[PATCH v9 08/22] KVM: VMX: Set FRED MSR intercepts

["Xin Li (Intel)" <xin@zytor.com>]

From: Xin Li <xin3.li@intel.com>

On a userspace MSR filter change, set FRED MSR intercepts.

The eight FRED MSRs, MSR_IA32_FRED_RSP[123], MSR_IA32_FRED_STKLVLS,
MSR_IA32_FRED_SSP[123] and MSR_IA32_FRED_CONFIG, are all safe to
passthrough, because each has a corresponding host and guest field
in VMCS.

Both MSR_IA32_FRED_RSP0 and MSR_IA32_FRED_SSP0 (aka MSR_IA32_PL0_SSP)
are dedicated for userspace event delivery, IOW they are NOT used in
any kernel event delivery and the execution of ERETS.  Thus KVM can
run safely with guest values in the two MSRs.  As a result, save and
restore of their guest values are deferred until vCPU context switch,
Host MSR_IA32_FRED_RSP0 is restored upon returning to userspace, and
Host MSR_IA32_PL0_SSP is managed with XRSTORS/XSAVES.

Note, FRED SSP MSRs, including MSR_IA32_PL0_SSP, are available on
any processor that enumerates FRED.  On processors that support FRED
but not CET, FRED transitions do not use these MSRs, but they remain
accessible via MSR instructions such as RDMSR and WRMSR.

Intercept MSR_IA32_PL0_SSP when CET shadow stack is not supported,
regardless of FRED support.  This ensures the guest value remains
fully virtual and does not modify the hardware FRED SSP0 MSR.

This behavior is consistent with the current setup in
vmx_recalc_msr_intercepts(), so no change is needed to the interception
logic for MSR_IA32_PL0_SSP.

Signed-off-by: Xin Li <xin3.li@intel.com>
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Tested-by: Shan Kang <shan.kang@intel.com>
Tested-by: Xuelian Guo <xuelian.guo@intel.com>
---

Changes in v7:
* Rewrite the changelog and comment, majorly for MSR_IA32_PL0_SSP.

Changes in v5:
* Skip execution of vmx_set_intercept_for_fred_msr() if FRED is
  not available or enabled (Sean).
* Use 'intercept' as the variable name to indicate whether MSR
  interception should be enabled (Sean).
* Add TB from Xuelian Guo.
---
 arch/x86/kvm/vmx/vmx.c | 47 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 47 insertions(+)

diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
index c8b5359123bf..ef9765779884 100644
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -4146,6 +4146,51 @@ void pt_update_intercept_for_msr(struct kvm_vcpu *vcpu)
 	}
 }
 
+static void vmx_set_intercept_for_fred_msr(struct kvm_vcpu *vcpu)
+{
+	bool intercept = !guest_cpu_cap_has(vcpu, X86_FEATURE_FRED);
+
+	if (!kvm_cpu_cap_has(X86_FEATURE_FRED))
+		return;
+
+	vmx_set_intercept_for_msr(vcpu, MSR_IA32_FRED_RSP1, MSR_TYPE_RW, intercept);
+	vmx_set_intercept_for_msr(vcpu, MSR_IA32_FRED_RSP2, MSR_TYPE_RW, intercept);
+	vmx_set_intercept_for_msr(vcpu, MSR_IA32_FRED_RSP3, MSR_TYPE_RW, intercept);
+	vmx_set_intercept_for_msr(vcpu, MSR_IA32_FRED_STKLVLS, MSR_TYPE_RW, intercept);
+	vmx_set_intercept_for_msr(vcpu, MSR_IA32_FRED_SSP1, MSR_TYPE_RW, intercept);
+	vmx_set_intercept_for_msr(vcpu, MSR_IA32_FRED_SSP2, MSR_TYPE_RW, intercept);
+	vmx_set_intercept_for_msr(vcpu, MSR_IA32_FRED_SSP3, MSR_TYPE_RW, intercept);
+	vmx_set_intercept_for_msr(vcpu, MSR_IA32_FRED_CONFIG, MSR_TYPE_RW, intercept);
+
+	/*
+	 * MSR_IA32_FRED_RSP0 and MSR_IA32_PL0_SSP (aka MSR_IA32_FRED_SSP0) are
+	 * designed for event delivery while executing in userspace.  Since KVM
+	 * operates entirely in kernel mode (CPL is always 0 after any VM exit),
+	 * it can safely retain and operate with guest-defined values for these
+	 * MSRs.
+	 *
+	 * As a result, interception of MSR_IA32_FRED_RSP0 and MSR_IA32_PL0_SSP
+	 * is unnecessary.
+	 *
+	 * Note: Saving and restoring MSR_IA32_PL0_SSP is part of CET supervisor
+	 * context management.  However, FRED SSP MSRs, including MSR_IA32_PL0_SSP,
+	 * are available on any processor that enumerates FRED.
+	 *
+	 * On processors that support FRED but not CET, FRED transitions do not
+	 * use these MSRs, but they remain accessible via MSR instructions such
+	 * as RDMSR and WRMSR.
+	 *
+	 * Intercept MSR_IA32_PL0_SSP when CET shadow stack is not supported,
+	 * regardless of FRED support.  This ensures the guest value remains
+	 * fully virtual and does not modify the hardware FRED SSP0 MSR.
+	 *
+	 * This behavior is consistent with the current setup in
+	 * vmx_recalc_msr_intercepts(), so no change is needed to the interception
+	 * logic for MSR_IA32_PL0_SSP.
+	 */
+	vmx_set_intercept_for_msr(vcpu, MSR_IA32_FRED_RSP0, MSR_TYPE_RW, intercept);
+}
+
 static void vmx_recalc_msr_intercepts(struct kvm_vcpu *vcpu)
 {
 	bool intercept;
@@ -4212,6 +4257,8 @@ static void vmx_recalc_msr_intercepts(struct kvm_vcpu *vcpu)
 		vmx_set_intercept_for_msr(vcpu, MSR_IA32_S_CET, MSR_TYPE_RW, intercept);
 	}
 
+	vmx_set_intercept_for_fred_msr(vcpu);
+
 	/*
 	 * x2APIC and LBR MSR intercepts are modified on-demand and cannot be
 	 * filtered by userspace.
-- 
2.51.0