Re: [PATCH 2/4] dt-bindings: mfd: spacemit,p1: Add individual regulator supply properties

From: Rob Herring <robh@kernel.org>
To: Guodong Xu <guodong@riscstar.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>, Yixun Lan <dlan@gentoo.org>,
	Alex Elder <elder@riscstar.com>, Lee Jones <lee@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Troy Mitchell <troy.mitchell@linux.spacemit.com>,
	Paul Walmsley <pjw@kernel.org>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Albert Ou <aou@eecs.berkeley.edu>,
	Alexandre Ghiti <alex@ghiti.fr>,
	linux-kernel@vger.kernel.org, linux-riscv@lists.infradead.org,
	spacemit@lists.linux.dev, devicetree@vger.kernel.org
Subject: Re: [PATCH 2/4] dt-bindings: mfd: spacemit,p1: Add individual regulator supply properties
Date: Thu, 22 Jan 2026 10:11:00 -0600	[thread overview]
Message-ID: <20260122161100.GA2223008-robh@kernel.org> (raw)
In-Reply-To: <20260122-spacemit-p1-v1-2-309be27fbff9@riscstar.com>

On Thu, Jan 22, 2026 at 05:43:43PM +0800, Guodong Xu wrote:
> Add supply properties that match the P1 PMIC's actual hardware topology
> where each buck converter has its own VIN pin and LDO groups share
> common input pins. Supply names are defined according to the pinout
> names in the P1 datasheet.
> 
> This allows different boards to describe their actual
> power tree connections in devicetree rather than hardcoding supply
> relationships in the driver.
> 
> Signed-off-by: Guodong Xu <guodong@riscstar.com>
> ---
>  .../devicetree/bindings/mfd/spacemit,p1.yaml       | 58 +++++++++++++++++++++-
>  1 file changed, 56 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/mfd/spacemit,p1.yaml b/Documentation/devicetree/bindings/mfd/spacemit,p1.yaml
> index c6593ac6ef6adb72fc48af570dc13fc9edf77ccb..abdc93b9a67b1872c8fe6955abd950622a0b69e8 100644
> --- a/Documentation/devicetree/bindings/mfd/spacemit,p1.yaml
> +++ b/Documentation/devicetree/bindings/mfd/spacemit,p1.yaml
> @@ -27,8 +27,41 @@ properties:
>    interrupts:
>      maxItems: 1
>  
> -  vin-supply:
> -    description: Input supply phandle.
> +  vin1-supply:
> +    description:
> +      Power supply for BUCK1. Required if BUCK1 is defined.
> +
> +  vin2-supply:
> +    description:
> +      Power supply for BUCK2. Required if BUCK2 is defined.
> +
> +  vin3-supply:
> +    description:
> +      Power supply for BUCK3. Required if BUCK3 is defined.
> +
> +  vin4-supply:
> +    description:
> +      Power supply for BUCK4. Required if BUCK4 is defined.
> +
> +  vin5-supply:
> +    description:
> +      Power supply for BUCK5. Required if BUCK5 is defined.
> +
> +  vin6-supply:
> +    description:
> +      Power supply for BUCK6. Required if BUCK6 is defined.
> +
> +  aldoin-supply:
> +    description:
> +      Power supply for ALDO1-4. Required if any are defined.
> +
> +  dldoin1-supply:
> +    description:
> +      Power supply for DLDO1-4. Required if any are defined.
> +
> +  dldoin2-supply:
> +    description:
> +      Power supply for DLDO5-7. Required if any are defined.
>  
>    regulators:
>      type: object
> @@ -50,6 +83,15 @@ unevaluatedProperties: false
>  
>  examples:
>    - |
> +    / {
> +        reg_vcc_5v: regulator-vcc-5v {
> +            compatible = "regulator-fixed";
> +            regulator-name = "vcc_5v";
> +            regulator-min-microvolt = <5000000>;
> +            regulator-max-microvolt = <5000000>;
> +        };
> +    };

Don't put providers into the examples of consumers.

Rob

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv