Re: [PATCH v2 5/6] dt-bindings: iio: adc: adi,ad7380: add spi-buses property

[Rob Herring <robh@kernel.org>]

On Fri, Nov 07, 2025 at 02:52:51PM -0600, David Lechner wrote:
> Add spi-buses property to describe how many SDO lines are wired up on
> the ADC. These chips are simultaneous sampling ADCs and have one SDO
> line per channel, either 2 or 4 total depending on the part number.
> 
> Signed-off-by: David Lechner <dlechner@baylibre.com>
> ---
>  .../devicetree/bindings/iio/adc/adi,ad7380.yaml    | 22 ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml
> index b91bfb16ed6bc6c605880f81050250d1ed9c307a..9ef46cdb047d45d088e0fbc345f58c5b09083385 100644
> --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml
> @@ -62,6 +62,10 @@ properties:
>    spi-cpol: true
>    spi-cpha: true
>  
> +  spi-data-buses:
> +    minItems: 1
> +    maxItems: 4
> +

As the property is not required, what's the default?

>    vcc-supply:
>      description: A 3V to 3.6V supply that powers the chip.
>  
> @@ -245,6 +249,22 @@ allOf:
>        patternProperties:
>          "^channel@[0-3]$": false
>  
> +  # 2-channel chip can only have up to 2 buses
> +  - if:
> +      properties:
> +        compatible:
> +          enum:
> +            - adi,ad7380
> +            - adi,ad7381
> +            - adi,ad7386
> +            - adi,ad7387
> +            - adi,ad7388
> +            - adi,ad7389
> +    then:
> +      properties:
> +        spi-data-buses:
> +          maxItems: 2
> +
>  examples:
>    - |
>      #include <dt-bindings/interrupt-controller/irq.h>
> @@ -260,6 +280,7 @@ examples:
>              spi-cpol;
>              spi-cpha;
>              spi-max-frequency = <80000000>;
> +            spi-data-buses = <0>, <1>;
>  
>              interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
>              interrupt-parent = <&gpio0>;
> @@ -284,6 +305,7 @@ examples:
>              spi-cpol;
>              spi-cpha;
>              spi-max-frequency = <80000000>;
> +            spi-data-buses = <0>, <1>, <2>, <3>;

An example that doesn't look like a 1 to 1 mapping would be better. 
Otherwise, it still looks to me like you could just define the bus 
width.

>  
>              interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
>              interrupt-parent = <&gpio0>;
> 
> -- 
> 2.43.0
>