All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mathias Nyman <mathias.nyman@linux.intel.com>
To: <gregkh@linuxfoundation.org>
Cc: <linux-usb@vger.kernel.org>,
	Michal Pecio <michal.pecio@gmail.com>,
	Arisa Snowbell <arisa.snowbell@gmail.com>,
	Michal Kubecek <mkubecek@suse.cz>,
	Mathias Nyman <mathias.nyman@linux.intel.com>
Subject: [PATCH 1/3] usb: xhci-pci: Fix USB2-only root hub registration
Date: Tue, 14 Oct 2025 01:55:40 +0300	[thread overview]
Message-ID: <20251013225542.504072-2-mathias.nyman@linux.intel.com> (raw)
In-Reply-To: <20251013225542.504072-1-mathias.nyman@linux.intel.com>

From: Michal Pecio <michal.pecio@gmail.com>

A recent change to hide USB3 root hubs of USB2-only controllers broke
registration of USB2 root hubs - allow_single_roothub is set too late,
and by this time xhci_run() has already deferred root hub registration
until after the shared HCD is added, which will never happen.

This makes such controllers unusable, but testers didn't notice since
they were only bothered by warnings about empty USB3 root hubs. The bug
causes problems to other people who actually use such HCs and I was
able to confirm it on an ordinary HC by patching to ignore USB3 ports.

Setting allow_single_roothub during early setup fixes things.

Reported-by: Arisa Snowbell <arisa.snowbell@gmail.com>
Closes: https://lore.kernel.org/linux-usb/CABpa4MA9unucCoKtSdzJyOLjHNVy+Cwgz5AnAxPkKw6vuox1Nw@mail.gmail.com/
Reported-by: Michal Kubecek <mkubecek@suse.cz>
Closes: https://lore.kernel.org/linux-usb/lnb5bum7dnzkn3fc7gq6hwigslebo7o4ccflcvsc3lvdgnu7el@fvqpobbdoapl/
Fixes: 719de070f764 ("usb: xhci-pci: add support for hosts with zero USB3 ports")
Tested-by: Arisa Snowbell <arisa.snowbell@gmail.com>
Tested-by: Michal Kubecek <mkubecek@suse.cz>
Suggested-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
---
 drivers/usb/host/xhci-pci.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 5c8ab519f497..f67a4d956204 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -582,6 +582,8 @@ static int xhci_pci_setup(struct usb_hcd *hcd)
 	if (!usb_hcd_is_primary_hcd(hcd))
 		return 0;
 
+	xhci->allow_single_roothub = 1;
+
 	if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
 		xhci_pme_acpi_rtd3_enable(pdev);
 
@@ -637,7 +639,6 @@ int xhci_pci_common_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	xhci = hcd_to_xhci(hcd);
 	xhci->reset = reset;
 
-	xhci->allow_single_roothub = 1;
 	if (!xhci_has_one_roothub(xhci)) {
 		xhci->shared_hcd = usb_create_shared_hcd(&xhci_pci_hc_driver, &dev->dev,
 							 pci_name(dev), hcd);
-- 
2.43.0


  reply	other threads:[~2025-10-13 22:56 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-10-13 22:55 [PATCH 0/3] xhci fixes for usb-linus Mathias Nyman
2025-10-13 22:55 ` Mathias Nyman [this message]
2025-10-13 22:55 ` [PATCH 2/3] xhci: dbc: fix bogus 1024 byte prefix if ttyDBC read races with stall event Mathias Nyman
2025-10-13 22:55 ` [PATCH 3/3] xhci: dbc: enable back DbC in resume if it was enabled before suspend Mathias Nyman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20251013225542.504072-2-mathias.nyman@linux.intel.com \
    --to=mathias.nyman@linux.intel.com \
    --cc=arisa.snowbell@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=michal.pecio@gmail.com \
    --cc=mkubecek@suse.cz \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.