All of lore.kernel.org
 help / color / mirror / Atom feed
From: E Shattow <e@freeshell.de>
To: Emil Renner Berthing <kernel@esmil.dk>,
	Conor Dooley <conor@kernel.org>, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Paul Walmsley <pjw@kernel.org>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Albert Ou <aou@eecs.berkeley.edu>,
	Alexandre Ghiti <alex@ghiti.fr>
Cc: E Shattow <e@freeshell.de>,
	linux-riscv@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH] dts: starfive: jh7110-common: split out mmc0 reset pins from common into boards
Date: Sun,  5 Oct 2025 10:44:28 -0700	[thread overview]
Message-ID: <20251005174450.1949110-1-e@freeshell.de> (raw)

Prepare for Orange Pi RV using jh7110-common.dtsi having GPIO62 assignment
different than mmc0 reset by splitting this out into each board dts.

Signed-off-by: E Shattow <e@freeshell.de>
---
 arch/riscv/boot/dts/starfive/jh7110-common.dtsi     | 11 -----------
 .../dts/starfive/jh7110-deepcomputing-fml13v01.dts  | 13 +++++++++++++
 arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts  | 13 +++++++++++++
 .../boot/dts/starfive/jh7110-milkv-marscm.dtsi      | 13 +++++++++++++
 .../boot/dts/starfive/jh7110-pine64-star64.dts      | 13 +++++++++++++
 .../dts/starfive/jh7110-starfive-visionfive-2.dtsi  | 13 +++++++++++++
 6 files changed, 65 insertions(+), 11 deletions(-)

diff --git a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
index 5dc15e48b74b..083ec80b4e44 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
@@ -444,17 +444,6 @@ GPOEN_SYS_I2C6_DATA,
 	};
 
 	mmc0_pins: mmc0-0 {
-		 rst-pins {
-			pinmux = <GPIOMUX(62, GPOUT_SYS_SDIO0_RST,
-					      GPOEN_ENABLE,
-					      GPI_NONE)>;
-			bias-pull-up;
-			drive-strength = <12>;
-			input-disable;
-			input-schmitt-disable;
-			slew-rate = <0>;
-		};
-
 		mmc-pins {
 			pinmux = <PINMUX(PAD_SD0_CLK, 0)>,
 				 <PINMUX(PAD_SD0_CMD, 0)>,
diff --git a/arch/riscv/boot/dts/starfive/jh7110-deepcomputing-fml13v01.dts b/arch/riscv/boot/dts/starfive/jh7110-deepcomputing-fml13v01.dts
index f2857d021d68..0243e54a84ed 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-deepcomputing-fml13v01.dts
+++ b/arch/riscv/boot/dts/starfive/jh7110-deepcomputing-fml13v01.dts
@@ -11,6 +11,19 @@ / {
 	compatible = "deepcomputing,fml13v01", "starfive,jh7110";
 };
 
+&mmc0_pins {
+	 rst-pins {
+		pinmux = <GPIOMUX(62, GPOUT_SYS_SDIO0_RST,
+				      GPOEN_ENABLE,
+				      GPI_NONE)>;
+		bias-pull-up;
+		drive-strength = <12>;
+		input-disable;
+		input-schmitt-disable;
+		slew-rate = <0>;
+	};
+};
+
 &pcie1 {
 	perst-gpios = <&sysgpio 21 GPIO_ACTIVE_LOW>;
 	phys = <&pciephy1>;
diff --git a/arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts b/arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts
index fdaf6b4557da..5ca10597dcd9 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts
+++ b/arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts
@@ -22,6 +22,19 @@ &i2c0 {
 	status = "okay";
 };
 
+&mmc0_pins {
+	 rst-pins {
+		pinmux = <GPIOMUX(62, GPOUT_SYS_SDIO0_RST,
+				      GPOEN_ENABLE,
+				      GPI_NONE)>;
+		bias-pull-up;
+		drive-strength = <12>;
+		input-disable;
+		input-schmitt-disable;
+		slew-rate = <0>;
+	};
+};
+
 &pcie0 {
 	status = "okay";
 };
diff --git a/arch/riscv/boot/dts/starfive/jh7110-milkv-marscm.dtsi b/arch/riscv/boot/dts/starfive/jh7110-milkv-marscm.dtsi
index 25b70af564ee..025471061d43 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-milkv-marscm.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110-milkv-marscm.dtsi
@@ -40,6 +40,19 @@ &i2c6 {
 	status = "disabled";
 };
 
+&mmc0_pins {
+	 rst-pins {
+		pinmux = <GPIOMUX(62, GPOUT_SYS_SDIO0_RST,
+				      GPOEN_ENABLE,
+				      GPI_NONE)>;
+		bias-pull-up;
+		drive-strength = <12>;
+		input-disable;
+		input-schmitt-disable;
+		slew-rate = <0>;
+	};
+};
+
 &mmc1 {
 	#address-cells = <1>;
 	#size-cells = <0>;
diff --git a/arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts b/arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts
index 31e825be2065..980e24e3dbc8 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts
+++ b/arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts
@@ -44,6 +44,19 @@ &i2c0 {
 	status = "okay";
 };
 
+&mmc0_pins {
+	 rst-pins {
+		pinmux = <GPIOMUX(62, GPOUT_SYS_SDIO0_RST,
+				      GPOEN_ENABLE,
+				      GPI_NONE)>;
+		bias-pull-up;
+		drive-strength = <12>;
+		input-disable;
+		input-schmitt-disable;
+		slew-rate = <0>;
+	};
+};
+
 &pcie1 {
 	status = "okay";
 };
diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
index 5f14afb2c24d..574e128138c2 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
@@ -41,6 +41,19 @@ &mmc0 {
 	non-removable;
 };
 
+&mmc0_pins {
+	 rst-pins {
+		pinmux = <GPIOMUX(62, GPOUT_SYS_SDIO0_RST,
+				      GPOEN_ENABLE,
+				      GPI_NONE)>;
+		bias-pull-up;
+		drive-strength = <12>;
+		input-disable;
+		input-schmitt-disable;
+		slew-rate = <0>;
+	};
+};
+
 &pcie0 {
 	status = "okay";
 };

base-commit: 6093a688a07da07808f0122f9aa2a3eed250d853
-- 
2.50.0


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

WARNING: multiple messages have this Message-ID (diff)
From: E Shattow <e@freeshell.de>
To: Emil Renner Berthing <kernel@esmil.dk>,
	Conor Dooley <conor@kernel.org>, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Paul Walmsley <pjw@kernel.org>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Albert Ou <aou@eecs.berkeley.edu>,
	Alexandre Ghiti <alex@ghiti.fr>
Cc: E Shattow <e@freeshell.de>,
	linux-riscv@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH] dts: starfive: jh7110-common: split out mmc0 reset pins from common into boards
Date: Sun,  5 Oct 2025 10:44:28 -0700	[thread overview]
Message-ID: <20251005174450.1949110-1-e@freeshell.de> (raw)

Prepare for Orange Pi RV using jh7110-common.dtsi having GPIO62 assignment
different than mmc0 reset by splitting this out into each board dts.

Signed-off-by: E Shattow <e@freeshell.de>
---
 arch/riscv/boot/dts/starfive/jh7110-common.dtsi     | 11 -----------
 .../dts/starfive/jh7110-deepcomputing-fml13v01.dts  | 13 +++++++++++++
 arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts  | 13 +++++++++++++
 .../boot/dts/starfive/jh7110-milkv-marscm.dtsi      | 13 +++++++++++++
 .../boot/dts/starfive/jh7110-pine64-star64.dts      | 13 +++++++++++++
 .../dts/starfive/jh7110-starfive-visionfive-2.dtsi  | 13 +++++++++++++
 6 files changed, 65 insertions(+), 11 deletions(-)

diff --git a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
index 5dc15e48b74b..083ec80b4e44 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
@@ -444,17 +444,6 @@ GPOEN_SYS_I2C6_DATA,
 	};
 
 	mmc0_pins: mmc0-0 {
-		 rst-pins {
-			pinmux = <GPIOMUX(62, GPOUT_SYS_SDIO0_RST,
-					      GPOEN_ENABLE,
-					      GPI_NONE)>;
-			bias-pull-up;
-			drive-strength = <12>;
-			input-disable;
-			input-schmitt-disable;
-			slew-rate = <0>;
-		};
-
 		mmc-pins {
 			pinmux = <PINMUX(PAD_SD0_CLK, 0)>,
 				 <PINMUX(PAD_SD0_CMD, 0)>,
diff --git a/arch/riscv/boot/dts/starfive/jh7110-deepcomputing-fml13v01.dts b/arch/riscv/boot/dts/starfive/jh7110-deepcomputing-fml13v01.dts
index f2857d021d68..0243e54a84ed 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-deepcomputing-fml13v01.dts
+++ b/arch/riscv/boot/dts/starfive/jh7110-deepcomputing-fml13v01.dts
@@ -11,6 +11,19 @@ / {
 	compatible = "deepcomputing,fml13v01", "starfive,jh7110";
 };
 
+&mmc0_pins {
+	 rst-pins {
+		pinmux = <GPIOMUX(62, GPOUT_SYS_SDIO0_RST,
+				      GPOEN_ENABLE,
+				      GPI_NONE)>;
+		bias-pull-up;
+		drive-strength = <12>;
+		input-disable;
+		input-schmitt-disable;
+		slew-rate = <0>;
+	};
+};
+
 &pcie1 {
 	perst-gpios = <&sysgpio 21 GPIO_ACTIVE_LOW>;
 	phys = <&pciephy1>;
diff --git a/arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts b/arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts
index fdaf6b4557da..5ca10597dcd9 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts
+++ b/arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts
@@ -22,6 +22,19 @@ &i2c0 {
 	status = "okay";
 };
 
+&mmc0_pins {
+	 rst-pins {
+		pinmux = <GPIOMUX(62, GPOUT_SYS_SDIO0_RST,
+				      GPOEN_ENABLE,
+				      GPI_NONE)>;
+		bias-pull-up;
+		drive-strength = <12>;
+		input-disable;
+		input-schmitt-disable;
+		slew-rate = <0>;
+	};
+};
+
 &pcie0 {
 	status = "okay";
 };
diff --git a/arch/riscv/boot/dts/starfive/jh7110-milkv-marscm.dtsi b/arch/riscv/boot/dts/starfive/jh7110-milkv-marscm.dtsi
index 25b70af564ee..025471061d43 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-milkv-marscm.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110-milkv-marscm.dtsi
@@ -40,6 +40,19 @@ &i2c6 {
 	status = "disabled";
 };
 
+&mmc0_pins {
+	 rst-pins {
+		pinmux = <GPIOMUX(62, GPOUT_SYS_SDIO0_RST,
+				      GPOEN_ENABLE,
+				      GPI_NONE)>;
+		bias-pull-up;
+		drive-strength = <12>;
+		input-disable;
+		input-schmitt-disable;
+		slew-rate = <0>;
+	};
+};
+
 &mmc1 {
 	#address-cells = <1>;
 	#size-cells = <0>;
diff --git a/arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts b/arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts
index 31e825be2065..980e24e3dbc8 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts
+++ b/arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts
@@ -44,6 +44,19 @@ &i2c0 {
 	status = "okay";
 };
 
+&mmc0_pins {
+	 rst-pins {
+		pinmux = <GPIOMUX(62, GPOUT_SYS_SDIO0_RST,
+				      GPOEN_ENABLE,
+				      GPI_NONE)>;
+		bias-pull-up;
+		drive-strength = <12>;
+		input-disable;
+		input-schmitt-disable;
+		slew-rate = <0>;
+	};
+};
+
 &pcie1 {
 	status = "okay";
 };
diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
index 5f14afb2c24d..574e128138c2 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
@@ -41,6 +41,19 @@ &mmc0 {
 	non-removable;
 };
 
+&mmc0_pins {
+	 rst-pins {
+		pinmux = <GPIOMUX(62, GPOUT_SYS_SDIO0_RST,
+				      GPOEN_ENABLE,
+				      GPI_NONE)>;
+		bias-pull-up;
+		drive-strength = <12>;
+		input-disable;
+		input-schmitt-disable;
+		slew-rate = <0>;
+	};
+};
+
 &pcie0 {
 	status = "okay";
 };

base-commit: 6093a688a07da07808f0122f9aa2a3eed250d853
-- 
2.50.0


             reply	other threads:[~2025-10-05 17:46 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-10-05 17:44 E Shattow [this message]
2025-10-05 17:44 ` [PATCH] dts: starfive: jh7110-common: split out mmc0 reset pins from common into boards E Shattow
2025-10-20 17:36 ` Conor Dooley
2025-10-20 17:36   ` Conor Dooley

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20251005174450.1949110-1-e@freeshell.de \
    --to=e@freeshell.de \
    --cc=alex@ghiti.fr \
    --cc=aou@eecs.berkeley.edu \
    --cc=conor@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=kernel@esmil.dk \
    --cc=krzk+dt@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=palmer@dabbelt.com \
    --cc=pjw@kernel.org \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.