All of lore.kernel.org
 help / color / mirror / Atom feed
* FAILED: patch "[PATCH] can: rcar_canfd: Fix CAN-FD mode as default" failed to apply to 6.1-stable tree
@ 2025-12-01 15:58 gregkh
  0 siblings, 0 replies; only message in thread
From: gregkh @ 2025-12-01 15:58 UTC (permalink / raw)
  To: biju.das.jz, mkl; +Cc: stable


The patch below does not apply to the 6.1-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y
git checkout FETCH_HEAD
git cherry-pick -x 6d849ff573722afcf5508d2800017bdd40f27eb9
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2025120156-spirits-payroll-7475@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^..

Possible dependencies:



thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 6d849ff573722afcf5508d2800017bdd40f27eb9 Mon Sep 17 00:00:00 2001
From: Biju Das <biju.das.jz@bp.renesas.com>
Date: Tue, 18 Nov 2025 12:39:25 +0000
Subject: [PATCH] can: rcar_canfd: Fix CAN-FD mode as default

The commit 5cff263606a1 ("can: rcar_canfd: Fix controller mode setting")
has aligned with the flow mentioned in the hardware manual for all SoCs
except R-Car Gen3 and RZ/G2L SoCs. On R-Car Gen4 and RZ/G3E SoCs, due to
the wrong logic in the commit[1] sets the default mode to FD-Only mode
instead of CAN-FD mode.

This patch sets the CAN-FD mode as the default for all SoCs by dropping
the rcar_canfd_set_mode() as some SoC requires mode setting in global
reset mode, and the rest of the SoCs in channel reset mode and update the
rcar_canfd_reset_controller() to take care of these constraints. Moreover,
the RZ/G3E and R-Car Gen4 SoCs support 3 modes compared to 2 modes on the
R-Car Gen3. Use inverted logic in rcar_canfd_reset_controller() to
simplify the code later to support FD-only mode.

[1]
commit 45721c406dcf ("can: rcar_canfd: Add support for r8a779a0 SoC")

Fixes: 5cff263606a1 ("can: rcar_canfd: Fix controller mode setting")
Cc: stable@vger.kernel.org
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20251118123926.193445-1-biju.das.jz@bp.renesas.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

diff --git a/drivers/net/can/rcar/rcar_canfd.c b/drivers/net/can/rcar/rcar_canfd.c
index 45d36adb51b7..4c0d7d26df9f 100644
--- a/drivers/net/can/rcar/rcar_canfd.c
+++ b/drivers/net/can/rcar/rcar_canfd.c
@@ -709,6 +709,11 @@ static void rcar_canfd_set_bit_reg(void __iomem *addr, u32 val)
 	rcar_canfd_update(val, val, addr);
 }
 
+static void rcar_canfd_clear_bit_reg(void __iomem *addr, u32 val)
+{
+	rcar_canfd_update(val, 0, addr);
+}
+
 static void rcar_canfd_update_bit_reg(void __iomem *addr, u32 mask, u32 val)
 {
 	rcar_canfd_update(mask, val, addr);
@@ -755,25 +760,6 @@ static void rcar_canfd_set_rnc(struct rcar_canfd_global *gpriv, unsigned int ch,
 	rcar_canfd_set_bit(gpriv->base, RCANFD_GAFLCFG(w), rnc);
 }
 
-static void rcar_canfd_set_mode(struct rcar_canfd_global *gpriv)
-{
-	if (gpriv->info->ch_interface_mode) {
-		u32 ch, val = gpriv->fdmode ? RCANFD_GEN4_FDCFG_FDOE
-					    : RCANFD_GEN4_FDCFG_CLOE;
-
-		for_each_set_bit(ch, &gpriv->channels_mask,
-				 gpriv->info->max_channels)
-			rcar_canfd_set_bit_reg(&gpriv->fcbase[ch].cfdcfg, val);
-	} else {
-		if (gpriv->fdmode)
-			rcar_canfd_set_bit(gpriv->base, RCANFD_GRMCFG,
-					   RCANFD_GRMCFG_RCMC);
-		else
-			rcar_canfd_clear_bit(gpriv->base, RCANFD_GRMCFG,
-					     RCANFD_GRMCFG_RCMC);
-	}
-}
-
 static int rcar_canfd_reset_controller(struct rcar_canfd_global *gpriv)
 {
 	struct device *dev = &gpriv->pdev->dev;
@@ -806,6 +792,16 @@ static int rcar_canfd_reset_controller(struct rcar_canfd_global *gpriv)
 	/* Reset Global error flags */
 	rcar_canfd_write(gpriv->base, RCANFD_GERFL, 0x0);
 
+	/* Set the controller into appropriate mode */
+	if (!gpriv->info->ch_interface_mode) {
+		if (gpriv->fdmode)
+			rcar_canfd_set_bit(gpriv->base, RCANFD_GRMCFG,
+					   RCANFD_GRMCFG_RCMC);
+		else
+			rcar_canfd_clear_bit(gpriv->base, RCANFD_GRMCFG,
+					     RCANFD_GRMCFG_RCMC);
+	}
+
 	/* Transition all Channels to reset mode */
 	for_each_set_bit(ch, &gpriv->channels_mask, gpriv->info->max_channels) {
 		rcar_canfd_clear_bit(gpriv->base,
@@ -823,10 +819,23 @@ static int rcar_canfd_reset_controller(struct rcar_canfd_global *gpriv)
 			dev_dbg(dev, "channel %u reset failed\n", ch);
 			return err;
 		}
-	}
 
-	/* Set the controller into appropriate mode */
-	rcar_canfd_set_mode(gpriv);
+		/* Set the controller into appropriate mode */
+		if (gpriv->info->ch_interface_mode) {
+			/* Do not set CLOE and FDOE simultaneously */
+			if (!gpriv->fdmode) {
+				rcar_canfd_clear_bit_reg(&gpriv->fcbase[ch].cfdcfg,
+							 RCANFD_GEN4_FDCFG_FDOE);
+				rcar_canfd_set_bit_reg(&gpriv->fcbase[ch].cfdcfg,
+						       RCANFD_GEN4_FDCFG_CLOE);
+			} else {
+				rcar_canfd_clear_bit_reg(&gpriv->fcbase[ch].cfdcfg,
+							 RCANFD_GEN4_FDCFG_FDOE);
+				rcar_canfd_clear_bit_reg(&gpriv->fcbase[ch].cfdcfg,
+							 RCANFD_GEN4_FDCFG_CLOE);
+			}
+		}
+	}
 
 	return 0;
 }


^ permalink raw reply related	[flat|nested] only message in thread

only message in thread, other threads:[~2025-12-01 15:59 UTC | newest]

Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2025-12-01 15:58 FAILED: patch "[PATCH] can: rcar_canfd: Fix CAN-FD mode as default" failed to apply to 6.1-stable tree gregkh

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.