* [PATCH v2 1/4] dt-bindings: PCI: Convert nvidia,tegra-pcie to DT schema
2025-12-15 14:15 [PATCH v2 0/4] PCI: tegra: A couple of cleanups Anand Moon
@ 2025-12-15 14:15 ` Anand Moon
2025-12-16 5:38 ` Krzysztof Kozlowski
2025-12-22 19:35 ` kernel test robot
2025-12-15 14:15 ` [PATCH v2 2/4] PCI: tegra: Simplify clock handling by using clk_bulk*() functions Anand Moon
` (2 subsequent siblings)
3 siblings, 2 replies; 10+ messages in thread
From: Anand Moon @ 2025-12-15 14:15 UTC (permalink / raw)
To: Bjorn Helgaas, Lorenzo Pieralisi, Krzysztof Wilczyński,
Manivannan Sadhasivam, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Thierry Reding, Jonathan Hunter,
open list:PCI SUBSYSTEM,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list:TEGRA ARCHITECTURE SUPPORT, open list
Cc: Anand Moon, Mikko Perttunen
Convert the existing text-based DT bindings documentation for the
NVIDIA Tegra PCIe host controller to a DT schema format.
Cc: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
v2: Tried to address the isssue Rob pointed
[1] https://lkml.org/lkml/2025/9/26/704
improve the $suject and commit message
drop few examples only nvidia,tegra20-pcie and nvidia,tegra210-pcie
$ make dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/pci/nvidia,tegra-pcie.yaml
---
.../bindings/pci/nvidia,tegra-pcie.yaml | 380 ++++++++++
.../bindings/pci/nvidia,tegra20-pcie.txt | 670 ------------------
2 files changed, 380 insertions(+), 670 deletions(-)
create mode 100644 Documentation/devicetree/bindings/pci/nvidia,tegra-pcie.yaml
delete mode 100644 Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra-pcie.yaml b/Documentation/devicetree/bindings/pci/nvidia,tegra-pcie.yaml
new file mode 100644
index 000000000000..e542adfe37b4
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/nvidia,tegra-pcie.yaml
@@ -0,0 +1,380 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/nvidia,tegra-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra PCIe Controller
+
+maintainers:
+ - Jon Hunter <jonathanh@nvidia.com>
+ - Thierry Reding <treding@nvidia.com>
+
+description:
+ PCIe controller found on NVIDIA Tegra SoCs which supports multiple
+ root ports and platform-specific clock, reset, and power supply
+ configurations.
+
+properties:
+ compatible:
+ enum:
+ - nvidia,tegra20-pcie
+ - nvidia,tegra30-pcie
+ - nvidia,tegra124-pcie
+ - nvidia,tegra210-pcie
+ - nvidia,tegra186-pcie
+
+ reg:
+ items:
+ - description: PADS registers
+ - description: AFI registers
+ - description: Configuration space region
+
+ reg-names:
+ items:
+ - const: pads
+ - const: afi
+ - const: cs
+
+ interrupts:
+ items:
+ - description: Controller interrupt
+ - description: MSI interrupt
+
+ interrupt-names:
+ items:
+ - const: intr
+ - const: msi
+
+ clocks:
+ minItems: 3
+ items:
+ - description: PCIe clock
+ - description: AFI clock
+ - description: PLL_E clock
+ - description: Optional CML clock
+
+ clock-names:
+ description: Names of clocks used by the PCIe controller
+ minItems: 3
+ items:
+ - const: pex
+ - const: afi
+ - const: pll_e
+ - const: cml
+
+ resets:
+ items:
+ - description: PCIe reset
+ - description: AFI reset
+ - description: PCIe-X reset
+
+ reset-names:
+ items:
+ - const: pex
+ - const: afi
+ - const: pcie_x
+
+ power-domains:
+ maxItems: 1
+
+ interconnects:
+ minItems: 1
+ maxItems: 2
+
+ interconnect-names:
+ items:
+ - const: dma-mem
+ - const: write
+
+ pinctrl-names:
+ items:
+ - const: default
+ - const: idle
+
+ pinctrl-0: true
+ pinctrl-1: true
+
+ operating-points-v2:
+ description:
+ Should contain freqs and voltages and opp-supported-hw property, which
+ is a bitfield indicating SoC speedo ID mask.
+
+patternProperties:
+ "^pci@[0-9a-f]+(,[0-9a-f]+)?$":
+ type: object
+ allOf:
+ - $ref: /schemas/pci/pci-pci-bridge.yaml#
+
+ properties:
+ reg:
+ maxItems: 1
+
+ nvidia,num-lanes:
+ description: Number of lanes used by this PCIe port
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum:
+ - 1
+ - 2
+ - 4
+
+ required:
+ - nvidia,num-lanes
+
+ unevaluatedProperties: false
+
+allOf:
+ - $ref: /schemas/pci/pci-host-bridge.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - nvidia,tegra20-pcie
+ - nvidia,tegra186-pcie
+ then:
+ properties:
+ clocks:
+ maxItems: 3
+ clock-names:
+ items:
+ - const: pex
+ - const: afi
+ - const: pll_e
+ resets:
+ maxItems: 3
+ reset-names:
+ items:
+ - const: pex
+ - const: afi
+ - const: pcie_x
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - nvidia,tegra30-pcie
+ - nvidia,tegra124-pcie
+ - nvidia,tegra210-pcie
+ then:
+ properties:
+ clocks:
+ maxItems: 4
+ clock-names:
+ items:
+ - const: pex
+ - const: afi
+ - const: pll_e
+ - const: cml
+ resets:
+ maxItems: 3
+ reset-names:
+ items:
+ - const: pex
+ - const: afi
+ - const: pcie_x
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - nvidia,tegra20-pcie
+ - nvidia,tegra30-pcie
+ then:
+ required:
+ - power-domains
+ - operating-points-v2
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - nvidia,tegra186-pcie
+ then:
+ required:
+ - interconnects
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - nvidia,tegra210-pcie
+ then:
+ required:
+ - pinctrl-names
+ - pinctrl-0
+ - pinctrl-1
+
+unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+ - interrupts
+ - interrupt-map
+ - interrupt-map-mask
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ bus {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ pcie@80003000 {
+ compatible = "nvidia,tegra20-pcie";
+ device_type = "pci";
+ reg = <0x80003000 0x00000800>,
+ <0x80003800 0x00000200>,
+ <0x90000000 0x10000000>;
+ reg-names = "pads", "afi", "cs";
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "intr", "msi";
+ interrupt-parent = <&intc>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &intc GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+
+ bus-range = <0x00 0xff>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ranges = <0x02000000 0 0x80000000 0x80000000 0 0x00001000>,
+ <0x02000000 0 0x80001000 0x80001000 0 0x00001000>,
+ <0x01000000 0 0 0x82000000 0 0x00010000>,
+ <0x02000000 0 0xa0000000 0xa0000000 0 0x08000000>,
+ <0x42000000 0 0xa8000000 0xa8000000 0 0x18000000>;
+
+ clocks = <&tegra_car 70>,
+ <&tegra_car 72>,
+ <&tegra_car 118>;
+ clock-names = "pex", "afi", "pll_e";
+ resets = <&tegra_car 70>,
+ <&tegra_car 72>,
+ <&tegra_car 74>;
+ reset-names = "pex", "afi", "pcie_x";
+ power-domains = <&pd_core>;
+ operating-points-v2 = <&pcie_dvfs_opp_table>;
+
+ status = "okay";
+
+ pci@1,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0x80000000 0 0x1000>;
+ reg = <0x000800 0 0 0 0>;
+ bus-range = <0x00 0xff>;
+ status = "okay";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ nvidia,num-lanes = <2>;
+ };
+
+ pci@2,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82001000 0 0x80001000 0 0x1000>;
+ reg = <0x001000 0 0 0 0>;
+ bus-range = <0x00 0xff>;
+ status = "okay";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ nvidia,num-lanes = <2>;
+ };
+ };
+ };
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pcie@1003000 {
+ compatible = "nvidia,tegra210-pcie";
+ device_type = "pci";
+ reg = <0x0 0x01003000 0x0 0x00000800>,
+ <0x0 0x01003800 0x0 0x00000800>,
+ <0x0 0x02000000 0x0 0x10000000>;
+ reg-names = "pads", "afi", "cs";
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "intr", "msi";
+ interrupt-parent = <&gic>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+
+ bus-range = <0x00 0xff>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ranges = <0x02000000 0 0x01000000 0x0 0x01000000 0 0x00001000>,
+ <0x02000000 0 0x01001000 0x0 0x01001000 0 0x00001000>,
+ <0x01000000 0 0x0 0x0 0x12000000 0 0x00010000>,
+ <0x02000000 0 0x13000000 0x0 0x13000000 0 0x0d000000>,
+ <0x42000000 0 0x20000000 0x0 0x20000000 0 0x20000000>;
+
+ clocks = <&tegra_car 70>,
+ <&tegra_car 72>,
+ <&tegra_car 263>,
+ <&tegra_car 300>;
+ clock-names = "pex", "afi", "pll_e", "cml";
+ resets = <&tegra_car 70>,
+ <&tegra_car 72>,
+ <&tegra_car 74>;
+ reset-names = "pex", "afi", "pcie_x";
+
+ pinctrl-names = "default", "idle";
+ pinctrl-0 = <&pex_dpd_disable>;
+ pinctrl-1 = <&pex_dpd_enable>;
+
+ status = "okay";
+
+ pci@1,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0x01000000 0 0x1000>;
+ reg = <0x000800 0 0 0 0>;
+ bus-range = <0x00 0xff>;
+ status = "okay";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ nvidia,num-lanes = <4>;
+ };
+
+ pci@2,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82001000 0 0x01001000 0 0x1000>;
+ reg = <0x001000 0 0 0 0>;
+ bus-range = <0x00 0xff>;
+ status = "okay";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ nvidia,num-lanes = <1>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
deleted file mode 100644
index d099f3476ccc..000000000000
--- a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
+++ /dev/null
@@ -1,670 +0,0 @@
-NVIDIA Tegra PCIe controller
-
-Required properties:
-- compatible: Must be:
- - "nvidia,tegra20-pcie": for Tegra20
- - "nvidia,tegra30-pcie": for Tegra30
- - "nvidia,tegra124-pcie": for Tegra124 and Tegra132
- - "nvidia,tegra210-pcie": for Tegra210
- - "nvidia,tegra186-pcie": for Tegra186
-- power-domains: To ungate power partition by BPMP powergate driver. Must
- contain BPMP phandle and PCIe power partition ID. This is required only
- for Tegra186.
-- device_type: Must be "pci"
-- reg: A list of physical base address and length for each set of controller
- registers. Must contain an entry for each entry in the reg-names property.
-- reg-names: Must include the following entries:
- "pads": PADS registers
- "afi": AFI registers
- "cs": configuration space region
-- interrupts: A list of interrupt outputs of the controller. Must contain an
- entry for each entry in the interrupt-names property.
-- interrupt-names: Must include the following entries:
- "intr": The Tegra interrupt that is asserted for controller interrupts
- "msi": The Tegra interrupt that is asserted when an MSI is received
-- bus-range: Range of bus numbers associated with this controller
-- #address-cells: Address representation for root ports (must be 3)
- - cell 0 specifies the bus and device numbers of the root port:
- [23:16]: bus number
- [15:11]: device number
- - cell 1 denotes the upper 32 address bits and should be 0
- - cell 2 contains the lower 32 address bits and is used to translate to the
- CPU address space
-- #size-cells: Size representation for root ports (must be 2)
-- ranges: Describes the translation of addresses for root ports and standard
- PCI regions. The entries must be 6 cells each, where the first three cells
- correspond to the address as described for the #address-cells property
- above, the fourth cell is the physical CPU address to translate to and the
- fifth and six cells are as described for the #size-cells property above.
- - The first two entries are expected to translate the addresses for the root
- port registers, which are referenced by the assigned-addresses property of
- the root port nodes (see below).
- - The remaining entries setup the mapping for the standard I/O, memory and
- prefetchable PCI regions. The first cell determines the type of region
- that is setup:
- - 0x81000000: I/O memory region
- - 0x82000000: non-prefetchable memory region
- - 0xc2000000: prefetchable memory region
- Please refer to the standard PCI bus binding document for a more detailed
- explanation.
-- #interrupt-cells: Size representation for interrupts (must be 1)
-- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties
- Please refer to the standard PCI bus binding document for a more detailed
- explanation.
-- clocks: Must contain an entry for each entry in clock-names.
- See ../clocks/clock-bindings.txt for details.
-- clock-names: Must include the following entries:
- - pex
- - afi
- - pll_e
- - cml (not required for Tegra20)
-- resets: Must contain an entry for each entry in reset-names.
- See ../reset/reset.txt for details.
-- reset-names: Must include the following entries:
- - pex
- - afi
- - pcie_x
-
-Optional properties:
-- pinctrl-names: A list of pinctrl state names. Must contain the following
- entries:
- - "default": active state, puts PCIe I/O out of deep power down state
- - "idle": puts PCIe I/O into deep power down state
-- pinctrl-0: phandle for the default/active state of pin configurations.
-- pinctrl-1: phandle for the idle state of pin configurations.
-
-Required properties on Tegra124 and later (deprecated):
-- phys: Must contain an entry for each entry in phy-names.
-- phy-names: Must include the following entries:
- - pcie
-
-These properties are deprecated in favour of per-lane PHYs define in each of
-the root ports (see below).
-
-Power supplies for Tegra20:
-- avdd-pex-supply: Power supply for analog PCIe logic. Must supply 1.05 V.
-- vdd-pex-supply: Power supply for digital PCIe I/O. Must supply 1.05 V.
-- avdd-pex-pll-supply: Power supply for dedicated (internal) PCIe PLL. Must
- supply 1.05 V.
-- avdd-plle-supply: Power supply for PLLE, which is shared with SATA. Must
- supply 1.05 V.
-- vddio-pex-clk-supply: Power supply for PCIe clock. Must supply 3.3 V.
-
-Power supplies for Tegra30:
-- Required:
- - avdd-pex-pll-supply: Power supply for dedicated (internal) PCIe PLL. Must
- supply 1.05 V.
- - avdd-plle-supply: Power supply for PLLE, which is shared with SATA. Must
- supply 1.05 V.
- - vddio-pex-ctl-supply: Power supply for PCIe control I/O partition. Must
- supply 1.8 V.
- - hvdd-pex-supply: High-voltage supply for PCIe I/O and PCIe output clocks.
- Must supply 3.3 V.
-- Optional:
- - If lanes 0 to 3 are used:
- - avdd-pexa-supply: Power supply for analog PCIe logic. Must supply 1.05 V.
- - vdd-pexa-supply: Power supply for digital PCIe I/O. Must supply 1.05 V.
- - If lanes 4 or 5 are used:
- - avdd-pexb-supply: Power supply for analog PCIe logic. Must supply 1.05 V.
- - vdd-pexb-supply: Power supply for digital PCIe I/O. Must supply 1.05 V.
-
-Power supplies for Tegra124:
-- Required:
- - avddio-pex-supply: Power supply for analog PCIe logic. Must supply 1.05 V.
- - dvddio-pex-supply: Power supply for digital PCIe I/O. Must supply 1.05 V.
- - hvdd-pex-supply: High-voltage supply for PCIe I/O and PCIe output clocks.
- Must supply 3.3 V.
- - vddio-pex-ctl-supply: Power supply for PCIe control I/O partition. Must
- supply 2.8-3.3 V.
-
-Power supplies for Tegra210:
-- Required:
- - hvddio-pex-supply: High-voltage supply for PCIe I/O and PCIe output
- clocks. Must supply 1.8 V.
- - dvddio-pex-supply: Power supply for digital PCIe I/O. Must supply 1.05 V.
- - vddio-pex-ctl-supply: Power supply for PCIe control I/O partition. Must
- supply 1.8 V.
-
-Power supplies for Tegra186:
-- Required:
- - dvdd-pex-supply: Power supply for digital PCIe I/O. Must supply 1.05 V.
- - hvdd-pex-pll-supply: High-voltage supply for PLLE (shared with USB3). Must
- supply 1.8 V.
- - hvdd-pex-supply: High-voltage supply for PCIe I/O and PCIe output clocks.
- Must supply 1.8 V.
- - vddio-pexctl-aud-supply: Power supply for PCIe side band signals. Must
- supply 1.8 V.
-
-Root ports are defined as subnodes of the PCIe controller node.
-
-Required properties:
-- device_type: Must be "pci"
-- assigned-addresses: Address and size of the port configuration registers
-- reg: PCI bus address of the root port
-- #address-cells: Must be 3
-- #size-cells: Must be 2
-- ranges: Sub-ranges distributed from the PCIe controller node. An empty
- property is sufficient.
-- nvidia,num-lanes: Number of lanes to use for this port. Valid combinations
- are:
- - Root port 0 uses 4 lanes, root port 1 is unused.
- - Both root ports use 2 lanes.
-
-Required properties for Tegra124 and later:
-- phys: Must contain an phandle to a PHY for each entry in phy-names.
-- phy-names: Must include an entry for each active lane. Note that the number
- of entries does not have to (though usually will) be equal to the specified
- number of lanes in the nvidia,num-lanes property. Entries are of the form
- "pcie-N": where N ranges from 0 to the value specified in nvidia,num-lanes.
-
-Examples:
-=========
-
-Tegra20:
---------
-
-SoC DTSI:
-
- pcie-controller@80003000 {
- compatible = "nvidia,tegra20-pcie";
- device_type = "pci";
- reg = <0x80003000 0x00000800 /* PADS registers */
- 0x80003800 0x00000200 /* AFI registers */
- 0x90000000 0x10000000>; /* configuration space */
- reg-names = "pads", "afi", "cs";
- interrupts = <0 98 0x04 /* controller interrupt */
- 0 99 0x04>; /* MSI interrupt */
- interrupt-names = "intr", "msi";
-
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &intc GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-
- bus-range = <0x00 0xff>;
- #address-cells = <3>;
- #size-cells = <2>;
-
- ranges = <0x82000000 0 0x80000000 0x80000000 0 0x00001000 /* port 0 registers */
- 0x82000000 0 0x80001000 0x80001000 0 0x00001000 /* port 1 registers */
- 0x81000000 0 0 0x82000000 0 0x00010000 /* downstream I/O */
- 0x82000000 0 0xa0000000 0xa0000000 0 0x10000000 /* non-prefetchable memory */
- 0xc2000000 0 0xb0000000 0xb0000000 0 0x10000000>; /* prefetchable memory */
-
- clocks = <&tegra_car 70>, <&tegra_car 72>, <&tegra_car 118>;
- clock-names = "pex", "afi", "pll_e";
- resets = <&tegra_car 70>, <&tegra_car 72>, <&tegra_car 74>;
- reset-names = "pex", "afi", "pcie_x";
- status = "disabled";
-
- pci@1,0 {
- device_type = "pci";
- assigned-addresses = <0x82000800 0 0x80000000 0 0x1000>;
- reg = <0x000800 0 0 0 0>;
- status = "disabled";
-
- #address-cells = <3>;
- #size-cells = <2>;
-
- ranges;
-
- nvidia,num-lanes = <2>;
- };
-
- pci@2,0 {
- device_type = "pci";
- assigned-addresses = <0x82001000 0 0x80001000 0 0x1000>;
- reg = <0x001000 0 0 0 0>;
- status = "disabled";
-
- #address-cells = <3>;
- #size-cells = <2>;
-
- ranges;
-
- nvidia,num-lanes = <2>;
- };
- };
-
-Board DTS:
-
- pcie-controller@80003000 {
- status = "okay";
-
- vdd-supply = <&pci_vdd_reg>;
- pex-clk-supply = <&pci_clk_reg>;
-
- /* root port 00:01.0 */
- pci@1,0 {
- status = "okay";
-
- /* bridge 01:00.0 (optional) */
- pci@0,0 {
- reg = <0x010000 0 0 0 0>;
-
- #address-cells = <3>;
- #size-cells = <2>;
-
- device_type = "pci";
-
- /* endpoint 02:00.0 */
- pci@0,0 {
- reg = <0x020000 0 0 0 0>;
- };
- };
- };
- };
-
-Note that devices on the PCI bus are dynamically discovered using PCI's bus
-enumeration and therefore don't need corresponding device nodes in DT. However
-if a device on the PCI bus provides a non-probeable bus such as I2C or SPI,
-device nodes need to be added in order to allow the bus' children to be
-instantiated at the proper location in the operating system's device tree (as
-illustrated by the optional nodes in the example above).
-
-Tegra30:
---------
-
-SoC DTSI:
-
- pcie-controller@3000 {
- compatible = "nvidia,tegra30-pcie";
- device_type = "pci";
- reg = <0x00003000 0x00000800 /* PADS registers */
- 0x00003800 0x00000200 /* AFI registers */
- 0x10000000 0x10000000>; /* configuration space */
- reg-names = "pads", "afi", "cs";
- interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH /* controller interrupt */
- GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
- interrupt-names = "intr", "msi";
-
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &intc GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-
- bus-range = <0x00 0xff>;
- #address-cells = <3>;
- #size-cells = <2>;
-
- ranges = <0x82000000 0 0x00000000 0x00000000 0 0x00001000 /* port 0 configuration space */
- 0x82000000 0 0x00001000 0x00001000 0 0x00001000 /* port 1 configuration space */
- 0x82000000 0 0x00004000 0x00004000 0 0x00001000 /* port 2 configuration space */
- 0x81000000 0 0 0x02000000 0 0x00010000 /* downstream I/O */
- 0x82000000 0 0x20000000 0x20000000 0 0x08000000 /* non-prefetchable memory */
- 0xc2000000 0 0x28000000 0x28000000 0 0x18000000>; /* prefetchable memory */
-
- clocks = <&tegra_car TEGRA30_CLK_PCIE>,
- <&tegra_car TEGRA30_CLK_AFI>,
- <&tegra_car TEGRA30_CLK_PLL_E>,
- <&tegra_car TEGRA30_CLK_CML0>;
- clock-names = "pex", "afi", "pll_e", "cml";
- resets = <&tegra_car 70>,
- <&tegra_car 72>,
- <&tegra_car 74>;
- reset-names = "pex", "afi", "pcie_x";
- status = "disabled";
-
- pci@1,0 {
- device_type = "pci";
- assigned-addresses = <0x82000800 0 0x00000000 0 0x1000>;
- reg = <0x000800 0 0 0 0>;
- status = "disabled";
-
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- nvidia,num-lanes = <2>;
- };
-
- pci@2,0 {
- device_type = "pci";
- assigned-addresses = <0x82001000 0 0x00001000 0 0x1000>;
- reg = <0x001000 0 0 0 0>;
- status = "disabled";
-
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- nvidia,num-lanes = <2>;
- };
-
- pci@3,0 {
- device_type = "pci";
- assigned-addresses = <0x82001800 0 0x00004000 0 0x1000>;
- reg = <0x001800 0 0 0 0>;
- status = "disabled";
-
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- nvidia,num-lanes = <2>;
- };
- };
-
-Board DTS:
-
- pcie-controller@3000 {
- status = "okay";
-
- avdd-pexa-supply = <&ldo1_reg>;
- vdd-pexa-supply = <&ldo1_reg>;
- avdd-pexb-supply = <&ldo1_reg>;
- vdd-pexb-supply = <&ldo1_reg>;
- avdd-pex-pll-supply = <&ldo1_reg>;
- avdd-plle-supply = <&ldo1_reg>;
- vddio-pex-ctl-supply = <&sys_3v3_reg>;
- hvdd-pex-supply = <&sys_3v3_pexs_reg>;
-
- pci@1,0 {
- status = "okay";
- };
-
- pci@3,0 {
- status = "okay";
- };
- };
-
-Tegra124:
----------
-
-SoC DTSI:
-
- pcie-controller@1003000 {
- compatible = "nvidia,tegra124-pcie";
- device_type = "pci";
- reg = <0x0 0x01003000 0x0 0x00000800 /* PADS registers */
- 0x0 0x01003800 0x0 0x00000800 /* AFI registers */
- 0x0 0x02000000 0x0 0x10000000>; /* configuration space */
- reg-names = "pads", "afi", "cs";
- interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
- <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
- interrupt-names = "intr", "msi";
-
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-
- bus-range = <0x00 0xff>;
- #address-cells = <3>;
- #size-cells = <2>;
-
- ranges = <0x82000000 0 0x01000000 0x0 0x01000000 0 0x00001000 /* port 0 configuration space */
- 0x82000000 0 0x01001000 0x0 0x01001000 0 0x00001000 /* port 1 configuration space */
- 0x81000000 0 0x0 0x0 0x12000000 0 0x00010000 /* downstream I/O (64 KiB) */
- 0x82000000 0 0x13000000 0x0 0x13000000 0 0x0d000000 /* non-prefetchable memory (208 MiB) */
- 0xc2000000 0 0x20000000 0x0 0x20000000 0 0x20000000>; /* prefetchable memory (512 MiB) */
-
- clocks = <&tegra_car TEGRA124_CLK_PCIE>,
- <&tegra_car TEGRA124_CLK_AFI>,
- <&tegra_car TEGRA124_CLK_PLL_E>,
- <&tegra_car TEGRA124_CLK_CML0>;
- clock-names = "pex", "afi", "pll_e", "cml";
- resets = <&tegra_car 70>,
- <&tegra_car 72>,
- <&tegra_car 74>;
- reset-names = "pex", "afi", "pcie_x";
- status = "disabled";
-
- pci@1,0 {
- device_type = "pci";
- assigned-addresses = <0x82000800 0 0x01000000 0 0x1000>;
- reg = <0x000800 0 0 0 0>;
- status = "disabled";
-
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- nvidia,num-lanes = <2>;
- };
-
- pci@2,0 {
- device_type = "pci";
- assigned-addresses = <0x82001000 0 0x01001000 0 0x1000>;
- reg = <0x001000 0 0 0 0>;
- status = "disabled";
-
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- nvidia,num-lanes = <1>;
- };
- };
-
-Board DTS:
-
- pcie-controller@1003000 {
- status = "okay";
-
- avddio-pex-supply = <&vdd_1v05_run>;
- dvddio-pex-supply = <&vdd_1v05_run>;
- avdd-pex-pll-supply = <&vdd_1v05_run>;
- hvdd-pex-supply = <&vdd_3v3_lp0>;
- hvdd-pex-pll-e-supply = <&vdd_3v3_lp0>;
- vddio-pex-ctl-supply = <&vdd_3v3_lp0>;
- avdd-pll-erefe-supply = <&avdd_1v05_run>;
-
- /* Mini PCIe */
- pci@1,0 {
- phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-4}>;
- phy-names = "pcie-0";
- status = "okay";
- };
-
- /* Gigabit Ethernet */
- pci@2,0 {
- phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-2}>;
- phy-names = "pcie-0";
- status = "okay";
- };
- };
-
-Tegra210:
----------
-
-SoC DTSI:
-
- pcie-controller@1003000 {
- compatible = "nvidia,tegra210-pcie";
- device_type = "pci";
- reg = <0x0 0x01003000 0x0 0x00000800 /* PADS registers */
- 0x0 0x01003800 0x0 0x00000800 /* AFI registers */
- 0x0 0x02000000 0x0 0x10000000>; /* configuration space */
- reg-names = "pads", "afi", "cs";
- interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
- <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
- interrupt-names = "intr", "msi";
-
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-
- bus-range = <0x00 0xff>;
- #address-cells = <3>;
- #size-cells = <2>;
-
- ranges = <0x82000000 0 0x01000000 0x0 0x01000000 0 0x00001000 /* port 0 configuration space */
- 0x82000000 0 0x01001000 0x0 0x01001000 0 0x00001000 /* port 1 configuration space */
- 0x81000000 0 0x0 0x0 0x12000000 0 0x00010000 /* downstream I/O (64 KiB) */
- 0x82000000 0 0x13000000 0x0 0x13000000 0 0x0d000000 /* non-prefetchable memory (208 MiB) */
- 0xc2000000 0 0x20000000 0x0 0x20000000 0 0x20000000>; /* prefetchable memory (512 MiB) */
-
- clocks = <&tegra_car TEGRA210_CLK_PCIE>,
- <&tegra_car TEGRA210_CLK_AFI>,
- <&tegra_car TEGRA210_CLK_PLL_E>,
- <&tegra_car TEGRA210_CLK_CML0>;
- clock-names = "pex", "afi", "pll_e", "cml";
- resets = <&tegra_car 70>,
- <&tegra_car 72>,
- <&tegra_car 74>;
- reset-names = "pex", "afi", "pcie_x";
- status = "disabled";
-
- pci@1,0 {
- device_type = "pci";
- assigned-addresses = <0x82000800 0 0x01000000 0 0x1000>;
- reg = <0x000800 0 0 0 0>;
- status = "disabled";
-
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- nvidia,num-lanes = <4>;
- };
-
- pci@2,0 {
- device_type = "pci";
- assigned-addresses = <0x82001000 0 0x01001000 0 0x1000>;
- reg = <0x001000 0 0 0 0>;
- status = "disabled";
-
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- nvidia,num-lanes = <1>;
- };
- };
-
-Board DTS:
-
- pcie-controller@1003000 {
- status = "okay";
-
- avdd-pll-uerefe-supply = <&avdd_1v05_pll>;
- hvddio-pex-supply = <&vdd_1v8>;
- dvddio-pex-supply = <&vdd_pex_1v05>;
- dvdd-pex-pll-supply = <&vdd_pex_1v05>;
- hvdd-pex-pll-e-supply = <&vdd_1v8>;
- vddio-pex-ctl-supply = <&vdd_1v8>;
-
- pci@1,0 {
- phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>,
- <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>,
- <&{/padctl@7009f000/pads/pcie/lanes/pcie-2}>,
- <&{/padctl@7009f000/pads/pcie/lanes/pcie-3}>;
- phy-names = "pcie-0", "pcie-1", "pcie-2", "pcie-3";
- status = "okay";
- };
-
- pci@2,0 {
- phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-4}>;
- phy-names = "pcie-0";
- status = "okay";
- };
- };
-
-Tegra186:
----------
-
-SoC DTSI:
-
- pcie@10003000 {
- compatible = "nvidia,tegra186-pcie";
- power-domains = <&bpmp TEGRA186_POWER_DOMAIN_PCX>;
- device_type = "pci";
- reg = <0x0 0x10003000 0x0 0x00000800 /* PADS registers */
- 0x0 0x10003800 0x0 0x00000800 /* AFI registers */
- 0x0 0x40000000 0x0 0x10000000>; /* configuration space */
- reg-names = "pads", "afi", "cs";
-
- interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
- <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
- interrupt-names = "intr", "msi";
-
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-
- bus-range = <0x00 0xff>;
- #address-cells = <3>;
- #size-cells = <2>;
-
- ranges = <0x82000000 0 0x10000000 0x0 0x10000000 0 0x00001000 /* port 0 configuration space */
- 0x82000000 0 0x10001000 0x0 0x10001000 0 0x00001000 /* port 1 configuration space */
- 0x82000000 0 0x10004000 0x0 0x10004000 0 0x00001000 /* port 2 configuration space */
- 0x81000000 0 0x0 0x0 0x50000000 0 0x00010000 /* downstream I/O (64 KiB) */
- 0x82000000 0 0x50100000 0x0 0x50100000 0 0x07F00000 /* non-prefetchable memory (127 MiB) */
- 0xc2000000 0 0x58000000 0x0 0x58000000 0 0x28000000>; /* prefetchable memory (640 MiB) */
-
- clocks = <&bpmp TEGRA186_CLK_AFI>,
- <&bpmp TEGRA186_CLK_PCIE>,
- <&bpmp TEGRA186_CLK_PLLE>;
- clock-names = "afi", "pex", "pll_e";
-
- resets = <&bpmp TEGRA186_RESET_AFI>,
- <&bpmp TEGRA186_RESET_PCIE>,
- <&bpmp TEGRA186_RESET_PCIEXCLK>;
- reset-names = "afi", "pex", "pcie_x";
-
- status = "disabled";
-
- pci@1,0 {
- device_type = "pci";
- assigned-addresses = <0x82000800 0 0x10000000 0 0x1000>;
- reg = <0x000800 0 0 0 0>;
- status = "disabled";
-
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- nvidia,num-lanes = <2>;
- };
-
- pci@2,0 {
- device_type = "pci";
- assigned-addresses = <0x82001000 0 0x10001000 0 0x1000>;
- reg = <0x001000 0 0 0 0>;
- status = "disabled";
-
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- nvidia,num-lanes = <1>;
- };
-
- pci@3,0 {
- device_type = "pci";
- assigned-addresses = <0x82001800 0 0x10004000 0 0x1000>;
- reg = <0x001800 0 0 0 0>;
- status = "disabled";
-
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- nvidia,num-lanes = <1>;
- };
- };
-
-Board DTS:
-
- pcie@10003000 {
- status = "okay";
-
- dvdd-pex-supply = <&vdd_pex>;
- hvdd-pex-pll-supply = <&vdd_1v8>;
- hvdd-pex-supply = <&vdd_1v8>;
- vddio-pexctl-aud-supply = <&vdd_1v8>;
-
- pci@1,0 {
- nvidia,num-lanes = <4>;
- status = "okay";
- };
-
- pci@2,0 {
- nvidia,num-lanes = <0>;
- status = "disabled";
- };
-
- pci@3,0 {
- nvidia,num-lanes = <1>;
- status = "disabled";
- };
- };
--
2.50.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH v2 2/4] PCI: tegra: Simplify clock handling by using clk_bulk*() functions
2025-12-15 14:15 [PATCH v2 0/4] PCI: tegra: A couple of cleanups Anand Moon
2025-12-15 14:15 ` [PATCH v2 1/4] dt-bindings: PCI: Convert nvidia,tegra-pcie to DT schema Anand Moon
@ 2025-12-15 14:15 ` Anand Moon
2025-12-15 14:15 ` [PATCH v2 3/4] PCI: tegra: Use readl_poll_timeout() for link status polling Anand Moon
2025-12-15 14:15 ` [PATCH v2 4/4] PCI: tegra: Use BIT() and GENMASK() macros for register definitions Anand Moon
3 siblings, 0 replies; 10+ messages in thread
From: Anand Moon @ 2025-12-15 14:15 UTC (permalink / raw)
To: Lorenzo Pieralisi, Krzysztof Wilczyński,
Manivannan Sadhasivam, Rob Herring, Bjorn Helgaas,
Krzysztof Kozlowski, Conor Dooley, Thierry Reding,
Jonathan Hunter,
open list:PCI NATIVE HOST BRIDGE AND ENDPOINT DRIVERS,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list:TEGRA ARCHITECTURE SUPPORT, open list
Cc: Anand Moon, Mikko Perttunen
Currently, the driver acquires clocks and prepare/enable/disable/unprepare
the clocks individually thereby making the driver complex to read.
The driver can be simplified by using the clk_bulk*() APIs.
Use:
- devm_clk_bulk_get_all() API to acquire all the clocks
- clk_bulk_prepare_enable() to prepare/enable clocks
- clk_bulk_disable_unprepare() APIs to disable/unprepare them in bulk
As part of this cleanup:
- Remove the legacy has_cml_clk flag
- Drop explicit handling of individual clocks (pex, afi, pll_e, cml)
- Rely on device tree ordering for clock sequencing, eliminating
hardcoded logic and improving readability and maintainability
This improves clarity, and makes future changes easier for maintainers.
Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
v2: Switch back to devm_clk_bulk_get_all from devm_clk_bulk_get()
Mani - But you are converting it to .yaml, so you can safely
use devm_clk_bulk_get_all()
v1: Switch from devm_clk_bulk_get_all() -> devm_clk_bulk_get() with
fix clks array.
nvidia,tegra20-pcie and nvidia,tegra186-pcie uses three clocks
pex, afi, pll_e
where as nvidia,tegra30-pcie, nvidia,tegra124-pcie, nvidia,tegra210-pcie
uses four clks
pex, afi, pll_e, cml
---
drivers/pci/controller/pci-tegra.c | 71 +++++-------------------------
1 file changed, 12 insertions(+), 59 deletions(-)
diff --git a/drivers/pci/controller/pci-tegra.c b/drivers/pci/controller/pci-tegra.c
index 942ddfca3bf6..275d9295789a 100644
--- a/drivers/pci/controller/pci-tegra.c
+++ b/drivers/pci/controller/pci-tegra.c
@@ -298,7 +298,6 @@ struct tegra_pcie_soc {
bool has_pex_clkreq_en;
bool has_pex_bias_ctrl;
bool has_intr_prsnt_sense;
- bool has_cml_clk;
bool has_gen2;
bool force_pca_enable;
bool program_uphy;
@@ -331,10 +330,8 @@ struct tegra_pcie {
struct resource cs;
- struct clk *pex_clk;
- struct clk *afi_clk;
- struct clk *pll_e;
- struct clk *cml_clk;
+ struct clk_bulk_data *clks;
+ int num_clks;
struct reset_control *pex_rst;
struct reset_control *afi_rst;
@@ -1154,15 +1151,11 @@ static void tegra_pcie_enable_controller(struct tegra_pcie *pcie)
static void tegra_pcie_power_off(struct tegra_pcie *pcie)
{
struct device *dev = pcie->dev;
- const struct tegra_pcie_soc *soc = pcie->soc;
int err;
reset_control_assert(pcie->afi_rst);
- clk_disable_unprepare(pcie->pll_e);
- if (soc->has_cml_clk)
- clk_disable_unprepare(pcie->cml_clk);
- clk_disable_unprepare(pcie->afi_clk);
+ clk_bulk_disable_unprepare(pcie->num_clks, pcie->clks);
if (!dev->pm_domain)
tegra_powergate_power_off(TEGRA_POWERGATE_PCIE);
@@ -1175,7 +1168,6 @@ static void tegra_pcie_power_off(struct tegra_pcie *pcie)
static int tegra_pcie_power_on(struct tegra_pcie *pcie)
{
struct device *dev = pcie->dev;
- const struct tegra_pcie_soc *soc = pcie->soc;
int err;
reset_control_assert(pcie->pcie_xrst);
@@ -1203,35 +1195,16 @@ static int tegra_pcie_power_on(struct tegra_pcie *pcie)
}
}
- err = clk_prepare_enable(pcie->afi_clk);
+ err = clk_bulk_prepare_enable(pcie->num_clks, pcie->clks);
if (err < 0) {
- dev_err(dev, "failed to enable AFI clock: %d\n", err);
+ dev_err(dev, "filed to enable clocks: %d\n", err);
goto powergate;
}
- if (soc->has_cml_clk) {
- err = clk_prepare_enable(pcie->cml_clk);
- if (err < 0) {
- dev_err(dev, "failed to enable CML clock: %d\n", err);
- goto disable_afi_clk;
- }
- }
-
- err = clk_prepare_enable(pcie->pll_e);
- if (err < 0) {
- dev_err(dev, "failed to enable PLLE clock: %d\n", err);
- goto disable_cml_clk;
- }
-
reset_control_deassert(pcie->afi_rst);
return 0;
-disable_cml_clk:
- if (soc->has_cml_clk)
- clk_disable_unprepare(pcie->cml_clk);
-disable_afi_clk:
- clk_disable_unprepare(pcie->afi_clk);
powergate:
if (!dev->pm_domain)
tegra_powergate_power_off(TEGRA_POWERGATE_PCIE);
@@ -1255,25 +1228,11 @@ static void tegra_pcie_apply_pad_settings(struct tegra_pcie *pcie)
static int tegra_pcie_clocks_get(struct tegra_pcie *pcie)
{
struct device *dev = pcie->dev;
- const struct tegra_pcie_soc *soc = pcie->soc;
-
- pcie->pex_clk = devm_clk_get(dev, "pex");
- if (IS_ERR(pcie->pex_clk))
- return PTR_ERR(pcie->pex_clk);
- pcie->afi_clk = devm_clk_get(dev, "afi");
- if (IS_ERR(pcie->afi_clk))
- return PTR_ERR(pcie->afi_clk);
-
- pcie->pll_e = devm_clk_get(dev, "pll_e");
- if (IS_ERR(pcie->pll_e))
- return PTR_ERR(pcie->pll_e);
-
- if (soc->has_cml_clk) {
- pcie->cml_clk = devm_clk_get(dev, "cml");
- if (IS_ERR(pcie->cml_clk))
- return PTR_ERR(pcie->cml_clk);
- }
+ pcie->num_clks = devm_clk_bulk_get_all(dev, &pcie->clks);
+ if (pcie->num_clks < 0)
+ return dev_err_probe(dev, pcie->num_clks,
+ "failed to get clocks\n");
return 0;
}
@@ -2344,7 +2303,6 @@ static const struct tegra_pcie_soc tegra20_pcie = {
.has_pex_clkreq_en = false,
.has_pex_bias_ctrl = false,
.has_intr_prsnt_sense = false,
- .has_cml_clk = false,
.has_gen2 = false,
.force_pca_enable = false,
.program_uphy = true,
@@ -2373,7 +2331,6 @@ static const struct tegra_pcie_soc tegra30_pcie = {
.has_pex_clkreq_en = true,
.has_pex_bias_ctrl = true,
.has_intr_prsnt_sense = true,
- .has_cml_clk = true,
.has_gen2 = false,
.force_pca_enable = false,
.program_uphy = true,
@@ -2394,7 +2351,6 @@ static const struct tegra_pcie_soc tegra124_pcie = {
.has_pex_clkreq_en = true,
.has_pex_bias_ctrl = true,
.has_intr_prsnt_sense = true,
- .has_cml_clk = true,
.has_gen2 = true,
.force_pca_enable = false,
.program_uphy = true,
@@ -2417,7 +2373,6 @@ static const struct tegra_pcie_soc tegra210_pcie = {
.has_pex_clkreq_en = true,
.has_pex_bias_ctrl = true,
.has_intr_prsnt_sense = true,
- .has_cml_clk = true,
.has_gen2 = true,
.force_pca_enable = true,
.program_uphy = true,
@@ -2458,7 +2413,6 @@ static const struct tegra_pcie_soc tegra186_pcie = {
.has_pex_clkreq_en = true,
.has_pex_bias_ctrl = true,
.has_intr_prsnt_sense = true,
- .has_cml_clk = false,
.has_gen2 = true,
.force_pca_enable = false,
.program_uphy = false,
@@ -2671,7 +2625,7 @@ static int tegra_pcie_pm_suspend(struct device *dev)
}
reset_control_assert(pcie->pex_rst);
- clk_disable_unprepare(pcie->pex_clk);
+ clk_bulk_disable_unprepare(pcie->num_clks, pcie->clks);
if (IS_ENABLED(CONFIG_PCI_MSI))
tegra_pcie_disable_msi(pcie);
@@ -2705,9 +2659,9 @@ static int tegra_pcie_pm_resume(struct device *dev)
if (IS_ENABLED(CONFIG_PCI_MSI))
tegra_pcie_enable_msi(pcie);
- err = clk_prepare_enable(pcie->pex_clk);
+ err = clk_bulk_prepare_enable(pcie->num_clks, pcie->clks);
if (err) {
- dev_err(dev, "failed to enable PEX clock: %d\n", err);
+ dev_err(dev, "failed to enable clock: %d\n", err);
goto pex_dpd_enable;
}
@@ -2728,7 +2682,6 @@ static int tegra_pcie_pm_resume(struct device *dev)
disable_pex_clk:
reset_control_assert(pcie->pex_rst);
- clk_disable_unprepare(pcie->pex_clk);
pex_dpd_enable:
pinctrl_pm_select_idle_state(dev);
poweroff:
--
2.50.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH v2 4/4] PCI: tegra: Use BIT() and GENMASK() macros for register definitions
2025-12-15 14:15 [PATCH v2 0/4] PCI: tegra: A couple of cleanups Anand Moon
` (2 preceding siblings ...)
2025-12-15 14:15 ` [PATCH v2 3/4] PCI: tegra: Use readl_poll_timeout() for link status polling Anand Moon
@ 2025-12-15 14:15 ` Anand Moon
3 siblings, 0 replies; 10+ messages in thread
From: Anand Moon @ 2025-12-15 14:15 UTC (permalink / raw)
To: Bjorn Helgaas, Lorenzo Pieralisi, Krzysztof Wilczyński,
Manivannan Sadhasivam, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Thierry Reding, Jonathan Hunter,
open list:PCI SUBSYSTEM,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list:TEGRA ARCHITECTURE SUPPORT, open list
Cc: Anand Moon, Mikko Perttunen
Replace manual bit operations with standard BIT() and GENMASK() macros.
This eliminates magic numbers, enhances readability, improves
maintainability, and resolves checkpatch.pl warnings.
Cc: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
v2: improve the commit message
v1: New patch
---
drivers/pci/controller/pci-tegra.c | 129 +++++++++++++++--------------
1 file changed, 65 insertions(+), 64 deletions(-)
diff --git a/drivers/pci/controller/pci-tegra.c b/drivers/pci/controller/pci-tegra.c
index 336d2cf4d828..99f6f93d6d99 100644
--- a/drivers/pci/controller/pci-tegra.c
+++ b/drivers/pci/controller/pci-tegra.c
@@ -13,6 +13,7 @@
* Author: Thierry Reding <treding@nvidia.com>
*/
+#include <linux/bitops.h>
#include <linux/clk.h>
#include <linux/cleanup.h>
#include <linux/debugfs.h>
@@ -85,17 +86,17 @@
#define AFI_MSI_EN_VEC(x) (0x8c + ((x) * 4))
#define AFI_CONFIGURATION 0xac
-#define AFI_CONFIGURATION_EN_FPCI (1 << 0)
-#define AFI_CONFIGURATION_CLKEN_OVERRIDE (1 << 31)
+#define AFI_CONFIGURATION_EN_FPCI BIT(0)
+#define AFI_CONFIGURATION_CLKEN_OVERRIDE BIT(31)
#define AFI_FPCI_ERROR_MASKS 0xb0
#define AFI_INTR_MASK 0xb4
-#define AFI_INTR_MASK_INT_MASK (1 << 0)
-#define AFI_INTR_MASK_MSI_MASK (1 << 8)
+#define AFI_INTR_MASK_INT_MASK BIT(0)
+#define AFI_INTR_MASK_MSI_MASK BIT(8)
#define AFI_INTR_CODE 0xb8
-#define AFI_INTR_CODE_MASK 0xf
+#define AFI_INTR_CODE_MASK GENMASK(3, 0)
#define AFI_INTR_INI_SLAVE_ERROR 1
#define AFI_INTR_INI_DECODE_ERROR 2
#define AFI_INTR_TARGET_ABORT 3
@@ -114,32 +115,32 @@
#define AFI_INTR_SIGNATURE 0xbc
#define AFI_UPPER_FPCI_ADDRESS 0xc0
#define AFI_SM_INTR_ENABLE 0xc4
-#define AFI_SM_INTR_INTA_ASSERT (1 << 0)
-#define AFI_SM_INTR_INTB_ASSERT (1 << 1)
-#define AFI_SM_INTR_INTC_ASSERT (1 << 2)
-#define AFI_SM_INTR_INTD_ASSERT (1 << 3)
-#define AFI_SM_INTR_INTA_DEASSERT (1 << 4)
-#define AFI_SM_INTR_INTB_DEASSERT (1 << 5)
-#define AFI_SM_INTR_INTC_DEASSERT (1 << 6)
-#define AFI_SM_INTR_INTD_DEASSERT (1 << 7)
+#define AFI_SM_INTR_INTA_ASSERT BIT(0)
+#define AFI_SM_INTR_INTB_ASSERT BIT(1)
+#define AFI_SM_INTR_INTC_ASSERT BIT(2)
+#define AFI_SM_INTR_INTD_ASSERT BIT(3)
+#define AFI_SM_INTR_INTA_DEASSERT BIT(4)
+#define AFI_SM_INTR_INTB_DEASSERT BIT(5)
+#define AFI_SM_INTR_INTC_DEASSERT BIT(6)
+#define AFI_SM_INTR_INTD_DEASSERT BIT(7)
#define AFI_AFI_INTR_ENABLE 0xc8
-#define AFI_INTR_EN_INI_SLVERR (1 << 0)
-#define AFI_INTR_EN_INI_DECERR (1 << 1)
-#define AFI_INTR_EN_TGT_SLVERR (1 << 2)
-#define AFI_INTR_EN_TGT_DECERR (1 << 3)
-#define AFI_INTR_EN_TGT_WRERR (1 << 4)
-#define AFI_INTR_EN_DFPCI_DECERR (1 << 5)
-#define AFI_INTR_EN_AXI_DECERR (1 << 6)
-#define AFI_INTR_EN_FPCI_TIMEOUT (1 << 7)
-#define AFI_INTR_EN_PRSNT_SENSE (1 << 8)
+#define AFI_INTR_EN_INI_SLVERR BIT(0)
+#define AFI_INTR_EN_INI_DECERR BIT(1)
+#define AFI_INTR_EN_TGT_SLVERR BIT(2)
+#define AFI_INTR_EN_TGT_DECERR BIT(3)
+#define AFI_INTR_EN_TGT_WRERR BIT(4)
+#define AFI_INTR_EN_DFPCI_DECERR BIT(5)
+#define AFI_INTR_EN_AXI_DECERR BIT(6)
+#define AFI_INTR_EN_FPCI_TIMEOUT BIT(7)
+#define AFI_INTR_EN_PRSNT_SENSE BIT(8)
#define AFI_PCIE_PME 0xf0
#define AFI_PCIE_CONFIG 0x0f8
-#define AFI_PCIE_CONFIG_PCIE_DISABLE(x) (1 << ((x) + 1))
-#define AFI_PCIE_CONFIG_PCIE_DISABLE_ALL 0xe
-#define AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_MASK (0xf << 20)
+#define AFI_PCIE_CONFIG_PCIE_DISABLE(x) BIT((x) + 1)
+#define AFI_PCIE_CONFIG_PCIE_DISABLE_ALL GENMASK(3, 1)
+#define AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_MASK GENMASK(23, 20)
#define AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_SINGLE (0x0 << 20)
#define AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_420 (0x0 << 20)
#define AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_X2_X1 (0x0 << 20)
@@ -150,79 +151,79 @@
#define AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_211 (0x1 << 20)
#define AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_411 (0x2 << 20)
#define AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_111 (0x2 << 20)
-#define AFI_PCIE_CONFIG_PCIE_CLKREQ_GPIO(x) (1 << ((x) + 29))
-#define AFI_PCIE_CONFIG_PCIE_CLKREQ_GPIO_ALL (0x7 << 29)
+#define AFI_PCIE_CONFIG_PCIE_CLKREQ_GPIO(x) BIT((x) + 29)
+#define AFI_PCIE_CONFIG_PCIE_CLKREQ_GPIO_ALL GENMASK(31, 29)
#define AFI_FUSE 0x104
-#define AFI_FUSE_PCIE_T0_GEN2_DIS (1 << 2)
+#define AFI_FUSE_PCIE_T0_GEN2_DIS BIT(2)
#define AFI_PEX0_CTRL 0x110
#define AFI_PEX1_CTRL 0x118
-#define AFI_PEX_CTRL_RST (1 << 0)
-#define AFI_PEX_CTRL_CLKREQ_EN (1 << 1)
-#define AFI_PEX_CTRL_REFCLK_EN (1 << 3)
-#define AFI_PEX_CTRL_OVERRIDE_EN (1 << 4)
+#define AFI_PEX_CTRL_RST BIT(0)
+#define AFI_PEX_CTRL_CLKREQ_EN BIT(1)
+#define AFI_PEX_CTRL_REFCLK_EN BIT(3)
+#define AFI_PEX_CTRL_OVERRIDE_EN BIT(4)
#define AFI_PLLE_CONTROL 0x160
-#define AFI_PLLE_CONTROL_BYPASS_PADS2PLLE_CONTROL (1 << 9)
-#define AFI_PLLE_CONTROL_PADS2PLLE_CONTROL_EN (1 << 1)
+#define AFI_PLLE_CONTROL_BYPASS_PADS2PLLE_CONTROL BIT(9)
+#define AFI_PLLE_CONTROL_PADS2PLLE_CONTROL_EN BIT(1)
#define AFI_PEXBIAS_CTRL_0 0x168
#define RP_ECTL_2_R1 0x00000e84
-#define RP_ECTL_2_R1_RX_CTLE_1C_MASK 0xffff
+#define RP_ECTL_2_R1_RX_CTLE_1C_MASK GENMASK(15, 0)
#define RP_ECTL_4_R1 0x00000e8c
-#define RP_ECTL_4_R1_RX_CDR_CTRL_1C_MASK (0xffff << 16)
+#define RP_ECTL_4_R1_RX_CDR_CTRL_1C_MASK GENMASK(31, 16)
#define RP_ECTL_4_R1_RX_CDR_CTRL_1C_SHIFT 16
#define RP_ECTL_5_R1 0x00000e90
-#define RP_ECTL_5_R1_RX_EQ_CTRL_L_1C_MASK 0xffffffff
+#define RP_ECTL_5_R1_RX_EQ_CTRL_L_1C_MASK GENMASK(31, 0)
#define RP_ECTL_6_R1 0x00000e94
-#define RP_ECTL_6_R1_RX_EQ_CTRL_H_1C_MASK 0xffffffff
+#define RP_ECTL_6_R1_RX_EQ_CTRL_H_1C_MASK GENMASK(31, 0)
#define RP_ECTL_2_R2 0x00000ea4
#define RP_ECTL_2_R2_RX_CTLE_1C_MASK 0xffff
#define RP_ECTL_4_R2 0x00000eac
-#define RP_ECTL_4_R2_RX_CDR_CTRL_1C_MASK (0xffff << 16)
+#define RP_ECTL_4_R2_RX_CDR_CTRL_1C_MASK GENMASK(31, 16)
#define RP_ECTL_4_R2_RX_CDR_CTRL_1C_SHIFT 16
#define RP_ECTL_5_R2 0x00000eb0
-#define RP_ECTL_5_R2_RX_EQ_CTRL_L_1C_MASK 0xffffffff
+#define RP_ECTL_5_R2_RX_EQ_CTRL_L_1C_MASK GENMASK(31, 0)
#define RP_ECTL_6_R2 0x00000eb4
-#define RP_ECTL_6_R2_RX_EQ_CTRL_H_1C_MASK 0xffffffff
+#define RP_ECTL_6_R2_RX_EQ_CTRL_H_1C_MASK GENMASK(31, 0)
#define RP_VEND_XP 0x00000f00
-#define RP_VEND_XP_DL_UP (1 << 30)
-#define RP_VEND_XP_OPPORTUNISTIC_ACK (1 << 27)
-#define RP_VEND_XP_OPPORTUNISTIC_UPDATEFC (1 << 28)
-#define RP_VEND_XP_UPDATE_FC_THRESHOLD_MASK (0xff << 18)
+#define RP_VEND_XP_DL_UP BIT(30)
+#define RP_VEND_XP_OPPORTUNISTIC_ACK BIT(27)
+#define RP_VEND_XP_OPPORTUNISTIC_UPDATEFC BIT(28)
+#define RP_VEND_XP_UPDATE_FC_THRESHOLD_MASK GENMASK(25, 18)
#define RP_VEND_CTL0 0x00000f44
-#define RP_VEND_CTL0_DSK_RST_PULSE_WIDTH_MASK (0xf << 12)
+#define RP_VEND_CTL0_DSK_RST_PULSE_WIDTH_MASK GENMASK(15, 12)
#define RP_VEND_CTL0_DSK_RST_PULSE_WIDTH (0x9 << 12)
#define RP_VEND_CTL1 0x00000f48
-#define RP_VEND_CTL1_ERPT (1 << 13)
+#define RP_VEND_CTL1_ERPT BIT(13)
#define RP_VEND_XP_BIST 0x00000f4c
-#define RP_VEND_XP_BIST_GOTO_L1_L2_AFTER_DLLP_DONE (1 << 28)
+#define RP_VEND_XP_BIST_GOTO_L1_L2_AFTER_DLLP_DONE BIT(28)
#define RP_VEND_CTL2 0x00000fa8
-#define RP_VEND_CTL2_PCA_ENABLE (1 << 7)
+#define RP_VEND_CTL2_PCA_ENABLE BIT(7)
#define RP_PRIV_MISC 0x00000fe0
-#define RP_PRIV_MISC_PRSNT_MAP_EP_PRSNT (0xe << 0)
-#define RP_PRIV_MISC_PRSNT_MAP_EP_ABSNT (0xf << 0)
-#define RP_PRIV_MISC_CTLR_CLK_CLAMP_THRESHOLD_MASK (0x7f << 16)
+#define RP_PRIV_MISC_PRSNT_MAP_EP_PRSNT GENMASK(3, 1)
+#define RP_PRIV_MISC_PRSNT_MAP_EP_ABSNT GENMASK(3, 0)
+#define RP_PRIV_MISC_CTLR_CLK_CLAMP_THRESHOLD_MASK GENMASK(22, 16)
#define RP_PRIV_MISC_CTLR_CLK_CLAMP_THRESHOLD (0xf << 16)
-#define RP_PRIV_MISC_CTLR_CLK_CLAMP_ENABLE (1 << 23)
-#define RP_PRIV_MISC_TMS_CLK_CLAMP_THRESHOLD_MASK (0x7f << 24)
+#define RP_PRIV_MISC_CTLR_CLK_CLAMP_ENABLE BIT(23)
+#define RP_PRIV_MISC_TMS_CLK_CLAMP_THRESHOLD_MASK GENMASK(30, 24)
#define RP_PRIV_MISC_TMS_CLK_CLAMP_THRESHOLD (0xf << 24)
-#define RP_PRIV_MISC_TMS_CLK_CLAMP_ENABLE (1 << 31)
+#define RP_PRIV_MISC_TMS_CLK_CLAMP_ENABLE BIT(31)
#define RP_LINK_CONTROL_STATUS 0x00000090
#define RP_LINK_CONTROL_STATUS_DL_LINK_ACTIVE 0x20000000
@@ -233,22 +234,22 @@
#define PADS_CTL_SEL 0x0000009c
#define PADS_CTL 0x000000a0
-#define PADS_CTL_IDDQ_1L (1 << 0)
-#define PADS_CTL_TX_DATA_EN_1L (1 << 6)
-#define PADS_CTL_RX_DATA_EN_1L (1 << 10)
+#define PADS_CTL_IDDQ_1L BIT(0)
+#define PADS_CTL_TX_DATA_EN_1L BIT(6)
+#define PADS_CTL_RX_DATA_EN_1L BIT(10)
#define PADS_PLL_CTL_TEGRA20 0x000000b8
#define PADS_PLL_CTL_TEGRA30 0x000000b4
-#define PADS_PLL_CTL_RST_B4SM (1 << 1)
-#define PADS_PLL_CTL_LOCKDET (1 << 8)
-#define PADS_PLL_CTL_REFCLK_MASK (0x3 << 16)
+#define PADS_PLL_CTL_RST_B4SM BIT(1)
+#define PADS_PLL_CTL_LOCKDET BIT(8)
+#define PADS_PLL_CTL_REFCLK_MASK GENMASK(17, 16)
#define PADS_PLL_CTL_REFCLK_INTERNAL_CML (0 << 16)
-#define PADS_PLL_CTL_REFCLK_INTERNAL_CMOS (1 << 16)
+#define PADS_PLL_CTL_REFCLK_INTERNAL_CMOS BIT(16)
#define PADS_PLL_CTL_REFCLK_EXTERNAL (2 << 16)
#define PADS_PLL_CTL_TXCLKREF_MASK (0x1 << 20)
#define PADS_PLL_CTL_TXCLKREF_DIV10 (0 << 20)
-#define PADS_PLL_CTL_TXCLKREF_DIV5 (1 << 20)
-#define PADS_PLL_CTL_TXCLKREF_BUF_EN (1 << 22)
+#define PADS_PLL_CTL_TXCLKREF_DIV5 BIT(20)
+#define PADS_PLL_CTL_TXCLKREF_BUF_EN BIT(22)
#define PADS_REFCLK_CFG0 0x000000c8
#define PADS_REFCLK_CFG1 0x000000cc
--
2.50.1
^ permalink raw reply related [flat|nested] 10+ messages in thread