All of lore.kernel.org
 help / color / mirror / Atom feed
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Isaac Scott <isaac.scott@ideasonboard.com>
Cc: linux-media@vger.kernel.org, dafna@fastmail.com,
	mchehab@kernel.org, heiko@sntech.de,
	linux-rockchip@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v1 2/6] media: rkisp1-isp: Add in_bypass flag for YUV bypass
Date: Wed, 4 Feb 2026 19:04:54 +0200	[thread overview]
Message-ID: <20260204170454.GD170964@killaraus> (raw)
In-Reply-To: <20260204112506.3706049-3-isaac.scott@ideasonboard.com>

Hi Isaac,

Thank you for the patch.

On Wed, Feb 04, 2026 at 11:25:02AM +0000, Isaac Scott wrote:
> The rkisp1 features a 'bypass' mode for RAW and YUV formats. This
> disables all ISP blocks, and makes the rkisp1 display input data from
> the mipi csi receiver at the output, unmodified.
> 
> To determine whether we can activate bypass, we can detect whether both
> the source and sink formats are YUV. If they are, we can set a new
> in_bypass flag.
> 
> For YUV bypass, we should configure the ISP input to interpret incoming
> H/VSYNC signals as data enable / disable. Add this.
> 
> Signed-off-by: Isaac Scott <isaac.scott@ideasonboard.com>
> ---
>  drivers/media/platform/rockchip/rkisp1/rkisp1-common.h | 1 +
>  drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c    | 7 ++++++-
>  2 files changed, 7 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/media/platform/rockchip/rkisp1/rkisp1-common.h b/drivers/media/platform/rockchip/rkisp1/rkisp1-common.h
> index 5e6a4d5f6fd1..d90233e31ad3 100644
> --- a/drivers/media/platform/rockchip/rkisp1/rkisp1-common.h
> +++ b/drivers/media/platform/rockchip/rkisp1/rkisp1-common.h
> @@ -532,6 +532,7 @@ struct rkisp1_device {
>  	struct rkisp1_debug debug;
>  	const struct rkisp1_info *info;
>  	int irqs[RKISP1_NUM_IRQS];
> +	bool in_bypass;
>  	bool irqs_enabled;
>  };
>  
> diff --git a/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c b/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c
> index 2311672cedb1..f636d738b7e8 100644
> --- a/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c
> +++ b/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c
> @@ -212,6 +212,8 @@ static int rkisp1_config_isp(struct rkisp1_isp *isp,
>  	const struct v4l2_mbus_framefmt *sink_frm;
>  	const struct v4l2_rect *sink_crop;
>  
> +	rkisp1->in_bypass = false;
> +
>  	sink_frm = v4l2_subdev_state_get_format(sd_state,
>  						RKISP1_ISP_PAD_SINK_VIDEO);
>  	sink_crop = v4l2_subdev_state_get_crop(sd_state,
> @@ -240,7 +242,10 @@ static int rkisp1_config_isp(struct rkisp1_isp *isp,
>  		}
>  	} else if (sink_fmt->pixel_enc == V4L2_PIXEL_ENC_YUV) {
>  		acq_mult = 2;
> -		if (mbus_type == V4L2_MBUS_CSI2_DPHY) {
> +		if (src_fmt->pixel_enc == V4L2_PIXEL_ENC_YUV) {
> +			isp_ctrl = RKISP1_CIF_ISP_CTRL_ISP_MODE_DATA_MODE;
> +			rkisp1->in_bypass = true;

Based on the review of patches 3/6 and 5/6 I think this flag will
become unused, so you can probably drop this patch too.

> +		} else if (mbus_type == V4L2_MBUS_CSI2_DPHY) {
>  			isp_ctrl = RKISP1_CIF_ISP_CTRL_ISP_MODE_ITU601;
>  		} else {
>  			if (mbus_type == V4L2_MBUS_BT656)

-- 
Regards,

Laurent Pinchart


WARNING: multiple messages have this Message-ID (diff)
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Isaac Scott <isaac.scott@ideasonboard.com>
Cc: linux-media@vger.kernel.org, dafna@fastmail.com,
	mchehab@kernel.org, heiko@sntech.de,
	linux-rockchip@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v1 2/6] media: rkisp1-isp: Add in_bypass flag for YUV bypass
Date: Wed, 4 Feb 2026 19:04:54 +0200	[thread overview]
Message-ID: <20260204170454.GD170964@killaraus> (raw)
In-Reply-To: <20260204112506.3706049-3-isaac.scott@ideasonboard.com>

Hi Isaac,

Thank you for the patch.

On Wed, Feb 04, 2026 at 11:25:02AM +0000, Isaac Scott wrote:
> The rkisp1 features a 'bypass' mode for RAW and YUV formats. This
> disables all ISP blocks, and makes the rkisp1 display input data from
> the mipi csi receiver at the output, unmodified.
> 
> To determine whether we can activate bypass, we can detect whether both
> the source and sink formats are YUV. If they are, we can set a new
> in_bypass flag.
> 
> For YUV bypass, we should configure the ISP input to interpret incoming
> H/VSYNC signals as data enable / disable. Add this.
> 
> Signed-off-by: Isaac Scott <isaac.scott@ideasonboard.com>
> ---
>  drivers/media/platform/rockchip/rkisp1/rkisp1-common.h | 1 +
>  drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c    | 7 ++++++-
>  2 files changed, 7 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/media/platform/rockchip/rkisp1/rkisp1-common.h b/drivers/media/platform/rockchip/rkisp1/rkisp1-common.h
> index 5e6a4d5f6fd1..d90233e31ad3 100644
> --- a/drivers/media/platform/rockchip/rkisp1/rkisp1-common.h
> +++ b/drivers/media/platform/rockchip/rkisp1/rkisp1-common.h
> @@ -532,6 +532,7 @@ struct rkisp1_device {
>  	struct rkisp1_debug debug;
>  	const struct rkisp1_info *info;
>  	int irqs[RKISP1_NUM_IRQS];
> +	bool in_bypass;
>  	bool irqs_enabled;
>  };
>  
> diff --git a/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c b/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c
> index 2311672cedb1..f636d738b7e8 100644
> --- a/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c
> +++ b/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c
> @@ -212,6 +212,8 @@ static int rkisp1_config_isp(struct rkisp1_isp *isp,
>  	const struct v4l2_mbus_framefmt *sink_frm;
>  	const struct v4l2_rect *sink_crop;
>  
> +	rkisp1->in_bypass = false;
> +
>  	sink_frm = v4l2_subdev_state_get_format(sd_state,
>  						RKISP1_ISP_PAD_SINK_VIDEO);
>  	sink_crop = v4l2_subdev_state_get_crop(sd_state,
> @@ -240,7 +242,10 @@ static int rkisp1_config_isp(struct rkisp1_isp *isp,
>  		}
>  	} else if (sink_fmt->pixel_enc == V4L2_PIXEL_ENC_YUV) {
>  		acq_mult = 2;
> -		if (mbus_type == V4L2_MBUS_CSI2_DPHY) {
> +		if (src_fmt->pixel_enc == V4L2_PIXEL_ENC_YUV) {
> +			isp_ctrl = RKISP1_CIF_ISP_CTRL_ISP_MODE_DATA_MODE;
> +			rkisp1->in_bypass = true;

Based on the review of patches 3/6 and 5/6 I think this flag will
become unused, so you can probably drop this patch too.

> +		} else if (mbus_type == V4L2_MBUS_CSI2_DPHY) {
>  			isp_ctrl = RKISP1_CIF_ISP_CTRL_ISP_MODE_ITU601;
>  		} else {
>  			if (mbus_type == V4L2_MBUS_BT656)

-- 
Regards,

Laurent Pinchart

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

  reply	other threads:[~2026-02-04 17:05 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-02-04 11:25 [PATCH v1 0/6] media: rkisp1: Add YUV bypass support for rkisp1 Isaac Scott
2026-02-04 11:25 ` Isaac Scott
2026-02-04 11:25 ` [PATCH v1 1/6] media: rkisp1-resizer: Add YUV source formats to resizer Isaac Scott
2026-02-04 11:25   ` Isaac Scott
2026-02-04 16:43   ` Laurent Pinchart
2026-02-04 16:43     ` Laurent Pinchart
2026-02-04 11:25 ` [PATCH v1 2/6] media: rkisp1-isp: Add in_bypass flag for YUV bypass Isaac Scott
2026-02-04 11:25   ` Isaac Scott
2026-02-04 17:04   ` Laurent Pinchart [this message]
2026-02-04 17:04     ` Laurent Pinchart
2026-02-04 11:25 ` [PATCH v1 3/6] media: rkisp1-isp: Add target_format Isaac Scott
2026-02-04 11:25   ` Isaac Scott
2026-02-04 11:37   ` Laurent Pinchart
2026-02-04 11:37     ` Laurent Pinchart
2026-02-04 13:28     ` Isaac Scott
2026-02-04 13:28       ` Isaac Scott
2026-02-04 11:25 ` [PATCH v1 4/6] media: rkisp1-isp: Propagate sink -> source format in YUV passthough Isaac Scott
2026-02-04 11:25   ` Isaac Scott
2026-02-04 15:28   ` Laurent Pinchart
2026-02-04 15:28     ` Laurent Pinchart
2026-02-04 11:25 ` [PATCH v1 5/6] media: rkisp1: Give buffers back instead of dropping in bypass mode Isaac Scott
2026-02-04 11:25   ` Isaac Scott
2026-02-04 15:40   ` Laurent Pinchart
2026-02-04 15:40     ` Laurent Pinchart
2026-02-04 16:36     ` Isaac Scott
2026-02-04 16:36       ` Isaac Scott
2026-02-04 11:25 ` [PATCH v1 6/6] media: rkisp1: Treat 8 bus width and 16 bus width formats the same Isaac Scott
2026-02-04 11:25   ` Isaac Scott

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260204170454.GD170964@killaraus \
    --to=laurent.pinchart@ideasonboard.com \
    --cc=dafna@fastmail.com \
    --cc=heiko@sntech.de \
    --cc=isaac.scott@ideasonboard.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=mchehab@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.