From: Alexandre Belloni <alexandre.belloni@bootlin.com>
To: "Rob Herring (Arm)" <robh@kernel.org>
Cc: "Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Stephen Boyd" <sboyd@kernel.org>,
"Thierry Reding" <thierry.reding@gmail.com>,
"Linus Walleij" <linus.walleij@linaro.org>,
"Bartosz Golaszewski" <brgl@bgdev.pl>,
"Shawn Guo" <shawnguo@kernel.org>,
"Fabio Estevam" <festevam@gmail.com>,
"Nuno Sá" <nuno.sa@analog.com>,
"Lars-Peter Clausen" <lars@metafoo.de>,
"Michael Hennerich" <Michael.Hennerich@analog.com>,
"Jonathan Cameron" <jic23@kernel.org>,
"Andy Shevchenko" <andy@kernel.org>,
"Jassi Brar" <jassisinghbrar@gmail.com>,
"Mauro Carvalho Chehab" <mchehab@kernel.org>,
"Lee Jones" <lee@kernel.org>, "Joel Stanley" <joel@jms.id.au>,
"Andrew Jeffery" <andrew@codeconstruct.com.au>,
"Andrew Lunn" <andrew@lunn.ch>,
"Vladimir Oltean" <olteanv@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
"Eric Dumazet" <edumazet@google.com>,
"Jakub Kicinski" <kuba@kernel.org>,
"Paolo Abeni" <pabeni@redhat.com>,
"Daire McNamara" <daire.mcnamara@microchip.com>,
"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
"Krzysztof Wilczyński" <kwilczynski@kernel.org>,
"Manivannan Sadhasivam" <mani@kernel.org>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Vinod Koul" <vkoul@kernel.org>,
"Kishon Vijay Abraham I" <kishon@kernel.org>,
"Bjorn Andersson" <andersson@kernel.org>,
"Geert Uytterhoeven" <geert+renesas@glider.be>,
"Nicolas Ferre" <nicolas.ferre@microchip.com>,
"Claudiu Beznea" <claudiu.beznea@tuxon.dev>,
"Florian Fainelli" <f.fainelli@gmail.com>,
"Tony Lindgren" <tony@atomide.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-clk@vger.kernel.org, linux-gpio@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-iio@vger.kernel.org,
linux-media@vger.kernel.org, netdev@vger.kernel.org,
linux-pci@vger.kernel.org, linux-phy@lists.infradead.org
Subject: Re: [PATCH] dt-bindings: Fix inconsistent quoting
Date: Thu, 16 Oct 2025 08:49:13 +0200 [thread overview]
Message-ID: <2025101606491337a4fffe@mail.local> (raw)
In-Reply-To: <20251015232015.846282-1-robh@kernel.org>
On 15/10/2025 18:16:24-0500, Rob Herring (Arm) wrote:
> yamllint has gained a new check which checks for inconsistent quoting
> (mixed " and ' quotes within a file). Fix all the cases yamllint found
> so we can enable the check (once the check is in a release). Use
> whichever quoting is dominate in the file.
>
> Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
> ---
> .../arm/altera/socfpga-clk-manager.yaml | 4 ++--
> .../bindings/clock/nvidia,tegra124-car.yaml | 8 ++++----
> .../bindings/clock/nvidia,tegra20-car.yaml | 6 +++---
> .../devicetree/bindings/gpio/gpio-mxs.yaml | 9 +++++----
> .../bindings/gpio/snps,dw-apb-gpio.yaml | 4 ++--
> .../bindings/iio/temperature/adi,ltc2983.yaml | 20 +++++++++----------
> .../mailbox/qcom,apcs-kpss-global.yaml | 16 +++++++--------
> .../mailbox/xlnx,zynqmp-ipi-mailbox.yaml | 2 +-
> .../bindings/media/fsl,imx6q-vdoa.yaml | 2 +-
> .../devicetree/bindings/mfd/aspeed-lpc.yaml | 4 ++--
> .../devicetree/bindings/mfd/ti,twl.yaml | 4 ++--
> .../bindings/net/ethernet-switch.yaml | 2 +-
> .../pci/plda,xpressrich3-axi-common.yaml | 2 +-
> .../bindings/phy/motorola,cpcap-usb-phy.yaml | 4 ++--
> .../pinctrl/microchip,sparx5-sgpio.yaml | 12 +++++------
> .../bindings/pinctrl/qcom,pmic-gpio.yaml | 10 +++++-----
> .../bindings/pinctrl/qcom,pmic-mpp.yaml | 6 +++---
> .../bindings/pinctrl/renesas,pfc.yaml | 4 ++--
> .../bindings/pinctrl/renesas,rza1-ports.yaml | 2 +-
> .../pinctrl/renesas,rzg2l-pinctrl.yaml | 2 +-
> .../pinctrl/renesas,rzv2m-pinctrl.yaml | 2 +-
> .../bindings/power/renesas,sysc-rmobile.yaml | 4 ++--
> .../soc/microchip/atmel,at91rm9200-tcb.yaml | 8 ++++----
> .../soc/tegra/nvidia,tegra20-pmc.yaml | 12 +++++------
> 24 files changed, 75 insertions(+), 74 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml b/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml
> index a758f4bb2bb3..275554bfedce 100644
> --- a/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml
> +++ b/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml
> @@ -39,7 +39,7 @@ properties:
>
> "^[a-z0-9,_]+(clk|pll|clk_gate|clk_divided)(@[a-f0-9]+)?$":
> type: object
> - $ref: '#/$defs/clock-props'
> + $ref: "#/$defs/clock-props"
> unevaluatedProperties: false
>
> properties:
> @@ -67,7 +67,7 @@ properties:
> patternProperties:
> "^[a-z0-9,_]+(clk|pll)(@[a-f0-9]+)?$":
> type: object
> - $ref: '#/$defs/clock-props'
> + $ref: "#/$defs/clock-props"
> unevaluatedProperties: false
>
> properties:
> diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml
> index a9ba21144a56..13bb616249a1 100644
> --- a/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml
> +++ b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml
> @@ -37,7 +37,7 @@ properties:
> '#clock-cells':
> const: 1
>
> - "#reset-cells":
> + '#reset-cells':
> const: 1
>
> nvidia,external-memory-controller:
> @@ -46,7 +46,7 @@ properties:
> phandle of the external memory controller node
>
> patternProperties:
> - "^emc-timings-[0-9]+$":
> + '^emc-timings-[0-9]+$':
> type: object
> properties:
> nvidia,ram-code:
> @@ -56,7 +56,7 @@ patternProperties:
> this timing set is used for
>
> patternProperties:
> - "^timing-[0-9]+$":
> + '^timing-[0-9]+$':
> type: object
> properties:
> clock-frequency:
> @@ -94,7 +94,7 @@ required:
> - compatible
> - reg
> - '#clock-cells'
> - - "#reset-cells"
> + - '#reset-cells'
>
> additionalProperties: false
>
> diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml
> index bee2dd4b29bf..73cccc0df424 100644
> --- a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml
> +++ b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml
> @@ -39,11 +39,11 @@ properties:
> '#clock-cells':
> const: 1
>
> - "#reset-cells":
> + '#reset-cells':
> const: 1
>
> patternProperties:
> - "^(sclk)|(pll-[cem])$":
> + '^(sclk)|(pll-[cem])$':
> type: object
> properties:
> compatible:
> @@ -76,7 +76,7 @@ required:
> - compatible
> - reg
> - '#clock-cells'
> - - "#reset-cells"
> + - '#reset-cells'
>
> additionalProperties: false
>
> diff --git a/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml b/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml
> index aaf97124803f..4b5b8e794613 100644
> --- a/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml
> +++ b/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml
> @@ -26,9 +26,10 @@ properties:
> # Devices. Keep it as it to be compatible existed dts files.
> - const: simple-bus
>
> - '#address-cells':
> + "#address-cells":
> const: 1
> - '#size-cells':
> +
> + "#size-cells":
> const: 0
>
> reg:
> @@ -132,8 +133,8 @@ patternProperties:
> required:
> - compatible
> - reg
> - - '#address-cells'
> - - '#size-cells'
> + - "#address-cells"
> + - "#size-cells"
>
> additionalProperties: false
>
> diff --git a/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml b/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml
> index ab2afc0e4153..bba6f5b6606f 100644
> --- a/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml
> +++ b/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml
> @@ -111,8 +111,8 @@ additionalProperties: false
> required:
> - compatible
> - reg
> - - "#address-cells"
> - - "#size-cells"
> + - '#address-cells'
> + - '#size-cells'
>
> examples:
> - |
> diff --git a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
> index 312febeeb3bb..ee0b558bb866 100644
> --- a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
> +++ b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
> @@ -88,7 +88,7 @@ properties:
> const: 0
>
> patternProperties:
> - "^thermocouple@":
> + '^thermocouple@':
> $ref: '#/$defs/sensor-node'
> unevaluatedProperties: false
>
> @@ -146,7 +146,7 @@ patternProperties:
> required:
> - adi,custom-thermocouple
>
> - "^diode@":
> + '^diode@':
> $ref: '#/$defs/sensor-node'
> unevaluatedProperties: false
>
> @@ -191,7 +191,7 @@ patternProperties:
> $ref: /schemas/types.yaml#/definitions/uint32
> default: 0
>
> - "^rtd@":
> + '^rtd@':
> $ref: '#/$defs/sensor-node'
> unevaluatedProperties: false
> description: RTD sensor.
> @@ -280,7 +280,7 @@ patternProperties:
> type: boolean
>
> dependencies:
> - adi,current-rotate: [ "adi,rsense-share" ]
> + adi,current-rotate: [ 'adi,rsense-share' ]
>
> - if:
> properties:
> @@ -290,7 +290,7 @@ patternProperties:
> required:
> - adi,custom-rtd
>
> - "^thermistor@":
> + '^thermistor@':
> $ref: '#/$defs/sensor-node'
> unevaluatedProperties: false
> description: Thermistor sensor.
> @@ -364,7 +364,7 @@ patternProperties:
> - adi,rsense-handle
>
> dependencies:
> - adi,current-rotate: [ "adi,rsense-share" ]
> + adi,current-rotate: [ 'adi,rsense-share' ]
>
> allOf:
> - if:
> @@ -392,7 +392,7 @@ patternProperties:
> required:
> - adi,custom-thermistor
>
> - "^adc@":
> + '^adc@':
> $ref: '#/$defs/sensor-node'
> unevaluatedProperties: false
> description: Direct ADC sensor.
> @@ -407,7 +407,7 @@ patternProperties:
> description: Whether the sensor is single-ended.
> type: boolean
>
> - "^temp@":
> + '^temp@':
> $ref: '#/$defs/sensor-node'
> unevaluatedProperties: false
> description: Active analog temperature sensor.
> @@ -437,7 +437,7 @@ patternProperties:
> required:
> - adi,custom-temp
>
> - "^rsense@":
> + '^rsense@':
> $ref: '#/$defs/sensor-node'
> unevaluatedProperties: false
> description: Sense resistor sensor.
> @@ -476,7 +476,7 @@ allOf:
> - adi,ltc2984
> then:
> patternProperties:
> - "^temp@": false
> + '^temp@': false
>
> examples:
> - |
> diff --git a/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml b/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml
> index 615ed103b7e6..f40dc9048327 100644
> --- a/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml
> +++ b/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml
> @@ -187,10 +187,10 @@ allOf:
> enum:
> - qcom,msm8916-apcs-kpss-global
> then:
> - $ref: "#/$defs/msm8916-apcs-clock-controller"
> + $ref: '#/$defs/msm8916-apcs-clock-controller'
> properties:
> clock-controller:
> - $ref: "#/$defs/msm8916-apcs-clock-controller"
> + $ref: '#/$defs/msm8916-apcs-clock-controller'
>
> - if:
> properties:
> @@ -199,10 +199,10 @@ allOf:
> enum:
> - qcom,msm8939-apcs-kpss-global
> then:
> - $ref: "#/$defs/msm8939-apcs-clock-controller"
> + $ref: '#/$defs/msm8939-apcs-clock-controller'
> properties:
> clock-controller:
> - $ref: "#/$defs/msm8939-apcs-clock-controller"
> + $ref: '#/$defs/msm8939-apcs-clock-controller'
>
> - if:
> properties:
> @@ -211,10 +211,10 @@ allOf:
> enum:
> - qcom,sdx55-apcs-gcc
> then:
> - $ref: "#/$defs/sdx55-apcs-clock-controller"
> + $ref: '#/$defs/sdx55-apcs-clock-controller'
> properties:
> clock-controller:
> - $ref: "#/$defs/sdx55-apcs-clock-controller"
> + $ref: '#/$defs/sdx55-apcs-clock-controller'
>
> - if:
> properties:
> @@ -223,10 +223,10 @@ allOf:
> enum:
> - qcom,ipq6018-apcs-apps-global
> then:
> - $ref: "#/$defs/ipq6018-apcs-clock-controller"
> + $ref: '#/$defs/ipq6018-apcs-clock-controller'
> properties:
> clock-controller:
> - $ref: "#/$defs/ipq6018-apcs-clock-controller"
> + $ref: '#/$defs/ipq6018-apcs-clock-controller'
>
> - if:
> properties:
> diff --git a/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml
> index fe83b5cb1278..04d6473d666f 100644
> --- a/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml
> +++ b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml
> @@ -142,7 +142,7 @@ patternProperties:
> - compatible
> - reg
> - reg-names
> - - "#mbox-cells"
> + - '#mbox-cells'
> - xlnx,ipi-id
>
> required:
> diff --git a/Documentation/devicetree/bindings/media/fsl,imx6q-vdoa.yaml b/Documentation/devicetree/bindings/media/fsl,imx6q-vdoa.yaml
> index 511ac0d67a7f..988a5b3a62bd 100644
> --- a/Documentation/devicetree/bindings/media/fsl,imx6q-vdoa.yaml
> +++ b/Documentation/devicetree/bindings/media/fsl,imx6q-vdoa.yaml
> @@ -16,7 +16,7 @@ maintainers:
>
> properties:
> compatible:
> - const: "fsl,imx6q-vdoa"
> + const: fsl,imx6q-vdoa
>
> reg:
> maxItems: 1
> diff --git a/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml b/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml
> index f329223cec07..0adfeef149e7 100644
> --- a/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml
> +++ b/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml
> @@ -111,12 +111,12 @@ patternProperties:
> reg:
> maxItems: 1
>
> - '#reset-cells':
> + "#reset-cells":
> const: 1
>
> required:
> - compatible
> - - '#reset-cells'
> + - "#reset-cells"
>
> "^lpc-snoop@[0-9a-f]+$":
> type: object
> diff --git a/Documentation/devicetree/bindings/mfd/ti,twl.yaml b/Documentation/devicetree/bindings/mfd/ti,twl.yaml
> index 776b04e182cb..1611b1581a8e 100644
> --- a/Documentation/devicetree/bindings/mfd/ti,twl.yaml
> +++ b/Documentation/devicetree/bindings/mfd/ti,twl.yaml
> @@ -400,7 +400,7 @@ properties:
> - '#pwm-cells'
>
> patternProperties:
> - "^regulator-":
> + '^regulator-':
> type: object
> unevaluatedProperties: false
> $ref: /schemas/regulator/regulator.yaml
> @@ -429,7 +429,7 @@ required:
> - reg
> - interrupts
> - interrupt-controller
> - - "#interrupt-cells"
> + - '#interrupt-cells'
>
> examples:
> - |
> diff --git a/Documentation/devicetree/bindings/net/ethernet-switch.yaml b/Documentation/devicetree/bindings/net/ethernet-switch.yaml
> index b3b7e1a1b127..03001ba40e0f 100644
> --- a/Documentation/devicetree/bindings/net/ethernet-switch.yaml
> +++ b/Documentation/devicetree/bindings/net/ethernet-switch.yaml
> @@ -72,7 +72,7 @@ additionalProperties: true
> $defs:
> ethernet-ports:
> description: An ethernet switch without any extra port properties
> - $ref: '#'
> + $ref: "#"
>
> patternProperties:
> "^(ethernet-)?ports$":
> diff --git a/Documentation/devicetree/bindings/pci/plda,xpressrich3-axi-common.yaml b/Documentation/devicetree/bindings/pci/plda,xpressrich3-axi-common.yaml
> index 039eecdbd6aa..fe2e8beb5bab 100644
> --- a/Documentation/devicetree/bindings/pci/plda,xpressrich3-axi-common.yaml
> +++ b/Documentation/devicetree/bindings/pci/plda,xpressrich3-axi-common.yaml
> @@ -72,7 +72,7 @@ required:
> - reg-names
> - interrupts
> - msi-controller
> - - "#interrupt-cells"
> + - '#interrupt-cells'
> - interrupt-map-mask
> - interrupt-map
>
> diff --git a/Documentation/devicetree/bindings/phy/motorola,cpcap-usb-phy.yaml b/Documentation/devicetree/bindings/phy/motorola,cpcap-usb-phy.yaml
> index 0febd04a61f4..dd345cbd0a0b 100644
> --- a/Documentation/devicetree/bindings/phy/motorola,cpcap-usb-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/motorola,cpcap-usb-phy.yaml
> @@ -67,8 +67,8 @@ properties:
> mode-gpios:
> description: Optional GPIOs for configuring alternate modes
> items:
> - - description: "mode selection GPIO #0"
> - - description: "mode selection GPIO #1"
> + - description: mode selection GPIO#0
> + - description: mode selection GPIO#1
>
> required:
> - compatible
> diff --git a/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml b/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml
> index 0df4e114fdd6..fa47732d7cef 100644
> --- a/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml
> @@ -18,7 +18,7 @@ description: |
>
> properties:
> $nodename:
> - pattern: "^gpio@[0-9a-f]+$"
> + pattern: '^gpio@[0-9a-f]+$'
>
> compatible:
> enum:
> @@ -26,10 +26,10 @@ properties:
> - mscc,ocelot-sgpio
> - mscc,luton-sgpio
>
> - "#address-cells":
> + '#address-cells':
> const: 1
>
> - "#size-cells":
> + '#size-cells':
> const: 0
>
> reg:
> @@ -76,7 +76,7 @@ properties:
> - const: switch
>
> patternProperties:
> - "^gpio@[0-1]$":
> + '^gpio@[0-1]$':
> type: object
> properties:
> compatible:
> @@ -132,8 +132,8 @@ required:
> - reg
> - clocks
> - microchip,sgpio-port-ranges
> - - "#address-cells"
> - - "#size-cells"
> + - '#address-cells'
> + - '#size-cells'
>
> examples:
> - |
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
> index 5e6dfcc3fe9b..6632bcd037ba 100644
> --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
> @@ -424,13 +424,13 @@ allOf:
> patternProperties:
> '-state$':
> oneOf:
> - - $ref: "#/$defs/qcom-pmic-gpio-state"
> + - $ref: '#/$defs/qcom-pmic-gpio-state'
> - patternProperties:
> - "(pinconf|-pins)$":
> - $ref: "#/$defs/qcom-pmic-gpio-state"
> + '(pinconf|-pins)$':
> + $ref: '#/$defs/qcom-pmic-gpio-state'
> additionalProperties: false
>
> - "-hog(-[0-9]+)?$":
> + '-hog(-[0-9]+)?$':
> type: object
> required:
> - gpio-hog
> @@ -503,7 +503,7 @@ $defs:
> - gpio1-gpio12 for pmxr2230
>
> items:
> - pattern: "^gpio([0-9]+)$"
> + pattern: '^gpio([0-9]+)$'
>
> function:
> items:
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml
> index 9364ae05f3e6..daf4c1c03712 100644
> --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml
> @@ -74,10 +74,10 @@ required:
> patternProperties:
> '-state$':
> oneOf:
> - - $ref: "#/$defs/qcom-pmic-mpp-state"
> + - $ref: '#/$defs/qcom-pmic-mpp-state'
> - patternProperties:
> '-pins$':
> - $ref: "#/$defs/qcom-pmic-mpp-state"
> + $ref: '#/$defs/qcom-pmic-mpp-state'
> additionalProperties: false
>
> $defs:
> @@ -100,7 +100,7 @@ $defs:
> - mpp1-mpp4 for pma8084
>
> items:
> - pattern: "^mpp([0-9]+)$"
> + pattern: '^mpp([0-9]+)$'
>
> function:
> items:
> diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml
> index cfe004573366..ab1cfe9dcde5 100644
> --- a/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml
> @@ -129,7 +129,7 @@ additionalProperties:
>
> - type: object
> additionalProperties:
> - $ref: "#/additionalProperties/anyOf/0"
> + $ref: '#/additionalProperties/anyOf/0'
>
> examples:
> - |
> @@ -190,7 +190,7 @@ examples:
>
> sdhi0_pins: sd0 {
> groups = "sdhi0_data4", "sdhi0_ctrl";
> - function = "sdhi0";
> + function = "sdhi0';
> power-source = <3300>;
> };
> };
> diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml
> index 2bd7d47d0fdb..737eb4e14090 100644
> --- a/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml
> @@ -118,7 +118,7 @@ additionalProperties:
>
> - type: object
> additionalProperties:
> - $ref: "#/additionalProperties/anyOf/0"
> + $ref: '#/additionalProperties/anyOf/0'
>
> examples:
> - |
> diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
> index 5156d54b240b..00c05243b9a4 100644
> --- a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
> @@ -135,7 +135,7 @@ additionalProperties:
>
> - type: object
> additionalProperties:
> - $ref: "#/additionalProperties/anyOf/0"
> + $ref: '#/additionalProperties/anyOf/0'
>
> allOf:
> - $ref: pinctrl.yaml#
> diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml
> index 5fa5d31f8866..88b2fa5e684d 100644
> --- a/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml
> @@ -88,7 +88,7 @@ additionalProperties:
>
> - type: object
> additionalProperties:
> - $ref: "#/additionalProperties/anyOf/0"
> + $ref: '#/additionalProperties/anyOf/0'
>
> allOf:
> - $ref: pinctrl.yaml#
> diff --git a/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.yaml b/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.yaml
> index fba6914ec40d..948a9da111df 100644
> --- a/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.yaml
> +++ b/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.yaml
> @@ -45,7 +45,7 @@ properties:
> const: 0
>
> additionalProperties:
> - $ref: "#/$defs/pd-node"
> + $ref: '#/$defs/pd-node'
>
> required:
> - compatible
> @@ -83,7 +83,7 @@ $defs:
> - '#power-domain-cells'
>
> additionalProperties:
> - $ref: "#/$defs/pd-node"
> + $ref: '#/$defs/pd-node'
>
> examples:
> - |
> diff --git a/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml b/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml
> index 2c7275c4503b..abf1adca0773 100644
> --- a/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml
> +++ b/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml
> @@ -57,7 +57,7 @@ properties:
> const: 0
>
> patternProperties:
> - "^timer@[0-2]$":
> + '^timer@[0-2]$':
> description: The timer block channels that are used as timers or counters.
> type: object
> additionalProperties: false
> @@ -80,7 +80,7 @@ patternProperties:
> - compatible
> - reg
>
> - "^pwm@[0-2]$":
> + '^pwm@[0-2]$':
> description: The timer block channels that are used as PWMs.
> $ref: /schemas/pwm/pwm.yaml#
> type: object
> @@ -92,7 +92,7 @@ patternProperties:
> TCB channel to use for this PWM.
> enum: [ 0, 1, 2 ]
>
> - "#pwm-cells":
> + '#pwm-cells':
> description:
> The only third cell flag supported by this binding is
> PWM_POLARITY_INVERTED.
> @@ -101,7 +101,7 @@ patternProperties:
> required:
> - compatible
> - reg
> - - "#pwm-cells"
> + - '#pwm-cells'
>
> additionalProperties: false
>
> diff --git a/Documentation/devicetree/bindings/soc/tegra/nvidia,tegra20-pmc.yaml b/Documentation/devicetree/bindings/soc/tegra/nvidia,tegra20-pmc.yaml
> index 7140c312d898..f516960dbbef 100644
> --- a/Documentation/devicetree/bindings/soc/tegra/nvidia,tegra20-pmc.yaml
> +++ b/Documentation/devicetree/bindings/soc/tegra/nvidia,tegra20-pmc.yaml
> @@ -133,12 +133,12 @@ properties:
> property. The supported-hw is a bitfield indicating SoC speedo or
> process ID mask.
>
> - "#power-domain-cells":
> + '#power-domain-cells':
> const: 0
>
> required:
> - operating-points-v2
> - - "#power-domain-cells"
> + - '#power-domain-cells'
>
> i2c-thermtrip:
> type: object
> @@ -220,7 +220,7 @@ properties:
> xusbc USB Partition C Tegra114/124/210
>
> patternProperties:
> - "^[a-z0-9]+$":
> + '^[a-z0-9]+$':
> type: object
> additionalProperties: false
> properties:
> @@ -365,9 +365,9 @@ allOf:
> additionalProperties: false
>
> dependencies:
> - nvidia,suspend-mode: ["nvidia,core-pwr-off-time", "nvidia,cpu-pwr-off-time"]
> - nvidia,core-pwr-off-time: ["nvidia,core-pwr-good-time"]
> - nvidia,cpu-pwr-off-time: ["nvidia,cpu-pwr-good-time"]
> + nvidia,suspend-mode: ['nvidia,core-pwr-off-time', 'nvidia,cpu-pwr-off-time']
> + nvidia,core-pwr-off-time: ['nvidia,core-pwr-good-time']
> + nvidia,cpu-pwr-off-time: ['nvidia,cpu-pwr-good-time']
>
> examples:
> - |
> --
> 2.51.0
>
--
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
WARNING: multiple messages have this Message-ID (diff)
From: Alexandre Belloni <alexandre.belloni@bootlin.com>
To: "Rob Herring (Arm)" <robh@kernel.org>
Cc: "Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Stephen Boyd" <sboyd@kernel.org>,
"Thierry Reding" <thierry.reding@gmail.com>,
"Linus Walleij" <linus.walleij@linaro.org>,
"Bartosz Golaszewski" <brgl@bgdev.pl>,
"Shawn Guo" <shawnguo@kernel.org>,
"Fabio Estevam" <festevam@gmail.com>,
"Nuno Sá" <nuno.sa@analog.com>,
"Lars-Peter Clausen" <lars@metafoo.de>,
"Michael Hennerich" <Michael.Hennerich@analog.com>,
"Jonathan Cameron" <jic23@kernel.org>,
"Andy Shevchenko" <andy@kernel.org>,
"Jassi Brar" <jassisinghbrar@gmail.com>,
"Mauro Carvalho Chehab" <mchehab@kernel.org>,
"Lee Jones" <lee@kernel.org>, "Joel Stanley" <joel@jms.id.au>,
"Andrew Jeffery" <andrew@codeconstruct.com.au>,
"Andrew Lunn" <andrew@lunn.ch>,
"Vladimir Oltean" <olteanv@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
"Eric Dumazet" <edumazet@google.com>,
"Jakub Kicinski" <kuba@kernel.org>,
"Paolo Abeni" <pabeni@redhat.com>,
"Daire McNamara" <daire.mcnamara@microchip.com>,
"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
"Krzysztof Wilczyński" <kwilczynski@kernel.org>,
"Manivannan Sadhasivam" <mani@kernel.org>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Vinod Koul" <vkoul@kernel.org>,
"Kishon Vijay Abraham I" <kishon@kernel.org>,
"Bjorn Andersson" <andersson@kernel.org>,
"Geert Uytterhoeven" <geert+renesas@glider.be>,
"Nicolas Ferre" <nicolas.ferre@microchip.com>,
"Claudiu Beznea" <claudiu.beznea@tuxon.dev>,
"Florian Fainelli" <f.fainelli@gmail.com>,
"Tony Lindgren" <tony@atomide.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-clk@vger.kernel.org, linux-gpio@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-iio@vger.kernel.org,
linux-media@vger.kernel.org, netdev@vger.kernel.org,
linux-pci@vger.kernel.org, linux-phy@lists.infradead.org
Subject: Re: [PATCH] dt-bindings: Fix inconsistent quoting
Date: Thu, 16 Oct 2025 08:49:13 +0200 [thread overview]
Message-ID: <2025101606491337a4fffe@mail.local> (raw)
In-Reply-To: <20251015232015.846282-1-robh@kernel.org>
On 15/10/2025 18:16:24-0500, Rob Herring (Arm) wrote:
> yamllint has gained a new check which checks for inconsistent quoting
> (mixed " and ' quotes within a file). Fix all the cases yamllint found
> so we can enable the check (once the check is in a release). Use
> whichever quoting is dominate in the file.
>
> Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
> ---
> .../arm/altera/socfpga-clk-manager.yaml | 4 ++--
> .../bindings/clock/nvidia,tegra124-car.yaml | 8 ++++----
> .../bindings/clock/nvidia,tegra20-car.yaml | 6 +++---
> .../devicetree/bindings/gpio/gpio-mxs.yaml | 9 +++++----
> .../bindings/gpio/snps,dw-apb-gpio.yaml | 4 ++--
> .../bindings/iio/temperature/adi,ltc2983.yaml | 20 +++++++++----------
> .../mailbox/qcom,apcs-kpss-global.yaml | 16 +++++++--------
> .../mailbox/xlnx,zynqmp-ipi-mailbox.yaml | 2 +-
> .../bindings/media/fsl,imx6q-vdoa.yaml | 2 +-
> .../devicetree/bindings/mfd/aspeed-lpc.yaml | 4 ++--
> .../devicetree/bindings/mfd/ti,twl.yaml | 4 ++--
> .../bindings/net/ethernet-switch.yaml | 2 +-
> .../pci/plda,xpressrich3-axi-common.yaml | 2 +-
> .../bindings/phy/motorola,cpcap-usb-phy.yaml | 4 ++--
> .../pinctrl/microchip,sparx5-sgpio.yaml | 12 +++++------
> .../bindings/pinctrl/qcom,pmic-gpio.yaml | 10 +++++-----
> .../bindings/pinctrl/qcom,pmic-mpp.yaml | 6 +++---
> .../bindings/pinctrl/renesas,pfc.yaml | 4 ++--
> .../bindings/pinctrl/renesas,rza1-ports.yaml | 2 +-
> .../pinctrl/renesas,rzg2l-pinctrl.yaml | 2 +-
> .../pinctrl/renesas,rzv2m-pinctrl.yaml | 2 +-
> .../bindings/power/renesas,sysc-rmobile.yaml | 4 ++--
> .../soc/microchip/atmel,at91rm9200-tcb.yaml | 8 ++++----
> .../soc/tegra/nvidia,tegra20-pmc.yaml | 12 +++++------
> 24 files changed, 75 insertions(+), 74 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml b/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml
> index a758f4bb2bb3..275554bfedce 100644
> --- a/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml
> +++ b/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml
> @@ -39,7 +39,7 @@ properties:
>
> "^[a-z0-9,_]+(clk|pll|clk_gate|clk_divided)(@[a-f0-9]+)?$":
> type: object
> - $ref: '#/$defs/clock-props'
> + $ref: "#/$defs/clock-props"
> unevaluatedProperties: false
>
> properties:
> @@ -67,7 +67,7 @@ properties:
> patternProperties:
> "^[a-z0-9,_]+(clk|pll)(@[a-f0-9]+)?$":
> type: object
> - $ref: '#/$defs/clock-props'
> + $ref: "#/$defs/clock-props"
> unevaluatedProperties: false
>
> properties:
> diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml
> index a9ba21144a56..13bb616249a1 100644
> --- a/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml
> +++ b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml
> @@ -37,7 +37,7 @@ properties:
> '#clock-cells':
> const: 1
>
> - "#reset-cells":
> + '#reset-cells':
> const: 1
>
> nvidia,external-memory-controller:
> @@ -46,7 +46,7 @@ properties:
> phandle of the external memory controller node
>
> patternProperties:
> - "^emc-timings-[0-9]+$":
> + '^emc-timings-[0-9]+$':
> type: object
> properties:
> nvidia,ram-code:
> @@ -56,7 +56,7 @@ patternProperties:
> this timing set is used for
>
> patternProperties:
> - "^timing-[0-9]+$":
> + '^timing-[0-9]+$':
> type: object
> properties:
> clock-frequency:
> @@ -94,7 +94,7 @@ required:
> - compatible
> - reg
> - '#clock-cells'
> - - "#reset-cells"
> + - '#reset-cells'
>
> additionalProperties: false
>
> diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml
> index bee2dd4b29bf..73cccc0df424 100644
> --- a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml
> +++ b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml
> @@ -39,11 +39,11 @@ properties:
> '#clock-cells':
> const: 1
>
> - "#reset-cells":
> + '#reset-cells':
> const: 1
>
> patternProperties:
> - "^(sclk)|(pll-[cem])$":
> + '^(sclk)|(pll-[cem])$':
> type: object
> properties:
> compatible:
> @@ -76,7 +76,7 @@ required:
> - compatible
> - reg
> - '#clock-cells'
> - - "#reset-cells"
> + - '#reset-cells'
>
> additionalProperties: false
>
> diff --git a/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml b/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml
> index aaf97124803f..4b5b8e794613 100644
> --- a/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml
> +++ b/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml
> @@ -26,9 +26,10 @@ properties:
> # Devices. Keep it as it to be compatible existed dts files.
> - const: simple-bus
>
> - '#address-cells':
> + "#address-cells":
> const: 1
> - '#size-cells':
> +
> + "#size-cells":
> const: 0
>
> reg:
> @@ -132,8 +133,8 @@ patternProperties:
> required:
> - compatible
> - reg
> - - '#address-cells'
> - - '#size-cells'
> + - "#address-cells"
> + - "#size-cells"
>
> additionalProperties: false
>
> diff --git a/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml b/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml
> index ab2afc0e4153..bba6f5b6606f 100644
> --- a/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml
> +++ b/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml
> @@ -111,8 +111,8 @@ additionalProperties: false
> required:
> - compatible
> - reg
> - - "#address-cells"
> - - "#size-cells"
> + - '#address-cells'
> + - '#size-cells'
>
> examples:
> - |
> diff --git a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
> index 312febeeb3bb..ee0b558bb866 100644
> --- a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
> +++ b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
> @@ -88,7 +88,7 @@ properties:
> const: 0
>
> patternProperties:
> - "^thermocouple@":
> + '^thermocouple@':
> $ref: '#/$defs/sensor-node'
> unevaluatedProperties: false
>
> @@ -146,7 +146,7 @@ patternProperties:
> required:
> - adi,custom-thermocouple
>
> - "^diode@":
> + '^diode@':
> $ref: '#/$defs/sensor-node'
> unevaluatedProperties: false
>
> @@ -191,7 +191,7 @@ patternProperties:
> $ref: /schemas/types.yaml#/definitions/uint32
> default: 0
>
> - "^rtd@":
> + '^rtd@':
> $ref: '#/$defs/sensor-node'
> unevaluatedProperties: false
> description: RTD sensor.
> @@ -280,7 +280,7 @@ patternProperties:
> type: boolean
>
> dependencies:
> - adi,current-rotate: [ "adi,rsense-share" ]
> + adi,current-rotate: [ 'adi,rsense-share' ]
>
> - if:
> properties:
> @@ -290,7 +290,7 @@ patternProperties:
> required:
> - adi,custom-rtd
>
> - "^thermistor@":
> + '^thermistor@':
> $ref: '#/$defs/sensor-node'
> unevaluatedProperties: false
> description: Thermistor sensor.
> @@ -364,7 +364,7 @@ patternProperties:
> - adi,rsense-handle
>
> dependencies:
> - adi,current-rotate: [ "adi,rsense-share" ]
> + adi,current-rotate: [ 'adi,rsense-share' ]
>
> allOf:
> - if:
> @@ -392,7 +392,7 @@ patternProperties:
> required:
> - adi,custom-thermistor
>
> - "^adc@":
> + '^adc@':
> $ref: '#/$defs/sensor-node'
> unevaluatedProperties: false
> description: Direct ADC sensor.
> @@ -407,7 +407,7 @@ patternProperties:
> description: Whether the sensor is single-ended.
> type: boolean
>
> - "^temp@":
> + '^temp@':
> $ref: '#/$defs/sensor-node'
> unevaluatedProperties: false
> description: Active analog temperature sensor.
> @@ -437,7 +437,7 @@ patternProperties:
> required:
> - adi,custom-temp
>
> - "^rsense@":
> + '^rsense@':
> $ref: '#/$defs/sensor-node'
> unevaluatedProperties: false
> description: Sense resistor sensor.
> @@ -476,7 +476,7 @@ allOf:
> - adi,ltc2984
> then:
> patternProperties:
> - "^temp@": false
> + '^temp@': false
>
> examples:
> - |
> diff --git a/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml b/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml
> index 615ed103b7e6..f40dc9048327 100644
> --- a/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml
> +++ b/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml
> @@ -187,10 +187,10 @@ allOf:
> enum:
> - qcom,msm8916-apcs-kpss-global
> then:
> - $ref: "#/$defs/msm8916-apcs-clock-controller"
> + $ref: '#/$defs/msm8916-apcs-clock-controller'
> properties:
> clock-controller:
> - $ref: "#/$defs/msm8916-apcs-clock-controller"
> + $ref: '#/$defs/msm8916-apcs-clock-controller'
>
> - if:
> properties:
> @@ -199,10 +199,10 @@ allOf:
> enum:
> - qcom,msm8939-apcs-kpss-global
> then:
> - $ref: "#/$defs/msm8939-apcs-clock-controller"
> + $ref: '#/$defs/msm8939-apcs-clock-controller'
> properties:
> clock-controller:
> - $ref: "#/$defs/msm8939-apcs-clock-controller"
> + $ref: '#/$defs/msm8939-apcs-clock-controller'
>
> - if:
> properties:
> @@ -211,10 +211,10 @@ allOf:
> enum:
> - qcom,sdx55-apcs-gcc
> then:
> - $ref: "#/$defs/sdx55-apcs-clock-controller"
> + $ref: '#/$defs/sdx55-apcs-clock-controller'
> properties:
> clock-controller:
> - $ref: "#/$defs/sdx55-apcs-clock-controller"
> + $ref: '#/$defs/sdx55-apcs-clock-controller'
>
> - if:
> properties:
> @@ -223,10 +223,10 @@ allOf:
> enum:
> - qcom,ipq6018-apcs-apps-global
> then:
> - $ref: "#/$defs/ipq6018-apcs-clock-controller"
> + $ref: '#/$defs/ipq6018-apcs-clock-controller'
> properties:
> clock-controller:
> - $ref: "#/$defs/ipq6018-apcs-clock-controller"
> + $ref: '#/$defs/ipq6018-apcs-clock-controller'
>
> - if:
> properties:
> diff --git a/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml
> index fe83b5cb1278..04d6473d666f 100644
> --- a/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml
> +++ b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml
> @@ -142,7 +142,7 @@ patternProperties:
> - compatible
> - reg
> - reg-names
> - - "#mbox-cells"
> + - '#mbox-cells'
> - xlnx,ipi-id
>
> required:
> diff --git a/Documentation/devicetree/bindings/media/fsl,imx6q-vdoa.yaml b/Documentation/devicetree/bindings/media/fsl,imx6q-vdoa.yaml
> index 511ac0d67a7f..988a5b3a62bd 100644
> --- a/Documentation/devicetree/bindings/media/fsl,imx6q-vdoa.yaml
> +++ b/Documentation/devicetree/bindings/media/fsl,imx6q-vdoa.yaml
> @@ -16,7 +16,7 @@ maintainers:
>
> properties:
> compatible:
> - const: "fsl,imx6q-vdoa"
> + const: fsl,imx6q-vdoa
>
> reg:
> maxItems: 1
> diff --git a/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml b/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml
> index f329223cec07..0adfeef149e7 100644
> --- a/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml
> +++ b/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml
> @@ -111,12 +111,12 @@ patternProperties:
> reg:
> maxItems: 1
>
> - '#reset-cells':
> + "#reset-cells":
> const: 1
>
> required:
> - compatible
> - - '#reset-cells'
> + - "#reset-cells"
>
> "^lpc-snoop@[0-9a-f]+$":
> type: object
> diff --git a/Documentation/devicetree/bindings/mfd/ti,twl.yaml b/Documentation/devicetree/bindings/mfd/ti,twl.yaml
> index 776b04e182cb..1611b1581a8e 100644
> --- a/Documentation/devicetree/bindings/mfd/ti,twl.yaml
> +++ b/Documentation/devicetree/bindings/mfd/ti,twl.yaml
> @@ -400,7 +400,7 @@ properties:
> - '#pwm-cells'
>
> patternProperties:
> - "^regulator-":
> + '^regulator-':
> type: object
> unevaluatedProperties: false
> $ref: /schemas/regulator/regulator.yaml
> @@ -429,7 +429,7 @@ required:
> - reg
> - interrupts
> - interrupt-controller
> - - "#interrupt-cells"
> + - '#interrupt-cells'
>
> examples:
> - |
> diff --git a/Documentation/devicetree/bindings/net/ethernet-switch.yaml b/Documentation/devicetree/bindings/net/ethernet-switch.yaml
> index b3b7e1a1b127..03001ba40e0f 100644
> --- a/Documentation/devicetree/bindings/net/ethernet-switch.yaml
> +++ b/Documentation/devicetree/bindings/net/ethernet-switch.yaml
> @@ -72,7 +72,7 @@ additionalProperties: true
> $defs:
> ethernet-ports:
> description: An ethernet switch without any extra port properties
> - $ref: '#'
> + $ref: "#"
>
> patternProperties:
> "^(ethernet-)?ports$":
> diff --git a/Documentation/devicetree/bindings/pci/plda,xpressrich3-axi-common.yaml b/Documentation/devicetree/bindings/pci/plda,xpressrich3-axi-common.yaml
> index 039eecdbd6aa..fe2e8beb5bab 100644
> --- a/Documentation/devicetree/bindings/pci/plda,xpressrich3-axi-common.yaml
> +++ b/Documentation/devicetree/bindings/pci/plda,xpressrich3-axi-common.yaml
> @@ -72,7 +72,7 @@ required:
> - reg-names
> - interrupts
> - msi-controller
> - - "#interrupt-cells"
> + - '#interrupt-cells'
> - interrupt-map-mask
> - interrupt-map
>
> diff --git a/Documentation/devicetree/bindings/phy/motorola,cpcap-usb-phy.yaml b/Documentation/devicetree/bindings/phy/motorola,cpcap-usb-phy.yaml
> index 0febd04a61f4..dd345cbd0a0b 100644
> --- a/Documentation/devicetree/bindings/phy/motorola,cpcap-usb-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/motorola,cpcap-usb-phy.yaml
> @@ -67,8 +67,8 @@ properties:
> mode-gpios:
> description: Optional GPIOs for configuring alternate modes
> items:
> - - description: "mode selection GPIO #0"
> - - description: "mode selection GPIO #1"
> + - description: mode selection GPIO#0
> + - description: mode selection GPIO#1
>
> required:
> - compatible
> diff --git a/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml b/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml
> index 0df4e114fdd6..fa47732d7cef 100644
> --- a/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml
> @@ -18,7 +18,7 @@ description: |
>
> properties:
> $nodename:
> - pattern: "^gpio@[0-9a-f]+$"
> + pattern: '^gpio@[0-9a-f]+$'
>
> compatible:
> enum:
> @@ -26,10 +26,10 @@ properties:
> - mscc,ocelot-sgpio
> - mscc,luton-sgpio
>
> - "#address-cells":
> + '#address-cells':
> const: 1
>
> - "#size-cells":
> + '#size-cells':
> const: 0
>
> reg:
> @@ -76,7 +76,7 @@ properties:
> - const: switch
>
> patternProperties:
> - "^gpio@[0-1]$":
> + '^gpio@[0-1]$':
> type: object
> properties:
> compatible:
> @@ -132,8 +132,8 @@ required:
> - reg
> - clocks
> - microchip,sgpio-port-ranges
> - - "#address-cells"
> - - "#size-cells"
> + - '#address-cells'
> + - '#size-cells'
>
> examples:
> - |
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
> index 5e6dfcc3fe9b..6632bcd037ba 100644
> --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
> @@ -424,13 +424,13 @@ allOf:
> patternProperties:
> '-state$':
> oneOf:
> - - $ref: "#/$defs/qcom-pmic-gpio-state"
> + - $ref: '#/$defs/qcom-pmic-gpio-state'
> - patternProperties:
> - "(pinconf|-pins)$":
> - $ref: "#/$defs/qcom-pmic-gpio-state"
> + '(pinconf|-pins)$':
> + $ref: '#/$defs/qcom-pmic-gpio-state'
> additionalProperties: false
>
> - "-hog(-[0-9]+)?$":
> + '-hog(-[0-9]+)?$':
> type: object
> required:
> - gpio-hog
> @@ -503,7 +503,7 @@ $defs:
> - gpio1-gpio12 for pmxr2230
>
> items:
> - pattern: "^gpio([0-9]+)$"
> + pattern: '^gpio([0-9]+)$'
>
> function:
> items:
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml
> index 9364ae05f3e6..daf4c1c03712 100644
> --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml
> @@ -74,10 +74,10 @@ required:
> patternProperties:
> '-state$':
> oneOf:
> - - $ref: "#/$defs/qcom-pmic-mpp-state"
> + - $ref: '#/$defs/qcom-pmic-mpp-state'
> - patternProperties:
> '-pins$':
> - $ref: "#/$defs/qcom-pmic-mpp-state"
> + $ref: '#/$defs/qcom-pmic-mpp-state'
> additionalProperties: false
>
> $defs:
> @@ -100,7 +100,7 @@ $defs:
> - mpp1-mpp4 for pma8084
>
> items:
> - pattern: "^mpp([0-9]+)$"
> + pattern: '^mpp([0-9]+)$'
>
> function:
> items:
> diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml
> index cfe004573366..ab1cfe9dcde5 100644
> --- a/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml
> @@ -129,7 +129,7 @@ additionalProperties:
>
> - type: object
> additionalProperties:
> - $ref: "#/additionalProperties/anyOf/0"
> + $ref: '#/additionalProperties/anyOf/0'
>
> examples:
> - |
> @@ -190,7 +190,7 @@ examples:
>
> sdhi0_pins: sd0 {
> groups = "sdhi0_data4", "sdhi0_ctrl";
> - function = "sdhi0";
> + function = "sdhi0';
> power-source = <3300>;
> };
> };
> diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml
> index 2bd7d47d0fdb..737eb4e14090 100644
> --- a/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml
> @@ -118,7 +118,7 @@ additionalProperties:
>
> - type: object
> additionalProperties:
> - $ref: "#/additionalProperties/anyOf/0"
> + $ref: '#/additionalProperties/anyOf/0'
>
> examples:
> - |
> diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
> index 5156d54b240b..00c05243b9a4 100644
> --- a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
> @@ -135,7 +135,7 @@ additionalProperties:
>
> - type: object
> additionalProperties:
> - $ref: "#/additionalProperties/anyOf/0"
> + $ref: '#/additionalProperties/anyOf/0'
>
> allOf:
> - $ref: pinctrl.yaml#
> diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml
> index 5fa5d31f8866..88b2fa5e684d 100644
> --- a/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml
> @@ -88,7 +88,7 @@ additionalProperties:
>
> - type: object
> additionalProperties:
> - $ref: "#/additionalProperties/anyOf/0"
> + $ref: '#/additionalProperties/anyOf/0'
>
> allOf:
> - $ref: pinctrl.yaml#
> diff --git a/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.yaml b/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.yaml
> index fba6914ec40d..948a9da111df 100644
> --- a/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.yaml
> +++ b/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.yaml
> @@ -45,7 +45,7 @@ properties:
> const: 0
>
> additionalProperties:
> - $ref: "#/$defs/pd-node"
> + $ref: '#/$defs/pd-node'
>
> required:
> - compatible
> @@ -83,7 +83,7 @@ $defs:
> - '#power-domain-cells'
>
> additionalProperties:
> - $ref: "#/$defs/pd-node"
> + $ref: '#/$defs/pd-node'
>
> examples:
> - |
> diff --git a/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml b/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml
> index 2c7275c4503b..abf1adca0773 100644
> --- a/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml
> +++ b/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml
> @@ -57,7 +57,7 @@ properties:
> const: 0
>
> patternProperties:
> - "^timer@[0-2]$":
> + '^timer@[0-2]$':
> description: The timer block channels that are used as timers or counters.
> type: object
> additionalProperties: false
> @@ -80,7 +80,7 @@ patternProperties:
> - compatible
> - reg
>
> - "^pwm@[0-2]$":
> + '^pwm@[0-2]$':
> description: The timer block channels that are used as PWMs.
> $ref: /schemas/pwm/pwm.yaml#
> type: object
> @@ -92,7 +92,7 @@ patternProperties:
> TCB channel to use for this PWM.
> enum: [ 0, 1, 2 ]
>
> - "#pwm-cells":
> + '#pwm-cells':
> description:
> The only third cell flag supported by this binding is
> PWM_POLARITY_INVERTED.
> @@ -101,7 +101,7 @@ patternProperties:
> required:
> - compatible
> - reg
> - - "#pwm-cells"
> + - '#pwm-cells'
>
> additionalProperties: false
>
> diff --git a/Documentation/devicetree/bindings/soc/tegra/nvidia,tegra20-pmc.yaml b/Documentation/devicetree/bindings/soc/tegra/nvidia,tegra20-pmc.yaml
> index 7140c312d898..f516960dbbef 100644
> --- a/Documentation/devicetree/bindings/soc/tegra/nvidia,tegra20-pmc.yaml
> +++ b/Documentation/devicetree/bindings/soc/tegra/nvidia,tegra20-pmc.yaml
> @@ -133,12 +133,12 @@ properties:
> property. The supported-hw is a bitfield indicating SoC speedo or
> process ID mask.
>
> - "#power-domain-cells":
> + '#power-domain-cells':
> const: 0
>
> required:
> - operating-points-v2
> - - "#power-domain-cells"
> + - '#power-domain-cells'
>
> i2c-thermtrip:
> type: object
> @@ -220,7 +220,7 @@ properties:
> xusbc USB Partition C Tegra114/124/210
>
> patternProperties:
> - "^[a-z0-9]+$":
> + '^[a-z0-9]+$':
> type: object
> additionalProperties: false
> properties:
> @@ -365,9 +365,9 @@ allOf:
> additionalProperties: false
>
> dependencies:
> - nvidia,suspend-mode: ["nvidia,core-pwr-off-time", "nvidia,cpu-pwr-off-time"]
> - nvidia,core-pwr-off-time: ["nvidia,core-pwr-good-time"]
> - nvidia,cpu-pwr-off-time: ["nvidia,cpu-pwr-good-time"]
> + nvidia,suspend-mode: ['nvidia,core-pwr-off-time', 'nvidia,cpu-pwr-off-time']
> + nvidia,core-pwr-off-time: ['nvidia,core-pwr-good-time']
> + nvidia,cpu-pwr-off-time: ['nvidia,cpu-pwr-good-time']
>
> examples:
> - |
> --
> 2.51.0
>
--
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
next prev parent reply other threads:[~2025-10-16 6:50 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-15 23:16 [PATCH] dt-bindings: Fix inconsistent quoting Rob Herring (Arm)
2025-10-15 23:16 ` Rob Herring (Arm)
2025-10-16 0:26 ` Rob Herring (Arm)
2025-10-16 0:26 ` Rob Herring (Arm)
2025-10-16 6:49 ` Alexandre Belloni [this message]
2025-10-16 6:49 ` Alexandre Belloni
2025-10-16 6:57 ` Krzysztof Kozlowski
2025-10-16 6:57 ` Krzysztof Kozlowski
2025-10-16 7:56 ` Geert Uytterhoeven
2025-10-16 7:56 ` Geert Uytterhoeven
2025-10-16 11:46 ` Rob Herring
2025-10-16 11:46 ` Rob Herring
2025-10-16 12:06 ` Geert Uytterhoeven
2025-10-16 12:06 ` Geert Uytterhoeven
2025-10-16 10:53 ` Jonathan Cameron
2025-10-16 10:53 ` Jonathan Cameron
2025-10-16 15:38 ` Frank Li
2025-10-16 15:38 ` Frank Li
2025-10-16 16:06 ` Rob Herring
2025-10-16 16:06 ` Rob Herring
2025-10-17 6:26 ` Andrew Jeffery
2025-10-17 6:26 ` Andrew Jeffery
2025-10-18 19:05 ` Jassi Brar
2025-10-18 19:05 ` Jassi Brar
2025-10-20 21:35 ` Linus Walleij
2025-10-20 21:35 ` Linus Walleij
2025-10-21 10:37 ` Lee Jones
2025-10-21 10:37 ` Lee Jones
2025-10-21 12:40 ` Bartosz Golaszewski
2025-10-21 12:40 ` Bartosz Golaszewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2025101606491337a4fffe@mail.local \
--to=alexandre.belloni@bootlin.com \
--cc=Michael.Hennerich@analog.com \
--cc=andersson@kernel.org \
--cc=andrew@codeconstruct.com.au \
--cc=andrew@lunn.ch \
--cc=andy@kernel.org \
--cc=bhelgaas@google.com \
--cc=brgl@bgdev.pl \
--cc=claudiu.beznea@tuxon.dev \
--cc=conor+dt@kernel.org \
--cc=daire.mcnamara@microchip.com \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@google.com \
--cc=f.fainelli@gmail.com \
--cc=festevam@gmail.com \
--cc=geert+renesas@glider.be \
--cc=jassisinghbrar@gmail.com \
--cc=jic23@kernel.org \
--cc=joel@jms.id.au \
--cc=kishon@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=kuba@kernel.org \
--cc=kwilczynski@kernel.org \
--cc=lars@metafoo.de \
--cc=lee@kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=lpieralisi@kernel.org \
--cc=mani@kernel.org \
--cc=mchehab@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=nicolas.ferre@microchip.com \
--cc=nuno.sa@analog.com \
--cc=olteanv@gmail.com \
--cc=pabeni@redhat.com \
--cc=robh@kernel.org \
--cc=sboyd@kernel.org \
--cc=shawnguo@kernel.org \
--cc=thierry.reding@gmail.com \
--cc=tony@atomide.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.