcs yhgch_plane_helper_funcs = { + DRM_GEM_VRAM_PLANE_HELPER_FUNCS, + .atomic_check = yhgch_plane_atomic_check, + .atomic_update = yhgch_plane_atomic_update, +}; + +static void yhgch_crtc_dpms(struct drm_crtc *crtc, u32 dpms) +{ + struct yhgch_drm_private *priv = to_yhgch_drm_private(crtc->dev); + u32 reg; + + reg = readl(priv->mmio + YHGCH_CRT_DISP_CTL); + reg &= ~YHGCH_CRT_DISP_CTL_DPMS_MASK; + reg |= YHGCH_FIELD(YHGCH_CRT_DISP_CTL_DPMS, dpms); + reg &= ~YHGCH_CRT_DISP_CTL_TIMING_MASK; + if (dpms == YHGCH_CRT_DPMS_ON) + reg |= YHGCH_CRT_DISP_CTL_TIMING(1); + writel(reg, priv->mmio + YHGCH_CRT_DISP_CTL); +} + +static void yhgch_crtc_atomic_enable(struct drm_crtc *crtc, + struct drm_atomic_state *old_state) +{ + u32 reg; + struct yhgch_drm_private *priv = to_yhgch_drm_private(crtc->dev); + + yhgch_set_power_mode(priv, YHGCH_PW_MODE_CTL_MODE_MODE0); + + /* Enable display power gate & LOCALMEM power gate */ + reg = readl(priv->mmio + YHGCH_CURRENT_GATE); + reg &= ~YHGCH_CURR_GATE_LOCALMEM_MASK; + reg &= ~YHGCH_CURR_GATE_DISPLAY_MASK; + reg |= YHGCH_CURR_GATE_LOCALMEM(1); + reg |= YHGCH_CURR_GATE_DISPLAY(1); + yhgch_set_current_gate(priv, reg); + yhgch_crtc_dpms(crtc, YHGCH_CRT_DPMS_ON); +} + +static void yhgch_crtc_atomic_disable(struct drm_crtc *crtc, + struct drm_atomic_state *old_state) +{ + u32 reg; + struct yhgch_drm_private *priv = to_yhgch_drm_private(crtc->dev); + + yhgch_crtc_dpms(crtc, YHGCH_CRT_DPMS_OFF); + + yhgch_set_power_mode(priv, YHGCH_PW_MODE_CTL_MODE_SLEEP); + + /* Enable display power gate & LOCALMEM power gate */ + reg = readl(priv->mmio + YHGCH_CURRENT_GATE); + reg &= ~YHGCH_CURR_GATE_LOCALMEM_MASK; + reg &= ~YHGCH_CURR_GATE_DISPLAY_MASK; + reg |= YHGCH_CURR_GATE_LOCALMEM(0); + reg |= YHGCH_CURR_GATE_DISPLAY(0); + yhgch_set_current_gate(priv, reg); +} + +static enum drm_mode_status +yhgch_crtc_mode_valid(struct drm_crtc *crtc, + const struct drm_display_mode *mode) +{ + size_t i = 0; + int vrefresh = drm_mode_vrefresh(mode); + + if (vrefresh < 59 || vrefresh > 61) + return MODE_NOCLOCK; + + for (i = 0; i < ARRAY_SIZE(yhgch_pll_table); i++) { + if (yhgch_pll_table[i].hdisplay == mode->hdisplay && + yhgch_pll_table[i].vdisplay == mode->vdisplay) + return MODE_OK; + } + + return MODE_BAD; +} + +static void set_vclock_yhgch(struct drm_device *dev, u64 pll) +{ + u32 val; + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); + + val = readl(priv->mmio + CRT_PLL1_NS); + val &= ~(CRT_PLL1_NS_OUTER_BYPASS(1)); + writel(val, priv->mmio + CRT_PLL1_NS); + + val = CRT_PLL1_NS_INTER_BYPASS(1) | CRT_PLL1_NS_POWERON(1); + writel(val, priv->mmio + CRT_PLL1_NS); + + writel(pll, priv->mmio + CRT_PLL1_NS); + + usleep_range(1000, 2000); + + val = pll & ~(CRT_PLL1_NS_POWERON(1)); + writel(val, priv->mmio + CRT_PLL1_NS); + + usleep_range(1000, 2000); + + val &= ~(CRT_PLL1_NS_INTER_BYPASS(1)); + writel(val, priv->mmio + CRT_PLL1_NS); + + usleep_range(1000, 2000); + + val |= CRT_PLL1_NS_OUTER_BYPASS(1); + writel(val, priv->mmio + CRT_PLL1_NS); +} + +static void get_pll_config(u64 x, u64 y, u32 *pll1, u32 *pll2) +{ + size_t i; + size_t count = ARRAY_SIZE(yhgch_pll_table); + + for (i = 0; i < count; i++) { + if (yhgch_pll_table[i].hdisplay == x && + yhgch_pll_table[i].vdisplay == y) { + *pll1 = yhgch_pll_table[i].pll1_config_value; + *pll2 = yhgch_pll_table[i].pll2_config_value; + return; + } + } + + /* if found none, we use default value */ + *pll1 = CRT_PLL1_NS_25MHZ; + *pll2 = CRT_PLL2_NS_25MHZ; +} + +/* + * This function takes care the extra registers and bit fields required to + * setup a mode in board. + * Explanation about Display Control register: + * FPGA only supports 7 predefined pixel clocks, and clock select is + * in bit 4:0 of new register 0x802a8. + */ +static u32 display_ctrl_adjust(struct drm_device *dev, + struct drm_display_mode *mode, + u32 ctrl) +{ + u64 w, h; + u32 pll1; /* bit[31:0] of PLL */ + u32 pll2; /* bit[63:32] of PLL */ + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); + + w = mode->hdisplay; + h = mode->vdisplay; + + get_pll_config(w, h, &pll1, &pll2); + writel(pll2, priv->mmio + CRT_PLL2_NS); + set_vclock_yhgch(dev, pll1); + + /* + * yhgch has to set up the top-left and bottom-right + * registers as well. + * Note that normal chip only use those two register for + * auto-centering mode. + */ + writel(YHGCH_FIELD(YHGCH_CRT_AUTO_CENTERING_TL_TOP, 0) | + YHGCH_FIELD(YHGCH_CRT_AUTO_CENTERING_TL_LEFT, 0), + priv->mmio + YHGCH_CRT_AUTO_CENTERING_TL); + + writel(YHGCH_FIELD(YHGCH_CRT_AUTO_CENTERING_BR_BOTTOM, h - 1) | + YHGCH_FIELD(YHGCH_CRT_AUTO_CENTERING_BR_RIGHT, w - 1), + priv->mmio + YHGCH_CRT_AUTO_CENTERING_BR); + + /* + * Assume common fields in ctrl have been properly set before + * calling this function. + * This function only sets the extra fields in ctrl. + */ + + /* Set bit 25 of display controller: Select CRT or VGA clock */ + ctrl &= ~YHGCH_CRT_DISP_CTL_CRTSELECT_MASK; + ctrl &= ~YHGCH_CRT_DISP_CTL_CLOCK_PHASE_MASK; + + ctrl |= YHGCH_CRT_DISP_CTL_CRTSELECT(YHGCH_CRTSELECT_CRT); + + /* clock_phase_polarity is 0 */ + ctrl |= YHGCH_CRT_DISP_CTL_CLOCK_PHASE(0); + ctrl |= YHGCH_FIELD(YHGCH_CRT_DISP_CTL_FORMAT, 2); + + writel(ctrl, priv->mmio + YHGCH_CRT_DISP_CTL); + + return ctrl; +} + +static void yhgch_crtc_mode_set_nofb(struct drm_crtc *crtc) +{ + u32 val; + struct drm_display_mode *mode = &crtc->state->mode; + struct drm_device *dev = crtc->dev; + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); + u32 width = mode->hsync_end - mode->hsync_start; + u32 height = mode->vsync_end - mode->vsync_start; + + //writel(format_pll_reg(), priv->mmio + YHGCH_CRT_PLL_CTRL); + writel(YHGCH_FIELD(YHGCH_CRT_HORZ_TOTAL_TOTAL, mode->htotal - 1) | + YHGCH_FIELD(YHGCH_CRT_HORZ_TOTAL_DISP_END, mode->hdisplay - 1), + priv->mmio + YHGCH_CRT_HORZ_TOTAL); + + writel(YHGCH_FIELD(YHGCH_CRT_HORZ_SYNC_WIDTH, width) | + YHGCH_FIELD(YHGCH_CRT_HORZ_SYNC_START, mode->hsync_start - 1), + priv->mmio + YHGCH_CRT_HORZ_SYNC); + + writel(YHGCH_FIELD(YHGCH_CRT_VERT_TOTAL_TOTAL, mode->vtotal - 1) | + YHGCH_FIELD(YHGCH_CRT_VERT_TOTAL_DISP_END, mode->vdisplay - 1), + priv->mmio + YHGCH_CRT_VERT_TOTAL); + + writel(YHGCH_FIELD(YHGCH_CRT_VERT_SYNC_HEIGHT, height) | + YHGCH_FIELD(YHGCH_CRT_VERT_SYNC_START, mode->vsync_start - 1), + priv->mmio + YHGCH_CRT_VERT_SYNC); + + val = YHGCH_FIELD(YHGCH_CRT_DISP_CTL_VSYNC_PHASE, 0); + val |= YHGCH_FIELD(YHGCH_CRT_DISP_CTL_HSYNC_PHASE, 0); + val |= YHGCH_CRT_DISP_CTL_TIMING(1); + val |= YHGCH_CRT_DISP_CTL_PLANE(1); + + display_ctrl_adjust(dev, mode, val); +} + +static void yhgch_crtc_atomic_begin(struct drm_crtc *crtc, + struct drm_atomic_state *old_state) +{ + u32 reg; + struct drm_device *dev = crtc->dev; + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); + + yhgch_set_power_mode(priv, YHGCH_PW_MODE_CTL_MODE_MODE0); + + /* Enable display power gate & LOCALMEM power gate */ + reg = readl(priv->mmio + YHGCH_CURRENT_GATE); + reg &= ~YHGCH_CURR_GATE_DISPLAY_MASK; + reg &= ~YHGCH_CURR_GATE_LOCALMEM_MASK; + reg |= YHGCH_CURR_GATE_DISPLAY(1); + reg |= YHGCH_CURR_GATE_LOCALMEM(1); + yhgch_set_current_gate(priv, reg); + + /* We can add more initialization as needed. */ +} + +static const struct drm_crtc_funcs yhgch_crtc_funcs = { + .page_flip = drm_atomic_helper_page_flip, + .set_config = drm_atomic_helper_set_config, + .destroy = drm_crtc_cleanup, + .reset = drm_atomic_helper_crtc_reset, + .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state, + +}; + +static const struct drm_crtc_helper_funcs yhgch_crtc_helper_funcs = { + .mode_set_nofb = yhgch_crtc_mode_set_nofb, + .atomic_begin = yhgch_crtc_atomic_begin, + .atomic_enable = yhgch_crtc_atomic_enable, + .atomic_disable = yhgch_crtc_atomic_disable, + .mode_valid = yhgch_crtc_mode_valid, +}; + +int yhgch_de_init(struct yhgch_drm_private *priv) +{ + struct drm_device *dev = &priv->dev; + struct drm_crtc *crtc = &priv->crtc; + struct drm_plane *plane = &priv->primary_plane; + int ret; + + ret = drm_universal_plane_init(dev, plane, 1, &yhgch_plane_funcs, + channel_formats1, + ARRAY_SIZE(channel_formats1), + NULL, + DRM_PLANE_TYPE_PRIMARY, + NULL); + if (ret) { + drm_err(dev, "failed to init plane: %d\n", ret); + return ret; + } + + drm_plane_helper_add(plane, &yhgch_plane_helper_funcs); + + ret = drm_crtc_init_with_planes(dev, crtc, plane, + NULL, &yhgch_crtc_funcs, NULL); + if (ret) { + drm_err(dev, "failed to init crtc: %d\n", ret); + return ret; + } + + drm_crtc_helper_add(crtc, &yhgch_crtc_helper_funcs); + + return 0; +} diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.c b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.c new file mode 100644 index 000000000000..276a0e129058 --- /dev/null +++ b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.c @@ -0,0 +1,312 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include "yhgch_drm_drv.h" + +#include <linux/module.h> +#include <linux/pci.h> + +#include <linux/aperture.h> +#include <drm/clients/drm_client_setup.h> + +#include <drm/drm_atomic_helper.h> +#include <drm/drm_drv.h> +#include <drm/drm_fbdev_ttm.h> + +#include <drm/drm_gem_framebuffer_helper.h> +#include <drm/drm_gem_vram_helper.h> +#include <drm/drm_managed.h> +#include <drm/drm_module.h> +#include <drm/drm_vblank.h> + +#include <drm/drm_probe_helper.h> + +#include "yhgch_drm_drv.h" +#include "yhgch_drm_regs.h" + +#define MEM_SIZE_RESERVE4KVM 0x200000 + +DEFINE_DRM_GEM_FOPS(yhgch_fops); + +int yhgch_dumb_create(struct drm_file *file, struct drm_device *dev, + struct drm_mode_create_dumb *args) +{ + return drm_gem_vram_fill_create_dumb(file, dev, 0, 16, args); +} + +static struct drm_driver yhgch_driver = { + .driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC, + .fops = &yhgch_fops, + .name = "yhgch", + .desc = "yhgch drm driver", + .major = 3, + .minor = 1, + .debugfs_init = drm_vram_mm_debugfs_init, + .dumb_create = yhgch_dumb_create, + .dumb_map_offset = drm_gem_ttm_dumb_map_offset, + DRM_FBDEV_TTM_DRIVER_OPS, +}; + +static int __maybe_unused yhgch_pm_suspend(struct device *dev) +{ + struct drm_device *drm_dev = dev_get_drvdata(dev); + + return drm_mode_config_helper_suspend(drm_dev); +} + +static int __maybe_unused yhgch_pm_resume(struct device *dev) +{ + struct drm_device *drm_dev = dev_get_drvdata(dev); + + return drm_mode_config_helper_resume(drm_dev); +} + +static const struct dev_pm_ops yhgch_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(yhgch_pm_suspend, + yhgch_pm_resume) +}; + +static const struct drm_mode_config_funcs yhgch_mode_funcs = { + .mode_valid = drm_vram_helper_mode_valid, + .atomic_check = drm_atomic_helper_check, + .atomic_commit = drm_atomic_helper_commit, + .fb_create = drm_gem_fb_create, +}; + +static int yhgch_kms_init(struct yhgch_drm_private *priv) +{ + struct drm_device *dev = &priv->dev; + int ret; + + ret = drmm_mode_config_init(dev); + if (ret) + return ret; + + priv->dev.mode_config.min_width = 0; + priv->dev.mode_config.min_height = 0; + priv->dev.mode_config.max_width = 1920; + priv->dev.mode_config.max_height = 1200; + dev->mode_config.preferred_depth = 24; + priv->dev.mode_config.prefer_shadow = 1; + priv->dev.mode_config.funcs = &yhgch_mode_funcs; + + ret = yhgch_de_init(priv); + if (ret) { + drm_err(dev, "failed to init de: %d\n", ret); + return ret; + } + + ret = yhgch_vdac_init(priv); + if (ret) { + drm_err(dev, "failed to init vdac: %d\n", ret); + return ret; + } + drm_kms_helper_poll_init(dev); + + return 0; +} + +/* + * It can operate in one of three modes: 0, 1 or Sleep. + */ +void yhgch_set_power_mode(struct yhgch_drm_private *priv, u32 power_mode) +{ + unsigned int control_value = 0; + void __iomem *mmio = priv->mmio; + u32 input = 1; + + if (power_mode > YHGCH_PW_MODE_CTL_MODE_SLEEP) + return; + + if (power_mode == YHGCH_PW_MODE_CTL_MODE_SLEEP) + input = 0; + + control_value = readl(mmio + YHGCH_POWER_MODE_CTRL); + control_value &= ~(YHGCH_PW_MODE_CTL_MODE_MASK | + YHGCH_PW_MODE_CTL_OSC_INPUT_MASK); + control_value |= YHGCH_FIELD(YHGCH_PW_MODE_CTL_MODE, power_mode); + control_value |= YHGCH_FIELD(YHGCH_PW_MODE_CTL_OSC_INPUT, input); + writel(control_value, mmio + YHGCH_POWER_MODE_CTRL); +} + +void yhgch_set_current_gate(struct yhgch_drm_private *priv, unsigned int gate) +{ + u32 gate_reg; + u32 mode; + void __iomem *mmio = priv->mmio; + + /* Get current power mode. */ + mode = (readl(mmio + YHGCH_POWER_MODE_CTRL) & + YHGCH_PW_MODE_CTL_MODE_MASK) >> YHGCH_PW_MODE_CTL_MODE_SHIFT; + + switch (mode) { + case YHGCH_PW_MODE_CTL_MODE_MODE0: + gate_reg = YHGCH_MODE0_GATE; + break; + + case YHGCH_PW_MODE_CTL_MODE_MODE1: + gate_reg = YHGCH_MODE1_GATE; + break; + + default: + gate_reg = YHGCH_MODE0_GATE; + break; + } + writel(gate, mmio + gate_reg); +} + +static void yhgch_hw_config(struct yhgch_drm_private *priv) +{ + u32 reg; + + /* On hardware reset, power mode 0 is default. */ + yhgch_set_power_mode(priv, YHGCH_PW_MODE_CTL_MODE_MODE0); + + /* Enable display power gate & LOCALMEM power gate */ + reg = readl(priv->mmio + YHGCH_CURRENT_GATE); + reg &= ~YHGCH_CURR_GATE_DISPLAY_MASK; + reg &= ~YHGCH_CURR_GATE_LOCALMEM_MASK; + reg |= YHGCH_CURR_GATE_DISPLAY(1); + reg |= YHGCH_CURR_GATE_LOCALMEM(1); + + yhgch_set_current_gate(priv, reg); + + /* + * Reset the memory controller. If the memory controller + * is not reset in chip,the system might hang when sw accesses + * the memory.The memory should be resetted after + * changing the MXCLK. + */ + reg = readl(priv->mmio + YHGCH_MISC_CTRL); + reg &= ~YHGCH_MSCCTL_LOCALMEM_RESET_MASK; + reg |= YHGCH_MSCCTL_LOCALMEM_RESET(0); + writel(reg, priv->mmio + YHGCH_MISC_CTRL); + + reg &= ~YHGCH_MSCCTL_LOCALMEM_RESET_MASK; + reg |= YHGCH_MSCCTL_LOCALMEM_RESET(1); + + writel(reg, priv->mmio + YHGCH_MISC_CTRL); +} + +static int yhgch_hw_map(struct yhgch_drm_private *priv) +{ + struct drm_device *dev = &priv->dev; + struct pci_dev *pdev = to_pci_dev(dev->dev); + resource_size_t ioaddr, iosize; + + ioaddr = pci_resource_start(pdev, 1); + iosize = pci_resource_len(pdev, 1); + priv->mmio = devm_ioremap(dev->dev, ioaddr, iosize); + if (!priv->mmio) { + drm_err(dev, "Cannot map mmio region\n"); + return -ENOMEM; + } + return 0; +} + +static int yhgch_hw_init(struct yhgch_drm_private *priv) +{ + int ret; + + ret = yhgch_hw_map(priv); + if (ret) + return ret; + yhgch_hw_config(priv); + return 0; +} + +static int yhgch_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct yhgch_drm_private *priv; + struct drm_device *dev; + int ret; + + ret = aperture_remove_conflicting_pci_devices(pdev, yhgch_driver.name); + + if (ret) + return ret; + + priv = devm_drm_dev_alloc(&pdev->dev, &yhgch_driver, + struct yhgch_drm_private, dev); + + if (IS_ERR(priv)) + return PTR_ERR(priv); + + dev = &priv->dev; + pci_set_drvdata(pdev, dev); + + ret = pcim_enable_device(pdev); + if (ret) { + drm_err(dev, "failed to enable pci device: %d\n", ret); + goto err_return; + } + + ret = yhgch_hw_init(priv); + if (ret) + goto err_unload; + ret = drmm_vram_helper_init(dev, pci_resource_start(pdev, 0), + pci_resource_len(pdev, 0)); + if (ret) { + drm_err(dev, "Error initializing VRAM MM; %d\n", ret); + goto err_unload; + } + ret = yhgch_kms_init(priv); + if (ret) + goto err_unload; + + ret = pci_enable_msi(pdev); + if (ret) + drm_warn(dev, "enabling MSI failed: %d\n", ret); + /* reset all the states of crtc/plane/encoder/connector */ + drm_mode_config_reset(dev); + + ret = drm_dev_register(dev, 0); + if (ret) { + drm_err(dev, "failed to register drv for userspace access: %d\n", + ret); + goto err_unload; + } + drm_client_setup(dev, NULL); + + return 0; + +err_unload: + drm_atomic_helper_shutdown(dev); +err_return: + return ret; +} + +static void yhgch_pci_remove(struct pci_dev *pdev) +{ + struct drm_device *dev = pci_get_drvdata(pdev); + + drm_dev_unregister(dev); + drm_atomic_helper_shutdown(dev); +} + +static void yhgch_pci_shutdown(struct pci_dev *pdev) +{ + drm_atomic_helper_shutdown(pci_get_drvdata(pdev)); +} + +static struct pci_device_id yhgch_pci_table[] = { + { 0x1bd4, 0x0750, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { 0, } +}; + +static struct pci_driver yhgch_pci_driver = { + .name = "yhgch-drm", + .id_table = yhgch_pci_table, + .probe = yhgch_pci_probe, + .remove = yhgch_pci_remove, + .shutdown = yhgch_pci_shutdown, + .driver.pm = &yhgch_pm_ops, +}; + +drm_module_pci_driver(yhgch_pci_driver); + +MODULE_DEVICE_TABLE(pci, yhgch_pci_table); +MODULE_AUTHOR(""); +MODULE_DESCRIPTION("DRM Driver for YhgchBMC"); +MODULE_LICENSE("GPL"); +MODULE_VERSION("3.1"); diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.h b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.h new file mode 100644 index 000000000000..8892d4ca0bae --- /dev/null +++ b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.h @@ -0,0 +1,54 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef YHGCH_DRM_DRV_H +#define YHGCH_DRM_DRV_H + +#include <linux/gpio/consumer.h> +#include <linux/i2c-algo-bit.h> +#include <linux/i2c.h> +#include <linux/version.h> +#include <drm/drm_framebuffer.h> +#include <drm/drm_encoder.h> + +struct yhgch_vdac { + struct drm_connector base; + struct i2c_adapter adapter; + struct i2c_algo_bit_data bit_data; +}; + +struct yhgch_drm_private { + /* hw */ + void __iomem *mmio; + + /* drm */ + struct drm_device dev; + struct drm_plane primary_plane; + struct drm_crtc crtc; + struct drm_encoder encoder; + struct yhgch_vdac vdac; +}; + +static inline struct yhgch_vdac *to_yhgch_vdac(struct drm_connector *connector) +{ + return container_of(connector, struct yhgch_vdac, base); +} + +static inline struct yhgch_drm_private *to_yhgch_drm_private(struct drm_device *dev) +{ + return container_of(dev, struct yhgch_drm_private, dev); +} + +void yhgch_set_power_mode(struct yhgch_drm_private *priv, + u32 power_mode); +void yhgch_set_current_gate(struct yhgch_drm_private *priv, + u32 gate); + +int yhgch_de_init(struct yhgch_drm_private *priv); +int yhgch_vdac_init(struct yhgch_drm_private *priv); +int yhgch_mm_init(struct yhgch_drm_private *yhgch); +int yhgch_ddc_create(struct drm_device *drm_dev, struct yhgch_vdac *connector); + +int yhgch_dumb_create(struct drm_file *file, struct drm_device *dev, + struct drm_mode_create_dumb *args); + +#endif diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_i2c.c b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_i2c.c new file mode 100644 index 000000000000..57f40efc60c1 --- /dev/null +++ b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_i2c.c @@ -0,0 +1,108 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include <linux/delay.h> +#include <linux/pci.h> + +#include <drm/drm_atomic_helper.h> +#include <drm/drm_probe_helper.h> + +#include <drm/drm_managed.h> + +#include "yhgch_drm_drv.h" + +#define GPIO_DATA 0x0802A0 +#define GPIO_DATA_DIRECTION 0x0802A4 + +#define I2C_SCL_MASK BIT(0) +#define I2C_SDA_MASK BIT(1) + +static void yhgch_set_i2c_signal(void *data, u32 mask, int value) +{ + struct yhgch_vdac *yhgch_vdac = data; + struct yhgch_drm_private *priv = to_yhgch_drm_private(yhgch_vdac->base.dev); + u32 tmp_dir = readl(priv->mmio + GPIO_DATA_DIRECTION); + + if (value) { + tmp_dir &= ~mask; + writel(tmp_dir, priv->mmio + GPIO_DATA_DIRECTION); + } else { + u32 tmp_data = readl(priv->mmio + GPIO_DATA); + + tmp_data &= ~mask; + writel(tmp_data, priv->mmio + GPIO_DATA); + + tmp_dir |= mask; + writel(tmp_dir, priv->mmio + GPIO_DATA_DIRECTION); + } +} + +static int yhgch_get_i2c_signal(void *data, u32 mask) +{ + struct yhgch_vdac *yhgch_vdac = data; + struct yhgch_drm_private *priv = to_yhgch_drm_private(yhgch_vdac->base.dev); + u32 tmp_dir = readl(priv->mmio + GPIO_DATA_DIRECTION); + + if ((tmp_dir & mask) != mask) { + tmp_dir &= ~mask; + writel(tmp_dir, priv->mmio + GPIO_DATA_DIRECTION); + } + + return (readl(priv->mmio + GPIO_DATA) & mask) ? 1 : 0; +} + +static void yhgch_ddc_setsda(void *data, int state) +{ + yhgch_set_i2c_signal(data, I2C_SDA_MASK, state); +} + +static void yhgch_ddc_setscl(void *data, int state) +{ + yhgch_set_i2c_signal(data, I2C_SCL_MASK, state); +} + +static int yhgch_ddc_getsda(void *data) +{ + return yhgch_get_i2c_signal(data, I2C_SDA_MASK); +} + +static int yhgch_ddc_getscl(void *data) +{ + return yhgch_get_i2c_signal(data, I2C_SCL_MASK); +} + +static void yhgch_ddc_release(struct drm_device *dev, void *res) +{ + struct yhgch_vdac *yhgch_vdac = res; + + i2c_del_adapter(&yhgch_vdac->adapter); +} + +int yhgch_ddc_create(struct drm_device *drm_dev, + struct yhgch_vdac *yhgch_vdac) +{ + int ret = 0; + + yhgch_vdac->adapter.owner = THIS_MODULE; + snprintf(yhgch_vdac->adapter.name, I2C_NAME_SIZE, "INS i2c bit bus"); + yhgch_vdac->adapter.dev.parent = drm_dev->dev; + i2c_set_adapdata(&yhgch_vdac->adapter, yhgch_vdac); + yhgch_vdac->adapter.algo_data = &yhgch_vdac->bit_data; + + yhgch_vdac->bit_data.udelay = 20; + yhgch_vdac->bit_data.timeout = usecs_to_jiffies(2000); + yhgch_vdac->bit_data.data = yhgch_vdac; + yhgch_vdac->bit_data.setsda = yhgch_ddc_setsda; + yhgch_vdac->bit_data.setscl = yhgch_ddc_setscl; + yhgch_vdac->bit_data.getsda = yhgch_ddc_getsda; + yhgch_vdac->bit_data.getscl = yhgch_ddc_getscl; + + ret = i2c_bit_add_bus(&yhgch_vdac->adapter); + if (ret) + return ret; + + ret = drmm_add_action_or_reset(drm_dev, yhgch_ddc_release, yhgch_vdac); + if (ret) + return ret; + + return ret; +} diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_regs.h b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_regs.h new file mode 100644 index 000000000000..d707f5186ab4 --- /dev/null +++ b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_regs.h @@ -0,0 +1,209 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef YHGCH_DRM_HW_H +#define YHGCH_DRM_HW_H + +/* register definition */ +#define YHGCH_MISC_CTRL 0x4 + +#define YHGCH_MSCCTL_LOCALMEM_RESET(x) ((x) << 6) +#define YHGCH_MSCCTL_LOCALMEM_RESET_MASK 0x40 + +#define YHGCH_CURRENT_GATE 0x000040 +#define YHGCH_CURR_GATE_DISPLAY(x) ((x) << 2) +#define YHGCH_CURR_GATE_DISPLAY_MASK 0x4 + +#define YHGCH_CURR_GATE_LOCALMEM(x) ((x) << 1) +#define YHGCH_CURR_GATE_LOCALMEM_MASK 0x2 + +#define YHGCH_MODE0_GATE 0x000044 +#define YHGCH_MODE1_GATE 0x000048 +#define YHGCH_POWER_MODE_CTRL 0x00004C + +#define YHGCH_PW_MODE_CTL_OSC_INPUT(x) ((x) << 3) +#define YHGCH_PW_MODE_CTL_OSC_INPUT_MASK 0x8 + +#define YHGCH_PW_MODE_CTL_MODE(x) ((x) << 0) +#define YHGCH_PW_MODE_CTL_MODE_MASK 0x03 +#define YHGCH_PW_MODE_CTL_MODE_SHIFT 0 + +#define YHGCH_PW_MODE_CTL_MODE_MODE0 0 +#define YHGCH_PW_MODE_CTL_MODE_MODE1 1 +#define YHGCH_PW_MODE_CTL_MODE_SLEEP 2 + +//#define YHGCH_CRT_PLL_CTRL 0x000060 + +#define YHGCH_PLL_CTRL_BYPASS(x) ((x) << 18) +#define YHGCH_PLL_CTRL_BYPASS_MASK 0x40000 + +#define YHGCH_PLL_CTRL_POWER(x) ((x) << 17) +#define YHGCH_PLL_CTRL_POWER_MASK 0x20000 + +#define YHGCH_PLL_CTRL_INPUT(x) ((x) << 16) +#define YHGCH_PLL_CTRL_INPUT_MASK 0x10000 + +#define YHGCH_PLL_CTRL_POD(x) ((x) << 14) +#define YHGCH_PLL_CTRL_POD_MASK 0xC000 + +#define YHGCH_PLL_CTRL_OD(x) ((x) << 12) +#define YHGCH_PLL_CTRL_OD_MASK 0x3000 + +#define YHGCH_PLL_CTRL_N(x) ((x) << 8) +#define YHGCH_PLL_CTRL_N_MASK 0xF00 + +#define YHGCH_PLL_CTRL_M(x) ((x) << 0) +#define YHGCH_PLL_CTRL_M_MASK 0xFF + +#define YHGCH_CRT_DISP_CTL 0x80200 + +#define YHGCH_CRT_DISP_CTL_DPMS(x) ((x) << 30) +#define YHGCH_CRT_DISP_CTL_DPMS_MASK 0xc0000000 + +#define YHGCH_CRT_DPMS_ON 0 +#define YHGCH_CRT_DPMS_OFF 3 + +#define YHGCH_CRT_DISP_CTL_CRTSELECT(x) ((x) << 25) +#define YHGCH_CRT_DISP_CTL_CRTSELECT_MASK 0x2000000 + +#define YHGCH_CRTSELECT_CRT 1 + +#define YHGCH_CRT_DISP_CTL_CLOCK_PHASE(x) ((x) << 14) +#define YHGCH_CRT_DISP_CTL_CLOCK_PHASE_MASK 0x4000 + +#define YHGCH_CRT_DISP_CTL_VSYNC_PHASE(x) ((x) << 13) +#define YHGCH_CRT_DISP_CTL_VSYNC_PHASE_MASK 0x2000 + +#define YHGCH_CRT_DISP_CTL_HSYNC_PHASE(x) ((x) << 12) +#define YHGCH_CRT_DISP_CTL_HSYNC_PHASE_MASK 0x1000 + +#define YHGCH_CRT_DISP_CTL_TIMING(x) ((x) << 8) +#define YHGCH_CRT_DISP_CTL_TIMING_MASK 0x100 + +#define YHGCH_CRT_DISP_CTL_PLANE(x) ((x) << 2) +#define YHGCH_CRT_DISP_CTL_PLANE_MASK 4 + +#define YHGCH_CRT_DISP_CTL_FORMAT(x) ((x) << 0) +#define YHGCH_CRT_DISP_CTL_FORMAT_MASK 0x03 + +#define YHGCH_CRT_FB_ADDRESS 0x080204 + +#define YHGCH_CRT_FB_WIDTH 0x080208 +#define YHGCH_CRT_FB_WIDTH_WIDTH(x) ((x) << 16) +#define YHGCH_CRT_FB_WIDTH_WIDTH_MASK 0x3FFF0000 +#define YHGCH_CRT_FB_WIDTH_OFFS(x) ((x) << 0) +#define YHGCH_CRT_FB_WIDTH_OFFS_MASK 0x3FFF + +#define YHGCH_CRT_HORZ_TOTAL 0x08020C +#define YHGCH_CRT_HORZ_TOTAL_TOTAL(x) ((x) << 16) +#define YHGCH_CRT_HORZ_TOTAL_TOTAL_MASK 0xFFF0000 + +#define YHGCH_CRT_HORZ_TOTAL_DISP_END(x) ((x) << 0) +#define YHGCH_CRT_HORZ_TOTAL_DISP_END_MASK 0xFFF + +#define YHGCH_CRT_HORZ_SYNC 0x080210 +#define YHGCH_CRT_HORZ_SYNC_WIDTH(x) ((x) << 16) +#define YHGCH_CRT_HORZ_SYNC_WIDTH_MASK 0xFF0000 + +#define YHGCH_CRT_HORZ_SYNC_START(x) ((x) << 0) +#define YHGCH_CRT_HORZ_SYNC_START_MASK 0xFFF + +#define YHGCH_CRT_VERT_TOTAL 0x080214 +#define YHGCH_CRT_VERT_TOTAL_TOTAL(x) ((x) << 16) +#define YHGCH_CRT_VERT_TOTAL_TOTAL_MASK 0x7FFF0000 + +#define YHGCH_CRT_VERT_TOTAL_DISP_END(x) ((x) << 0) +#define YHGCH_CRT_VERT_TOTAL_DISP_END_MASK 0x7FF + +#define YHGCH_CRT_VERT_SYNC 0x080218 +#define YHGCH_CRT_VERT_SYNC_HEIGHT(x) ((x) << 16) +#define YHGCH_CRT_VERT_SYNC_HEIGHT_MASK 0x3F0000 + +#define YHGCH_CRT_VERT_SYNC_START(x) ((x) << 0) +#define YHGCH_CRT_VERT_SYNC_START_MASK 0x7FF + +/* Hardware Cursor */ +#define YHGCH_HWC_ADDRESS 0x080230 +#define YHGCH_HWC_ADDRESS_ENABLE(x) ((x) << 31) +#define YHGCH_HWC_ADDRESS_ENABLE_MASK 0x80000000 +#define YHGCH_HWC_ADDRESS_ADDRESS(x) ((x) << 0) +#define YHGCH_HWC_ADDRESS_ADDRESS_MASK 0xFFFFFFF + +#define YHGCH_HWC_LOCATION 0x080234 +#define YHGCH_HWC_LOCATION_TOP(x) ((x) << 27) +#define YHGCH_HWC_LOCATION_TOP_MASK 0x8000000 +#define YHGCH_HWC_LOCATION_Y(x) ((x) << 16) +#define YHGCH_HWC_LOCATION_Y_MASK 0x7FF0000 +#define YHGCH_HWC_LOCATION_LEFT(x) ((x) << 11) +#define YHGCH_HWC_LOCATION_LEFT_MASK 0x800 +#define YHGCH_HWC_LOCATION_X(x) ((x) << 0) +#define YHGCH_HWC_LOCATION_X_MASK 0x7FF + +#define YHGCH_HWC_COLOR_12 0x080238 +#define YHGCH_HWC_COLOR_12_2_RGB(x) ((x) << 16) +#define YHGCH_HWC_COLOR_12_2_RGB_MASK 0xFFFF0000 +#define YHGCH_HWC_COLOR_12_1_RGB(x) ((x) << 0) +#define YHGCH_HWC_COLOR_12_1_RGB_MASK 0xFFFF + +#define YHGCH_HWC_COLOR_3 0x08023C +#define YHGCH_HWC_COLOR_3_RGB(x) ((x) << 0) +#define YHGCH_HWC_COLOR_3_RGB_MASK 0xFFFF + +/* Auto Centering */ +#define YHGCH_CRT_AUTO_CENTERING_TL 0x080280 +#define YHGCH_CRT_AUTO_CENTERING_TL_TOP(x) ((x) << 16) +#define YHGCH_CRT_AUTO_CENTERING_TL_TOP_MASK 0x7FF0000 + +#define YHGCH_CRT_AUTO_CENTERING_TL_LEFT(x) ((x) << 0) +#define YHGCH_CRT_AUTO_CENTERING_TL_LEFT_MASK 0x7FF + +#define YHGCH_CRT_AUTO_CENTERING_BR 0x080284 +#define YHGCH_CRT_AUTO_CENTERING_BR_BOTTOM(x) ((x) << 16) +#define YHGCH_CRT_AUTO_CENTERING_BR_BOTTOM_MASK 0x7FF0000 + +#define YHGCH_CRT_AUTO_CENTERING_BR_RIGHT(x) ((x) << 0) +#define YHGCH_CRT_AUTO_CENTERING_BR_RIGHT_MASK 0x7FF + +/* register to control panel output */ +#define YHGCH_DISPLAY_CONTROL_HISILE 0x80288 +#define YHGCH_DISPLAY_CONTROL_FPVDDEN(x) ((x) << 0) +#define YHGCH_DISPLAY_CONTROL_PANELDATE(x) ((x) << 1) +#define YHGCH_DISPLAY_CONTROL_FPEN(x) ((x) << 2) +#define YHGCH_DISPLAY_CONTROL_VBIASEN(x) ((x) << 3) + +#define YHGCH_RAW_INTERRUPT 0x80290 +#define YHGCH_RAW_INTERRUPT_VBLANK(x) ((x) << 2) +#define YHGCH_RAW_INTERRUPT_VBLANK_MASK 0x4 + +#define YHGCH_RAW_INTERRUPT_EN 0x80298 +#define YHGCH_RAW_INTERRUPT_EN_VBLANK(x) ((x) << 2) +#define YHGCH_RAW_INTERRUPT_EN_VBLANK_MASK 0x4 + +/* register and values for PLL control */ +#define CRT_PLL1_NS 0x802a8 +#define CRT_PLL1_NS_OUTER_BYPASS(x) ((x) << 30) +#define CRT_PLL1_NS_INTER_BYPASS(x) ((x) << 29) +#define CRT_PLL1_NS_POWERON(x) ((x) << 24) + +#define CRT_PLL1_NS_25MHZ 0x00006691 //640x480 +#define CRT_PLL1_NS_40MHZ 0x00004580 //800x600 +#define CRT_PLL1_NS_65MHZ 0x00002568 //1024x768 +#define CRT_PLL1_NS_83MHZ 0x000027bb //1280x800 +#define CRT_PLL1_NS_106MHZ 0x000027ef //1440x900 +#define CRT_PLL1_NS_108MHZ 0x000027f2 //1280x1024 +#define CRT_PLL1_NS_146MHZ 0x00001575 //1680x1050 +#define CRT_PLL1_NS_148MHZ 0x0000145f //1920x1080 +#define CRT_PLL1_NS_193MHZ 0x000018f7 //1920x1200 + +#define CRT_PLL2_NS 0x802ac +#define CRT_PLL2_NS_25MHZ 0x0 +#define CRT_PLL2_NS_40MHZ 0x0 +#define CRT_PLL2_NS_65MHZ 0x0 +#define CRT_PLL2_NS_83MHZ 0x0 +#define CRT_PLL2_NS_106MHZ 0x0 +#define CRT_PLL2_NS_108MHZ 0x0 +#define CRT_PLL2_NS_146MHZ 0x0 +#define CRT_PLL2_NS_148MHZ 0x0 +#define CRT_PLL2_NS_193MHZ 0x0 + +#define YHGCH_FIELD(field, value) (field(value) & field##_MASK) +#endif diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_vdac.c b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_vdac.c new file mode 100644 index 000000000000..6aaef773b7d1 --- /dev/null +++ b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_vdac.c @@ -0,0 +1,111 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <linux/io.h> + +#include <drm/drm_atomic_helper.h> +#include <drm/drm_edid.h> +#include <drm/drm_probe_helper.h> +#include <drm/drm_print.h> +#include <drm/drm_simple_kms_helper.h> + +#include "yhgch_drm_drv.h" +#include "yhgch_drm_regs.h" + +static int yhgch_connector_get_modes(struct drm_connector *connector) +{ + int count; + void *edid; + struct yhgch_vdac *yhgch_vdac = to_yhgch_vdac(connector); + + edid = drm_get_edid(connector, &yhgch_vdac->adapter); + if (edid) { + drm_connector_update_edid_property(connector, edid); + count = drm_add_edid_modes(connector, edid); + if (count) + goto out; + } + + count = drm_add_modes_noedid(connector, + connector->dev->mode_config.max_width, + connector->dev->mode_config.max_height); + drm_set_preferred_mode(connector, 1024, 768); + +out: + kfree(edid); + return count; +} + +static const struct drm_connector_helper_funcs + yhgch_connector_helper_funcs = { + .get_modes = yhgch_connector_get_modes, + .detect_ctx = drm_connector_helper_detect_from_ddc, +}; + +static const struct drm_connector_funcs yhgch_connector_funcs = { + .fill_modes = drm_helper_probe_single_connector_modes, + .destroy = drm_connector_cleanup, + .reset = drm_atomic_helper_connector_reset, + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, +}; + +static void yhgch_encoder_mode_set(struct drm_encoder *encoder, + struct drm_display_mode *mode, + struct drm_display_mode *adj_mode) +{ + u32 reg; + struct drm_device *dev = encoder->dev; + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); + + reg = readl(priv->mmio + YHGCH_DISPLAY_CONTROL_HISILE); + reg |= YHGCH_DISPLAY_CONTROL_FPVDDEN(1); + reg |= YHGCH_DISPLAY_CONTROL_PANELDATE(1); + reg |= YHGCH_DISPLAY_CONTROL_FPEN(1); + reg |= YHGCH_DISPLAY_CONTROL_VBIASEN(1); + writel(reg, priv->mmio + YHGCH_DISPLAY_CONTROL_HISILE); +} + +static const struct drm_encoder_helper_funcs yhgch_encoder_helper_funcs = { + .mode_set = yhgch_encoder_mode_set, +}; + +int yhgch_vdac_init(struct yhgch_drm_private *priv) +{ + struct drm_device *dev = &priv->dev; + struct yhgch_vdac *yhgch_vdac = &priv->vdac; + struct drm_encoder *encoder = &priv->encoder; + struct drm_crtc *crtc = &priv->crtc; + struct drm_connector *connector = &yhgch_vdac->base; + int ret; + + ret = yhgch_ddc_create(dev, yhgch_vdac); + if (ret) { + drm_err(dev, "failed to create ddc: %d\n", ret); + return ret; + } + + encoder->possible_crtcs = drm_crtc_mask(crtc); + ret = drmm_encoder_init(dev, encoder, NULL, DRM_MODE_ENCODER_DAC, NULL); + if (ret) { + drm_err(dev, "failed to init encoder: %d\n", ret); + return ret; + } + + drm_encoder_helper_add(encoder, &yhgch_encoder_helper_funcs); + + ret = drm_connector_init_with_ddc(dev, + connector, + &yhgch_connector_funcs, + DRM_MODE_CONNECTOR_VGA, + &yhgch_vdac->adapter); + if (ret) { + drm_err(dev, "failed to init connector: %d\n", ret); + return ret; + } + drm_connector_helper_add(connector, &yhgch_connector_helper_funcs); + connector->polled = DRM_CONNECTOR_POLL_CONNECT | DRM_CONNECTOR_POLL_DISCONNECT; + + drm_connector_attach_encoder(connector, encoder); + + return 0; +} -- 2.43.5 ^ permalink raw reply related [flat|nested] 22+ messages in thread
* Re: [PATCH v3 1/1] [DRIVER] gpu: drm: add support for Yhgc ZX1000 soc chipset 2025-09-10 2:23 ` [PATCH v3 1/1] [DRIVER] " Chu Guangqing @ 2025-09-11 0:44 ` Dmitry Baryshkov 2025-09-11 7:25 ` Thomas Zimmermann 1 sibling, 0 replies; 22+ messages in thread From: Dmitry Baryshkov @ 2025-09-11 0:44 UTC (permalink / raw) To: Chu Guangqing Cc: tzimmermann, maarten.lankhorst, mripard, airlied, simona, linux-kernel, dri-devel On Wed, Sep 10, 2025 at 10:23:10AM +0800, Chu Guangqing wrote: > add support for Yhgc BMC soc chipset > > Signed-off-by: Chu Guangqing <chuguangqing@inspur.com> > --- > MAINTAINERS | 5 + > drivers/gpu/drm/Kconfig | 2 + > drivers/gpu/drm/Makefile | 1 + > drivers/gpu/drm/yhgch/Kconfig | 3 + > drivers/gpu/drm/yhgch/Makefile | 1 + > drivers/gpu/drm/yhgch/yhgch-drm/Kconfig | 12 + > drivers/gpu/drm/yhgch/yhgch-drm/Makefile | 5 + > .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_de.c | 405 ++++++++++++++++++ > .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.c | 312 ++++++++++++++ > .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.h | 54 +++ > .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_i2c.c | 108 +++++ > .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_regs.h | 209 +++++++++ > .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_vdac.c | 111 +++++ > 13 files changed, 1228 insertions(+) > create mode 100644 drivers/gpu/drm/yhgch/Kconfig > create mode 100644 drivers/gpu/drm/yhgch/Makefile > create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/Kconfig > create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/Makefile > create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_de.c > create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.c > create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.h > create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_i2c.c > create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_regs.h > create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_vdac.c > > diff --git a/MAINTAINERS b/MAINTAINERS > index 10614ca41ed0..c79d9361fa81 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -27744,6 +27744,11 @@ S: Maintained > F: Documentation/input/devices/yealink.rst > F: drivers/input/misc/yealink.* > > +YHGC DRM DRIVER > +M: chuguangqing <chuguangqing@inspur.com> > +S: Maintained > +F: drivers/gpu/drm/yhgch > + > Z8530 DRIVER FOR AX.25 > M: Joerg Reuter <jreuter@yaina.de> > L: linux-hams@vger.kernel.org > diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig > index f7ea8e895c0c..8e0b1d12c81f 100644 > --- a/drivers/gpu/drm/Kconfig > +++ b/drivers/gpu/drm/Kconfig > @@ -396,6 +396,8 @@ source "drivers/gpu/drm/sprd/Kconfig" > > source "drivers/gpu/drm/imagination/Kconfig" > > +source "drivers/gpu/drm/yhgch/Kconfig" > + > config DRM_HYPERV > tristate "DRM Support for Hyper-V synthetic video device" > depends on DRM && PCI && HYPERV > diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile > index 4dafbdc8f86a..f344e0173b29 100644 > --- a/drivers/gpu/drm/Makefile > +++ b/drivers/gpu/drm/Makefile > @@ -231,6 +231,7 @@ obj-y += solomon/ > obj-$(CONFIG_DRM_SPRD) += sprd/ > obj-$(CONFIG_DRM_LOONGSON) += loongson/ > obj-$(CONFIG_DRM_POWERVR) += imagination/ > +obj-$(CONFIG_DRM_YHGCH) += yhgch/ > > # Ensure drm headers are self-contained and pass kernel-doc > hdrtest-files := \ > diff --git a/drivers/gpu/drm/yhgch/Kconfig b/drivers/gpu/drm/yhgch/Kconfig > new file mode 100644 > index 000000000000..4d2f473dbb4a > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/Kconfig > @@ -0,0 +1,3 @@ > +# License: GPL-2.0 > + > +source "drivers/gpu/drm/yhgch/yhgch-drm/Kconfig" > diff --git a/drivers/gpu/drm/yhgch/Makefile b/drivers/gpu/drm/yhgch/Makefile > new file mode 100644 > index 000000000000..c5229239002b > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/Makefile > @@ -0,0 +1 @@ > +obj-$(CONFIG_DRM_YHGCH) += yhgch-drm/ > diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/Kconfig b/drivers/gpu/drm/yhgch/yhgch-drm/Kconfig > new file mode 100644 > index 000000000000..10d586bbe897 > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/yhgch-drm/Kconfig > @@ -0,0 +1,12 @@ > +config DRM_YHGCH > + tristate "DRM Support for Yhgch BMC" > + depends on DRM && PCI && MMU > + select DRM_CLIENT_SELECTION > + select DRM_KMS_HELPER > + select DRM_VRAM_HELPER > + select DRM_TTM_HELPER > + help > + Choose this option if you have a Yhgch soc chipset. > + If M is selected the module will be called yhgch - drm. > + IF Y is selected the module will be built into the kernel. > + IF N is selected the module will be excluded from the kernel. > diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/Makefile b/drivers/gpu/drm/yhgch/yhgch-drm/Makefile > new file mode 100644 > index 000000000000..e9cc4dc6568d > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/yhgch-drm/Makefile > @@ -0,0 +1,5 @@ > +yhgch-drm-y := yhgch_drm_drv.o yhgch_drm_de.o yhgch_drm_vdac.o yhgch_drm_i2c.o > + > +obj-$(CONFIG_DRM_YHGCH) += yhgch-drm.o > + > + > diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_de.c b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_de.c > new file mode 100644 > index 000000000000..09b8d6fd1625 > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_de.c > @@ -0,0 +1,405 @@ > +// SPDX-License-Identifier: GPL-2.0-or-later > + > +#include <linux/delay.h> > +#include <drm/drm_atomic.h> > +#include <drm/drm_atomic_helper.h> > +#include <drm/drm_fourcc.h> > + > +#include <drm/drm_gem_vram_helper.h> > +#include <drm/drm_vblank.h> > + > +#include "yhgch_drm_drv.h" > +#include "yhgch_drm_regs.h" > + > +struct yhgch_dislay_pll_config { > + u64 hdisplay; > + u64 vdisplay; > + u32 pll1_config_value; > + u32 pll2_config_value; > +}; > + > +static const struct yhgch_dislay_pll_config yhgch_pll_table[] = { > + { 640, 480, CRT_PLL1_NS_25MHZ, CRT_PLL2_NS_25MHZ }, > + { 800, 600, CRT_PLL1_NS_40MHZ, CRT_PLL2_NS_40MHZ }, > + { 1024, 768, CRT_PLL1_NS_65MHZ, CRT_PLL2_NS_65MHZ }, > + { 1280, 1024, CRT_PLL1_NS_108MHZ, CRT_PLL2_NS_108MHZ }, > + { 1920, 1080, CRT_PLL1_NS_148MHZ, CRT_PLL2_NS_148MHZ }, > +}; > + > +static int yhgch_plane_atomic_check(struct drm_plane *plane, > + struct drm_atomic_state *state) > +{ > + struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state, > + plane); > + struct drm_framebuffer *fb = new_plane_state->fb; > + struct drm_crtc_state *new_crtc_state = NULL; > + int ret; > + > + if (!fb) > + return 0; > + > + if (new_plane_state->crtc) > + new_crtc_state = drm_atomic_get_new_crtc_state(state, new_plane_state->crtc); > + > + ret = drm_atomic_helper_check_plane_state(new_plane_state, new_crtc_state, > + DRM_PLANE_NO_SCALING, > + DRM_PLANE_NO_SCALING, > + false, true); > + if (ret) > + return ret; > + else if (!new_plane_state->visible) > + return 0; > + > + if (new_plane_state->crtc_x + new_plane_state->crtc_w > > + new_crtc_state->adjusted_mode.hdisplay || > + new_plane_state->crtc_y + new_plane_state->crtc_h > > + new_crtc_state->adjusted_mode.vdisplay) { > + drm_dbg_atomic(plane->dev, "visible portion of plane is invalid\n"); > + return -EINVAL; > + } Please use plane_state->dst instead of crtc_h/w/x/y. This rectangle contains clipped coordinates. > + > + if (new_plane_state->fb->pitches[0] % 16 != 0) { This belongs to framebuffer's atomic_check. > + drm_dbg_atomic(plane->dev, "wrong stride with 16-byte aligned\n"); > + return -EINVAL; > + } > + > + return 0; > +} > + > +static void yhgch_plane_atomic_update(struct drm_plane *plane, > + struct drm_atomic_state *state) > +{ > + struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state, > + plane); > + u32 reg; > + s64 gpu_addr = 0; > + u32 line_l; > + struct yhgch_drm_private *priv = to_yhgch_drm_private(plane->dev); > + struct drm_gem_vram_object *gbo; > + > + if (!new_state->fb) > + return; > + > + gbo = drm_gem_vram_of_gem(new_state->fb->obj[0]); > + > + gpu_addr = drm_gem_vram_offset(gbo); > + if (gpu_addr < 0) > + return; > + > + writel(gpu_addr, priv->mmio + YHGCH_CRT_FB_ADDRESS); > + > + reg = new_state->fb->width * (new_state->fb->format->cpp[0]); > + > + line_l = new_state->fb->pitches[0]; > + writel(YHGCH_FIELD(YHGCH_CRT_FB_WIDTH_WIDTH, reg) | > + YHGCH_FIELD(YHGCH_CRT_FB_WIDTH_OFFS, line_l), use FIELD_PREP() directly. > + priv->mmio + YHGCH_CRT_FB_WIDTH); > + > + /* SET PIXEL FORMAT */ > + reg = readl(priv->mmio + YHGCH_CRT_DISP_CTL); > + reg &= ~YHGCH_CRT_DISP_CTL_FORMAT_MASK; > + reg |= YHGCH_FIELD(YHGCH_CRT_DISP_CTL_FORMAT, > + new_state->fb->format->cpp[0] * 8 / 16); > + writel(reg, priv->mmio + YHGCH_CRT_DISP_CTL); > +} > + > +static const u32 channel_formats1[] = { > + DRM_FORMAT_RGB565, DRM_FORMAT_RGB888, > + DRM_FORMAT_XRGB8888, > +}; > + > +static struct drm_plane_funcs yhgch_plane_funcs = { > + .update_plane = drm_atomic_helper_update_plane, > + .disable_plane = drm_atomic_helper_disable_plane, > + .destroy = drm_plane_cleanup, > + .reset = drm_atomic_helper_plane_reset, > + .atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state, > + .atomic_destroy_state = drm_atomic_helper_plane_destroy_state, > +}; > + > +static const struct drm_plane_helper_funcs yhgch_plane_helper_funcs = { > + DRM_GEM_VRAM_PLANE_HELPER_FUNCS, > + .atomic_check = yhgch_plane_atomic_check, > + .atomic_update = yhgch_plane_atomic_update, > +}; > + > +static void yhgch_crtc_dpms(struct drm_crtc *crtc, u32 dpms) > +{ > + struct yhgch_drm_private *priv = to_yhgch_drm_private(crtc->dev); > + u32 reg; > + > + reg = readl(priv->mmio + YHGCH_CRT_DISP_CTL); > + reg &= ~YHGCH_CRT_DISP_CTL_DPMS_MASK; > + reg |= YHGCH_FIELD(YHGCH_CRT_DISP_CTL_DPMS, dpms); > + reg &= ~YHGCH_CRT_DISP_CTL_TIMING_MASK; > + if (dpms == YHGCH_CRT_DPMS_ON) > + reg |= YHGCH_CRT_DISP_CTL_TIMING(1); > + writel(reg, priv->mmio + YHGCH_CRT_DISP_CTL); > +} > + > +static void yhgch_crtc_atomic_enable(struct drm_crtc *crtc, > + struct drm_atomic_state *old_state) > +{ > + u32 reg; > + struct yhgch_drm_private *priv = to_yhgch_drm_private(crtc->dev); > + > + yhgch_set_power_mode(priv, YHGCH_PW_MODE_CTL_MODE_MODE0); > + > + /* Enable display power gate & LOCALMEM power gate */ > + reg = readl(priv->mmio + YHGCH_CURRENT_GATE); > + reg &= ~YHGCH_CURR_GATE_LOCALMEM_MASK; > + reg &= ~YHGCH_CURR_GATE_DISPLAY_MASK; > + reg |= YHGCH_CURR_GATE_LOCALMEM(1); > + reg |= YHGCH_CURR_GATE_DISPLAY(1); > + yhgch_set_current_gate(priv, reg); > + yhgch_crtc_dpms(crtc, YHGCH_CRT_DPMS_ON); > +} > + > +static void yhgch_crtc_atomic_disable(struct drm_crtc *crtc, > + struct drm_atomic_state *old_state) > +{ > + u32 reg; > + struct yhgch_drm_private *priv = to_yhgch_drm_private(crtc->dev); > + > + yhgch_crtc_dpms(crtc, YHGCH_CRT_DPMS_OFF); > + > + yhgch_set_power_mode(priv, YHGCH_PW_MODE_CTL_MODE_SLEEP); > + > + /* Enable display power gate & LOCALMEM power gate */ > + reg = readl(priv->mmio + YHGCH_CURRENT_GATE); > + reg &= ~YHGCH_CURR_GATE_LOCALMEM_MASK; > + reg &= ~YHGCH_CURR_GATE_DISPLAY_MASK; > + reg |= YHGCH_CURR_GATE_LOCALMEM(0); > + reg |= YHGCH_CURR_GATE_DISPLAY(0); > + yhgch_set_current_gate(priv, reg); > +} > + > +static enum drm_mode_status > +yhgch_crtc_mode_valid(struct drm_crtc *crtc, > + const struct drm_display_mode *mode) > +{ > + size_t i = 0; > + int vrefresh = drm_mode_vrefresh(mode); > + > + if (vrefresh < 59 || vrefresh > 61) > + return MODE_NOCLOCK; > + > + for (i = 0; i < ARRAY_SIZE(yhgch_pll_table); i++) { > + if (yhgch_pll_table[i].hdisplay == mode->hdisplay && > + yhgch_pll_table[i].vdisplay == mode->vdisplay) > + return MODE_OK; > + } > + > + return MODE_BAD; > +} > + > +static void set_vclock_yhgch(struct drm_device *dev, u64 pll) > +{ > + u32 val; > + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); > + > + val = readl(priv->mmio + CRT_PLL1_NS); > + val &= ~(CRT_PLL1_NS_OUTER_BYPASS(1)); > + writel(val, priv->mmio + CRT_PLL1_NS); > + > + val = CRT_PLL1_NS_INTER_BYPASS(1) | CRT_PLL1_NS_POWERON(1); > + writel(val, priv->mmio + CRT_PLL1_NS); > + > + writel(pll, priv->mmio + CRT_PLL1_NS); > + > + usleep_range(1000, 2000); > + > + val = pll & ~(CRT_PLL1_NS_POWERON(1)); > + writel(val, priv->mmio + CRT_PLL1_NS); > + > + usleep_range(1000, 2000); > + > + val &= ~(CRT_PLL1_NS_INTER_BYPASS(1)); > + writel(val, priv->mmio + CRT_PLL1_NS); > + > + usleep_range(1000, 2000); > + > + val |= CRT_PLL1_NS_OUTER_BYPASS(1); > + writel(val, priv->mmio + CRT_PLL1_NS); > +} > + > +static void get_pll_config(u64 x, u64 y, u32 *pll1, u32 *pll2) > +{ > + size_t i; > + size_t count = ARRAY_SIZE(yhgch_pll_table); > + > + for (i = 0; i < count; i++) { > + if (yhgch_pll_table[i].hdisplay == x && > + yhgch_pll_table[i].vdisplay == y) { > + *pll1 = yhgch_pll_table[i].pll1_config_value; > + *pll2 = yhgch_pll_table[i].pll2_config_value; > + return; > + } > + } > + > + /* if found none, we use default value */ > + *pll1 = CRT_PLL1_NS_25MHZ; > + *pll2 = CRT_PLL2_NS_25MHZ; > +} > + > +/* > + * This function takes care the extra registers and bit fields required to > + * setup a mode in board. > + * Explanation about Display Control register: > + * FPGA only supports 7 predefined pixel clocks, and clock select is > + * in bit 4:0 of new register 0x802a8. > + */ > +static u32 display_ctrl_adjust(struct drm_device *dev, > + struct drm_display_mode *mode, > + u32 ctrl) > +{ > + u64 w, h; > + u32 pll1; /* bit[31:0] of PLL */ > + u32 pll2; /* bit[63:32] of PLL */ > + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); > + > + w = mode->hdisplay; > + h = mode->vdisplay; > + > + get_pll_config(w, h, &pll1, &pll2); > + writel(pll2, priv->mmio + CRT_PLL2_NS); > + set_vclock_yhgch(dev, pll1); > + > + /* > + * yhgch has to set up the top-left and bottom-right > + * registers as well. > + * Note that normal chip only use those two register for > + * auto-centering mode. > + */ > + writel(YHGCH_FIELD(YHGCH_CRT_AUTO_CENTERING_TL_TOP, 0) | > + YHGCH_FIELD(YHGCH_CRT_AUTO_CENTERING_TL_LEFT, 0), > + priv->mmio + YHGCH_CRT_AUTO_CENTERING_TL); > + > + writel(YHGCH_FIELD(YHGCH_CRT_AUTO_CENTERING_BR_BOTTOM, h - 1) | > + YHGCH_FIELD(YHGCH_CRT_AUTO_CENTERING_BR_RIGHT, w - 1), > + priv->mmio + YHGCH_CRT_AUTO_CENTERING_BR); > + > + /* > + * Assume common fields in ctrl have been properly set before > + * calling this function. > + * This function only sets the extra fields in ctrl. > + */ > + > + /* Set bit 25 of display controller: Select CRT or VGA clock */ > + ctrl &= ~YHGCH_CRT_DISP_CTL_CRTSELECT_MASK; > + ctrl &= ~YHGCH_CRT_DISP_CTL_CLOCK_PHASE_MASK; > + > + ctrl |= YHGCH_CRT_DISP_CTL_CRTSELECT(YHGCH_CRTSELECT_CRT); > + > + /* clock_phase_polarity is 0 */ > + ctrl |= YHGCH_CRT_DISP_CTL_CLOCK_PHASE(0); > + ctrl |= YHGCH_FIELD(YHGCH_CRT_DISP_CTL_FORMAT, 2); > + > + writel(ctrl, priv->mmio + YHGCH_CRT_DISP_CTL); > + > + return ctrl; > +} > + > +static void yhgch_crtc_mode_set_nofb(struct drm_crtc *crtc) > +{ > + u32 val; > + struct drm_display_mode *mode = &crtc->state->mode; > + struct drm_device *dev = crtc->dev; > + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); > + u32 width = mode->hsync_end - mode->hsync_start; > + u32 height = mode->vsync_end - mode->vsync_start; > + > + //writel(format_pll_reg(), priv->mmio + YHGCH_CRT_PLL_CTRL); > + writel(YHGCH_FIELD(YHGCH_CRT_HORZ_TOTAL_TOTAL, mode->htotal - 1) | > + YHGCH_FIELD(YHGCH_CRT_HORZ_TOTAL_DISP_END, mode->hdisplay - 1), > + priv->mmio + YHGCH_CRT_HORZ_TOTAL); > + > + writel(YHGCH_FIELD(YHGCH_CRT_HORZ_SYNC_WIDTH, width) | > + YHGCH_FIELD(YHGCH_CRT_HORZ_SYNC_START, mode->hsync_start - 1), > + priv->mmio + YHGCH_CRT_HORZ_SYNC); > + > + writel(YHGCH_FIELD(YHGCH_CRT_VERT_TOTAL_TOTAL, mode->vtotal - 1) | > + YHGCH_FIELD(YHGCH_CRT_VERT_TOTAL_DISP_END, mode->vdisplay - 1), > + priv->mmio + YHGCH_CRT_VERT_TOTAL); > + > + writel(YHGCH_FIELD(YHGCH_CRT_VERT_SYNC_HEIGHT, height) | > + YHGCH_FIELD(YHGCH_CRT_VERT_SYNC_START, mode->vsync_start - 1), > + priv->mmio + YHGCH_CRT_VERT_SYNC); > + > + val = YHGCH_FIELD(YHGCH_CRT_DISP_CTL_VSYNC_PHASE, 0); > + val |= YHGCH_FIELD(YHGCH_CRT_DISP_CTL_HSYNC_PHASE, 0); > + val |= YHGCH_CRT_DISP_CTL_TIMING(1); > + val |= YHGCH_CRT_DISP_CTL_PLANE(1); > + > + display_ctrl_adjust(dev, mode, val); > +} > + > +static void yhgch_crtc_atomic_begin(struct drm_crtc *crtc, > + struct drm_atomic_state *old_state) > +{ > + u32 reg; > + struct drm_device *dev = crtc->dev; > + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); > + > + yhgch_set_power_mode(priv, YHGCH_PW_MODE_CTL_MODE_MODE0); > + > + /* Enable display power gate & LOCALMEM power gate */ > + reg = readl(priv->mmio + YHGCH_CURRENT_GATE); > + reg &= ~YHGCH_CURR_GATE_DISPLAY_MASK; > + reg &= ~YHGCH_CURR_GATE_LOCALMEM_MASK; > + reg |= YHGCH_CURR_GATE_DISPLAY(1); > + reg |= YHGCH_CURR_GATE_LOCALMEM(1); > + yhgch_set_current_gate(priv, reg); > + > + /* We can add more initialization as needed. */ > +} > + > +static const struct drm_crtc_funcs yhgch_crtc_funcs = { > + .page_flip = drm_atomic_helper_page_flip, > + .set_config = drm_atomic_helper_set_config, > + .destroy = drm_crtc_cleanup, > + .reset = drm_atomic_helper_crtc_reset, > + .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state, > + .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state, > + > +}; > + > +static const struct drm_crtc_helper_funcs yhgch_crtc_helper_funcs = { > + .mode_set_nofb = yhgch_crtc_mode_set_nofb, > + .atomic_begin = yhgch_crtc_atomic_begin, > + .atomic_enable = yhgch_crtc_atomic_enable, > + .atomic_disable = yhgch_crtc_atomic_disable, > + .mode_valid = yhgch_crtc_mode_valid, > +}; > + > +int yhgch_de_init(struct yhgch_drm_private *priv) > +{ > + struct drm_device *dev = &priv->dev; > + struct drm_crtc *crtc = &priv->crtc; > + struct drm_plane *plane = &priv->primary_plane; > + int ret; > + > + ret = drm_universal_plane_init(dev, plane, 1, &yhgch_plane_funcs, > + channel_formats1, > + ARRAY_SIZE(channel_formats1), > + NULL, > + DRM_PLANE_TYPE_PRIMARY, > + NULL); > + if (ret) { > + drm_err(dev, "failed to init plane: %d\n", ret); > + return ret; > + } > + > + drm_plane_helper_add(plane, &yhgch_plane_helper_funcs); > + > + ret = drm_crtc_init_with_planes(dev, crtc, plane, > + NULL, &yhgch_crtc_funcs, NULL); > + if (ret) { > + drm_err(dev, "failed to init crtc: %d\n", ret); > + return ret; > + } > + > + drm_crtc_helper_add(crtc, &yhgch_crtc_helper_funcs); > + > + return 0; > +} > diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.c b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.c > new file mode 100644 > index 000000000000..276a0e129058 > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.c > @@ -0,0 +1,312 @@ > +// SPDX-License-Identifier: GPL-2.0 > + > +#include "yhgch_drm_drv.h" > + > +#include <linux/module.h> > +#include <linux/pci.h> > + > +#include <linux/aperture.h> > +#include <drm/clients/drm_client_setup.h> > + > +#include <drm/drm_atomic_helper.h> > +#include <drm/drm_drv.h> > +#include <drm/drm_fbdev_ttm.h> > + > +#include <drm/drm_gem_framebuffer_helper.h> > +#include <drm/drm_gem_vram_helper.h> > +#include <drm/drm_managed.h> > +#include <drm/drm_module.h> > +#include <drm/drm_vblank.h> > + > +#include <drm/drm_probe_helper.h> > + > +#include "yhgch_drm_drv.h" > +#include "yhgch_drm_regs.h" > + > +#define MEM_SIZE_RESERVE4KVM 0x200000 > + > +DEFINE_DRM_GEM_FOPS(yhgch_fops); > + > +int yhgch_dumb_create(struct drm_file *file, struct drm_device *dev, > + struct drm_mode_create_dumb *args) > +{ > + return drm_gem_vram_fill_create_dumb(file, dev, 0, 16, args); > +} > + > +static struct drm_driver yhgch_driver = { > + .driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC, > + .fops = &yhgch_fops, > + .name = "yhgch", > + .desc = "yhgch drm driver", > + .major = 3, > + .minor = 1, > + .debugfs_init = drm_vram_mm_debugfs_init, > + .dumb_create = yhgch_dumb_create, > + .dumb_map_offset = drm_gem_ttm_dumb_map_offset, > + DRM_FBDEV_TTM_DRIVER_OPS, > +}; > + > +static int __maybe_unused yhgch_pm_suspend(struct device *dev) > +{ > + struct drm_device *drm_dev = dev_get_drvdata(dev); > + > + return drm_mode_config_helper_suspend(drm_dev); > +} > + > +static int __maybe_unused yhgch_pm_resume(struct device *dev) > +{ > + struct drm_device *drm_dev = dev_get_drvdata(dev); > + > + return drm_mode_config_helper_resume(drm_dev); > +} > + > +static const struct dev_pm_ops yhgch_pm_ops = { > + SET_SYSTEM_SLEEP_PM_OPS(yhgch_pm_suspend, > + yhgch_pm_resume) > +}; > + > +static const struct drm_mode_config_funcs yhgch_mode_funcs = { > + .mode_valid = drm_vram_helper_mode_valid, > + .atomic_check = drm_atomic_helper_check, > + .atomic_commit = drm_atomic_helper_commit, > + .fb_create = drm_gem_fb_create, > +}; > + > +static int yhgch_kms_init(struct yhgch_drm_private *priv) > +{ > + struct drm_device *dev = &priv->dev; > + int ret; > + > + ret = drmm_mode_config_init(dev); > + if (ret) > + return ret; > + > + priv->dev.mode_config.min_width = 0; > + priv->dev.mode_config.min_height = 0; > + priv->dev.mode_config.max_width = 1920; > + priv->dev.mode_config.max_height = 1200; > + dev->mode_config.preferred_depth = 24; Why is this line different from all other lines? > + priv->dev.mode_config.prefer_shadow = 1; > + priv->dev.mode_config.funcs = &yhgch_mode_funcs; > + > + ret = yhgch_de_init(priv); > + if (ret) { > + drm_err(dev, "failed to init de: %d\n", ret); > + return ret; > + } > + > + ret = yhgch_vdac_init(priv); > + if (ret) { > + drm_err(dev, "failed to init vdac: %d\n", ret); > + return ret; > + } > + drm_kms_helper_poll_init(dev); > + > + return 0; > +} > + > +/* > + * It can operate in one of three modes: 0, 1 or Sleep. > + */ > +void yhgch_set_power_mode(struct yhgch_drm_private *priv, u32 power_mode) > +{ > + unsigned int control_value = 0; > + void __iomem *mmio = priv->mmio; > + u32 input = 1; > + > + if (power_mode > YHGCH_PW_MODE_CTL_MODE_SLEEP) > + return; > + > + if (power_mode == YHGCH_PW_MODE_CTL_MODE_SLEEP) > + input = 0; > + > + control_value = readl(mmio + YHGCH_POWER_MODE_CTRL); > + control_value &= ~(YHGCH_PW_MODE_CTL_MODE_MASK | > + YHGCH_PW_MODE_CTL_OSC_INPUT_MASK); > + control_value |= YHGCH_FIELD(YHGCH_PW_MODE_CTL_MODE, power_mode); > + control_value |= YHGCH_FIELD(YHGCH_PW_MODE_CTL_OSC_INPUT, input); > + writel(control_value, mmio + YHGCH_POWER_MODE_CTRL); > +} > + > +void yhgch_set_current_gate(struct yhgch_drm_private *priv, unsigned int gate) > +{ > + u32 gate_reg; > + u32 mode; > + void __iomem *mmio = priv->mmio; > + > + /* Get current power mode. */ > + mode = (readl(mmio + YHGCH_POWER_MODE_CTRL) & > + YHGCH_PW_MODE_CTL_MODE_MASK) >> YHGCH_PW_MODE_CTL_MODE_SHIFT; > + > + switch (mode) { > + case YHGCH_PW_MODE_CTL_MODE_MODE0: > + gate_reg = YHGCH_MODE0_GATE; > + break; > + > + case YHGCH_PW_MODE_CTL_MODE_MODE1: > + gate_reg = YHGCH_MODE1_GATE; > + break; > + > + default: > + gate_reg = YHGCH_MODE0_GATE; > + break; > + } > + writel(gate, mmio + gate_reg); > +} > + > +static void yhgch_hw_config(struct yhgch_drm_private *priv) > +{ > + u32 reg; > + > + /* On hardware reset, power mode 0 is default. */ > + yhgch_set_power_mode(priv, YHGCH_PW_MODE_CTL_MODE_MODE0); > + > + /* Enable display power gate & LOCALMEM power gate */ > + reg = readl(priv->mmio + YHGCH_CURRENT_GATE); > + reg &= ~YHGCH_CURR_GATE_DISPLAY_MASK; > + reg &= ~YHGCH_CURR_GATE_LOCALMEM_MASK; > + reg |= YHGCH_CURR_GATE_DISPLAY(1); > + reg |= YHGCH_CURR_GATE_LOCALMEM(1); > + > + yhgch_set_current_gate(priv, reg); > + > + /* > + * Reset the memory controller. If the memory controller > + * is not reset in chip,the system might hang when sw accesses > + * the memory.The memory should be resetted after > + * changing the MXCLK. > + */ > + reg = readl(priv->mmio + YHGCH_MISC_CTRL); > + reg &= ~YHGCH_MSCCTL_LOCALMEM_RESET_MASK; > + reg |= YHGCH_MSCCTL_LOCALMEM_RESET(0); > + writel(reg, priv->mmio + YHGCH_MISC_CTRL); > + > + reg &= ~YHGCH_MSCCTL_LOCALMEM_RESET_MASK; > + reg |= YHGCH_MSCCTL_LOCALMEM_RESET(1); > + > + writel(reg, priv->mmio + YHGCH_MISC_CTRL); > +} > + > +static int yhgch_hw_map(struct yhgch_drm_private *priv) > +{ > + struct drm_device *dev = &priv->dev; > + struct pci_dev *pdev = to_pci_dev(dev->dev); > + resource_size_t ioaddr, iosize; > + > + ioaddr = pci_resource_start(pdev, 1); > + iosize = pci_resource_len(pdev, 1); > + priv->mmio = devm_ioremap(dev->dev, ioaddr, iosize); > + if (!priv->mmio) { > + drm_err(dev, "Cannot map mmio region\n"); > + return -ENOMEM; > + } > + return 0; > +} > + > +static int yhgch_hw_init(struct yhgch_drm_private *priv) > +{ > + int ret; > + > + ret = yhgch_hw_map(priv); > + if (ret) > + return ret; > + yhgch_hw_config(priv); > + return 0; > +} > + > +static int yhgch_pci_probe(struct pci_dev *pdev, > + const struct pci_device_id *ent) > +{ > + struct yhgch_drm_private *priv; > + struct drm_device *dev; > + int ret; > + > + ret = aperture_remove_conflicting_pci_devices(pdev, yhgch_driver.name); > + > + if (ret) > + return ret; > + > + priv = devm_drm_dev_alloc(&pdev->dev, &yhgch_driver, > + struct yhgch_drm_private, dev); > + > + if (IS_ERR(priv)) > + return PTR_ERR(priv); > + > + dev = &priv->dev; > + pci_set_drvdata(pdev, dev); > + > + ret = pcim_enable_device(pdev); > + if (ret) { > + drm_err(dev, "failed to enable pci device: %d\n", ret); > + goto err_return; > + } > + > + ret = yhgch_hw_init(priv); > + if (ret) > + goto err_unload; > + ret = drmm_vram_helper_init(dev, pci_resource_start(pdev, 0), > + pci_resource_len(pdev, 0)); > + if (ret) { > + drm_err(dev, "Error initializing VRAM MM; %d\n", ret); > + goto err_unload; > + } > + ret = yhgch_kms_init(priv); > + if (ret) > + goto err_unload; > + > + ret = pci_enable_msi(pdev); > + if (ret) > + drm_warn(dev, "enabling MSI failed: %d\n", ret); > + /* reset all the states of crtc/plane/encoder/connector */ > + drm_mode_config_reset(dev); > + > + ret = drm_dev_register(dev, 0); > + if (ret) { > + drm_err(dev, "failed to register drv for userspace access: %d\n", > + ret); > + goto err_unload; > + } > + drm_client_setup(dev, NULL); > + > + return 0; > + > +err_unload: > + drm_atomic_helper_shutdown(dev); I don't think this is necessary, it will be unrolled by drmm code. > +err_return: > + return ret; > +} > + > +static void yhgch_pci_remove(struct pci_dev *pdev) > +{ > + struct drm_device *dev = pci_get_drvdata(pdev); > + > + drm_dev_unregister(dev); > + drm_atomic_helper_shutdown(dev); No need to shutdown it here. > +} > + > +static void yhgch_pci_shutdown(struct pci_dev *pdev) > +{ > + drm_atomic_helper_shutdown(pci_get_drvdata(pdev)); > +} > + > +static struct pci_device_id yhgch_pci_table[] = { > + { 0x1bd4, 0x0750, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, > + { 0, } > +}; > + > +static struct pci_driver yhgch_pci_driver = { > + .name = "yhgch-drm", > + .id_table = yhgch_pci_table, > + .probe = yhgch_pci_probe, > + .remove = yhgch_pci_remove, > + .shutdown = yhgch_pci_shutdown, > + .driver.pm = &yhgch_pm_ops, > +}; > + > +drm_module_pci_driver(yhgch_pci_driver); > + > +MODULE_DEVICE_TABLE(pci, yhgch_pci_table); > +MODULE_AUTHOR(""); ?? > +MODULE_DESCRIPTION("DRM Driver for YhgchBMC"); > +MODULE_LICENSE("GPL"); > +MODULE_VERSION("3.1"); > diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.h b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.h > new file mode 100644 > index 000000000000..8892d4ca0bae > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.h > @@ -0,0 +1,54 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > + > +#ifndef YHGCH_DRM_DRV_H > +#define YHGCH_DRM_DRV_H > + > +#include <linux/gpio/consumer.h> > +#include <linux/i2c-algo-bit.h> > +#include <linux/i2c.h> > +#include <linux/version.h> > +#include <drm/drm_framebuffer.h> > +#include <drm/drm_encoder.h> > + > +struct yhgch_vdac { > + struct drm_connector base; > + struct i2c_adapter adapter; > + struct i2c_algo_bit_data bit_data; > +}; > + > +struct yhgch_drm_private { > + /* hw */ > + void __iomem *mmio; > + > + /* drm */ > + struct drm_device dev; > + struct drm_plane primary_plane; > + struct drm_crtc crtc; > + struct drm_encoder encoder; > + struct yhgch_vdac vdac; > +}; > + > +static inline struct yhgch_vdac *to_yhgch_vdac(struct drm_connector *connector) > +{ > + return container_of(connector, struct yhgch_vdac, base); > +} > + > +static inline struct yhgch_drm_private *to_yhgch_drm_private(struct drm_device *dev) > +{ > + return container_of(dev, struct yhgch_drm_private, dev); > +} > + > +void yhgch_set_power_mode(struct yhgch_drm_private *priv, > + u32 power_mode); > +void yhgch_set_current_gate(struct yhgch_drm_private *priv, > + u32 gate); > + > +int yhgch_de_init(struct yhgch_drm_private *priv); > +int yhgch_vdac_init(struct yhgch_drm_private *priv); > +int yhgch_mm_init(struct yhgch_drm_private *yhgch); > +int yhgch_ddc_create(struct drm_device *drm_dev, struct yhgch_vdac *connector); > + > +int yhgch_dumb_create(struct drm_file *file, struct drm_device *dev, > + struct drm_mode_create_dumb *args); > + > +#endif > diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_i2c.c b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_i2c.c > new file mode 100644 > index 000000000000..57f40efc60c1 > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_i2c.c > @@ -0,0 +1,108 @@ > +// SPDX-License-Identifier: GPL-2.0-or-later > + > +#include <linux/delay.h> > +#include <linux/pci.h> > + > +#include <drm/drm_atomic_helper.h> > +#include <drm/drm_probe_helper.h> > + > +#include <drm/drm_managed.h> > + > +#include "yhgch_drm_drv.h" > + > +#define GPIO_DATA 0x0802A0 > +#define GPIO_DATA_DIRECTION 0x0802A4 > + > +#define I2C_SCL_MASK BIT(0) > +#define I2C_SDA_MASK BIT(1) > + > +static void yhgch_set_i2c_signal(void *data, u32 mask, int value) > +{ > + struct yhgch_vdac *yhgch_vdac = data; > + struct yhgch_drm_private *priv = to_yhgch_drm_private(yhgch_vdac->base.dev); > + u32 tmp_dir = readl(priv->mmio + GPIO_DATA_DIRECTION); > + > + if (value) { > + tmp_dir &= ~mask; > + writel(tmp_dir, priv->mmio + GPIO_DATA_DIRECTION); > + } else { > + u32 tmp_data = readl(priv->mmio + GPIO_DATA); > + > + tmp_data &= ~mask; > + writel(tmp_data, priv->mmio + GPIO_DATA); > + > + tmp_dir |= mask; > + writel(tmp_dir, priv->mmio + GPIO_DATA_DIRECTION); > + } > +} > + > +static int yhgch_get_i2c_signal(void *data, u32 mask) > +{ > + struct yhgch_vdac *yhgch_vdac = data; > + struct yhgch_drm_private *priv = to_yhgch_drm_private(yhgch_vdac->base.dev); > + u32 tmp_dir = readl(priv->mmio + GPIO_DATA_DIRECTION); > + > + if ((tmp_dir & mask) != mask) { > + tmp_dir &= ~mask; > + writel(tmp_dir, priv->mmio + GPIO_DATA_DIRECTION); > + } > + > + return (readl(priv->mmio + GPIO_DATA) & mask) ? 1 : 0; > +} > + > +static void yhgch_ddc_setsda(void *data, int state) > +{ > + yhgch_set_i2c_signal(data, I2C_SDA_MASK, state); > +} > + > +static void yhgch_ddc_setscl(void *data, int state) > +{ > + yhgch_set_i2c_signal(data, I2C_SCL_MASK, state); > +} > + > +static int yhgch_ddc_getsda(void *data) > +{ > + return yhgch_get_i2c_signal(data, I2C_SDA_MASK); > +} > + > +static int yhgch_ddc_getscl(void *data) > +{ > + return yhgch_get_i2c_signal(data, I2C_SCL_MASK); > +} > + > +static void yhgch_ddc_release(struct drm_device *dev, void *res) > +{ > + struct yhgch_vdac *yhgch_vdac = res; > + > + i2c_del_adapter(&yhgch_vdac->adapter); > +} > + > +int yhgch_ddc_create(struct drm_device *drm_dev, > + struct yhgch_vdac *yhgch_vdac) > +{ > + int ret = 0; > + > + yhgch_vdac->adapter.owner = THIS_MODULE; > + snprintf(yhgch_vdac->adapter.name, I2C_NAME_SIZE, "INS i2c bit bus"); > + yhgch_vdac->adapter.dev.parent = drm_dev->dev; > + i2c_set_adapdata(&yhgch_vdac->adapter, yhgch_vdac); > + yhgch_vdac->adapter.algo_data = &yhgch_vdac->bit_data; > + > + yhgch_vdac->bit_data.udelay = 20; > + yhgch_vdac->bit_data.timeout = usecs_to_jiffies(2000); > + yhgch_vdac->bit_data.data = yhgch_vdac; > + yhgch_vdac->bit_data.setsda = yhgch_ddc_setsda; > + yhgch_vdac->bit_data.setscl = yhgch_ddc_setscl; > + yhgch_vdac->bit_data.getsda = yhgch_ddc_getsda; > + yhgch_vdac->bit_data.getscl = yhgch_ddc_getscl; > + > + ret = i2c_bit_add_bus(&yhgch_vdac->adapter); > + if (ret) > + return ret; > + > + ret = drmm_add_action_or_reset(drm_dev, yhgch_ddc_release, yhgch_vdac); > + if (ret) > + return ret; > + > + return ret; > +} > diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_regs.h b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_regs.h > new file mode 100644 > index 000000000000..d707f5186ab4 > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_regs.h > @@ -0,0 +1,209 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > + > +#ifndef YHGCH_DRM_HW_H > +#define YHGCH_DRM_HW_H > + > +/* register definition */ > +#define YHGCH_MISC_CTRL 0x4 > + > +#define YHGCH_MSCCTL_LOCALMEM_RESET(x) ((x) << 6) > +#define YHGCH_MSCCTL_LOCALMEM_RESET_MASK 0x40 > + > +#define YHGCH_CURRENT_GATE 0x000040 > +#define YHGCH_CURR_GATE_DISPLAY(x) ((x) << 2) > +#define YHGCH_CURR_GATE_DISPLAY_MASK 0x4 > + > +#define YHGCH_CURR_GATE_LOCALMEM(x) ((x) << 1) > +#define YHGCH_CURR_GATE_LOCALMEM_MASK 0x2 > + > +#define YHGCH_MODE0_GATE 0x000044 > +#define YHGCH_MODE1_GATE 0x000048 > +#define YHGCH_POWER_MODE_CTRL 0x00004C > + > +#define YHGCH_PW_MODE_CTL_OSC_INPUT(x) ((x) << 3) > +#define YHGCH_PW_MODE_CTL_OSC_INPUT_MASK 0x8 > + > +#define YHGCH_PW_MODE_CTL_MODE(x) ((x) << 0) > +#define YHGCH_PW_MODE_CTL_MODE_MASK 0x03 > +#define YHGCH_PW_MODE_CTL_MODE_SHIFT 0 > + > +#define YHGCH_PW_MODE_CTL_MODE_MODE0 0 > +#define YHGCH_PW_MODE_CTL_MODE_MODE1 1 > +#define YHGCH_PW_MODE_CTL_MODE_SLEEP 2 > + > +//#define YHGCH_CRT_PLL_CTRL 0x000060 > + > +#define YHGCH_PLL_CTRL_BYPASS(x) ((x) << 18) > +#define YHGCH_PLL_CTRL_BYPASS_MASK 0x40000 > + > +#define YHGCH_PLL_CTRL_POWER(x) ((x) << 17) > +#define YHGCH_PLL_CTRL_POWER_MASK 0x20000 > + > +#define YHGCH_PLL_CTRL_INPUT(x) ((x) << 16) > +#define YHGCH_PLL_CTRL_INPUT_MASK 0x10000 > + > +#define YHGCH_PLL_CTRL_POD(x) ((x) << 14) > +#define YHGCH_PLL_CTRL_POD_MASK 0xC000 > + > +#define YHGCH_PLL_CTRL_OD(x) ((x) << 12) > +#define YHGCH_PLL_CTRL_OD_MASK 0x3000 > + > +#define YHGCH_PLL_CTRL_N(x) ((x) << 8) > +#define YHGCH_PLL_CTRL_N_MASK 0xF00 > + > +#define YHGCH_PLL_CTRL_M(x) ((x) << 0) > +#define YHGCH_PLL_CTRL_M_MASK 0xFF > + > +#define YHGCH_CRT_DISP_CTL 0x80200 > + > +#define YHGCH_CRT_DISP_CTL_DPMS(x) ((x) << 30) > +#define YHGCH_CRT_DISP_CTL_DPMS_MASK 0xc0000000 > + > +#define YHGCH_CRT_DPMS_ON 0 > +#define YHGCH_CRT_DPMS_OFF 3 > + > +#define YHGCH_CRT_DISP_CTL_CRTSELECT(x) ((x) << 25) > +#define YHGCH_CRT_DISP_CTL_CRTSELECT_MASK 0x2000000 > + > +#define YHGCH_CRTSELECT_CRT 1 > + > +#define YHGCH_CRT_DISP_CTL_CLOCK_PHASE(x) ((x) << 14) > +#define YHGCH_CRT_DISP_CTL_CLOCK_PHASE_MASK 0x4000 > + > +#define YHGCH_CRT_DISP_CTL_VSYNC_PHASE(x) ((x) << 13) > +#define YHGCH_CRT_DISP_CTL_VSYNC_PHASE_MASK 0x2000 > + > +#define YHGCH_CRT_DISP_CTL_HSYNC_PHASE(x) ((x) << 12) > +#define YHGCH_CRT_DISP_CTL_HSYNC_PHASE_MASK 0x1000 > + > +#define YHGCH_CRT_DISP_CTL_TIMING(x) ((x) << 8) > +#define YHGCH_CRT_DISP_CTL_TIMING_MASK 0x100 > + > +#define YHGCH_CRT_DISP_CTL_PLANE(x) ((x) << 2) > +#define YHGCH_CRT_DISP_CTL_PLANE_MASK 4 > + > +#define YHGCH_CRT_DISP_CTL_FORMAT(x) ((x) << 0) > +#define YHGCH_CRT_DISP_CTL_FORMAT_MASK 0x03 > + > +#define YHGCH_CRT_FB_ADDRESS 0x080204 > + > +#define YHGCH_CRT_FB_WIDTH 0x080208 > +#define YHGCH_CRT_FB_WIDTH_WIDTH(x) ((x) << 16) > +#define YHGCH_CRT_FB_WIDTH_WIDTH_MASK 0x3FFF0000 > +#define YHGCH_CRT_FB_WIDTH_OFFS(x) ((x) << 0) > +#define YHGCH_CRT_FB_WIDTH_OFFS_MASK 0x3FFF > + > +#define YHGCH_CRT_HORZ_TOTAL 0x08020C > +#define YHGCH_CRT_HORZ_TOTAL_TOTAL(x) ((x) << 16) > +#define YHGCH_CRT_HORZ_TOTAL_TOTAL_MASK 0xFFF0000 > + > +#define YHGCH_CRT_HORZ_TOTAL_DISP_END(x) ((x) << 0) > +#define YHGCH_CRT_HORZ_TOTAL_DISP_END_MASK 0xFFF > + > +#define YHGCH_CRT_HORZ_SYNC 0x080210 > +#define YHGCH_CRT_HORZ_SYNC_WIDTH(x) ((x) << 16) > +#define YHGCH_CRT_HORZ_SYNC_WIDTH_MASK 0xFF0000 > + > +#define YHGCH_CRT_HORZ_SYNC_START(x) ((x) << 0) > +#define YHGCH_CRT_HORZ_SYNC_START_MASK 0xFFF > + > +#define YHGCH_CRT_VERT_TOTAL 0x080214 > +#define YHGCH_CRT_VERT_TOTAL_TOTAL(x) ((x) << 16) > +#define YHGCH_CRT_VERT_TOTAL_TOTAL_MASK 0x7FFF0000 > + > +#define YHGCH_CRT_VERT_TOTAL_DISP_END(x) ((x) << 0) > +#define YHGCH_CRT_VERT_TOTAL_DISP_END_MASK 0x7FF > + > +#define YHGCH_CRT_VERT_SYNC 0x080218 > +#define YHGCH_CRT_VERT_SYNC_HEIGHT(x) ((x) << 16) > +#define YHGCH_CRT_VERT_SYNC_HEIGHT_MASK 0x3F0000 > + > +#define YHGCH_CRT_VERT_SYNC_START(x) ((x) << 0) > +#define YHGCH_CRT_VERT_SYNC_START_MASK 0x7FF > + > +/* Hardware Cursor */ > +#define YHGCH_HWC_ADDRESS 0x080230 > +#define YHGCH_HWC_ADDRESS_ENABLE(x) ((x) << 31) > +#define YHGCH_HWC_ADDRESS_ENABLE_MASK 0x80000000 > +#define YHGCH_HWC_ADDRESS_ADDRESS(x) ((x) << 0) > +#define YHGCH_HWC_ADDRESS_ADDRESS_MASK 0xFFFFFFF > + > +#define YHGCH_HWC_LOCATION 0x080234 > +#define YHGCH_HWC_LOCATION_TOP(x) ((x) << 27) > +#define YHGCH_HWC_LOCATION_TOP_MASK 0x8000000 > +#define YHGCH_HWC_LOCATION_Y(x) ((x) << 16) > +#define YHGCH_HWC_LOCATION_Y_MASK 0x7FF0000 > +#define YHGCH_HWC_LOCATION_LEFT(x) ((x) << 11) > +#define YHGCH_HWC_LOCATION_LEFT_MASK 0x800 > +#define YHGCH_HWC_LOCATION_X(x) ((x) << 0) > +#define YHGCH_HWC_LOCATION_X_MASK 0x7FF > + > +#define YHGCH_HWC_COLOR_12 0x080238 > +#define YHGCH_HWC_COLOR_12_2_RGB(x) ((x) << 16) > +#define YHGCH_HWC_COLOR_12_2_RGB_MASK 0xFFFF0000 > +#define YHGCH_HWC_COLOR_12_1_RGB(x) ((x) << 0) > +#define YHGCH_HWC_COLOR_12_1_RGB_MASK 0xFFFF > + > +#define YHGCH_HWC_COLOR_3 0x08023C > +#define YHGCH_HWC_COLOR_3_RGB(x) ((x) << 0) > +#define YHGCH_HWC_COLOR_3_RGB_MASK 0xFFFF > + > +/* Auto Centering */ > +#define YHGCH_CRT_AUTO_CENTERING_TL 0x080280 > +#define YHGCH_CRT_AUTO_CENTERING_TL_TOP(x) ((x) << 16) > +#define YHGCH_CRT_AUTO_CENTERING_TL_TOP_MASK 0x7FF0000 > + > +#define YHGCH_CRT_AUTO_CENTERING_TL_LEFT(x) ((x) << 0) > +#define YHGCH_CRT_AUTO_CENTERING_TL_LEFT_MASK 0x7FF > + > +#define YHGCH_CRT_AUTO_CENTERING_BR 0x080284 > +#define YHGCH_CRT_AUTO_CENTERING_BR_BOTTOM(x) ((x) << 16) > +#define YHGCH_CRT_AUTO_CENTERING_BR_BOTTOM_MASK 0x7FF0000 > + > +#define YHGCH_CRT_AUTO_CENTERING_BR_RIGHT(x) ((x) << 0) > +#define YHGCH_CRT_AUTO_CENTERING_BR_RIGHT_MASK 0x7FF > + > +/* register to control panel output */ > +#define YHGCH_DISPLAY_CONTROL_HISILE 0x80288 > +#define YHGCH_DISPLAY_CONTROL_FPVDDEN(x) ((x) << 0) > +#define YHGCH_DISPLAY_CONTROL_PANELDATE(x) ((x) << 1) > +#define YHGCH_DISPLAY_CONTROL_FPEN(x) ((x) << 2) > +#define YHGCH_DISPLAY_CONTROL_VBIASEN(x) ((x) << 3) > + > +#define YHGCH_RAW_INTERRUPT 0x80290 > +#define YHGCH_RAW_INTERRUPT_VBLANK(x) ((x) << 2) > +#define YHGCH_RAW_INTERRUPT_VBLANK_MASK 0x4 > + > +#define YHGCH_RAW_INTERRUPT_EN 0x80298 > +#define YHGCH_RAW_INTERRUPT_EN_VBLANK(x) ((x) << 2) > +#define YHGCH_RAW_INTERRUPT_EN_VBLANK_MASK 0x4 > + > +/* register and values for PLL control */ > +#define CRT_PLL1_NS 0x802a8 > +#define CRT_PLL1_NS_OUTER_BYPASS(x) ((x) << 30) > +#define CRT_PLL1_NS_INTER_BYPASS(x) ((x) << 29) > +#define CRT_PLL1_NS_POWERON(x) ((x) << 24) > + > +#define CRT_PLL1_NS_25MHZ 0x00006691 //640x480 > +#define CRT_PLL1_NS_40MHZ 0x00004580 //800x600 > +#define CRT_PLL1_NS_65MHZ 0x00002568 //1024x768 > +#define CRT_PLL1_NS_83MHZ 0x000027bb //1280x800 > +#define CRT_PLL1_NS_106MHZ 0x000027ef //1440x900 > +#define CRT_PLL1_NS_108MHZ 0x000027f2 //1280x1024 > +#define CRT_PLL1_NS_146MHZ 0x00001575 //1680x1050 > +#define CRT_PLL1_NS_148MHZ 0x0000145f //1920x1080 > +#define CRT_PLL1_NS_193MHZ 0x000018f7 //1920x1200 > + > +#define CRT_PLL2_NS 0x802ac > +#define CRT_PLL2_NS_25MHZ 0x0 > +#define CRT_PLL2_NS_40MHZ 0x0 > +#define CRT_PLL2_NS_65MHZ 0x0 > +#define CRT_PLL2_NS_83MHZ 0x0 > +#define CRT_PLL2_NS_106MHZ 0x0 > +#define CRT_PLL2_NS_108MHZ 0x0 > +#define CRT_PLL2_NS_146MHZ 0x0 > +#define CRT_PLL2_NS_148MHZ 0x0 > +#define CRT_PLL2_NS_193MHZ 0x0 > + > +#define YHGCH_FIELD(field, value) (field(value) & field##_MASK) > +#endif > diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_vdac.c b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_vdac.c > new file mode 100644 > index 000000000000..6aaef773b7d1 > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_vdac.c > @@ -0,0 +1,111 @@ > +// SPDX-License-Identifier: GPL-2.0 > + > +#include <linux/io.h> > + > +#include <drm/drm_atomic_helper.h> > +#include <drm/drm_edid.h> > +#include <drm/drm_probe_helper.h> > +#include <drm/drm_print.h> > +#include <drm/drm_simple_kms_helper.h> > + > +#include "yhgch_drm_drv.h" > +#include "yhgch_drm_regs.h" > + > +static int yhgch_connector_get_modes(struct drm_connector *connector) > +{ > + int count; > + void *edid; > + struct yhgch_vdac *yhgch_vdac = to_yhgch_vdac(connector); > + > + edid = drm_get_edid(connector, &yhgch_vdac->adapter); > + if (edid) { > + drm_connector_update_edid_property(connector, edid); > + count = drm_add_edid_modes(connector, edid); > + if (count) > + goto out; > + } > + > + count = drm_add_modes_noedid(connector, > + connector->dev->mode_config.max_width, > + connector->dev->mode_config.max_height); > + drm_set_preferred_mode(connector, 1024, 768); > + > +out: > + kfree(edid); > + return count; > +} > + > +static const struct drm_connector_helper_funcs > + yhgch_connector_helper_funcs = { > + .get_modes = yhgch_connector_get_modes, > + .detect_ctx = drm_connector_helper_detect_from_ddc, > +}; > + > +static const struct drm_connector_funcs yhgch_connector_funcs = { > + .fill_modes = drm_helper_probe_single_connector_modes, > + .destroy = drm_connector_cleanup, > + .reset = drm_atomic_helper_connector_reset, > + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, > + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, > +}; > + > +static void yhgch_encoder_mode_set(struct drm_encoder *encoder, > + struct drm_display_mode *mode, > + struct drm_display_mode *adj_mode) > +{ > + u32 reg; > + struct drm_device *dev = encoder->dev; > + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); > + > + reg = readl(priv->mmio + YHGCH_DISPLAY_CONTROL_HISILE); > + reg |= YHGCH_DISPLAY_CONTROL_FPVDDEN(1); > + reg |= YHGCH_DISPLAY_CONTROL_PANELDATE(1); > + reg |= YHGCH_DISPLAY_CONTROL_FPEN(1); > + reg |= YHGCH_DISPLAY_CONTROL_VBIASEN(1); > + writel(reg, priv->mmio + YHGCH_DISPLAY_CONTROL_HISILE); This doesn't look like setting the mode. Please consider using .enable / .atomic_enable() instead. > +} > + > +static const struct drm_encoder_helper_funcs yhgch_encoder_helper_funcs = { > + .mode_set = yhgch_encoder_mode_set, > +}; > + > +int yhgch_vdac_init(struct yhgch_drm_private *priv) > +{ > + struct drm_device *dev = &priv->dev; > + struct yhgch_vdac *yhgch_vdac = &priv->vdac; > + struct drm_encoder *encoder = &priv->encoder; > + struct drm_crtc *crtc = &priv->crtc; > + struct drm_connector *connector = &yhgch_vdac->base; > + int ret; > + > + ret = yhgch_ddc_create(dev, yhgch_vdac); > + if (ret) { > + drm_err(dev, "failed to create ddc: %d\n", ret); > + return ret; > + } > + > + encoder->possible_crtcs = drm_crtc_mask(crtc); > + ret = drmm_encoder_init(dev, encoder, NULL, DRM_MODE_ENCODER_DAC, NULL); > + if (ret) { > + drm_err(dev, "failed to init encoder: %d\n", ret); > + return ret; > + } > + > + drm_encoder_helper_add(encoder, &yhgch_encoder_helper_funcs); > + > + ret = drm_connector_init_with_ddc(dev, > + connector, > + &yhgch_connector_funcs, > + DRM_MODE_CONNECTOR_VGA, > + &yhgch_vdac->adapter); > + if (ret) { > + drm_err(dev, "failed to init connector: %d\n", ret); > + return ret; > + } > + drm_connector_helper_add(connector, &yhgch_connector_helper_funcs); > + connector->polled = DRM_CONNECTOR_POLL_CONNECT | DRM_CONNECTOR_POLL_DISCONNECT; > + > + drm_connector_attach_encoder(connector, encoder); > + > + return 0; > +} > -- > 2.43.5 > -- With best wishes Dmitry ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH v3 1/1] [DRIVER] gpu: drm: add support for Yhgc ZX1000 soc chipset 2025-09-10 2:23 ` [PATCH v3 1/1] [DRIVER] " Chu Guangqing 2025-09-11 0:44 ` Dmitry Baryshkov @ 2025-09-11 7:25 ` Thomas Zimmermann 2025-09-24 6:49 ` [PATCH v4 0/1] " Chu Guangqing 1 sibling, 1 reply; 22+ messages in thread From: Thomas Zimmermann @ 2025-09-11 7:25 UTC (permalink / raw) To: Chu Guangqing, maarten.lankhorst, mripard, airlied, simona Cc: linux-kernel, dri-devel Hi Am 10.09.25 um 04:23 schrieb Chu Guangqing: > + select DRM_VRAM_HELPER > + select DRM_TTM_HELPER I told you twice that VRAM helpers are obsolete and what to use instead. > + > +struct yhgch_vdac { > + struct drm_connector base; > + struct i2c_adapter adapter; > + struct i2c_algo_bit_data bit_data; > +}; I've asked you several times whether to adopt the coding style in ast/mgag200 for the DDC. No only that you not respond to to any of my reviews, you keep on submitting the same code again and again. Linux kernel development does not work like that. NAK on this driver until you get your act together. Best regards Thomas > + > +struct yhgch_drm_private { > + /* hw */ > + void __iomem *mmio; > + > + /* drm */ > + struct drm_device dev; > + struct drm_plane primary_plane; > + struct drm_crtc crtc; > + struct drm_encoder encoder; > + struct yhgch_vdac vdac; > +}; > + > +static inline struct yhgch_vdac *to_yhgch_vdac(struct drm_connector *connector) > +{ > + return container_of(connector, struct yhgch_vdac, base); > +} > + > +static inline struct yhgch_drm_private *to_yhgch_drm_private(struct drm_device *dev) > +{ > + return container_of(dev, struct yhgch_drm_private, dev); > +} > + > +void yhgch_set_power_mode(struct yhgch_drm_private *priv, > + u32 power_mode); > +void yhgch_set_current_gate(struct yhgch_drm_private *priv, > + u32 gate); > + > +int yhgch_de_init(struct yhgch_drm_private *priv); > +int yhgch_vdac_init(struct yhgch_drm_private *priv); > +int yhgch_mm_init(struct yhgch_drm_private *yhgch); > +int yhgch_ddc_create(struct drm_device *drm_dev, struct yhgch_vdac *connector); > + > +int yhgch_dumb_create(struct drm_file *file, struct drm_device *dev, > + struct drm_mode_create_dumb *args); > + > +#endif > diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_i2c.c b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_i2c.c > new file mode 100644 > index 000000000000..57f40efc60c1 > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_i2c.c > @@ -0,0 +1,108 @@ > +// SPDX-License-Identifier: GPL-2.0-or-later > + > +#include <linux/delay.h> > +#include <linux/pci.h> > + > +#include <drm/drm_atomic_helper.h> > +#include <drm/drm_probe_helper.h> > + > +#include <drm/drm_managed.h> > + > +#include "yhgch_drm_drv.h" > + > +#define GPIO_DATA 0x0802A0 > +#define GPIO_DATA_DIRECTION 0x0802A4 > + > +#define I2C_SCL_MASK BIT(0) > +#define I2C_SDA_MASK BIT(1) > + > +static void yhgch_set_i2c_signal(void *data, u32 mask, int value) > +{ > + struct yhgch_vdac *yhgch_vdac = data; > + struct yhgch_drm_private *priv = to_yhgch_drm_private(yhgch_vdac->base.dev); > + u32 tmp_dir = readl(priv->mmio + GPIO_DATA_DIRECTION); > + > + if (value) { > + tmp_dir &= ~mask; > + writel(tmp_dir, priv->mmio + GPIO_DATA_DIRECTION); > + } else { > + u32 tmp_data = readl(priv->mmio + GPIO_DATA); > + > + tmp_data &= ~mask; > + writel(tmp_data, priv->mmio + GPIO_DATA); > + > + tmp_dir |= mask; > + writel(tmp_dir, priv->mmio + GPIO_DATA_DIRECTION); > + } > +} > + > +static int yhgch_get_i2c_signal(void *data, u32 mask) > +{ > + struct yhgch_vdac *yhgch_vdac = data; > + struct yhgch_drm_private *priv = to_yhgch_drm_private(yhgch_vdac->base.dev); > + u32 tmp_dir = readl(priv->mmio + GPIO_DATA_DIRECTION); > + > + if ((tmp_dir & mask) != mask) { > + tmp_dir &= ~mask; > + writel(tmp_dir, priv->mmio + GPIO_DATA_DIRECTION); > + } > + > + return (readl(priv->mmio + GPIO_DATA) & mask) ? 1 : 0; > +} > + > +static void yhgch_ddc_setsda(void *data, int state) > +{ > + yhgch_set_i2c_signal(data, I2C_SDA_MASK, state); > +} > + > +static void yhgch_ddc_setscl(void *data, int state) > +{ > + yhgch_set_i2c_signal(data, I2C_SCL_MASK, state); > +} > + > +static int yhgch_ddc_getsda(void *data) > +{ > + return yhgch_get_i2c_signal(data, I2C_SDA_MASK); > +} > + > +static int yhgch_ddc_getscl(void *data) > +{ > + return yhgch_get_i2c_signal(data, I2C_SCL_MASK); > +} > + > +static void yhgch_ddc_release(struct drm_device *dev, void *res) > +{ > + struct yhgch_vdac *yhgch_vdac = res; > + > + i2c_del_adapter(&yhgch_vdac->adapter); > +} > + > +int yhgch_ddc_create(struct drm_device *drm_dev, > + struct yhgch_vdac *yhgch_vdac) > +{ > + int ret = 0; > + > + yhgch_vdac->adapter.owner = THIS_MODULE; > + snprintf(yhgch_vdac->adapter.name, I2C_NAME_SIZE, "INS i2c bit bus"); > + yhgch_vdac->adapter.dev.parent = drm_dev->dev; > + i2c_set_adapdata(&yhgch_vdac->adapter, yhgch_vdac); > + yhgch_vdac->adapter.algo_data = &yhgch_vdac->bit_data; > + > + yhgch_vdac->bit_data.udelay = 20; > + yhgch_vdac->bit_data.timeout = usecs_to_jiffies(2000); > + yhgch_vdac->bit_data.data = yhgch_vdac; > + yhgch_vdac->bit_data.setsda = yhgch_ddc_setsda; > + yhgch_vdac->bit_data.setscl = yhgch_ddc_setscl; > + yhgch_vdac->bit_data.getsda = yhgch_ddc_getsda; > + yhgch_vdac->bit_data.getscl = yhgch_ddc_getscl; > + > + ret = i2c_bit_add_bus(&yhgch_vdac->adapter); > + if (ret) > + return ret; > + > + ret = drmm_add_action_or_reset(drm_dev, yhgch_ddc_release, yhgch_vdac); > + if (ret) > + return ret; > + > + return ret; > +} > diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_regs.h b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_regs.h > new file mode 100644 > index 000000000000..d707f5186ab4 > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_regs.h > @@ -0,0 +1,209 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > + > +#ifndef YHGCH_DRM_HW_H > +#define YHGCH_DRM_HW_H > + > +/* register definition */ > +#define YHGCH_MISC_CTRL 0x4 > + > +#define YHGCH_MSCCTL_LOCALMEM_RESET(x) ((x) << 6) > +#define YHGCH_MSCCTL_LOCALMEM_RESET_MASK 0x40 > + > +#define YHGCH_CURRENT_GATE 0x000040 > +#define YHGCH_CURR_GATE_DISPLAY(x) ((x) << 2) > +#define YHGCH_CURR_GATE_DISPLAY_MASK 0x4 > + > +#define YHGCH_CURR_GATE_LOCALMEM(x) ((x) << 1) > +#define YHGCH_CURR_GATE_LOCALMEM_MASK 0x2 > + > +#define YHGCH_MODE0_GATE 0x000044 > +#define YHGCH_MODE1_GATE 0x000048 > +#define YHGCH_POWER_MODE_CTRL 0x00004C > + > +#define YHGCH_PW_MODE_CTL_OSC_INPUT(x) ((x) << 3) > +#define YHGCH_PW_MODE_CTL_OSC_INPUT_MASK 0x8 > + > +#define YHGCH_PW_MODE_CTL_MODE(x) ((x) << 0) > +#define YHGCH_PW_MODE_CTL_MODE_MASK 0x03 > +#define YHGCH_PW_MODE_CTL_MODE_SHIFT 0 > + > +#define YHGCH_PW_MODE_CTL_MODE_MODE0 0 > +#define YHGCH_PW_MODE_CTL_MODE_MODE1 1 > +#define YHGCH_PW_MODE_CTL_MODE_SLEEP 2 > + > +//#define YHGCH_CRT_PLL_CTRL 0x000060 > + > +#define YHGCH_PLL_CTRL_BYPASS(x) ((x) << 18) > +#define YHGCH_PLL_CTRL_BYPASS_MASK 0x40000 > + > +#define YHGCH_PLL_CTRL_POWER(x) ((x) << 17) > +#define YHGCH_PLL_CTRL_POWER_MASK 0x20000 > + > +#define YHGCH_PLL_CTRL_INPUT(x) ((x) << 16) > +#define YHGCH_PLL_CTRL_INPUT_MASK 0x10000 > + > +#define YHGCH_PLL_CTRL_POD(x) ((x) << 14) > +#define YHGCH_PLL_CTRL_POD_MASK 0xC000 > + > +#define YHGCH_PLL_CTRL_OD(x) ((x) << 12) > +#define YHGCH_PLL_CTRL_OD_MASK 0x3000 > + > +#define YHGCH_PLL_CTRL_N(x) ((x) << 8) > +#define YHGCH_PLL_CTRL_N_MASK 0xF00 > + > +#define YHGCH_PLL_CTRL_M(x) ((x) << 0) > +#define YHGCH_PLL_CTRL_M_MASK 0xFF > + > +#define YHGCH_CRT_DISP_CTL 0x80200 > + > +#define YHGCH_CRT_DISP_CTL_DPMS(x) ((x) << 30) > +#define YHGCH_CRT_DISP_CTL_DPMS_MASK 0xc0000000 > + > +#define YHGCH_CRT_DPMS_ON 0 > +#define YHGCH_CRT_DPMS_OFF 3 > + > +#define YHGCH_CRT_DISP_CTL_CRTSELECT(x) ((x) << 25) > +#define YHGCH_CRT_DISP_CTL_CRTSELECT_MASK 0x2000000 > + > +#define YHGCH_CRTSELECT_CRT 1 > + > +#define YHGCH_CRT_DISP_CTL_CLOCK_PHASE(x) ((x) << 14) > +#define YHGCH_CRT_DISP_CTL_CLOCK_PHASE_MASK 0x4000 > + > +#define YHGCH_CRT_DISP_CTL_VSYNC_PHASE(x) ((x) << 13) > +#define YHGCH_CRT_DISP_CTL_VSYNC_PHASE_MASK 0x2000 > + > +#define YHGCH_CRT_DISP_CTL_HSYNC_PHASE(x) ((x) << 12) > +#define YHGCH_CRT_DISP_CTL_HSYNC_PHASE_MASK 0x1000 > + > +#define YHGCH_CRT_DISP_CTL_TIMING(x) ((x) << 8) > +#define YHGCH_CRT_DISP_CTL_TIMING_MASK 0x100 > + > +#define YHGCH_CRT_DISP_CTL_PLANE(x) ((x) << 2) > +#define YHGCH_CRT_DISP_CTL_PLANE_MASK 4 > + > +#define YHGCH_CRT_DISP_CTL_FORMAT(x) ((x) << 0) > +#define YHGCH_CRT_DISP_CTL_FORMAT_MASK 0x03 > + > +#define YHGCH_CRT_FB_ADDRESS 0x080204 > + > +#define YHGCH_CRT_FB_WIDTH 0x080208 > +#define YHGCH_CRT_FB_WIDTH_WIDTH(x) ((x) << 16) > +#define YHGCH_CRT_FB_WIDTH_WIDTH_MASK 0x3FFF0000 > +#define YHGCH_CRT_FB_WIDTH_OFFS(x) ((x) << 0) > +#define YHGCH_CRT_FB_WIDTH_OFFS_MASK 0x3FFF > + > +#define YHGCH_CRT_HORZ_TOTAL 0x08020C > +#define YHGCH_CRT_HORZ_TOTAL_TOTAL(x) ((x) << 16) > +#define YHGCH_CRT_HORZ_TOTAL_TOTAL_MASK 0xFFF0000 > + > +#define YHGCH_CRT_HORZ_TOTAL_DISP_END(x) ((x) << 0) > +#define YHGCH_CRT_HORZ_TOTAL_DISP_END_MASK 0xFFF > + > +#define YHGCH_CRT_HORZ_SYNC 0x080210 > +#define YHGCH_CRT_HORZ_SYNC_WIDTH(x) ((x) << 16) > +#define YHGCH_CRT_HORZ_SYNC_WIDTH_MASK 0xFF0000 > + > +#define YHGCH_CRT_HORZ_SYNC_START(x) ((x) << 0) > +#define YHGCH_CRT_HORZ_SYNC_START_MASK 0xFFF > + > +#define YHGCH_CRT_VERT_TOTAL 0x080214 > +#define YHGCH_CRT_VERT_TOTAL_TOTAL(x) ((x) << 16) > +#define YHGCH_CRT_VERT_TOTAL_TOTAL_MASK 0x7FFF0000 > + > +#define YHGCH_CRT_VERT_TOTAL_DISP_END(x) ((x) << 0) > +#define YHGCH_CRT_VERT_TOTAL_DISP_END_MASK 0x7FF > + > +#define YHGCH_CRT_VERT_SYNC 0x080218 > +#define YHGCH_CRT_VERT_SYNC_HEIGHT(x) ((x) << 16) > +#define YHGCH_CRT_VERT_SYNC_HEIGHT_MASK 0x3F0000 > + > +#define YHGCH_CRT_VERT_SYNC_START(x) ((x) << 0) > +#define YHGCH_CRT_VERT_SYNC_START_MASK 0x7FF > + > +/* Hardware Cursor */ > +#define YHGCH_HWC_ADDRESS 0x080230 > +#define YHGCH_HWC_ADDRESS_ENABLE(x) ((x) << 31) > +#define YHGCH_HWC_ADDRESS_ENABLE_MASK 0x80000000 > +#define YHGCH_HWC_ADDRESS_ADDRESS(x) ((x) << 0) > +#define YHGCH_HWC_ADDRESS_ADDRESS_MASK 0xFFFFFFF > + > +#define YHGCH_HWC_LOCATION 0x080234 > +#define YHGCH_HWC_LOCATION_TOP(x) ((x) << 27) > +#define YHGCH_HWC_LOCATION_TOP_MASK 0x8000000 > +#define YHGCH_HWC_LOCATION_Y(x) ((x) << 16) > +#define YHGCH_HWC_LOCATION_Y_MASK 0x7FF0000 > +#define YHGCH_HWC_LOCATION_LEFT(x) ((x) << 11) > +#define YHGCH_HWC_LOCATION_LEFT_MASK 0x800 > +#define YHGCH_HWC_LOCATION_X(x) ((x) << 0) > +#define YHGCH_HWC_LOCATION_X_MASK 0x7FF > + > +#define YHGCH_HWC_COLOR_12 0x080238 > +#define YHGCH_HWC_COLOR_12_2_RGB(x) ((x) << 16) > +#define YHGCH_HWC_COLOR_12_2_RGB_MASK 0xFFFF0000 > +#define YHGCH_HWC_COLOR_12_1_RGB(x) ((x) << 0) > +#define YHGCH_HWC_COLOR_12_1_RGB_MASK 0xFFFF > + > +#define YHGCH_HWC_COLOR_3 0x08023C > +#define YHGCH_HWC_COLOR_3_RGB(x) ((x) << 0) > +#define YHGCH_HWC_COLOR_3_RGB_MASK 0xFFFF > + > +/* Auto Centering */ > +#define YHGCH_CRT_AUTO_CENTERING_TL 0x080280 > +#define YHGCH_CRT_AUTO_CENTERING_TL_TOP(x) ((x) << 16) > +#define YHGCH_CRT_AUTO_CENTERING_TL_TOP_MASK 0x7FF0000 > + > +#define YHGCH_CRT_AUTO_CENTERING_TL_LEFT(x) ((x) << 0) > +#define YHGCH_CRT_AUTO_CENTERING_TL_LEFT_MASK 0x7FF > + > +#define YHGCH_CRT_AUTO_CENTERING_BR 0x080284 > +#define YHGCH_CRT_AUTO_CENTERING_BR_BOTTOM(x) ((x) << 16) > +#define YHGCH_CRT_AUTO_CENTERING_BR_BOTTOM_MASK 0x7FF0000 > + > +#define YHGCH_CRT_AUTO_CENTERING_BR_RIGHT(x) ((x) << 0) > +#define YHGCH_CRT_AUTO_CENTERING_BR_RIGHT_MASK 0x7FF > + > +/* register to control panel output */ > +#define YHGCH_DISPLAY_CONTROL_HISILE 0x80288 > +#define YHGCH_DISPLAY_CONTROL_FPVDDEN(x) ((x) << 0) > +#define YHGCH_DISPLAY_CONTROL_PANELDATE(x) ((x) << 1) > +#define YHGCH_DISPLAY_CONTROL_FPEN(x) ((x) << 2) > +#define YHGCH_DISPLAY_CONTROL_VBIASEN(x) ((x) << 3) > + > +#define YHGCH_RAW_INTERRUPT 0x80290 > +#define YHGCH_RAW_INTERRUPT_VBLANK(x) ((x) << 2) > +#define YHGCH_RAW_INTERRUPT_VBLANK_MASK 0x4 > + > +#define YHGCH_RAW_INTERRUPT_EN 0x80298 > +#define YHGCH_RAW_INTERRUPT_EN_VBLANK(x) ((x) << 2) > +#define YHGCH_RAW_INTERRUPT_EN_VBLANK_MASK 0x4 > + > +/* register and values for PLL control */ > +#define CRT_PLL1_NS 0x802a8 > +#define CRT_PLL1_NS_OUTER_BYPASS(x) ((x) << 30) > +#define CRT_PLL1_NS_INTER_BYPASS(x) ((x) << 29) > +#define CRT_PLL1_NS_POWERON(x) ((x) << 24) > + > +#define CRT_PLL1_NS_25MHZ 0x00006691 //640x480 > +#define CRT_PLL1_NS_40MHZ 0x00004580 //800x600 > +#define CRT_PLL1_NS_65MHZ 0x00002568 //1024x768 > +#define CRT_PLL1_NS_83MHZ 0x000027bb //1280x800 > +#define CRT_PLL1_NS_106MHZ 0x000027ef //1440x900 > +#define CRT_PLL1_NS_108MHZ 0x000027f2 //1280x1024 > +#define CRT_PLL1_NS_146MHZ 0x00001575 //1680x1050 > +#define CRT_PLL1_NS_148MHZ 0x0000145f //1920x1080 > +#define CRT_PLL1_NS_193MHZ 0x000018f7 //1920x1200 > + > +#define CRT_PLL2_NS 0x802ac > +#define CRT_PLL2_NS_25MHZ 0x0 > +#define CRT_PLL2_NS_40MHZ 0x0 > +#define CRT_PLL2_NS_65MHZ 0x0 > +#define CRT_PLL2_NS_83MHZ 0x0 > +#define CRT_PLL2_NS_106MHZ 0x0 > +#define CRT_PLL2_NS_108MHZ 0x0 > +#define CRT_PLL2_NS_146MHZ 0x0 > +#define CRT_PLL2_NS_148MHZ 0x0 > +#define CRT_PLL2_NS_193MHZ 0x0 > + > +#define YHGCH_FIELD(field, value) (field(value) & field##_MASK) > +#endif > diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_vdac.c b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_vdac.c > new file mode 100644 > index 000000000000..6aaef773b7d1 > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_vdac.c > @@ -0,0 +1,111 @@ > +// SPDX-License-Identifier: GPL-2.0 > + > +#include <linux/io.h> > + > +#include <drm/drm_atomic_helper.h> > +#include <drm/drm_edid.h> > +#include <drm/drm_probe_helper.h> > +#include <drm/drm_print.h> > +#include <drm/drm_simple_kms_helper.h> > + > +#include "yhgch_drm_drv.h" > +#include "yhgch_drm_regs.h" > + > +static int yhgch_connector_get_modes(struct drm_connector *connector) > +{ > + int count; > + void *edid; > + struct yhgch_vdac *yhgch_vdac = to_yhgch_vdac(connector); > + > + edid = drm_get_edid(connector, &yhgch_vdac->adapter); > + if (edid) { > + drm_connector_update_edid_property(connector, edid); > + count = drm_add_edid_modes(connector, edid); > + if (count) > + goto out; > + } > + > + count = drm_add_modes_noedid(connector, > + connector->dev->mode_config.max_width, > + connector->dev->mode_config.max_height); > + drm_set_preferred_mode(connector, 1024, 768); > + > +out: > + kfree(edid); > + return count; > +} > + > +static const struct drm_connector_helper_funcs > + yhgch_connector_helper_funcs = { > + .get_modes = yhgch_connector_get_modes, > + .detect_ctx = drm_connector_helper_detect_from_ddc, > +}; > + > +static const struct drm_connector_funcs yhgch_connector_funcs = { > + .fill_modes = drm_helper_probe_single_connector_modes, > + .destroy = drm_connector_cleanup, > + .reset = drm_atomic_helper_connector_reset, > + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, > + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, > +}; > + > +static void yhgch_encoder_mode_set(struct drm_encoder *encoder, > + struct drm_display_mode *mode, > + struct drm_display_mode *adj_mode) > +{ > + u32 reg; > + struct drm_device *dev = encoder->dev; > + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); > + > + reg = readl(priv->mmio + YHGCH_DISPLAY_CONTROL_HISILE); > + reg |= YHGCH_DISPLAY_CONTROL_FPVDDEN(1); > + reg |= YHGCH_DISPLAY_CONTROL_PANELDATE(1); > + reg |= YHGCH_DISPLAY_CONTROL_FPEN(1); > + reg |= YHGCH_DISPLAY_CONTROL_VBIASEN(1); > + writel(reg, priv->mmio + YHGCH_DISPLAY_CONTROL_HISILE); > +} > + > +static const struct drm_encoder_helper_funcs yhgch_encoder_helper_funcs = { > + .mode_set = yhgch_encoder_mode_set, > +}; > + > +int yhgch_vdac_init(struct yhgch_drm_private *priv) > +{ > + struct drm_device *dev = &priv->dev; > + struct yhgch_vdac *yhgch_vdac = &priv->vdac; > + struct drm_encoder *encoder = &priv->encoder; > + struct drm_crtc *crtc = &priv->crtc; > + struct drm_connector *connector = &yhgch_vdac->base; > + int ret; > + > + ret = yhgch_ddc_create(dev, yhgch_vdac); > + if (ret) { > + drm_err(dev, "failed to create ddc: %d\n", ret); > + return ret; > + } > + > + encoder->possible_crtcs = drm_crtc_mask(crtc); > + ret = drmm_encoder_init(dev, encoder, NULL, DRM_MODE_ENCODER_DAC, NULL); > + if (ret) { > + drm_err(dev, "failed to init encoder: %d\n", ret); > + return ret; > + } > + > + drm_encoder_helper_add(encoder, &yhgch_encoder_helper_funcs); > + > + ret = drm_connector_init_with_ddc(dev, > + connector, > + &yhgch_connector_funcs, > + DRM_MODE_CONNECTOR_VGA, > + &yhgch_vdac->adapter); > + if (ret) { > + drm_err(dev, "failed to init connector: %d\n", ret); > + return ret; > + } > + drm_connector_helper_add(connector, &yhgch_connector_helper_funcs); > + connector->polled = DRM_CONNECTOR_POLL_CONNECT | DRM_CONNECTOR_POLL_DISCONNECT; > + > + drm_connector_attach_encoder(connector, encoder); > + > + return 0; > +} -- -- Thomas Zimmermann Graphics Driver Developer SUSE Software Solutions Germany GmbH Frankenstrasse 146, 90461 Nuernberg, Germany GF: Ivo Totev, Andrew Myers, Andrew McDonald, Boudien Moerman HRB 36809 (AG Nuernberg) ^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH v4 0/1] [DRIVER] gpu: drm: add support for Yhgc ZX1000 soc chipset 2025-09-11 7:25 ` Thomas Zimmermann @ 2025-09-24 6:49 ` Chu Guangqing 2025-09-24 6:49 ` [PATCH v4 1/1] " Chu Guangqing 2025-09-25 4:04 ` [PATCH v4 " Dmitry Baryshkov 0 siblings, 2 replies; 22+ messages in thread From: Chu Guangqing @ 2025-09-24 6:49 UTC (permalink / raw) To: tzimmermann, maarten.lankhorst, mripard, airlied, simona, dmitry.baryshkov Cc: linux-kernel, dri-devel, Chu Guangqing Sorry, Thomas. The changes have been made this time. >Hi > >Am 10.09.25 um 04:23 schrieb Chu Guangqing: >> + select DRM_VRAM_HELPER >> + select DRM_TTM_HELPER > >I told you twice that VRAM helpers are obsolete and what to use instead. > It has been modified. >> + >> +struct yhgch_vdac { >> + struct drm_connector base; >> + struct i2c_adapter adapter; >> + struct i2c_algo_bit_data bit_data; >> +}; > >I've asked you several times whether to adopt the coding style in >ast/mgag200 for the DDC. It has been modified. > >No only that you not respond to to any of my reviews, you keep on submitting the same code again and again. Linux kernel development does not work like that. > >NAK on this driver until you get your act together. > >Best regards >Thomas > to Dmitry: 1. use plane_state->dst instead of crtc_h/w/x/y. 2. delete duplicate framebuffer's atomic_check. 3. use FIELD_PREP() directly. 4. use dev->mode_config. 5. delete unnecessary drm_atomic_helper_shutdown call 6. add AUTHOR 7. using .enable instead Chu Guangqing (1): [DRIVER] gpu: drm: add support for Yhgc ZX1000 soc chipset MAINTAINERS | 5 + drivers/gpu/drm/Kconfig | 2 + drivers/gpu/drm/Makefile | 1 + drivers/gpu/drm/yhgch/yhgch-drm/Kconfig | 11 + drivers/gpu/drm/yhgch/yhgch-drm/Makefile | 4 + .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_de.c | 423 ++++++++++++++++++ .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.c | 310 +++++++++++++ .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.h | 51 +++ .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_i2c.c | 114 +++++ .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_regs.h | 208 +++++++++ .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_vdac.c | 123 +++++ 11 files changed, 1252 insertions(+) create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/Kconfig create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/Makefile create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_de.c create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.c create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.h create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_i2c.c create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_regs.h create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_vdac.c -- 2.43.5 ^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH v4 1/1] [DRIVER] gpu: drm: add support for Yhgc ZX1000 soc chipset 2025-09-24 6:49 ` [PATCH v4 0/1] " Chu Guangqing @ 2025-09-24 6:49 ` Chu Guangqing 2025-09-25 4:15 ` Dmitry Baryshkov 2025-09-25 4:04 ` [PATCH v4 " Dmitry Baryshkov 1 sibling, 1 reply; 22+ messages in thread From: Chu Guangqing @ 2025-09-24 6:49 UTC (permalink / raw) To: tzimmermann, maarten.lankhorst, mripard, airlied, simona, dmitry.baryshkov Cc: linux-kernel, dri-devel, Chu Guangqing add support for Yhgc BMC soc chipset Signed-off-by: Chu Guangqing <chuguangqing@inspur.com> --- MAINTAINERS | 5 + drivers/gpu/drm/Kconfig | 2 + drivers/gpu/drm/Makefile | 1 + drivers/gpu/drm/yhgch/yhgch-drm/Kconfig | 11 + drivers/gpu/drm/yhgch/yhgch-drm/Makefile | 4 + .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_de.c | 423 ++++++++++++++++++ .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.c | 310 +++++++++++++ .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.h | 51 +++ .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_i2c.c | 114 +++++ .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_regs.h | 208 +++++++++ .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_vdac.c | 123 +++++ 11 files changed, 1252 insertions(+) create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/Kconfig create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/Makefile create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_de.c create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.c create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.h create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_i2c.c create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_regs.h create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_vdac.c diff --git a/MAINTAINERS b/MAINTAINERS index 10614ca41ed0..c79d9361fa81 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -27744,6 +27744,11 @@ S: Maintained F: Documentation/input/devices/yealink.rst F: drivers/input/misc/yealink.* +YHGC DRM DRIVER +M: chuguangqing <chuguangqing@inspur.com> +S: Maintained +F: drivers/gpu/drm/yhgch + Z8530 DRIVER FOR AX.25 M: Joerg Reuter <jreuter@yaina.de> L: linux-hams@vger.kernel.org diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index f7ea8e895c0c..fc204f1eb059 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -396,6 +396,8 @@ source "drivers/gpu/drm/sprd/Kconfig" source "drivers/gpu/drm/imagination/Kconfig" +source "drivers/gpu/drm/yhgch/yhgch-drm/Kconfig" + config DRM_HYPERV tristate "DRM Support for Hyper-V synthetic video device" depends on DRM && PCI && HYPERV diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile index 4dafbdc8f86a..1b4e7149727d 100644 --- a/drivers/gpu/drm/Makefile +++ b/drivers/gpu/drm/Makefile @@ -231,6 +231,7 @@ obj-y += solomon/ obj-$(CONFIG_DRM_SPRD) += sprd/ obj-$(CONFIG_DRM_LOONGSON) += loongson/ obj-$(CONFIG_DRM_POWERVR) += imagination/ +obj-$(CONFIG_DRM_YHGCH) += yhgch/yhgch-drm/ # Ensure drm headers are self-contained and pass kernel-doc hdrtest-files := \ diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/Kconfig b/drivers/gpu/drm/yhgch/yhgch-drm/Kconfig new file mode 100644 index 000000000000..695d29409444 --- /dev/null +++ b/drivers/gpu/drm/yhgch/yhgch-drm/Kconfig @@ -0,0 +1,11 @@ +config DRM_YHGCH + tristate "DRM Support for Yhgch BMC" + depends on DRM && PCI && MMU + select DRM_CLIENT_SELECTION + select DRM_KMS_HELPER + select DRM_GEM_SHMEM_HELPER + help + Choose this option if you have a Yhgch soc chipset. + If M is selected the module will be called yhgch-drm. + IF Y is selected the module will be built into the kernel. + IF N is selected the module will be excluded from the kernel. diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/Makefile b/drivers/gpu/drm/yhgch/yhgch-drm/Makefile new file mode 100644 index 000000000000..30de2fd27f18 --- /dev/null +++ b/drivers/gpu/drm/yhgch/yhgch-drm/Makefile @@ -0,0 +1,4 @@ +yhgch-drm-y := yhgch_drm_drv.o yhgch_drm_de.o yhgch_drm_vdac.o yhgch_drm_i2c.o + +obj-$(CONFIG_DRM_YHGCH) += yhgch-drm.o + diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_de.c b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_de.c new file mode 100644 index 000000000000..6450148e5c7c --- /dev/null +++ b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_de.c @@ -0,0 +1,423 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include <linux/delay.h> +#include <drm/drm_atomic.h> +#include <drm/drm_gem_atomic_helper.h> +#include <drm/drm_atomic_helper.h> +#include <drm/drm_gem_shmem_helper.h> +#include <drm/drm_format_helper.h> +#include <drm/drm_damage_helper.h> +#include <drm/drm_fourcc.h> + +#include <drm/drm_vblank.h> + +#include "yhgch_drm_drv.h" +#include "yhgch_drm_regs.h" + +struct yhgch_dislay_pll_config { + u64 hdisplay; + u64 vdisplay; + u32 pll1_config_value; + u32 pll2_config_value; +}; + +static const struct yhgch_dislay_pll_config yhgch_pll_table[] = { + { 640, 480, CRT_PLL1_NS_25MHZ, CRT_PLL2_NS_25MHZ }, + { 800, 600, CRT_PLL1_NS_40MHZ, CRT_PLL2_NS_40MHZ }, + { 1024, 768, CRT_PLL1_NS_65MHZ, CRT_PLL2_NS_65MHZ }, + { 1280, 1024, CRT_PLL1_NS_108MHZ, CRT_PLL2_NS_108MHZ }, + { 1920, 1080, CRT_PLL1_NS_148MHZ, CRT_PLL2_NS_148MHZ }, +}; + +static int yhgch_plane_atomic_check(struct drm_plane *plane, + struct drm_atomic_state *state) +{ + struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state, + plane); + struct drm_framebuffer *fb = new_plane_state->fb; + struct drm_crtc_state *new_crtc_state = NULL; + int ret; + + if (!fb) + return 0; + + if (new_plane_state->crtc) + new_crtc_state = drm_atomic_get_new_crtc_state(state, new_plane_state->crtc); + + ret = drm_atomic_helper_check_plane_state(new_plane_state, new_crtc_state, + DRM_PLANE_NO_SCALING, + DRM_PLANE_NO_SCALING, + false, true); + if (ret) + return ret; + else if (!new_plane_state->visible) + return 0; + + if (new_plane_state->dst.x2 > + new_crtc_state->adjusted_mode.hdisplay || + new_plane_state->dst.y2 > + new_crtc_state->adjusted_mode.vdisplay) { + drm_dbg_atomic(plane->dev, "visible portion of plane is invalid\n"); + return -EINVAL; + } + + return 0; +} + +static void yhgch_handle_damage(void *addr_base, struct iosys_map *src, + struct drm_framebuffer *fb, + struct drm_rect *clip) +{ + struct iosys_map dst; + + iosys_map_set_vaddr_iomem(&dst, addr_base); + iosys_map_incr(&dst, drm_fb_clip_offset(fb->pitches[0], fb->format, clip)); + drm_fb_memcpy(&dst, fb->pitches, src, fb, clip); +} + +static void yhgch_plane_atomic_update(struct drm_plane *plane, + struct drm_atomic_state *state) +{ + struct drm_plane_state *plane_state = drm_atomic_get_new_plane_state(state, plane); + struct drm_framebuffer *fb = plane_state->fb; + struct drm_plane_state *old_plane_state = drm_atomic_get_old_plane_state(state, plane); + struct drm_shadow_plane_state *shadow_plane_state = to_drm_shadow_plane_state(plane_state); + struct yhgch_drm_private *priv = to_yhgch_drm_private(plane->dev); + struct drm_atomic_helper_damage_iter iter; + struct drm_rect damage; + u32 reg; + s64 gpu_addr = 0; + u32 line_l; + + if (!plane_state->crtc || !plane_state->fb) + return; + + if (!plane_state->visible) + return; + + drm_atomic_helper_damage_iter_init(&iter, old_plane_state, plane_state); + drm_atomic_for_each_plane_damage(&iter, &damage) { + yhgch_handle_damage(priv->vram_base, shadow_plane_state->data, fb, &damage); + } + + fb->pitches[0] = (fb->pitches[0] + 15) & ~15; + + writel(gpu_addr, priv->mmio + YHGCH_CRT_FB_ADDRESS); + + reg = fb->width * (fb->format->cpp[0]); + + line_l = fb->pitches[0]; + writel(FIELD_PREP(YHGCH_CRT_FB_WIDTH_WIDTH_MASK, reg) | + FIELD_PREP(YHGCH_CRT_FB_WIDTH_OFFS_MASK, line_l), + priv->mmio + YHGCH_CRT_FB_WIDTH); + + /* SET PIXEL FORMAT */ + reg = readl(priv->mmio + YHGCH_CRT_DISP_CTL); + reg &= ~YHGCH_CRT_DISP_CTL_FORMAT_MASK; + reg |= FIELD_PREP(YHGCH_CRT_DISP_CTL_FORMAT_MASK, + fb->format->cpp[0] * 8 / 16); + writel(reg, priv->mmio + YHGCH_CRT_DISP_CTL); +} + +static const u32 channel_formats1[] = { + DRM_FORMAT_RGB565, DRM_FORMAT_RGB888, + DRM_FORMAT_XRGB8888, +}; + +static struct drm_plane_funcs yhgch_plane_funcs = { + .update_plane = drm_atomic_helper_update_plane, + .disable_plane = drm_atomic_helper_disable_plane, + .destroy = drm_plane_cleanup, + .reset = drm_atomic_helper_plane_reset, + .atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_plane_destroy_state, + DRM_GEM_SHADOW_PLANE_FUNCS, +}; + +static const struct drm_plane_helper_funcs yhgch_plane_helper_funcs = { + DRM_GEM_SHADOW_PLANE_HELPER_FUNCS, + .atomic_check = yhgch_plane_atomic_check, + .atomic_update = yhgch_plane_atomic_update, +}; + +static void yhgch_crtc_dpms(struct drm_crtc *crtc, u32 dpms) +{ + struct yhgch_drm_private *priv = to_yhgch_drm_private(crtc->dev); + u32 reg; + + reg = readl(priv->mmio + YHGCH_CRT_DISP_CTL); + reg &= ~YHGCH_CRT_DISP_CTL_DPMS_MASK; + reg |= FIELD_PREP(YHGCH_CRT_DISP_CTL_DPMS_MASK, dpms); + reg &= ~YHGCH_CRT_DISP_CTL_TIMING_MASK; + if (dpms == YHGCH_CRT_DPMS_ON) + reg |= YHGCH_CRT_DISP_CTL_TIMING(1); + writel(reg, priv->mmio + YHGCH_CRT_DISP_CTL); +} + +static void yhgch_crtc_atomic_enable(struct drm_crtc *crtc, + struct drm_atomic_state *old_state) +{ + u32 reg; + struct yhgch_drm_private *priv = to_yhgch_drm_private(crtc->dev); + + yhgch_set_power_mode(priv, YHGCH_PW_MODE_CTL_MODE_MODE0); + + /* Enable display power gate & LOCALMEM power gate */ + reg = readl(priv->mmio + YHGCH_CURRENT_GATE); + reg &= ~YHGCH_CURR_GATE_LOCALMEM_MASK; + reg &= ~YHGCH_CURR_GATE_DISPLAY_MASK; + reg |= YHGCH_CURR_GATE_LOCALMEM(1); + reg |= YHGCH_CURR_GATE_DISPLAY(1); + yhgch_set_current_gate(priv, reg); + yhgch_crtc_dpms(crtc, YHGCH_CRT_DPMS_ON); +} + +static void yhgch_crtc_atomic_disable(struct drm_crtc *crtc, + struct drm_atomic_state *old_state) +{ + u32 reg; + struct yhgch_drm_private *priv = to_yhgch_drm_private(crtc->dev); + + yhgch_crtc_dpms(crtc, YHGCH_CRT_DPMS_OFF); + + yhgch_set_power_mode(priv, YHGCH_PW_MODE_CTL_MODE_SLEEP); + + /* Enable display power gate & LOCALMEM power gate */ + reg = readl(priv->mmio + YHGCH_CURRENT_GATE); + reg &= ~YHGCH_CURR_GATE_LOCALMEM_MASK; + reg &= ~YHGCH_CURR_GATE_DISPLAY_MASK; + reg |= YHGCH_CURR_GATE_LOCALMEM(0); + reg |= YHGCH_CURR_GATE_DISPLAY(0); + yhgch_set_current_gate(priv, reg); +} + +static enum drm_mode_status +yhgch_crtc_mode_valid(struct drm_crtc *crtc, + const struct drm_display_mode *mode) +{ + size_t i = 0; + int vrefresh = drm_mode_vrefresh(mode); + + if (vrefresh < 59 || vrefresh > 61) + return MODE_NOCLOCK; + + for (i = 0; i < ARRAY_SIZE(yhgch_pll_table); i++) { + if (yhgch_pll_table[i].hdisplay == mode->hdisplay && + yhgch_pll_table[i].vdisplay == mode->vdisplay) + return MODE_OK; + } + + return MODE_BAD; +} + +static void set_vclock_yhgch(struct drm_device *dev, u64 pll) +{ + u32 val; + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); + + val = readl(priv->mmio + CRT_PLL1_NS); + val &= ~(CRT_PLL1_NS_OUTER_BYPASS(1)); + writel(val, priv->mmio + CRT_PLL1_NS); + + val = CRT_PLL1_NS_INTER_BYPASS(1) | CRT_PLL1_NS_POWERON(1); + writel(val, priv->mmio + CRT_PLL1_NS); + + writel(pll, priv->mmio + CRT_PLL1_NS); + + usleep_range(1000, 2000); + + val = pll & ~(CRT_PLL1_NS_POWERON(1)); + writel(val, priv->mmio + CRT_PLL1_NS); + + usleep_range(1000, 2000); + + val &= ~(CRT_PLL1_NS_INTER_BYPASS(1)); + writel(val, priv->mmio + CRT_PLL1_NS); + + usleep_range(1000, 2000); + + val |= CRT_PLL1_NS_OUTER_BYPASS(1); + writel(val, priv->mmio + CRT_PLL1_NS); +} + +static void get_pll_config(u64 x, u64 y, u32 *pll1, u32 *pll2) +{ + size_t i; + size_t count = ARRAY_SIZE(yhgch_pll_table); + + for (i = 0; i < count; i++) { + if (yhgch_pll_table[i].hdisplay == x && + yhgch_pll_table[i].vdisplay == y) { + *pll1 = yhgch_pll_table[i].pll1_config_value; + *pll2 = yhgch_pll_table[i].pll2_config_value; + return; + } + } + + /* if found none, we use default value */ + *pll1 = CRT_PLL1_NS_25MHZ; + *pll2 = CRT_PLL2_NS_25MHZ; +} + +/* + * This function takes care the extra registers and bit fields required to + * setup a mode in board. + * Explanation about Display Control register: + * FPGA only supports 7 predefined pixel clocks, and clock select is + * in bit 4:0 of new register 0x802a8. + */ +static u32 display_ctrl_adjust(struct drm_device *dev, + struct drm_display_mode *mode, + u32 ctrl) +{ + u64 w, h; + u32 pll1; /* bit[31:0] of PLL */ + u32 pll2; /* bit[63:32] of PLL */ + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); + + w = mode->hdisplay; + h = mode->vdisplay; + + get_pll_config(w, h, &pll1, &pll2); + writel(pll2, priv->mmio + CRT_PLL2_NS); + set_vclock_yhgch(dev, pll1); + + /* + * yhgch has to set up the top-left and bottom-right + * registers as well. + * Note that normal chip only use those two register for + * auto-centering mode. + */ + writel(FIELD_PREP(YHGCH_CRT_AUTO_CENTERING_TL_TOP_MASK, 0) | + FIELD_PREP(YHGCH_CRT_AUTO_CENTERING_TL_LEFT_MASK, 0), + priv->mmio + YHGCH_CRT_AUTO_CENTERING_TL); + + writel(FIELD_PREP(YHGCH_CRT_AUTO_CENTERING_BR_BOTTOM_MASK, h - 1) | + FIELD_PREP(YHGCH_CRT_AUTO_CENTERING_BR_RIGHT_MASK, w - 1), + priv->mmio + YHGCH_CRT_AUTO_CENTERING_BR); + + /* + * Assume common fields in ctrl have been properly set before + * calling this function. + * This function only sets the extra fields in ctrl. + */ + + /* Set bit 25 of display controller: Select CRT or VGA clock */ + ctrl &= ~YHGCH_CRT_DISP_CTL_CRTSELECT_MASK; + ctrl &= ~YHGCH_CRT_DISP_CTL_CLOCK_PHASE_MASK; + + ctrl |= YHGCH_CRT_DISP_CTL_CRTSELECT(YHGCH_CRTSELECT_CRT); + + /* clock_phase_polarity is 0 */ + ctrl |= YHGCH_CRT_DISP_CTL_CLOCK_PHASE(0); + ctrl |= FIELD_PREP(YHGCH_CRT_DISP_CTL_FORMAT_MASK, 2); + + writel(ctrl, priv->mmio + YHGCH_CRT_DISP_CTL); + + return ctrl; +} + +static void yhgch_crtc_mode_set_nofb(struct drm_crtc *crtc) +{ + u32 val; + struct drm_display_mode *mode = &crtc->state->mode; + struct drm_device *dev = crtc->dev; + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); + u32 width = mode->hsync_end - mode->hsync_start; + u32 height = mode->vsync_end - mode->vsync_start; + + //writel(format_pll_reg(), priv->mmio + YHGCH_CRT_PLL_CTRL); + writel(FIELD_PREP(YHGCH_CRT_HORZ_TOTAL_TOTAL_MASK, mode->htotal - 1) | + FIELD_PREP(YHGCH_CRT_HORZ_TOTAL_DISP_END_MASK, mode->hdisplay - 1), + priv->mmio + YHGCH_CRT_HORZ_TOTAL); + + writel(FIELD_PREP(YHGCH_CRT_HORZ_SYNC_WIDTH_MASK, width) | + FIELD_PREP(YHGCH_CRT_HORZ_SYNC_START_MASK, mode->hsync_start - 1), + priv->mmio + YHGCH_CRT_HORZ_SYNC); + + writel(FIELD_PREP(YHGCH_CRT_VERT_TOTAL_TOTAL_MASK, mode->vtotal - 1) | + FIELD_PREP(YHGCH_CRT_VERT_TOTAL_DISP_END_MASK, mode->vdisplay - 1), + priv->mmio + YHGCH_CRT_VERT_TOTAL); + + writel(FIELD_PREP(YHGCH_CRT_VERT_SYNC_HEIGHT_MASK, height) | + FIELD_PREP(YHGCH_CRT_VERT_SYNC_START_MASK, mode->vsync_start - 1), + priv->mmio + YHGCH_CRT_VERT_SYNC); + + val = FIELD_PREP(YHGCH_CRT_DISP_CTL_VSYNC_PHASE_MASK, 0); + val |= FIELD_PREP(YHGCH_CRT_DISP_CTL_HSYNC_PHASE_MASK, 0); + val |= YHGCH_CRT_DISP_CTL_TIMING(1); + val |= YHGCH_CRT_DISP_CTL_PLANE(1); + + display_ctrl_adjust(dev, mode, val); +} + +static void yhgch_crtc_atomic_begin(struct drm_crtc *crtc, + struct drm_atomic_state *old_state) +{ + u32 reg; + struct drm_device *dev = crtc->dev; + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); + + yhgch_set_power_mode(priv, YHGCH_PW_MODE_CTL_MODE_MODE0); + + /* Enable display power gate & LOCALMEM power gate */ + reg = readl(priv->mmio + YHGCH_CURRENT_GATE); + reg &= ~YHGCH_CURR_GATE_DISPLAY_MASK; + reg &= ~YHGCH_CURR_GATE_LOCALMEM_MASK; + reg |= YHGCH_CURR_GATE_DISPLAY(1); + reg |= YHGCH_CURR_GATE_LOCALMEM(1); + yhgch_set_current_gate(priv, reg); + + /* We can add more initialization as needed. */ +} + +static const struct drm_crtc_funcs yhgch_crtc_funcs = { + .page_flip = drm_atomic_helper_page_flip, + .set_config = drm_atomic_helper_set_config, + .destroy = drm_crtc_cleanup, + .reset = drm_atomic_helper_crtc_reset, + .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state, + +}; + +static const struct drm_crtc_helper_funcs yhgch_crtc_helper_funcs = { + .mode_set_nofb = yhgch_crtc_mode_set_nofb, + .atomic_begin = yhgch_crtc_atomic_begin, + .atomic_enable = yhgch_crtc_atomic_enable, + .atomic_disable = yhgch_crtc_atomic_disable, + .mode_valid = yhgch_crtc_mode_valid, +}; + +int yhgch_de_init(struct yhgch_drm_private *priv) +{ + struct drm_device *dev = &priv->dev; + struct drm_crtc *crtc = &priv->crtc; + struct drm_plane *plane = &priv->primary_plane; + int ret; + + ret = drm_universal_plane_init(dev, plane, 1, &yhgch_plane_funcs, + channel_formats1, + ARRAY_SIZE(channel_formats1), + NULL, + DRM_PLANE_TYPE_PRIMARY, + NULL); + if (ret) { + drm_err(dev, "failed to init plane: %d\n", ret); + return ret; + } + + drm_plane_helper_add(plane, &yhgch_plane_helper_funcs); + drm_plane_enable_fb_damage_clips(plane); + + ret = drm_crtc_init_with_planes(dev, crtc, plane, + NULL, &yhgch_crtc_funcs, NULL); + if (ret) { + drm_err(dev, "failed to init crtc: %d\n", ret); + return ret; + } + + drm_crtc_helper_add(crtc, &yhgch_crtc_helper_funcs); + + return 0; +} diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.c b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.c new file mode 100644 index 000000000000..a68120362ee6 --- /dev/null +++ b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.c @@ -0,0 +1,310 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/bitfield.h> + +#include <linux/aperture.h> +#include <drm/clients/drm_client_setup.h> + +#include <drm/drm_atomic_helper.h> +#include <drm/drm_drv.h> +#include <drm/drm_fbdev_ttm.h> + +#include <drm/drm_gem_framebuffer_helper.h> +#include <drm/drm_fbdev_shmem.h> +#include <drm/drm_gem_shmem_helper.h> +#include <drm/drm_managed.h> +#include <drm/drm_module.h> +#include <drm/drm_vblank.h> + +#include <drm/drm_probe_helper.h> + +#include "yhgch_drm_drv.h" +#include "yhgch_drm_regs.h" + +#define MEM_SIZE_RESERVE4KVM 0x200000 + +DEFINE_DRM_GEM_FOPS(yhgch_fops); + +int yhgch_dumb_create(struct drm_file *file, struct drm_device *dev, + struct drm_mode_create_dumb *args) +{ + args->width = ALIGN(args->width, 8); + return drm_gem_shmem_dumb_create(file, dev, args); +} + +static struct drm_driver yhgch_driver = { + .driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC, + .fops = &yhgch_fops, + .name = "yhgch", + .desc = "yhgch drm driver", + .major = 3, + .minor = 1, + .dumb_create = yhgch_dumb_create, + DRM_FBDEV_SHMEM_DRIVER_OPS, +}; + +static int __maybe_unused yhgch_pm_suspend(struct device *dev) +{ + struct drm_device *drm_dev = dev_get_drvdata(dev); + + return drm_mode_config_helper_suspend(drm_dev); +} + +static int __maybe_unused yhgch_pm_resume(struct device *dev) +{ + struct drm_device *drm_dev = dev_get_drvdata(dev); + + return drm_mode_config_helper_resume(drm_dev); +} + +static const struct dev_pm_ops yhgch_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(yhgch_pm_suspend, + yhgch_pm_resume) +}; + +static const struct drm_mode_config_funcs yhgch_mode_funcs = { + .atomic_check = drm_atomic_helper_check, + .atomic_commit = drm_atomic_helper_commit, + .fb_create = drm_gem_fb_create_with_dirty, +}; + +static int yhgch_kms_init(struct yhgch_drm_private *priv) +{ + struct drm_device *dev = &priv->dev; + int ret; + + ret = drmm_mode_config_init(dev); + if (ret) + return ret; + + dev->mode_config.min_width = 0; + dev->mode_config.min_height = 0; + dev->mode_config.max_width = 1920; + dev->mode_config.max_height = 1200; + dev->mode_config.preferred_depth = 24; + dev->mode_config.prefer_shadow = 1; + dev->mode_config.funcs = &yhgch_mode_funcs; + + ret = yhgch_de_init(priv); + if (ret) { + drm_err(dev, "failed to init de: %d\n", ret); + return ret; + } + + ret = yhgch_vdac_init(priv); + if (ret) { + drm_err(dev, "failed to init vdac: %d\n", ret); + return ret; + } + drm_kms_helper_poll_init(dev); + + return 0; +} + +/* + * It can operate in one of three modes: 0, 1 or Sleep. + */ +void yhgch_set_power_mode(struct yhgch_drm_private *priv, u32 power_mode) +{ + unsigned int control_value = 0; + void __iomem *mmio = priv->mmio; + u32 input = 1; + + if (power_mode > YHGCH_PW_MODE_CTL_MODE_SLEEP) + return; + + if (power_mode == YHGCH_PW_MODE_CTL_MODE_SLEEP) + input = 0; + + control_value = readl(mmio + YHGCH_POWER_MODE_CTRL); + control_value &= ~(YHGCH_PW_MODE_CTL_MODE_MASK | + YHGCH_PW_MODE_CTL_OSC_INPUT_MASK); + control_value |= FIELD_PREP(YHGCH_PW_MODE_CTL_MODE_MASK, power_mode); + control_value |= FIELD_PREP(YHGCH_PW_MODE_CTL_OSC_INPUT_MASK, input); + writel(control_value, mmio + YHGCH_POWER_MODE_CTRL); +} + +void yhgch_set_current_gate(struct yhgch_drm_private *priv, unsigned int gate) +{ + u32 gate_reg; + u32 mode; + void __iomem *mmio = priv->mmio; + + /* Get current power mode. */ + mode = (readl(mmio + YHGCH_POWER_MODE_CTRL) & + YHGCH_PW_MODE_CTL_MODE_MASK) >> YHGCH_PW_MODE_CTL_MODE_SHIFT; + + switch (mode) { + case YHGCH_PW_MODE_CTL_MODE_MODE0: + gate_reg = YHGCH_MODE0_GATE; + break; + + case YHGCH_PW_MODE_CTL_MODE_MODE1: + gate_reg = YHGCH_MODE1_GATE; + break; + + default: + gate_reg = YHGCH_MODE0_GATE; + break; + } + writel(gate, mmio + gate_reg); +} + +static void yhgch_hw_config(struct yhgch_drm_private *priv) +{ + u32 reg; + + /* On hardware reset, power mode 0 is default. */ + yhgch_set_power_mode(priv, YHGCH_PW_MODE_CTL_MODE_MODE0); + + /* Enable display power gate & LOCALMEM power gate */ + reg = readl(priv->mmio + YHGCH_CURRENT_GATE); + reg &= ~YHGCH_CURR_GATE_DISPLAY_MASK; + reg &= ~YHGCH_CURR_GATE_LOCALMEM_MASK; + reg |= YHGCH_CURR_GATE_DISPLAY(1); + reg |= YHGCH_CURR_GATE_LOCALMEM(1); + + yhgch_set_current_gate(priv, reg); + + /* + * Reset the memory controller. If the memory controller + * is not reset in chip,the system might hang when sw accesses + * the memory.The memory should be resetted after + * changing the MXCLK. + */ + reg = readl(priv->mmio + YHGCH_MISC_CTRL); + reg &= ~YHGCH_MSCCTL_LOCALMEM_RESET_MASK; + reg |= YHGCH_MSCCTL_LOCALMEM_RESET(0); + writel(reg, priv->mmio + YHGCH_MISC_CTRL); + + reg &= ~YHGCH_MSCCTL_LOCALMEM_RESET_MASK; + reg |= YHGCH_MSCCTL_LOCALMEM_RESET(1); + + writel(reg, priv->mmio + YHGCH_MISC_CTRL); +} + +static int yhgch_hw_map(struct yhgch_drm_private *priv) +{ + struct drm_device *dev = &priv->dev; + struct pci_dev *pdev = to_pci_dev(dev->dev); + resource_size_t ioaddr, iosize; + + ioaddr = pci_resource_start(pdev, 1); + iosize = pci_resource_len(pdev, 1); + priv->mmio = devm_ioremap(dev->dev, ioaddr, iosize); + if (!priv->mmio) { + drm_err(dev, "Cannot map mmio region\n"); + return -ENOMEM; + } + + ioaddr = pci_resource_start(pdev, 0); + iosize = pci_resource_len(pdev, 0); + priv->vram_base = devm_ioremap_wc(dev->dev, ioaddr, iosize); + if (!priv->vram_base) { + drm_err(dev, "Cannot map vram region\n"); + return -ENOMEM; + } + return 0; +} + +static int yhgch_hw_init(struct yhgch_drm_private *priv) +{ + int ret; + + ret = yhgch_hw_map(priv); + if (ret) + return ret; + yhgch_hw_config(priv); + return 0; +} + +static int yhgch_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct yhgch_drm_private *priv; + struct drm_device *dev; + int ret; + + ret = aperture_remove_conflicting_pci_devices(pdev, yhgch_driver.name); + + if (ret) + return ret; + + priv = devm_drm_dev_alloc(&pdev->dev, &yhgch_driver, + struct yhgch_drm_private, dev); + + if (IS_ERR(priv)) + return PTR_ERR(priv); + + dev = &priv->dev; + pci_set_drvdata(pdev, dev); + + ret = pcim_enable_device(pdev); + if (ret) { + drm_err(dev, "failed to enable pci device: %d\n", ret); + goto err_return; + } + + ret = yhgch_hw_init(priv); + if (ret) + goto err_return; + + ret = yhgch_kms_init(priv); + if (ret) + goto err_return; + + ret = pci_enable_msi(pdev); + if (ret) + drm_warn(dev, "enabling MSI failed: %d\n", ret); + /* reset all the states of crtc/plane/encoder/connector */ + drm_mode_config_reset(dev); + + ret = drm_dev_register(dev, 0); + if (ret) { + drm_err(dev, "failed to register drv for userspace access: %d\n", + ret); + goto err_return; + } + drm_client_setup(dev, NULL); + + return 0; + +err_return: + return ret; +} + +static void yhgch_pci_remove(struct pci_dev *pdev) +{ + struct drm_device *dev = pci_get_drvdata(pdev); + + drm_dev_unregister(dev); + drm_dev_put(dev); +} + +static void yhgch_pci_shutdown(struct pci_dev *pdev) +{ + drm_atomic_helper_shutdown(pci_get_drvdata(pdev)); +} + +static struct pci_device_id yhgch_pci_table[] = { + { 0x1bd4, 0x0750, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { 0, } +}; + +static struct pci_driver yhgch_pci_driver = { + .name = "yhgch-drm", + .id_table = yhgch_pci_table, + .probe = yhgch_pci_probe, + .remove = yhgch_pci_remove, + .shutdown = yhgch_pci_shutdown, + .driver.pm = &yhgch_pm_ops, +}; + +drm_module_pci_driver(yhgch_pci_driver); + +MODULE_DEVICE_TABLE(pci, yhgch_pci_table); +MODULE_AUTHOR("Inspur"); +MODULE_DESCRIPTION("DRM Driver for YhgchBMC"); +MODULE_LICENSE("GPL"); +MODULE_VERSION("3.1"); diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.h b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.h new file mode 100644 index 000000000000..1b8b1e5b0a43 --- /dev/null +++ b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.h @@ -0,0 +1,51 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef YHGCH_DRM_DRV_H +#define YHGCH_DRM_DRV_H + +#include <linux/gpio/consumer.h> +#include <linux/i2c-algo-bit.h> +#include <linux/i2c.h> +#include <linux/version.h> +#include <linux/bitfield.h> +#include <drm/drm_framebuffer.h> +#include <drm/drm_encoder.h> + +struct yhgch_ddc { + struct yhgch_drm_private *priv; + struct i2c_adapter adapter; + struct i2c_algo_bit_data bit_data; +}; + +struct yhgch_drm_private { + /* hw */ + void __iomem *mmio; + void __iomem *vram_base; + + /* drm */ + struct drm_device dev; + struct drm_plane primary_plane; + struct drm_crtc crtc; + struct drm_encoder encoder; + struct drm_connector connector; +}; + +static inline struct yhgch_drm_private *to_yhgch_drm_private(struct drm_device *dev) +{ + return container_of(dev, struct yhgch_drm_private, dev); +} + +void yhgch_set_power_mode(struct yhgch_drm_private *priv, + u32 power_mode); +void yhgch_set_current_gate(struct yhgch_drm_private *priv, + u32 gate); + +int yhgch_de_init(struct yhgch_drm_private *priv); +int yhgch_vdac_init(struct yhgch_drm_private *priv); +int yhgch_mm_init(struct yhgch_drm_private *yhgch); +struct i2c_adapter *yhgch_ddc_create(struct yhgch_drm_private *priv); + +int yhgch_dumb_create(struct drm_file *file, struct drm_device *dev, + struct drm_mode_create_dumb *args); + +#endif diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_i2c.c b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_i2c.c new file mode 100644 index 000000000000..7bbe9a0540d4 --- /dev/null +++ b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_i2c.c @@ -0,0 +1,114 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include <linux/delay.h> +#include <linux/pci.h> + +#include <drm/drm_atomic_helper.h> +#include <drm/drm_probe_helper.h> + +#include <drm/drm_managed.h> + +#include "yhgch_drm_drv.h" + +#define GPIO_DATA 0x0802A0 +#define GPIO_DATA_DIRECTION 0x0802A4 + +#define I2C_SCL_MASK BIT(0) +#define I2C_SDA_MASK BIT(1) + +static void yhgch_set_i2c_signal(void *data, u32 mask, int value) +{ + struct yhgch_ddc *ddc = data; + struct yhgch_drm_private *priv = ddc->priv; + u32 tmp_dir = readl(priv->mmio + GPIO_DATA_DIRECTION); + + if (value) { + tmp_dir &= ~mask; + writel(tmp_dir, priv->mmio + GPIO_DATA_DIRECTION); + } else { + u32 tmp_data = readl(priv->mmio + GPIO_DATA); + + tmp_data &= ~mask; + writel(tmp_data, priv->mmio + GPIO_DATA); + + tmp_dir |= mask; + writel(tmp_dir, priv->mmio + GPIO_DATA_DIRECTION); + } +} + +static int yhgch_get_i2c_signal(void *data, u32 mask) +{ + struct yhgch_ddc *ddc = data; + struct yhgch_drm_private *priv = ddc->priv; + u32 tmp_dir = readl(priv->mmio + GPIO_DATA_DIRECTION); + + if ((tmp_dir & mask) != mask) { + tmp_dir &= ~mask; + writel(tmp_dir, priv->mmio + GPIO_DATA_DIRECTION); + } + + return (readl(priv->mmio + GPIO_DATA) & mask) ? 1 : 0; +} + +static void yhgch_ddc_setsda(void *data, int state) +{ + yhgch_set_i2c_signal(data, I2C_SDA_MASK, state); +} + +static void yhgch_ddc_setscl(void *data, int state) +{ + yhgch_set_i2c_signal(data, I2C_SCL_MASK, state); +} + +static int yhgch_ddc_getsda(void *data) +{ + return yhgch_get_i2c_signal(data, I2C_SDA_MASK); +} + +static int yhgch_ddc_getscl(void *data) +{ + return yhgch_get_i2c_signal(data, I2C_SCL_MASK); +} + +static void yhgch_ddc_release(struct drm_device *dev, void *res) +{ + struct yhgch_ddc *ddc = res; + + i2c_del_adapter(&ddc->adapter); +} + +struct i2c_adapter *yhgch_ddc_create(struct yhgch_drm_private *priv) +{ + int ret = 0; + struct yhgch_ddc *ddc; + struct drm_device *dev = &priv->dev; + + ddc = drmm_kzalloc(dev, sizeof(struct yhgch_ddc), GFP_KERNEL); + if (!ddc) + return ERR_PTR(-ENOMEM); + + ddc->adapter.owner = THIS_MODULE; + ddc->priv = priv; + snprintf(ddc->adapter.name, I2C_NAME_SIZE, "INS i2c bit bus"); + ddc->adapter.dev.parent = priv->dev.dev; + i2c_set_adapdata(&ddc->adapter, ddc); + ddc->adapter.algo_data = &ddc->bit_data; + + ddc->bit_data.udelay = 20; + ddc->bit_data.timeout = usecs_to_jiffies(2000); + ddc->bit_data.data = ddc; + ddc->bit_data.setsda = yhgch_ddc_setsda; + ddc->bit_data.setscl = yhgch_ddc_setscl; + ddc->bit_data.getsda = yhgch_ddc_getsda; + ddc->bit_data.getscl = yhgch_ddc_getscl; + + ret = i2c_bit_add_bus(&ddc->adapter); + if (ret) + return ERR_PTR(ret); + + ret = drmm_add_action_or_reset(&priv->dev, yhgch_ddc_release, ddc); + if (ret) + return ERR_PTR(ret); + + return &ddc->adapter; +} diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_regs.h b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_regs.h new file mode 100644 index 000000000000..cecb6173a445 --- /dev/null +++ b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_regs.h @@ -0,0 +1,208 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef YHGCH_DRM_HW_H +#define YHGCH_DRM_HW_H + +/* register definition */ +#define YHGCH_MISC_CTRL 0x4 + +#define YHGCH_MSCCTL_LOCALMEM_RESET(x) ((x) << 6) +#define YHGCH_MSCCTL_LOCALMEM_RESET_MASK 0x40 + +#define YHGCH_CURRENT_GATE 0x000040 +#define YHGCH_CURR_GATE_DISPLAY(x) ((x) << 2) +#define YHGCH_CURR_GATE_DISPLAY_MASK 0x4 + +#define YHGCH_CURR_GATE_LOCALMEM(x) ((x) << 1) +#define YHGCH_CURR_GATE_LOCALMEM_MASK 0x2 + +#define YHGCH_MODE0_GATE 0x000044 +#define YHGCH_MODE1_GATE 0x000048 +#define YHGCH_POWER_MODE_CTRL 0x00004C + +#define YHGCH_PW_MODE_CTL_OSC_INPUT(x) ((x) << 3) +#define YHGCH_PW_MODE_CTL_OSC_INPUT_MASK 0x8 + +#define YHGCH_PW_MODE_CTL_MODE(x) ((x) << 0) +#define YHGCH_PW_MODE_CTL_MODE_MASK 0x03 +#define YHGCH_PW_MODE_CTL_MODE_SHIFT 0 + +#define YHGCH_PW_MODE_CTL_MODE_MODE0 0 +#define YHGCH_PW_MODE_CTL_MODE_MODE1 1 +#define YHGCH_PW_MODE_CTL_MODE_SLEEP 2 + +//#define YHGCH_CRT_PLL_CTRL 0x000060 + +#define YHGCH_PLL_CTRL_BYPASS(x) ((x) << 18) +#define YHGCH_PLL_CTRL_BYPASS_MASK 0x40000 + +#define YHGCH_PLL_CTRL_POWER(x) ((x) << 17) +#define YHGCH_PLL_CTRL_POWER_MASK 0x20000 + +#define YHGCH_PLL_CTRL_INPUT(x) ((x) << 16) +#define YHGCH_PLL_CTRL_INPUT_MASK 0x10000 + +#define YHGCH_PLL_CTRL_POD(x) ((x) << 14) +#define YHGCH_PLL_CTRL_POD_MASK 0xC000 + +#define YHGCH_PLL_CTRL_OD(x) ((x) << 12) +#define YHGCH_PLL_CTRL_OD_MASK 0x3000 + +#define YHGCH_PLL_CTRL_N(x) ((x) << 8) +#define YHGCH_PLL_CTRL_N_MASK 0xF00 + +#define YHGCH_PLL_CTRL_M(x) ((x) << 0) +#define YHGCH_PLL_CTRL_M_MASK 0xFF + +#define YHGCH_CRT_DISP_CTL 0x80200 + +#define YHGCH_CRT_DISP_CTL_DPMS(x) ((x) << 30) +#define YHGCH_CRT_DISP_CTL_DPMS_MASK 0xc0000000 + +#define YHGCH_CRT_DPMS_ON 0 +#define YHGCH_CRT_DPMS_OFF 3 + +#define YHGCH_CRT_DISP_CTL_CRTSELECT(x) ((x) << 25) +#define YHGCH_CRT_DISP_CTL_CRTSELECT_MASK 0x2000000 + +#define YHGCH_CRTSELECT_CRT 1 + +#define YHGCH_CRT_DISP_CTL_CLOCK_PHASE(x) ((x) << 14) +#define YHGCH_CRT_DISP_CTL_CLOCK_PHASE_MASK 0x4000 + +#define YHGCH_CRT_DISP_CTL_VSYNC_PHASE(x) ((x) << 13) +#define YHGCH_CRT_DISP_CTL_VSYNC_PHASE_MASK 0x2000 + +#define YHGCH_CRT_DISP_CTL_HSYNC_PHASE(x) ((x) << 12) +#define YHGCH_CRT_DISP_CTL_HSYNC_PHASE_MASK 0x1000 + +#define YHGCH_CRT_DISP_CTL_TIMING(x) ((x) << 8) +#define YHGCH_CRT_DISP_CTL_TIMING_MASK 0x100 + +#define YHGCH_CRT_DISP_CTL_PLANE(x) ((x) << 2) +#define YHGCH_CRT_DISP_CTL_PLANE_MASK 4 + +#define YHGCH_CRT_DISP_CTL_FORMAT(x) ((x) << 0) +#define YHGCH_CRT_DISP_CTL_FORMAT_MASK 0x03 + +#define YHGCH_CRT_FB_ADDRESS 0x080204 + +#define YHGCH_CRT_FB_WIDTH 0x080208 +#define YHGCH_CRT_FB_WIDTH_WIDTH(x) ((x) << 16) +#define YHGCH_CRT_FB_WIDTH_WIDTH_MASK 0x3FFF0000 +#define YHGCH_CRT_FB_WIDTH_OFFS(x) ((x) << 0) +#define YHGCH_CRT_FB_WIDTH_OFFS_MASK 0x3FFF + +#define YHGCH_CRT_HORZ_TOTAL 0x08020C +#define YHGCH_CRT_HORZ_TOTAL_TOTAL(x) ((x) << 16) +#define YHGCH_CRT_HORZ_TOTAL_TOTAL_MASK 0xFFF0000 + +#define YHGCH_CRT_HORZ_TOTAL_DISP_END(x) ((x) << 0) +#define YHGCH_CRT_HORZ_TOTAL_DISP_END_MASK 0xFFF + +#define YHGCH_CRT_HORZ_SYNC 0x080210 +#define YHGCH_CRT_HORZ_SYNC_WIDTH(x) ((x) << 16) +#define YHGCH_CRT_HORZ_SYNC_WIDTH_MASK 0xFF0000 + +#define YHGCH_CRT_HORZ_SYNC_START(x) ((x) << 0) +#define YHGCH_CRT_HORZ_SYNC_START_MASK 0xFFF + +#define YHGCH_CRT_VERT_TOTAL 0x080214 +#define YHGCH_CRT_VERT_TOTAL_TOTAL(x) ((x) << 16) +#define YHGCH_CRT_VERT_TOTAL_TOTAL_MASK 0x7FFF0000 + +#define YHGCH_CRT_VERT_TOTAL_DISP_END(x) ((x) << 0) +#define YHGCH_CRT_VERT_TOTAL_DISP_END_MASK 0x7FF + +#define YHGCH_CRT_VERT_SYNC 0x080218 +#define YHGCH_CRT_VERT_SYNC_HEIGHT(x) ((x) << 16) +#define YHGCH_CRT_VERT_SYNC_HEIGHT_MASK 0x3F0000 + +#define YHGCH_CRT_VERT_SYNC_START(x) ((x) << 0) +#define YHGCH_CRT_VERT_SYNC_START_MASK 0x7FF + +/* Hardware Cursor */ +#define YHGCH_HWC_ADDRESS 0x080230 +#define YHGCH_HWC_ADDRESS_ENABLE(x) ((x) << 31) +#define YHGCH_HWC_ADDRESS_ENABLE_MASK 0x80000000 +#define YHGCH_HWC_ADDRESS_ADDRESS(x) ((x) << 0) +#define YHGCH_HWC_ADDRESS_ADDRESS_MASK 0xFFFFFFF + +#define YHGCH_HWC_LOCATION 0x080234 +#define YHGCH_HWC_LOCATION_TOP(x) ((x) << 27) +#define YHGCH_HWC_LOCATION_TOP_MASK 0x8000000 +#define YHGCH_HWC_LOCATION_Y(x) ((x) << 16) +#define YHGCH_HWC_LOCATION_Y_MASK 0x7FF0000 +#define YHGCH_HWC_LOCATION_LEFT(x) ((x) << 11) +#define YHGCH_HWC_LOCATION_LEFT_MASK 0x800 +#define YHGCH_HWC_LOCATION_X(x) ((x) << 0) +#define YHGCH_HWC_LOCATION_X_MASK 0x7FF + +#define YHGCH_HWC_COLOR_12 0x080238 +#define YHGCH_HWC_COLOR_12_2_RGB(x) ((x) << 16) +#define YHGCH_HWC_COLOR_12_2_RGB_MASK 0xFFFF0000 +#define YHGCH_HWC_COLOR_12_1_RGB(x) ((x) << 0) +#define YHGCH_HWC_COLOR_12_1_RGB_MASK 0xFFFF + +#define YHGCH_HWC_COLOR_3 0x08023C +#define YHGCH_HWC_COLOR_3_RGB(x) ((x) << 0) +#define YHGCH_HWC_COLOR_3_RGB_MASK 0xFFFF + +/* Auto Centering */ +#define YHGCH_CRT_AUTO_CENTERING_TL 0x080280 +#define YHGCH_CRT_AUTO_CENTERING_TL_TOP(x) ((x) << 16) +#define YHGCH_CRT_AUTO_CENTERING_TL_TOP_MASK 0x7FF0000 + +#define YHGCH_CRT_AUTO_CENTERING_TL_LEFT(x) ((x) << 0) +#define YHGCH_CRT_AUTO_CENTERING_TL_LEFT_MASK 0x7FF + +#define YHGCH_CRT_AUTO_CENTERING_BR 0x080284 +#define YHGCH_CRT_AUTO_CENTERING_BR_BOTTOM(x) ((x) << 16) +#define YHGCH_CRT_AUTO_CENTERING_BR_BOTTOM_MASK 0x7FF0000 + +#define YHGCH_CRT_AUTO_CENTERING_BR_RIGHT(x) ((x) << 0) +#define YHGCH_CRT_AUTO_CENTERING_BR_RIGHT_MASK 0x7FF + +/* register to control panel output */ +#define YHGCH_DISPLAY_CONTROL_HISILE 0x80288 +#define YHGCH_DISPLAY_CONTROL_FPVDDEN(x) ((x) << 0) +#define YHGCH_DISPLAY_CONTROL_PANELDATE(x) ((x) << 1) +#define YHGCH_DISPLAY_CONTROL_FPEN(x) ((x) << 2) +#define YHGCH_DISPLAY_CONTROL_VBIASEN(x) ((x) << 3) + +#define YHGCH_RAW_INTERRUPT 0x80290 +#define YHGCH_RAW_INTERRUPT_VBLANK(x) ((x) << 2) +#define YHGCH_RAW_INTERRUPT_VBLANK_MASK 0x4 + +#define YHGCH_RAW_INTERRUPT_EN 0x80298 +#define YHGCH_RAW_INTERRUPT_EN_VBLANK(x) ((x) << 2) +#define YHGCH_RAW_INTERRUPT_EN_VBLANK_MASK 0x4 + +/* register and values for PLL control */ +#define CRT_PLL1_NS 0x802a8 +#define CRT_PLL1_NS_OUTER_BYPASS(x) ((x) << 30) +#define CRT_PLL1_NS_INTER_BYPASS(x) ((x) << 29) +#define CRT_PLL1_NS_POWERON(x) ((x) << 24) + +#define CRT_PLL1_NS_25MHZ 0x00006691 //640x480 +#define CRT_PLL1_NS_40MHZ 0x00004580 //800x600 +#define CRT_PLL1_NS_65MHZ 0x00002568 //1024x768 +#define CRT_PLL1_NS_83MHZ 0x000027bb //1280x800 +#define CRT_PLL1_NS_106MHZ 0x000027ef //1440x900 +#define CRT_PLL1_NS_108MHZ 0x000027f2 //1280x1024 +#define CRT_PLL1_NS_146MHZ 0x00001575 //1680x1050 +#define CRT_PLL1_NS_148MHZ 0x0000145f //1920x1080 +#define CRT_PLL1_NS_193MHZ 0x000018f7 //1920x1200 + +#define CRT_PLL2_NS 0x802ac +#define CRT_PLL2_NS_25MHZ 0x0 +#define CRT_PLL2_NS_40MHZ 0x0 +#define CRT_PLL2_NS_65MHZ 0x0 +#define CRT_PLL2_NS_83MHZ 0x0 +#define CRT_PLL2_NS_106MHZ 0x0 +#define CRT_PLL2_NS_108MHZ 0x0 +#define CRT_PLL2_NS_146MHZ 0x0 +#define CRT_PLL2_NS_148MHZ 0x0 +#define CRT_PLL2_NS_193MHZ 0x0 + +#endif diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_vdac.c b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_vdac.c new file mode 100644 index 000000000000..22f844de9613 --- /dev/null +++ b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_vdac.c @@ -0,0 +1,123 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <linux/io.h> + +#include <drm/drm_atomic_helper.h> +#include <drm/drm_edid.h> +#include <drm/drm_probe_helper.h> +#include <drm/drm_print.h> +#include <drm/drm_simple_kms_helper.h> + +#include "yhgch_drm_drv.h" +#include "yhgch_drm_regs.h" + +static int yhgch_connector_get_modes(struct drm_connector *connector) +{ + int count; + void *edid; + + if (!drm_probe_ddc(connector->ddc)) + drm_err(connector->dev, "smidebug: not find !!!\n"); + + edid = drm_get_edid(connector, connector->ddc); + if (edid) { + drm_warn(connector->dev, "smidebug:use ddc get mode!!!\n"); + drm_connector_update_edid_property(connector, edid); + count = drm_add_edid_modes(connector, edid); + if (count) + goto out; + } + + count = drm_add_modes_noedid(connector, + connector->dev->mode_config.max_width, + connector->dev->mode_config.max_height); + drm_set_preferred_mode(connector, 1024, 768); + +out: + kfree(edid); + return count; +} + +static int smi_connector_helper_detect_from_ddc(struct drm_connector *connector, + struct drm_modeset_acquire_ctx *ctx, + bool force) +{ + if (drm_connector_helper_detect_from_ddc(connector, ctx, force) + != connector_status_connected) { + drm_err(connector->dev, "smidebug: ddc detect failed, force connect\n"); + return connector_status_connected; + } + return connector_status_connected; +} + +static const struct drm_connector_helper_funcs + yhgch_connector_helper_funcs = { + .get_modes = yhgch_connector_get_modes, + .detect_ctx = smi_connector_helper_detect_from_ddc, +}; + +static const struct drm_connector_funcs yhgch_connector_funcs = { + .fill_modes = drm_helper_probe_single_connector_modes, + .destroy = drm_connector_cleanup, + .reset = drm_atomic_helper_connector_reset, + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, +}; + +static void yhgch_encoder_enable(struct drm_encoder *encoder) +{ + u32 reg; + struct drm_device *dev = encoder->dev; + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); + + reg = readl(priv->mmio + YHGCH_DISPLAY_CONTROL_HISILE); + reg |= YHGCH_DISPLAY_CONTROL_FPVDDEN(1); + reg |= YHGCH_DISPLAY_CONTROL_PANELDATE(1); + reg |= YHGCH_DISPLAY_CONTROL_FPEN(1); + reg |= YHGCH_DISPLAY_CONTROL_VBIASEN(1); + writel(reg, priv->mmio + YHGCH_DISPLAY_CONTROL_HISILE); +} + +static const struct drm_encoder_helper_funcs yhgch_encoder_helper_funcs = { + .enable = yhgch_encoder_enable, +}; + +int yhgch_vdac_init(struct yhgch_drm_private *priv) +{ + struct drm_device *dev = &priv->dev; + struct drm_encoder *encoder = &priv->encoder; + struct drm_crtc *crtc = &priv->crtc; + struct drm_connector *connector = &priv->connector; + struct i2c_adapter *ddc; + int ret; + + ddc = yhgch_ddc_create(priv); + if (IS_ERR(ddc)) { + ret = PTR_ERR(ddc); + drm_err(dev, "failed to create ddc: %d\n", ret); + return ret; + } + + encoder->possible_crtcs = drm_crtc_mask(crtc); + ret = drmm_encoder_init(dev, encoder, NULL, DRM_MODE_ENCODER_DAC, NULL); + if (ret) { + drm_err(dev, "failed to init encoder: %d\n", ret); + return ret; + } + + drm_encoder_helper_add(encoder, &yhgch_encoder_helper_funcs); + + ret = drm_connector_init_with_ddc(dev, connector, + &yhgch_connector_funcs, + DRM_MODE_CONNECTOR_VGA, + ddc); + if (ret) { + drm_err(dev, "failed to init connector: %d\n", ret); + return ret; + } + drm_connector_helper_add(connector, &yhgch_connector_helper_funcs); + + drm_connector_attach_encoder(connector, encoder); + + return 0; +} -- 2.43.5 ^ permalink raw reply related [flat|nested] 22+ messages in thread
* Re: [PATCH v4 1/1] [DRIVER] gpu: drm: add support for Yhgc ZX1000 soc chipset 2025-09-24 6:49 ` [PATCH v4 1/1] " Chu Guangqing @ 2025-09-25 4:15 ` Dmitry Baryshkov 2025-09-25 9:17 ` [PATCH v5 0/1] " Chu Guangqing 0 siblings, 1 reply; 22+ messages in thread From: Dmitry Baryshkov @ 2025-09-25 4:15 UTC (permalink / raw) To: Chu Guangqing Cc: tzimmermann, maarten.lankhorst, mripard, airlied, simona, linux-kernel, dri-devel On Wed, Sep 24, 2025 at 02:49:54PM +0800, Chu Guangqing wrote: > add support for Yhgc BMC soc chipset > > Signed-off-by: Chu Guangqing <chuguangqing@inspur.com> > --- > MAINTAINERS | 5 + > drivers/gpu/drm/Kconfig | 2 + > drivers/gpu/drm/Makefile | 1 + > drivers/gpu/drm/yhgch/yhgch-drm/Kconfig | 11 + > drivers/gpu/drm/yhgch/yhgch-drm/Makefile | 4 + > .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_de.c | 423 ++++++++++++++++++ > .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.c | 310 +++++++++++++ > .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.h | 51 +++ > .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_i2c.c | 114 +++++ > .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_regs.h | 208 +++++++++ > .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_vdac.c | 123 +++++ > 11 files changed, 1252 insertions(+) > create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/Kconfig > create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/Makefile Drop one extra level of subdirectories, please. > create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_de.c > create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.c > create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.h > create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_i2c.c > create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_regs.h > create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_vdac.c > > diff --git a/MAINTAINERS b/MAINTAINERS > index 10614ca41ed0..c79d9361fa81 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -27744,6 +27744,11 @@ S: Maintained > F: Documentation/input/devices/yealink.rst > F: drivers/input/misc/yealink.* > > +YHGC DRM DRIVER > +M: chuguangqing <chuguangqing@inspur.com> > +S: Maintained > +F: drivers/gpu/drm/yhgch > + > Z8530 DRIVER FOR AX.25 > M: Joerg Reuter <jreuter@yaina.de> > L: linux-hams@vger.kernel.org > diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig > index f7ea8e895c0c..fc204f1eb059 100644 > --- a/drivers/gpu/drm/Kconfig > +++ b/drivers/gpu/drm/Kconfig > @@ -396,6 +396,8 @@ source "drivers/gpu/drm/sprd/Kconfig" > > source "drivers/gpu/drm/imagination/Kconfig" > > +source "drivers/gpu/drm/yhgch/yhgch-drm/Kconfig" > + > config DRM_HYPERV > tristate "DRM Support for Hyper-V synthetic video device" > depends on DRM && PCI && HYPERV > diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile > index 4dafbdc8f86a..1b4e7149727d 100644 > --- a/drivers/gpu/drm/Makefile > +++ b/drivers/gpu/drm/Makefile > @@ -231,6 +231,7 @@ obj-y += solomon/ > obj-$(CONFIG_DRM_SPRD) += sprd/ > obj-$(CONFIG_DRM_LOONGSON) += loongson/ > obj-$(CONFIG_DRM_POWERVR) += imagination/ > +obj-$(CONFIG_DRM_YHGCH) += yhgch/yhgch-drm/ > > # Ensure drm headers are self-contained and pass kernel-doc > hdrtest-files := \ > diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/Kconfig b/drivers/gpu/drm/yhgch/yhgch-drm/Kconfig > new file mode 100644 > index 000000000000..695d29409444 > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/yhgch-drm/Kconfig > @@ -0,0 +1,11 @@ > +config DRM_YHGCH > + tristate "DRM Support for Yhgch BMC" > + depends on DRM && PCI && MMU > + select DRM_CLIENT_SELECTION > + select DRM_KMS_HELPER > + select DRM_GEM_SHMEM_HELPER > + help > + Choose this option if you have a Yhgch soc chipset. > + If M is selected the module will be called yhgch-drm. > + IF Y is selected the module will be built into the kernel. > + IF N is selected the module will be excluded from the kernel. > diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/Makefile b/drivers/gpu/drm/yhgch/yhgch-drm/Makefile > new file mode 100644 > index 000000000000..30de2fd27f18 > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/yhgch-drm/Makefile > @@ -0,0 +1,4 @@ > +yhgch-drm-y := yhgch_drm_drv.o yhgch_drm_de.o yhgch_drm_vdac.o yhgch_drm_i2c.o > + > +obj-$(CONFIG_DRM_YHGCH) += yhgch-drm.o > + > diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_de.c b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_de.c > new file mode 100644 > index 000000000000..6450148e5c7c > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_de.c > @@ -0,0 +1,423 @@ > +// SPDX-License-Identifier: GPL-2.0-or-later > + > +#include <linux/delay.h> > +#include <drm/drm_atomic.h> > +#include <drm/drm_gem_atomic_helper.h> > +#include <drm/drm_atomic_helper.h> > +#include <drm/drm_gem_shmem_helper.h> > +#include <drm/drm_format_helper.h> > +#include <drm/drm_damage_helper.h> > +#include <drm/drm_fourcc.h> > + > +#include <drm/drm_vblank.h> > + > +#include "yhgch_drm_drv.h" > +#include "yhgch_drm_regs.h" > + > +struct yhgch_dislay_pll_config { > + u64 hdisplay; > + u64 vdisplay; > + u32 pll1_config_value; > + u32 pll2_config_value; > +}; > + > +static const struct yhgch_dislay_pll_config yhgch_pll_table[] = { > + { 640, 480, CRT_PLL1_NS_25MHZ, CRT_PLL2_NS_25MHZ }, > + { 800, 600, CRT_PLL1_NS_40MHZ, CRT_PLL2_NS_40MHZ }, > + { 1024, 768, CRT_PLL1_NS_65MHZ, CRT_PLL2_NS_65MHZ }, > + { 1280, 1024, CRT_PLL1_NS_108MHZ, CRT_PLL2_NS_108MHZ }, > + { 1920, 1080, CRT_PLL1_NS_148MHZ, CRT_PLL2_NS_148MHZ }, > +}; > + > +static int yhgch_plane_atomic_check(struct drm_plane *plane, > + struct drm_atomic_state *state) > +{ > + struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state, > + plane); > + struct drm_framebuffer *fb = new_plane_state->fb; > + struct drm_crtc_state *new_crtc_state = NULL; > + int ret; > + > + if (!fb) > + return 0; > + > + if (new_plane_state->crtc) > + new_crtc_state = drm_atomic_get_new_crtc_state(state, new_plane_state->crtc); > + > + ret = drm_atomic_helper_check_plane_state(new_plane_state, new_crtc_state, > + DRM_PLANE_NO_SCALING, > + DRM_PLANE_NO_SCALING, > + false, true); > + if (ret) > + return ret; > + else if (!new_plane_state->visible) No need for 'else' here. > + return 0; > + > + if (new_plane_state->dst.x2 > > + new_crtc_state->adjusted_mode.hdisplay || > + new_plane_state->dst.y2 > > + new_crtc_state->adjusted_mode.vdisplay) { > + drm_dbg_atomic(plane->dev, "visible portion of plane is invalid\n"); > + return -EINVAL; > + } You haven't read my comment. You don't need this check. > + > + return 0; > +} > + > +static void yhgch_handle_damage(void *addr_base, struct iosys_map *src, > + struct drm_framebuffer *fb, > + struct drm_rect *clip) > +{ > + struct iosys_map dst; > + > + iosys_map_set_vaddr_iomem(&dst, addr_base); > + iosys_map_incr(&dst, drm_fb_clip_offset(fb->pitches[0], fb->format, clip)); > + drm_fb_memcpy(&dst, fb->pitches, src, fb, clip); > +} > + > +static void yhgch_plane_atomic_update(struct drm_plane *plane, > + struct drm_atomic_state *state) > +{ > + struct drm_plane_state *plane_state = drm_atomic_get_new_plane_state(state, plane); > + struct drm_framebuffer *fb = plane_state->fb; > + struct drm_plane_state *old_plane_state = drm_atomic_get_old_plane_state(state, plane); > + struct drm_shadow_plane_state *shadow_plane_state = to_drm_shadow_plane_state(plane_state); > + struct yhgch_drm_private *priv = to_yhgch_drm_private(plane->dev); > + struct drm_atomic_helper_damage_iter iter; > + struct drm_rect damage; > + u32 reg; > + s64 gpu_addr = 0; > + u32 line_l; > + > + if (!plane_state->crtc || !plane_state->fb) > + return; > + > + if (!plane_state->visible) > + return; > + > + drm_atomic_helper_damage_iter_init(&iter, old_plane_state, plane_state); > + drm_atomic_for_each_plane_damage(&iter, &damage) { > + yhgch_handle_damage(priv->vram_base, shadow_plane_state->data, fb, &damage); > + } > + > + fb->pitches[0] = (fb->pitches[0] + 15) & ~15; > + > + writel(gpu_addr, priv->mmio + YHGCH_CRT_FB_ADDRESS); > + > + reg = fb->width * (fb->format->cpp[0]); No need for braces. > + > + line_l = fb->pitches[0]; > + writel(FIELD_PREP(YHGCH_CRT_FB_WIDTH_WIDTH_MASK, reg) | > + FIELD_PREP(YHGCH_CRT_FB_WIDTH_OFFS_MASK, line_l), > + priv->mmio + YHGCH_CRT_FB_WIDTH); > + > + /* SET PIXEL FORMAT */ > + reg = readl(priv->mmio + YHGCH_CRT_DISP_CTL); > + reg &= ~YHGCH_CRT_DISP_CTL_FORMAT_MASK; > + reg |= FIELD_PREP(YHGCH_CRT_DISP_CTL_FORMAT_MASK, > + fb->format->cpp[0] * 8 / 16); > + writel(reg, priv->mmio + YHGCH_CRT_DISP_CTL); > +} > + > +static const u32 channel_formats1[] = { > + DRM_FORMAT_RGB565, DRM_FORMAT_RGB888, > + DRM_FORMAT_XRGB8888, > +}; > + > +static struct drm_plane_funcs yhgch_plane_funcs = { > + .update_plane = drm_atomic_helper_update_plane, > + .disable_plane = drm_atomic_helper_disable_plane, > + .destroy = drm_plane_cleanup, > + .reset = drm_atomic_helper_plane_reset, > + .atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state, > + .atomic_destroy_state = drm_atomic_helper_plane_destroy_state, > + DRM_GEM_SHADOW_PLANE_FUNCS, > +}; > + > +static const struct drm_plane_helper_funcs yhgch_plane_helper_funcs = { > + DRM_GEM_SHADOW_PLANE_HELPER_FUNCS, > + .atomic_check = yhgch_plane_atomic_check, > + .atomic_update = yhgch_plane_atomic_update, > +}; > + > +static void yhgch_crtc_dpms(struct drm_crtc *crtc, u32 dpms) > +{ > + struct yhgch_drm_private *priv = to_yhgch_drm_private(crtc->dev); > + u32 reg; > + > + reg = readl(priv->mmio + YHGCH_CRT_DISP_CTL); > + reg &= ~YHGCH_CRT_DISP_CTL_DPMS_MASK; > + reg |= FIELD_PREP(YHGCH_CRT_DISP_CTL_DPMS_MASK, dpms); > + reg &= ~YHGCH_CRT_DISP_CTL_TIMING_MASK; > + if (dpms == YHGCH_CRT_DPMS_ON) > + reg |= YHGCH_CRT_DISP_CTL_TIMING(1); > + writel(reg, priv->mmio + YHGCH_CRT_DISP_CTL); > +} > + > +static void yhgch_crtc_atomic_enable(struct drm_crtc *crtc, > + struct drm_atomic_state *old_state) > +{ > + u32 reg; > + struct yhgch_drm_private *priv = to_yhgch_drm_private(crtc->dev); > + > + yhgch_set_power_mode(priv, YHGCH_PW_MODE_CTL_MODE_MODE0); > + > + /* Enable display power gate & LOCALMEM power gate */ > + reg = readl(priv->mmio + YHGCH_CURRENT_GATE); > + reg &= ~YHGCH_CURR_GATE_LOCALMEM_MASK; > + reg &= ~YHGCH_CURR_GATE_DISPLAY_MASK; > + reg |= YHGCH_CURR_GATE_LOCALMEM(1); > + reg |= YHGCH_CURR_GATE_DISPLAY(1); > + yhgch_set_current_gate(priv, reg); > + yhgch_crtc_dpms(crtc, YHGCH_CRT_DPMS_ON); > +} > + > +static void yhgch_crtc_atomic_disable(struct drm_crtc *crtc, > + struct drm_atomic_state *old_state) > +{ > + u32 reg; > + struct yhgch_drm_private *priv = to_yhgch_drm_private(crtc->dev); > + > + yhgch_crtc_dpms(crtc, YHGCH_CRT_DPMS_OFF); > + > + yhgch_set_power_mode(priv, YHGCH_PW_MODE_CTL_MODE_SLEEP); > + > + /* Enable display power gate & LOCALMEM power gate */ > + reg = readl(priv->mmio + YHGCH_CURRENT_GATE); > + reg &= ~YHGCH_CURR_GATE_LOCALMEM_MASK; > + reg &= ~YHGCH_CURR_GATE_DISPLAY_MASK; > + reg |= YHGCH_CURR_GATE_LOCALMEM(0); > + reg |= YHGCH_CURR_GATE_DISPLAY(0); > + yhgch_set_current_gate(priv, reg); > +} > + > +static enum drm_mode_status > +yhgch_crtc_mode_valid(struct drm_crtc *crtc, > + const struct drm_display_mode *mode) > +{ > + size_t i = 0; > + int vrefresh = drm_mode_vrefresh(mode); > + > + if (vrefresh < 59 || vrefresh > 61) > + return MODE_NOCLOCK; > + > + for (i = 0; i < ARRAY_SIZE(yhgch_pll_table); i++) { > + if (yhgch_pll_table[i].hdisplay == mode->hdisplay && > + yhgch_pll_table[i].vdisplay == mode->vdisplay) > + return MODE_OK; > + } > + > + return MODE_BAD; > +} > + > +static void set_vclock_yhgch(struct drm_device *dev, u64 pll) > +{ > + u32 val; > + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); > + > + val = readl(priv->mmio + CRT_PLL1_NS); > + val &= ~(CRT_PLL1_NS_OUTER_BYPASS(1)); > + writel(val, priv->mmio + CRT_PLL1_NS); > + > + val = CRT_PLL1_NS_INTER_BYPASS(1) | CRT_PLL1_NS_POWERON(1); > + writel(val, priv->mmio + CRT_PLL1_NS); > + > + writel(pll, priv->mmio + CRT_PLL1_NS); > + > + usleep_range(1000, 2000); > + > + val = pll & ~(CRT_PLL1_NS_POWERON(1)); > + writel(val, priv->mmio + CRT_PLL1_NS); > + > + usleep_range(1000, 2000); > + > + val &= ~(CRT_PLL1_NS_INTER_BYPASS(1)); > + writel(val, priv->mmio + CRT_PLL1_NS); > + > + usleep_range(1000, 2000); > + > + val |= CRT_PLL1_NS_OUTER_BYPASS(1); > + writel(val, priv->mmio + CRT_PLL1_NS); > +} > + > +static void get_pll_config(u64 x, u64 y, u32 *pll1, u32 *pll2) > +{ > + size_t i; > + size_t count = ARRAY_SIZE(yhgch_pll_table); > + > + for (i = 0; i < count; i++) { > + if (yhgch_pll_table[i].hdisplay == x && > + yhgch_pll_table[i].vdisplay == y) { > + *pll1 = yhgch_pll_table[i].pll1_config_value; > + *pll2 = yhgch_pll_table[i].pll2_config_value; > + return; > + } > + } > + > + /* if found none, we use default value */ > + *pll1 = CRT_PLL1_NS_25MHZ; > + *pll2 = CRT_PLL2_NS_25MHZ; > +} > + > +/* > + * This function takes care the extra registers and bit fields required to > + * setup a mode in board. > + * Explanation about Display Control register: > + * FPGA only supports 7 predefined pixel clocks, and clock select is > + * in bit 4:0 of new register 0x802a8. > + */ > +static u32 display_ctrl_adjust(struct drm_device *dev, > + struct drm_display_mode *mode, > + u32 ctrl) > +{ > + u64 w, h; > + u32 pll1; /* bit[31:0] of PLL */ > + u32 pll2; /* bit[63:32] of PLL */ > + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); > + > + w = mode->hdisplay; > + h = mode->vdisplay; > + > + get_pll_config(w, h, &pll1, &pll2); > + writel(pll2, priv->mmio + CRT_PLL2_NS); > + set_vclock_yhgch(dev, pll1); > + > + /* > + * yhgch has to set up the top-left and bottom-right > + * registers as well. > + * Note that normal chip only use those two register for > + * auto-centering mode. > + */ > + writel(FIELD_PREP(YHGCH_CRT_AUTO_CENTERING_TL_TOP_MASK, 0) | > + FIELD_PREP(YHGCH_CRT_AUTO_CENTERING_TL_LEFT_MASK, 0), > + priv->mmio + YHGCH_CRT_AUTO_CENTERING_TL); > + > + writel(FIELD_PREP(YHGCH_CRT_AUTO_CENTERING_BR_BOTTOM_MASK, h - 1) | > + FIELD_PREP(YHGCH_CRT_AUTO_CENTERING_BR_RIGHT_MASK, w - 1), > + priv->mmio + YHGCH_CRT_AUTO_CENTERING_BR); > + > + /* > + * Assume common fields in ctrl have been properly set before > + * calling this function. > + * This function only sets the extra fields in ctrl. > + */ > + > + /* Set bit 25 of display controller: Select CRT or VGA clock */ > + ctrl &= ~YHGCH_CRT_DISP_CTL_CRTSELECT_MASK; > + ctrl &= ~YHGCH_CRT_DISP_CTL_CLOCK_PHASE_MASK; > + > + ctrl |= YHGCH_CRT_DISP_CTL_CRTSELECT(YHGCH_CRTSELECT_CRT); > + > + /* clock_phase_polarity is 0 */ > + ctrl |= YHGCH_CRT_DISP_CTL_CLOCK_PHASE(0); > + ctrl |= FIELD_PREP(YHGCH_CRT_DISP_CTL_FORMAT_MASK, 2); > + > + writel(ctrl, priv->mmio + YHGCH_CRT_DISP_CTL); > + > + return ctrl; > +} > + > +static void yhgch_crtc_mode_set_nofb(struct drm_crtc *crtc) > +{ > + u32 val; > + struct drm_display_mode *mode = &crtc->state->mode; > + struct drm_device *dev = crtc->dev; > + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); > + u32 width = mode->hsync_end - mode->hsync_start; > + u32 height = mode->vsync_end - mode->vsync_start; > + > + //writel(format_pll_reg(), priv->mmio + YHGCH_CRT_PLL_CTRL); > + writel(FIELD_PREP(YHGCH_CRT_HORZ_TOTAL_TOTAL_MASK, mode->htotal - 1) | > + FIELD_PREP(YHGCH_CRT_HORZ_TOTAL_DISP_END_MASK, mode->hdisplay - 1), > + priv->mmio + YHGCH_CRT_HORZ_TOTAL); > + > + writel(FIELD_PREP(YHGCH_CRT_HORZ_SYNC_WIDTH_MASK, width) | > + FIELD_PREP(YHGCH_CRT_HORZ_SYNC_START_MASK, mode->hsync_start - 1), > + priv->mmio + YHGCH_CRT_HORZ_SYNC); > + > + writel(FIELD_PREP(YHGCH_CRT_VERT_TOTAL_TOTAL_MASK, mode->vtotal - 1) | > + FIELD_PREP(YHGCH_CRT_VERT_TOTAL_DISP_END_MASK, mode->vdisplay - 1), > + priv->mmio + YHGCH_CRT_VERT_TOTAL); > + > + writel(FIELD_PREP(YHGCH_CRT_VERT_SYNC_HEIGHT_MASK, height) | > + FIELD_PREP(YHGCH_CRT_VERT_SYNC_START_MASK, mode->vsync_start - 1), > + priv->mmio + YHGCH_CRT_VERT_SYNC); > + > + val = FIELD_PREP(YHGCH_CRT_DISP_CTL_VSYNC_PHASE_MASK, 0); > + val |= FIELD_PREP(YHGCH_CRT_DISP_CTL_HSYNC_PHASE_MASK, 0); > + val |= YHGCH_CRT_DISP_CTL_TIMING(1); > + val |= YHGCH_CRT_DISP_CTL_PLANE(1); > + > + display_ctrl_adjust(dev, mode, val); > +} > + > +static void yhgch_crtc_atomic_begin(struct drm_crtc *crtc, > + struct drm_atomic_state *old_state) > +{ > + u32 reg; > + struct drm_device *dev = crtc->dev; > + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); > + > + yhgch_set_power_mode(priv, YHGCH_PW_MODE_CTL_MODE_MODE0); > + > + /* Enable display power gate & LOCALMEM power gate */ > + reg = readl(priv->mmio + YHGCH_CURRENT_GATE); > + reg &= ~YHGCH_CURR_GATE_DISPLAY_MASK; > + reg &= ~YHGCH_CURR_GATE_LOCALMEM_MASK; > + reg |= YHGCH_CURR_GATE_DISPLAY(1); > + reg |= YHGCH_CURR_GATE_LOCALMEM(1); > + yhgch_set_current_gate(priv, reg); > + > + /* We can add more initialization as needed. */ > +} > + > +static const struct drm_crtc_funcs yhgch_crtc_funcs = { > + .page_flip = drm_atomic_helper_page_flip, > + .set_config = drm_atomic_helper_set_config, > + .destroy = drm_crtc_cleanup, > + .reset = drm_atomic_helper_crtc_reset, > + .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state, > + .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state, > + > +}; > + > +static const struct drm_crtc_helper_funcs yhgch_crtc_helper_funcs = { > + .mode_set_nofb = yhgch_crtc_mode_set_nofb, > + .atomic_begin = yhgch_crtc_atomic_begin, > + .atomic_enable = yhgch_crtc_atomic_enable, > + .atomic_disable = yhgch_crtc_atomic_disable, > + .mode_valid = yhgch_crtc_mode_valid, > +}; > + > +int yhgch_de_init(struct yhgch_drm_private *priv) > +{ > + struct drm_device *dev = &priv->dev; > + struct drm_crtc *crtc = &priv->crtc; > + struct drm_plane *plane = &priv->primary_plane; > + int ret; > + > + ret = drm_universal_plane_init(dev, plane, 1, &yhgch_plane_funcs, > + channel_formats1, > + ARRAY_SIZE(channel_formats1), > + NULL, > + DRM_PLANE_TYPE_PRIMARY, > + NULL); > + if (ret) { > + drm_err(dev, "failed to init plane: %d\n", ret); > + return ret; > + } > + > + drm_plane_helper_add(plane, &yhgch_plane_helper_funcs); > + drm_plane_enable_fb_damage_clips(plane); > + > + ret = drm_crtc_init_with_planes(dev, crtc, plane, > + NULL, &yhgch_crtc_funcs, NULL); > + if (ret) { > + drm_err(dev, "failed to init crtc: %d\n", ret); > + return ret; > + } > + > + drm_crtc_helper_add(crtc, &yhgch_crtc_helper_funcs); > + > + return 0; > +} > diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.c b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.c > new file mode 100644 > index 000000000000..a68120362ee6 > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.c > @@ -0,0 +1,310 @@ > +// SPDX-License-Identifier: GPL-2.0 > +#include <linux/module.h> > +#include <linux/pci.h> > +#include <linux/bitfield.h> > + > +#include <linux/aperture.h> > +#include <drm/clients/drm_client_setup.h> > + > +#include <drm/drm_atomic_helper.h> > +#include <drm/drm_drv.h> > +#include <drm/drm_fbdev_ttm.h> > + > +#include <drm/drm_gem_framebuffer_helper.h> > +#include <drm/drm_fbdev_shmem.h> > +#include <drm/drm_gem_shmem_helper.h> > +#include <drm/drm_managed.h> > +#include <drm/drm_module.h> > +#include <drm/drm_vblank.h> > + > +#include <drm/drm_probe_helper.h> > + > +#include "yhgch_drm_drv.h" > +#include "yhgch_drm_regs.h" > + > +#define MEM_SIZE_RESERVE4KVM 0x200000 > + > +DEFINE_DRM_GEM_FOPS(yhgch_fops); > + > +int yhgch_dumb_create(struct drm_file *file, struct drm_device *dev, > + struct drm_mode_create_dumb *args) > +{ > + args->width = ALIGN(args->width, 8); > + return drm_gem_shmem_dumb_create(file, dev, args); > +} > + > +static struct drm_driver yhgch_driver = { > + .driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC, > + .fops = &yhgch_fops, > + .name = "yhgch", > + .desc = "yhgch drm driver", > + .major = 3, > + .minor = 1, > + .dumb_create = yhgch_dumb_create, > + DRM_FBDEV_SHMEM_DRIVER_OPS, > +}; > + > +static int __maybe_unused yhgch_pm_suspend(struct device *dev) > +{ > + struct drm_device *drm_dev = dev_get_drvdata(dev); > + > + return drm_mode_config_helper_suspend(drm_dev); > +} > + > +static int __maybe_unused yhgch_pm_resume(struct device *dev) > +{ > + struct drm_device *drm_dev = dev_get_drvdata(dev); > + > + return drm_mode_config_helper_resume(drm_dev); > +} > + > +static const struct dev_pm_ops yhgch_pm_ops = { > + SET_SYSTEM_SLEEP_PM_OPS(yhgch_pm_suspend, > + yhgch_pm_resume) > +}; > + > +static const struct drm_mode_config_funcs yhgch_mode_funcs = { > + .atomic_check = drm_atomic_helper_check, > + .atomic_commit = drm_atomic_helper_commit, > + .fb_create = drm_gem_fb_create_with_dirty, > +}; > + > +static int yhgch_kms_init(struct yhgch_drm_private *priv) > +{ > + struct drm_device *dev = &priv->dev; > + int ret; > + > + ret = drmm_mode_config_init(dev); > + if (ret) > + return ret; > + > + dev->mode_config.min_width = 0; > + dev->mode_config.min_height = 0; > + dev->mode_config.max_width = 1920; > + dev->mode_config.max_height = 1200; > + dev->mode_config.preferred_depth = 24; > + dev->mode_config.prefer_shadow = 1; > + dev->mode_config.funcs = &yhgch_mode_funcs; > + > + ret = yhgch_de_init(priv); > + if (ret) { > + drm_err(dev, "failed to init de: %d\n", ret); > + return ret; > + } > + > + ret = yhgch_vdac_init(priv); > + if (ret) { > + drm_err(dev, "failed to init vdac: %d\n", ret); > + return ret; > + } > + drm_kms_helper_poll_init(dev); > + > + return 0; > +} > + > +/* > + * It can operate in one of three modes: 0, 1 or Sleep. > + */ > +void yhgch_set_power_mode(struct yhgch_drm_private *priv, u32 power_mode) > +{ > + unsigned int control_value = 0; > + void __iomem *mmio = priv->mmio; > + u32 input = 1; > + > + if (power_mode > YHGCH_PW_MODE_CTL_MODE_SLEEP) > + return; > + > + if (power_mode == YHGCH_PW_MODE_CTL_MODE_SLEEP) > + input = 0; > + > + control_value = readl(mmio + YHGCH_POWER_MODE_CTRL); > + control_value &= ~(YHGCH_PW_MODE_CTL_MODE_MASK | > + YHGCH_PW_MODE_CTL_OSC_INPUT_MASK); > + control_value |= FIELD_PREP(YHGCH_PW_MODE_CTL_MODE_MASK, power_mode); > + control_value |= FIELD_PREP(YHGCH_PW_MODE_CTL_OSC_INPUT_MASK, input); > + writel(control_value, mmio + YHGCH_POWER_MODE_CTRL); > +} > + > +void yhgch_set_current_gate(struct yhgch_drm_private *priv, unsigned int gate) > +{ > + u32 gate_reg; > + u32 mode; > + void __iomem *mmio = priv->mmio; > + > + /* Get current power mode. */ > + mode = (readl(mmio + YHGCH_POWER_MODE_CTRL) & > + YHGCH_PW_MODE_CTL_MODE_MASK) >> YHGCH_PW_MODE_CTL_MODE_SHIFT; > + > + switch (mode) { > + case YHGCH_PW_MODE_CTL_MODE_MODE0: > + gate_reg = YHGCH_MODE0_GATE; > + break; > + > + case YHGCH_PW_MODE_CTL_MODE_MODE1: > + gate_reg = YHGCH_MODE1_GATE; > + break; > + > + default: > + gate_reg = YHGCH_MODE0_GATE; > + break; > + } > + writel(gate, mmio + gate_reg); > +} > + > +static void yhgch_hw_config(struct yhgch_drm_private *priv) > +{ > + u32 reg; > + > + /* On hardware reset, power mode 0 is default. */ > + yhgch_set_power_mode(priv, YHGCH_PW_MODE_CTL_MODE_MODE0); > + > + /* Enable display power gate & LOCALMEM power gate */ > + reg = readl(priv->mmio + YHGCH_CURRENT_GATE); > + reg &= ~YHGCH_CURR_GATE_DISPLAY_MASK; > + reg &= ~YHGCH_CURR_GATE_LOCALMEM_MASK; > + reg |= YHGCH_CURR_GATE_DISPLAY(1); > + reg |= YHGCH_CURR_GATE_LOCALMEM(1); > + > + yhgch_set_current_gate(priv, reg); > + > + /* > + * Reset the memory controller. If the memory controller > + * is not reset in chip,the system might hang when sw accesses > + * the memory.The memory should be resetted after > + * changing the MXCLK. > + */ > + reg = readl(priv->mmio + YHGCH_MISC_CTRL); > + reg &= ~YHGCH_MSCCTL_LOCALMEM_RESET_MASK; > + reg |= YHGCH_MSCCTL_LOCALMEM_RESET(0); > + writel(reg, priv->mmio + YHGCH_MISC_CTRL); > + > + reg &= ~YHGCH_MSCCTL_LOCALMEM_RESET_MASK; > + reg |= YHGCH_MSCCTL_LOCALMEM_RESET(1); > + > + writel(reg, priv->mmio + YHGCH_MISC_CTRL); > +} > + > +static int yhgch_hw_map(struct yhgch_drm_private *priv) > +{ > + struct drm_device *dev = &priv->dev; > + struct pci_dev *pdev = to_pci_dev(dev->dev); > + resource_size_t ioaddr, iosize; > + > + ioaddr = pci_resource_start(pdev, 1); > + iosize = pci_resource_len(pdev, 1); > + priv->mmio = devm_ioremap(dev->dev, ioaddr, iosize); > + if (!priv->mmio) { > + drm_err(dev, "Cannot map mmio region\n"); > + return -ENOMEM; > + } > + > + ioaddr = pci_resource_start(pdev, 0); > + iosize = pci_resource_len(pdev, 0); > + priv->vram_base = devm_ioremap_wc(dev->dev, ioaddr, iosize); > + if (!priv->vram_base) { > + drm_err(dev, "Cannot map vram region\n"); > + return -ENOMEM; > + } > + return 0; > +} > + > +static int yhgch_hw_init(struct yhgch_drm_private *priv) > +{ > + int ret; > + > + ret = yhgch_hw_map(priv); > + if (ret) > + return ret; > + yhgch_hw_config(priv); > + return 0; > +} > + > +static int yhgch_pci_probe(struct pci_dev *pdev, > + const struct pci_device_id *ent) > +{ > + struct yhgch_drm_private *priv; > + struct drm_device *dev; > + int ret; > + > + ret = aperture_remove_conflicting_pci_devices(pdev, yhgch_driver.name); > + > + if (ret) > + return ret; > + > + priv = devm_drm_dev_alloc(&pdev->dev, &yhgch_driver, > + struct yhgch_drm_private, dev); > + > + if (IS_ERR(priv)) > + return PTR_ERR(priv); > + > + dev = &priv->dev; > + pci_set_drvdata(pdev, dev); > + > + ret = pcim_enable_device(pdev); > + if (ret) { > + drm_err(dev, "failed to enable pci device: %d\n", ret); > + goto err_return; > + } > + > + ret = yhgch_hw_init(priv); > + if (ret) > + goto err_return; > + > + ret = yhgch_kms_init(priv); > + if (ret) > + goto err_return; > + > + ret = pci_enable_msi(pdev); > + if (ret) > + drm_warn(dev, "enabling MSI failed: %d\n", ret); > + /* reset all the states of crtc/plane/encoder/connector */ > + drm_mode_config_reset(dev); > + > + ret = drm_dev_register(dev, 0); > + if (ret) { > + drm_err(dev, "failed to register drv for userspace access: %d\n", > + ret); > + goto err_return; > + } > + drm_client_setup(dev, NULL); > + > + return 0; > + > +err_return: > + return ret; > +} > + > +static void yhgch_pci_remove(struct pci_dev *pdev) > +{ > + struct drm_device *dev = pci_get_drvdata(pdev); > + > + drm_dev_unregister(dev); > + drm_dev_put(dev); > +} > + > +static void yhgch_pci_shutdown(struct pci_dev *pdev) > +{ > + drm_atomic_helper_shutdown(pci_get_drvdata(pdev)); > +} > + > +static struct pci_device_id yhgch_pci_table[] = { > + { 0x1bd4, 0x0750, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, > + { 0, } > +}; > + > +static struct pci_driver yhgch_pci_driver = { > + .name = "yhgch-drm", > + .id_table = yhgch_pci_table, > + .probe = yhgch_pci_probe, > + .remove = yhgch_pci_remove, > + .shutdown = yhgch_pci_shutdown, > + .driver.pm = &yhgch_pm_ops, > +}; > + > +drm_module_pci_driver(yhgch_pci_driver); > + > +MODULE_DEVICE_TABLE(pci, yhgch_pci_table); > +MODULE_AUTHOR("Inspur"); Is it a name of the author? > +MODULE_DESCRIPTION("DRM Driver for YhgchBMC"); > +MODULE_LICENSE("GPL"); > +MODULE_VERSION("3.1"); > diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.h b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.h > new file mode 100644 > index 000000000000..1b8b1e5b0a43 > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.h > @@ -0,0 +1,51 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > + > +#ifndef YHGCH_DRM_DRV_H > +#define YHGCH_DRM_DRV_H > + > +#include <linux/gpio/consumer.h> > +#include <linux/i2c-algo-bit.h> > +#include <linux/i2c.h> > +#include <linux/version.h> > +#include <linux/bitfield.h> > +#include <drm/drm_framebuffer.h> > +#include <drm/drm_encoder.h> > + > +struct yhgch_ddc { > + struct yhgch_drm_private *priv; > + struct i2c_adapter adapter; > + struct i2c_algo_bit_data bit_data; > +}; > + > +struct yhgch_drm_private { > + /* hw */ > + void __iomem *mmio; > + void __iomem *vram_base; > + > + /* drm */ > + struct drm_device dev; > + struct drm_plane primary_plane; > + struct drm_crtc crtc; > + struct drm_encoder encoder; > + struct drm_connector connector; > +}; > + > +static inline struct yhgch_drm_private *to_yhgch_drm_private(struct drm_device *dev) > +{ > + return container_of(dev, struct yhgch_drm_private, dev); > +} > + > +void yhgch_set_power_mode(struct yhgch_drm_private *priv, > + u32 power_mode); > +void yhgch_set_current_gate(struct yhgch_drm_private *priv, > + u32 gate); > + > +int yhgch_de_init(struct yhgch_drm_private *priv); > +int yhgch_vdac_init(struct yhgch_drm_private *priv); > +int yhgch_mm_init(struct yhgch_drm_private *yhgch); > +struct i2c_adapter *yhgch_ddc_create(struct yhgch_drm_private *priv); > + > +int yhgch_dumb_create(struct drm_file *file, struct drm_device *dev, > + struct drm_mode_create_dumb *args); > + > +#endif > diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_i2c.c b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_i2c.c > new file mode 100644 > index 000000000000..7bbe9a0540d4 > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_i2c.c > @@ -0,0 +1,114 @@ > +// SPDX-License-Identifier: GPL-2.0-or-later > + > +#include <linux/delay.h> > +#include <linux/pci.h> > + > +#include <drm/drm_atomic_helper.h> > +#include <drm/drm_probe_helper.h> > + > +#include <drm/drm_managed.h> > + > +#include "yhgch_drm_drv.h" > + > +#define GPIO_DATA 0x0802A0 > +#define GPIO_DATA_DIRECTION 0x0802A4 > + > +#define I2C_SCL_MASK BIT(0) > +#define I2C_SDA_MASK BIT(1) > + > +static void yhgch_set_i2c_signal(void *data, u32 mask, int value) > +{ > + struct yhgch_ddc *ddc = data; > + struct yhgch_drm_private *priv = ddc->priv; > + u32 tmp_dir = readl(priv->mmio + GPIO_DATA_DIRECTION); > + > + if (value) { > + tmp_dir &= ~mask; > + writel(tmp_dir, priv->mmio + GPIO_DATA_DIRECTION); > + } else { > + u32 tmp_data = readl(priv->mmio + GPIO_DATA); > + > + tmp_data &= ~mask; > + writel(tmp_data, priv->mmio + GPIO_DATA); > + > + tmp_dir |= mask; > + writel(tmp_dir, priv->mmio + GPIO_DATA_DIRECTION); > + } > +} > + > +static int yhgch_get_i2c_signal(void *data, u32 mask) > +{ > + struct yhgch_ddc *ddc = data; > + struct yhgch_drm_private *priv = ddc->priv; > + u32 tmp_dir = readl(priv->mmio + GPIO_DATA_DIRECTION); > + > + if ((tmp_dir & mask) != mask) { > + tmp_dir &= ~mask; > + writel(tmp_dir, priv->mmio + GPIO_DATA_DIRECTION); > + } > + > + return (readl(priv->mmio + GPIO_DATA) & mask) ? 1 : 0; > +} > + > +static void yhgch_ddc_setsda(void *data, int state) > +{ > + yhgch_set_i2c_signal(data, I2C_SDA_MASK, state); > +} > + > +static void yhgch_ddc_setscl(void *data, int state) > +{ > + yhgch_set_i2c_signal(data, I2C_SCL_MASK, state); > +} > + > +static int yhgch_ddc_getsda(void *data) > +{ > + return yhgch_get_i2c_signal(data, I2C_SDA_MASK); > +} > + > +static int yhgch_ddc_getscl(void *data) > +{ > + return yhgch_get_i2c_signal(data, I2C_SCL_MASK); > +} > + > +static void yhgch_ddc_release(struct drm_device *dev, void *res) > +{ > + struct yhgch_ddc *ddc = res; > + > + i2c_del_adapter(&ddc->adapter); > +} > + > +struct i2c_adapter *yhgch_ddc_create(struct yhgch_drm_private *priv) > +{ > + int ret = 0; > + struct yhgch_ddc *ddc; > + struct drm_device *dev = &priv->dev; > + > + ddc = drmm_kzalloc(dev, sizeof(struct yhgch_ddc), GFP_KERNEL); > + if (!ddc) > + return ERR_PTR(-ENOMEM); > + > + ddc->adapter.owner = THIS_MODULE; > + ddc->priv = priv; > + snprintf(ddc->adapter.name, I2C_NAME_SIZE, "INS i2c bit bus"); > + ddc->adapter.dev.parent = priv->dev.dev; > + i2c_set_adapdata(&ddc->adapter, ddc); > + ddc->adapter.algo_data = &ddc->bit_data; > + > + ddc->bit_data.udelay = 20; > + ddc->bit_data.timeout = usecs_to_jiffies(2000); > + ddc->bit_data.data = ddc; > + ddc->bit_data.setsda = yhgch_ddc_setsda; > + ddc->bit_data.setscl = yhgch_ddc_setscl; > + ddc->bit_data.getsda = yhgch_ddc_getsda; > + ddc->bit_data.getscl = yhgch_ddc_getscl; > + > + ret = i2c_bit_add_bus(&ddc->adapter); > + if (ret) > + return ERR_PTR(ret); > + > + ret = drmm_add_action_or_reset(&priv->dev, yhgch_ddc_release, ddc); > + if (ret) > + return ERR_PTR(ret); > + > + return &ddc->adapter; > +} > diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_regs.h b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_regs.h > new file mode 100644 > index 000000000000..cecb6173a445 > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_regs.h > @@ -0,0 +1,208 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > + > +#ifndef YHGCH_DRM_HW_H > +#define YHGCH_DRM_HW_H > + > +/* register definition */ > +#define YHGCH_MISC_CTRL 0x4 > + > +#define YHGCH_MSCCTL_LOCALMEM_RESET(x) ((x) << 6) > +#define YHGCH_MSCCTL_LOCALMEM_RESET_MASK 0x40 > + > +#define YHGCH_CURRENT_GATE 0x000040 > +#define YHGCH_CURR_GATE_DISPLAY(x) ((x) << 2) > +#define YHGCH_CURR_GATE_DISPLAY_MASK 0x4 > + > +#define YHGCH_CURR_GATE_LOCALMEM(x) ((x) << 1) > +#define YHGCH_CURR_GATE_LOCALMEM_MASK 0x2 > + > +#define YHGCH_MODE0_GATE 0x000044 > +#define YHGCH_MODE1_GATE 0x000048 > +#define YHGCH_POWER_MODE_CTRL 0x00004C > + > +#define YHGCH_PW_MODE_CTL_OSC_INPUT(x) ((x) << 3) > +#define YHGCH_PW_MODE_CTL_OSC_INPUT_MASK 0x8 > + > +#define YHGCH_PW_MODE_CTL_MODE(x) ((x) << 0) > +#define YHGCH_PW_MODE_CTL_MODE_MASK 0x03 > +#define YHGCH_PW_MODE_CTL_MODE_SHIFT 0 > + > +#define YHGCH_PW_MODE_CTL_MODE_MODE0 0 > +#define YHGCH_PW_MODE_CTL_MODE_MODE1 1 > +#define YHGCH_PW_MODE_CTL_MODE_SLEEP 2 > + > +//#define YHGCH_CRT_PLL_CTRL 0x000060 > + > +#define YHGCH_PLL_CTRL_BYPASS(x) ((x) << 18) > +#define YHGCH_PLL_CTRL_BYPASS_MASK 0x40000 > + > +#define YHGCH_PLL_CTRL_POWER(x) ((x) << 17) > +#define YHGCH_PLL_CTRL_POWER_MASK 0x20000 > + > +#define YHGCH_PLL_CTRL_INPUT(x) ((x) << 16) > +#define YHGCH_PLL_CTRL_INPUT_MASK 0x10000 > + > +#define YHGCH_PLL_CTRL_POD(x) ((x) << 14) > +#define YHGCH_PLL_CTRL_POD_MASK 0xC000 > + > +#define YHGCH_PLL_CTRL_OD(x) ((x) << 12) > +#define YHGCH_PLL_CTRL_OD_MASK 0x3000 > + > +#define YHGCH_PLL_CTRL_N(x) ((x) << 8) > +#define YHGCH_PLL_CTRL_N_MASK 0xF00 > + > +#define YHGCH_PLL_CTRL_M(x) ((x) << 0) > +#define YHGCH_PLL_CTRL_M_MASK 0xFF > + > +#define YHGCH_CRT_DISP_CTL 0x80200 > + > +#define YHGCH_CRT_DISP_CTL_DPMS(x) ((x) << 30) > +#define YHGCH_CRT_DISP_CTL_DPMS_MASK 0xc0000000 > + > +#define YHGCH_CRT_DPMS_ON 0 > +#define YHGCH_CRT_DPMS_OFF 3 > + > +#define YHGCH_CRT_DISP_CTL_CRTSELECT(x) ((x) << 25) > +#define YHGCH_CRT_DISP_CTL_CRTSELECT_MASK 0x2000000 > + > +#define YHGCH_CRTSELECT_CRT 1 > + > +#define YHGCH_CRT_DISP_CTL_CLOCK_PHASE(x) ((x) << 14) > +#define YHGCH_CRT_DISP_CTL_CLOCK_PHASE_MASK 0x4000 > + > +#define YHGCH_CRT_DISP_CTL_VSYNC_PHASE(x) ((x) << 13) > +#define YHGCH_CRT_DISP_CTL_VSYNC_PHASE_MASK 0x2000 > + > +#define YHGCH_CRT_DISP_CTL_HSYNC_PHASE(x) ((x) << 12) > +#define YHGCH_CRT_DISP_CTL_HSYNC_PHASE_MASK 0x1000 > + > +#define YHGCH_CRT_DISP_CTL_TIMING(x) ((x) << 8) > +#define YHGCH_CRT_DISP_CTL_TIMING_MASK 0x100 > + > +#define YHGCH_CRT_DISP_CTL_PLANE(x) ((x) << 2) > +#define YHGCH_CRT_DISP_CTL_PLANE_MASK 4 > + > +#define YHGCH_CRT_DISP_CTL_FORMAT(x) ((x) << 0) > +#define YHGCH_CRT_DISP_CTL_FORMAT_MASK 0x03 > + > +#define YHGCH_CRT_FB_ADDRESS 0x080204 > + > +#define YHGCH_CRT_FB_WIDTH 0x080208 > +#define YHGCH_CRT_FB_WIDTH_WIDTH(x) ((x) << 16) > +#define YHGCH_CRT_FB_WIDTH_WIDTH_MASK 0x3FFF0000 > +#define YHGCH_CRT_FB_WIDTH_OFFS(x) ((x) << 0) > +#define YHGCH_CRT_FB_WIDTH_OFFS_MASK 0x3FFF > + > +#define YHGCH_CRT_HORZ_TOTAL 0x08020C > +#define YHGCH_CRT_HORZ_TOTAL_TOTAL(x) ((x) << 16) > +#define YHGCH_CRT_HORZ_TOTAL_TOTAL_MASK 0xFFF0000 > + > +#define YHGCH_CRT_HORZ_TOTAL_DISP_END(x) ((x) << 0) > +#define YHGCH_CRT_HORZ_TOTAL_DISP_END_MASK 0xFFF > + > +#define YHGCH_CRT_HORZ_SYNC 0x080210 > +#define YHGCH_CRT_HORZ_SYNC_WIDTH(x) ((x) << 16) > +#define YHGCH_CRT_HORZ_SYNC_WIDTH_MASK 0xFF0000 > + > +#define YHGCH_CRT_HORZ_SYNC_START(x) ((x) << 0) > +#define YHGCH_CRT_HORZ_SYNC_START_MASK 0xFFF > + > +#define YHGCH_CRT_VERT_TOTAL 0x080214 > +#define YHGCH_CRT_VERT_TOTAL_TOTAL(x) ((x) << 16) > +#define YHGCH_CRT_VERT_TOTAL_TOTAL_MASK 0x7FFF0000 > + > +#define YHGCH_CRT_VERT_TOTAL_DISP_END(x) ((x) << 0) > +#define YHGCH_CRT_VERT_TOTAL_DISP_END_MASK 0x7FF > + > +#define YHGCH_CRT_VERT_SYNC 0x080218 > +#define YHGCH_CRT_VERT_SYNC_HEIGHT(x) ((x) << 16) > +#define YHGCH_CRT_VERT_SYNC_HEIGHT_MASK 0x3F0000 > + > +#define YHGCH_CRT_VERT_SYNC_START(x) ((x) << 0) > +#define YHGCH_CRT_VERT_SYNC_START_MASK 0x7FF > + > +/* Hardware Cursor */ > +#define YHGCH_HWC_ADDRESS 0x080230 > +#define YHGCH_HWC_ADDRESS_ENABLE(x) ((x) << 31) > +#define YHGCH_HWC_ADDRESS_ENABLE_MASK 0x80000000 > +#define YHGCH_HWC_ADDRESS_ADDRESS(x) ((x) << 0) > +#define YHGCH_HWC_ADDRESS_ADDRESS_MASK 0xFFFFFFF > + > +#define YHGCH_HWC_LOCATION 0x080234 > +#define YHGCH_HWC_LOCATION_TOP(x) ((x) << 27) > +#define YHGCH_HWC_LOCATION_TOP_MASK 0x8000000 > +#define YHGCH_HWC_LOCATION_Y(x) ((x) << 16) > +#define YHGCH_HWC_LOCATION_Y_MASK 0x7FF0000 > +#define YHGCH_HWC_LOCATION_LEFT(x) ((x) << 11) > +#define YHGCH_HWC_LOCATION_LEFT_MASK 0x800 > +#define YHGCH_HWC_LOCATION_X(x) ((x) << 0) > +#define YHGCH_HWC_LOCATION_X_MASK 0x7FF > + > +#define YHGCH_HWC_COLOR_12 0x080238 > +#define YHGCH_HWC_COLOR_12_2_RGB(x) ((x) << 16) > +#define YHGCH_HWC_COLOR_12_2_RGB_MASK 0xFFFF0000 > +#define YHGCH_HWC_COLOR_12_1_RGB(x) ((x) << 0) > +#define YHGCH_HWC_COLOR_12_1_RGB_MASK 0xFFFF > + > +#define YHGCH_HWC_COLOR_3 0x08023C > +#define YHGCH_HWC_COLOR_3_RGB(x) ((x) << 0) > +#define YHGCH_HWC_COLOR_3_RGB_MASK 0xFFFF > + > +/* Auto Centering */ > +#define YHGCH_CRT_AUTO_CENTERING_TL 0x080280 > +#define YHGCH_CRT_AUTO_CENTERING_TL_TOP(x) ((x) << 16) > +#define YHGCH_CRT_AUTO_CENTERING_TL_TOP_MASK 0x7FF0000 > + > +#define YHGCH_CRT_AUTO_CENTERING_TL_LEFT(x) ((x) << 0) > +#define YHGCH_CRT_AUTO_CENTERING_TL_LEFT_MASK 0x7FF > + > +#define YHGCH_CRT_AUTO_CENTERING_BR 0x080284 > +#define YHGCH_CRT_AUTO_CENTERING_BR_BOTTOM(x) ((x) << 16) > +#define YHGCH_CRT_AUTO_CENTERING_BR_BOTTOM_MASK 0x7FF0000 > + > +#define YHGCH_CRT_AUTO_CENTERING_BR_RIGHT(x) ((x) << 0) > +#define YHGCH_CRT_AUTO_CENTERING_BR_RIGHT_MASK 0x7FF > + > +/* register to control panel output */ > +#define YHGCH_DISPLAY_CONTROL_HISILE 0x80288 > +#define YHGCH_DISPLAY_CONTROL_FPVDDEN(x) ((x) << 0) > +#define YHGCH_DISPLAY_CONTROL_PANELDATE(x) ((x) << 1) > +#define YHGCH_DISPLAY_CONTROL_FPEN(x) ((x) << 2) > +#define YHGCH_DISPLAY_CONTROL_VBIASEN(x) ((x) << 3) > + > +#define YHGCH_RAW_INTERRUPT 0x80290 > +#define YHGCH_RAW_INTERRUPT_VBLANK(x) ((x) << 2) > +#define YHGCH_RAW_INTERRUPT_VBLANK_MASK 0x4 > + > +#define YHGCH_RAW_INTERRUPT_EN 0x80298 > +#define YHGCH_RAW_INTERRUPT_EN_VBLANK(x) ((x) << 2) > +#define YHGCH_RAW_INTERRUPT_EN_VBLANK_MASK 0x4 > + > +/* register and values for PLL control */ > +#define CRT_PLL1_NS 0x802a8 > +#define CRT_PLL1_NS_OUTER_BYPASS(x) ((x) << 30) > +#define CRT_PLL1_NS_INTER_BYPASS(x) ((x) << 29) > +#define CRT_PLL1_NS_POWERON(x) ((x) << 24) > + > +#define CRT_PLL1_NS_25MHZ 0x00006691 //640x480 > +#define CRT_PLL1_NS_40MHZ 0x00004580 //800x600 > +#define CRT_PLL1_NS_65MHZ 0x00002568 //1024x768 > +#define CRT_PLL1_NS_83MHZ 0x000027bb //1280x800 > +#define CRT_PLL1_NS_106MHZ 0x000027ef //1440x900 > +#define CRT_PLL1_NS_108MHZ 0x000027f2 //1280x1024 > +#define CRT_PLL1_NS_146MHZ 0x00001575 //1680x1050 > +#define CRT_PLL1_NS_148MHZ 0x0000145f //1920x1080 > +#define CRT_PLL1_NS_193MHZ 0x000018f7 //1920x1200 > + > +#define CRT_PLL2_NS 0x802ac > +#define CRT_PLL2_NS_25MHZ 0x0 > +#define CRT_PLL2_NS_40MHZ 0x0 > +#define CRT_PLL2_NS_65MHZ 0x0 > +#define CRT_PLL2_NS_83MHZ 0x0 > +#define CRT_PLL2_NS_106MHZ 0x0 > +#define CRT_PLL2_NS_108MHZ 0x0 > +#define CRT_PLL2_NS_146MHZ 0x0 > +#define CRT_PLL2_NS_148MHZ 0x0 > +#define CRT_PLL2_NS_193MHZ 0x0 > + > +#endif > diff --git a/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_vdac.c b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_vdac.c > new file mode 100644 > index 000000000000..22f844de9613 > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_vdac.c > @@ -0,0 +1,123 @@ > +// SPDX-License-Identifier: GPL-2.0 > + > +#include <linux/io.h> > + > +#include <drm/drm_atomic_helper.h> > +#include <drm/drm_edid.h> > +#include <drm/drm_probe_helper.h> > +#include <drm/drm_print.h> > +#include <drm/drm_simple_kms_helper.h> > + > +#include "yhgch_drm_drv.h" > +#include "yhgch_drm_regs.h" > + > +static int yhgch_connector_get_modes(struct drm_connector *connector) > +{ > + int count; > + void *edid; > + > + if (!drm_probe_ddc(connector->ddc)) > + drm_err(connector->dev, "smidebug: not find !!!\n"); Is there a need to probe here just print an error? > + > + edid = drm_get_edid(connector, connector->ddc); Nope, drm_edid_read(). > + if (edid) { > + drm_warn(connector->dev, "smidebug:use ddc get mode!!!\n"); Nope > + drm_connector_update_edid_property(connector, edid); > + count = drm_add_edid_modes(connector, edid); > + if (count) > + goto out; > + } > + > + count = drm_add_modes_noedid(connector, > + connector->dev->mode_config.max_width, > + connector->dev->mode_config.max_height); > + drm_set_preferred_mode(connector, 1024, 768); > + > +out: > + kfree(edid); > + return count; > +} > + > +static int smi_connector_helper_detect_from_ddc(struct drm_connector *connector, Why all of sudden this function doesn't follow the naming of other functions in the driver. > + struct drm_modeset_acquire_ctx *ctx, > + bool force) > +{ > + if (drm_connector_helper_detect_from_ddc(connector, ctx, force) > + != connector_status_connected) { > + drm_err(connector->dev, "smidebug: ddc detect failed, force connect\n"); Then what's the point of this probe? Return connected always. > + return connector_status_connected; > + } > + return connector_status_connected; > +} > + > +static const struct drm_connector_helper_funcs > + yhgch_connector_helper_funcs = { > + .get_modes = yhgch_connector_get_modes, > + .detect_ctx = smi_connector_helper_detect_from_ddc, > +}; > + > +static const struct drm_connector_funcs yhgch_connector_funcs = { > + .fill_modes = drm_helper_probe_single_connector_modes, > + .destroy = drm_connector_cleanup, > + .reset = drm_atomic_helper_connector_reset, > + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, > + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, > +}; > + > +static void yhgch_encoder_enable(struct drm_encoder *encoder) > +{ > + u32 reg; > + struct drm_device *dev = encoder->dev; > + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); > + > + reg = readl(priv->mmio + YHGCH_DISPLAY_CONTROL_HISILE); > + reg |= YHGCH_DISPLAY_CONTROL_FPVDDEN(1); > + reg |= YHGCH_DISPLAY_CONTROL_PANELDATE(1); > + reg |= YHGCH_DISPLAY_CONTROL_FPEN(1); > + reg |= YHGCH_DISPLAY_CONTROL_VBIASEN(1); > + writel(reg, priv->mmio + YHGCH_DISPLAY_CONTROL_HISILE); > +} > + > +static const struct drm_encoder_helper_funcs yhgch_encoder_helper_funcs = { > + .enable = yhgch_encoder_enable, No .disable() ? > +}; > + > +int yhgch_vdac_init(struct yhgch_drm_private *priv) > +{ > + struct drm_device *dev = &priv->dev; > + struct drm_encoder *encoder = &priv->encoder; > + struct drm_crtc *crtc = &priv->crtc; > + struct drm_connector *connector = &priv->connector; > + struct i2c_adapter *ddc; > + int ret; > + > + ddc = yhgch_ddc_create(priv); > + if (IS_ERR(ddc)) { > + ret = PTR_ERR(ddc); > + drm_err(dev, "failed to create ddc: %d\n", ret); > + return ret; > + } > + > + encoder->possible_crtcs = drm_crtc_mask(crtc); > + ret = drmm_encoder_init(dev, encoder, NULL, DRM_MODE_ENCODER_DAC, NULL); > + if (ret) { > + drm_err(dev, "failed to init encoder: %d\n", ret); > + return ret; > + } > + > + drm_encoder_helper_add(encoder, &yhgch_encoder_helper_funcs); > + > + ret = drm_connector_init_with_ddc(dev, connector, > + &yhgch_connector_funcs, > + DRM_MODE_CONNECTOR_VGA, > + ddc); > + if (ret) { > + drm_err(dev, "failed to init connector: %d\n", ret); > + return ret; > + } > + drm_connector_helper_add(connector, &yhgch_connector_helper_funcs); > + > + drm_connector_attach_encoder(connector, encoder); > + > + return 0; > +} > -- > 2.43.5 > -- With best wishes Dmitry ^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH v5 0/1] [DRIVER] gpu: drm: add support for Yhgc ZX1000 soc chipset 2025-09-25 4:15 ` Dmitry Baryshkov @ 2025-09-25 9:17 ` Chu Guangqing 2025-09-25 9:17 ` [PATCH v5 1/1] " Chu Guangqing 2025-09-25 22:15 ` [PATCH v5 0/1] " Dmitry Baryshkov 0 siblings, 2 replies; 22+ messages in thread From: Chu Guangqing @ 2025-09-25 9:17 UTC (permalink / raw) To: tzimmermann, maarten.lankhorst, mripard, airlied, simona, dmitry.baryshkov Cc: linux-kernel, dri-devel, Chu Guangqing Hi Dmitry, I have read Documentation/process/submitting-patches.rst. however, the content is quite extensive. Please point out any omissions if there are any. Q:Is there a need to probe here just print an error? A: it will be re-probe at detect_ctx Q:No .disable() ? A: yes, we have only implemented the enable function v5: - remove extra level of subdiretories, change to driver/gpu/drm/yhgch - remove else from > + else if (!new_plane_state->visible) - remove extra check in function yhgch_plane_atomic_check - remove the extra parentheses - change the author like other modules - use drm_edit_read function instead drm_get_edit - remove debug info drm_warn call - rename function name smi_connector_helper_detect_from_ddc to yhgch_connector_helper_detect_from_ddc, remove extra return statement. v4: - remove VRAM helpers from Kconfig - use the coding style in ast/mgag200 for the DDC - use plane_state->dst instead of crtc_h/w/x/y. - delete duplicate framebuffer's atomic_check. - use FIELD_PREP() directly. - use dev->mode_config. - delete unnecessary drm_atomic_helper_shutdown call - add AUTHOR - using .enable instead (https://lore.kernel.org/all/20250924064954.3921-1-chuguangqing@inspur.com/) v3: - The order of the code blocks has been adjusted, and the "warn-on" branch has been removed. - removed the related formats for the alpha channel. - removed the atomic_flush function. - have removed the empty line. - have removed the error message here. - replaced it with the drmm_encoder_init function. (https://lore.kernel.org/all/20250910022311.2655-1-chuguangqing@inspur.com/) v2: - Delete unnecessary comments - Delete unnecessary branch - Use drm_atomic_helper_check_plane_state - remove the alpha formats form this list. - use w,h rather than x, y - delete type casting - use a simple call to drm_atomic_helper_shutdown() - delete yhgch_load function - delete vblanking code - delete unneeded i2c type (https://lore.kernel.org/all/20250903054533.68540-1-chuguangqing@inspur.com/) v1: (https://lore.kernel.org/all/20250808053508.52202-1-chuguangqing@inspur.com/) Chu Guangqing (1): [DRIVER] gpu: drm: add support for Yhgc ZX1000 soc chipset MAINTAINERS | 5 + drivers/gpu/drm/Kconfig | 2 + drivers/gpu/drm/Makefile | 1 + drivers/gpu/drm/yhgch/Kconfig | 11 + drivers/gpu/drm/yhgch/Makefile | 4 + drivers/gpu/drm/yhgch/yhgch_drm_de.c | 415 +++++++++++++++++++++++++ drivers/gpu/drm/yhgch/yhgch_drm_drv.c | 310 ++++++++++++++++++ drivers/gpu/drm/yhgch/yhgch_drm_drv.h | 51 +++ drivers/gpu/drm/yhgch/yhgch_drm_i2c.c | 114 +++++++ drivers/gpu/drm/yhgch/yhgch_drm_regs.h | 208 +++++++++++++ drivers/gpu/drm/yhgch/yhgch_drm_vdac.c | 121 +++++++ 11 files changed, 1242 insertions(+) create mode 100644 drivers/gpu/drm/yhgch/Kconfig create mode 100644 drivers/gpu/drm/yhgch/Makefile create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_de.c create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_drv.c create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_drv.h create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_i2c.c create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_regs.h create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_vdac.c -- 2.43.5 ^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH v5 1/1] [DRIVER] gpu: drm: add support for Yhgc ZX1000 soc chipset 2025-09-25 9:17 ` [PATCH v5 0/1] " Chu Guangqing @ 2025-09-25 9:17 ` Chu Guangqing 2025-09-25 22:20 ` Dmitry Baryshkov 2025-09-27 20:40 ` [PATCH v5 1/1] [DRIVER] gpu: drm: add support for Yhgc ZX1000 soc chipset kernel test robot 2025-09-25 22:15 ` [PATCH v5 0/1] " Dmitry Baryshkov 1 sibling, 2 replies; 22+ messages in thread From: Chu Guangqing @ 2025-09-25 9:17 UTC (permalink / raw) To: tzimmermann, maarten.lankhorst, mripard, airlied, simona, dmitry.baryshkov Cc: linux-kernel, dri-devel, Chu Guangqing add support for Yhgc BMC soc chipset Signed-off-by: Chu Guangqing <chuguangqing@inspur.com> --- MAINTAINERS | 5 + drivers/gpu/drm/Kconfig | 2 + drivers/gpu/drm/Makefile | 1 + drivers/gpu/drm/yhgch/Kconfig | 11 + drivers/gpu/drm/yhgch/Makefile | 4 + drivers/gpu/drm/yhgch/yhgch_drm_de.c | 415 +++++++++++++++++++++++++ drivers/gpu/drm/yhgch/yhgch_drm_drv.c | 310 ++++++++++++++++++ drivers/gpu/drm/yhgch/yhgch_drm_drv.h | 51 +++ drivers/gpu/drm/yhgch/yhgch_drm_i2c.c | 114 +++++++ drivers/gpu/drm/yhgch/yhgch_drm_regs.h | 208 +++++++++++++ drivers/gpu/drm/yhgch/yhgch_drm_vdac.c | 121 +++++++ 11 files changed, 1242 insertions(+) create mode 100644 drivers/gpu/drm/yhgch/Kconfig create mode 100644 drivers/gpu/drm/yhgch/Makefile create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_de.c create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_drv.c create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_drv.h create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_i2c.c create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_regs.h create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_vdac.c diff --git a/MAINTAINERS b/MAINTAINERS index 10614ca41ed0..c79d9361fa81 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -27744,6 +27744,11 @@ S: Maintained F: Documentation/input/devices/yealink.rst F: drivers/input/misc/yealink.* +YHGC DRM DRIVER +M: chuguangqing <chuguangqing@inspur.com> +S: Maintained +F: drivers/gpu/drm/yhgch + Z8530 DRIVER FOR AX.25 M: Joerg Reuter <jreuter@yaina.de> L: linux-hams@vger.kernel.org diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index f7ea8e895c0c..8e0b1d12c81f 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -396,6 +396,8 @@ source "drivers/gpu/drm/sprd/Kconfig" source "drivers/gpu/drm/imagination/Kconfig" +source "drivers/gpu/drm/yhgch/Kconfig" + config DRM_HYPERV tristate "DRM Support for Hyper-V synthetic video device" depends on DRM && PCI && HYPERV diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile index 4dafbdc8f86a..f344e0173b29 100644 --- a/drivers/gpu/drm/Makefile +++ b/drivers/gpu/drm/Makefile @@ -231,6 +231,7 @@ obj-y += solomon/ obj-$(CONFIG_DRM_SPRD) += sprd/ obj-$(CONFIG_DRM_LOONGSON) += loongson/ obj-$(CONFIG_DRM_POWERVR) += imagination/ +obj-$(CONFIG_DRM_YHGCH) += yhgch/ # Ensure drm headers are self-contained and pass kernel-doc hdrtest-files := \ diff --git a/drivers/gpu/drm/yhgch/Kconfig b/drivers/gpu/drm/yhgch/Kconfig new file mode 100644 index 000000000000..695d29409444 --- /dev/null +++ b/drivers/gpu/drm/yhgch/Kconfig @@ -0,0 +1,11 @@ +config DRM_YHGCH + tristate "DRM Support for Yhgch BMC" + depends on DRM && PCI && MMU + select DRM_CLIENT_SELECTION + select DRM_KMS_HELPER + select DRM_GEM_SHMEM_HELPER + help + Choose this option if you have a Yhgch soc chipset. + If M is selected the module will be called yhgch-drm. + IF Y is selected the module will be built into the kernel. + IF N is selected the module will be excluded from the kernel. diff --git a/drivers/gpu/drm/yhgch/Makefile b/drivers/gpu/drm/yhgch/Makefile new file mode 100644 index 000000000000..30de2fd27f18 --- /dev/null +++ b/drivers/gpu/drm/yhgch/Makefile @@ -0,0 +1,4 @@ +yhgch-drm-y := yhgch_drm_drv.o yhgch_drm_de.o yhgch_drm_vdac.o yhgch_drm_i2c.o + +obj-$(CONFIG_DRM_YHGCH) += yhgch-drm.o + diff --git a/drivers/gpu/drm/yhgch/yhgch_drm_de.c b/drivers/gpu/drm/yhgch/yhgch_drm_de.c new file mode 100644 index 000000000000..c2c38c3e7637 --- /dev/null +++ b/drivers/gpu/drm/yhgch/yhgch_drm_de.c @@ -0,0 +1,415 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include <linux/delay.h> +#include <drm/drm_atomic.h> +#include <drm/drm_gem_atomic_helper.h> +#include <drm/drm_atomic_helper.h> +#include <drm/drm_gem_shmem_helper.h> +#include <drm/drm_format_helper.h> +#include <drm/drm_damage_helper.h> +#include <drm/drm_fourcc.h> + +#include <drm/drm_vblank.h> + +#include "yhgch_drm_drv.h" +#include "yhgch_drm_regs.h" + +struct yhgch_dislay_pll_config { + u64 hdisplay; + u64 vdisplay; + u32 pll1_config_value; + u32 pll2_config_value; +}; + +static const struct yhgch_dislay_pll_config yhgch_pll_table[] = { + { 640, 480, CRT_PLL1_NS_25MHZ, CRT_PLL2_NS_25MHZ }, + { 800, 600, CRT_PLL1_NS_40MHZ, CRT_PLL2_NS_40MHZ }, + { 1024, 768, CRT_PLL1_NS_65MHZ, CRT_PLL2_NS_65MHZ }, + { 1280, 1024, CRT_PLL1_NS_108MHZ, CRT_PLL2_NS_108MHZ }, + { 1920, 1080, CRT_PLL1_NS_148MHZ, CRT_PLL2_NS_148MHZ }, +}; + +static int yhgch_plane_atomic_check(struct drm_plane *plane, + struct drm_atomic_state *state) +{ + struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state, + plane); + struct drm_framebuffer *fb = new_plane_state->fb; + struct drm_crtc_state *new_crtc_state = NULL; + int ret; + + if (!fb) + return 0; + + if (new_plane_state->crtc) + new_crtc_state = drm_atomic_get_new_crtc_state(state, new_plane_state->crtc); + + ret = drm_atomic_helper_check_plane_state(new_plane_state, new_crtc_state, + DRM_PLANE_NO_SCALING, + DRM_PLANE_NO_SCALING, + false, true); + if (ret) + return ret; + if (!new_plane_state->visible) + return 0; + + return 0; +} + +static void yhgch_handle_damage(void *addr_base, struct iosys_map *src, + struct drm_framebuffer *fb, + struct drm_rect *clip) +{ + struct iosys_map dst; + + iosys_map_set_vaddr_iomem(&dst, addr_base); + iosys_map_incr(&dst, drm_fb_clip_offset(fb->pitches[0], fb->format, clip)); + drm_fb_memcpy(&dst, fb->pitches, src, fb, clip); +} + +static void yhgch_plane_atomic_update(struct drm_plane *plane, + struct drm_atomic_state *state) +{ + struct drm_plane_state *plane_state = drm_atomic_get_new_plane_state(state, plane); + struct drm_framebuffer *fb = plane_state->fb; + struct drm_plane_state *old_plane_state = drm_atomic_get_old_plane_state(state, plane); + struct drm_shadow_plane_state *shadow_plane_state = to_drm_shadow_plane_state(plane_state); + struct yhgch_drm_private *priv = to_yhgch_drm_private(plane->dev); + struct drm_atomic_helper_damage_iter iter; + struct drm_rect damage; + u32 reg; + s64 gpu_addr = 0; + u32 line_l; + + if (!plane_state->crtc || !plane_state->fb) + return; + + if (!plane_state->visible) + return; + + drm_atomic_helper_damage_iter_init(&iter, old_plane_state, plane_state); + drm_atomic_for_each_plane_damage(&iter, &damage) { + yhgch_handle_damage(priv->vram_base, shadow_plane_state->data, fb, &damage); + } + + fb->pitches[0] = (fb->pitches[0] + 15) & ~15; + + writel(gpu_addr, priv->mmio + YHGCH_CRT_FB_ADDRESS); + + reg = fb->width * fb->format->cpp[0]; + + line_l = fb->pitches[0]; + writel(FIELD_PREP(YHGCH_CRT_FB_WIDTH_WIDTH_MASK, reg) | + FIELD_PREP(YHGCH_CRT_FB_WIDTH_OFFS_MASK, line_l), + priv->mmio + YHGCH_CRT_FB_WIDTH); + + /* SET PIXEL FORMAT */ + reg = readl(priv->mmio + YHGCH_CRT_DISP_CTL); + reg &= ~YHGCH_CRT_DISP_CTL_FORMAT_MASK; + reg |= FIELD_PREP(YHGCH_CRT_DISP_CTL_FORMAT_MASK, + fb->format->cpp[0] * 8 / 16); + writel(reg, priv->mmio + YHGCH_CRT_DISP_CTL); +} + +static const u32 channel_formats1[] = { + DRM_FORMAT_RGB565, DRM_FORMAT_RGB888, + DRM_FORMAT_XRGB8888, +}; + +static struct drm_plane_funcs yhgch_plane_funcs = { + .update_plane = drm_atomic_helper_update_plane, + .disable_plane = drm_atomic_helper_disable_plane, + .destroy = drm_plane_cleanup, + .reset = drm_atomic_helper_plane_reset, + .atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_plane_destroy_state, + DRM_GEM_SHADOW_PLANE_FUNCS, +}; + +static const struct drm_plane_helper_funcs yhgch_plane_helper_funcs = { + DRM_GEM_SHADOW_PLANE_HELPER_FUNCS, + .atomic_check = yhgch_plane_atomic_check, + .atomic_update = yhgch_plane_atomic_update, +}; + +static void yhgch_crtc_dpms(struct drm_crtc *crtc, u32 dpms) +{ + struct yhgch_drm_private *priv = to_yhgch_drm_private(crtc->dev); + u32 reg; + + reg = readl(priv->mmio + YHGCH_CRT_DISP_CTL); + reg &= ~YHGCH_CRT_DISP_CTL_DPMS_MASK; + reg |= FIELD_PREP(YHGCH_CRT_DISP_CTL_DPMS_MASK, dpms); + reg &= ~YHGCH_CRT_DISP_CTL_TIMING_MASK; + if (dpms == YHGCH_CRT_DPMS_ON) + reg |= YHGCH_CRT_DISP_CTL_TIMING(1); + writel(reg, priv->mmio + YHGCH_CRT_DISP_CTL); +} + +static void yhgch_crtc_atomic_enable(struct drm_crtc *crtc, + struct drm_atomic_state *old_state) +{ + u32 reg; + struct yhgch_drm_private *priv = to_yhgch_drm_private(crtc->dev); + + yhgch_set_power_mode(priv, YHGCH_PW_MODE_CTL_MODE_MODE0); + + /* Enable display power gate & LOCALMEM power gate */ + reg = readl(priv->mmio + YHGCH_CURRENT_GATE); + reg &= ~YHGCH_CURR_GATE_LOCALMEM_MASK; + reg &= ~YHGCH_CURR_GATE_DISPLAY_MASK; + reg |= YHGCH_CURR_GATE_LOCALMEM(1); + reg |= YHGCH_CURR_GATE_DISPLAY(1); + yhgch_set_current_gate(priv, reg); + yhgch_crtc_dpms(crtc, YHGCH_CRT_DPMS_ON); +} + +static void yhgch_crtc_atomic_disable(struct drm_crtc *crtc, + struct drm_atomic_state *old_state) +{ + u32 reg; + struct yhgch_drm_private *priv = to_yhgch_drm_private(crtc->dev); + + yhgch_crtc_dpms(crtc, YHGCH_CRT_DPMS_OFF); + + yhgch_set_power_mode(priv, YHGCH_PW_MODE_CTL_MODE_SLEEP); + + /* Enable display power gate & LOCALMEM power gate */ + reg = readl(priv->mmio + YHGCH_CURRENT_GATE); + reg &= ~YHGCH_CURR_GATE_LOCALMEM_MASK; + reg &= ~YHGCH_CURR_GATE_DISPLAY_MASK; + reg |= YHGCH_CURR_GATE_LOCALMEM(0); + reg |= YHGCH_CURR_GATE_DISPLAY(0); + yhgch_set_current_gate(priv, reg); +} + +static enum drm_mode_status +yhgch_crtc_mode_valid(struct drm_crtc *crtc, + const struct drm_display_mode *mode) +{ + size_t i = 0; + int vrefresh = drm_mode_vrefresh(mode); + + if (vrefresh < 59 || vrefresh > 61) + return MODE_NOCLOCK; + + for (i = 0; i < ARRAY_SIZE(yhgch_pll_table); i++) { + if (yhgch_pll_table[i].hdisplay == mode->hdisplay && + yhgch_pll_table[i].vdisplay == mode->vdisplay) + return MODE_OK; + } + + return MODE_BAD; +} + +static void set_vclock_yhgch(struct drm_device *dev, u64 pll) +{ + u32 val; + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); + + val = readl(priv->mmio + CRT_PLL1_NS); + val &= ~(CRT_PLL1_NS_OUTER_BYPASS(1)); + writel(val, priv->mmio + CRT_PLL1_NS); + + val = CRT_PLL1_NS_INTER_BYPASS(1) | CRT_PLL1_NS_POWERON(1); + writel(val, priv->mmio + CRT_PLL1_NS); + + writel(pll, priv->mmio + CRT_PLL1_NS); + + usleep_range(1000, 2000); + + val = pll & ~(CRT_PLL1_NS_POWERON(1)); + writel(val, priv->mmio + CRT_PLL1_NS); + + usleep_range(1000, 2000); + + val &= ~(CRT_PLL1_NS_INTER_BYPASS(1)); + writel(val, priv->mmio + CRT_PLL1_NS); + + usleep_range(1000, 2000); + + val |= CRT_PLL1_NS_OUTER_BYPASS(1); + writel(val, priv->mmio + CRT_PLL1_NS); +} + +static void get_pll_config(u64 x, u64 y, u32 *pll1, u32 *pll2) +{ + size_t i; + size_t count = ARRAY_SIZE(yhgch_pll_table); + + for (i = 0; i < count; i++) { + if (yhgch_pll_table[i].hdisplay == x && + yhgch_pll_table[i].vdisplay == y) { + *pll1 = yhgch_pll_table[i].pll1_config_value; + *pll2 = yhgch_pll_table[i].pll2_config_value; + return; + } + } + + /* if found none, we use default value */ + *pll1 = CRT_PLL1_NS_25MHZ; + *pll2 = CRT_PLL2_NS_25MHZ; +} + +/* + * This function takes care the extra registers and bit fields required to + * setup a mode in board. + * Explanation about Display Control register: + * FPGA only supports 7 predefined pixel clocks, and clock select is + * in bit 4:0 of new register 0x802a8. + */ +static u32 display_ctrl_adjust(struct drm_device *dev, + struct drm_display_mode *mode, + u32 ctrl) +{ + u64 w, h; + u32 pll1; /* bit[31:0] of PLL */ + u32 pll2; /* bit[63:32] of PLL */ + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); + + w = mode->hdisplay; + h = mode->vdisplay; + + get_pll_config(w, h, &pll1, &pll2); + writel(pll2, priv->mmio + CRT_PLL2_NS); + set_vclock_yhgch(dev, pll1); + + /* + * yhgch has to set up the top-left and bottom-right + * registers as well. + * Note that normal chip only use those two register for + * auto-centering mode. + */ + writel(FIELD_PREP(YHGCH_CRT_AUTO_CENTERING_TL_TOP_MASK, 0) | + FIELD_PREP(YHGCH_CRT_AUTO_CENTERING_TL_LEFT_MASK, 0), + priv->mmio + YHGCH_CRT_AUTO_CENTERING_TL); + + writel(FIELD_PREP(YHGCH_CRT_AUTO_CENTERING_BR_BOTTOM_MASK, h - 1) | + FIELD_PREP(YHGCH_CRT_AUTO_CENTERING_BR_RIGHT_MASK, w - 1), + priv->mmio + YHGCH_CRT_AUTO_CENTERING_BR); + + /* + * Assume common fields in ctrl have been properly set before + * calling this function. + * This function only sets the extra fields in ctrl. + */ + + /* Set bit 25 of display controller: Select CRT or VGA clock */ + ctrl &= ~YHGCH_CRT_DISP_CTL_CRTSELECT_MASK; + ctrl &= ~YHGCH_CRT_DISP_CTL_CLOCK_PHASE_MASK; + + ctrl |= YHGCH_CRT_DISP_CTL_CRTSELECT(YHGCH_CRTSELECT_CRT); + + /* clock_phase_polarity is 0 */ + ctrl |= YHGCH_CRT_DISP_CTL_CLOCK_PHASE(0); + ctrl |= FIELD_PREP(YHGCH_CRT_DISP_CTL_FORMAT_MASK, 2); + + writel(ctrl, priv->mmio + YHGCH_CRT_DISP_CTL); + + return ctrl; +} + +static void yhgch_crtc_mode_set_nofb(struct drm_crtc *crtc) +{ + u32 val; + struct drm_display_mode *mode = &crtc->state->mode; + struct drm_device *dev = crtc->dev; + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); + u32 width = mode->hsync_end - mode->hsync_start; + u32 height = mode->vsync_end - mode->vsync_start; + + //writel(format_pll_reg(), priv->mmio + YHGCH_CRT_PLL_CTRL); + writel(FIELD_PREP(YHGCH_CRT_HORZ_TOTAL_TOTAL_MASK, mode->htotal - 1) | + FIELD_PREP(YHGCH_CRT_HORZ_TOTAL_DISP_END_MASK, mode->hdisplay - 1), + priv->mmio + YHGCH_CRT_HORZ_TOTAL); + + writel(FIELD_PREP(YHGCH_CRT_HORZ_SYNC_WIDTH_MASK, width) | + FIELD_PREP(YHGCH_CRT_HORZ_SYNC_START_MASK, mode->hsync_start - 1), + priv->mmio + YHGCH_CRT_HORZ_SYNC); + + writel(FIELD_PREP(YHGCH_CRT_VERT_TOTAL_TOTAL_MASK, mode->vtotal - 1) | + FIELD_PREP(YHGCH_CRT_VERT_TOTAL_DISP_END_MASK, mode->vdisplay - 1), + priv->mmio + YHGCH_CRT_VERT_TOTAL); + + writel(FIELD_PREP(YHGCH_CRT_VERT_SYNC_HEIGHT_MASK, height) | + FIELD_PREP(YHGCH_CRT_VERT_SYNC_START_MASK, mode->vsync_start - 1), + priv->mmio + YHGCH_CRT_VERT_SYNC); + + val = FIELD_PREP(YHGCH_CRT_DISP_CTL_VSYNC_PHASE_MASK, 0); + val |= FIELD_PREP(YHGCH_CRT_DISP_CTL_HSYNC_PHASE_MASK, 0); + val |= YHGCH_CRT_DISP_CTL_TIMING(1); + val |= YHGCH_CRT_DISP_CTL_PLANE(1); + + display_ctrl_adjust(dev, mode, val); +} + +static void yhgch_crtc_atomic_begin(struct drm_crtc *crtc, + struct drm_atomic_state *old_state) +{ + u32 reg; + struct drm_device *dev = crtc->dev; + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); + + yhgch_set_power_mode(priv, YHGCH_PW_MODE_CTL_MODE_MODE0); + + /* Enable display power gate & LOCALMEM power gate */ + reg = readl(priv->mmio + YHGCH_CURRENT_GATE); + reg &= ~YHGCH_CURR_GATE_DISPLAY_MASK; + reg &= ~YHGCH_CURR_GATE_LOCALMEM_MASK; + reg |= YHGCH_CURR_GATE_DISPLAY(1); + reg |= YHGCH_CURR_GATE_LOCALMEM(1); + yhgch_set_current_gate(priv, reg); + + /* We can add more initialization as needed. */ +} + +static const struct drm_crtc_funcs yhgch_crtc_funcs = { + .page_flip = drm_atomic_helper_page_flip, + .set_config = drm_atomic_helper_set_config, + .destroy = drm_crtc_cleanup, + .reset = drm_atomic_helper_crtc_reset, + .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state, + +}; + +static const struct drm_crtc_helper_funcs yhgch_crtc_helper_funcs = { + .mode_set_nofb = yhgch_crtc_mode_set_nofb, + .atomic_begin = yhgch_crtc_atomic_begin, + .atomic_enable = yhgch_crtc_atomic_enable, + .atomic_disable = yhgch_crtc_atomic_disable, + .mode_valid = yhgch_crtc_mode_valid, +}; + +int yhgch_de_init(struct yhgch_drm_private *priv) +{ + struct drm_device *dev = &priv->dev; + struct drm_crtc *crtc = &priv->crtc; + struct drm_plane *plane = &priv->primary_plane; + int ret; + + ret = drm_universal_plane_init(dev, plane, 1, &yhgch_plane_funcs, + channel_formats1, + ARRAY_SIZE(channel_formats1), + NULL, + DRM_PLANE_TYPE_PRIMARY, + NULL); + if (ret) { + drm_err(dev, "failed to init plane: %d\n", ret); + return ret; + } + + drm_plane_helper_add(plane, &yhgch_plane_helper_funcs); + drm_plane_enable_fb_damage_clips(plane); + + ret = drm_crtc_init_with_planes(dev, crtc, plane, + NULL, &yhgch_crtc_funcs, NULL); + if (ret) { + drm_err(dev, "failed to init crtc: %d\n", ret); + return ret; + } + + drm_crtc_helper_add(crtc, &yhgch_crtc_helper_funcs); + + return 0; +} diff --git a/drivers/gpu/drm/yhgch/yhgch_drm_drv.c b/drivers/gpu/drm/yhgch/yhgch_drm_drv.c new file mode 100644 index 000000000000..2d7588ab8e2c --- /dev/null +++ b/drivers/gpu/drm/yhgch/yhgch_drm_drv.c @@ -0,0 +1,310 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/bitfield.h> + +#include <linux/aperture.h> +#include <drm/clients/drm_client_setup.h> + +#include <drm/drm_atomic_helper.h> +#include <drm/drm_drv.h> +#include <drm/drm_fbdev_ttm.h> + +#include <drm/drm_gem_framebuffer_helper.h> +#include <drm/drm_fbdev_shmem.h> +#include <drm/drm_gem_shmem_helper.h> +#include <drm/drm_managed.h> +#include <drm/drm_module.h> +#include <drm/drm_vblank.h> + +#include <drm/drm_probe_helper.h> + +#include "yhgch_drm_drv.h" +#include "yhgch_drm_regs.h" + +#define MEM_SIZE_RESERVE4KVM 0x200000 + +DEFINE_DRM_GEM_FOPS(yhgch_fops); + +int yhgch_dumb_create(struct drm_file *file, struct drm_device *dev, + struct drm_mode_create_dumb *args) +{ + args->width = ALIGN(args->width, 8); + return drm_gem_shmem_dumb_create(file, dev, args); +} + +static struct drm_driver yhgch_driver = { + .driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC, + .fops = &yhgch_fops, + .name = "yhgch", + .desc = "yhgch drm driver", + .major = 3, + .minor = 1, + .dumb_create = yhgch_dumb_create, + DRM_FBDEV_SHMEM_DRIVER_OPS, +}; + +static int __maybe_unused yhgch_pm_suspend(struct device *dev) +{ + struct drm_device *drm_dev = dev_get_drvdata(dev); + + return drm_mode_config_helper_suspend(drm_dev); +} + +static int __maybe_unused yhgch_pm_resume(struct device *dev) +{ + struct drm_device *drm_dev = dev_get_drvdata(dev); + + return drm_mode_config_helper_resume(drm_dev); +} + +static const struct dev_pm_ops yhgch_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(yhgch_pm_suspend, + yhgch_pm_resume) +}; + +static const struct drm_mode_config_funcs yhgch_mode_funcs = { + .atomic_check = drm_atomic_helper_check, + .atomic_commit = drm_atomic_helper_commit, + .fb_create = drm_gem_fb_create_with_dirty, +}; + +static int yhgch_kms_init(struct yhgch_drm_private *priv) +{ + struct drm_device *dev = &priv->dev; + int ret; + + ret = drmm_mode_config_init(dev); + if (ret) + return ret; + + dev->mode_config.min_width = 0; + dev->mode_config.min_height = 0; + dev->mode_config.max_width = 1920; + dev->mode_config.max_height = 1200; + dev->mode_config.preferred_depth = 24; + dev->mode_config.prefer_shadow = 1; + dev->mode_config.funcs = &yhgch_mode_funcs; + + ret = yhgch_de_init(priv); + if (ret) { + drm_err(dev, "failed to init de: %d\n", ret); + return ret; + } + + ret = yhgch_vdac_init(priv); + if (ret) { + drm_err(dev, "failed to init vdac: %d\n", ret); + return ret; + } + drm_kms_helper_poll_init(dev); + + return 0; +} + +/* + * It can operate in one of three modes: 0, 1 or Sleep. + */ +void yhgch_set_power_mode(struct yhgch_drm_private *priv, u32 power_mode) +{ + unsigned int control_value = 0; + void __iomem *mmio = priv->mmio; + u32 input = 1; + + if (power_mode > YHGCH_PW_MODE_CTL_MODE_SLEEP) + return; + + if (power_mode == YHGCH_PW_MODE_CTL_MODE_SLEEP) + input = 0; + + control_value = readl(mmio + YHGCH_POWER_MODE_CTRL); + control_value &= ~(YHGCH_PW_MODE_CTL_MODE_MASK | + YHGCH_PW_MODE_CTL_OSC_INPUT_MASK); + control_value |= FIELD_PREP(YHGCH_PW_MODE_CTL_MODE_MASK, power_mode); + control_value |= FIELD_PREP(YHGCH_PW_MODE_CTL_OSC_INPUT_MASK, input); + writel(control_value, mmio + YHGCH_POWER_MODE_CTRL); +} + +void yhgch_set_current_gate(struct yhgch_drm_private *priv, unsigned int gate) +{ + u32 gate_reg; + u32 mode; + void __iomem *mmio = priv->mmio; + + /* Get current power mode. */ + mode = (readl(mmio + YHGCH_POWER_MODE_CTRL) & + YHGCH_PW_MODE_CTL_MODE_MASK) >> YHGCH_PW_MODE_CTL_MODE_SHIFT; + + switch (mode) { + case YHGCH_PW_MODE_CTL_MODE_MODE0: + gate_reg = YHGCH_MODE0_GATE; + break; + + case YHGCH_PW_MODE_CTL_MODE_MODE1: + gate_reg = YHGCH_MODE1_GATE; + break; + + default: + gate_reg = YHGCH_MODE0_GATE; + break; + } + writel(gate, mmio + gate_reg); +} + +static void yhgch_hw_config(struct yhgch_drm_private *priv) +{ + u32 reg; + + /* On hardware reset, power mode 0 is default. */ + yhgch_set_power_mode(priv, YHGCH_PW_MODE_CTL_MODE_MODE0); + + /* Enable display power gate & LOCALMEM power gate */ + reg = readl(priv->mmio + YHGCH_CURRENT_GATE); + reg &= ~YHGCH_CURR_GATE_DISPLAY_MASK; + reg &= ~YHGCH_CURR_GATE_LOCALMEM_MASK; + reg |= YHGCH_CURR_GATE_DISPLAY(1); + reg |= YHGCH_CURR_GATE_LOCALMEM(1); + + yhgch_set_current_gate(priv, reg); + + /* + * Reset the memory controller. If the memory controller + * is not reset in chip,the system might hang when sw accesses + * the memory.The memory should be resetted after + * changing the MXCLK. + */ + reg = readl(priv->mmio + YHGCH_MISC_CTRL); + reg &= ~YHGCH_MSCCTL_LOCALMEM_RESET_MASK; + reg |= YHGCH_MSCCTL_LOCALMEM_RESET(0); + writel(reg, priv->mmio + YHGCH_MISC_CTRL); + + reg &= ~YHGCH_MSCCTL_LOCALMEM_RESET_MASK; + reg |= YHGCH_MSCCTL_LOCALMEM_RESET(1); + + writel(reg, priv->mmio + YHGCH_MISC_CTRL); +} + +static int yhgch_hw_map(struct yhgch_drm_private *priv) +{ + struct drm_device *dev = &priv->dev; + struct pci_dev *pdev = to_pci_dev(dev->dev); + resource_size_t ioaddr, iosize; + + ioaddr = pci_resource_start(pdev, 1); + iosize = pci_resource_len(pdev, 1); + priv->mmio = devm_ioremap(dev->dev, ioaddr, iosize); + if (!priv->mmio) { + drm_err(dev, "Cannot map mmio region\n"); + return -ENOMEM; + } + + ioaddr = pci_resource_start(pdev, 0); + iosize = pci_resource_len(pdev, 0); + priv->vram_base = devm_ioremap_wc(dev->dev, ioaddr, iosize); + if (!priv->vram_base) { + drm_err(dev, "Cannot map vram region\n"); + return -ENOMEM; + } + return 0; +} + +static int yhgch_hw_init(struct yhgch_drm_private *priv) +{ + int ret; + + ret = yhgch_hw_map(priv); + if (ret) + return ret; + yhgch_hw_config(priv); + return 0; +} + +static int yhgch_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct yhgch_drm_private *priv; + struct drm_device *dev; + int ret; + + ret = aperture_remove_conflicting_pci_devices(pdev, yhgch_driver.name); + + if (ret) + return ret; + + priv = devm_drm_dev_alloc(&pdev->dev, &yhgch_driver, + struct yhgch_drm_private, dev); + + if (IS_ERR(priv)) + return PTR_ERR(priv); + + dev = &priv->dev; + pci_set_drvdata(pdev, dev); + + ret = pcim_enable_device(pdev); + if (ret) { + drm_err(dev, "failed to enable pci device: %d\n", ret); + goto err_return; + } + + ret = yhgch_hw_init(priv); + if (ret) + goto err_return; + + ret = yhgch_kms_init(priv); + if (ret) + goto err_return; + + ret = pci_enable_msi(pdev); + if (ret) + drm_warn(dev, "enabling MSI failed: %d\n", ret); + /* reset all the states of crtc/plane/encoder/connector */ + drm_mode_config_reset(dev); + + ret = drm_dev_register(dev, 0); + if (ret) { + drm_err(dev, "failed to register drv for userspace access: %d\n", + ret); + goto err_return; + } + drm_client_setup(dev, NULL); + + return 0; + +err_return: + return ret; +} + +static void yhgch_pci_remove(struct pci_dev *pdev) +{ + struct drm_device *dev = pci_get_drvdata(pdev); + + drm_dev_unregister(dev); + drm_dev_put(dev); +} + +static void yhgch_pci_shutdown(struct pci_dev *pdev) +{ + drm_atomic_helper_shutdown(pci_get_drvdata(pdev)); +} + +static struct pci_device_id yhgch_pci_table[] = { + { 0x1bd4, 0x0750, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { 0, } +}; + +static struct pci_driver yhgch_pci_driver = { + .name = "yhgch-drm", + .id_table = yhgch_pci_table, + .probe = yhgch_pci_probe, + .remove = yhgch_pci_remove, + .shutdown = yhgch_pci_shutdown, + .driver.pm = &yhgch_pm_ops, +}; + +drm_module_pci_driver(yhgch_pci_driver); + +MODULE_DEVICE_TABLE(pci, yhgch_pci_table); +MODULE_AUTHOR("Chu Guangqing <chuguangqing@inspur.com>"); +MODULE_DESCRIPTION("DRM Driver for YhgchBMC"); +MODULE_LICENSE("GPL"); +MODULE_VERSION("3.1"); diff --git a/drivers/gpu/drm/yhgch/yhgch_drm_drv.h b/drivers/gpu/drm/yhgch/yhgch_drm_drv.h new file mode 100644 index 000000000000..1b8b1e5b0a43 --- /dev/null +++ b/drivers/gpu/drm/yhgch/yhgch_drm_drv.h @@ -0,0 +1,51 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef YHGCH_DRM_DRV_H +#define YHGCH_DRM_DRV_H + +#include <linux/gpio/consumer.h> +#include <linux/i2c-algo-bit.h> +#include <linux/i2c.h> +#include <linux/version.h> +#include <linux/bitfield.h> +#include <drm/drm_framebuffer.h> +#include <drm/drm_encoder.h> + +struct yhgch_ddc { + struct yhgch_drm_private *priv; + struct i2c_adapter adapter; + struct i2c_algo_bit_data bit_data; +}; + +struct yhgch_drm_private { + /* hw */ + void __iomem *mmio; + void __iomem *vram_base; + + /* drm */ + struct drm_device dev; + struct drm_plane primary_plane; + struct drm_crtc crtc; + struct drm_encoder encoder; + struct drm_connector connector; +}; + +static inline struct yhgch_drm_private *to_yhgch_drm_private(struct drm_device *dev) +{ + return container_of(dev, struct yhgch_drm_private, dev); +} + +void yhgch_set_power_mode(struct yhgch_drm_private *priv, + u32 power_mode); +void yhgch_set_current_gate(struct yhgch_drm_private *priv, + u32 gate); + +int yhgch_de_init(struct yhgch_drm_private *priv); +int yhgch_vdac_init(struct yhgch_drm_private *priv); +int yhgch_mm_init(struct yhgch_drm_private *yhgch); +struct i2c_adapter *yhgch_ddc_create(struct yhgch_drm_private *priv); + +int yhgch_dumb_create(struct drm_file *file, struct drm_device *dev, + struct drm_mode_create_dumb *args); + +#endif diff --git a/drivers/gpu/drm/yhgch/yhgch_drm_i2c.c b/drivers/gpu/drm/yhgch/yhgch_drm_i2c.c new file mode 100644 index 000000000000..7bbe9a0540d4 --- /dev/null +++ b/drivers/gpu/drm/yhgch/yhgch_drm_i2c.c @@ -0,0 +1,114 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include <linux/delay.h> +#include <linux/pci.h> + +#include <drm/drm_atomic_helper.h> +#include <drm/drm_probe_helper.h> + +#include <drm/drm_managed.h> + +#include "yhgch_drm_drv.h" + +#define GPIO_DATA 0x0802A0 +#define GPIO_DATA_DIRECTION 0x0802A4 + +#define I2C_SCL_MASK BIT(0) +#define I2C_SDA_MASK BIT(1) + +static void yhgch_set_i2c_signal(void *data, u32 mask, int value) +{ + struct yhgch_ddc *ddc = data; + struct yhgch_drm_private *priv = ddc->priv; + u32 tmp_dir = readl(priv->mmio + GPIO_DATA_DIRECTION); + + if (value) { + tmp_dir &= ~mask; + writel(tmp_dir, priv->mmio + GPIO_DATA_DIRECTION); + } else { + u32 tmp_data = readl(priv->mmio + GPIO_DATA); + + tmp_data &= ~mask; + writel(tmp_data, priv->mmio + GPIO_DATA); + + tmp_dir |= mask; + writel(tmp_dir, priv->mmio + GPIO_DATA_DIRECTION); + } +} + +static int yhgch_get_i2c_signal(void *data, u32 mask) +{ + struct yhgch_ddc *ddc = data; + struct yhgch_drm_private *priv = ddc->priv; + u32 tmp_dir = readl(priv->mmio + GPIO_DATA_DIRECTION); + + if ((tmp_dir & mask) != mask) { + tmp_dir &= ~mask; + writel(tmp_dir, priv->mmio + GPIO_DATA_DIRECTION); + } + + return (readl(priv->mmio + GPIO_DATA) & mask) ? 1 : 0; +} + +static void yhgch_ddc_setsda(void *data, int state) +{ + yhgch_set_i2c_signal(data, I2C_SDA_MASK, state); +} + +static void yhgch_ddc_setscl(void *data, int state) +{ + yhgch_set_i2c_signal(data, I2C_SCL_MASK, state); +} + +static int yhgch_ddc_getsda(void *data) +{ + return yhgch_get_i2c_signal(data, I2C_SDA_MASK); +} + +static int yhgch_ddc_getscl(void *data) +{ + return yhgch_get_i2c_signal(data, I2C_SCL_MASK); +} + +static void yhgch_ddc_release(struct drm_device *dev, void *res) +{ + struct yhgch_ddc *ddc = res; + + i2c_del_adapter(&ddc->adapter); +} + +struct i2c_adapter *yhgch_ddc_create(struct yhgch_drm_private *priv) +{ + int ret = 0; + struct yhgch_ddc *ddc; + struct drm_device *dev = &priv->dev; + + ddc = drmm_kzalloc(dev, sizeof(struct yhgch_ddc), GFP_KERNEL); + if (!ddc) + return ERR_PTR(-ENOMEM); + + ddc->adapter.owner = THIS_MODULE; + ddc->priv = priv; + snprintf(ddc->adapter.name, I2C_NAME_SIZE, "INS i2c bit bus"); + ddc->adapter.dev.parent = priv->dev.dev; + i2c_set_adapdata(&ddc->adapter, ddc); + ddc->adapter.algo_data = &ddc->bit_data; + + ddc->bit_data.udelay = 20; + ddc->bit_data.timeout = usecs_to_jiffies(2000); + ddc->bit_data.data = ddc; + ddc->bit_data.setsda = yhgch_ddc_setsda; + ddc->bit_data.setscl = yhgch_ddc_setscl; + ddc->bit_data.getsda = yhgch_ddc_getsda; + ddc->bit_data.getscl = yhgch_ddc_getscl; + + ret = i2c_bit_add_bus(&ddc->adapter); + if (ret) + return ERR_PTR(ret); + + ret = drmm_add_action_or_reset(&priv->dev, yhgch_ddc_release, ddc); + if (ret) + return ERR_PTR(ret); + + return &ddc->adapter; +} diff --git a/drivers/gpu/drm/yhgch/yhgch_drm_regs.h b/drivers/gpu/drm/yhgch/yhgch_drm_regs.h new file mode 100644 index 000000000000..cecb6173a445 --- /dev/null +++ b/drivers/gpu/drm/yhgch/yhgch_drm_regs.h @@ -0,0 +1,208 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef YHGCH_DRM_HW_H +#define YHGCH_DRM_HW_H + +/* register definition */ +#define YHGCH_MISC_CTRL 0x4 + +#define YHGCH_MSCCTL_LOCALMEM_RESET(x) ((x) << 6) +#define YHGCH_MSCCTL_LOCALMEM_RESET_MASK 0x40 + +#define YHGCH_CURRENT_GATE 0x000040 +#define YHGCH_CURR_GATE_DISPLAY(x) ((x) << 2) +#define YHGCH_CURR_GATE_DISPLAY_MASK 0x4 + +#define YHGCH_CURR_GATE_LOCALMEM(x) ((x) << 1) +#define YHGCH_CURR_GATE_LOCALMEM_MASK 0x2 + +#define YHGCH_MODE0_GATE 0x000044 +#define YHGCH_MODE1_GATE 0x000048 +#define YHGCH_POWER_MODE_CTRL 0x00004C + +#define YHGCH_PW_MODE_CTL_OSC_INPUT(x) ((x) << 3) +#define YHGCH_PW_MODE_CTL_OSC_INPUT_MASK 0x8 + +#define YHGCH_PW_MODE_CTL_MODE(x) ((x) << 0) +#define YHGCH_PW_MODE_CTL_MODE_MASK 0x03 +#define YHGCH_PW_MODE_CTL_MODE_SHIFT 0 + +#define YHGCH_PW_MODE_CTL_MODE_MODE0 0 +#define YHGCH_PW_MODE_CTL_MODE_MODE1 1 +#define YHGCH_PW_MODE_CTL_MODE_SLEEP 2 + +//#define YHGCH_CRT_PLL_CTRL 0x000060 + +#define YHGCH_PLL_CTRL_BYPASS(x) ((x) << 18) +#define YHGCH_PLL_CTRL_BYPASS_MASK 0x40000 + +#define YHGCH_PLL_CTRL_POWER(x) ((x) << 17) +#define YHGCH_PLL_CTRL_POWER_MASK 0x20000 + +#define YHGCH_PLL_CTRL_INPUT(x) ((x) << 16) +#define YHGCH_PLL_CTRL_INPUT_MASK 0x10000 + +#define YHGCH_PLL_CTRL_POD(x) ((x) << 14) +#define YHGCH_PLL_CTRL_POD_MASK 0xC000 + +#define YHGCH_PLL_CTRL_OD(x) ((x) << 12) +#define YHGCH_PLL_CTRL_OD_MASK 0x3000 + +#define YHGCH_PLL_CTRL_N(x) ((x) << 8) +#define YHGCH_PLL_CTRL_N_MASK 0xF00 + +#define YHGCH_PLL_CTRL_M(x) ((x) << 0) +#define YHGCH_PLL_CTRL_M_MASK 0xFF + +#define YHGCH_CRT_DISP_CTL 0x80200 + +#define YHGCH_CRT_DISP_CTL_DPMS(x) ((x) << 30) +#define YHGCH_CRT_DISP_CTL_DPMS_MASK 0xc0000000 + +#define YHGCH_CRT_DPMS_ON 0 +#define YHGCH_CRT_DPMS_OFF 3 + +#define YHGCH_CRT_DISP_CTL_CRTSELECT(x) ((x) << 25) +#define YHGCH_CRT_DISP_CTL_CRTSELECT_MASK 0x2000000 + +#define YHGCH_CRTSELECT_CRT 1 + +#define YHGCH_CRT_DISP_CTL_CLOCK_PHASE(x) ((x) << 14) +#define YHGCH_CRT_DISP_CTL_CLOCK_PHASE_MASK 0x4000 + +#define YHGCH_CRT_DISP_CTL_VSYNC_PHASE(x) ((x) << 13) +#define YHGCH_CRT_DISP_CTL_VSYNC_PHASE_MASK 0x2000 + +#define YHGCH_CRT_DISP_CTL_HSYNC_PHASE(x) ((x) << 12) +#define YHGCH_CRT_DISP_CTL_HSYNC_PHASE_MASK 0x1000 + +#define YHGCH_CRT_DISP_CTL_TIMING(x) ((x) << 8) +#define YHGCH_CRT_DISP_CTL_TIMING_MASK 0x100 + +#define YHGCH_CRT_DISP_CTL_PLANE(x) ((x) << 2) +#define YHGCH_CRT_DISP_CTL_PLANE_MASK 4 + +#define YHGCH_CRT_DISP_CTL_FORMAT(x) ((x) << 0) +#define YHGCH_CRT_DISP_CTL_FORMAT_MASK 0x03 + +#define YHGCH_CRT_FB_ADDRESS 0x080204 + +#define YHGCH_CRT_FB_WIDTH 0x080208 +#define YHGCH_CRT_FB_WIDTH_WIDTH(x) ((x) << 16) +#define YHGCH_CRT_FB_WIDTH_WIDTH_MASK 0x3FFF0000 +#define YHGCH_CRT_FB_WIDTH_OFFS(x) ((x) << 0) +#define YHGCH_CRT_FB_WIDTH_OFFS_MASK 0x3FFF + +#define YHGCH_CRT_HORZ_TOTAL 0x08020C +#define YHGCH_CRT_HORZ_TOTAL_TOTAL(x) ((x) << 16) +#define YHGCH_CRT_HORZ_TOTAL_TOTAL_MASK 0xFFF0000 + +#define YHGCH_CRT_HORZ_TOTAL_DISP_END(x) ((x) << 0) +#define YHGCH_CRT_HORZ_TOTAL_DISP_END_MASK 0xFFF + +#define YHGCH_CRT_HORZ_SYNC 0x080210 +#define YHGCH_CRT_HORZ_SYNC_WIDTH(x) ((x) << 16) +#define YHGCH_CRT_HORZ_SYNC_WIDTH_MASK 0xFF0000 + +#define YHGCH_CRT_HORZ_SYNC_START(x) ((x) << 0) +#define YHGCH_CRT_HORZ_SYNC_START_MASK 0xFFF + +#define YHGCH_CRT_VERT_TOTAL 0x080214 +#define YHGCH_CRT_VERT_TOTAL_TOTAL(x) ((x) << 16) +#define YHGCH_CRT_VERT_TOTAL_TOTAL_MASK 0x7FFF0000 + +#define YHGCH_CRT_VERT_TOTAL_DISP_END(x) ((x) << 0) +#define YHGCH_CRT_VERT_TOTAL_DISP_END_MASK 0x7FF + +#define YHGCH_CRT_VERT_SYNC 0x080218 +#define YHGCH_CRT_VERT_SYNC_HEIGHT(x) ((x) << 16) +#define YHGCH_CRT_VERT_SYNC_HEIGHT_MASK 0x3F0000 + +#define YHGCH_CRT_VERT_SYNC_START(x) ((x) << 0) +#define YHGCH_CRT_VERT_SYNC_START_MASK 0x7FF + +/* Hardware Cursor */ +#define YHGCH_HWC_ADDRESS 0x080230 +#define YHGCH_HWC_ADDRESS_ENABLE(x) ((x) << 31) +#define YHGCH_HWC_ADDRESS_ENABLE_MASK 0x80000000 +#define YHGCH_HWC_ADDRESS_ADDRESS(x) ((x) << 0) +#define YHGCH_HWC_ADDRESS_ADDRESS_MASK 0xFFFFFFF + +#define YHGCH_HWC_LOCATION 0x080234 +#define YHGCH_HWC_LOCATION_TOP(x) ((x) << 27) +#define YHGCH_HWC_LOCATION_TOP_MASK 0x8000000 +#define YHGCH_HWC_LOCATION_Y(x) ((x) << 16) +#define YHGCH_HWC_LOCATION_Y_MASK 0x7FF0000 +#define YHGCH_HWC_LOCATION_LEFT(x) ((x) << 11) +#define YHGCH_HWC_LOCATION_LEFT_MASK 0x800 +#define YHGCH_HWC_LOCATION_X(x) ((x) << 0) +#define YHGCH_HWC_LOCATION_X_MASK 0x7FF + +#define YHGCH_HWC_COLOR_12 0x080238 +#define YHGCH_HWC_COLOR_12_2_RGB(x) ((x) << 16) +#define YHGCH_HWC_COLOR_12_2_RGB_MASK 0xFFFF0000 +#define YHGCH_HWC_COLOR_12_1_RGB(x) ((x) << 0) +#define YHGCH_HWC_COLOR_12_1_RGB_MASK 0xFFFF + +#define YHGCH_HWC_COLOR_3 0x08023C +#define YHGCH_HWC_COLOR_3_RGB(x) ((x) << 0) +#define YHGCH_HWC_COLOR_3_RGB_MASK 0xFFFF + +/* Auto Centering */ +#define YHGCH_CRT_AUTO_CENTERING_TL 0x080280 +#define YHGCH_CRT_AUTO_CENTERING_TL_TOP(x) ((x) << 16) +#define YHGCH_CRT_AUTO_CENTERING_TL_TOP_MASK 0x7FF0000 + +#define YHGCH_CRT_AUTO_CENTERING_TL_LEFT(x) ((x) << 0) +#define YHGCH_CRT_AUTO_CENTERING_TL_LEFT_MASK 0x7FF + +#define YHGCH_CRT_AUTO_CENTERING_BR 0x080284 +#define YHGCH_CRT_AUTO_CENTERING_BR_BOTTOM(x) ((x) << 16) +#define YHGCH_CRT_AUTO_CENTERING_BR_BOTTOM_MASK 0x7FF0000 + +#define YHGCH_CRT_AUTO_CENTERING_BR_RIGHT(x) ((x) << 0) +#define YHGCH_CRT_AUTO_CENTERING_BR_RIGHT_MASK 0x7FF + +/* register to control panel output */ +#define YHGCH_DISPLAY_CONTROL_HISILE 0x80288 +#define YHGCH_DISPLAY_CONTROL_FPVDDEN(x) ((x) << 0) +#define YHGCH_DISPLAY_CONTROL_PANELDATE(x) ((x) << 1) +#define YHGCH_DISPLAY_CONTROL_FPEN(x) ((x) << 2) +#define YHGCH_DISPLAY_CONTROL_VBIASEN(x) ((x) << 3) + +#define YHGCH_RAW_INTERRUPT 0x80290 +#define YHGCH_RAW_INTERRUPT_VBLANK(x) ((x) << 2) +#define YHGCH_RAW_INTERRUPT_VBLANK_MASK 0x4 + +#define YHGCH_RAW_INTERRUPT_EN 0x80298 +#define YHGCH_RAW_INTERRUPT_EN_VBLANK(x) ((x) << 2) +#define YHGCH_RAW_INTERRUPT_EN_VBLANK_MASK 0x4 + +/* register and values for PLL control */ +#define CRT_PLL1_NS 0x802a8 +#define CRT_PLL1_NS_OUTER_BYPASS(x) ((x) << 30) +#define CRT_PLL1_NS_INTER_BYPASS(x) ((x) << 29) +#define CRT_PLL1_NS_POWERON(x) ((x) << 24) + +#define CRT_PLL1_NS_25MHZ 0x00006691 //640x480 +#define CRT_PLL1_NS_40MHZ 0x00004580 //800x600 +#define CRT_PLL1_NS_65MHZ 0x00002568 //1024x768 +#define CRT_PLL1_NS_83MHZ 0x000027bb //1280x800 +#define CRT_PLL1_NS_106MHZ 0x000027ef //1440x900 +#define CRT_PLL1_NS_108MHZ 0x000027f2 //1280x1024 +#define CRT_PLL1_NS_146MHZ 0x00001575 //1680x1050 +#define CRT_PLL1_NS_148MHZ 0x0000145f //1920x1080 +#define CRT_PLL1_NS_193MHZ 0x000018f7 //1920x1200 + +#define CRT_PLL2_NS 0x802ac +#define CRT_PLL2_NS_25MHZ 0x0 +#define CRT_PLL2_NS_40MHZ 0x0 +#define CRT_PLL2_NS_65MHZ 0x0 +#define CRT_PLL2_NS_83MHZ 0x0 +#define CRT_PLL2_NS_106MHZ 0x0 +#define CRT_PLL2_NS_108MHZ 0x0 +#define CRT_PLL2_NS_146MHZ 0x0 +#define CRT_PLL2_NS_148MHZ 0x0 +#define CRT_PLL2_NS_193MHZ 0x0 + +#endif diff --git a/drivers/gpu/drm/yhgch/yhgch_drm_vdac.c b/drivers/gpu/drm/yhgch/yhgch_drm_vdac.c new file mode 100644 index 000000000000..5f4dd8700c8a --- /dev/null +++ b/drivers/gpu/drm/yhgch/yhgch_drm_vdac.c @@ -0,0 +1,121 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <linux/io.h> + +#include <drm/drm_atomic_helper.h> +#include <drm/drm_edid.h> +#include <drm/drm_probe_helper.h> +#include <drm/drm_print.h> +#include <drm/drm_simple_kms_helper.h> + +#include "yhgch_drm_drv.h" +#include "yhgch_drm_regs.h" + +static int yhgch_connector_get_modes(struct drm_connector *connector) +{ + int count; + const struct drm_edid *drm_edid; + + if (!drm_probe_ddc(connector->ddc)) + drm_err(connector->dev, "smidebug: not find !!!\n"); + + drm_edid = drm_edid_read(connector); + if (drm_edid) { + drm_edid_connector_update(connector, drm_edid); + count = drm_edid_connector_add_modes(connector); + if (count) + goto out; + } + + count = drm_add_modes_noedid(connector, + connector->dev->mode_config.max_width, + connector->dev->mode_config.max_height); + drm_set_preferred_mode(connector, 1024, 768); + +out: + drm_edid_free(drm_edid); + return count; +} + +static int yhgch_connector_helper_detect_from_ddc(struct drm_connector *connector, + struct drm_modeset_acquire_ctx *ctx, + bool force) +{ + if (drm_connector_helper_detect_from_ddc(connector, ctx, force) + != connector_status_connected) { + drm_err(connector->dev, "smidebug: ddc detect failed, force connect\n"); + } + return connector_status_connected; +} + +static const struct drm_connector_helper_funcs + yhgch_connector_helper_funcs = { + .get_modes = yhgch_connector_get_modes, + .detect_ctx = yhgch_connector_helper_detect_from_ddc, +}; + +static const struct drm_connector_funcs yhgch_connector_funcs = { + .fill_modes = drm_helper_probe_single_connector_modes, + .destroy = drm_connector_cleanup, + .reset = drm_atomic_helper_connector_reset, + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, +}; + +static void yhgch_encoder_enable(struct drm_encoder *encoder) +{ + u32 reg; + struct drm_device *dev = encoder->dev; + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); + + reg = readl(priv->mmio + YHGCH_DISPLAY_CONTROL_HISILE); + reg |= YHGCH_DISPLAY_CONTROL_FPVDDEN(1); + reg |= YHGCH_DISPLAY_CONTROL_PANELDATE(1); + reg |= YHGCH_DISPLAY_CONTROL_FPEN(1); + reg |= YHGCH_DISPLAY_CONTROL_VBIASEN(1); + writel(reg, priv->mmio + YHGCH_DISPLAY_CONTROL_HISILE); +} + +static const struct drm_encoder_helper_funcs yhgch_encoder_helper_funcs = { + .enable = yhgch_encoder_enable, +}; + +int yhgch_vdac_init(struct yhgch_drm_private *priv) +{ + struct drm_device *dev = &priv->dev; + struct drm_encoder *encoder = &priv->encoder; + struct drm_crtc *crtc = &priv->crtc; + struct drm_connector *connector = &priv->connector; + struct i2c_adapter *ddc; + int ret; + + ddc = yhgch_ddc_create(priv); + if (IS_ERR(ddc)) { + ret = PTR_ERR(ddc); + drm_err(dev, "failed to create ddc: %d\n", ret); + return ret; + } + + encoder->possible_crtcs = drm_crtc_mask(crtc); + ret = drmm_encoder_init(dev, encoder, NULL, DRM_MODE_ENCODER_DAC, NULL); + if (ret) { + drm_err(dev, "failed to init encoder: %d\n", ret); + return ret; + } + + drm_encoder_helper_add(encoder, &yhgch_encoder_helper_funcs); + + ret = drm_connector_init_with_ddc(dev, connector, + &yhgch_connector_funcs, + DRM_MODE_CONNECTOR_VGA, + ddc); + if (ret) { + drm_err(dev, "failed to init connector: %d\n", ret); + return ret; + } + drm_connector_helper_add(connector, &yhgch_connector_helper_funcs); + + drm_connector_attach_encoder(connector, encoder); + + return 0; +} -- 2.43.5 ^ permalink raw reply related [flat|nested] 22+ messages in thread
* Re: [PATCH v5 1/1] [DRIVER] gpu: drm: add support for Yhgc ZX1000 soc chipset 2025-09-25 9:17 ` [PATCH v5 1/1] " Chu Guangqing @ 2025-09-25 22:20 ` Dmitry Baryshkov 2025-09-28 6:05 ` [PATCH v5 1/1] [DRIVER] gpu: drm: add support for Yhgc ZX1000 soc Chu Guangqing 2025-09-27 20:40 ` [PATCH v5 1/1] [DRIVER] gpu: drm: add support for Yhgc ZX1000 soc chipset kernel test robot 1 sibling, 1 reply; 22+ messages in thread From: Dmitry Baryshkov @ 2025-09-25 22:20 UTC (permalink / raw) To: Chu Guangqing Cc: tzimmermann, maarten.lankhorst, mripard, airlied, simona, linux-kernel, dri-devel On Thu, Sep 25, 2025 at 05:17:15PM +0800, Chu Guangqing wrote: > add support for Yhgc BMC soc chipset > > Signed-off-by: Chu Guangqing <chuguangqing@inspur.com> > --- > MAINTAINERS | 5 + > drivers/gpu/drm/Kconfig | 2 + > drivers/gpu/drm/Makefile | 1 + > drivers/gpu/drm/yhgch/Kconfig | 11 + > drivers/gpu/drm/yhgch/Makefile | 4 + > drivers/gpu/drm/yhgch/yhgch_drm_de.c | 415 +++++++++++++++++++++++++ > drivers/gpu/drm/yhgch/yhgch_drm_drv.c | 310 ++++++++++++++++++ > drivers/gpu/drm/yhgch/yhgch_drm_drv.h | 51 +++ > drivers/gpu/drm/yhgch/yhgch_drm_i2c.c | 114 +++++++ > drivers/gpu/drm/yhgch/yhgch_drm_regs.h | 208 +++++++++++++ > drivers/gpu/drm/yhgch/yhgch_drm_vdac.c | 121 +++++++ > 11 files changed, 1242 insertions(+) > create mode 100644 drivers/gpu/drm/yhgch/Kconfig > create mode 100644 drivers/gpu/drm/yhgch/Makefile > create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_de.c > create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_drv.c > create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_drv.h > create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_i2c.c > create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_regs.h > create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_vdac.c > > diff --git a/MAINTAINERS b/MAINTAINERS > index 10614ca41ed0..c79d9361fa81 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -27744,6 +27744,11 @@ S: Maintained > F: Documentation/input/devices/yealink.rst > F: drivers/input/misc/yealink.* > > +YHGC DRM DRIVER > +M: chuguangqing <chuguangqing@inspur.com> > +S: Maintained > +F: drivers/gpu/drm/yhgch > + > Z8530 DRIVER FOR AX.25 > M: Joerg Reuter <jreuter@yaina.de> > L: linux-hams@vger.kernel.org > diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig > index f7ea8e895c0c..8e0b1d12c81f 100644 > --- a/drivers/gpu/drm/Kconfig > +++ b/drivers/gpu/drm/Kconfig > @@ -396,6 +396,8 @@ source "drivers/gpu/drm/sprd/Kconfig" > > source "drivers/gpu/drm/imagination/Kconfig" > > +source "drivers/gpu/drm/yhgch/Kconfig" > + > config DRM_HYPERV > tristate "DRM Support for Hyper-V synthetic video device" > depends on DRM && PCI && HYPERV > diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile > index 4dafbdc8f86a..f344e0173b29 100644 > --- a/drivers/gpu/drm/Makefile > +++ b/drivers/gpu/drm/Makefile > @@ -231,6 +231,7 @@ obj-y += solomon/ > obj-$(CONFIG_DRM_SPRD) += sprd/ > obj-$(CONFIG_DRM_LOONGSON) += loongson/ > obj-$(CONFIG_DRM_POWERVR) += imagination/ > +obj-$(CONFIG_DRM_YHGCH) += yhgch/ > > # Ensure drm headers are self-contained and pass kernel-doc > hdrtest-files := \ > diff --git a/drivers/gpu/drm/yhgch/Kconfig b/drivers/gpu/drm/yhgch/Kconfig > new file mode 100644 > index 000000000000..695d29409444 > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/Kconfig > @@ -0,0 +1,11 @@ > +config DRM_YHGCH > + tristate "DRM Support for Yhgch BMC" > + depends on DRM && PCI && MMU > + select DRM_CLIENT_SELECTION > + select DRM_KMS_HELPER > + select DRM_GEM_SHMEM_HELPER > + help > + Choose this option if you have a Yhgch soc chipset. > + If M is selected the module will be called yhgch-drm. > + IF Y is selected the module will be built into the kernel. > + IF N is selected the module will be excluded from the kernel. > diff --git a/drivers/gpu/drm/yhgch/Makefile b/drivers/gpu/drm/yhgch/Makefile > new file mode 100644 > index 000000000000..30de2fd27f18 > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/Makefile > @@ -0,0 +1,4 @@ > +yhgch-drm-y := yhgch_drm_drv.o yhgch_drm_de.o yhgch_drm_vdac.o yhgch_drm_i2c.o > + > +obj-$(CONFIG_DRM_YHGCH) += yhgch-drm.o > + > diff --git a/drivers/gpu/drm/yhgch/yhgch_drm_de.c b/drivers/gpu/drm/yhgch/yhgch_drm_de.c > new file mode 100644 > index 000000000000..c2c38c3e7637 > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/yhgch_drm_de.c > @@ -0,0 +1,415 @@ > +// SPDX-License-Identifier: GPL-2.0-or-later > + > +#include <linux/delay.h> > +#include <drm/drm_atomic.h> > +#include <drm/drm_gem_atomic_helper.h> > +#include <drm/drm_atomic_helper.h> > +#include <drm/drm_gem_shmem_helper.h> > +#include <drm/drm_format_helper.h> > +#include <drm/drm_damage_helper.h> > +#include <drm/drm_fourcc.h> > + > +#include <drm/drm_vblank.h> > + > +#include "yhgch_drm_drv.h" > +#include "yhgch_drm_regs.h" > + > +struct yhgch_dislay_pll_config { > + u64 hdisplay; > + u64 vdisplay; > + u32 pll1_config_value; > + u32 pll2_config_value; > +}; > + > +static const struct yhgch_dislay_pll_config yhgch_pll_table[] = { > + { 640, 480, CRT_PLL1_NS_25MHZ, CRT_PLL2_NS_25MHZ }, > + { 800, 600, CRT_PLL1_NS_40MHZ, CRT_PLL2_NS_40MHZ }, > + { 1024, 768, CRT_PLL1_NS_65MHZ, CRT_PLL2_NS_65MHZ }, > + { 1280, 1024, CRT_PLL1_NS_108MHZ, CRT_PLL2_NS_108MHZ }, > + { 1920, 1080, CRT_PLL1_NS_148MHZ, CRT_PLL2_NS_148MHZ }, > +}; > + > +static int yhgch_plane_atomic_check(struct drm_plane *plane, > + struct drm_atomic_state *state) > +{ > + struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state, > + plane); > + struct drm_framebuffer *fb = new_plane_state->fb; > + struct drm_crtc_state *new_crtc_state = NULL; > + int ret; > + > + if (!fb) > + return 0; > + > + if (new_plane_state->crtc) > + new_crtc_state = drm_atomic_get_new_crtc_state(state, new_plane_state->crtc); > + > + ret = drm_atomic_helper_check_plane_state(new_plane_state, new_crtc_state, > + DRM_PLANE_NO_SCALING, > + DRM_PLANE_NO_SCALING, > + false, true); > + if (ret) > + return ret; > + if (!new_plane_state->visible) > + return 0; > + > + return 0; Hmm, can you simplify that to just: return drm_atomic_helper_check_plane_state(); ? > +} > + [...] > + > +static const struct drm_crtc_funcs yhgch_crtc_funcs = { > + .page_flip = drm_atomic_helper_page_flip, > + .set_config = drm_atomic_helper_set_config, > + .destroy = drm_crtc_cleanup, > + .reset = drm_atomic_helper_crtc_reset, > + .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state, > + .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state, > + Extra empty line > +}; > + > +static const struct drm_crtc_helper_funcs yhgch_crtc_helper_funcs = { > + .mode_set_nofb = yhgch_crtc_mode_set_nofb, > + .atomic_begin = yhgch_crtc_atomic_begin, > + .atomic_enable = yhgch_crtc_atomic_enable, > + .atomic_disable = yhgch_crtc_atomic_disable, > + .mode_valid = yhgch_crtc_mode_valid, > +}; > + > +int yhgch_de_init(struct yhgch_drm_private *priv) > +{ > + struct drm_device *dev = &priv->dev; > + struct drm_crtc *crtc = &priv->crtc; > + struct drm_plane *plane = &priv->primary_plane; > + int ret; > + > + ret = drm_universal_plane_init(dev, plane, 1, &yhgch_plane_funcs, > + channel_formats1, > + ARRAY_SIZE(channel_formats1), > + NULL, > + DRM_PLANE_TYPE_PRIMARY, > + NULL); > + if (ret) { > + drm_err(dev, "failed to init plane: %d\n", ret); > + return ret; > + } > + > + drm_plane_helper_add(plane, &yhgch_plane_helper_funcs); > + drm_plane_enable_fb_damage_clips(plane); > + > + ret = drm_crtc_init_with_planes(dev, crtc, plane, > + NULL, &yhgch_crtc_funcs, NULL); > + if (ret) { > + drm_err(dev, "failed to init crtc: %d\n", ret); > + return ret; > + } > + > + drm_crtc_helper_add(crtc, &yhgch_crtc_helper_funcs); > + > + return 0; > +} > diff --git a/drivers/gpu/drm/yhgch/yhgch_drm_drv.c b/drivers/gpu/drm/yhgch/yhgch_drm_drv.c > new file mode 100644 > index 000000000000..2d7588ab8e2c > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/yhgch_drm_drv.c > @@ -0,0 +1,310 @@ > +// SPDX-License-Identifier: GPL-2.0 > +#include <linux/module.h> > +#include <linux/pci.h> > +#include <linux/bitfield.h> > + > +#include <linux/aperture.h> > +#include <drm/clients/drm_client_setup.h> > + > +#include <drm/drm_atomic_helper.h> > +#include <drm/drm_drv.h> > +#include <drm/drm_fbdev_ttm.h> > + > +#include <drm/drm_gem_framebuffer_helper.h> > +#include <drm/drm_fbdev_shmem.h> > +#include <drm/drm_gem_shmem_helper.h> > +#include <drm/drm_managed.h> > +#include <drm/drm_module.h> > +#include <drm/drm_vblank.h> > + > +#include <drm/drm_probe_helper.h> > + > +#include "yhgch_drm_drv.h" > +#include "yhgch_drm_regs.h" > + > +#define MEM_SIZE_RESERVE4KVM 0x200000 > + > +DEFINE_DRM_GEM_FOPS(yhgch_fops); > + > +int yhgch_dumb_create(struct drm_file *file, struct drm_device *dev, > + struct drm_mode_create_dumb *args) > +{ > + args->width = ALIGN(args->width, 8); > + return drm_gem_shmem_dumb_create(file, dev, args); > +} > + > +static struct drm_driver yhgch_driver = { > + .driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC, > + .fops = &yhgch_fops, > + .name = "yhgch", > + .desc = "yhgch drm driver", > + .major = 3, > + .minor = 1, > + .dumb_create = yhgch_dumb_create, > + DRM_FBDEV_SHMEM_DRIVER_OPS, > +}; > + > +static int __maybe_unused yhgch_pm_suspend(struct device *dev) > +{ > + struct drm_device *drm_dev = dev_get_drvdata(dev); > + > + return drm_mode_config_helper_suspend(drm_dev); > +} > + > +static int __maybe_unused yhgch_pm_resume(struct device *dev) > +{ > + struct drm_device *drm_dev = dev_get_drvdata(dev); > + > + return drm_mode_config_helper_resume(drm_dev); > +} > + > +static const struct dev_pm_ops yhgch_pm_ops = { > + SET_SYSTEM_SLEEP_PM_OPS(yhgch_pm_suspend, > + yhgch_pm_resume) > +}; > + > +static const struct drm_mode_config_funcs yhgch_mode_funcs = { > + .atomic_check = drm_atomic_helper_check, > + .atomic_commit = drm_atomic_helper_commit, > + .fb_create = drm_gem_fb_create_with_dirty, > +}; > + > +static int yhgch_kms_init(struct yhgch_drm_private *priv) > +{ > + struct drm_device *dev = &priv->dev; > + int ret; > + > + ret = drmm_mode_config_init(dev); > + if (ret) > + return ret; > + > + dev->mode_config.min_width = 0; > + dev->mode_config.min_height = 0; > + dev->mode_config.max_width = 1920; > + dev->mode_config.max_height = 1200; > + dev->mode_config.preferred_depth = 24; > + dev->mode_config.prefer_shadow = 1; > + dev->mode_config.funcs = &yhgch_mode_funcs; > + > + ret = yhgch_de_init(priv); > + if (ret) { > + drm_err(dev, "failed to init de: %d\n", ret); > + return ret; > + } > + > + ret = yhgch_vdac_init(priv); > + if (ret) { > + drm_err(dev, "failed to init vdac: %d\n", ret); > + return ret; > + } > + drm_kms_helper_poll_init(dev); > + > + return 0; > +} > + > +/* > + * It can operate in one of three modes: 0, 1 or Sleep. > + */ > +void yhgch_set_power_mode(struct yhgch_drm_private *priv, u32 power_mode) > +{ > + unsigned int control_value = 0; > + void __iomem *mmio = priv->mmio; > + u32 input = 1; > + > + if (power_mode > YHGCH_PW_MODE_CTL_MODE_SLEEP) > + return; > + > + if (power_mode == YHGCH_PW_MODE_CTL_MODE_SLEEP) > + input = 0; > + > + control_value = readl(mmio + YHGCH_POWER_MODE_CTRL); > + control_value &= ~(YHGCH_PW_MODE_CTL_MODE_MASK | > + YHGCH_PW_MODE_CTL_OSC_INPUT_MASK); > + control_value |= FIELD_PREP(YHGCH_PW_MODE_CTL_MODE_MASK, power_mode); > + control_value |= FIELD_PREP(YHGCH_PW_MODE_CTL_OSC_INPUT_MASK, input); > + writel(control_value, mmio + YHGCH_POWER_MODE_CTRL); > +} > + > +void yhgch_set_current_gate(struct yhgch_drm_private *priv, unsigned int gate) > +{ > + u32 gate_reg; > + u32 mode; > + void __iomem *mmio = priv->mmio; > + > + /* Get current power mode. */ > + mode = (readl(mmio + YHGCH_POWER_MODE_CTRL) & > + YHGCH_PW_MODE_CTL_MODE_MASK) >> YHGCH_PW_MODE_CTL_MODE_SHIFT; > + > + switch (mode) { > + case YHGCH_PW_MODE_CTL_MODE_MODE0: > + gate_reg = YHGCH_MODE0_GATE; > + break; > + > + case YHGCH_PW_MODE_CTL_MODE_MODE1: > + gate_reg = YHGCH_MODE1_GATE; > + break; > + > + default: > + gate_reg = YHGCH_MODE0_GATE; > + break; > + } > + writel(gate, mmio + gate_reg); > +} > + > +static void yhgch_hw_config(struct yhgch_drm_private *priv) > +{ > + u32 reg; > + > + /* On hardware reset, power mode 0 is default. */ > + yhgch_set_power_mode(priv, YHGCH_PW_MODE_CTL_MODE_MODE0); > + > + /* Enable display power gate & LOCALMEM power gate */ > + reg = readl(priv->mmio + YHGCH_CURRENT_GATE); > + reg &= ~YHGCH_CURR_GATE_DISPLAY_MASK; > + reg &= ~YHGCH_CURR_GATE_LOCALMEM_MASK; > + reg |= YHGCH_CURR_GATE_DISPLAY(1); > + reg |= YHGCH_CURR_GATE_LOCALMEM(1); > + > + yhgch_set_current_gate(priv, reg); > + > + /* > + * Reset the memory controller. If the memory controller > + * is not reset in chip,the system might hang when sw accesses > + * the memory.The memory should be resetted after > + * changing the MXCLK. > + */ > + reg = readl(priv->mmio + YHGCH_MISC_CTRL); > + reg &= ~YHGCH_MSCCTL_LOCALMEM_RESET_MASK; > + reg |= YHGCH_MSCCTL_LOCALMEM_RESET(0); > + writel(reg, priv->mmio + YHGCH_MISC_CTRL); > + > + reg &= ~YHGCH_MSCCTL_LOCALMEM_RESET_MASK; > + reg |= YHGCH_MSCCTL_LOCALMEM_RESET(1); > + > + writel(reg, priv->mmio + YHGCH_MISC_CTRL); > +} > + > +static int yhgch_hw_map(struct yhgch_drm_private *priv) > +{ > + struct drm_device *dev = &priv->dev; > + struct pci_dev *pdev = to_pci_dev(dev->dev); > + resource_size_t ioaddr, iosize; > + > + ioaddr = pci_resource_start(pdev, 1); > + iosize = pci_resource_len(pdev, 1); > + priv->mmio = devm_ioremap(dev->dev, ioaddr, iosize); > + if (!priv->mmio) { > + drm_err(dev, "Cannot map mmio region\n"); > + return -ENOMEM; > + } > + > + ioaddr = pci_resource_start(pdev, 0); > + iosize = pci_resource_len(pdev, 0); > + priv->vram_base = devm_ioremap_wc(dev->dev, ioaddr, iosize); > + if (!priv->vram_base) { > + drm_err(dev, "Cannot map vram region\n"); > + return -ENOMEM; > + } > + return 0; > +} > + > +static int yhgch_hw_init(struct yhgch_drm_private *priv) > +{ > + int ret; > + > + ret = yhgch_hw_map(priv); > + if (ret) > + return ret; > + yhgch_hw_config(priv); > + return 0; > +} > + > +static int yhgch_pci_probe(struct pci_dev *pdev, > + const struct pci_device_id *ent) > +{ > + struct yhgch_drm_private *priv; > + struct drm_device *dev; > + int ret; > + > + ret = aperture_remove_conflicting_pci_devices(pdev, yhgch_driver.name); > + > + if (ret) > + return ret; > + > + priv = devm_drm_dev_alloc(&pdev->dev, &yhgch_driver, > + struct yhgch_drm_private, dev); > + > + if (IS_ERR(priv)) > + return PTR_ERR(priv); > + > + dev = &priv->dev; > + pci_set_drvdata(pdev, dev); > + > + ret = pcim_enable_device(pdev); > + if (ret) { > + drm_err(dev, "failed to enable pci device: %d\n", ret); > + goto err_return; > + } > + > + ret = yhgch_hw_init(priv); > + if (ret) > + goto err_return; > + > + ret = yhgch_kms_init(priv); > + if (ret) > + goto err_return; > + > + ret = pci_enable_msi(pdev); > + if (ret) > + drm_warn(dev, "enabling MSI failed: %d\n", ret); > + /* reset all the states of crtc/plane/encoder/connector */ > + drm_mode_config_reset(dev); > + > + ret = drm_dev_register(dev, 0); > + if (ret) { > + drm_err(dev, "failed to register drv for userspace access: %d\n", > + ret); > + goto err_return; > + } > + drm_client_setup(dev, NULL); > + > + return 0; > + > +err_return: > + return ret; > +} > + > +static void yhgch_pci_remove(struct pci_dev *pdev) > +{ > + struct drm_device *dev = pci_get_drvdata(pdev); > + > + drm_dev_unregister(dev); > + drm_dev_put(dev); > +} > + > +static void yhgch_pci_shutdown(struct pci_dev *pdev) > +{ > + drm_atomic_helper_shutdown(pci_get_drvdata(pdev)); > +} > + > +static struct pci_device_id yhgch_pci_table[] = { > + { 0x1bd4, 0x0750, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, > + { 0, } > +}; > + > +static struct pci_driver yhgch_pci_driver = { > + .name = "yhgch-drm", > + .id_table = yhgch_pci_table, > + .probe = yhgch_pci_probe, > + .remove = yhgch_pci_remove, > + .shutdown = yhgch_pci_shutdown, > + .driver.pm = &yhgch_pm_ops, > +}; > + > +drm_module_pci_driver(yhgch_pci_driver); > + > +MODULE_DEVICE_TABLE(pci, yhgch_pci_table); > +MODULE_AUTHOR("Chu Guangqing <chuguangqing@inspur.com>"); > +MODULE_DESCRIPTION("DRM Driver for YhgchBMC"); > +MODULE_LICENSE("GPL"); > +MODULE_VERSION("3.1"); > diff --git a/drivers/gpu/drm/yhgch/yhgch_drm_drv.h b/drivers/gpu/drm/yhgch/yhgch_drm_drv.h > new file mode 100644 > index 000000000000..1b8b1e5b0a43 > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/yhgch_drm_drv.h > @@ -0,0 +1,51 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > + > +#ifndef YHGCH_DRM_DRV_H > +#define YHGCH_DRM_DRV_H > + > +#include <linux/gpio/consumer.h> > +#include <linux/i2c-algo-bit.h> > +#include <linux/i2c.h> > +#include <linux/version.h> > +#include <linux/bitfield.h> > +#include <drm/drm_framebuffer.h> > +#include <drm/drm_encoder.h> > + > +struct yhgch_ddc { > + struct yhgch_drm_private *priv; > + struct i2c_adapter adapter; > + struct i2c_algo_bit_data bit_data; > +}; > + > +struct yhgch_drm_private { > + /* hw */ > + void __iomem *mmio; > + void __iomem *vram_base; > + > + /* drm */ > + struct drm_device dev; > + struct drm_plane primary_plane; > + struct drm_crtc crtc; > + struct drm_encoder encoder; > + struct drm_connector connector; > +}; > + > +static inline struct yhgch_drm_private *to_yhgch_drm_private(struct drm_device *dev) > +{ > + return container_of(dev, struct yhgch_drm_private, dev); > +} > + > +void yhgch_set_power_mode(struct yhgch_drm_private *priv, > + u32 power_mode); > +void yhgch_set_current_gate(struct yhgch_drm_private *priv, > + u32 gate); > + > +int yhgch_de_init(struct yhgch_drm_private *priv); > +int yhgch_vdac_init(struct yhgch_drm_private *priv); > +int yhgch_mm_init(struct yhgch_drm_private *yhgch); > +struct i2c_adapter *yhgch_ddc_create(struct yhgch_drm_private *priv); > + > +int yhgch_dumb_create(struct drm_file *file, struct drm_device *dev, > + struct drm_mode_create_dumb *args); > + > +#endif > diff --git a/drivers/gpu/drm/yhgch/yhgch_drm_i2c.c b/drivers/gpu/drm/yhgch/yhgch_drm_i2c.c > new file mode 100644 > index 000000000000..7bbe9a0540d4 > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/yhgch_drm_i2c.c > @@ -0,0 +1,114 @@ > +// SPDX-License-Identifier: GPL-2.0-or-later > + > +#include <linux/delay.h> > +#include <linux/pci.h> > + > +#include <drm/drm_atomic_helper.h> > +#include <drm/drm_probe_helper.h> > + > +#include <drm/drm_managed.h> > + > +#include "yhgch_drm_drv.h" > + > +#define GPIO_DATA 0x0802A0 > +#define GPIO_DATA_DIRECTION 0x0802A4 > + > +#define I2C_SCL_MASK BIT(0) > +#define I2C_SDA_MASK BIT(1) > + > +static void yhgch_set_i2c_signal(void *data, u32 mask, int value) > +{ > + struct yhgch_ddc *ddc = data; > + struct yhgch_drm_private *priv = ddc->priv; > + u32 tmp_dir = readl(priv->mmio + GPIO_DATA_DIRECTION); > + > + if (value) { > + tmp_dir &= ~mask; > + writel(tmp_dir, priv->mmio + GPIO_DATA_DIRECTION); > + } else { > + u32 tmp_data = readl(priv->mmio + GPIO_DATA); > + > + tmp_data &= ~mask; > + writel(tmp_data, priv->mmio + GPIO_DATA); > + > + tmp_dir |= mask; > + writel(tmp_dir, priv->mmio + GPIO_DATA_DIRECTION); > + } > +} > + > +static int yhgch_get_i2c_signal(void *data, u32 mask) > +{ > + struct yhgch_ddc *ddc = data; > + struct yhgch_drm_private *priv = ddc->priv; > + u32 tmp_dir = readl(priv->mmio + GPIO_DATA_DIRECTION); > + > + if ((tmp_dir & mask) != mask) { > + tmp_dir &= ~mask; > + writel(tmp_dir, priv->mmio + GPIO_DATA_DIRECTION); > + } > + > + return (readl(priv->mmio + GPIO_DATA) & mask) ? 1 : 0; > +} > + > +static void yhgch_ddc_setsda(void *data, int state) > +{ > + yhgch_set_i2c_signal(data, I2C_SDA_MASK, state); > +} > + > +static void yhgch_ddc_setscl(void *data, int state) > +{ > + yhgch_set_i2c_signal(data, I2C_SCL_MASK, state); > +} > + > +static int yhgch_ddc_getsda(void *data) > +{ > + return yhgch_get_i2c_signal(data, I2C_SDA_MASK); > +} > + > +static int yhgch_ddc_getscl(void *data) > +{ > + return yhgch_get_i2c_signal(data, I2C_SCL_MASK); > +} > + > +static void yhgch_ddc_release(struct drm_device *dev, void *res) > +{ > + struct yhgch_ddc *ddc = res; > + > + i2c_del_adapter(&ddc->adapter); > +} > + > +struct i2c_adapter *yhgch_ddc_create(struct yhgch_drm_private *priv) > +{ > + int ret = 0; > + struct yhgch_ddc *ddc; > + struct drm_device *dev = &priv->dev; > + > + ddc = drmm_kzalloc(dev, sizeof(struct yhgch_ddc), GFP_KERNEL); > + if (!ddc) > + return ERR_PTR(-ENOMEM); > + > + ddc->adapter.owner = THIS_MODULE; > + ddc->priv = priv; > + snprintf(ddc->adapter.name, I2C_NAME_SIZE, "INS i2c bit bus"); > + ddc->adapter.dev.parent = priv->dev.dev; > + i2c_set_adapdata(&ddc->adapter, ddc); > + ddc->adapter.algo_data = &ddc->bit_data; > + > + ddc->bit_data.udelay = 20; > + ddc->bit_data.timeout = usecs_to_jiffies(2000); > + ddc->bit_data.data = ddc; > + ddc->bit_data.setsda = yhgch_ddc_setsda; > + ddc->bit_data.setscl = yhgch_ddc_setscl; > + ddc->bit_data.getsda = yhgch_ddc_getsda; > + ddc->bit_data.getscl = yhgch_ddc_getscl; > + > + ret = i2c_bit_add_bus(&ddc->adapter); > + if (ret) > + return ERR_PTR(ret); > + > + ret = drmm_add_action_or_reset(&priv->dev, yhgch_ddc_release, ddc); > + if (ret) > + return ERR_PTR(ret); > + > + return &ddc->adapter; > +} > diff --git a/drivers/gpu/drm/yhgch/yhgch_drm_regs.h b/drivers/gpu/drm/yhgch/yhgch_drm_regs.h > new file mode 100644 > index 000000000000..cecb6173a445 > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/yhgch_drm_regs.h > @@ -0,0 +1,208 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > + > +#ifndef YHGCH_DRM_HW_H > +#define YHGCH_DRM_HW_H > + > +/* register definition */ > +#define YHGCH_MISC_CTRL 0x4 > + > +#define YHGCH_MSCCTL_LOCALMEM_RESET(x) ((x) << 6) > +#define YHGCH_MSCCTL_LOCALMEM_RESET_MASK 0x40 > + > +#define YHGCH_CURRENT_GATE 0x000040 > +#define YHGCH_CURR_GATE_DISPLAY(x) ((x) << 2) > +#define YHGCH_CURR_GATE_DISPLAY_MASK 0x4 > + > +#define YHGCH_CURR_GATE_LOCALMEM(x) ((x) << 1) > +#define YHGCH_CURR_GATE_LOCALMEM_MASK 0x2 > + > +#define YHGCH_MODE0_GATE 0x000044 > +#define YHGCH_MODE1_GATE 0x000048 > +#define YHGCH_POWER_MODE_CTRL 0x00004C > + > +#define YHGCH_PW_MODE_CTL_OSC_INPUT(x) ((x) << 3) > +#define YHGCH_PW_MODE_CTL_OSC_INPUT_MASK 0x8 > + > +#define YHGCH_PW_MODE_CTL_MODE(x) ((x) << 0) > +#define YHGCH_PW_MODE_CTL_MODE_MASK 0x03 > +#define YHGCH_PW_MODE_CTL_MODE_SHIFT 0 > + > +#define YHGCH_PW_MODE_CTL_MODE_MODE0 0 > +#define YHGCH_PW_MODE_CTL_MODE_MODE1 1 > +#define YHGCH_PW_MODE_CTL_MODE_SLEEP 2 > + > +//#define YHGCH_CRT_PLL_CTRL 0x000060 > + > +#define YHGCH_PLL_CTRL_BYPASS(x) ((x) << 18) > +#define YHGCH_PLL_CTRL_BYPASS_MASK 0x40000 > + > +#define YHGCH_PLL_CTRL_POWER(x) ((x) << 17) > +#define YHGCH_PLL_CTRL_POWER_MASK 0x20000 > + > +#define YHGCH_PLL_CTRL_INPUT(x) ((x) << 16) > +#define YHGCH_PLL_CTRL_INPUT_MASK 0x10000 > + > +#define YHGCH_PLL_CTRL_POD(x) ((x) << 14) > +#define YHGCH_PLL_CTRL_POD_MASK 0xC000 > + > +#define YHGCH_PLL_CTRL_OD(x) ((x) << 12) > +#define YHGCH_PLL_CTRL_OD_MASK 0x3000 > + > +#define YHGCH_PLL_CTRL_N(x) ((x) << 8) > +#define YHGCH_PLL_CTRL_N_MASK 0xF00 > + > +#define YHGCH_PLL_CTRL_M(x) ((x) << 0) > +#define YHGCH_PLL_CTRL_M_MASK 0xFF > + > +#define YHGCH_CRT_DISP_CTL 0x80200 > + > +#define YHGCH_CRT_DISP_CTL_DPMS(x) ((x) << 30) > +#define YHGCH_CRT_DISP_CTL_DPMS_MASK 0xc0000000 > + > +#define YHGCH_CRT_DPMS_ON 0 > +#define YHGCH_CRT_DPMS_OFF 3 > + > +#define YHGCH_CRT_DISP_CTL_CRTSELECT(x) ((x) << 25) > +#define YHGCH_CRT_DISP_CTL_CRTSELECT_MASK 0x2000000 > + > +#define YHGCH_CRTSELECT_CRT 1 > + > +#define YHGCH_CRT_DISP_CTL_CLOCK_PHASE(x) ((x) << 14) > +#define YHGCH_CRT_DISP_CTL_CLOCK_PHASE_MASK 0x4000 > + > +#define YHGCH_CRT_DISP_CTL_VSYNC_PHASE(x) ((x) << 13) > +#define YHGCH_CRT_DISP_CTL_VSYNC_PHASE_MASK 0x2000 > + > +#define YHGCH_CRT_DISP_CTL_HSYNC_PHASE(x) ((x) << 12) > +#define YHGCH_CRT_DISP_CTL_HSYNC_PHASE_MASK 0x1000 > + > +#define YHGCH_CRT_DISP_CTL_TIMING(x) ((x) << 8) > +#define YHGCH_CRT_DISP_CTL_TIMING_MASK 0x100 > + > +#define YHGCH_CRT_DISP_CTL_PLANE(x) ((x) << 2) > +#define YHGCH_CRT_DISP_CTL_PLANE_MASK 4 > + > +#define YHGCH_CRT_DISP_CTL_FORMAT(x) ((x) << 0) > +#define YHGCH_CRT_DISP_CTL_FORMAT_MASK 0x03 > + > +#define YHGCH_CRT_FB_ADDRESS 0x080204 > + > +#define YHGCH_CRT_FB_WIDTH 0x080208 > +#define YHGCH_CRT_FB_WIDTH_WIDTH(x) ((x) << 16) > +#define YHGCH_CRT_FB_WIDTH_WIDTH_MASK 0x3FFF0000 > +#define YHGCH_CRT_FB_WIDTH_OFFS(x) ((x) << 0) > +#define YHGCH_CRT_FB_WIDTH_OFFS_MASK 0x3FFF > + > +#define YHGCH_CRT_HORZ_TOTAL 0x08020C > +#define YHGCH_CRT_HORZ_TOTAL_TOTAL(x) ((x) << 16) > +#define YHGCH_CRT_HORZ_TOTAL_TOTAL_MASK 0xFFF0000 > + > +#define YHGCH_CRT_HORZ_TOTAL_DISP_END(x) ((x) << 0) > +#define YHGCH_CRT_HORZ_TOTAL_DISP_END_MASK 0xFFF > + > +#define YHGCH_CRT_HORZ_SYNC 0x080210 > +#define YHGCH_CRT_HORZ_SYNC_WIDTH(x) ((x) << 16) > +#define YHGCH_CRT_HORZ_SYNC_WIDTH_MASK 0xFF0000 > + > +#define YHGCH_CRT_HORZ_SYNC_START(x) ((x) << 0) > +#define YHGCH_CRT_HORZ_SYNC_START_MASK 0xFFF > + > +#define YHGCH_CRT_VERT_TOTAL 0x080214 > +#define YHGCH_CRT_VERT_TOTAL_TOTAL(x) ((x) << 16) > +#define YHGCH_CRT_VERT_TOTAL_TOTAL_MASK 0x7FFF0000 > + > +#define YHGCH_CRT_VERT_TOTAL_DISP_END(x) ((x) << 0) > +#define YHGCH_CRT_VERT_TOTAL_DISP_END_MASK 0x7FF > + > +#define YHGCH_CRT_VERT_SYNC 0x080218 > +#define YHGCH_CRT_VERT_SYNC_HEIGHT(x) ((x) << 16) > +#define YHGCH_CRT_VERT_SYNC_HEIGHT_MASK 0x3F0000 > + > +#define YHGCH_CRT_VERT_SYNC_START(x) ((x) << 0) > +#define YHGCH_CRT_VERT_SYNC_START_MASK 0x7FF > + > +/* Hardware Cursor */ > +#define YHGCH_HWC_ADDRESS 0x080230 > +#define YHGCH_HWC_ADDRESS_ENABLE(x) ((x) << 31) > +#define YHGCH_HWC_ADDRESS_ENABLE_MASK 0x80000000 > +#define YHGCH_HWC_ADDRESS_ADDRESS(x) ((x) << 0) > +#define YHGCH_HWC_ADDRESS_ADDRESS_MASK 0xFFFFFFF > + > +#define YHGCH_HWC_LOCATION 0x080234 > +#define YHGCH_HWC_LOCATION_TOP(x) ((x) << 27) > +#define YHGCH_HWC_LOCATION_TOP_MASK 0x8000000 > +#define YHGCH_HWC_LOCATION_Y(x) ((x) << 16) > +#define YHGCH_HWC_LOCATION_Y_MASK 0x7FF0000 > +#define YHGCH_HWC_LOCATION_LEFT(x) ((x) << 11) > +#define YHGCH_HWC_LOCATION_LEFT_MASK 0x800 > +#define YHGCH_HWC_LOCATION_X(x) ((x) << 0) > +#define YHGCH_HWC_LOCATION_X_MASK 0x7FF > + > +#define YHGCH_HWC_COLOR_12 0x080238 > +#define YHGCH_HWC_COLOR_12_2_RGB(x) ((x) << 16) > +#define YHGCH_HWC_COLOR_12_2_RGB_MASK 0xFFFF0000 > +#define YHGCH_HWC_COLOR_12_1_RGB(x) ((x) << 0) > +#define YHGCH_HWC_COLOR_12_1_RGB_MASK 0xFFFF > + > +#define YHGCH_HWC_COLOR_3 0x08023C > +#define YHGCH_HWC_COLOR_3_RGB(x) ((x) << 0) > +#define YHGCH_HWC_COLOR_3_RGB_MASK 0xFFFF > + > +/* Auto Centering */ > +#define YHGCH_CRT_AUTO_CENTERING_TL 0x080280 > +#define YHGCH_CRT_AUTO_CENTERING_TL_TOP(x) ((x) << 16) > +#define YHGCH_CRT_AUTO_CENTERING_TL_TOP_MASK 0x7FF0000 > + > +#define YHGCH_CRT_AUTO_CENTERING_TL_LEFT(x) ((x) << 0) > +#define YHGCH_CRT_AUTO_CENTERING_TL_LEFT_MASK 0x7FF > + > +#define YHGCH_CRT_AUTO_CENTERING_BR 0x080284 > +#define YHGCH_CRT_AUTO_CENTERING_BR_BOTTOM(x) ((x) << 16) > +#define YHGCH_CRT_AUTO_CENTERING_BR_BOTTOM_MASK 0x7FF0000 > + > +#define YHGCH_CRT_AUTO_CENTERING_BR_RIGHT(x) ((x) << 0) > +#define YHGCH_CRT_AUTO_CENTERING_BR_RIGHT_MASK 0x7FF > + > +/* register to control panel output */ > +#define YHGCH_DISPLAY_CONTROL_HISILE 0x80288 > +#define YHGCH_DISPLAY_CONTROL_FPVDDEN(x) ((x) << 0) > +#define YHGCH_DISPLAY_CONTROL_PANELDATE(x) ((x) << 1) > +#define YHGCH_DISPLAY_CONTROL_FPEN(x) ((x) << 2) > +#define YHGCH_DISPLAY_CONTROL_VBIASEN(x) ((x) << 3) > + > +#define YHGCH_RAW_INTERRUPT 0x80290 > +#define YHGCH_RAW_INTERRUPT_VBLANK(x) ((x) << 2) > +#define YHGCH_RAW_INTERRUPT_VBLANK_MASK 0x4 > + > +#define YHGCH_RAW_INTERRUPT_EN 0x80298 > +#define YHGCH_RAW_INTERRUPT_EN_VBLANK(x) ((x) << 2) > +#define YHGCH_RAW_INTERRUPT_EN_VBLANK_MASK 0x4 > + > +/* register and values for PLL control */ > +#define CRT_PLL1_NS 0x802a8 > +#define CRT_PLL1_NS_OUTER_BYPASS(x) ((x) << 30) > +#define CRT_PLL1_NS_INTER_BYPASS(x) ((x) << 29) > +#define CRT_PLL1_NS_POWERON(x) ((x) << 24) > + > +#define CRT_PLL1_NS_25MHZ 0x00006691 //640x480 > +#define CRT_PLL1_NS_40MHZ 0x00004580 //800x600 > +#define CRT_PLL1_NS_65MHZ 0x00002568 //1024x768 > +#define CRT_PLL1_NS_83MHZ 0x000027bb //1280x800 > +#define CRT_PLL1_NS_106MHZ 0x000027ef //1440x900 > +#define CRT_PLL1_NS_108MHZ 0x000027f2 //1280x1024 > +#define CRT_PLL1_NS_146MHZ 0x00001575 //1680x1050 > +#define CRT_PLL1_NS_148MHZ 0x0000145f //1920x1080 > +#define CRT_PLL1_NS_193MHZ 0x000018f7 //1920x1200 > + > +#define CRT_PLL2_NS 0x802ac > +#define CRT_PLL2_NS_25MHZ 0x0 > +#define CRT_PLL2_NS_40MHZ 0x0 > +#define CRT_PLL2_NS_65MHZ 0x0 > +#define CRT_PLL2_NS_83MHZ 0x0 > +#define CRT_PLL2_NS_106MHZ 0x0 > +#define CRT_PLL2_NS_108MHZ 0x0 > +#define CRT_PLL2_NS_146MHZ 0x0 > +#define CRT_PLL2_NS_148MHZ 0x0 > +#define CRT_PLL2_NS_193MHZ 0x0 > + > +#endif > diff --git a/drivers/gpu/drm/yhgch/yhgch_drm_vdac.c b/drivers/gpu/drm/yhgch/yhgch_drm_vdac.c > new file mode 100644 > index 000000000000..5f4dd8700c8a > --- /dev/null > +++ b/drivers/gpu/drm/yhgch/yhgch_drm_vdac.c > @@ -0,0 +1,121 @@ > +// SPDX-License-Identifier: GPL-2.0 > + > +#include <linux/io.h> > + > +#include <drm/drm_atomic_helper.h> > +#include <drm/drm_edid.h> > +#include <drm/drm_probe_helper.h> > +#include <drm/drm_print.h> > +#include <drm/drm_simple_kms_helper.h> > + > +#include "yhgch_drm_drv.h" > +#include "yhgch_drm_regs.h" > + > +static int yhgch_connector_get_modes(struct drm_connector *connector) > +{ > + int count; > + const struct drm_edid *drm_edid; > + > + if (!drm_probe_ddc(connector->ddc)) > + drm_err(connector->dev, "smidebug: not find !!!\n"); not find what? > + > + drm_edid = drm_edid_read(connector); > + if (drm_edid) { > + drm_edid_connector_update(connector, drm_edid); > + count = drm_edid_connector_add_modes(connector); > + if (count) > + goto out; > + } > + > + count = drm_add_modes_noedid(connector, > + connector->dev->mode_config.max_width, > + connector->dev->mode_config.max_height); Let DRM core handle this for you. It already adds several default modes. > + drm_set_preferred_mode(connector, 1024, 768); > + > +out: > + drm_edid_free(drm_edid); > + return count; > +} > + > +static int yhgch_connector_helper_detect_from_ddc(struct drm_connector *connector, > + struct drm_modeset_acquire_ctx *ctx, > + bool force) > +{ > + if (drm_connector_helper_detect_from_ddc(connector, ctx, force) > + != connector_status_connected) { > + drm_err(connector->dev, "smidebug: ddc detect failed, force connect\n"); Don't be spammy for no reason. drm_dbg_kms(). > + } > + return connector_status_connected; > +} > + > +static const struct drm_connector_helper_funcs > + yhgch_connector_helper_funcs = { move to the previous line. > + .get_modes = yhgch_connector_get_modes, > + .detect_ctx = yhgch_connector_helper_detect_from_ddc, > +}; > + > +static const struct drm_connector_funcs yhgch_connector_funcs = { > + .fill_modes = drm_helper_probe_single_connector_modes, > + .destroy = drm_connector_cleanup, > + .reset = drm_atomic_helper_connector_reset, > + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, > + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, > +}; > + > +static void yhgch_encoder_enable(struct drm_encoder *encoder) > +{ > + u32 reg; > + struct drm_device *dev = encoder->dev; > + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); > + > + reg = readl(priv->mmio + YHGCH_DISPLAY_CONTROL_HISILE); > + reg |= YHGCH_DISPLAY_CONTROL_FPVDDEN(1); > + reg |= YHGCH_DISPLAY_CONTROL_PANELDATE(1); > + reg |= YHGCH_DISPLAY_CONTROL_FPEN(1); > + reg |= YHGCH_DISPLAY_CONTROL_VBIASEN(1); > + writel(reg, priv->mmio + YHGCH_DISPLAY_CONTROL_HISILE); > +} > + > +static const struct drm_encoder_helper_funcs yhgch_encoder_helper_funcs = { > + .enable = yhgch_encoder_enable, Add disable() or comment why there is none. > +}; > + > +int yhgch_vdac_init(struct yhgch_drm_private *priv) > +{ > + struct drm_device *dev = &priv->dev; > + struct drm_encoder *encoder = &priv->encoder; > + struct drm_crtc *crtc = &priv->crtc; > + struct drm_connector *connector = &priv->connector; > + struct i2c_adapter *ddc; > + int ret; > + > + ddc = yhgch_ddc_create(priv); > + if (IS_ERR(ddc)) { > + ret = PTR_ERR(ddc); > + drm_err(dev, "failed to create ddc: %d\n", ret); > + return ret; > + } > + > + encoder->possible_crtcs = drm_crtc_mask(crtc); > + ret = drmm_encoder_init(dev, encoder, NULL, DRM_MODE_ENCODER_DAC, NULL); > + if (ret) { > + drm_err(dev, "failed to init encoder: %d\n", ret); > + return ret; > + } > + > + drm_encoder_helper_add(encoder, &yhgch_encoder_helper_funcs); > + > + ret = drm_connector_init_with_ddc(dev, connector, > + &yhgch_connector_funcs, > + DRM_MODE_CONNECTOR_VGA, > + ddc); > + if (ret) { > + drm_err(dev, "failed to init connector: %d\n", ret); > + return ret; > + } > + drm_connector_helper_add(connector, &yhgch_connector_helper_funcs); > + > + drm_connector_attach_encoder(connector, encoder); > + > + return 0; > +} > -- > 2.43.5 > -- With best wishes Dmitry ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH v5 1/1] [DRIVER] gpu: drm: add support for Yhgc ZX1000 soc 2025-09-25 22:20 ` Dmitry Baryshkov @ 2025-09-28 6:05 ` Chu Guangqing 0 siblings, 0 replies; 22+ messages in thread From: Chu Guangqing @ 2025-09-28 6:05 UTC (permalink / raw) To: tzimmermann, maarten.lankhorst, mripard, airlied, simona, dmitry.baryshkov Cc: linux-kernel, dri-devel, Chu Guangqing Hi Dmitry, the v6 patch is here https://lore.kernel.org/all/20250928054123.32895-1-chuguangqing@inspur.com/ > -----邮件原件----- > 发件人: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> > 发送时间: 2025年9月26日 6:20 > 收件人: Gary Chu(楚光庆) <chuguangqing@inspur.com> > 抄送: tzimmermann@suse.de; maarten.lankhorst@linux.intel.com; > mripard@kernel.org; airlied@gmail.com; simona@ffwll.cc; > linux-kernel@vger.kernel.org; dri-devel@lists.freedesktop.org > 主题: Re: [PATCH v5 1/1] [DRIVER] gpu: drm: add support for Yhgc ZX1000 soc > chipset > > On Thu, Sep 25, 2025 at 05:17:15PM +0800, Chu Guangqing wrote: > > add support for Yhgc BMC soc chipset > > > > Signed-off-by: Chu Guangqing <chuguangqing@inspur.com> > > --- > > MAINTAINERS | 5 + > > drivers/gpu/drm/Kconfig | 2 + > > drivers/gpu/drm/Makefile | 1 + > > drivers/gpu/drm/yhgch/Kconfig | 11 + > > drivers/gpu/drm/yhgch/Makefile | 4 + > > drivers/gpu/drm/yhgch/yhgch_drm_de.c | 415 > +++++++++++++++++++++++++ > > drivers/gpu/drm/yhgch/yhgch_drm_drv.c | 310 ++++++++++++++++++ > > drivers/gpu/drm/yhgch/yhgch_drm_drv.h | 51 +++ > > drivers/gpu/drm/yhgch/yhgch_drm_i2c.c | 114 +++++++ > > drivers/gpu/drm/yhgch/yhgch_drm_regs.h | 208 +++++++++++++ > > drivers/gpu/drm/yhgch/yhgch_drm_vdac.c | 121 +++++++ > > 11 files changed, 1242 insertions(+) > > create mode 100644 drivers/gpu/drm/yhgch/Kconfig create mode > 100644 > > drivers/gpu/drm/yhgch/Makefile create mode 100644 > > drivers/gpu/drm/yhgch/yhgch_drm_de.c > > create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_drv.c > > create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_drv.h > > create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_i2c.c > > create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_regs.h > > create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_vdac.c > > > > diff --git a/MAINTAINERS b/MAINTAINERS index > > 10614ca41ed0..c79d9361fa81 100644 > > --- a/MAINTAINERS > > +++ b/MAINTAINERS > > @@ -27744,6 +27744,11 @@ S: Maintained > > F: Documentation/input/devices/yealink.rst > > F: drivers/input/misc/yealink.* > > > > +YHGC DRM DRIVER > > +M: chuguangqing <chuguangqing@inspur.com> > > +S: Maintained > > +F: drivers/gpu/drm/yhgch > > + > > Z8530 DRIVER FOR AX.25 > > M: Joerg Reuter <jreuter@yaina.de> > > L: linux-hams@vger.kernel.org > > diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index > > f7ea8e895c0c..8e0b1d12c81f 100644 > > --- a/drivers/gpu/drm/Kconfig > > +++ b/drivers/gpu/drm/Kconfig > > @@ -396,6 +396,8 @@ source "drivers/gpu/drm/sprd/Kconfig" > > > > source "drivers/gpu/drm/imagination/Kconfig" > > > > +source "drivers/gpu/drm/yhgch/Kconfig" > > + > > config DRM_HYPERV > > tristate "DRM Support for Hyper-V synthetic video device" > > depends on DRM && PCI && HYPERV > > diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile index > > 4dafbdc8f86a..f344e0173b29 100644 > > --- a/drivers/gpu/drm/Makefile > > +++ b/drivers/gpu/drm/Makefile > > @@ -231,6 +231,7 @@ obj-y += solomon/ > > obj-$(CONFIG_DRM_SPRD) += sprd/ > > obj-$(CONFIG_DRM_LOONGSON) += loongson/ > > obj-$(CONFIG_DRM_POWERVR) += imagination/ > > +obj-$(CONFIG_DRM_YHGCH) += yhgch/ > > > > # Ensure drm headers are self-contained and pass kernel-doc > > hdrtest-files := \ diff --git a/drivers/gpu/drm/yhgch/Kconfig > > b/drivers/gpu/drm/yhgch/Kconfig new file mode 100644 index > > 000000000000..695d29409444 > > --- /dev/null > > +++ b/drivers/gpu/drm/yhgch/Kconfig > > @@ -0,0 +1,11 @@ > > +config DRM_YHGCH > > + tristate "DRM Support for Yhgch BMC" > > + depends on DRM && PCI && MMU > > + select DRM_CLIENT_SELECTION > > + select DRM_KMS_HELPER > > + select DRM_GEM_SHMEM_HELPER > > + help > > + Choose this option if you have a Yhgch soc chipset. > > + If M is selected the module will be called yhgch-drm. > > + IF Y is selected the module will be built into the kernel. > > + IF N is selected the module will be excluded from the kernel. > > diff --git a/drivers/gpu/drm/yhgch/Makefile > > b/drivers/gpu/drm/yhgch/Makefile new file mode 100644 index > > 000000000000..30de2fd27f18 > > --- /dev/null > > +++ b/drivers/gpu/drm/yhgch/Makefile > > @@ -0,0 +1,4 @@ > > +yhgch-drm-y := yhgch_drm_drv.o yhgch_drm_de.o yhgch_drm_vdac.o > > +yhgch_drm_i2c.o > > + > > +obj-$(CONFIG_DRM_YHGCH) += yhgch-drm.o > > + > > diff --git a/drivers/gpu/drm/yhgch/yhgch_drm_de.c > > b/drivers/gpu/drm/yhgch/yhgch_drm_de.c > > new file mode 100644 > > index 000000000000..c2c38c3e7637 > > --- /dev/null > > +++ b/drivers/gpu/drm/yhgch/yhgch_drm_de.c > > @@ -0,0 +1,415 @@ > > +// SPDX-License-Identifier: GPL-2.0-or-later > > + > > +#include <linux/delay.h> > > +#include <drm/drm_atomic.h> > > +#include <drm/drm_gem_atomic_helper.h> #include > > +<drm/drm_atomic_helper.h> #include <drm/drm_gem_shmem_helper.h> > > +#include <drm/drm_format_helper.h> #include > <drm/drm_damage_helper.h> > > +#include <drm/drm_fourcc.h> > > + > > +#include <drm/drm_vblank.h> > > + > > +#include "yhgch_drm_drv.h" > > +#include "yhgch_drm_regs.h" > > + > > +struct yhgch_dislay_pll_config { > > + u64 hdisplay; > > + u64 vdisplay; > > + u32 pll1_config_value; > > + u32 pll2_config_value; > > +}; > > + > > +static const struct yhgch_dislay_pll_config yhgch_pll_table[] = { > > + { 640, 480, CRT_PLL1_NS_25MHZ, CRT_PLL2_NS_25MHZ }, > > + { 800, 600, CRT_PLL1_NS_40MHZ, CRT_PLL2_NS_40MHZ }, > > + { 1024, 768, CRT_PLL1_NS_65MHZ, CRT_PLL2_NS_65MHZ }, > > + { 1280, 1024, CRT_PLL1_NS_108MHZ, CRT_PLL2_NS_108MHZ }, > > + { 1920, 1080, CRT_PLL1_NS_148MHZ, CRT_PLL2_NS_148MHZ }, }; > > + > > +static int yhgch_plane_atomic_check(struct drm_plane *plane, > > + struct drm_atomic_state *state) { > > + struct drm_plane_state *new_plane_state = > drm_atomic_get_new_plane_state(state, > > + plane); > > + struct drm_framebuffer *fb = new_plane_state->fb; > > + struct drm_crtc_state *new_crtc_state = NULL; > > + int ret; > > + > > + if (!fb) > > + return 0; > > + > > + if (new_plane_state->crtc) > > + new_crtc_state = drm_atomic_get_new_crtc_state(state, > > +new_plane_state->crtc); > > + > > + ret = drm_atomic_helper_check_plane_state(new_plane_state, > new_crtc_state, > > + DRM_PLANE_NO_SCALING, > > + DRM_PLANE_NO_SCALING, > > + false, true); > > + if (ret) > > + return ret; > > + if (!new_plane_state->visible) > > + return 0; > > + > > + return 0; > > Hmm, can you simplify that to just: > > return drm_atomic_helper_check_plane_state(); ? > Have simplify return drm_atomic_helper_check_plane_state(); > > +} > > + > > [...] > > > + > > +static const struct drm_crtc_funcs yhgch_crtc_funcs = { > > + .page_flip = drm_atomic_helper_page_flip, > > + .set_config = drm_atomic_helper_set_config, > > + .destroy = drm_crtc_cleanup, > > + .reset = drm_atomic_helper_crtc_reset, > > + .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state, > > + .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state, > > + > > Extra empty line > Delete empty line > > +}; > > + > > +static const struct drm_crtc_helper_funcs yhgch_crtc_helper_funcs = { > > + .mode_set_nofb = yhgch_crtc_mode_set_nofb, > > + .atomic_begin = yhgch_crtc_atomic_begin, > > + .atomic_enable = yhgch_crtc_atomic_enable, > > + .atomic_disable = yhgch_crtc_atomic_disable, > > + .mode_valid = yhgch_crtc_mode_valid, }; > > + > > +int yhgch_de_init(struct yhgch_drm_private *priv) { > > + struct drm_device *dev = &priv->dev; > > + struct drm_crtc *crtc = &priv->crtc; > > + struct drm_plane *plane = &priv->primary_plane; > > + int ret; > > + > > + ret = drm_universal_plane_init(dev, plane, 1, &yhgch_plane_funcs, > > + channel_formats1, > > + ARRAY_SIZE(channel_formats1), > > + NULL, > > + DRM_PLANE_TYPE_PRIMARY, > > + NULL); > > + if (ret) { > > + drm_err(dev, "failed to init plane: %d\n", ret); > > + return ret; > > + } > > + > > + drm_plane_helper_add(plane, &yhgch_plane_helper_funcs); > > + drm_plane_enable_fb_damage_clips(plane); > > + > > + ret = drm_crtc_init_with_planes(dev, crtc, plane, > > + NULL, &yhgch_crtc_funcs, NULL); > > + if (ret) { > > + drm_err(dev, "failed to init crtc: %d\n", ret); > > + return ret; > > + } > > + > > + drm_crtc_helper_add(crtc, &yhgch_crtc_helper_funcs); > > + > > + return 0; > > +} > > diff --git a/drivers/gpu/drm/yhgch/yhgch_drm_drv.c > > b/drivers/gpu/drm/yhgch/yhgch_drm_drv.c > > new file mode 100644 > > index 000000000000..2d7588ab8e2c > > --- /dev/null > > +++ b/drivers/gpu/drm/yhgch/yhgch_drm_drv.c > > @@ -0,0 +1,310 @@ > > +// SPDX-License-Identifier: GPL-2.0 > > +#include <linux/module.h> > > +#include <linux/pci.h> > > +#include <linux/bitfield.h> > > + > > +#include <linux/aperture.h> > > +#include <drm/clients/drm_client_setup.h> > > + > > +#include <drm/drm_atomic_helper.h> > > +#include <drm/drm_drv.h> > > +#include <drm/drm_fbdev_ttm.h> > > + > > +#include <drm/drm_gem_framebuffer_helper.h> > > +#include <drm/drm_fbdev_shmem.h> > > +#include <drm/drm_gem_shmem_helper.h> #include > <drm/drm_managed.h> > > +#include <drm/drm_module.h> #include <drm/drm_vblank.h> > > + > > +#include <drm/drm_probe_helper.h> > > + > > +#include "yhgch_drm_drv.h" > > +#include "yhgch_drm_regs.h" > > + > > +#define MEM_SIZE_RESERVE4KVM 0x200000 > > + > > +DEFINE_DRM_GEM_FOPS(yhgch_fops); > > + > > +int yhgch_dumb_create(struct drm_file *file, struct drm_device *dev, > > + struct drm_mode_create_dumb *args) { > > + args->width = ALIGN(args->width, 8); > > + return drm_gem_shmem_dumb_create(file, dev, args); } > > + > > +static struct drm_driver yhgch_driver = { > > + .driver_features = DRIVER_GEM | DRIVER_MODESET | > DRIVER_ATOMIC, > > + .fops = &yhgch_fops, > > + .name = "yhgch", > > + .desc = "yhgch drm driver", > > + .major = 3, > > + .minor = 1, > > + .dumb_create = yhgch_dumb_create, > > + DRM_FBDEV_SHMEM_DRIVER_OPS, > > +}; > > + > > +static int __maybe_unused yhgch_pm_suspend(struct device *dev) { > > + struct drm_device *drm_dev = dev_get_drvdata(dev); > > + > > + return drm_mode_config_helper_suspend(drm_dev); > > +} > > + > > +static int __maybe_unused yhgch_pm_resume(struct device *dev) { > > + struct drm_device *drm_dev = dev_get_drvdata(dev); > > + > > + return drm_mode_config_helper_resume(drm_dev); > > +} > > + > > +static const struct dev_pm_ops yhgch_pm_ops = { > > + SET_SYSTEM_SLEEP_PM_OPS(yhgch_pm_suspend, > > + yhgch_pm_resume) > > +}; > > + > > +static const struct drm_mode_config_funcs yhgch_mode_funcs = { > > + .atomic_check = drm_atomic_helper_check, > > + .atomic_commit = drm_atomic_helper_commit, > > + .fb_create = drm_gem_fb_create_with_dirty, }; > > + > > +static int yhgch_kms_init(struct yhgch_drm_private *priv) { > > + struct drm_device *dev = &priv->dev; > > + int ret; > > + > > + ret = drmm_mode_config_init(dev); > > + if (ret) > > + return ret; > > + > > + dev->mode_config.min_width = 0; > > + dev->mode_config.min_height = 0; > > + dev->mode_config.max_width = 1920; > > + dev->mode_config.max_height = 1200; > > + dev->mode_config.preferred_depth = 24; > > + dev->mode_config.prefer_shadow = 1; > > + dev->mode_config.funcs = &yhgch_mode_funcs; > > + > > + ret = yhgch_de_init(priv); > > + if (ret) { > > + drm_err(dev, "failed to init de: %d\n", ret); > > + return ret; > > + } > > + > > + ret = yhgch_vdac_init(priv); > > + if (ret) { > > + drm_err(dev, "failed to init vdac: %d\n", ret); > > + return ret; > > + } > > + drm_kms_helper_poll_init(dev); > > + > > + return 0; > > +} > > + > > +/* > > + * It can operate in one of three modes: 0, 1 or Sleep. > > + */ > > +void yhgch_set_power_mode(struct yhgch_drm_private *priv, u32 > > +power_mode) { > > + unsigned int control_value = 0; > > + void __iomem *mmio = priv->mmio; > > + u32 input = 1; > > + > > + if (power_mode > YHGCH_PW_MODE_CTL_MODE_SLEEP) > > + return; > > + > > + if (power_mode == YHGCH_PW_MODE_CTL_MODE_SLEEP) > > + input = 0; > > + > > + control_value = readl(mmio + YHGCH_POWER_MODE_CTRL); > > + control_value &= ~(YHGCH_PW_MODE_CTL_MODE_MASK | > > + YHGCH_PW_MODE_CTL_OSC_INPUT_MASK); > > + control_value |= FIELD_PREP(YHGCH_PW_MODE_CTL_MODE_MASK, > power_mode); > > + control_value |= FIELD_PREP(YHGCH_PW_MODE_CTL_OSC_INPUT_MASK, > input); > > + writel(control_value, mmio + YHGCH_POWER_MODE_CTRL); } > > + > > +void yhgch_set_current_gate(struct yhgch_drm_private *priv, unsigned > > +int gate) { > > + u32 gate_reg; > > + u32 mode; > > + void __iomem *mmio = priv->mmio; > > + > > + /* Get current power mode. */ > > + mode = (readl(mmio + YHGCH_POWER_MODE_CTRL) & > > + YHGCH_PW_MODE_CTL_MODE_MASK) >> > YHGCH_PW_MODE_CTL_MODE_SHIFT; > > + > > + switch (mode) { > > + case YHGCH_PW_MODE_CTL_MODE_MODE0: > > + gate_reg = YHGCH_MODE0_GATE; > > + break; > > + > > + case YHGCH_PW_MODE_CTL_MODE_MODE1: > > + gate_reg = YHGCH_MODE1_GATE; > > + break; > > + > > + default: > > + gate_reg = YHGCH_MODE0_GATE; > > + break; > > + } > > + writel(gate, mmio + gate_reg); > > +} > > + > > +static void yhgch_hw_config(struct yhgch_drm_private *priv) { > > + u32 reg; > > + > > + /* On hardware reset, power mode 0 is default. */ > > + yhgch_set_power_mode(priv, YHGCH_PW_MODE_CTL_MODE_MODE0); > > + > > + /* Enable display power gate & LOCALMEM power gate */ > > + reg = readl(priv->mmio + YHGCH_CURRENT_GATE); > > + reg &= ~YHGCH_CURR_GATE_DISPLAY_MASK; > > + reg &= ~YHGCH_CURR_GATE_LOCALMEM_MASK; > > + reg |= YHGCH_CURR_GATE_DISPLAY(1); > > + reg |= YHGCH_CURR_GATE_LOCALMEM(1); > > + > > + yhgch_set_current_gate(priv, reg); > > + > > + /* > > + * Reset the memory controller. If the memory controller > > + * is not reset in chip,the system might hang when sw accesses > > + * the memory.The memory should be resetted after > > + * changing the MXCLK. > > + */ > > + reg = readl(priv->mmio + YHGCH_MISC_CTRL); > > + reg &= ~YHGCH_MSCCTL_LOCALMEM_RESET_MASK; > > + reg |= YHGCH_MSCCTL_LOCALMEM_RESET(0); > > + writel(reg, priv->mmio + YHGCH_MISC_CTRL); > > + > > + reg &= ~YHGCH_MSCCTL_LOCALMEM_RESET_MASK; > > + reg |= YHGCH_MSCCTL_LOCALMEM_RESET(1); > > + > > + writel(reg, priv->mmio + YHGCH_MISC_CTRL); } > > + > > +static int yhgch_hw_map(struct yhgch_drm_private *priv) { > > + struct drm_device *dev = &priv->dev; > > + struct pci_dev *pdev = to_pci_dev(dev->dev); > > + resource_size_t ioaddr, iosize; > > + > > + ioaddr = pci_resource_start(pdev, 1); > > + iosize = pci_resource_len(pdev, 1); > > + priv->mmio = devm_ioremap(dev->dev, ioaddr, iosize); > > + if (!priv->mmio) { > > + drm_err(dev, "Cannot map mmio region\n"); > > + return -ENOMEM; > > + } > > + > > + ioaddr = pci_resource_start(pdev, 0); > > + iosize = pci_resource_len(pdev, 0); > > + priv->vram_base = devm_ioremap_wc(dev->dev, ioaddr, iosize); > > + if (!priv->vram_base) { > > + drm_err(dev, "Cannot map vram region\n"); > > + return -ENOMEM; > > + } > > + return 0; > > +} > > + > > +static int yhgch_hw_init(struct yhgch_drm_private *priv) { > > + int ret; > > + > > + ret = yhgch_hw_map(priv); > > + if (ret) > > + return ret; > > + yhgch_hw_config(priv); > > + return 0; > > +} > > + > > +static int yhgch_pci_probe(struct pci_dev *pdev, > > + const struct pci_device_id *ent) { > > + struct yhgch_drm_private *priv; > > + struct drm_device *dev; > > + int ret; > > + > > + ret = aperture_remove_conflicting_pci_devices(pdev, > > +yhgch_driver.name); > > + > > + if (ret) > > + return ret; > > + > > + priv = devm_drm_dev_alloc(&pdev->dev, &yhgch_driver, > > + struct yhgch_drm_private, dev); > > + > > + if (IS_ERR(priv)) > > + return PTR_ERR(priv); > > + > > + dev = &priv->dev; > > + pci_set_drvdata(pdev, dev); > > + > > + ret = pcim_enable_device(pdev); > > + if (ret) { > > + drm_err(dev, "failed to enable pci device: %d\n", ret); > > + goto err_return; > > + } > > + > > + ret = yhgch_hw_init(priv); > > + if (ret) > > + goto err_return; > > + > > + ret = yhgch_kms_init(priv); > > + if (ret) > > + goto err_return; > > + > > + ret = pci_enable_msi(pdev); > > + if (ret) > > + drm_warn(dev, "enabling MSI failed: %d\n", ret); > > + /* reset all the states of crtc/plane/encoder/connector */ > > + drm_mode_config_reset(dev); > > + > > + ret = drm_dev_register(dev, 0); > > + if (ret) { > > + drm_err(dev, "failed to register drv for userspace access: %d\n", > > + ret); > > + goto err_return; > > + } > > + drm_client_setup(dev, NULL); > > + > > + return 0; > > + > > +err_return: > > + return ret; > > +} > > + > > +static void yhgch_pci_remove(struct pci_dev *pdev) { > > + struct drm_device *dev = pci_get_drvdata(pdev); > > + > > + drm_dev_unregister(dev); > > + drm_dev_put(dev); > > +} > > + > > +static void yhgch_pci_shutdown(struct pci_dev *pdev) { > > + drm_atomic_helper_shutdown(pci_get_drvdata(pdev)); > > +} > > + > > +static struct pci_device_id yhgch_pci_table[] = { > > + { 0x1bd4, 0x0750, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, > > + { 0, } > > +}; > > + > > +static struct pci_driver yhgch_pci_driver = { > > + .name = "yhgch-drm", > > + .id_table = yhgch_pci_table, > > + .probe = yhgch_pci_probe, > > + .remove = yhgch_pci_remove, > > + .shutdown = yhgch_pci_shutdown, > > + .driver.pm = &yhgch_pm_ops, > > +}; > > + > > +drm_module_pci_driver(yhgch_pci_driver); > > + > > +MODULE_DEVICE_TABLE(pci, yhgch_pci_table); MODULE_AUTHOR("Chu > > +Guangqing <chuguangqing@inspur.com>"); MODULE_DESCRIPTION("DRM > Driver > > +for YhgchBMC"); MODULE_LICENSE("GPL"); MODULE_VERSION("3.1"); > > diff --git a/drivers/gpu/drm/yhgch/yhgch_drm_drv.h > > b/drivers/gpu/drm/yhgch/yhgch_drm_drv.h > > new file mode 100644 > > index 000000000000..1b8b1e5b0a43 > > --- /dev/null > > +++ b/drivers/gpu/drm/yhgch/yhgch_drm_drv.h > > @@ -0,0 +1,51 @@ > > +/* SPDX-License-Identifier: GPL-2.0 */ > > + > > +#ifndef YHGCH_DRM_DRV_H > > +#define YHGCH_DRM_DRV_H > > + > > +#include <linux/gpio/consumer.h> > > +#include <linux/i2c-algo-bit.h> > > +#include <linux/i2c.h> > > +#include <linux/version.h> > > +#include <linux/bitfield.h> > > +#include <drm/drm_framebuffer.h> > > +#include <drm/drm_encoder.h> > > + > > +struct yhgch_ddc { > > + struct yhgch_drm_private *priv; > > + struct i2c_adapter adapter; > > + struct i2c_algo_bit_data bit_data; > > +}; > > + > > +struct yhgch_drm_private { > > + /* hw */ > > + void __iomem *mmio; > > + void __iomem *vram_base; > > + > > + /* drm */ > > + struct drm_device dev; > > + struct drm_plane primary_plane; > > + struct drm_crtc crtc; > > + struct drm_encoder encoder; > > + struct drm_connector connector; > > +}; > > + > > +static inline struct yhgch_drm_private *to_yhgch_drm_private(struct > > +drm_device *dev) { > > + return container_of(dev, struct yhgch_drm_private, dev); } > > + > > +void yhgch_set_power_mode(struct yhgch_drm_private *priv, > > + u32 power_mode); > > +void yhgch_set_current_gate(struct yhgch_drm_private *priv, > > + u32 gate); > > + > > +int yhgch_de_init(struct yhgch_drm_private *priv); int > > +yhgch_vdac_init(struct yhgch_drm_private *priv); int > > +yhgch_mm_init(struct yhgch_drm_private *yhgch); struct i2c_adapter > > +*yhgch_ddc_create(struct yhgch_drm_private *priv); > > + > > +int yhgch_dumb_create(struct drm_file *file, struct drm_device *dev, > > + struct drm_mode_create_dumb *args); > > + > > +#endif > > diff --git a/drivers/gpu/drm/yhgch/yhgch_drm_i2c.c > > b/drivers/gpu/drm/yhgch/yhgch_drm_i2c.c > > new file mode 100644 > > index 000000000000..7bbe9a0540d4 > > --- /dev/null > > +++ b/drivers/gpu/drm/yhgch/yhgch_drm_i2c.c > > @@ -0,0 +1,114 @@ > > +// SPDX-License-Identifier: GPL-2.0-or-later > > + > > +#include <linux/delay.h> > > +#include <linux/pci.h> > > + > > +#include <drm/drm_atomic_helper.h> > > +#include <drm/drm_probe_helper.h> > > + > > +#include <drm/drm_managed.h> > > + > > +#include "yhgch_drm_drv.h" > > + > > +#define GPIO_DATA 0x0802A0 > > +#define GPIO_DATA_DIRECTION 0x0802A4 > > + > > +#define I2C_SCL_MASK BIT(0) > > +#define I2C_SDA_MASK BIT(1) > > + > > +static void yhgch_set_i2c_signal(void *data, u32 mask, int value) { > > + struct yhgch_ddc *ddc = data; > > + struct yhgch_drm_private *priv = ddc->priv; > > + u32 tmp_dir = readl(priv->mmio + GPIO_DATA_DIRECTION); > > + > > + if (value) { > > + tmp_dir &= ~mask; > > + writel(tmp_dir, priv->mmio + GPIO_DATA_DIRECTION); > > + } else { > > + u32 tmp_data = readl(priv->mmio + GPIO_DATA); > > + > > + tmp_data &= ~mask; > > + writel(tmp_data, priv->mmio + GPIO_DATA); > > + > > + tmp_dir |= mask; > > + writel(tmp_dir, priv->mmio + GPIO_DATA_DIRECTION); > > + } > > +} > > + > > +static int yhgch_get_i2c_signal(void *data, u32 mask) { > > + struct yhgch_ddc *ddc = data; > > + struct yhgch_drm_private *priv = ddc->priv; > > + u32 tmp_dir = readl(priv->mmio + GPIO_DATA_DIRECTION); > > + > > + if ((tmp_dir & mask) != mask) { > > + tmp_dir &= ~mask; > > + writel(tmp_dir, priv->mmio + GPIO_DATA_DIRECTION); > > + } > > + > > + return (readl(priv->mmio + GPIO_DATA) & mask) ? 1 : 0; } > > + > > +static void yhgch_ddc_setsda(void *data, int state) { > > + yhgch_set_i2c_signal(data, I2C_SDA_MASK, state); } > > + > > +static void yhgch_ddc_setscl(void *data, int state) { > > + yhgch_set_i2c_signal(data, I2C_SCL_MASK, state); } > > + > > +static int yhgch_ddc_getsda(void *data) { > > + return yhgch_get_i2c_signal(data, I2C_SDA_MASK); } > > + > > +static int yhgch_ddc_getscl(void *data) { > > + return yhgch_get_i2c_signal(data, I2C_SCL_MASK); } > > + > > +static void yhgch_ddc_release(struct drm_device *dev, void *res) { > > + struct yhgch_ddc *ddc = res; > > + > > + i2c_del_adapter(&ddc->adapter); > > +} > > + > > +struct i2c_adapter *yhgch_ddc_create(struct yhgch_drm_private *priv) > > +{ > > + int ret = 0; > > + struct yhgch_ddc *ddc; > > + struct drm_device *dev = &priv->dev; > > + > > + ddc = drmm_kzalloc(dev, sizeof(struct yhgch_ddc), GFP_KERNEL); > > + if (!ddc) > > + return ERR_PTR(-ENOMEM); > > + > > + ddc->adapter.owner = THIS_MODULE; > > + ddc->priv = priv; > > + snprintf(ddc->adapter.name, I2C_NAME_SIZE, "INS i2c bit bus"); > > + ddc->adapter.dev.parent = priv->dev.dev; > > + i2c_set_adapdata(&ddc->adapter, ddc); > > + ddc->adapter.algo_data = &ddc->bit_data; > > + > > + ddc->bit_data.udelay = 20; > > + ddc->bit_data.timeout = usecs_to_jiffies(2000); > > + ddc->bit_data.data = ddc; > > + ddc->bit_data.setsda = yhgch_ddc_setsda; > > + ddc->bit_data.setscl = yhgch_ddc_setscl; > > + ddc->bit_data.getsda = yhgch_ddc_getsda; > > + ddc->bit_data.getscl = yhgch_ddc_getscl; > > + > > + ret = i2c_bit_add_bus(&ddc->adapter); > > + if (ret) > > + return ERR_PTR(ret); > > + > > + ret = drmm_add_action_or_reset(&priv->dev, yhgch_ddc_release, ddc); > > + if (ret) > > + return ERR_PTR(ret); > > + > > + return &ddc->adapter; > > +} > > diff --git a/drivers/gpu/drm/yhgch/yhgch_drm_regs.h > > b/drivers/gpu/drm/yhgch/yhgch_drm_regs.h > > new file mode 100644 > > index 000000000000..cecb6173a445 > > --- /dev/null > > +++ b/drivers/gpu/drm/yhgch/yhgch_drm_regs.h > > @@ -0,0 +1,208 @@ > > +/* SPDX-License-Identifier: GPL-2.0 */ > > + > > +#ifndef YHGCH_DRM_HW_H > > +#define YHGCH_DRM_HW_H > > + > > +/* register definition */ > > +#define YHGCH_MISC_CTRL 0x4 > > + > > +#define YHGCH_MSCCTL_LOCALMEM_RESET(x) ((x) << 6) > > +#define YHGCH_MSCCTL_LOCALMEM_RESET_MASK 0x40 > > + > > +#define YHGCH_CURRENT_GATE 0x000040 > > +#define YHGCH_CURR_GATE_DISPLAY(x) ((x) << 2) > > +#define YHGCH_CURR_GATE_DISPLAY_MASK 0x4 > > + > > +#define YHGCH_CURR_GATE_LOCALMEM(x) ((x) << 1) > > +#define YHGCH_CURR_GATE_LOCALMEM_MASK 0x2 > > + > > +#define YHGCH_MODE0_GATE 0x000044 > > +#define YHGCH_MODE1_GATE 0x000048 > > +#define YHGCH_POWER_MODE_CTRL 0x00004C > > + > > +#define YHGCH_PW_MODE_CTL_OSC_INPUT(x) ((x) << 3) > > +#define YHGCH_PW_MODE_CTL_OSC_INPUT_MASK 0x8 > > + > > +#define YHGCH_PW_MODE_CTL_MODE(x) ((x) << 0) > > +#define YHGCH_PW_MODE_CTL_MODE_MASK 0x03 > > +#define YHGCH_PW_MODE_CTL_MODE_SHIFT 0 > > + > > +#define YHGCH_PW_MODE_CTL_MODE_MODE0 0 > > +#define YHGCH_PW_MODE_CTL_MODE_MODE1 1 > > +#define YHGCH_PW_MODE_CTL_MODE_SLEEP 2 > > + > > +//#define YHGCH_CRT_PLL_CTRL 0x000060 > > + > > +#define YHGCH_PLL_CTRL_BYPASS(x) ((x) << 18) > > +#define YHGCH_PLL_CTRL_BYPASS_MASK 0x40000 > > + > > +#define YHGCH_PLL_CTRL_POWER(x) ((x) << 17) > > +#define YHGCH_PLL_CTRL_POWER_MASK 0x20000 > > + > > +#define YHGCH_PLL_CTRL_INPUT(x) ((x) << 16) > > +#define YHGCH_PLL_CTRL_INPUT_MASK 0x10000 > > + > > +#define YHGCH_PLL_CTRL_POD(x) ((x) << 14) > > +#define YHGCH_PLL_CTRL_POD_MASK 0xC000 > > + > > +#define YHGCH_PLL_CTRL_OD(x) ((x) << 12) > > +#define YHGCH_PLL_CTRL_OD_MASK 0x3000 > > + > > +#define YHGCH_PLL_CTRL_N(x) ((x) << 8) > > +#define YHGCH_PLL_CTRL_N_MASK 0xF00 > > + > > +#define YHGCH_PLL_CTRL_M(x) ((x) << 0) > > +#define YHGCH_PLL_CTRL_M_MASK 0xFF > > + > > +#define YHGCH_CRT_DISP_CTL 0x80200 > > + > > +#define YHGCH_CRT_DISP_CTL_DPMS(x) ((x) << 30) > > +#define YHGCH_CRT_DISP_CTL_DPMS_MASK 0xc0000000 > > + > > +#define YHGCH_CRT_DPMS_ON 0 > > +#define YHGCH_CRT_DPMS_OFF 3 > > + > > +#define YHGCH_CRT_DISP_CTL_CRTSELECT(x) ((x) << 25) > > +#define YHGCH_CRT_DISP_CTL_CRTSELECT_MASK 0x2000000 > > + > > +#define YHGCH_CRTSELECT_CRT 1 > > + > > +#define YHGCH_CRT_DISP_CTL_CLOCK_PHASE(x) ((x) << 14) > > +#define YHGCH_CRT_DISP_CTL_CLOCK_PHASE_MASK 0x4000 > > + > > +#define YHGCH_CRT_DISP_CTL_VSYNC_PHASE(x) ((x) << 13) > > +#define YHGCH_CRT_DISP_CTL_VSYNC_PHASE_MASK 0x2000 > > + > > +#define YHGCH_CRT_DISP_CTL_HSYNC_PHASE(x) ((x) << 12) > > +#define YHGCH_CRT_DISP_CTL_HSYNC_PHASE_MASK 0x1000 > > + > > +#define YHGCH_CRT_DISP_CTL_TIMING(x) ((x) << 8) > > +#define YHGCH_CRT_DISP_CTL_TIMING_MASK 0x100 > > + > > +#define YHGCH_CRT_DISP_CTL_PLANE(x) ((x) << 2) > > +#define YHGCH_CRT_DISP_CTL_PLANE_MASK 4 > > + > > +#define YHGCH_CRT_DISP_CTL_FORMAT(x) ((x) << 0) > > +#define YHGCH_CRT_DISP_CTL_FORMAT_MASK 0x03 > > + > > +#define YHGCH_CRT_FB_ADDRESS 0x080204 > > + > > +#define YHGCH_CRT_FB_WIDTH 0x080208 > > +#define YHGCH_CRT_FB_WIDTH_WIDTH(x) ((x) << 16) > > +#define YHGCH_CRT_FB_WIDTH_WIDTH_MASK 0x3FFF0000 > > +#define YHGCH_CRT_FB_WIDTH_OFFS(x) ((x) << 0) > > +#define YHGCH_CRT_FB_WIDTH_OFFS_MASK 0x3FFF > > + > > +#define YHGCH_CRT_HORZ_TOTAL 0x08020C > > +#define YHGCH_CRT_HORZ_TOTAL_TOTAL(x) ((x) << 16) > > +#define YHGCH_CRT_HORZ_TOTAL_TOTAL_MASK 0xFFF0000 > > + > > +#define YHGCH_CRT_HORZ_TOTAL_DISP_END(x) ((x) << 0) > > +#define YHGCH_CRT_HORZ_TOTAL_DISP_END_MASK 0xFFF > > + > > +#define YHGCH_CRT_HORZ_SYNC 0x080210 > > +#define YHGCH_CRT_HORZ_SYNC_WIDTH(x) ((x) << 16) > > +#define YHGCH_CRT_HORZ_SYNC_WIDTH_MASK 0xFF0000 > > + > > +#define YHGCH_CRT_HORZ_SYNC_START(x) ((x) << 0) > > +#define YHGCH_CRT_HORZ_SYNC_START_MASK 0xFFF > > + > > +#define YHGCH_CRT_VERT_TOTAL 0x080214 > > +#define YHGCH_CRT_VERT_TOTAL_TOTAL(x) ((x) << 16) > > +#define YHGCH_CRT_VERT_TOTAL_TOTAL_MASK 0x7FFF0000 > > + > > +#define YHGCH_CRT_VERT_TOTAL_DISP_END(x) ((x) << 0) > > +#define YHGCH_CRT_VERT_TOTAL_DISP_END_MASK 0x7FF > > + > > +#define YHGCH_CRT_VERT_SYNC 0x080218 > > +#define YHGCH_CRT_VERT_SYNC_HEIGHT(x) ((x) << 16) > > +#define YHGCH_CRT_VERT_SYNC_HEIGHT_MASK 0x3F0000 > > + > > +#define YHGCH_CRT_VERT_SYNC_START(x) ((x) << 0) > > +#define YHGCH_CRT_VERT_SYNC_START_MASK 0x7FF > > + > > +/* Hardware Cursor */ > > +#define YHGCH_HWC_ADDRESS 0x080230 > > +#define YHGCH_HWC_ADDRESS_ENABLE(x) ((x) << 31) > > +#define YHGCH_HWC_ADDRESS_ENABLE_MASK 0x80000000 > > +#define YHGCH_HWC_ADDRESS_ADDRESS(x) ((x) << 0) > > +#define YHGCH_HWC_ADDRESS_ADDRESS_MASK 0xFFFFFFF > > + > > +#define YHGCH_HWC_LOCATION 0x080234 > > +#define YHGCH_HWC_LOCATION_TOP(x) ((x) << 27) > > +#define YHGCH_HWC_LOCATION_TOP_MASK 0x8000000 > > +#define YHGCH_HWC_LOCATION_Y(x) ((x) << 16) > > +#define YHGCH_HWC_LOCATION_Y_MASK 0x7FF0000 > > +#define YHGCH_HWC_LOCATION_LEFT(x) ((x) << 11) > > +#define YHGCH_HWC_LOCATION_LEFT_MASK 0x800 > > +#define YHGCH_HWC_LOCATION_X(x) ((x) << 0) > > +#define YHGCH_HWC_LOCATION_X_MASK 0x7FF > > + > > +#define YHGCH_HWC_COLOR_12 0x080238 > > +#define YHGCH_HWC_COLOR_12_2_RGB(x) ((x) << 16) > > +#define YHGCH_HWC_COLOR_12_2_RGB_MASK 0xFFFF0000 > > +#define YHGCH_HWC_COLOR_12_1_RGB(x) ((x) << 0) > > +#define YHGCH_HWC_COLOR_12_1_RGB_MASK 0xFFFF > > + > > +#define YHGCH_HWC_COLOR_3 0x08023C > > +#define YHGCH_HWC_COLOR_3_RGB(x) ((x) << 0) > > +#define YHGCH_HWC_COLOR_3_RGB_MASK 0xFFFF > > + > > +/* Auto Centering */ > > +#define YHGCH_CRT_AUTO_CENTERING_TL 0x080280 > > +#define YHGCH_CRT_AUTO_CENTERING_TL_TOP(x) ((x) << 16) > > +#define YHGCH_CRT_AUTO_CENTERING_TL_TOP_MASK 0x7FF0000 > > + > > +#define YHGCH_CRT_AUTO_CENTERING_TL_LEFT(x) ((x) << 0) > > +#define YHGCH_CRT_AUTO_CENTERING_TL_LEFT_MASK 0x7FF > > + > > +#define YHGCH_CRT_AUTO_CENTERING_BR 0x080284 > > +#define YHGCH_CRT_AUTO_CENTERING_BR_BOTTOM(x) ((x) << 16) > > +#define YHGCH_CRT_AUTO_CENTERING_BR_BOTTOM_MASK 0x7FF0000 > > + > > +#define YHGCH_CRT_AUTO_CENTERING_BR_RIGHT(x) ((x) << 0) > > +#define YHGCH_CRT_AUTO_CENTERING_BR_RIGHT_MASK 0x7FF > > + > > +/* register to control panel output */ > > +#define YHGCH_DISPLAY_CONTROL_HISILE 0x80288 > > +#define YHGCH_DISPLAY_CONTROL_FPVDDEN(x) ((x) << 0) > > +#define YHGCH_DISPLAY_CONTROL_PANELDATE(x) ((x) << 1) > > +#define YHGCH_DISPLAY_CONTROL_FPEN(x) ((x) << 2) > > +#define YHGCH_DISPLAY_CONTROL_VBIASEN(x) ((x) << 3) > > + > > +#define YHGCH_RAW_INTERRUPT 0x80290 > > +#define YHGCH_RAW_INTERRUPT_VBLANK(x) ((x) << 2) > > +#define YHGCH_RAW_INTERRUPT_VBLANK_MASK 0x4 > > + > > +#define YHGCH_RAW_INTERRUPT_EN 0x80298 > > +#define YHGCH_RAW_INTERRUPT_EN_VBLANK(x) ((x) << 2) > > +#define YHGCH_RAW_INTERRUPT_EN_VBLANK_MASK 0x4 > > + > > +/* register and values for PLL control */ > > +#define CRT_PLL1_NS 0x802a8 > > +#define CRT_PLL1_NS_OUTER_BYPASS(x) ((x) << 30) > > +#define CRT_PLL1_NS_INTER_BYPASS(x) ((x) << 29) > > +#define CRT_PLL1_NS_POWERON(x) ((x) << 24) > > + > > +#define CRT_PLL1_NS_25MHZ 0x00006691 //640x480 > > +#define CRT_PLL1_NS_40MHZ 0x00004580 //800x600 > > +#define CRT_PLL1_NS_65MHZ 0x00002568 //1024x768 > > +#define CRT_PLL1_NS_83MHZ 0x000027bb //1280x800 > > +#define CRT_PLL1_NS_106MHZ 0x000027ef //1440x900 > > +#define CRT_PLL1_NS_108MHZ 0x000027f2 //1280x1024 > > +#define CRT_PLL1_NS_146MHZ 0x00001575 //1680x1050 > > +#define CRT_PLL1_NS_148MHZ 0x0000145f //1920x1080 > > +#define CRT_PLL1_NS_193MHZ 0x000018f7 //1920x1200 > > + > > +#define CRT_PLL2_NS 0x802ac > > +#define CRT_PLL2_NS_25MHZ 0x0 > > +#define CRT_PLL2_NS_40MHZ 0x0 > > +#define CRT_PLL2_NS_65MHZ 0x0 > > +#define CRT_PLL2_NS_83MHZ 0x0 > > +#define CRT_PLL2_NS_106MHZ 0x0 > > +#define CRT_PLL2_NS_108MHZ 0x0 > > +#define CRT_PLL2_NS_146MHZ 0x0 > > +#define CRT_PLL2_NS_148MHZ 0x0 > > +#define CRT_PLL2_NS_193MHZ 0x0 > > + > > +#endif > > diff --git a/drivers/gpu/drm/yhgch/yhgch_drm_vdac.c > > b/drivers/gpu/drm/yhgch/yhgch_drm_vdac.c > > new file mode 100644 > > index 000000000000..5f4dd8700c8a > > --- /dev/null > > +++ b/drivers/gpu/drm/yhgch/yhgch_drm_vdac.c > > @@ -0,0 +1,121 @@ > > +// SPDX-License-Identifier: GPL-2.0 > > + > > +#include <linux/io.h> > > + > > +#include <drm/drm_atomic_helper.h> > > +#include <drm/drm_edid.h> > > +#include <drm/drm_probe_helper.h> > > +#include <drm/drm_print.h> > > +#include <drm/drm_simple_kms_helper.h> > > + > > +#include "yhgch_drm_drv.h" > > +#include "yhgch_drm_regs.h" > > + > > +static int yhgch_connector_get_modes(struct drm_connector *connector) > > +{ > > + int count; > > + const struct drm_edid *drm_edid; > > + > > + if (!drm_probe_ddc(connector->ddc)) > > + drm_err(connector->dev, "smidebug: not find !!!\n"); > > not find what? Answer: The test shows that DDC successfully reads the EDID, and smidebug has been deleted. > > > + > > + drm_edid = drm_edid_read(connector); > > + if (drm_edid) { > > + drm_edid_connector_update(connector, drm_edid); > > + count = drm_edid_connector_add_modes(connector); > > + if (count) > > + goto out; > > + } > > + > > + count = drm_add_modes_noedid(connector, > > + connector->dev->mode_config.max_width, > > + connector->dev->mode_config.max_height); > > Let DRM core handle this for you. It already adds several default modes. > Answer: When the DRM core fails to retrieve the EDID, it adds several default modes. However, the required mode for our display is not included in these added default modes. Therefore, we use drm_add_modes_noedid to add some modes that meet our needs. > > + drm_set_preferred_mode(connector, 1024, 768); > > + > > +out: > > + drm_edid_free(drm_edid); > > + return count; > > +} > > + > > +static int yhgch_connector_helper_detect_from_ddc(struct drm_connector > *connector, > > + struct drm_modeset_acquire_ctx *ctx, > > + bool force) > > +{ > > + if (drm_connector_helper_detect_from_ddc(connector, ctx, force) > > + != connector_status_connected) { > > + drm_err(connector->dev, "smidebug: ddc detect failed, force > > +connect\n"); > > Don't be spammy for no reason. drm_dbg_kms(). > Answer:It has been modified. > > + } > > + return connector_status_connected; > > +} > > + > > +static const struct drm_connector_helper_funcs > > + yhgch_connector_helper_funcs = { > > move to the previous line. > Answer: It has been moved to the previous line. > > + .get_modes = yhgch_connector_get_modes, > > + .detect_ctx = yhgch_connector_helper_detect_from_ddc, > > +}; > > + > > +static const struct drm_connector_funcs yhgch_connector_funcs = { > > + .fill_modes = drm_helper_probe_single_connector_modes, > > + .destroy = drm_connector_cleanup, > > + .reset = drm_atomic_helper_connector_reset, > > + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, > > + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, > > +}; > > + > > +static void yhgch_encoder_enable(struct drm_encoder *encoder) { > > + u32 reg; > > + struct drm_device *dev = encoder->dev; > > + struct yhgch_drm_private *priv = to_yhgch_drm_private(dev); > > + > > + reg = readl(priv->mmio + YHGCH_DISPLAY_CONTROL_HISILE); > > + reg |= YHGCH_DISPLAY_CONTROL_FPVDDEN(1); > > + reg |= YHGCH_DISPLAY_CONTROL_PANELDATE(1); > > + reg |= YHGCH_DISPLAY_CONTROL_FPEN(1); > > + reg |= YHGCH_DISPLAY_CONTROL_VBIASEN(1); > > + writel(reg, priv->mmio + YHGCH_DISPLAY_CONTROL_HISILE); } > > + > > +static const struct drm_encoder_helper_funcs yhgch_encoder_helper_funcs > = { > > + .enable = yhgch_encoder_enable, > > Add disable() or comment why there is none. > Answer:The callback for .disable has been added. > > +}; > > + > > +int yhgch_vdac_init(struct yhgch_drm_private *priv) { > > + struct drm_device *dev = &priv->dev; > > + struct drm_encoder *encoder = &priv->encoder; > > + struct drm_crtc *crtc = &priv->crtc; > > + struct drm_connector *connector = &priv->connector; > > + struct i2c_adapter *ddc; > > + int ret; > > + > > + ddc = yhgch_ddc_create(priv); > > + if (IS_ERR(ddc)) { > > + ret = PTR_ERR(ddc); > > + drm_err(dev, "failed to create ddc: %d\n", ret); > > + return ret; > > + } > > + > > + encoder->possible_crtcs = drm_crtc_mask(crtc); > > + ret = drmm_encoder_init(dev, encoder, NULL, > DRM_MODE_ENCODER_DAC, NULL); > > + if (ret) { > > + drm_err(dev, "failed to init encoder: %d\n", ret); > > + return ret; > > + } > > + > > + drm_encoder_helper_add(encoder, &yhgch_encoder_helper_funcs); > > + > > + ret = drm_connector_init_with_ddc(dev, connector, > > + &yhgch_connector_funcs, > > + DRM_MODE_CONNECTOR_VGA, > > + ddc); > > + if (ret) { > > + drm_err(dev, "failed to init connector: %d\n", ret); > > + return ret; > > + } > > + drm_connector_helper_add(connector, > &yhgch_connector_helper_funcs); > > + > > + drm_connector_attach_encoder(connector, encoder); > > + > > + return 0; > > +} > > -- > > 2.43.5 > > > > -- > With best wishes > Dmitry Best Regards, Chu Guangqing ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH v5 1/1] [DRIVER] gpu: drm: add support for Yhgc ZX1000 soc chipset 2025-09-25 9:17 ` [PATCH v5 1/1] " Chu Guangqing 2025-09-25 22:20 ` Dmitry Baryshkov @ 2025-09-27 20:40 ` kernel test robot 1 sibling, 0 replies; 22+ messages in thread From: kernel test robot @ 2025-09-27 20:40 UTC (permalink / raw) To: Chu Guangqing, tzimmermann, maarten.lankhorst, mripard, airlied, simona, dmitry.baryshkov Cc: oe-kbuild-all, linux-kernel, dri-devel, Chu Guangqing Hi Chu, kernel test robot noticed the following build warnings: [auto build test WARNING on drm-misc/drm-misc-next] [also build test WARNING on linus/master v6.17-rc7] [cannot apply to next-20250926] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in https://git-scm.com/docs/git-format-patch#_base_tree_information] url: https://github.com/intel-lab-lkp/linux/commits/Chu-Guangqing/gpu-drm-add-support-for-Yhgc-ZX1000-soc-chipset/20250925-172156 base: git://anongit.freedesktop.org/drm/drm-misc drm-misc-next patch link: https://lore.kernel.org/r/20250925091715.12739-2-chuguangqing%40inspur.com patch subject: [PATCH v5 1/1] [DRIVER] gpu: drm: add support for Yhgc ZX1000 soc chipset config: loongarch-randconfig-r123-20250927 (https://download.01.org/0day-ci/archive/20250928/202509280424.vdB0od7m-lkp@intel.com/config) compiler: loongarch64-linux-gcc (GCC) 13.4.0 reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20250928/202509280424.vdB0od7m-lkp@intel.com/reproduce) If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags | Reported-by: kernel test robot <lkp@intel.com> | Closes: https://lore.kernel.org/oe-kbuild-all/202509280424.vdB0od7m-lkp@intel.com/ sparse warnings: (new ones prefixed by >>) >> drivers/gpu/drm/yhgch/yhgch_drm_de.c:65:41: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void [noderef] __iomem *vaddr_iomem @@ got void *addr_base @@ drivers/gpu/drm/yhgch/yhgch_drm_de.c:65:41: sparse: expected void [noderef] __iomem *vaddr_iomem drivers/gpu/drm/yhgch/yhgch_drm_de.c:65:41: sparse: got void *addr_base >> drivers/gpu/drm/yhgch/yhgch_drm_de.c:92:41: sparse: sparse: incorrect type in argument 1 (different address spaces) @@ expected void *addr_base @@ got void [noderef] __iomem *vram_base @@ drivers/gpu/drm/yhgch/yhgch_drm_de.c:92:41: sparse: expected void *addr_base drivers/gpu/drm/yhgch/yhgch_drm_de.c:92:41: sparse: got void [noderef] __iomem *vram_base >> drivers/gpu/drm/yhgch/yhgch_drm_de.c:123:10: sparse: sparse: Initializer entry defined twice drivers/gpu/drm/yhgch/yhgch_drm_de.c:126:9: sparse: also defined here vim +65 drivers/gpu/drm/yhgch/yhgch_drm_de.c 58 59 static void yhgch_handle_damage(void *addr_base, struct iosys_map *src, 60 struct drm_framebuffer *fb, 61 struct drm_rect *clip) 62 { 63 struct iosys_map dst; 64 > 65 iosys_map_set_vaddr_iomem(&dst, addr_base); 66 iosys_map_incr(&dst, drm_fb_clip_offset(fb->pitches[0], fb->format, clip)); 67 drm_fb_memcpy(&dst, fb->pitches, src, fb, clip); 68 } 69 70 static void yhgch_plane_atomic_update(struct drm_plane *plane, 71 struct drm_atomic_state *state) 72 { 73 struct drm_plane_state *plane_state = drm_atomic_get_new_plane_state(state, plane); 74 struct drm_framebuffer *fb = plane_state->fb; 75 struct drm_plane_state *old_plane_state = drm_atomic_get_old_plane_state(state, plane); 76 struct drm_shadow_plane_state *shadow_plane_state = to_drm_shadow_plane_state(plane_state); 77 struct yhgch_drm_private *priv = to_yhgch_drm_private(plane->dev); 78 struct drm_atomic_helper_damage_iter iter; 79 struct drm_rect damage; 80 u32 reg; 81 s64 gpu_addr = 0; 82 u32 line_l; 83 84 if (!plane_state->crtc || !plane_state->fb) 85 return; 86 87 if (!plane_state->visible) 88 return; 89 90 drm_atomic_helper_damage_iter_init(&iter, old_plane_state, plane_state); 91 drm_atomic_for_each_plane_damage(&iter, &damage) { > 92 yhgch_handle_damage(priv->vram_base, shadow_plane_state->data, fb, &damage); 93 } 94 95 fb->pitches[0] = (fb->pitches[0] + 15) & ~15; 96 97 writel(gpu_addr, priv->mmio + YHGCH_CRT_FB_ADDRESS); 98 99 reg = fb->width * fb->format->cpp[0]; 100 101 line_l = fb->pitches[0]; 102 writel(FIELD_PREP(YHGCH_CRT_FB_WIDTH_WIDTH_MASK, reg) | 103 FIELD_PREP(YHGCH_CRT_FB_WIDTH_OFFS_MASK, line_l), 104 priv->mmio + YHGCH_CRT_FB_WIDTH); 105 106 /* SET PIXEL FORMAT */ 107 reg = readl(priv->mmio + YHGCH_CRT_DISP_CTL); 108 reg &= ~YHGCH_CRT_DISP_CTL_FORMAT_MASK; 109 reg |= FIELD_PREP(YHGCH_CRT_DISP_CTL_FORMAT_MASK, 110 fb->format->cpp[0] * 8 / 16); 111 writel(reg, priv->mmio + YHGCH_CRT_DISP_CTL); 112 } 113 114 static const u32 channel_formats1[] = { 115 DRM_FORMAT_RGB565, DRM_FORMAT_RGB888, 116 DRM_FORMAT_XRGB8888, 117 }; 118 119 static struct drm_plane_funcs yhgch_plane_funcs = { 120 .update_plane = drm_atomic_helper_update_plane, 121 .disable_plane = drm_atomic_helper_disable_plane, 122 .destroy = drm_plane_cleanup, > 123 .reset = drm_atomic_helper_plane_reset, 124 .atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state, 125 .atomic_destroy_state = drm_atomic_helper_plane_destroy_state, 126 DRM_GEM_SHADOW_PLANE_FUNCS, 127 }; 128 -- 0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH v5 0/1] [DRIVER] gpu: drm: add support for Yhgc ZX1000 soc chipset 2025-09-25 9:17 ` [PATCH v5 0/1] " Chu Guangqing 2025-09-25 9:17 ` [PATCH v5 1/1] " Chu Guangqing @ 2025-09-25 22:15 ` Dmitry Baryshkov 1 sibling, 0 replies; 22+ messages in thread From: Dmitry Baryshkov @ 2025-09-25 22:15 UTC (permalink / raw) To: Chu Guangqing Cc: tzimmermann, maarten.lankhorst, mripard, airlied, simona, linux-kernel, dri-devel On Thu, Sep 25, 2025 at 05:17:14PM +0800, Chu Guangqing wrote: > Hi Dmitry, > > I have read Documentation/process/submitting-patches.rst. however, the content > is quite extensive. Please point out any omissions if there are any. Most importantly, don't post new iterations as a response to the previous one. Always start a new thread. Also, please respond to the original emails instead of just posting new iteartions. > > Q:Is there a need to probe here just print an error? > A: it will be re-probe at detect_ctx It doesn't really answer the question. Please stop pulling the questions from the context. Go back to the email and answer them there. > > Q:No .disable() ? > A: yes, we have only implemented the enable function Why there is no disable() code? > > v5: > - remove extra level of subdiretories, change to driver/gpu/drm/yhgch > - remove else from > + else if (!new_plane_state->visible) > - remove extra check in function yhgch_plane_atomic_check > - remove the extra parentheses > - change the author like other modules > - use drm_edit_read function instead drm_get_edit > - remove debug info drm_warn call > - rename function name smi_connector_helper_detect_from_ddc to > yhgch_connector_helper_detect_from_ddc, remove extra return statement. > > v4: > - remove VRAM helpers from Kconfig > - use the coding style in ast/mgag200 for the DDC > - use plane_state->dst instead of crtc_h/w/x/y. > - delete duplicate framebuffer's atomic_check. > - use FIELD_PREP() directly. > - use dev->mode_config. > - delete unnecessary drm_atomic_helper_shutdown call > - add AUTHOR > - using .enable instead > (https://lore.kernel.org/all/20250924064954.3921-1-chuguangqing@inspur.com/) > > v3: > - The order of the code blocks has been adjusted, and the "warn-on" branch > has been removed. > - removed the related formats for the alpha channel. > - removed the atomic_flush function. > - have removed the empty line. > - have removed the error message here. > - replaced it with the drmm_encoder_init function. > (https://lore.kernel.org/all/20250910022311.2655-1-chuguangqing@inspur.com/) > > v2: > - Delete unnecessary comments > - Delete unnecessary branch > - Use drm_atomic_helper_check_plane_state > - remove the alpha formats form this list. > - use w,h rather than x, y > - delete type casting > - use a simple call to drm_atomic_helper_shutdown() > - delete yhgch_load function > - delete vblanking code > - delete unneeded i2c type > (https://lore.kernel.org/all/20250903054533.68540-1-chuguangqing@inspur.com/) > > v1: > (https://lore.kernel.org/all/20250808053508.52202-1-chuguangqing@inspur.com/) > > Chu Guangqing (1): > [DRIVER] gpu: drm: add support for Yhgc ZX1000 soc chipset > > MAINTAINERS | 5 + > drivers/gpu/drm/Kconfig | 2 + > drivers/gpu/drm/Makefile | 1 + > drivers/gpu/drm/yhgch/Kconfig | 11 + > drivers/gpu/drm/yhgch/Makefile | 4 + > drivers/gpu/drm/yhgch/yhgch_drm_de.c | 415 +++++++++++++++++++++++++ > drivers/gpu/drm/yhgch/yhgch_drm_drv.c | 310 ++++++++++++++++++ > drivers/gpu/drm/yhgch/yhgch_drm_drv.h | 51 +++ > drivers/gpu/drm/yhgch/yhgch_drm_i2c.c | 114 +++++++ > drivers/gpu/drm/yhgch/yhgch_drm_regs.h | 208 +++++++++++++ > drivers/gpu/drm/yhgch/yhgch_drm_vdac.c | 121 +++++++ > 11 files changed, 1242 insertions(+) > create mode 100644 drivers/gpu/drm/yhgch/Kconfig > create mode 100644 drivers/gpu/drm/yhgch/Makefile > create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_de.c > create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_drv.c > create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_drv.h > create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_i2c.c > create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_regs.h > create mode 100644 drivers/gpu/drm/yhgch/yhgch_drm_vdac.c > > -- > 2.43.5 > -- With best wishes Dmitry ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH v4 0/1] [DRIVER] gpu: drm: add support for Yhgc ZX1000 soc chipset 2025-09-24 6:49 ` [PATCH v4 0/1] " Chu Guangqing 2025-09-24 6:49 ` [PATCH v4 1/1] " Chu Guangqing @ 2025-09-25 4:04 ` Dmitry Baryshkov 1 sibling, 0 replies; 22+ messages in thread From: Dmitry Baryshkov @ 2025-09-25 4:04 UTC (permalink / raw) To: Chu Guangqing Cc: tzimmermann, maarten.lankhorst, mripard, airlied, simona, linux-kernel, dri-devel On Wed, Sep 24, 2025 at 02:49:53PM +0800, Chu Guangqing wrote: > Sorry, Thomas. The changes have been made this time. > > >Hi > > > >Am 10.09.25 um 04:23 schrieb Chu Guangqing: > >> + select DRM_VRAM_HELPER > >> + select DRM_TTM_HELPER > > > >I told you twice that VRAM helpers are obsolete and what to use instead. > > > It has been modified. > >> + > >> +struct yhgch_vdac { > >> + struct drm_connector base; > >> + struct i2c_adapter adapter; > >> + struct i2c_algo_bit_data bit_data; > >> +}; > > > >I've asked you several times whether to adopt the coding style in > >ast/mgag200 for the DDC. > It has been modified. > > > >No only that you not respond to to any of my reviews, you keep on submitting the same code again and again. Linux kernel development does not work like that. > > > >NAK on this driver until you get your act together. > > > >Best regards > >Thomas > > > > to Dmitry: > 1. use plane_state->dst instead of crtc_h/w/x/y. > 2. delete duplicate framebuffer's atomic_check. > 3. use FIELD_PREP() directly. > 4. use dev->mode_config. > 5. delete unnecessary drm_atomic_helper_shutdown call > 6. add AUTHOR > 7. using .enable instead Please read Documentation/process/submitting-patches.rst. > > Chu Guangqing (1): > [DRIVER] gpu: drm: add support for Yhgc ZX1000 soc chipset > > MAINTAINERS | 5 + > drivers/gpu/drm/Kconfig | 2 + > drivers/gpu/drm/Makefile | 1 + > drivers/gpu/drm/yhgch/yhgch-drm/Kconfig | 11 + > drivers/gpu/drm/yhgch/yhgch-drm/Makefile | 4 + > .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_de.c | 423 ++++++++++++++++++ > .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.c | 310 +++++++++++++ > .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.h | 51 +++ > .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_i2c.c | 114 +++++ > .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_regs.h | 208 +++++++++ > .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_vdac.c | 123 +++++ > 11 files changed, 1252 insertions(+) > create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/Kconfig > create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/Makefile > create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_de.c > create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.c > create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.h > create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_i2c.c > create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_regs.h > create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_vdac.c > > -- > 2.43.5 > -- With best wishes Dmitry ^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH v1] [PATCH 0/1] add Yhgch soc chipset support - Supplementary Cc simona 2025-08-08 5:35 [PATCH 0/1] add Yhgch soc chipset support chuguangqing 2025-08-08 5:35 ` [PATCH 1/1] [DRIVER] gpu: drm: add support for Yhgc ZX1000 soc chipset chuguangqing @ 2025-08-08 7:15 ` chuguangqing 2025-08-08 7:15 ` [PATCH 0/1] add Yhgch soc chipset support chuguangqing 1 sibling, 1 reply; 22+ messages in thread From: chuguangqing @ 2025-08-08 7:15 UTC (permalink / raw) To: maarten.lankhorst, mripard, tzimmermann, airlied, simona Cc: linux-kernel, dri-devel I'm sorry that I misspelled your email address when sending the patch regarding "[Original Patch Subject]" earlier. I'm now forwarding the patch to you as a supplement, so that you can review it and provide your comments. The content of the original patch is as follows (or directly attach the full text/link of the original patch): https://lore.kernel.org/all/20250808053508.52202-1-chuguangqing@inspur.com/T/#t Looking forward to your reply, Thank you! chuguangqing ^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH 0/1] add Yhgch soc chipset support 2025-08-08 7:15 ` [PATCH v1] [PATCH 0/1] add Yhgch soc chipset support - Supplementary Cc simona chuguangqing @ 2025-08-08 7:15 ` chuguangqing 0 siblings, 0 replies; 22+ messages in thread From: chuguangqing @ 2025-08-08 7:15 UTC (permalink / raw) To: maarten.lankhorst, mripard, tzimmermann, airlied, simona Cc: linux-kernel, dri-devel, chuguangqing add Yhgch soc chipset support for Yhgch BMC chipset chuguangqing (1): [DRIVER] gpu: drm: add support for Yhgc ZX1000 soc chipset MAINTAINERS | 5 + drivers/gpu/drm/Kconfig | 2 + drivers/gpu/drm/Makefile | 1 + drivers/gpu/drm/yhgch/Kconfig | 5 + drivers/gpu/drm/yhgch/Makefile | 4 + drivers/gpu/drm/yhgch/yhgch-drm/Kconfig | 12 + drivers/gpu/drm/yhgch/yhgch-drm/Makefile | 20 + .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_de.c | 458 ++++++++++++++++++ .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.c | 374 ++++++++++++++ .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.h | 53 ++ .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_i2c.c | 89 ++++ .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_regs.h | 209 ++++++++ .../gpu/drm/yhgch/yhgch-drm/yhgch_drm_vdac.c | 116 +++++ 13 files changed, 1348 insertions(+) create mode 100644 drivers/gpu/drm/yhgch/Kconfig create mode 100644 drivers/gpu/drm/yhgch/Makefile create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/Kconfig create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/Makefile create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_de.c create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.c create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_drv.h create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_i2c.c create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_regs.h create mode 100644 drivers/gpu/drm/yhgch/yhgch-drm/yhgch_drm_vdac.c -- 2.43.5 ^ permalink raw reply [flat|nested] 22+ messages in thread
end of thread, other threads:[~2025-09-28 6:06 UTC | newest] Thread overview: 22+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2025-08-08 5:35 [PATCH 0/1] add Yhgch soc chipset support chuguangqing 2025-08-08 5:35 ` [PATCH 1/1] [DRIVER] gpu: drm: add support for Yhgc ZX1000 soc chipset chuguangqing 2025-08-27 9:17 ` Thomas Zimmermann 2025-09-03 5:45 ` [PATCH v2 0/1] " chuguangqing 2025-09-03 5:45 ` [PATCH v2 1/1] " chuguangqing 2025-09-04 11:19 ` Thomas Zimmermann 2025-09-10 2:23 ` [PATCH v3 0/1] " Chu Guangqing 2025-09-10 2:23 ` [PATCH v3 1/1] [DRIVER] " Chu Guangqing 2025-09-11 0:44 ` Dmitry Baryshkov 2025-09-11 7:25 ` Thomas Zimmermann 2025-09-24 6:49 ` [PATCH v4 0/1] " Chu Guangqing 2025-09-24 6:49 ` [PATCH v4 1/1] " Chu Guangqing 2025-09-25 4:15 ` Dmitry Baryshkov 2025-09-25 9:17 ` [PATCH v5 0/1] " Chu Guangqing 2025-09-25 9:17 ` [PATCH v5 1/1] " Chu Guangqing 2025-09-25 22:20 ` Dmitry Baryshkov 2025-09-28 6:05 ` [PATCH v5 1/1] [DRIVER] gpu: drm: add support for Yhgc ZX1000 soc Chu Guangqing 2025-09-27 20:40 ` [PATCH v5 1/1] [DRIVER] gpu: drm: add support for Yhgc ZX1000 soc chipset kernel test robot 2025-09-25 22:15 ` [PATCH v5 0/1] " Dmitry Baryshkov 2025-09-25 4:04 ` [PATCH v4 " Dmitry Baryshkov 2025-08-08 7:15 ` [PATCH v1] [PATCH 0/1] add Yhgch soc chipset support - Supplementary Cc simona chuguangqing 2025-08-08 7:15 ` [PATCH 0/1] add Yhgch soc chipset support chuguangqing
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.