From: Richard Leitner <richard.leitner@linux.dev>
To: Sakari Ailus <sakari.ailus@linux.intel.com>,
Dave Stevenson <dave.stevenson@raspberrypi.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Lee Jones <lee@kernel.org>, Pavel Machek <pavel@kernel.org>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-leds@vger.kernel.org,
Richard Leitner <richard.leitner@linux.dev>,
Hans Verkuil <hverkuil@kernel.org>
Subject: [PATCH v10 8/8] media: i2c: ov9282: dynamic flash_duration maximum
Date: Tue, 09 Dec 2025 23:44:43 +0100 [thread overview]
Message-ID: <20251209-ov9282-flash-strobe-v10-8-0117cab82e2d@linux.dev> (raw)
In-Reply-To: <20251209-ov9282-flash-strobe-v10-0-0117cab82e2d@linux.dev>
This patch sets the current exposure time as maximum for the
flash_duration control. As Flash/Strobes which are longer than the
exposure time have no effect.
Signed-off-by: Richard Leitner <richard.leitner@linux.dev>
---
drivers/media/i2c/ov9282.c | 30 ++++++++++++++++++++++++++----
1 file changed, 26 insertions(+), 4 deletions(-)
diff --git a/drivers/media/i2c/ov9282.c b/drivers/media/i2c/ov9282.c
index 4c25b3e11afc0..cb8f6696d2783 100644
--- a/drivers/media/i2c/ov9282.c
+++ b/drivers/media/i2c/ov9282.c
@@ -199,6 +199,7 @@ struct ov9282_mode {
* @exp_ctrl: Pointer to exposure control
* @again_ctrl: Pointer to analog gain control
* @pixel_rate: Pointer to pixel rate control
+ * @flash_duration: Pointer to flash duration control
* @vblank: Vertical blanking in lines
* @noncontinuous_clock: Selection of CSI2 noncontinuous clock mode
* @cur_mode: Pointer to current selected sensor mode
@@ -221,6 +222,7 @@ struct ov9282 {
struct v4l2_ctrl *again_ctrl;
};
struct v4l2_ctrl *pixel_rate;
+ struct v4l2_ctrl *flash_duration;
u32 vblank;
bool noncontinuous_clock;
const struct ov9282_mode *cur_mode;
@@ -612,6 +614,15 @@ static int ov9282_update_controls(struct ov9282 *ov9282,
mode->vblank_max, 1, mode->vblank);
}
+static u32 ov9282_exposure_to_us(struct ov9282 *ov9282, u32 exposure)
+{
+ /* calculate exposure time in µs */
+ u32 frame_width = ov9282->cur_mode->width + ov9282->hblank_ctrl->val;
+ u32 trow_us = frame_width / (ov9282->pixel_rate->val / 1000000UL);
+
+ return exposure * trow_us;
+}
+
/**
* ov9282_update_exp_gain() - Set updated exposure and gain
* @ov9282: pointer to ov9282 device
@@ -623,9 +634,10 @@ static int ov9282_update_controls(struct ov9282 *ov9282,
static int ov9282_update_exp_gain(struct ov9282 *ov9282, u32 exposure, u32 gain)
{
int ret;
+ u32 exposure_us = ov9282_exposure_to_us(ov9282, exposure);
- dev_dbg(ov9282->dev, "Set exp %u, analog gain %u",
- exposure, gain);
+ dev_dbg(ov9282->dev, "Set exp %u (~%u us), analog gain %u",
+ exposure, exposure_us, gain);
ret = ov9282_write_reg(ov9282, OV9282_REG_HOLD, 1, 1);
if (ret)
@@ -636,6 +648,12 @@ static int ov9282_update_exp_gain(struct ov9282 *ov9282, u32 exposure, u32 gain)
goto error_release_group_hold;
ret = ov9282_write_reg(ov9282, OV9282_REG_AGAIN, 1, gain);
+ if (ret)
+ goto error_release_group_hold;
+
+ ret = __v4l2_ctrl_modify_range(ov9282->flash_duration,
+ 0, exposure_us, 1,
+ OV9282_STROBE_FRAME_SPAN_DEFAULT);
error_release_group_hold:
ov9282_write_reg(ov9282, OV9282_REG_HOLD, 1, 0);
@@ -1432,6 +1450,7 @@ static int ov9282_init_controls(struct ov9282 *ov9282)
const struct ov9282_mode *mode = ov9282->cur_mode;
struct v4l2_fwnode_device_properties props;
u32 hblank_min;
+ u32 exposure_us;
u32 lpfr;
int ret;
@@ -1504,8 +1523,11 @@ static int ov9282_init_controls(struct ov9282 *ov9282)
v4l2_ctrl_new_std(ctrl_hdlr, &ov9282_ctrl_ops,
V4L2_CID_FLASH_STROBE_OE, 0, 1, 1, 0);
- v4l2_ctrl_new_std(ctrl_hdlr, &ov9282_ctrl_ops, V4L2_CID_FLASH_DURATION,
- 0, 13900, 1, 8);
+ exposure_us = ov9282_exposure_to_us(ov9282, OV9282_EXPOSURE_DEFAULT);
+ ov9282->flash_duration = v4l2_ctrl_new_std(ctrl_hdlr,
+ &ov9282_ctrl_ops, V4L2_CID_FLASH_DURATION,
+ 0, exposure_us,
+ 1, OV9282_STROBE_FRAME_SPAN_DEFAULT);
ret = v4l2_fwnode_device_parse(ov9282->dev, &props);
if (!ret) {
--
2.47.3
next prev parent reply other threads:[~2025-12-09 22:44 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-12-09 22:44 [PATCH v10 0/8] Add strobe duration and strobe output enable v4l2 ctrl Richard Leitner
2025-12-09 22:44 ` [PATCH v10 1/8] media: v4l: ctrls: add a control for flash/strobe duration Richard Leitner
2025-12-09 22:44 ` [PATCH v10 2/8] media: v4l: ctrls: add a control for enabling strobe output Richard Leitner
2025-12-09 22:44 ` [PATCH v10 3/8] Documentation: uAPI: media: add V4L2_CID_FLASH_{DURATION,STROBE_OE} Richard Leitner
2025-12-09 22:44 ` [PATCH v10 4/8] media: i2c: ov9282: add output enable register definitions Richard Leitner
2025-12-09 22:44 ` [PATCH v10 5/8] media: i2c: ov9282: add strobe output enable v4l2 control Richard Leitner
2025-12-09 22:44 ` [PATCH v10 6/8] media: i2c: ov9282: add strobe_duration " Richard Leitner
2025-12-09 22:44 ` [PATCH v10 7/8] media: i2c: ov9282: implement try_ctrl for strobe_duration Richard Leitner
2025-12-09 22:44 ` Richard Leitner [this message]
2025-12-18 7:22 ` [PATCH v10 0/8] Add strobe duration and strobe output enable v4l2 ctrl Richard Leitner
2025-12-30 10:08 ` Richard Leitner
2026-01-16 7:08 ` Richard Leitner
2026-01-16 9:30 ` Sakari Ailus
2026-01-20 8:14 ` Richard Leitner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251209-ov9282-flash-strobe-v10-8-0117cab82e2d@linux.dev \
--to=richard.leitner@linux.dev \
--cc=dave.stevenson@raspberrypi.com \
--cc=hverkuil@kernel.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=lee@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=pavel@kernel.org \
--cc=sakari.ailus@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.