[PATCH 07/11] rvtrace: Add trace ramsink driver

[Anup Patel <apatel@ventanamicro.com>]

From: Mayuresh Chitale <mchitale@ventanamicro.com>

Add initial implementation of RISC-V trace ramsink driver. The ramsink
is defined in the RISC-V Trace Control Interface specification.

Co-developed-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
---
 drivers/hwtracing/rvtrace/Kconfig           |   8 +
 drivers/hwtracing/rvtrace/Makefile          |   1 +
 drivers/hwtracing/rvtrace/rvtrace-ramsink.c | 198 ++++++++++++++++++++
 3 files changed, 207 insertions(+)
 create mode 100644 drivers/hwtracing/rvtrace/rvtrace-ramsink.c

diff --git a/drivers/hwtracing/rvtrace/Kconfig b/drivers/hwtracing/rvtrace/Kconfig
index ba35c05f3f54..aef7e9989165 100644
--- a/drivers/hwtracing/rvtrace/Kconfig
+++ b/drivers/hwtracing/rvtrace/Kconfig
@@ -21,3 +21,11 @@ config RVTRACE_ENCODER
 	default y
 	help
 	  This driver provides support for RISC-V Trace Encoder component.
+
+config RVTRACE_RAMSINK
+	tristate "RISC-V Trace Ramsink driver"
+	depends on RVTRACE
+	default y
+	help
+	  This driver provides support for Risc-V E-Trace Ramsink
+	  component.
diff --git a/drivers/hwtracing/rvtrace/Makefile b/drivers/hwtracing/rvtrace/Makefile
index f320693a1fc5..122e575da9fb 100644
--- a/drivers/hwtracing/rvtrace/Makefile
+++ b/drivers/hwtracing/rvtrace/Makefile
@@ -3,3 +3,4 @@
 obj-$(CONFIG_RVTRACE) += rvtrace.o
 rvtrace-y := rvtrace-core.o rvtrace-platform.o
 obj-$(CONFIG_RVTRACE_ENCODER) += rvtrace-encoder.o
+obj-$(CONFIG_RVTRACE_RAMSINK) += rvtrace-ramsink.o
diff --git a/drivers/hwtracing/rvtrace/rvtrace-ramsink.c b/drivers/hwtracing/rvtrace/rvtrace-ramsink.c
new file mode 100644
index 000000000000..7bd0cf1e4dfd
--- /dev/null
+++ b/drivers/hwtracing/rvtrace/rvtrace-ramsink.c
@@ -0,0 +1,198 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2025 Ventana Micro Systems Inc.
+ */
+
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_graph.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/dma-mapping.h>
+#include <linux/rvtrace.h>
+#include <linux/types.h>
+#include <linux/sizes.h>
+
+#define RVTRACE_RAMSINK_STARTLOW_OFF		0x010
+#define RVTRACE_RAMSINK_STARTHIGH_OFF		0x014
+#define RVTRACE_RAMSINK_LIMITLOW_OFF		0x018
+#define RVTRACE_RAMSINK_LIMITHIGH_OFF		0x01c
+#define RVTRACE_RAMSINK_WPLOW_OFF		0x020
+#define RVTRACE_RAMSINK_WPHIGH_OFF		0x024
+#define RVTRACE_RAMSINK_RPLOW_OFF		0x028
+#define RVTRACE_RAMSINK_RPHIGH_OFF		0x02c
+
+struct rvtrace_ramsink_priv {
+	size_t size;
+	void *va;
+	dma_addr_t start;
+	dma_addr_t end;
+	/* WP from prev iteration */
+	dma_addr_t prev_head;
+};
+
+struct trace_buf {
+	void *base;
+	size_t size;
+	int cur, len;
+};
+
+static void tbuf_to_pbuf_copy(struct trace_buf *src, struct trace_buf *dst)
+{
+	int bytes_dst, bytes_src, bytes;
+	void *dst_addr, *src_addr;
+
+	while (src->size) {
+		src_addr = src->base + src->cur;
+		dst_addr = dst->base + dst->cur;
+
+		if (dst->len - dst->cur < src->size)
+			bytes_dst = dst->len - dst->cur;
+		else
+			bytes_dst = src->size;
+		if (src->len - src->cur < src->size)
+			bytes_src = src->len - src->cur;
+		else
+			bytes_src = src->size;
+		bytes = bytes_dst < bytes_src ? bytes_dst : bytes_src;
+		memcpy(dst_addr, src_addr, bytes);
+		dst->cur = (dst->cur + bytes) % dst->len;
+		src->cur = (src->cur + bytes) % src->len;
+		src->size -= bytes;
+	}
+}
+
+static size_t rvtrace_ramsink_copyto_auxbuf(struct rvtrace_component *comp,
+					    struct rvtrace_perf_auxbuf *buf)
+{
+	struct rvtrace_ramsink_priv *priv = dev_get_drvdata(&comp->dev);
+	struct trace_buf src, dst;
+	u32 wp_low, wp_high;
+	u64 buf_cur_head;
+	size_t size;
+
+	wp_low = rvtrace_read32(comp->pdata, RVTRACE_RAMSINK_WPLOW_OFF);
+	wp_high = rvtrace_read32(comp->pdata, RVTRACE_RAMSINK_WPHIGH_OFF);
+	buf_cur_head = (u64)(wp_high) << 32 | wp_low;
+
+	if (buf_cur_head == priv->prev_head)
+		return 0;
+
+	dst.base = buf->base;
+	dst.len = buf->length;
+	dst.cur = buf->pos;
+	dst.size = 0;
+
+	src.base = priv->va;
+	src.len = priv->end - priv->start;
+	if (buf_cur_head > priv->prev_head) {
+		src.size = buf_cur_head - priv->prev_head;
+	} else {
+		src.size = priv->end - priv->prev_head;
+		src.size += buf_cur_head - priv->start;
+	}
+
+	src.cur = buf_cur_head - priv->start;
+	size = src.size;
+	tbuf_to_pbuf_copy(&src, &dst);
+	buf->pos = dst.cur;
+	priv->prev_head = buf_cur_head;
+
+	return size;
+}
+
+static int rvtrace_ramsink_setup(struct rvtrace_component *comp)
+{
+	struct rvtrace_ramsink_priv *priv;
+
+	priv = devm_kzalloc(&comp->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+	dev_set_drvdata(&comp->dev, priv);
+
+	priv->size = SZ_4M;
+	priv->va = dma_alloc_coherent(&comp->dev, priv->size, &priv->start, GFP_KERNEL);
+	if (!priv->va)
+		return -ENOMEM;
+	priv->end = priv->start + priv->size;
+	priv->prev_head = priv->start;
+
+	/* Setup ram sink addresses */
+	rvtrace_write32(comp->pdata, lower_32_bits(priv->start), RVTRACE_RAMSINK_STARTLOW_OFF);
+	rvtrace_write32(comp->pdata, upper_32_bits(priv->start), RVTRACE_RAMSINK_STARTHIGH_OFF);
+	rvtrace_write32(comp->pdata, lower_32_bits(priv->start), RVTRACE_RAMSINK_WPLOW_OFF);
+	rvtrace_write32(comp->pdata, upper_32_bits(priv->start), RVTRACE_RAMSINK_WPHIGH_OFF);
+	/* Limit address needs to be set to end - 4 so that HW doesn't cause an overflow. */
+	rvtrace_write32(comp->pdata, lower_32_bits(priv->end - 0x4), RVTRACE_RAMSINK_LIMITLOW_OFF);
+	rvtrace_write32(comp->pdata, upper_32_bits(priv->end), RVTRACE_RAMSINK_LIMITHIGH_OFF);
+
+	return 0;
+}
+
+static void rvtrace_ramsink_cleanup(struct rvtrace_component *comp)
+{
+	struct rvtrace_ramsink_priv *priv = dev_get_drvdata(&comp->dev);
+
+	dma_free_coherent(&comp->dev, priv->size, priv->va, priv->start);
+}
+
+static int rvtrace_ramsink_probe(struct rvtrace_component *comp)
+{
+	int ret;
+
+	ret = rvtrace_ramsink_setup(comp);
+	if (ret)
+		return dev_err_probe(&comp->dev, ret, "failed to setup ramsink.\n");
+
+	ret = rvtrace_enable_component(comp);
+	if (ret)
+		return dev_err_probe(&comp->dev, ret, "failed to enable ramsink.\n");
+
+	return ret;
+}
+
+static void rvtrace_ramsink_remove(struct rvtrace_component *comp)
+{
+	int ret;
+
+	ret = rvtrace_disable_component(comp);
+	if (ret)
+		dev_err(&comp->dev, "failed to disable ramsink.\n");
+
+	rvtrace_ramsink_cleanup(comp);
+}
+
+static struct rvtrace_component_id rvtrace_ramsink_ids[] = {
+	{ .type = RVTRACE_COMPONENT_TYPE_RAMSINK,
+	  .version = rvtrace_component_mkversion(1, 0), },
+	{},
+};
+
+static struct rvtrace_driver rvtrace_ramsink_driver = {
+	.id_table = rvtrace_ramsink_ids,
+	.copyto_auxbuf = rvtrace_ramsink_copyto_auxbuf,
+	.probe = rvtrace_ramsink_probe,
+	.remove = rvtrace_ramsink_remove,
+	.driver = {
+		.name = "rvtrace-ramsink",
+	},
+};
+
+static int __init rvtrace_ramsink_init(void)
+{
+	return rvtrace_register_driver(&rvtrace_ramsink_driver);
+}
+
+static void __exit rvtrace_ramsink_exit(void)
+{
+	rvtrace_unregister_driver(&rvtrace_ramsink_driver);
+}
+
+module_init(rvtrace_ramsink_init);
+module_exit(rvtrace_ramsink_exit);
+
+/* Module information */
+MODULE_AUTHOR("Mayuresh Chitale <mchitale@ventanamicro.com>");
+MODULE_DESCRIPTION("RISC-V Trace Ramsink Driver");
+MODULE_LICENSE("GPL");
-- 
2.43.0


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv