All of lore.kernel.org
 help / color / mirror / Atom feed
From: Raymond Mao <raymondmaoca@gmail.com>
To: u-boot@lists.denx.de
Cc: uboot@riscstar.com, u-boot-spacemit@groups.io,
	raymond.mao@riscstar.com, rick@andestech.com,
	ycliang@andestech.com, trini@konsulko.com, lukma@denx.de,
	hs@nabladev.com, jh80.chung@samsung.com, peng.fan@nxp.com,
	xypron.glpk@gmx.de, randolph@andestech.com, dlan@gentoo.org,
	junhui.liu@pigmoral.tech, neil.armstrong@linaro.org,
	quentin.schulz@cherry.de, samuel@sholland.org,
	raymondmaoca@gmail.com
Subject: [PATCH v2 01/16] spacemit: k1: support multi-board infrastructure
Date: Tue, 10 Feb 2026 10:14:44 -0500	[thread overview]
Message-ID: <20260210151459.2348758-2-raymondmaoca@gmail.com> (raw)
In-Reply-To: <20260210151459.2348758-1-raymondmaoca@gmail.com>

From: Raymond Mao <raymond.mao@riscstar.com>

Restructure K1 SoC support to handle multiple boards through a single
configuration:

1. Rename bananapi-f3_defconfig to k1_defconfig.
2. Move all K1 board files to k1 directory.

Eliminates the need for board-specific defconfigs while maintaining
hardware compatibility.

Signed-off-by: Raymond Mao <raymond.mao@riscstar.com>
---
 arch/riscv/Kconfig                                    | 10 ++++++----
 arch/riscv/cpu/k1/Kconfig                             |  4 ++++
 board/spacemit/{bananapi-f3 => k1}/Kconfig            | 11 ++++++++---
 board/spacemit/{bananapi-f3 => k1}/MAINTAINERS        |  4 ++--
 board/spacemit/{bananapi-f3 => k1}/Makefile           |  0
 board/spacemit/{bananapi-f3 => k1}/board.c            |  0
 .../{bananapi-f3_defconfig => spacemit_k1_defconfig}  |  3 ++-
 doc/board/spacemit/bananapi-f3.rst                    |  2 +-
 include/configs/{bananapi-f3.h => k1.h}               |  0
 9 files changed, 23 insertions(+), 11 deletions(-)
 rename board/spacemit/{bananapi-f3 => k1}/Kconfig (63%)
 rename board/spacemit/{bananapi-f3 => k1}/MAINTAINERS (61%)
 rename board/spacemit/{bananapi-f3 => k1}/Makefile (100%)
 rename board/spacemit/{bananapi-f3 => k1}/board.c (100%)
 rename configs/{bananapi-f3_defconfig => spacemit_k1_defconfig} (97%)
 rename include/configs/{bananapi-f3.h => k1.h} (100%)

diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index 79867656b15..ac50c1d7234 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -8,15 +8,17 @@ choice
 	prompt "Target select"
 	optional
 
+config ARCH_K1
+	bool "Spacemit K1 Architecture"
+	help
+	  This enables support for Spacemit K1 SoC family.
+
 config TARGET_ANDES_AE350
 	bool "Support Andes ae350"
 
 config TARGET_ANDES_VOYAGER
 	bool "Support Andes Voyager Board"
 
-config TARGET_BANANAPI_F3
-	bool "Support BananaPi F3 Board"
-
 config TARGET_K230_CANMV
 	bool "Support K230 CanMV Board"
 
@@ -115,7 +117,7 @@ source "board/sifive/unmatched/Kconfig"
 source "board/sipeed/maix/Kconfig"
 source "board/sophgo/milkv_duo/Kconfig"
 source "board/sophgo/licheerv_nano/Kconfig"
-source "board/spacemit/bananapi-f3/Kconfig"
+source "board/spacemit/k1/Kconfig"
 source "board/starfive/visionfive2/Kconfig"
 source "board/thead/th1520_lpi4a/Kconfig"
 source "board/xilinx/mbv/Kconfig"
diff --git a/arch/riscv/cpu/k1/Kconfig b/arch/riscv/cpu/k1/Kconfig
index 14201df80f2..4b621158334 100644
--- a/arch/riscv/cpu/k1/Kconfig
+++ b/arch/riscv/cpu/k1/Kconfig
@@ -2,6 +2,8 @@
 #
 # Copyright (C) 2024, Kongyang Liu <seashell11234455@gmail.com>
 
+if ARCH_K1
+
 config SPACEMIT_K1
 	bool
 	select BINMAN
@@ -17,3 +19,5 @@ config SPACEMIT_K1
 	imply SPL_CPU
 	imply SPL_OPENSBI
 	imply SPL_LOAD_FIT
+
+endif
diff --git a/board/spacemit/bananapi-f3/Kconfig b/board/spacemit/k1/Kconfig
similarity index 63%
rename from board/spacemit/bananapi-f3/Kconfig
rename to board/spacemit/k1/Kconfig
index f89fa9af2c7..9f9c806d00d 100644
--- a/board/spacemit/bananapi-f3/Kconfig
+++ b/board/spacemit/k1/Kconfig
@@ -1,7 +1,7 @@
-if TARGET_BANANAPI_F3
+if ARCH_K1
 
 config SYS_BOARD
-	default "bananapi-f3"
+	default "k1"
 
 config SYS_VENDOR
 	default "spacemit"
@@ -10,7 +10,7 @@ config SYS_CPU
 	default "k1"
 
 config SYS_CONFIG_NAME
-	default "bananapi-f3"
+	default "k1"
 
 config TEXT_BASE
 	default 0x00200000
@@ -22,4 +22,9 @@ config BOARD_SPECIFIC_OPTIONS
 	def_bool y
 	select SPACEMIT_K1
 
+config TARGET_BANANAPI_F3
+	bool "Support BananaPi F3 Board"
+	help
+	  BananaPi F3 board contains Spacemit K1 SoC.
+
 endif
diff --git a/board/spacemit/bananapi-f3/MAINTAINERS b/board/spacemit/k1/MAINTAINERS
similarity index 61%
rename from board/spacemit/bananapi-f3/MAINTAINERS
rename to board/spacemit/k1/MAINTAINERS
index 131bad03181..bd476c32719 100644
--- a/board/spacemit/bananapi-f3/MAINTAINERS
+++ b/board/spacemit/k1/MAINTAINERS
@@ -1,6 +1,6 @@
 BananaPi F3
 M:	Huan Zhou <pericycle.cc@@gmail.com>
 S:	Maintained
-F:	board/spacemit/bananapi-f3/
-F:	configs/bananapi-f3_defconfig
+F:	board/spacemit/k1/
+F:	configs/k1_defconfig
 F:	doc/board/spacemit/bananapi-f3.rst
diff --git a/board/spacemit/bananapi-f3/Makefile b/board/spacemit/k1/Makefile
similarity index 100%
rename from board/spacemit/bananapi-f3/Makefile
rename to board/spacemit/k1/Makefile
diff --git a/board/spacemit/bananapi-f3/board.c b/board/spacemit/k1/board.c
similarity index 100%
rename from board/spacemit/bananapi-f3/board.c
rename to board/spacemit/k1/board.c
diff --git a/configs/bananapi-f3_defconfig b/configs/spacemit_k1_defconfig
similarity index 97%
rename from configs/bananapi-f3_defconfig
rename to configs/spacemit_k1_defconfig
index a726ce84775..0bdc3c800f0 100644
--- a/configs/bananapi-f3_defconfig
+++ b/configs/spacemit_k1_defconfig
@@ -6,9 +6,10 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000000
 CONFIG_DEFAULT_DEVICE_TREE="k1-bananapi-f3"
 CONFIG_SYS_BOOTM_LEN=0xa000000
 CONFIG_SYS_LOAD_ADDR=0x200000
-CONFIG_TARGET_BANANAPI_F3=y
 CONFIG_ARCH_RV64I=y
 CONFIG_RISCV_SMODE=y
+CONFIG_ARCH_K1=y
+CONFIG_TARGET_BANANAPI_F3=y
 CONFIG_FIT=y
 CONFIG_SUPPORT_RAW_INITRD=y
 CONFIG_OF_BOARD_SETUP=y
diff --git a/doc/board/spacemit/bananapi-f3.rst b/doc/board/spacemit/bananapi-f3.rst
index f2220950a3a..1ece2ce9d02 100644
--- a/doc/board/spacemit/bananapi-f3.rst
+++ b/doc/board/spacemit/bananapi-f3.rst
@@ -29,7 +29,7 @@ built for SpacemiT K1 SoC as below:
 .. code-block:: console
 
    cd <U-Boot-dir>
-   make bananapi-f3_defconfig
+   make spacemit_k1_defconfig
    make OPENSBI=<OpenSBI-dir>/build/platform/generic/firmware/fw_dynamic.bin
 
 This will generate u-boot.itb
diff --git a/include/configs/bananapi-f3.h b/include/configs/k1.h
similarity index 100%
rename from include/configs/bananapi-f3.h
rename to include/configs/k1.h
-- 
2.25.1


  reply	other threads:[~2026-02-10 15:15 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-02-10 15:14 [PATCH v2 00/16] Add board support for Spacemit K1 SoC in SPL Raymond Mao
2026-02-10 15:14 ` Raymond Mao [this message]
2026-03-19  6:44   ` [PATCH v2 01/16] spacemit: k1: support multi-board infrastructure Leo Liang
2026-02-10 15:14 ` [PATCH v2 02/16] spacemit: k1: enable SPL with debug UART Raymond Mao
2026-02-10 15:14 ` [PATCH v2 03/16] configs: k1: enable early timer support Raymond Mao
2026-02-10 15:14 ` [PATCH v2 04/16] reset: k1: add SPL support and enable TWSI8 reset Raymond Mao
2026-02-10 15:14 ` [PATCH v2 05/16] dt-bindings: clock: import k1-syscon from upstream Raymond Mao
2026-02-10 15:14 ` [PATCH v2 06/16] dts: k1: import dts file from upstream folder Raymond Mao
2026-02-10 15:14 ` [PATCH v2 07/16] clk: spacemit: Add support for K1 SoC Raymond Mao
2026-02-10 15:14 ` [PATCH v2 08/16] dts: k1: enable clocks in SPL Raymond Mao
2026-02-10 15:14 ` [PATCH v2 09/16] board: k1: initialize clock and serial devices " Raymond Mao
2026-02-10 15:14 ` [PATCH v2 10/16] configs: k1: add default option for clock driver " Raymond Mao
2026-02-10 15:14 ` [PATCH v2 11/16] i2c: k1: add I2C driver support Raymond Mao
2026-02-11  4:57   ` Heiko Schocher
2026-02-10 15:14 ` [PATCH v2 12/16] spacemit: k1: add TLV EEPROM support in SPL Raymond Mao
2026-02-10 15:14 ` [PATCH v2 13/16] spacemit: k1: Add DDR firmware support to SPL Raymond Mao
2026-02-10 15:14 ` [PATCH v2 14/16] power: pmic: add support for Spacemit P1 PMIC Raymond Mao
2026-03-03  3:37   ` Peng Fan
2026-02-10 15:14 ` [PATCH v2 15/16] power: regulator: add support for Spacemit P1 SoC Raymond Mao
2026-03-03  3:37   ` Peng Fan
2026-02-10 15:14 ` [PATCH v2 16/16] board: k1: enable pmic in spl Raymond Mao
2026-02-25 14:53 ` [PATCH v2 00/16] Add board support for Spacemit K1 SoC in SPL Raymond Mao
2026-03-02 14:36   ` Raymond Mao
2026-03-11  7:37 ` [PATCH] doc: spacemit: add K1 SPL build and test guide Guodong Xu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260210151459.2348758-2-raymondmaoca@gmail.com \
    --to=raymondmaoca@gmail.com \
    --cc=dlan@gentoo.org \
    --cc=hs@nabladev.com \
    --cc=jh80.chung@samsung.com \
    --cc=junhui.liu@pigmoral.tech \
    --cc=lukma@denx.de \
    --cc=neil.armstrong@linaro.org \
    --cc=peng.fan@nxp.com \
    --cc=quentin.schulz@cherry.de \
    --cc=randolph@andestech.com \
    --cc=raymond.mao@riscstar.com \
    --cc=rick@andestech.com \
    --cc=samuel@sholland.org \
    --cc=trini@konsulko.com \
    --cc=u-boot-spacemit@groups.io \
    --cc=u-boot@lists.denx.de \
    --cc=uboot@riscstar.com \
    --cc=xypron.glpk@gmx.de \
    --cc=ycliang@andestech.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.