All of lore.kernel.org
 help / color / mirror / Atom feed
From: Hal Feng <hal.feng@starfivetech.com>
To: "Conor Dooley" <conor+dt@kernel.org>,
	"Rob Herring" <robh@kernel.org>,
	"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
	"Palmer Dabbelt" <palmer@dabbelt.com>,
	"Paul Walmsley" <pjw@kernel.org>,
	"Albert Ou" <aou@eecs.berkeley.edu>,
	"Rafael J . Wysocki" <rafael@kernel.org>,
	"Viresh Kumar" <viresh.kumar@linaro.org>,
	"Bjorn Helgaas" <bhelgaas@google.com>,
	"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
	"Krzysztof Wilczyński" <kwilczynski@kernel.org>,
	"Manivannan Sadhasivam" <mani@kernel.org>,
	"Emil Renner Berthing" <emil.renner.berthing@canonical.com>,
	"Heinrich Schuchardt" <heinrich.schuchardt@canonical.com>,
	"E Shattow" <e@freeshell.de>
Cc: Hal Feng <hal.feng@starfivetech.com>,
	devicetree@vger.kernel.org, linux-riscv@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v2 5/8] riscv: dts: starfive: jh711x-common: Move out some nodes to jh7110 common dtsi
Date: Fri,  7 Nov 2025 17:55:27 +0800	[thread overview]
Message-ID: <20251107095530.114775-6-hal.feng@starfivetech.com> (raw)
In-Reply-To: <20251107095530.114775-1-hal.feng@starfivetech.com>

Some nodes in this file are not used by the upcoming VisionFive 2 Lite
board. Move them to the jh7110 common dtsi to prepare for adding the
new VisionFive 2 Lite device tree.

Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
---
 arch/riscv/boot/dts/starfive/jh7110-common.dtsi | 14 ++++++++++++++
 arch/riscv/boot/dts/starfive/jh711x-common.dtsi |  8 --------
 2 files changed, 14 insertions(+), 8 deletions(-)

diff --git a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
index dd5805ef70a1..cdc362b8d58b 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
@@ -25,3 +25,17 @@ opp-1500000000 {
 		opp-microvolt = <1040000>;
 	};
 };
+
+&mmc0 {
+	cap-mmc-highspeed;
+	cap-mmc-hw-reset;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&emmc_vdd>;
+};
+
+&mmc1 {
+	cd-gpios = <&sysgpio 41 GPIO_ACTIVE_LOW>;
+	disable-wp;
+};
diff --git a/arch/riscv/boot/dts/starfive/jh711x-common.dtsi b/arch/riscv/boot/dts/starfive/jh711x-common.dtsi
index 809274625615..42b8f60725fb 100644
--- a/arch/riscv/boot/dts/starfive/jh711x-common.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh711x-common.dtsi
@@ -281,14 +281,8 @@ &mmc0 {
 	assigned-clock-rates = <50000000>;
 	bus-width = <8>;
 	bootph-pre-ram;
-	cap-mmc-highspeed;
-	mmc-ddr-1_8v;
-	mmc-hs200-1_8v;
-	cap-mmc-hw-reset;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins>;
-	vmmc-supply = <&vcc_3v3>;
-	vqmmc-supply = <&emmc_vdd>;
 	status = "okay";
 };
 
@@ -298,8 +292,6 @@ &mmc1 {
 	assigned-clock-rates = <50000000>;
 	bus-width = <4>;
 	bootph-pre-ram;
-	cd-gpios = <&sysgpio 41 GPIO_ACTIVE_LOW>;
-	disable-wp;
 	cap-sd-highspeed;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins>;
-- 
2.43.2


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

WARNING: multiple messages have this Message-ID (diff)
From: Hal Feng <hal.feng@starfivetech.com>
To: "Conor Dooley" <conor+dt@kernel.org>,
	"Rob Herring" <robh@kernel.org>,
	"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
	"Palmer Dabbelt" <palmer@dabbelt.com>,
	"Paul Walmsley" <pjw@kernel.org>,
	"Albert Ou" <aou@eecs.berkeley.edu>,
	"Rafael J . Wysocki" <rafael@kernel.org>,
	"Viresh Kumar" <viresh.kumar@linaro.org>,
	"Bjorn Helgaas" <bhelgaas@google.com>,
	"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
	"Krzysztof Wilczyński" <kwilczynski@kernel.org>,
	"Manivannan Sadhasivam" <mani@kernel.org>,
	"Emil Renner Berthing" <emil.renner.berthing@canonical.com>,
	"Heinrich Schuchardt" <heinrich.schuchardt@canonical.com>,
	"E Shattow" <e@freeshell.de>
Cc: Hal Feng <hal.feng@starfivetech.com>,
	devicetree@vger.kernel.org, linux-riscv@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v2 5/8] riscv: dts: starfive: jh711x-common: Move out some nodes to jh7110 common dtsi
Date: Fri,  7 Nov 2025 17:55:27 +0800	[thread overview]
Message-ID: <20251107095530.114775-6-hal.feng@starfivetech.com> (raw)
In-Reply-To: <20251107095530.114775-1-hal.feng@starfivetech.com>

Some nodes in this file are not used by the upcoming VisionFive 2 Lite
board. Move them to the jh7110 common dtsi to prepare for adding the
new VisionFive 2 Lite device tree.

Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
---
 arch/riscv/boot/dts/starfive/jh7110-common.dtsi | 14 ++++++++++++++
 arch/riscv/boot/dts/starfive/jh711x-common.dtsi |  8 --------
 2 files changed, 14 insertions(+), 8 deletions(-)

diff --git a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
index dd5805ef70a1..cdc362b8d58b 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
@@ -25,3 +25,17 @@ opp-1500000000 {
 		opp-microvolt = <1040000>;
 	};
 };
+
+&mmc0 {
+	cap-mmc-highspeed;
+	cap-mmc-hw-reset;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&emmc_vdd>;
+};
+
+&mmc1 {
+	cd-gpios = <&sysgpio 41 GPIO_ACTIVE_LOW>;
+	disable-wp;
+};
diff --git a/arch/riscv/boot/dts/starfive/jh711x-common.dtsi b/arch/riscv/boot/dts/starfive/jh711x-common.dtsi
index 809274625615..42b8f60725fb 100644
--- a/arch/riscv/boot/dts/starfive/jh711x-common.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh711x-common.dtsi
@@ -281,14 +281,8 @@ &mmc0 {
 	assigned-clock-rates = <50000000>;
 	bus-width = <8>;
 	bootph-pre-ram;
-	cap-mmc-highspeed;
-	mmc-ddr-1_8v;
-	mmc-hs200-1_8v;
-	cap-mmc-hw-reset;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins>;
-	vmmc-supply = <&vcc_3v3>;
-	vqmmc-supply = <&emmc_vdd>;
 	status = "okay";
 };
 
@@ -298,8 +292,6 @@ &mmc1 {
 	assigned-clock-rates = <50000000>;
 	bus-width = <4>;
 	bootph-pre-ram;
-	cd-gpios = <&sysgpio 41 GPIO_ACTIVE_LOW>;
-	disable-wp;
 	cap-sd-highspeed;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins>;
-- 
2.43.2


  parent reply	other threads:[~2025-11-07  9:56 UTC|newest]

Thread overview: 72+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-11-07  9:55 [PATCH v2 0/8] Add support for StarFive VisionFive 2 Lite board Hal Feng
2025-11-07  9:55 ` Hal Feng
2025-11-07  9:55 ` [PATCH v2 1/8] dt-bindings: PCI: starfive,jh7110-pcie: Add enable-gpios property Hal Feng
2025-11-07  9:55   ` Hal Feng
2025-11-07  9:55 ` [PATCH v2 2/8] dt-bindings: riscv: Add StarFive JH7110S SoC and VisionFive 2 Lite board Hal Feng
2025-11-07  9:55   ` Hal Feng
2025-11-07  9:55 ` [PATCH v2 3/8] riscv: dts: starfive: Rename jh7110.dtsi to jh711x.dtsi Hal Feng
2025-11-07  9:55   ` Hal Feng
2025-11-07 11:18   ` E Shattow
2025-11-07 11:18     ` E Shattow
2025-11-07  9:55 ` [PATCH v2 4/8] riscv: dts: starfive: Split jh7110-common.dtsi and move opp table to it Hal Feng
2025-11-07  9:55   ` Hal Feng
2025-11-07 11:20   ` E Shattow
2025-11-07 11:20     ` E Shattow
2025-11-18 15:12   ` Heinrich Schuchardt
2025-11-18 15:12     ` Heinrich Schuchardt
2025-11-07  9:55 ` Hal Feng [this message]
2025-11-07  9:55   ` [PATCH v2 5/8] riscv: dts: starfive: jh711x-common: Move out some nodes to jh7110 common dtsi Hal Feng
2025-11-07 11:24   ` E Shattow
2025-11-07 11:24     ` E Shattow
2025-11-07  9:55 ` [PATCH v2 6/8] riscv: dts: starfive: Add common board dtsi for JH7110s and VisionFive 2 Lite variants Hal Feng
2025-11-07  9:55   ` Hal Feng
2025-11-07  9:55 ` [PATCH v2 7/8] riscv: dts: starfive: Add VisionFive 2 Lite board device tree Hal Feng
2025-11-07  9:55   ` Hal Feng
2025-11-07  9:55 ` [PATCH v2 8/8] riscv: dts: starfive: Add VisionFive 2 Lite eMMC " Hal Feng
2025-11-07  9:55   ` Hal Feng
2025-11-07 11:11 ` [PATCH v2 0/8] Add support for StarFive VisionFive 2 Lite board E Shattow
2025-11-07 11:11   ` E Shattow
2025-11-07 11:21   ` Heinrich Schuchardt
2025-11-07 11:21     ` Heinrich Schuchardt
2025-11-07 12:01     ` E Shattow
2025-11-07 12:01       ` E Shattow
2025-11-12  7:24       ` Hal Feng
2025-11-12  7:24         ` Hal Feng
2025-11-12 13:29         ` E Shattow
2025-11-12 13:29           ` E Shattow
2025-11-07 17:20     ` Conor Dooley
2025-11-07 17:20       ` Conor Dooley
2025-11-12  7:47       ` Hal Feng
2025-11-12  7:47         ` Hal Feng
2025-11-12 13:54 ` Emil Renner Berthing
2025-11-12 13:54   ` Emil Renner Berthing
2025-11-12 14:36   ` Conor Dooley
2025-11-12 14:36     ` Conor Dooley
2025-11-13  3:42   ` Hal Feng
2025-11-13  3:42     ` Hal Feng
2025-11-13 10:42     ` Emil Renner Berthing
2025-11-13 10:42       ` Emil Renner Berthing
2025-11-13 15:16       ` E Shattow
2025-11-13 15:16         ` E Shattow
2025-11-15 16:28         ` Emil Renner Berthing
2025-11-15 16:28           ` Emil Renner Berthing
2025-11-17  6:54           ` Hal Feng
2025-11-17  6:54             ` Hal Feng
2025-11-17 21:54             ` E Shattow
2025-11-17 21:54               ` E Shattow
2025-11-18  2:12               ` Hal Feng
2025-11-18  2:12                 ` Hal Feng
2025-11-18 23:10                 ` Conor Dooley
2025-11-18 23:10                   ` Conor Dooley
2025-11-19  7:04                   ` Heinrich Schuchardt
2025-11-19  7:04                     ` Heinrich Schuchardt
2025-11-19  8:26                     ` E Shattow
2025-11-19  8:26                       ` E Shattow
2025-11-19 13:27                   ` Emil Renner Berthing
2025-11-19 13:27                     ` Emil Renner Berthing
2025-11-20  0:47                     ` Conor Dooley
2025-11-20  0:47                       ` Conor Dooley
2025-11-20  2:47                       ` Hal Feng
2025-11-20  2:47                         ` Hal Feng
2025-11-20  2:38                     ` Hal Feng
2025-11-20  2:38                       ` Hal Feng

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20251107095530.114775-6-hal.feng@starfivetech.com \
    --to=hal.feng@starfivetech.com \
    --cc=aou@eecs.berkeley.edu \
    --cc=bhelgaas@google.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=e@freeshell.de \
    --cc=emil.renner.berthing@canonical.com \
    --cc=heinrich.schuchardt@canonical.com \
    --cc=krzk+dt@kernel.org \
    --cc=kwilczynski@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=lpieralisi@kernel.org \
    --cc=mani@kernel.org \
    --cc=palmer@dabbelt.com \
    --cc=pjw@kernel.org \
    --cc=rafael@kernel.org \
    --cc=robh@kernel.org \
    --cc=viresh.kumar@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.