From: Stephen Hemminger <stephen@networkplumber.org>
To: vanshika.shukla@nxp.com
Cc: dev@dpdk.org
Subject: Re: [v1 00/12] ENETC4 PMD support
Date: Wed, 15 Oct 2025 15:10:20 -0700 [thread overview]
Message-ID: <20251015151020.643dcef6@hermes.local> (raw)
In-Reply-To: <20251009111633.3585957-1-vanshika.shukla@nxp.com>
On Thu, 9 Oct 2025 16:46:21 +0530
vanshika.shukla@nxp.com wrote:
> From: Vanshika Shukla <vanshika.shukla@nxp.com>
>
> This series introduces a new ENETC4 PMD driver for NXP's new generation
> SoC, enabling basic network operations.
>
> Apeksha Gupta (6):
> net/enetc: Add initial ENETC4 PMD driver support
> net/enetc: Add RX and TX queue APIs for ENETC4 PMD
> net/enetc: Optimize ENETC4 data path
> net/enetc: Add TX checksum offload and RX checksum validation
> net/enetc: Add basic statistics
> net/enetc: Add packet type parsing support
>
> Gagandeep Singh (1):
> net/enetc: Add support for multiple queues with RSS
>
> Vanshika Shukla (5):
> net/enetc: Add VF to PF messaging support and primary MAC setup
> net/enetc: Add multicast and promiscuous mode support
> net/enetc: Add link speed and status support
> net/enetc: Add link status notification support
> net/enetc: Add MAC and VLAN filter support
>
> MAINTAINERS | 3 +
> config/arm/arm64_imx_linux_gcc | 17 +
> config/arm/meson.build | 14 +
> doc/guides/nics/enetc4.rst | 92 ++
> doc/guides/nics/features/enetc4.ini | 22 +
> doc/guides/nics/index.rst | 1 +
> doc/guides/rel_notes/release_24_11.rst | 4 +
> drivers/net/enetc/base/enetc4_hw.h | 186 ++++
> drivers/net/enetc/base/enetc_hw.h | 52 +-
> drivers/net/enetc/enetc.h | 245 ++++-
> drivers/net/enetc/enetc4_ethdev.c | 1002 +++++++++++++++++
> drivers/net/enetc/enetc4_vf.c | 1364 ++++++++++++++++++++++++
> drivers/net/enetc/enetc_cbdr.c | 311 ++++++
> drivers/net/enetc/enetc_ethdev.c | 5 +-
> drivers/net/enetc/enetc_rxtx.c | 165 ++-
> drivers/net/enetc/meson.build | 5 +-
> drivers/net/enetc/ntmp.h | 110 ++
> 17 files changed, 3557 insertions(+), 41 deletions(-)
> create mode 100644 config/arm/arm64_imx_linux_gcc
> create mode 100644 doc/guides/nics/enetc4.rst
> create mode 100644 doc/guides/nics/features/enetc4.ini
> create mode 100644 drivers/net/enetc/base/enetc4_hw.h
> create mode 100644 drivers/net/enetc/enetc4_ethdev.c
> create mode 100644 drivers/net/enetc/enetc4_vf.c
> create mode 100644 drivers/net/enetc/enetc_cbdr.c
> create mode 100644 drivers/net/enetc/ntmp.h
>
Drivers often get statically linked so it is important not to have
visible symbols that can conflict.
$ nm ./drivers/librte_net_enetc.a | grep ' [TDB] ' | grep -v ' enetc'
0000000000000b80 T print_ethaddr
0000000000000520 T netc_free_cbdr
0000000000000000 T ntmp_rsst_query_or_update_entry
next prev parent reply other threads:[~2025-10-15 22:11 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-09 11:16 [v1 00/12] ENETC4 PMD support vanshika.shukla
2025-10-09 11:16 ` [v1 01/12] net/enetc: Add initial ENETC4 PMD driver support vanshika.shukla
2025-10-09 16:06 ` Hemant Agrawal
2025-10-15 21:34 ` Stephen Hemminger
2025-10-09 11:16 ` [v1 02/12] net/enetc: Add RX and TX queue APIs for ENETC4 PMD vanshika.shukla
2025-10-15 21:36 ` Stephen Hemminger
2025-10-15 21:42 ` Stephen Hemminger
2025-10-15 21:43 ` Stephen Hemminger
2025-10-15 21:50 ` Stephen Hemminger
2025-10-09 11:16 ` [v1 03/12] net/enetc: Optimize ENETC4 data path vanshika.shukla
2025-10-09 11:16 ` [v1 04/12] net/enetc: Add TX checksum offload and RX checksum validation vanshika.shukla
2025-10-09 11:16 ` [v1 05/12] net/enetc: Add basic statistics vanshika.shukla
2025-10-09 11:16 ` [v1 06/12] net/enetc: Add packet type parsing support vanshika.shukla
2025-10-09 11:16 ` [v1 07/12] net/enetc: Add support for multiple queues with RSS vanshika.shukla
2025-10-09 11:16 ` [v1 08/12] net/enetc: Add VF to PF messaging support and primary MAC setup vanshika.shukla
2025-10-15 21:53 ` Stephen Hemminger
2025-10-09 11:16 ` [v1 09/12] net/enetc: Add multicast and promiscuous mode support vanshika.shukla
2025-10-09 11:16 ` [v1 10/12] net/enetc: Add link speed and status support vanshika.shukla
2025-10-09 11:16 ` [v1 11/12] net/enetc: Add link status notification support vanshika.shukla
2025-10-09 11:16 ` [v1 12/12] net/enetc: Add MAC and VLAN filter support vanshika.shukla
2025-10-15 22:10 ` Stephen Hemminger [this message]
2025-10-17 9:19 ` [v2 00/12] ENETC4 PMD support vanshika.shukla
2025-10-17 9:19 ` [v2 01/12] net/enetc: Add initial ENETC4 PMD driver support vanshika.shukla
2025-10-17 9:19 ` [v2 02/12] net/enetc: Add RX and TX queue APIs for ENETC4 PMD vanshika.shukla
2025-10-17 9:19 ` [v2 03/12] net/enetc: Optimize ENETC4 data path vanshika.shukla
2025-10-17 9:19 ` [v2 04/12] net/enetc: Add TX checksum offload and RX checksum validation vanshika.shukla
2025-10-17 9:19 ` [v2 05/12] net/enetc: Add basic statistics vanshika.shukla
2025-10-17 9:19 ` [v2 06/12] net/enetc: Add packet type parsing support vanshika.shukla
2025-10-17 9:19 ` [v2 07/12] net/enetc: Add VF to PF messaging support and primary MAC setup vanshika.shukla
2025-10-17 9:19 ` [v2 08/12] net/enetc: Add multicast and promiscuous mode support vanshika.shukla
2025-10-17 9:19 ` [v2 09/12] net/enetc: Add link speed and status support vanshika.shukla
2025-10-17 9:19 ` [v2 10/12] net/enetc: Add link status notification support vanshika.shukla
2025-10-17 9:19 ` [v2 11/12] net/enetc: Add MAC and VLAN filter support vanshika.shukla
2025-10-17 9:19 ` [v2 12/12] net/enetc: Add support for deferred queue and queue info callbacks vanshika.shukla
2025-10-22 16:34 ` [v2 00/12] ENETC4 PMD support Stephen Hemminger
-- strict thread matches above, loose matches on Subject: below --
2024-10-18 7:26 [v1 " vanshika.shukla
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251015151020.643dcef6@hermes.local \
--to=stephen@networkplumber.org \
--cc=dev@dpdk.org \
--cc=vanshika.shukla@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.