* Re: [PATCH 1/3] arm64: dts: exynos: ExynosAutov920: Add USB and USB-phy nodes
@ 2025-10-26 0:03 kernel test robot
0 siblings, 0 replies; 3+ messages in thread
From: kernel test robot @ 2025-10-26 0:03 UTC (permalink / raw)
To: oe-kbuild; +Cc: lkp
::::::
:::::: Manual check reason: "dtcheck: binding changes may go via different trees"
::::::
BCC: lkp@intel.com
CC: oe-kbuild-all@lists.linux.dev
In-Reply-To: <20251024114845.2395166-2-pritam.sutar@samsung.com>
References: <20251024114845.2395166-2-pritam.sutar@samsung.com>
TO: Pritam Manohar Sutar <pritam.sutar@samsung.com>
TO: robh@kernel.org
TO: krzk+dt@kernel.org
TO: conor+dt@kernel.org
TO: alim.akhtar@samsung.com
CC: devicetree@vger.kernel.org
CC: linux-arm-kernel@lists.infradead.org
CC: linux-samsung-soc@vger.kernel.org
CC: linux-kernel@vger.kernel.org
CC: rosa.pila@samsung.com
CC: dev.tailor@samsung.com
CC: faraz.ata@samsung.com
CC: muhammed.ali@samsung.com
CC: selvarasu.g@samsung.com
CC: pritam.sutar@samsung.com
Hi Pritam,
kernel test robot noticed the following build warnings:
[auto build test WARNING on krzk/for-next]
[also build test WARNING on linus/master v6.18-rc2 next-20251024]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Pritam-Manohar-Sutar/arm64-dts-exynos-ExynosAutov920-Add-USB-and-USB-phy-nodes/20251024-194927
base: https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux.git for-next
patch link: https://lore.kernel.org/r/20251024114845.2395166-2-pritam.sutar%40samsung.com
patch subject: [PATCH 1/3] arm64: dts: exynos: ExynosAutov920: Add USB and USB-phy nodes
:::::: branch date: 2 days ago
:::::: commit date: 2 days ago
config: arm64-randconfig-051-20251025 (https://download.01.org/0day-ci/archive/20251026/202510260700.13XUPmdh-lkp@intel.com/config)
compiler: clang version 18.1.8 (https://github.com/llvm/llvm-project 3b5b5c1ec4a3095ab096dd780e84d7ab81f3d7ff)
dtschema version: 2025.9.dev12+gd6be03029
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20251026/202510260700.13XUPmdh-lkp@intel.com/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/r/202510260700.13XUPmdh-lkp@intel.com/
dtcheck warnings: (new ones prefixed by >>)
>> arch/arm64/boot/dts/exynos/exynosautov920-sadk.dtb: /soc@0/phy@16480000: failed to match any schema with compatible: ['samsung,exynosautov920-usb31drd-combo-ssphy']
>> arch/arm64/boot/dts/exynos/exynosautov920-sadk.dtb: /soc@0/phy@16490000: failed to match any schema with compatible: ['samsung,exynosautov920-usbdrd-combo-hsphy']
>> arch/arm64/boot/dts/exynos/exynosautov920-sadk.dtb: /soc@0/phy@16500000: failed to match any schema with compatible: ['samsung,exynosautov920-usbdrd-phy']
arch/arm64/boot/dts/exynos/exynosautov920-sadk.dtb: /soc@0/phy@16510000: failed to match any schema with compatible: ['samsung,exynosautov920-usbdrd-phy']
arch/arm64/boot/dts/exynos/exynosautov920-sadk.dtb: /soc@0/phy@16520000: failed to match any schema with compatible: ['samsung,exynosautov920-usbdrd-phy']
--
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH 1/3] arm64: dts: exynos: ExynosAutov920: Add USB and USB-phy nodes
@ 2025-10-25 11:27 kernel test robot
0 siblings, 0 replies; 3+ messages in thread
From: kernel test robot @ 2025-10-25 11:27 UTC (permalink / raw)
To: oe-kbuild; +Cc: lkp
::::::
:::::: Manual check reason: "dtcheck: binding changes may go via different trees"
::::::
BCC: lkp@intel.com
CC: oe-kbuild-all@lists.linux.dev
In-Reply-To: <20251024114845.2395166-2-pritam.sutar@samsung.com>
References: <20251024114845.2395166-2-pritam.sutar@samsung.com>
TO: Pritam Manohar Sutar <pritam.sutar@samsung.com>
TO: robh@kernel.org
TO: krzk+dt@kernel.org
TO: conor+dt@kernel.org
TO: alim.akhtar@samsung.com
CC: devicetree@vger.kernel.org
CC: linux-arm-kernel@lists.infradead.org
CC: linux-samsung-soc@vger.kernel.org
CC: linux-kernel@vger.kernel.org
CC: rosa.pila@samsung.com
CC: dev.tailor@samsung.com
CC: faraz.ata@samsung.com
CC: muhammed.ali@samsung.com
CC: selvarasu.g@samsung.com
CC: pritam.sutar@samsung.com
Hi Pritam,
kernel test robot noticed the following build warnings:
[auto build test WARNING on krzk/for-next]
[also build test WARNING on linus/master v6.18-rc2 next-20251024]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Pritam-Manohar-Sutar/arm64-dts-exynos-ExynosAutov920-Add-USB-and-USB-phy-nodes/20251024-194927
base: https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux.git for-next
patch link: https://lore.kernel.org/r/20251024114845.2395166-2-pritam.sutar%40samsung.com
patch subject: [PATCH 1/3] arm64: dts: exynos: ExynosAutov920: Add USB and USB-phy nodes
:::::: branch date: 23 hours ago
:::::: commit date: 23 hours ago
config: arm64-randconfig-051-20251025 (https://download.01.org/0day-ci/archive/20251025/202510251822.7oeos3rZ-lkp@intel.com/config)
compiler: clang version 18.1.8 (https://github.com/llvm/llvm-project 3b5b5c1ec4a3095ab096dd780e84d7ab81f3d7ff)
dtschema version: 2025.9.dev7+g3b6fdac89
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20251025/202510251822.7oeos3rZ-lkp@intel.com/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/r/202510251822.7oeos3rZ-lkp@intel.com/
dtcheck warnings: (new ones prefixed by >>)
>> arch/arm64/boot/dts/exynos/exynosautov920-sadk.dtb: /soc@0/phy@16480000: failed to match any schema with compatible: ['samsung,exynosautov920-usb31drd-combo-ssphy']
>> arch/arm64/boot/dts/exynos/exynosautov920-sadk.dtb: /soc@0/phy@16490000: failed to match any schema with compatible: ['samsung,exynosautov920-usbdrd-combo-hsphy']
>> arch/arm64/boot/dts/exynos/exynosautov920-sadk.dtb: /soc@0/phy@16500000: failed to match any schema with compatible: ['samsung,exynosautov920-usbdrd-phy']
arch/arm64/boot/dts/exynos/exynosautov920-sadk.dtb: /soc@0/phy@16510000: failed to match any schema with compatible: ['samsung,exynosautov920-usbdrd-phy']
arch/arm64/boot/dts/exynos/exynosautov920-sadk.dtb: /soc@0/phy@16520000: failed to match any schema with compatible: ['samsung,exynosautov920-usbdrd-phy']
--
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
^ permalink raw reply [flat|nested] 3+ messages in thread[parent not found: <CGME20251024114026epcas5p33c612c143853daccf21dd9515418df58@epcas5p3.samsung.com>]
* [PATCH 0/3] Add and enable USB nodes for ExynosAutov920 SoC @ 2025-10-24 11:48 ` Pritam Manohar Sutar 2025-10-24 11:48 ` [PATCH 1/3] arm64: dts: exynos: ExynosAutov920: Add USB and USB-phy nodes Pritam Manohar Sutar 0 siblings, 1 reply; 3+ messages in thread From: Pritam Manohar Sutar @ 2025-10-24 11:48 UTC (permalink / raw) To: robh, krzk+dt, conor+dt, alim.akhtar Cc: devicetree, linux-arm-kernel, linux-samsung-soc, linux-kernel, rosa.pila, dev.tailor, faraz.ata, muhammed.ali, selvarasu.g, pritam.sutar This SoC has 2 USB typeC and 2 typeA ports those are DWC3 DRD controllers and amoung them, one is USB3.1 DRD combo phy and three USB2.0 phy controllers. This patchset adds and enables USB and USB-PHY nodes in dts. PMIC driver is not implmented yet, we rely on USB LDOs being enabled by the bootloader and used dummy regulators for now. To drive vbus for host mode, it needs GPIO pin to enable vbus regulator. GPIO expander is present in the dts, we used it to enable the vbus regulator using GPIO. USB ports are configured as OTG, and default mode is configured as peripheral. These configurations might be changed based on requirements. This patchset has dependancy on schema and driver implementation[1] and role switch control from userspace[2] patches. [1]: https://lore.kernel.org/linux-phy/20251010070912.3758334-1-pritam.sutar@samsung.com/ [2]: https://lore.kernel.org/linux-usb/20251024085455.789555-1-pritam.sutar@samsung.com/ Pritam Manohar Sutar (3): arm64: dts: exynos: ExynosAutov920: Add USB and USB-phy nodes arm64: dts: exynos: ExynosAutov920: Add regulators for the USB arm64: dts: exynos: ExynosAutov920: Enable USB nodes .../boot/dts/exynos/exynosautov920-sadk.dts | 160 +++++++++++++++++ .../arm64/boot/dts/exynos/exynosautov920.dtsi | 162 ++++++++++++++++++ 2 files changed, 322 insertions(+) -- 2.34.1 ^ permalink raw reply [flat|nested] 3+ messages in thread
* [PATCH 1/3] arm64: dts: exynos: ExynosAutov920: Add USB and USB-phy nodes 2025-10-24 11:48 ` [PATCH 0/3] Add and enable USB nodes for ExynosAutov920 SoC Pritam Manohar Sutar @ 2025-10-24 11:48 ` Pritam Manohar Sutar 0 siblings, 0 replies; 3+ messages in thread From: Pritam Manohar Sutar @ 2025-10-24 11:48 UTC (permalink / raw) To: robh, krzk+dt, conor+dt, alim.akhtar Cc: devicetree, linux-arm-kernel, linux-samsung-soc, linux-kernel, rosa.pila, dev.tailor, faraz.ata, muhammed.ali, selvarasu.g, pritam.sutar Add USB and USB PHY controller nodes. Signed-off-by: Pritam Manohar Sutar <pritam.sutar@samsung.com> --- .../arm64/boot/dts/exynos/exynosautov920.dtsi | 162 ++++++++++++++++++ 1 file changed, 162 insertions(+) diff --git a/arch/arm64/boot/dts/exynos/exynosautov920.dtsi b/arch/arm64/boot/dts/exynos/exynosautov920.dtsi index 6ee74d260776..6ff0e00fd901 100644 --- a/arch/arm64/boot/dts/exynos/exynosautov920.dtsi +++ b/arch/arm64/boot/dts/exynos/exynosautov920.dtsi @@ -1409,6 +1409,168 @@ pinctrl_hsi1: pinctrl@16450000 { interrupts = <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>; }; + usbdrd31_ssphy: phy@16480000 { + compatible = "samsung,exynosautov920-usb31drd-combo-ssphy"; + reg = <0x16480000 0x0200>; + clocks = <&cmu_hsi1 CLK_MOUT_HSI1_NOC_USER>, + <&cmu_hsi1 CLK_MOUT_HSI1_USBDRD>; + clock-names = "phy", "ref"; + #phy-cells = <1>; + samsung,pmu-syscon = <&pmu_system_controller>; + status = "disabled"; + }; + + usbdrd31_hsphy: phy@16490000 { + compatible = "samsung,exynosautov920-usbdrd-combo-hsphy"; + reg = <0x16490000 0x0200>; + clocks = <&cmu_hsi1 CLK_MOUT_HSI1_NOC_USER>, + <&cmu_hsi1 CLK_MOUT_HSI1_USBDRD>; + clock-names = "phy", "ref"; + #phy-cells = <1>; + samsung,pmu-syscon = <&pmu_system_controller>; + status = "disabled"; + }; + + usbdrd20_phy0: phy@16500000 { + compatible = "samsung,exynosautov920-usbdrd-phy"; + reg = <0x16500000 0x0200>; + clocks = <&cmu_hsi1 CLK_MOUT_HSI1_NOC_USER>, + <&cmu_hsi1 CLK_MOUT_HSI1_USBDRD>; + clock-names = "phy", "ref"; + #phy-cells = <1>; + samsung,pmu-syscon = <&pmu_system_controller>; + status = "disabled"; + }; + + usbdrd20_phy1: phy@16510000 { + compatible = "samsung,exynosautov920-usbdrd-phy"; + reg = <0x16510000 0x0200>; + clocks = <&cmu_hsi1 CLK_MOUT_HSI1_NOC_USER>, + <&cmu_hsi1 CLK_MOUT_HSI1_USBDRD>; + clock-names = "phy", "ref"; + #phy-cells = <1>; + samsung,pmu-syscon = <&pmu_system_controller>; + status = "disabled"; + }; + + usbdrd20_phy2: phy@16520000 { + compatible = "samsung,exynosautov920-usbdrd-phy"; + reg = <0x16520000 0x0200>; + clocks = <&cmu_hsi1 CLK_MOUT_HSI1_NOC_USER>, + <&cmu_hsi1 CLK_MOUT_HSI1_USBDRD>; + clock-names = "phy", "ref"; + #phy-cells = <1>; + samsung,pmu-syscon = <&pmu_system_controller>; + status = "disabled"; + }; + + /* This usb port supports usb31 and usb20 speeds */ + usbdrd31: usb@16600000 { + compatible = "samsung,exynosautov920-dwusb3"; + ranges = <0x0 0x16600000 0x10000>; + clocks = <&cmu_hsi1 CLK_MOUT_HSI1_USBDRD>, + <&cmu_hsi1 CLK_MOUT_HSI1_USBDRD>; + clock-names = "ref", "susp_clk"; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + + usbdrd31_dwc3: usb@0 { + compatible = "snps,dwc3"; + reg = <0x0 0x10000>; + clocks = <&cmu_hsi1 CLK_MOUT_HSI1_USBDRD>, + <&cmu_hsi1 CLK_MOUT_HSI1_USBDRD>; + clock-names = "ref", "susp_clk"; + interrupts = <GIC_SPI 491 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usbdrd31_hsphy 0>, <&usbdrd31_ssphy 0>; + phy-names = "usb2-phy", "usb3-phy"; + snps,has-lpm-erratum; + snps,dis_u2_susphy_quirk; + snps,dis_u3_susphy_quirk; + }; + }; + + /* This usb port supports only usb20 speeds */ + usbdrd20_0: usb@16700000 { + compatible = "samsung,exynosautov920-dwusb3"; + ranges = <0x0 0x16700000 0x10000>; + clocks = <&cmu_hsi1 CLK_MOUT_HSI1_USBDRD>, + <&cmu_hsi1 CLK_MOUT_HSI1_USBDRD>; + clock-names = "ref", "susp_clk"; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + + usbdrd20_dwc3_0: usb@0 { + compatible = "snps,dwc3"; + reg = <0x0 0x10000>; + clocks = <&cmu_hsi1 CLK_MOUT_HSI1_USBDRD>, + <&cmu_hsi1 CLK_MOUT_HSI1_USBDRD>; + clock-names = "ref", "susp_clk"; + interrupts = <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usbdrd20_phy0 0>; + phy-names = "usb2-phy"; + snps,has-lpm-erratum; + snps,dis_u2_susphy_quirk; + snps,dis_u3_susphy_quirk; + snps,quirk-frame-length-adjustment = <0x20>; + }; + }; + + /* This usb port supports only usb20 speeds */ + usbdrd20_1: usb@16800000 { + compatible = "samsung,exynosautov920-dwusb3"; + ranges = <0x0 0x16800000 0x10000>; + clocks = <&cmu_hsi1 CLK_MOUT_HSI1_USBDRD>, + <&cmu_hsi1 CLK_MOUT_HSI1_USBDRD>; + clock-names = "ref", "susp_clk"; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + + usbdrd20_dwc3_1: usb@0 { + compatible = "snps,dwc3"; + reg = <0x0 0x10000>; + clocks = <&cmu_hsi1 CLK_MOUT_HSI1_USBDRD>, + <&cmu_hsi1 CLK_MOUT_HSI1_USBDRD>; + clock-names = "ref", "susp_clk"; + interrupts = <GIC_SPI 481 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usbdrd20_phy1 0>; + phy-names = "usb2-phy"; + snps,has-lpm-erratum; + snps,dis_u2_susphy_quirk; + snps,dis_u3_susphy_quirk; + snps,quirk-frame-length-adjustment = <0x20>; + }; + }; + + /* This usb port supports only usb20 speeds */ + usbdrd20_2: usb@16900000 { + compatible = "samsung,exynosautov920-dwusb3"; + ranges = <0x0 0x16900000 0x10000>; + clocks = <&cmu_hsi1 CLK_MOUT_HSI1_USBDRD>, + <&cmu_hsi1 CLK_MOUT_HSI1_USBDRD>; + clock-names = "ref", "susp_clk"; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + + usbdrd20_dwc3_2: usb@0 { + compatible = "snps,dwc3"; + reg = <0x0 0x10000>; + clocks = <&cmu_hsi1 CLK_MOUT_HSI1_USBDRD>, + <&cmu_hsi1 CLK_MOUT_HSI1_USBDRD>; + clock-names = "ref", "susp_clk"; + interrupts = <GIC_SPI 483 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usbdrd20_phy2 0>; + phy-names = "usb2-phy"; + snps,has-lpm-erratum; + snps,dis_u2_susphy_quirk; + snps,dis_u3_susphy_quirk; + snps,quirk-frame-length-adjustment = <0x20>; + }; + }; + cmu_hsi2: clock-controller@16b00000 { compatible = "samsung,exynosautov920-cmu-hsi2"; reg = <0x16b00000 0x8000>; -- 2.34.1 ^ permalink raw reply related [flat|nested] 3+ messages in thread
end of thread, other threads:[~2025-10-26 0:03 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2025-10-26 0:03 [PATCH 1/3] arm64: dts: exynos: ExynosAutov920: Add USB and USB-phy nodes kernel test robot
-- strict thread matches above, loose matches on Subject: below --
2025-10-25 11:27 kernel test robot
[not found] <CGME20251024114026epcas5p33c612c143853daccf21dd9515418df58@epcas5p3.samsung.com>
2025-10-24 11:48 ` [PATCH 0/3] Add and enable USB nodes for ExynosAutov920 SoC Pritam Manohar Sutar
2025-10-24 11:48 ` [PATCH 1/3] arm64: dts: exynos: ExynosAutov920: Add USB and USB-phy nodes Pritam Manohar Sutar
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.