From: <gregkh@linuxfoundation.org>
To: biju.das.jz@bp.renesas.com,mkl@pengutronix.de
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] can: rcar_canfd: Fix CAN-FD mode as default" failed to apply to 6.1-stable tree
Date: Mon, 01 Dec 2025 16:58:56 +0100 [thread overview]
Message-ID: <2025120156-spirits-payroll-7475@gregkh> (raw)
The patch below does not apply to the 6.1-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y
git checkout FETCH_HEAD
git cherry-pick -x 6d849ff573722afcf5508d2800017bdd40f27eb9
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2025120156-spirits-payroll-7475@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 6d849ff573722afcf5508d2800017bdd40f27eb9 Mon Sep 17 00:00:00 2001
From: Biju Das <biju.das.jz@bp.renesas.com>
Date: Tue, 18 Nov 2025 12:39:25 +0000
Subject: [PATCH] can: rcar_canfd: Fix CAN-FD mode as default
The commit 5cff263606a1 ("can: rcar_canfd: Fix controller mode setting")
has aligned with the flow mentioned in the hardware manual for all SoCs
except R-Car Gen3 and RZ/G2L SoCs. On R-Car Gen4 and RZ/G3E SoCs, due to
the wrong logic in the commit[1] sets the default mode to FD-Only mode
instead of CAN-FD mode.
This patch sets the CAN-FD mode as the default for all SoCs by dropping
the rcar_canfd_set_mode() as some SoC requires mode setting in global
reset mode, and the rest of the SoCs in channel reset mode and update the
rcar_canfd_reset_controller() to take care of these constraints. Moreover,
the RZ/G3E and R-Car Gen4 SoCs support 3 modes compared to 2 modes on the
R-Car Gen3. Use inverted logic in rcar_canfd_reset_controller() to
simplify the code later to support FD-only mode.
[1]
commit 45721c406dcf ("can: rcar_canfd: Add support for r8a779a0 SoC")
Fixes: 5cff263606a1 ("can: rcar_canfd: Fix controller mode setting")
Cc: stable@vger.kernel.org
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20251118123926.193445-1-biju.das.jz@bp.renesas.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
diff --git a/drivers/net/can/rcar/rcar_canfd.c b/drivers/net/can/rcar/rcar_canfd.c
index 45d36adb51b7..4c0d7d26df9f 100644
--- a/drivers/net/can/rcar/rcar_canfd.c
+++ b/drivers/net/can/rcar/rcar_canfd.c
@@ -709,6 +709,11 @@ static void rcar_canfd_set_bit_reg(void __iomem *addr, u32 val)
rcar_canfd_update(val, val, addr);
}
+static void rcar_canfd_clear_bit_reg(void __iomem *addr, u32 val)
+{
+ rcar_canfd_update(val, 0, addr);
+}
+
static void rcar_canfd_update_bit_reg(void __iomem *addr, u32 mask, u32 val)
{
rcar_canfd_update(mask, val, addr);
@@ -755,25 +760,6 @@ static void rcar_canfd_set_rnc(struct rcar_canfd_global *gpriv, unsigned int ch,
rcar_canfd_set_bit(gpriv->base, RCANFD_GAFLCFG(w), rnc);
}
-static void rcar_canfd_set_mode(struct rcar_canfd_global *gpriv)
-{
- if (gpriv->info->ch_interface_mode) {
- u32 ch, val = gpriv->fdmode ? RCANFD_GEN4_FDCFG_FDOE
- : RCANFD_GEN4_FDCFG_CLOE;
-
- for_each_set_bit(ch, &gpriv->channels_mask,
- gpriv->info->max_channels)
- rcar_canfd_set_bit_reg(&gpriv->fcbase[ch].cfdcfg, val);
- } else {
- if (gpriv->fdmode)
- rcar_canfd_set_bit(gpriv->base, RCANFD_GRMCFG,
- RCANFD_GRMCFG_RCMC);
- else
- rcar_canfd_clear_bit(gpriv->base, RCANFD_GRMCFG,
- RCANFD_GRMCFG_RCMC);
- }
-}
-
static int rcar_canfd_reset_controller(struct rcar_canfd_global *gpriv)
{
struct device *dev = &gpriv->pdev->dev;
@@ -806,6 +792,16 @@ static int rcar_canfd_reset_controller(struct rcar_canfd_global *gpriv)
/* Reset Global error flags */
rcar_canfd_write(gpriv->base, RCANFD_GERFL, 0x0);
+ /* Set the controller into appropriate mode */
+ if (!gpriv->info->ch_interface_mode) {
+ if (gpriv->fdmode)
+ rcar_canfd_set_bit(gpriv->base, RCANFD_GRMCFG,
+ RCANFD_GRMCFG_RCMC);
+ else
+ rcar_canfd_clear_bit(gpriv->base, RCANFD_GRMCFG,
+ RCANFD_GRMCFG_RCMC);
+ }
+
/* Transition all Channels to reset mode */
for_each_set_bit(ch, &gpriv->channels_mask, gpriv->info->max_channels) {
rcar_canfd_clear_bit(gpriv->base,
@@ -823,10 +819,23 @@ static int rcar_canfd_reset_controller(struct rcar_canfd_global *gpriv)
dev_dbg(dev, "channel %u reset failed\n", ch);
return err;
}
- }
- /* Set the controller into appropriate mode */
- rcar_canfd_set_mode(gpriv);
+ /* Set the controller into appropriate mode */
+ if (gpriv->info->ch_interface_mode) {
+ /* Do not set CLOE and FDOE simultaneously */
+ if (!gpriv->fdmode) {
+ rcar_canfd_clear_bit_reg(&gpriv->fcbase[ch].cfdcfg,
+ RCANFD_GEN4_FDCFG_FDOE);
+ rcar_canfd_set_bit_reg(&gpriv->fcbase[ch].cfdcfg,
+ RCANFD_GEN4_FDCFG_CLOE);
+ } else {
+ rcar_canfd_clear_bit_reg(&gpriv->fcbase[ch].cfdcfg,
+ RCANFD_GEN4_FDCFG_FDOE);
+ rcar_canfd_clear_bit_reg(&gpriv->fcbase[ch].cfdcfg,
+ RCANFD_GEN4_FDCFG_CLOE);
+ }
+ }
+ }
return 0;
}
reply other threads:[~2025-12-01 15:59 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2025120156-spirits-payroll-7475@gregkh \
--to=gregkh@linuxfoundation.org \
--cc=biju.das.jz@bp.renesas.com \
--cc=mkl@pengutronix.de \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.