[PATCH v4 15/20] hw/i3c/dw-i3c: Add controller resets

[Jamin Lin <jamin_lin@aspeedtech.com>]

Adds behavior to the device reset register.

Signed-off-by: Joe Komlodi <komlodi@google.com>
Reviewed-by: Patrick Venture <venture@google.com>
Reviewed-by: Stephen Longfield <slongfield@google.com>
Reviewed-by: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
---
 hw/i3c/dw-i3c.c     | 117 ++++++++++++++++++++++++++++++++++++++++++++
 hw/i3c/trace-events |   1 +
 2 files changed, 118 insertions(+)

diff --git a/hw/i3c/dw-i3c.c b/hw/i3c/dw-i3c.c
index 7a1f79e10d..87ad344e5d 100644
--- a/hw/i3c/dw-i3c.c
+++ b/hw/i3c/dw-i3c.c
@@ -860,6 +860,122 @@ static void dw_i3c_intr_force_w(DWI3C *s, uint32_t val)
     dw_i3c_update_irq(s);
 }
 
+static void dw_i3c_cmd_queue_reset(DWI3C *s)
+{
+    fifo32_reset(&s->cmd_queue);
+
+    ARRAY_FIELD_DP32(s->regs, QUEUE_STATUS_LEVEL, CMD_QUEUE_EMPTY_LOC,
+                     fifo32_num_free(&s->cmd_queue));
+    uint8_t empty_threshold = ARRAY_FIELD_EX32(s->regs, QUEUE_THLD_CTRL,
+                                               CMD_BUF_EMPTY_THLD);
+    if (fifo32_num_free(&s->cmd_queue) >= empty_threshold) {
+        ARRAY_FIELD_DP32(s->regs, INTR_STATUS, CMD_QUEUE_RDY, 1);
+        dw_i3c_update_irq(s);
+    };
+}
+
+static void dw_i3c_resp_queue_reset(DWI3C *s)
+{
+    fifo32_reset(&s->resp_queue);
+
+    ARRAY_FIELD_DP32(s->regs, QUEUE_STATUS_LEVEL, RESP_BUF_BLR,
+                     fifo32_num_used(&s->resp_queue));
+    /*
+     * This interrupt will always be cleared because the threshold is a minimum
+     * of 1 and the queue size is 0.
+     */
+    ARRAY_FIELD_DP32(s->regs, INTR_STATUS, RESP_RDY, 0);
+    dw_i3c_update_irq(s);
+}
+
+static void dw_i3c_ibi_queue_reset(DWI3C *s)
+{
+    fifo32_reset(&s->ibi_queue);
+
+    ARRAY_FIELD_DP32(s->regs, QUEUE_STATUS_LEVEL, IBI_BUF_BLR,
+                     fifo32_num_used(&s->resp_queue));
+    /*
+     * This interrupt will always be cleared because the threshold is a minimum
+     * of 1 and the queue size is 0.
+     */
+    ARRAY_FIELD_DP32(s->regs, INTR_STATUS, IBI_THLD, 0);
+    dw_i3c_update_irq(s);
+}
+
+static void dw_i3c_tx_queue_reset(DWI3C *s)
+{
+    fifo32_reset(&s->tx_queue);
+
+    ARRAY_FIELD_DP32(s->regs, DATA_BUFFER_STATUS_LEVEL, TX_BUF_EMPTY_LOC,
+                     fifo32_num_free(&s->tx_queue));
+    /* TX buf is empty, so this interrupt will always be set. */
+    ARRAY_FIELD_DP32(s->regs, INTR_STATUS, TX_THLD, 1);
+    dw_i3c_update_irq(s);
+}
+
+static void dw_i3c_rx_queue_reset(DWI3C *s)
+{
+    fifo32_reset(&s->rx_queue);
+
+    ARRAY_FIELD_DP32(s->regs, DATA_BUFFER_STATUS_LEVEL, RX_BUF_BLR,
+                     fifo32_num_used(&s->resp_queue));
+    /*
+     * This interrupt will always be cleared because the threshold is a minimum
+     * of 1 and the queue size is 0.
+     */
+    ARRAY_FIELD_DP32(s->regs, INTR_STATUS, RX_THLD, 0);
+    dw_i3c_update_irq(s);
+}
+
+static void dw_i3c_reset(DeviceState *dev)
+{
+    DWI3C *s = DW_I3C(dev);
+    trace_dw_i3c_reset(s->cfg.id);
+
+    memcpy(s->regs, dw_i3c_resets, sizeof(s->regs));
+    /*
+     * The user config for these may differ from our resets array, set them
+     * manually.
+     */
+    ARRAY_FIELD_DP32(s->regs, DEVICE_ADDR_TABLE_POINTER, ADDR,
+                     s->cfg.dev_addr_table_pointer);
+    ARRAY_FIELD_DP32(s->regs, DEVICE_ADDR_TABLE_POINTER, DEPTH,
+                     s->cfg.dev_addr_table_depth);
+    ARRAY_FIELD_DP32(s->regs, DEV_CHAR_TABLE_POINTER,
+                     P_DEV_CHAR_TABLE_START_ADDR,
+                     s->cfg.dev_char_table_pointer);
+    ARRAY_FIELD_DP32(s->regs, DEV_CHAR_TABLE_POINTER, DEV_CHAR_TABLE_DEPTH,
+                     s->cfg.dev_char_table_depth);
+
+    dw_i3c_cmd_queue_reset(s);
+    dw_i3c_resp_queue_reset(s);
+    dw_i3c_ibi_queue_reset(s);
+    dw_i3c_tx_queue_reset(s);
+    dw_i3c_rx_queue_reset(s);
+}
+
+static void dw_i3c_reset_ctrl_w(DWI3C *s, uint32_t val)
+{
+    if (FIELD_EX32(val, RESET_CTRL, CORE_RESET)) {
+        dw_i3c_reset(DEVICE(s));
+    }
+    if (FIELD_EX32(val, RESET_CTRL, CMD_QUEUE_RESET)) {
+        dw_i3c_cmd_queue_reset(s);
+    }
+    if (FIELD_EX32(val, RESET_CTRL, RESP_QUEUE_RESET)) {
+        dw_i3c_resp_queue_reset(s);
+    }
+    if (FIELD_EX32(val, RESET_CTRL, TX_BUF_RESET)) {
+        dw_i3c_tx_queue_reset(s);
+    }
+    if (FIELD_EX32(val, RESET_CTRL, RX_BUF_RESET)) {
+        dw_i3c_rx_queue_reset(s);
+    }
+    if (FIELD_EX32(val, RESET_CTRL, IBI_QUEUE_RESET)) {
+        dw_i3c_ibi_queue_reset(s);
+    }
+}
+
 static uint32_t dw_i3c_pop_rx(DWI3C *s)
 {
     if (fifo32_is_empty(&s->rx_queue)) {
@@ -1617,6 +1733,7 @@ static void dw_i3c_write(void *opaque, hwaddr offset, uint64_t value,
         dw_i3c_cmd_queue_port_w(s, val32);
         break;
     case R_RESET_CTRL:
+        dw_i3c_reset_ctrl_w(s, val32);
         break;
     case R_INTR_STATUS:
         dw_i3c_intr_status_w(s, val32);
diff --git a/hw/i3c/trace-events b/hw/i3c/trace-events
index a262fcce39..39f33d9a50 100644
--- a/hw/i3c/trace-events
+++ b/hw/i3c/trace-events
@@ -11,6 +11,7 @@ dw_i3c_send(uint32_t deviceid, uint32_t num_bytes) "I3C Dev[%u] send %" PRId32 "
 dw_i3c_recv_data(uint32_t deviceid, uint32_t num_bytes) "I3C Dev[%u] recv %" PRId32 " bytes from bus"
 dw_i3c_ibi_recv(uint32_t deviceid, uint8_t ibi_byte) "I3C Dev[%u] recv IBI byte 0x%" PRIx8
 dw_i3c_ibi_handle(uint32_t deviceid, uint8_t addr, bool rnw) "I3C Dev[%u] handle IBI from address 0x%" PRIx8 " RnW=%d"
+dw_i3c_reset(uint32_t deviceid) "I3C Dev[%u] reset"
 dw_i3c_pop_rx(uint32_t deviceid, uint32_t data) "I3C Dev[%u] pop 0x%" PRIx32 " from RX FIFO"
 dw_i3c_resp_queue_push(uint32_t deviceid, uint32_t data) "I3C Dev[%u] push 0x%" PRIx32 " to response queue"
 dw_i3c_push_tx(uint32_t deviceid, uint32_t data) "I3C Dev[%u] push 0x%" PRIx32 " to TX FIFO"
-- 
2.43.0