From: Raymond Mao <raymondmaoca@gmail.com>
To: u-boot@lists.denx.de
Cc: uboot@riscstar.com, u-boot-spacemit@groups.io,
raymond.mao@riscstar.com, rick@andestech.com,
ycliang@andestech.com, trini@konsulko.com, lukma@denx.de,
hs@nabladev.com, jh80.chung@samsung.com, peng.fan@nxp.com,
xypron.glpk@gmx.de, randolph@andestech.com, dlan@gentoo.org,
junhui.liu@pigmoral.tech, neil.armstrong@linaro.org,
quentin.schulz@cherry.de, samuel@sholland.org,
raymondmaoca@gmail.com
Subject: [PATCH v2 05/16] dt-bindings: clock: import k1-syscon from upstream
Date: Tue, 10 Feb 2026 10:14:48 -0500 [thread overview]
Message-ID: <20260210151459.2348758-6-raymondmaoca@gmail.com> (raw)
In-Reply-To: <20260210151459.2348758-1-raymondmaoca@gmail.com>
From: Raymond Mao <raymond.mao@riscstar.com>
Import spacemit,k1-syscon.h from upstream folder. And remove
duplicated reset IDs in it.
Signed-off-by: Raymond Mao <raymond.mao@riscstar.com>
---
.../dt-bindings/clock/spacemit,k1-syscon.h | 253 ++++++++++++++++++
1 file changed, 253 insertions(+)
create mode 100644 include/dt-bindings/clock/spacemit,k1-syscon.h
diff --git a/include/dt-bindings/clock/spacemit,k1-syscon.h b/include/dt-bindings/clock/spacemit,k1-syscon.h
new file mode 100644
index 00000000000..c33da4ce73b
--- /dev/null
+++ b/include/dt-bindings/clock/spacemit,k1-syscon.h
@@ -0,0 +1,253 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (C) 2024-2025 Haylen Chu <heylenay@outlook.com>
+ */
+
+#ifndef _DT_BINDINGS_SPACEMIT_CCU_H_
+#define _DT_BINDINGS_SPACEMIT_CCU_H_
+
+/* APBS (PLL) clocks */
+#define CLK_PLL1 0
+#define CLK_PLL2 1
+#define CLK_PLL3 2
+#define CLK_PLL1_D2 3
+#define CLK_PLL1_D3 4
+#define CLK_PLL1_D4 5
+#define CLK_PLL1_D5 6
+#define CLK_PLL1_D6 7
+#define CLK_PLL1_D7 8
+#define CLK_PLL1_D8 9
+#define CLK_PLL1_D11 10
+#define CLK_PLL1_D13 11
+#define CLK_PLL1_D23 12
+#define CLK_PLL1_D64 13
+#define CLK_PLL1_D10_AUD 14
+#define CLK_PLL1_D100_AUD 15
+#define CLK_PLL2_D1 16
+#define CLK_PLL2_D2 17
+#define CLK_PLL2_D3 18
+#define CLK_PLL2_D4 19
+#define CLK_PLL2_D5 20
+#define CLK_PLL2_D6 21
+#define CLK_PLL2_D7 22
+#define CLK_PLL2_D8 23
+#define CLK_PLL3_D1 24
+#define CLK_PLL3_D2 25
+#define CLK_PLL3_D3 26
+#define CLK_PLL3_D4 27
+#define CLK_PLL3_D5 28
+#define CLK_PLL3_D6 29
+#define CLK_PLL3_D7 30
+#define CLK_PLL3_D8 31
+#define CLK_PLL3_80 32
+#define CLK_PLL3_40 33
+#define CLK_PLL3_20 34
+
+/* MPMU clocks */
+#define CLK_PLL1_307P2 0
+#define CLK_PLL1_76P8 1
+#define CLK_PLL1_61P44 2
+#define CLK_PLL1_153P6 3
+#define CLK_PLL1_102P4 4
+#define CLK_PLL1_51P2 5
+#define CLK_PLL1_51P2_AP 6
+#define CLK_PLL1_57P6 7
+#define CLK_PLL1_25P6 8
+#define CLK_PLL1_12P8 9
+#define CLK_PLL1_12P8_WDT 10
+#define CLK_PLL1_6P4 11
+#define CLK_PLL1_3P2 12
+#define CLK_PLL1_1P6 13
+#define CLK_PLL1_0P8 14
+#define CLK_PLL1_409P6 15
+#define CLK_PLL1_204P8 16
+#define CLK_PLL1_491 17
+#define CLK_PLL1_245P76 18
+#define CLK_PLL1_614 19
+#define CLK_PLL1_47P26 20
+#define CLK_PLL1_31P5 21
+#define CLK_PLL1_819 22
+#define CLK_PLL1_1228 23
+#define CLK_SLOW_UART 24
+#define CLK_SLOW_UART1 25
+#define CLK_SLOW_UART2 26
+#define CLK_WDT 27
+#define CLK_RIPC 28
+#define CLK_I2S_SYSCLK 29
+#define CLK_I2S_BCLK 30
+#define CLK_APB 31
+#define CLK_WDT_BUS 32
+#define CLK_I2S_153P6 33
+#define CLK_I2S_153P6_BASE 34
+#define CLK_I2S_SYSCLK_SRC 35
+#define CLK_I2S_BCLK_FACTOR 36
+
+/* APBC clocks */
+#define CLK_UART0 0
+#define CLK_UART2 1
+#define CLK_UART3 2
+#define CLK_UART4 3
+#define CLK_UART5 4
+#define CLK_UART6 5
+#define CLK_UART7 6
+#define CLK_UART8 7
+#define CLK_UART9 8
+#define CLK_GPIO 9
+#define CLK_PWM0 10
+#define CLK_PWM1 11
+#define CLK_PWM2 12
+#define CLK_PWM3 13
+#define CLK_PWM4 14
+#define CLK_PWM5 15
+#define CLK_PWM6 16
+#define CLK_PWM7 17
+#define CLK_PWM8 18
+#define CLK_PWM9 19
+#define CLK_PWM10 20
+#define CLK_PWM11 21
+#define CLK_PWM12 22
+#define CLK_PWM13 23
+#define CLK_PWM14 24
+#define CLK_PWM15 25
+#define CLK_PWM16 26
+#define CLK_PWM17 27
+#define CLK_PWM18 28
+#define CLK_PWM19 29
+#define CLK_SSP3 30
+#define CLK_RTC 31
+#define CLK_TWSI0 32
+#define CLK_TWSI1 33
+#define CLK_TWSI2 34
+#define CLK_TWSI4 35
+#define CLK_TWSI5 36
+#define CLK_TWSI6 37
+#define CLK_TWSI7 38
+#define CLK_TWSI8 39
+#define CLK_TIMERS1 40
+#define CLK_TIMERS2 41
+#define CLK_AIB 42
+#define CLK_ONEWIRE 43
+#define CLK_SSPA0 44
+#define CLK_SSPA1 45
+#define CLK_DRO 46
+#define CLK_IR 47
+#define CLK_TSEN 48
+#define CLK_IPC_AP2AUD 49
+#define CLK_CAN0 50
+#define CLK_CAN0_BUS 51
+#define CLK_UART0_BUS 52
+#define CLK_UART2_BUS 53
+#define CLK_UART3_BUS 54
+#define CLK_UART4_BUS 55
+#define CLK_UART5_BUS 56
+#define CLK_UART6_BUS 57
+#define CLK_UART7_BUS 58
+#define CLK_UART8_BUS 59
+#define CLK_UART9_BUS 60
+#define CLK_GPIO_BUS 61
+#define CLK_PWM0_BUS 62
+#define CLK_PWM1_BUS 63
+#define CLK_PWM2_BUS 64
+#define CLK_PWM3_BUS 65
+#define CLK_PWM4_BUS 66
+#define CLK_PWM5_BUS 67
+#define CLK_PWM6_BUS 68
+#define CLK_PWM7_BUS 69
+#define CLK_PWM8_BUS 70
+#define CLK_PWM9_BUS 71
+#define CLK_PWM10_BUS 72
+#define CLK_PWM11_BUS 73
+#define CLK_PWM12_BUS 74
+#define CLK_PWM13_BUS 75
+#define CLK_PWM14_BUS 76
+#define CLK_PWM15_BUS 77
+#define CLK_PWM16_BUS 78
+#define CLK_PWM17_BUS 79
+#define CLK_PWM18_BUS 80
+#define CLK_PWM19_BUS 81
+#define CLK_SSP3_BUS 82
+#define CLK_RTC_BUS 83
+#define CLK_TWSI0_BUS 84
+#define CLK_TWSI1_BUS 85
+#define CLK_TWSI2_BUS 86
+#define CLK_TWSI4_BUS 87
+#define CLK_TWSI5_BUS 88
+#define CLK_TWSI6_BUS 89
+#define CLK_TWSI7_BUS 90
+#define CLK_TWSI8_BUS 91
+#define CLK_TIMERS1_BUS 92
+#define CLK_TIMERS2_BUS 93
+#define CLK_AIB_BUS 94
+#define CLK_ONEWIRE_BUS 95
+#define CLK_SSPA0_BUS 96
+#define CLK_SSPA1_BUS 97
+#define CLK_TSEN_BUS 98
+#define CLK_IPC_AP2AUD_BUS 99
+#define CLK_SSPA0_I2S_BCLK 100
+#define CLK_SSPA1_I2S_BCLK 101
+
+/* APMU clocks */
+#define CLK_CCI550 0
+#define CLK_CPU_C0_HI 1
+#define CLK_CPU_C0_CORE 2
+#define CLK_CPU_C0_ACE 3
+#define CLK_CPU_C0_TCM 4
+#define CLK_CPU_C1_HI 5
+#define CLK_CPU_C1_CORE 6
+#define CLK_CPU_C1_ACE 7
+#define CLK_CCIC_4X 8
+#define CLK_CCIC1PHY 9
+#define CLK_SDH_AXI 10
+#define CLK_SDH0 11
+#define CLK_SDH1 12
+#define CLK_SDH2 13
+#define CLK_USB_P1 14
+#define CLK_USB_AXI 15
+#define CLK_USB30 16
+#define CLK_QSPI 17
+#define CLK_QSPI_BUS 18
+#define CLK_DMA 19
+#define CLK_AES 20
+#define CLK_VPU 21
+#define CLK_GPU 22
+#define CLK_EMMC 23
+#define CLK_EMMC_X 24
+#define CLK_AUDIO 25
+#define CLK_HDMI 26
+#define CLK_PMUA_ACLK 27
+#define CLK_PCIE0_MASTER 28
+#define CLK_PCIE0_SLAVE 29
+#define CLK_PCIE0_DBI 30
+#define CLK_PCIE1_MASTER 31
+#define CLK_PCIE1_SLAVE 32
+#define CLK_PCIE1_DBI 33
+#define CLK_PCIE2_MASTER 34
+#define CLK_PCIE2_SLAVE 35
+#define CLK_PCIE2_DBI 36
+#define CLK_EMAC0_BUS 37
+#define CLK_EMAC0_PTP 38
+#define CLK_EMAC1_BUS 39
+#define CLK_EMAC1_PTP 40
+#define CLK_JPG 41
+#define CLK_CCIC2PHY 42
+#define CLK_CCIC3PHY 43
+#define CLK_CSI 44
+#define CLK_CAMM0 45
+#define CLK_CAMM1 46
+#define CLK_CAMM2 47
+#define CLK_ISP_CPP 48
+#define CLK_ISP_BUS 49
+#define CLK_ISP 50
+#define CLK_DPU_MCLK 51
+#define CLK_DPU_ESC 52
+#define CLK_DPU_BIT 53
+#define CLK_DPU_PXCLK 54
+#define CLK_DPU_HCLK 55
+#define CLK_DPU_SPI 56
+#define CLK_DPU_SPI_HBUS 57
+#define CLK_DPU_SPIBUS 58
+#define CLK_DPU_SPI_ACLK 59
+#define CLK_V2D 60
+#define CLK_EMMC_BUS 61
+
+#endif /* _DT_BINDINGS_SPACEMIT_CCU_H_ */
--
2.25.1
next prev parent reply other threads:[~2026-02-10 15:16 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-10 15:14 [PATCH v2 00/16] Add board support for Spacemit K1 SoC in SPL Raymond Mao
2026-02-10 15:14 ` [PATCH v2 01/16] spacemit: k1: support multi-board infrastructure Raymond Mao
2026-03-19 6:44 ` Leo Liang
2026-02-10 15:14 ` [PATCH v2 02/16] spacemit: k1: enable SPL with debug UART Raymond Mao
2026-02-10 15:14 ` [PATCH v2 03/16] configs: k1: enable early timer support Raymond Mao
2026-02-10 15:14 ` [PATCH v2 04/16] reset: k1: add SPL support and enable TWSI8 reset Raymond Mao
2026-02-10 15:14 ` Raymond Mao [this message]
2026-02-10 15:14 ` [PATCH v2 06/16] dts: k1: import dts file from upstream folder Raymond Mao
2026-02-10 15:14 ` [PATCH v2 07/16] clk: spacemit: Add support for K1 SoC Raymond Mao
2026-02-10 15:14 ` [PATCH v2 08/16] dts: k1: enable clocks in SPL Raymond Mao
2026-02-10 15:14 ` [PATCH v2 09/16] board: k1: initialize clock and serial devices " Raymond Mao
2026-02-10 15:14 ` [PATCH v2 10/16] configs: k1: add default option for clock driver " Raymond Mao
2026-02-10 15:14 ` [PATCH v2 11/16] i2c: k1: add I2C driver support Raymond Mao
2026-02-11 4:57 ` Heiko Schocher
2026-02-10 15:14 ` [PATCH v2 12/16] spacemit: k1: add TLV EEPROM support in SPL Raymond Mao
2026-02-10 15:14 ` [PATCH v2 13/16] spacemit: k1: Add DDR firmware support to SPL Raymond Mao
2026-02-10 15:14 ` [PATCH v2 14/16] power: pmic: add support for Spacemit P1 PMIC Raymond Mao
2026-03-03 3:37 ` Peng Fan
2026-02-10 15:14 ` [PATCH v2 15/16] power: regulator: add support for Spacemit P1 SoC Raymond Mao
2026-03-03 3:37 ` Peng Fan
2026-02-10 15:14 ` [PATCH v2 16/16] board: k1: enable pmic in spl Raymond Mao
2026-02-25 14:53 ` [PATCH v2 00/16] Add board support for Spacemit K1 SoC in SPL Raymond Mao
2026-03-02 14:36 ` Raymond Mao
2026-03-11 7:37 ` [PATCH] doc: spacemit: add K1 SPL build and test guide Guodong Xu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260210151459.2348758-6-raymondmaoca@gmail.com \
--to=raymondmaoca@gmail.com \
--cc=dlan@gentoo.org \
--cc=hs@nabladev.com \
--cc=jh80.chung@samsung.com \
--cc=junhui.liu@pigmoral.tech \
--cc=lukma@denx.de \
--cc=neil.armstrong@linaro.org \
--cc=peng.fan@nxp.com \
--cc=quentin.schulz@cherry.de \
--cc=randolph@andestech.com \
--cc=raymond.mao@riscstar.com \
--cc=rick@andestech.com \
--cc=samuel@sholland.org \
--cc=trini@konsulko.com \
--cc=u-boot-spacemit@groups.io \
--cc=u-boot@lists.denx.de \
--cc=uboot@riscstar.com \
--cc=xypron.glpk@gmx.de \
--cc=ycliang@andestech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.