From: Ronald Claveau <linux-kernel-dev@aliel.fr>
To: linux-amlogic@lists.infradead.org
Cc: Ronald Claveau <linux-kernel-dev@aliel.fr>,
Neil Armstrong <neil.armstrong@linaro.org>,
Jerome Brunet <jbrunet@baylibre.com>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
Kevin Hilman <khilman@baylibre.com>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 1/7] drivers: clk: meson: Add Amlogic T7 fix pll support
Date: Wed, 18 Feb 2026 11:17:06 +0100 [thread overview]
Message-ID: <20260218101709.35450-1-linux-kernel-dev@aliel.fr> (raw)
Add PLL for the clock controller of the Amlogic T7 SoC family.
Signed-off-by: Ronald Claveau <linux-kernel-dev@aliel.fr>
---
drivers/clk/meson/t7-pll.c | 257 +++++++++++++++++++++++++++++++++++++
1 file changed, 257 insertions(+)
diff --git a/drivers/clk/meson/t7-pll.c b/drivers/clk/meson/t7-pll.c
index 0a622f45fa36..3dd3aca50b7c 100644
--- a/drivers/clk/meson/t7-pll.c
+++ b/drivers/clk/meson/t7-pll.c
@@ -71,6 +71,15 @@
#define MCLK_PLL_CNTL4 0x10
#define MCLK_PLL_STS 0x14
+#define FPLL_CTRL0 0x00
+#define FPLL_CTRL1 0x04
+#define FPLL_CTRL2 0x08
+#define FPLL_CTRL3 0x0c
+#define FPLL_CTRL4 0x10
+#define FPLL_CTRL5 0x14
+#define FPLL_CTRL6 0x18
+#define FPLL_STS 0x1c
+
static const struct pll_mult_range t7_media_pll_mult_range = {
.min = 125,
.max = 250,
@@ -1047,6 +1056,253 @@ static const struct meson_clkc_data t7_mclk_data = {
},
};
+static struct clk_regmap t7_fpll_dco = {
+ .data = &(struct meson_clk_pll_data){
+ .en = {
+ .reg_off = FPLL_CTRL0,
+ .shift = 28,
+ .width = 1,
+ },
+ .m = {
+ .reg_off = FPLL_CTRL0,
+ .shift = 0,
+ .width = 8,
+ },
+ .n = {
+ .reg_off = FPLL_CTRL0,
+ .shift = 10,
+ .width = 5,
+ },
+ .frac = {
+ .reg_off = FPLL_CTRL1,
+ .shift = 0,
+ .width = 17,
+ },
+ .l = {
+ .reg_off = FPLL_CTRL0,
+ .shift = 31,
+ .width = 1,
+ },
+ .rst = {
+ .reg_off = FPLL_CTRL0,
+ .shift = 29,
+ .width = 1,
+ },
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "fpll_dco",
+ .ops = &meson_clk_pll_ro_ops,
+ .parent_data = &(const struct clk_parent_data) {
+ .fw_name = "xtal",
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap t7_fpll = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = FPLL_CTRL0,
+ .shift = 16,
+ .width = 2,
+ .flags = CLK_DIVIDER_POWER_OF_TWO,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "fpll",
+ .ops = &clk_regmap_divider_ro_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &t7_fpll_dco.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_fixed_factor t7_fdiv2_div = {
+ .mult = 1,
+ .div = 2,
+ .hw.init = &(struct clk_init_data){
+ .name = "fdiv2_div",
+ .ops = &clk_fixed_factor_ops,
+ .parent_hws = (const struct clk_hw *[]) { &t7_fpll.hw },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap t7_fdiv2 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = FPLL_CTRL1,
+ .bit_idx = 24,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "fdiv2",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &t7_fdiv2_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_IS_CRITICAL,
+ },
+};
+
+static struct clk_fixed_factor t7_fdiv2p5_div = {
+ .mult = 2,
+ .div = 5,
+ .hw.init = &(struct clk_init_data){
+ .name = "fdiv2p5_div",
+ .ops = &clk_fixed_factor_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &t7_fpll.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap t7_fdiv2p5 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = FPLL_CTRL1,
+ .bit_idx = 25,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "fdiv2p5",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &t7_fdiv2p5_div.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_fixed_factor t7_fdiv3_div = {
+ .mult = 1,
+ .div = 3,
+ .hw.init = &(struct clk_init_data){
+ .name = "fdiv3_div",
+ .ops = &clk_fixed_factor_ops,
+ .parent_hws = (const struct clk_hw *[]) { &t7_fpll.hw },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap t7_fdiv3 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = FPLL_CTRL1,
+ .bit_idx = 20,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "fdiv3",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &t7_fdiv3_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_IS_CRITICAL,
+ },
+};
+
+static struct clk_fixed_factor t7_fdiv4_div = {
+ .mult = 1,
+ .div = 4,
+ .hw.init = &(struct clk_init_data){
+ .name = "fdiv4_div",
+ .ops = &clk_fixed_factor_ops,
+ .parent_hws = (const struct clk_hw *[]) { &t7_fpll.hw },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap t7_fdiv4 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = FPLL_CTRL1,
+ .bit_idx = 21,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "fdiv4",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &t7_fdiv4_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_IS_CRITICAL,
+ },
+};
+
+static struct clk_fixed_factor t7_fdiv5_div = {
+ .mult = 1,
+ .div = 5,
+ .hw.init = &(struct clk_init_data){
+ .name = "fdiv5_div",
+ .ops = &clk_fixed_factor_ops,
+ .parent_hws = (const struct clk_hw *[]) { &t7_fpll.hw },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap t7_fdiv5 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = FPLL_CTRL1,
+ .bit_idx = 22,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "fdiv5",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &t7_fdiv5_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_IS_CRITICAL,
+ },
+};
+
+static struct clk_fixed_factor t7_fdiv7_div = {
+ .mult = 1,
+ .div = 7,
+ .hw.init = &(struct clk_init_data){
+ .name = "fdiv7_div",
+ .ops = &clk_fixed_factor_ops,
+ .parent_hws = (const struct clk_hw *[]) { &t7_fpll.hw },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap t7_fdiv7 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = FPLL_CTRL1,
+ .bit_idx = 23,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "fdiv7",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &t7_fdiv7_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_IS_CRITICAL,
+ },
+};
+
+static struct clk_hw *t7_fpll_hw_clks[] = {
+ [CLKID_FPLL_DCO] = &t7_fpll_dco.hw,
+ [CLKID_FPLL] = &t7_fpll.hw,
+ [CLKID_FDIV2_DIV] = &t7_fdiv2_div.hw,
+ [CLKID_FDIV2] = &t7_fdiv2.hw,
+ [CLKID_FDIV2P5_DIV] = &t7_fdiv2p5_div.hw,
+ [CLKID_FDIV2P5] = &t7_fdiv2p5.hw,
+ [CLKID_FDIV3_DIV] = &t7_fdiv3_div.hw,
+ [CLKID_FDIV3] = &t7_fdiv3.hw,
+ [CLKID_FDIV4_DIV] = &t7_fdiv4_div.hw,
+ [CLKID_FDIV4] = &t7_fdiv4.hw,
+ [CLKID_FDIV5_DIV] = &t7_fdiv5_div.hw,
+ [CLKID_FDIV5] = &t7_fdiv5.hw,
+ [CLKID_FDIV7_DIV] = &t7_fdiv7_div.hw,
+ [CLKID_FDIV7] = &t7_fdiv7.hw,
+};
+
+static const struct meson_clkc_data t7_fpll_data = {
+ .hw_clks = {
+ .hws = t7_fpll_hw_clks,
+ .num = ARRAY_SIZE(t7_fpll_hw_clks),
+ },
+};
+
static const struct of_device_id t7_pll_clkc_match_table[] = {
{ .compatible = "amlogic,t7-gp0-pll", .data = &t7_gp0_data, },
{ .compatible = "amlogic,t7-gp1-pll", .data = &t7_gp1_data, },
@@ -1055,6 +1311,7 @@ static const struct of_device_id t7_pll_clkc_match_table[] = {
{ .compatible = "amlogic,t7-mpll", .data = &t7_mpll_data, },
{ .compatible = "amlogic,t7-hdmi-pll", .data = &t7_hdmi_data, },
{ .compatible = "amlogic,t7-mclk-pll", .data = &t7_mclk_data, },
+ { .compatible = "amlogic,t7-fpll", .data = &t7_fpll_data, },
{}
};
MODULE_DEVICE_TABLE(of, t7_pll_clkc_match_table);
--
2.49.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
WARNING: multiple messages have this Message-ID (diff)
From: Ronald Claveau <linux-kernel-dev@aliel.fr>
To: linux-amlogic@lists.infradead.org
Cc: Ronald Claveau <linux-kernel-dev@aliel.fr>,
Neil Armstrong <neil.armstrong@linaro.org>,
Jerome Brunet <jbrunet@baylibre.com>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
Kevin Hilman <khilman@baylibre.com>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 1/7] drivers: clk: meson: Add Amlogic T7 fix pll support
Date: Wed, 18 Feb 2026 11:17:06 +0100 [thread overview]
Message-ID: <20260218101709.35450-1-linux-kernel-dev@aliel.fr> (raw)
Add PLL for the clock controller of the Amlogic T7 SoC family.
Signed-off-by: Ronald Claveau <linux-kernel-dev@aliel.fr>
---
drivers/clk/meson/t7-pll.c | 257 +++++++++++++++++++++++++++++++++++++
1 file changed, 257 insertions(+)
diff --git a/drivers/clk/meson/t7-pll.c b/drivers/clk/meson/t7-pll.c
index 0a622f45fa36..3dd3aca50b7c 100644
--- a/drivers/clk/meson/t7-pll.c
+++ b/drivers/clk/meson/t7-pll.c
@@ -71,6 +71,15 @@
#define MCLK_PLL_CNTL4 0x10
#define MCLK_PLL_STS 0x14
+#define FPLL_CTRL0 0x00
+#define FPLL_CTRL1 0x04
+#define FPLL_CTRL2 0x08
+#define FPLL_CTRL3 0x0c
+#define FPLL_CTRL4 0x10
+#define FPLL_CTRL5 0x14
+#define FPLL_CTRL6 0x18
+#define FPLL_STS 0x1c
+
static const struct pll_mult_range t7_media_pll_mult_range = {
.min = 125,
.max = 250,
@@ -1047,6 +1056,253 @@ static const struct meson_clkc_data t7_mclk_data = {
},
};
+static struct clk_regmap t7_fpll_dco = {
+ .data = &(struct meson_clk_pll_data){
+ .en = {
+ .reg_off = FPLL_CTRL0,
+ .shift = 28,
+ .width = 1,
+ },
+ .m = {
+ .reg_off = FPLL_CTRL0,
+ .shift = 0,
+ .width = 8,
+ },
+ .n = {
+ .reg_off = FPLL_CTRL0,
+ .shift = 10,
+ .width = 5,
+ },
+ .frac = {
+ .reg_off = FPLL_CTRL1,
+ .shift = 0,
+ .width = 17,
+ },
+ .l = {
+ .reg_off = FPLL_CTRL0,
+ .shift = 31,
+ .width = 1,
+ },
+ .rst = {
+ .reg_off = FPLL_CTRL0,
+ .shift = 29,
+ .width = 1,
+ },
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "fpll_dco",
+ .ops = &meson_clk_pll_ro_ops,
+ .parent_data = &(const struct clk_parent_data) {
+ .fw_name = "xtal",
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap t7_fpll = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = FPLL_CTRL0,
+ .shift = 16,
+ .width = 2,
+ .flags = CLK_DIVIDER_POWER_OF_TWO,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "fpll",
+ .ops = &clk_regmap_divider_ro_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &t7_fpll_dco.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_fixed_factor t7_fdiv2_div = {
+ .mult = 1,
+ .div = 2,
+ .hw.init = &(struct clk_init_data){
+ .name = "fdiv2_div",
+ .ops = &clk_fixed_factor_ops,
+ .parent_hws = (const struct clk_hw *[]) { &t7_fpll.hw },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap t7_fdiv2 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = FPLL_CTRL1,
+ .bit_idx = 24,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "fdiv2",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &t7_fdiv2_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_IS_CRITICAL,
+ },
+};
+
+static struct clk_fixed_factor t7_fdiv2p5_div = {
+ .mult = 2,
+ .div = 5,
+ .hw.init = &(struct clk_init_data){
+ .name = "fdiv2p5_div",
+ .ops = &clk_fixed_factor_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &t7_fpll.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap t7_fdiv2p5 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = FPLL_CTRL1,
+ .bit_idx = 25,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "fdiv2p5",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &t7_fdiv2p5_div.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_fixed_factor t7_fdiv3_div = {
+ .mult = 1,
+ .div = 3,
+ .hw.init = &(struct clk_init_data){
+ .name = "fdiv3_div",
+ .ops = &clk_fixed_factor_ops,
+ .parent_hws = (const struct clk_hw *[]) { &t7_fpll.hw },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap t7_fdiv3 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = FPLL_CTRL1,
+ .bit_idx = 20,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "fdiv3",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &t7_fdiv3_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_IS_CRITICAL,
+ },
+};
+
+static struct clk_fixed_factor t7_fdiv4_div = {
+ .mult = 1,
+ .div = 4,
+ .hw.init = &(struct clk_init_data){
+ .name = "fdiv4_div",
+ .ops = &clk_fixed_factor_ops,
+ .parent_hws = (const struct clk_hw *[]) { &t7_fpll.hw },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap t7_fdiv4 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = FPLL_CTRL1,
+ .bit_idx = 21,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "fdiv4",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &t7_fdiv4_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_IS_CRITICAL,
+ },
+};
+
+static struct clk_fixed_factor t7_fdiv5_div = {
+ .mult = 1,
+ .div = 5,
+ .hw.init = &(struct clk_init_data){
+ .name = "fdiv5_div",
+ .ops = &clk_fixed_factor_ops,
+ .parent_hws = (const struct clk_hw *[]) { &t7_fpll.hw },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap t7_fdiv5 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = FPLL_CTRL1,
+ .bit_idx = 22,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "fdiv5",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &t7_fdiv5_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_IS_CRITICAL,
+ },
+};
+
+static struct clk_fixed_factor t7_fdiv7_div = {
+ .mult = 1,
+ .div = 7,
+ .hw.init = &(struct clk_init_data){
+ .name = "fdiv7_div",
+ .ops = &clk_fixed_factor_ops,
+ .parent_hws = (const struct clk_hw *[]) { &t7_fpll.hw },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap t7_fdiv7 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = FPLL_CTRL1,
+ .bit_idx = 23,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "fdiv7",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &t7_fdiv7_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_IS_CRITICAL,
+ },
+};
+
+static struct clk_hw *t7_fpll_hw_clks[] = {
+ [CLKID_FPLL_DCO] = &t7_fpll_dco.hw,
+ [CLKID_FPLL] = &t7_fpll.hw,
+ [CLKID_FDIV2_DIV] = &t7_fdiv2_div.hw,
+ [CLKID_FDIV2] = &t7_fdiv2.hw,
+ [CLKID_FDIV2P5_DIV] = &t7_fdiv2p5_div.hw,
+ [CLKID_FDIV2P5] = &t7_fdiv2p5.hw,
+ [CLKID_FDIV3_DIV] = &t7_fdiv3_div.hw,
+ [CLKID_FDIV3] = &t7_fdiv3.hw,
+ [CLKID_FDIV4_DIV] = &t7_fdiv4_div.hw,
+ [CLKID_FDIV4] = &t7_fdiv4.hw,
+ [CLKID_FDIV5_DIV] = &t7_fdiv5_div.hw,
+ [CLKID_FDIV5] = &t7_fdiv5.hw,
+ [CLKID_FDIV7_DIV] = &t7_fdiv7_div.hw,
+ [CLKID_FDIV7] = &t7_fdiv7.hw,
+};
+
+static const struct meson_clkc_data t7_fpll_data = {
+ .hw_clks = {
+ .hws = t7_fpll_hw_clks,
+ .num = ARRAY_SIZE(t7_fpll_hw_clks),
+ },
+};
+
static const struct of_device_id t7_pll_clkc_match_table[] = {
{ .compatible = "amlogic,t7-gp0-pll", .data = &t7_gp0_data, },
{ .compatible = "amlogic,t7-gp1-pll", .data = &t7_gp1_data, },
@@ -1055,6 +1311,7 @@ static const struct of_device_id t7_pll_clkc_match_table[] = {
{ .compatible = "amlogic,t7-mpll", .data = &t7_mpll_data, },
{ .compatible = "amlogic,t7-hdmi-pll", .data = &t7_hdmi_data, },
{ .compatible = "amlogic,t7-mclk-pll", .data = &t7_mclk_data, },
+ { .compatible = "amlogic,t7-fpll", .data = &t7_fpll_data, },
{}
};
MODULE_DEVICE_TABLE(of, t7_pll_clkc_match_table);
--
2.49.0
next reply other threads:[~2026-02-18 10:17 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-18 10:17 Ronald Claveau [this message]
2026-02-18 10:17 ` [PATCH 1/7] drivers: clk: meson: Add Amlogic T7 fix pll support Ronald Claveau
2026-02-18 10:53 ` [PATCH 7/7] arm64: dts: amlogic: Add EMMC for T7 khadas VIM4 Ronald Claveau
2026-02-18 10:53 ` Ronald Claveau
2026-02-18 10:56 ` [PATCH 2/7] dt-bindings: clk: meson: Add Amlogic T7 fix pll support Ronald Claveau
2026-02-18 10:56 ` Ronald Claveau
2026-02-18 18:09 ` Jerome Brunet
2026-02-18 18:09 ` Jerome Brunet
2026-02-18 19:17 ` Krzysztof Kozlowski
2026-02-18 19:17 ` Krzysztof Kozlowski
2026-02-18 19:28 ` Jerome Brunet
2026-02-18 19:28 ` Jerome Brunet
2026-02-18 19:37 ` Krzysztof Kozlowski
2026-02-18 19:37 ` Krzysztof Kozlowski
2026-02-18 19:39 ` Krzysztof Kozlowski
2026-02-18 19:39 ` Krzysztof Kozlowski
2026-02-18 10:57 ` [PATCH 3/7] " Ronald Claveau
2026-02-18 10:57 ` Ronald Claveau
2026-02-18 18:13 ` Jerome Brunet
2026-02-18 18:13 ` Jerome Brunet
2026-02-18 11:00 ` [PATCH 4/7] drivers: clk: meson: Add Amlogic T7 sys " Ronald Claveau
2026-02-18 11:00 ` Ronald Claveau
2026-02-18 18:30 ` Jerome Brunet
2026-02-18 18:30 ` Jerome Brunet
2026-02-18 11:01 ` [PATCH 5/7] dt-bindings: " Ronald Claveau
2026-02-18 11:01 ` Ronald Claveau
2026-02-18 11:10 ` Ferass El Hafidi
2026-02-18 11:10 ` Ferass El Hafidi
2026-02-18 17:32 ` Ronald Claveau
2026-02-18 17:32 ` Ronald Claveau
2026-02-18 19:18 ` Krzysztof Kozlowski
2026-02-18 19:18 ` Krzysztof Kozlowski
2026-02-18 11:20 ` [PATCH 6/7] arm64: dts: amlogic: Add clock and EMMC for T7 Ronald Claveau
2026-02-18 11:20 ` Ronald Claveau
2026-02-18 18:34 ` Jerome Brunet
2026-02-18 18:34 ` Jerome Brunet
2026-02-18 19:18 ` Krzysztof Kozlowski
2026-02-18 19:18 ` Krzysztof Kozlowski
2026-02-18 18:05 ` [PATCH 1/7] drivers: clk: meson: Add Amlogic T7 fix pll support Jerome Brunet
2026-02-18 18:05 ` Jerome Brunet
2026-02-26 14:30 ` Ronald Claveau
2026-02-26 14:30 ` Ronald Claveau
2026-03-04 9:14 ` Jian Hu
2026-03-04 9:14 ` Jian Hu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260218101709.35450-1-linux-kernel-dev@aliel.fr \
--to=linux-kernel-dev@aliel.fr \
--cc=jbrunet@baylibre.com \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=martin.blumenstingl@googlemail.com \
--cc=mturquette@baylibre.com \
--cc=neil.armstrong@linaro.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.