[PATCH 3/3] xhci: dbc: enable back DbC in resume if it was enabled before suspend

[Mathias Nyman <mathias.nyman@linux.intel.com>]

DbC is currently only enabled back if it's in configured state during
suspend.

If system is suspended after DbC is enabled, but before the device is
properly enumerated by the host, then DbC would not be enabled back in
resume.

Always enable DbC back in resume if it's suspended in enabled,
connected, or configured state

Cc: stable@vger.kernel.org
Fixes: dfba2174dc42 ("usb: xhci: Add DbC support in xHCI driver")
Tested-by: Łukasz Bartosik <ukaszb@chromium.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
---
 drivers/usb/host/xhci-dbgcap.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/host/xhci-dbgcap.c b/drivers/usb/host/xhci-dbgcap.c
index 023a8ec6f305..ecda964e018a 100644
--- a/drivers/usb/host/xhci-dbgcap.c
+++ b/drivers/usb/host/xhci-dbgcap.c
@@ -1392,8 +1392,15 @@ int xhci_dbc_suspend(struct xhci_hcd *xhci)
 	if (!dbc)
 		return 0;
 
-	if (dbc->state == DS_CONFIGURED)
+	switch (dbc->state) {
+	case DS_ENABLED:
+	case DS_CONNECTED:
+	case DS_CONFIGURED:
 		dbc->resume_required = 1;
+		break;
+	default:
+		break;
+	}
 
 	xhci_dbc_stop(dbc);
 
-- 
2.43.0