All of lore.kernel.org
 help / color / mirror / Atom feed
From: Stephen Hemminger <stephen@networkplumber.org>
To: spinler@cesnet.cz
Cc: dev@dpdk.org
Subject: Re: [PATCH v2 0/6] net/nfb: ethernet enhancements
Date: Wed, 18 Feb 2026 10:21:53 -0800	[thread overview]
Message-ID: <20260218102153.6d45f4e0@phoenix.local> (raw)
In-Reply-To: <20260217110324.3344310-1-spinler@cesnet.cz>

On Tue, 17 Feb 2026 12:03:18 +0100
spinler@cesnet.cz wrote:

> From: Martin Spinler <spinler@cesnet.cz>
> 
> This set includes minor enhancements to the Ethernet
> configuration and overall usage.
> 
> ---
> Depends-on: series-37385 ("net/nfb: rework to real multiport")
> 
> v2:
> * P2/7: close MDIO handles in error path of nfb_nc_eth_init
> * P2/7: add bounds check for eth_node population
> * P2/7: add check for nfb_mdio_if_read_pma() return value
>         in nfb_mdio_cl45_pma_get_speed_capa()
> * P2/7: add include guard to nfb_mdio.h
> * P3/7: move nfb_eth_dev_set_link() (PMA configuration)
>         before MAC enable/disable call to avoid inconsistency on failure
> * P4/7: add check for nfb_mdio_if_write_pma() return value
> * P5/7: set dev_info->max_mtu
> * P5/7: add frame_len_max_cap to struct pmd_priv; used in MTU configuration
> * P5/7: extract nfb_mac_read_frame_len_max_cap() from nfb_eth_mtu_set()
> * P5/7: check for MTU overflow
> * P6/7: use direct value for stats->ierrors from rx_cntrs
> * P7/7: remove this patch completely and distribute release notes update
>         to matching patches
> 
> Martin Spinler (6):
>   net/nfb: use MAC address assigned to card
>   net/nfb: get correct link speed
>   net/nfb: support real link-up/down config
>   net/nfb: support setting RS-FEC mode
>   net/nfb: support setting Rx MTU
>   net/nfb: read total stats from macs
> 
>  doc/guides/rel_notes/release_26_03.rst |   3 +-
>  drivers/net/nfb/meson.build            |   1 +
>  drivers/net/nfb/nfb.h                  |   8 +
>  drivers/net/nfb/nfb_ethdev.c           | 247 +++++++++++++++++++++----
>  drivers/net/nfb/nfb_mdio.c             |  44 +++++
>  drivers/net/nfb/nfb_mdio.h             |  39 ++++
>  drivers/net/nfb/nfb_stats.c            |  40 ++--
>  7 files changed, 335 insertions(+), 47 deletions(-)
>  create mode 100644 drivers/net/nfb/nfb_mdio.c
>  create mode 100644 drivers/net/nfb/nfb_mdio.h
> 

Queued all these to next-net with small change to avoid overflow when
computing mtu.

      parent reply	other threads:[~2026-02-18 18:21 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-02-06 17:04 [PATCH 0/7] net/nfb: ethernet enhancements spinler
2026-02-06 17:04 ` [PATCH 1/7] net/nfb: use MAC address assigned to card spinler
2026-02-06 17:04 ` [PATCH 2/7] net/nfb: get correct link speed spinler
2026-02-06 17:04 ` [PATCH 3/7] net/nfb: support real link-up/down config spinler
2026-02-06 17:04 ` [PATCH 4/7] net/nfb: support setting RS-FEC mode spinler
2026-02-06 17:04 ` [PATCH 5/7] net/nfb: support setting Rx MTU spinler
2026-02-18 18:20   ` Stephen Hemminger
2026-02-19  6:20     ` Martin Spinler
2026-02-06 17:04 ` [PATCH 6/7] net/nfb: read total stats from macs spinler
2026-02-06 17:04 ` [PATCH 7/7] doc/nfb: update release notes for nfb driver spinler
2026-02-17  4:37   ` Stephen Hemminger
2026-02-10  0:33 ` [PATCH 0/7] net/nfb: ethernet enhancements Stephen Hemminger
2026-02-12 18:52 ` Stephen Hemminger
2026-02-17 11:03 ` [PATCH v2 0/6] " spinler
2026-02-17 11:03   ` [PATCH v2 1/6] net/nfb: use MAC address assigned to card spinler
2026-02-17 11:03   ` [PATCH v2 2/6] net/nfb: get correct link speed spinler
2026-02-17 11:03   ` [PATCH v2 3/6] net/nfb: support real link-up/down config spinler
2026-02-17 11:03   ` [PATCH v2 4/6] net/nfb: support setting RS-FEC mode spinler
2026-02-17 11:03   ` [PATCH v2 5/6] net/nfb: support setting Rx MTU spinler
2026-02-17 11:03   ` [PATCH v2 6/6] net/nfb: read total stats from macs spinler
2026-02-18 18:21   ` Stephen Hemminger [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260218102153.6d45f4e0@phoenix.local \
    --to=stephen@networkplumber.org \
    --cc=dev@dpdk.org \
    --cc=spinler@cesnet.cz \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.