* [PATCH v3 1/5] dt-bindings: PCI: Convert nvidia,tegra-pcie to DT schema
2026-02-24 12:18 [PATCH v3 0/5] PCI: tegra: A couple of cleanups Anand Moon
@ 2026-02-24 12:18 ` Anand Moon
2026-03-06 0:43 ` Rob Herring
2026-02-24 12:18 ` [PATCH v3 2/5] arm64: dts: tegra: tegra186-p2771: Fix invalid PCIe nvidia,num-lanes Anand Moon
` (4 subsequent siblings)
5 siblings, 1 reply; 10+ messages in thread
From: Anand Moon @ 2026-02-24 12:18 UTC (permalink / raw)
To: Thierry Reding, Bjorn Helgaas, Lorenzo Pieralisi,
Krzysztof Wilczyński, Manivannan Sadhasivam, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Jonathan Hunter, Aaron Kling,
open list:PCI DRIVER FOR NVIDIA TEGRA,
open list:PCI DRIVER FOR NVIDIA TEGRA,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list
Cc: Anand Moon
Convert the existing text-based DT bindings documentation for the
NVIDIA Tegra PCIe host controller to a DT schema format.
Also update the MAINTAINERS file to reflect this change.
Cc: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
v3: Tried to address the issues Krzysztof pointed out.
Added missing regulator binding as suggeested by Jon.
v2: Tried to address the isssue Rob pointed
[1] https://lkml.org/lkml/2025/9/26/704
improve the $suject and commit message
drop few examples only nvidia,tegra20-pcie and nvidia,tegra210-pcie
$ make dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/pci/nvidia,tegra-pcie.yaml
---
.../bindings/pci/nvidia,tegra-pcie.yaml | 528 ++++++++++++++
.../bindings/pci/nvidia,tegra20-pcie.txt | 670 ------------------
MAINTAINERS | 2 +-
3 files changed, 529 insertions(+), 671 deletions(-)
create mode 100644 Documentation/devicetree/bindings/pci/nvidia,tegra-pcie.yaml
delete mode 100644 Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra-pcie.yaml b/Documentation/devicetree/bindings/pci/nvidia,tegra-pcie.yaml
new file mode 100644
index 000000000000..0675bec205e8
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/nvidia,tegra-pcie.yaml
@@ -0,0 +1,528 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/nvidia,tegra-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra PCIe Controller
+
+maintainers:
+ - Jon Hunter <jonathanh@nvidia.com>
+ - Thierry Reding <treding@nvidia.com>
+
+description:
+ PCIe controller found on NVIDIA Tegra SoCs which supports multiple
+ root ports and platform-specific clock, reset, and power supply
+ configurations.
+
+properties:
+ compatible:
+ enum:
+ - nvidia,tegra20-pcie
+ - nvidia,tegra30-pcie
+ - nvidia,tegra124-pcie
+ - nvidia,tegra210-pcie
+ - nvidia,tegra186-pcie
+
+ reg:
+ items:
+ - description: PADS registers
+ - description: AFI registers
+ - description: Configuration space region
+
+ reg-names:
+ items:
+ - const: pads
+ - const: afi
+ - const: cs
+
+ interrupts:
+ items:
+ - description: Controller interrupt
+ - description: MSI interrupt
+
+ interrupt-names:
+ items:
+ - const: intr
+ - const: msi
+
+ clocks:
+ minItems: 3
+ items:
+ - description: PCIe clock
+ - description: AFI clock
+ - description: PLL_E clock
+ - description: Optional CML clock
+
+ clock-names:
+ description: Names of clocks used by the PCIe controller
+ minItems: 3
+ items:
+ - const: pex
+ - const: afi
+ - const: pll_e
+ - const: cml
+
+ resets:
+ items:
+ - description: PCIe reset
+ - description: AFI reset
+ - description: PCIe-X reset
+
+ reset-names:
+ items:
+ - const: pex
+ - const: afi
+ - const: pcie_x
+
+ power-domains:
+ maxItems: 1
+
+ interconnects:
+ minItems: 1
+ maxItems: 2
+
+ interconnect-names:
+ items:
+ - const: dma-mem
+ - const: write
+
+ pinctrl-names:
+ items:
+ - const: default
+ - const: idle
+
+ pinctrl-0: true
+ pinctrl-1: true
+
+ operating-points-v2:
+ description:
+ Defines operating points with required frequency and voltage values,
+ and the opp-supported-hw property.
+
+ iommus:
+ maxItems: 1
+
+ avdd-pex-supply:
+ description: Power supply for analog PCIe logic. Must supply 1.05 V.
+
+ vdd-pex-supply:
+ description: Power supply for digital PCIe I/O. Must supply 1.05 V.
+
+ avdd-pex-pll-supply:
+ description: Power supply for dedicated (internal) PCIe PLL. Must supply 1.05 V.
+
+ avdd-plle-supply:
+ description: Power supply for PLLE, which is shared with SATA. Must supply 1.05 V.
+
+ vddio-pex-clk-supply:
+ description: Power supply for PCIe clock. Must supply 3.3 V.
+
+ vddio-pex-ctl-supply:
+ description: Power supply for PCIe control I/O partition. Must supply 1.8 V.
+
+ hvdd-pex-supply:
+ description: High-voltage supply for PCIe I/O and PCIe output clocks. Must supply 3.3 V.
+
+ avdd-pexa-supply:
+ description: Power supply for analog PCIe logic. Must supply 1.05 V.
+
+ vdd-pexa-supply:
+ description: Power supply for digital PCIe I/O. Must supply 1.05 V.
+
+ avdd-pexb-supply:
+ description: Power supply for analog PCIe logic. Must supply 1.05 V.
+
+ vdd-pexb-supply:
+ description: Power supply for digital PCIe I/O. Must supply 1.05 V.
+
+ avddio-pex-supply:
+ description: Power supply for analog PCIe logic. Must supply 1.05 V.
+
+ dvddio-pex-supply:
+ description: Power supply for digital PCIe I/O. Must supply 1.05 V.
+
+ hvddio-pex-supply:
+ description: High-voltage supply for PCIe I/O and PCIe output clocks. Must supply 1.8 V.
+
+ dvdd-pex-supply:
+ description: Power supply for digital PCIe I/O. Must supply 1.05 V.
+
+ hvdd-pex-pll-supply:
+ description: High-voltage supply for PLLE (shared with USB3). Must supply 1.8 V.
+
+ vddio-pexctl-aud-supply:
+ description: Power supply for PCIe side band signals. Must supply 1.8 V.
+
+patternProperties:
+ "^pci@[0-9a-f]+(,[0-9a-f]+)?$":
+ type: object
+ allOf:
+ - $ref: /schemas/pci/pci-pci-bridge.yaml#
+ properties:
+ reg:
+ maxItems: 1
+
+ nvidia,num-lanes:
+ description: Number of lanes used by this PCIe port
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [1, 2, 4]
+
+ phys:
+ description: Phandles to PCIe PHYs
+ items:
+ maxItems: 1
+ minItems: 1
+ maxItems: 4
+
+ phy-names:
+ description: Names of PCIe PHYs
+ items:
+ pattern: "^pcie(-[0-3])?$"
+ minItems: 1
+ maxItems: 4
+
+ required:
+ - nvidia,num-lanes
+
+ unevaluatedProperties: false
+
+allOf:
+ - $ref: /schemas/pci/pci-host-bridge.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - nvidia,tegra20-pcie
+ - nvidia,tegra186-pcie
+ then:
+ properties:
+ clocks:
+ maxItems: 3
+ clock-names:
+ items:
+ - const: pex
+ - const: afi
+ - const: pll_e
+ resets:
+ maxItems: 3
+ reset-names:
+ items:
+ - const: pex
+ - const: afi
+ - const: pcie_x
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - nvidia,tegra30-pcie
+ - nvidia,tegra124-pcie
+ - nvidia,tegra210-pcie
+ then:
+ properties:
+ clocks:
+ maxItems: 4
+ clock-names:
+ items:
+ - const: pex
+ - const: afi
+ - const: pll_e
+ - const: cml
+ resets:
+ maxItems: 3
+ reset-names:
+ items:
+ - const: pex
+ - const: afi
+ - const: pcie_x
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - nvidia,tegra20-pcie
+ - nvidia,tegra30-pcie
+ then:
+ required:
+ - power-domains
+ - operating-points-v2
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - nvidia,tegra186-pcie
+ then:
+ required:
+ - interconnects
+ - iommus
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - nvidia,tegra210-pcie
+ then:
+ required:
+ - pinctrl-names
+ - pinctrl-0
+ - pinctrl-1
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - nvidia,tegra20-pcie
+ then:
+ required:
+ - avdd-pex-supply
+ - vdd-pex-supply
+ - avdd-pex-pll-supply
+ - avdd-plle-supply
+ - vddio-pex-clk-supply
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - nvidia,tegra30-pcie
+ then:
+ required:
+ - avdd-pex-pll-supply
+ - avdd-plle-supply
+ - vddio-pex-ctl-supply
+ - hvdd-pex-supply
+ anyOf:
+ - required:
+ - avdd-pexa-supply
+ - vdd-pexa-supply
+ - required:
+ - avdd-pexb-supply
+ - vdd-pexb-supply
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - nvidia,tegra124-pcie
+ then:
+ required:
+ - avddio-pex-supply
+ - dvddio-pex-supply
+ - hvdd-pex-supply
+ - vddio-pex-ctl-supply
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - nvidia,tegra210-pcie
+ then:
+ required:
+ - hvddio-pex-supply
+ - dvddio-pex-supply
+ - vddio-pex-ctl-supply
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - nvidia,tegra186-pcie
+ then:
+ required:
+ - dvdd-pex-supply
+ - hvdd-pex-pll-supply
+ - hvdd-pex-supply
+ - vddio-pexctl-aud-supply
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+ - interrupts
+ - interrupt-map
+ - interrupt-map-mask
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ bus {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ pcie@80003000 {
+ compatible = "nvidia,tegra20-pcie";
+ device_type = "pci";
+ reg = <0x80003000 0x00000800>,
+ <0x80003800 0x00000200>,
+ <0x90000000 0x10000000>;
+ reg-names = "pads", "afi", "cs";
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "intr", "msi";
+ interrupt-parent = <&intc>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &intc GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+
+ bus-range = <0x00 0xff>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ranges = <0x02000000 0 0x80000000 0x80000000 0 0x00001000>,
+ <0x02000000 0 0x80001000 0x80001000 0 0x00001000>,
+ <0x01000000 0 0 0x82000000 0 0x00010000>,
+ <0x02000000 0 0xa0000000 0xa0000000 0 0x08000000>,
+ <0x42000000 0 0xa8000000 0xa8000000 0 0x18000000>;
+
+ clocks = <&tegra_car 70>,
+ <&tegra_car 72>,
+ <&tegra_car 118>;
+ clock-names = "pex", "afi", "pll_e";
+ resets = <&tegra_car 70>,
+ <&tegra_car 72>,
+ <&tegra_car 74>;
+ reset-names = "pex", "afi", "pcie_x";
+ power-domains = <&pd_core>;
+ operating-points-v2 = <&pcie_dvfs_opp_table>;
+
+ avdd-pex-supply = <®_pex_1v05>;
+ vdd-pex-supply = <®_pex_1v05>;
+ avdd-pex-pll-supply = <®_pexpll_1v05>;
+ avdd-plle-supply = <®_plle_1v05>;
+ vddio-pex-clk-supply = <®_pexclk_3v3>;
+
+ status = "okay";
+
+ pci@1,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0x80000000 0 0x1000>;
+ reg = <0x000800 0 0 0 0>;
+ bus-range = <0x00 0xff>;
+ status = "okay";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ nvidia,num-lanes = <2>;
+ };
+
+ pci@2,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82001000 0 0x80001000 0 0x1000>;
+ reg = <0x001000 0 0 0 0>;
+ bus-range = <0x00 0xff>;
+ status = "okay";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ nvidia,num-lanes = <2>;
+ };
+ };
+ };
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pcie@1003000 {
+ compatible = "nvidia,tegra210-pcie";
+ device_type = "pci";
+ reg = <0x0 0x01003000 0x0 0x00000800>,
+ <0x0 0x01003800 0x0 0x00000800>,
+ <0x0 0x02000000 0x0 0x10000000>;
+ reg-names = "pads", "afi", "cs";
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "intr", "msi";
+ interrupt-parent = <&gic>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+
+ bus-range = <0x00 0xff>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ranges = <0x02000000 0 0x01000000 0x0 0x01000000 0 0x00001000>,
+ <0x02000000 0 0x01001000 0x0 0x01001000 0 0x00001000>,
+ <0x01000000 0 0x0 0x0 0x12000000 0 0x00010000>,
+ <0x02000000 0 0x13000000 0x0 0x13000000 0 0x0d000000>,
+ <0x42000000 0 0x20000000 0x0 0x20000000 0 0x20000000>;
+
+ clocks = <&tegra_car 70>,
+ <&tegra_car 72>,
+ <&tegra_car 263>,
+ <&tegra_car 300>;
+ clock-names = "pex", "afi", "pll_e", "cml";
+ resets = <&tegra_car 70>,
+ <&tegra_car 72>,
+ <&tegra_car 74>;
+ reset-names = "pex", "afi", "pcie_x";
+
+ pinctrl-names = "default", "idle";
+ pinctrl-0 = <&pex_dpd_disable>;
+ pinctrl-1 = <&pex_dpd_enable>;
+
+ hvddio-pex-supply = <®_pex_1v8>;
+ dvddio-pex-supply = <®_pex_1v05>;
+ vddio-pex-ctl-supply = <®_pexctl_1v8>;
+
+ status = "okay";
+
+ pci@1,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0x01000000 0 0x1000>;
+ reg = <0x000800 0 0 0 0>;
+ bus-range = <0x00 0xff>;
+ status = "okay";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ nvidia,num-lanes = <4>;
+ };
+
+ pci@2,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82001000 0 0x01001000 0 0x1000>;
+ reg = <0x001000 0 0 0 0>;
+ bus-range = <0x00 0xff>;
+ status = "okay";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ nvidia,num-lanes = <1>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
deleted file mode 100644
index d099f3476ccc..000000000000
--- a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
+++ /dev/null
@@ -1,670 +0,0 @@
-NVIDIA Tegra PCIe controller
-
-Required properties:
-- compatible: Must be:
- - "nvidia,tegra20-pcie": for Tegra20
- - "nvidia,tegra30-pcie": for Tegra30
- - "nvidia,tegra124-pcie": for Tegra124 and Tegra132
- - "nvidia,tegra210-pcie": for Tegra210
- - "nvidia,tegra186-pcie": for Tegra186
-- power-domains: To ungate power partition by BPMP powergate driver. Must
- contain BPMP phandle and PCIe power partition ID. This is required only
- for Tegra186.
-- device_type: Must be "pci"
-- reg: A list of physical base address and length for each set of controller
- registers. Must contain an entry for each entry in the reg-names property.
-- reg-names: Must include the following entries:
- "pads": PADS registers
- "afi": AFI registers
- "cs": configuration space region
-- interrupts: A list of interrupt outputs of the controller. Must contain an
- entry for each entry in the interrupt-names property.
-- interrupt-names: Must include the following entries:
- "intr": The Tegra interrupt that is asserted for controller interrupts
- "msi": The Tegra interrupt that is asserted when an MSI is received
-- bus-range: Range of bus numbers associated with this controller
-- #address-cells: Address representation for root ports (must be 3)
- - cell 0 specifies the bus and device numbers of the root port:
- [23:16]: bus number
- [15:11]: device number
- - cell 1 denotes the upper 32 address bits and should be 0
- - cell 2 contains the lower 32 address bits and is used to translate to the
- CPU address space
-- #size-cells: Size representation for root ports (must be 2)
-- ranges: Describes the translation of addresses for root ports and standard
- PCI regions. The entries must be 6 cells each, where the first three cells
- correspond to the address as described for the #address-cells property
- above, the fourth cell is the physical CPU address to translate to and the
- fifth and six cells are as described for the #size-cells property above.
- - The first two entries are expected to translate the addresses for the root
- port registers, which are referenced by the assigned-addresses property of
- the root port nodes (see below).
- - The remaining entries setup the mapping for the standard I/O, memory and
- prefetchable PCI regions. The first cell determines the type of region
- that is setup:
- - 0x81000000: I/O memory region
- - 0x82000000: non-prefetchable memory region
- - 0xc2000000: prefetchable memory region
- Please refer to the standard PCI bus binding document for a more detailed
- explanation.
-- #interrupt-cells: Size representation for interrupts (must be 1)
-- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties
- Please refer to the standard PCI bus binding document for a more detailed
- explanation.
-- clocks: Must contain an entry for each entry in clock-names.
- See ../clocks/clock-bindings.txt for details.
-- clock-names: Must include the following entries:
- - pex
- - afi
- - pll_e
- - cml (not required for Tegra20)
-- resets: Must contain an entry for each entry in reset-names.
- See ../reset/reset.txt for details.
-- reset-names: Must include the following entries:
- - pex
- - afi
- - pcie_x
-
-Optional properties:
-- pinctrl-names: A list of pinctrl state names. Must contain the following
- entries:
- - "default": active state, puts PCIe I/O out of deep power down state
- - "idle": puts PCIe I/O into deep power down state
-- pinctrl-0: phandle for the default/active state of pin configurations.
-- pinctrl-1: phandle for the idle state of pin configurations.
-
-Required properties on Tegra124 and later (deprecated):
-- phys: Must contain an entry for each entry in phy-names.
-- phy-names: Must include the following entries:
- - pcie
-
-These properties are deprecated in favour of per-lane PHYs define in each of
-the root ports (see below).
-
-Power supplies for Tegra20:
-- avdd-pex-supply: Power supply for analog PCIe logic. Must supply 1.05 V.
-- vdd-pex-supply: Power supply for digital PCIe I/O. Must supply 1.05 V.
-- avdd-pex-pll-supply: Power supply for dedicated (internal) PCIe PLL. Must
- supply 1.05 V.
-- avdd-plle-supply: Power supply for PLLE, which is shared with SATA. Must
- supply 1.05 V.
-- vddio-pex-clk-supply: Power supply for PCIe clock. Must supply 3.3 V.
-
-Power supplies for Tegra30:
-- Required:
- - avdd-pex-pll-supply: Power supply for dedicated (internal) PCIe PLL. Must
- supply 1.05 V.
- - avdd-plle-supply: Power supply for PLLE, which is shared with SATA. Must
- supply 1.05 V.
- - vddio-pex-ctl-supply: Power supply for PCIe control I/O partition. Must
- supply 1.8 V.
- - hvdd-pex-supply: High-voltage supply for PCIe I/O and PCIe output clocks.
- Must supply 3.3 V.
-- Optional:
- - If lanes 0 to 3 are used:
- - avdd-pexa-supply: Power supply for analog PCIe logic. Must supply 1.05 V.
- - vdd-pexa-supply: Power supply for digital PCIe I/O. Must supply 1.05 V.
- - If lanes 4 or 5 are used:
- - avdd-pexb-supply: Power supply for analog PCIe logic. Must supply 1.05 V.
- - vdd-pexb-supply: Power supply for digital PCIe I/O. Must supply 1.05 V.
-
-Power supplies for Tegra124:
-- Required:
- - avddio-pex-supply: Power supply for analog PCIe logic. Must supply 1.05 V.
- - dvddio-pex-supply: Power supply for digital PCIe I/O. Must supply 1.05 V.
- - hvdd-pex-supply: High-voltage supply for PCIe I/O and PCIe output clocks.
- Must supply 3.3 V.
- - vddio-pex-ctl-supply: Power supply for PCIe control I/O partition. Must
- supply 2.8-3.3 V.
-
-Power supplies for Tegra210:
-- Required:
- - hvddio-pex-supply: High-voltage supply for PCIe I/O and PCIe output
- clocks. Must supply 1.8 V.
- - dvddio-pex-supply: Power supply for digital PCIe I/O. Must supply 1.05 V.
- - vddio-pex-ctl-supply: Power supply for PCIe control I/O partition. Must
- supply 1.8 V.
-
-Power supplies for Tegra186:
-- Required:
- - dvdd-pex-supply: Power supply for digital PCIe I/O. Must supply 1.05 V.
- - hvdd-pex-pll-supply: High-voltage supply for PLLE (shared with USB3). Must
- supply 1.8 V.
- - hvdd-pex-supply: High-voltage supply for PCIe I/O and PCIe output clocks.
- Must supply 1.8 V.
- - vddio-pexctl-aud-supply: Power supply for PCIe side band signals. Must
- supply 1.8 V.
-
-Root ports are defined as subnodes of the PCIe controller node.
-
-Required properties:
-- device_type: Must be "pci"
-- assigned-addresses: Address and size of the port configuration registers
-- reg: PCI bus address of the root port
-- #address-cells: Must be 3
-- #size-cells: Must be 2
-- ranges: Sub-ranges distributed from the PCIe controller node. An empty
- property is sufficient.
-- nvidia,num-lanes: Number of lanes to use for this port. Valid combinations
- are:
- - Root port 0 uses 4 lanes, root port 1 is unused.
- - Both root ports use 2 lanes.
-
-Required properties for Tegra124 and later:
-- phys: Must contain an phandle to a PHY for each entry in phy-names.
-- phy-names: Must include an entry for each active lane. Note that the number
- of entries does not have to (though usually will) be equal to the specified
- number of lanes in the nvidia,num-lanes property. Entries are of the form
- "pcie-N": where N ranges from 0 to the value specified in nvidia,num-lanes.
-
-Examples:
-=========
-
-Tegra20:
---------
-
-SoC DTSI:
-
- pcie-controller@80003000 {
- compatible = "nvidia,tegra20-pcie";
- device_type = "pci";
- reg = <0x80003000 0x00000800 /* PADS registers */
- 0x80003800 0x00000200 /* AFI registers */
- 0x90000000 0x10000000>; /* configuration space */
- reg-names = "pads", "afi", "cs";
- interrupts = <0 98 0x04 /* controller interrupt */
- 0 99 0x04>; /* MSI interrupt */
- interrupt-names = "intr", "msi";
-
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &intc GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-
- bus-range = <0x00 0xff>;
- #address-cells = <3>;
- #size-cells = <2>;
-
- ranges = <0x82000000 0 0x80000000 0x80000000 0 0x00001000 /* port 0 registers */
- 0x82000000 0 0x80001000 0x80001000 0 0x00001000 /* port 1 registers */
- 0x81000000 0 0 0x82000000 0 0x00010000 /* downstream I/O */
- 0x82000000 0 0xa0000000 0xa0000000 0 0x10000000 /* non-prefetchable memory */
- 0xc2000000 0 0xb0000000 0xb0000000 0 0x10000000>; /* prefetchable memory */
-
- clocks = <&tegra_car 70>, <&tegra_car 72>, <&tegra_car 118>;
- clock-names = "pex", "afi", "pll_e";
- resets = <&tegra_car 70>, <&tegra_car 72>, <&tegra_car 74>;
- reset-names = "pex", "afi", "pcie_x";
- status = "disabled";
-
- pci@1,0 {
- device_type = "pci";
- assigned-addresses = <0x82000800 0 0x80000000 0 0x1000>;
- reg = <0x000800 0 0 0 0>;
- status = "disabled";
-
- #address-cells = <3>;
- #size-cells = <2>;
-
- ranges;
-
- nvidia,num-lanes = <2>;
- };
-
- pci@2,0 {
- device_type = "pci";
- assigned-addresses = <0x82001000 0 0x80001000 0 0x1000>;
- reg = <0x001000 0 0 0 0>;
- status = "disabled";
-
- #address-cells = <3>;
- #size-cells = <2>;
-
- ranges;
-
- nvidia,num-lanes = <2>;
- };
- };
-
-Board DTS:
-
- pcie-controller@80003000 {
- status = "okay";
-
- vdd-supply = <&pci_vdd_reg>;
- pex-clk-supply = <&pci_clk_reg>;
-
- /* root port 00:01.0 */
- pci@1,0 {
- status = "okay";
-
- /* bridge 01:00.0 (optional) */
- pci@0,0 {
- reg = <0x010000 0 0 0 0>;
-
- #address-cells = <3>;
- #size-cells = <2>;
-
- device_type = "pci";
-
- /* endpoint 02:00.0 */
- pci@0,0 {
- reg = <0x020000 0 0 0 0>;
- };
- };
- };
- };
-
-Note that devices on the PCI bus are dynamically discovered using PCI's bus
-enumeration and therefore don't need corresponding device nodes in DT. However
-if a device on the PCI bus provides a non-probeable bus such as I2C or SPI,
-device nodes need to be added in order to allow the bus' children to be
-instantiated at the proper location in the operating system's device tree (as
-illustrated by the optional nodes in the example above).
-
-Tegra30:
---------
-
-SoC DTSI:
-
- pcie-controller@3000 {
- compatible = "nvidia,tegra30-pcie";
- device_type = "pci";
- reg = <0x00003000 0x00000800 /* PADS registers */
- 0x00003800 0x00000200 /* AFI registers */
- 0x10000000 0x10000000>; /* configuration space */
- reg-names = "pads", "afi", "cs";
- interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH /* controller interrupt */
- GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
- interrupt-names = "intr", "msi";
-
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &intc GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-
- bus-range = <0x00 0xff>;
- #address-cells = <3>;
- #size-cells = <2>;
-
- ranges = <0x82000000 0 0x00000000 0x00000000 0 0x00001000 /* port 0 configuration space */
- 0x82000000 0 0x00001000 0x00001000 0 0x00001000 /* port 1 configuration space */
- 0x82000000 0 0x00004000 0x00004000 0 0x00001000 /* port 2 configuration space */
- 0x81000000 0 0 0x02000000 0 0x00010000 /* downstream I/O */
- 0x82000000 0 0x20000000 0x20000000 0 0x08000000 /* non-prefetchable memory */
- 0xc2000000 0 0x28000000 0x28000000 0 0x18000000>; /* prefetchable memory */
-
- clocks = <&tegra_car TEGRA30_CLK_PCIE>,
- <&tegra_car TEGRA30_CLK_AFI>,
- <&tegra_car TEGRA30_CLK_PLL_E>,
- <&tegra_car TEGRA30_CLK_CML0>;
- clock-names = "pex", "afi", "pll_e", "cml";
- resets = <&tegra_car 70>,
- <&tegra_car 72>,
- <&tegra_car 74>;
- reset-names = "pex", "afi", "pcie_x";
- status = "disabled";
-
- pci@1,0 {
- device_type = "pci";
- assigned-addresses = <0x82000800 0 0x00000000 0 0x1000>;
- reg = <0x000800 0 0 0 0>;
- status = "disabled";
-
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- nvidia,num-lanes = <2>;
- };
-
- pci@2,0 {
- device_type = "pci";
- assigned-addresses = <0x82001000 0 0x00001000 0 0x1000>;
- reg = <0x001000 0 0 0 0>;
- status = "disabled";
-
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- nvidia,num-lanes = <2>;
- };
-
- pci@3,0 {
- device_type = "pci";
- assigned-addresses = <0x82001800 0 0x00004000 0 0x1000>;
- reg = <0x001800 0 0 0 0>;
- status = "disabled";
-
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- nvidia,num-lanes = <2>;
- };
- };
-
-Board DTS:
-
- pcie-controller@3000 {
- status = "okay";
-
- avdd-pexa-supply = <&ldo1_reg>;
- vdd-pexa-supply = <&ldo1_reg>;
- avdd-pexb-supply = <&ldo1_reg>;
- vdd-pexb-supply = <&ldo1_reg>;
- avdd-pex-pll-supply = <&ldo1_reg>;
- avdd-plle-supply = <&ldo1_reg>;
- vddio-pex-ctl-supply = <&sys_3v3_reg>;
- hvdd-pex-supply = <&sys_3v3_pexs_reg>;
-
- pci@1,0 {
- status = "okay";
- };
-
- pci@3,0 {
- status = "okay";
- };
- };
-
-Tegra124:
----------
-
-SoC DTSI:
-
- pcie-controller@1003000 {
- compatible = "nvidia,tegra124-pcie";
- device_type = "pci";
- reg = <0x0 0x01003000 0x0 0x00000800 /* PADS registers */
- 0x0 0x01003800 0x0 0x00000800 /* AFI registers */
- 0x0 0x02000000 0x0 0x10000000>; /* configuration space */
- reg-names = "pads", "afi", "cs";
- interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
- <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
- interrupt-names = "intr", "msi";
-
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-
- bus-range = <0x00 0xff>;
- #address-cells = <3>;
- #size-cells = <2>;
-
- ranges = <0x82000000 0 0x01000000 0x0 0x01000000 0 0x00001000 /* port 0 configuration space */
- 0x82000000 0 0x01001000 0x0 0x01001000 0 0x00001000 /* port 1 configuration space */
- 0x81000000 0 0x0 0x0 0x12000000 0 0x00010000 /* downstream I/O (64 KiB) */
- 0x82000000 0 0x13000000 0x0 0x13000000 0 0x0d000000 /* non-prefetchable memory (208 MiB) */
- 0xc2000000 0 0x20000000 0x0 0x20000000 0 0x20000000>; /* prefetchable memory (512 MiB) */
-
- clocks = <&tegra_car TEGRA124_CLK_PCIE>,
- <&tegra_car TEGRA124_CLK_AFI>,
- <&tegra_car TEGRA124_CLK_PLL_E>,
- <&tegra_car TEGRA124_CLK_CML0>;
- clock-names = "pex", "afi", "pll_e", "cml";
- resets = <&tegra_car 70>,
- <&tegra_car 72>,
- <&tegra_car 74>;
- reset-names = "pex", "afi", "pcie_x";
- status = "disabled";
-
- pci@1,0 {
- device_type = "pci";
- assigned-addresses = <0x82000800 0 0x01000000 0 0x1000>;
- reg = <0x000800 0 0 0 0>;
- status = "disabled";
-
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- nvidia,num-lanes = <2>;
- };
-
- pci@2,0 {
- device_type = "pci";
- assigned-addresses = <0x82001000 0 0x01001000 0 0x1000>;
- reg = <0x001000 0 0 0 0>;
- status = "disabled";
-
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- nvidia,num-lanes = <1>;
- };
- };
-
-Board DTS:
-
- pcie-controller@1003000 {
- status = "okay";
-
- avddio-pex-supply = <&vdd_1v05_run>;
- dvddio-pex-supply = <&vdd_1v05_run>;
- avdd-pex-pll-supply = <&vdd_1v05_run>;
- hvdd-pex-supply = <&vdd_3v3_lp0>;
- hvdd-pex-pll-e-supply = <&vdd_3v3_lp0>;
- vddio-pex-ctl-supply = <&vdd_3v3_lp0>;
- avdd-pll-erefe-supply = <&avdd_1v05_run>;
-
- /* Mini PCIe */
- pci@1,0 {
- phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-4}>;
- phy-names = "pcie-0";
- status = "okay";
- };
-
- /* Gigabit Ethernet */
- pci@2,0 {
- phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-2}>;
- phy-names = "pcie-0";
- status = "okay";
- };
- };
-
-Tegra210:
----------
-
-SoC DTSI:
-
- pcie-controller@1003000 {
- compatible = "nvidia,tegra210-pcie";
- device_type = "pci";
- reg = <0x0 0x01003000 0x0 0x00000800 /* PADS registers */
- 0x0 0x01003800 0x0 0x00000800 /* AFI registers */
- 0x0 0x02000000 0x0 0x10000000>; /* configuration space */
- reg-names = "pads", "afi", "cs";
- interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
- <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
- interrupt-names = "intr", "msi";
-
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-
- bus-range = <0x00 0xff>;
- #address-cells = <3>;
- #size-cells = <2>;
-
- ranges = <0x82000000 0 0x01000000 0x0 0x01000000 0 0x00001000 /* port 0 configuration space */
- 0x82000000 0 0x01001000 0x0 0x01001000 0 0x00001000 /* port 1 configuration space */
- 0x81000000 0 0x0 0x0 0x12000000 0 0x00010000 /* downstream I/O (64 KiB) */
- 0x82000000 0 0x13000000 0x0 0x13000000 0 0x0d000000 /* non-prefetchable memory (208 MiB) */
- 0xc2000000 0 0x20000000 0x0 0x20000000 0 0x20000000>; /* prefetchable memory (512 MiB) */
-
- clocks = <&tegra_car TEGRA210_CLK_PCIE>,
- <&tegra_car TEGRA210_CLK_AFI>,
- <&tegra_car TEGRA210_CLK_PLL_E>,
- <&tegra_car TEGRA210_CLK_CML0>;
- clock-names = "pex", "afi", "pll_e", "cml";
- resets = <&tegra_car 70>,
- <&tegra_car 72>,
- <&tegra_car 74>;
- reset-names = "pex", "afi", "pcie_x";
- status = "disabled";
-
- pci@1,0 {
- device_type = "pci";
- assigned-addresses = <0x82000800 0 0x01000000 0 0x1000>;
- reg = <0x000800 0 0 0 0>;
- status = "disabled";
-
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- nvidia,num-lanes = <4>;
- };
-
- pci@2,0 {
- device_type = "pci";
- assigned-addresses = <0x82001000 0 0x01001000 0 0x1000>;
- reg = <0x001000 0 0 0 0>;
- status = "disabled";
-
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- nvidia,num-lanes = <1>;
- };
- };
-
-Board DTS:
-
- pcie-controller@1003000 {
- status = "okay";
-
- avdd-pll-uerefe-supply = <&avdd_1v05_pll>;
- hvddio-pex-supply = <&vdd_1v8>;
- dvddio-pex-supply = <&vdd_pex_1v05>;
- dvdd-pex-pll-supply = <&vdd_pex_1v05>;
- hvdd-pex-pll-e-supply = <&vdd_1v8>;
- vddio-pex-ctl-supply = <&vdd_1v8>;
-
- pci@1,0 {
- phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>,
- <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>,
- <&{/padctl@7009f000/pads/pcie/lanes/pcie-2}>,
- <&{/padctl@7009f000/pads/pcie/lanes/pcie-3}>;
- phy-names = "pcie-0", "pcie-1", "pcie-2", "pcie-3";
- status = "okay";
- };
-
- pci@2,0 {
- phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-4}>;
- phy-names = "pcie-0";
- status = "okay";
- };
- };
-
-Tegra186:
----------
-
-SoC DTSI:
-
- pcie@10003000 {
- compatible = "nvidia,tegra186-pcie";
- power-domains = <&bpmp TEGRA186_POWER_DOMAIN_PCX>;
- device_type = "pci";
- reg = <0x0 0x10003000 0x0 0x00000800 /* PADS registers */
- 0x0 0x10003800 0x0 0x00000800 /* AFI registers */
- 0x0 0x40000000 0x0 0x10000000>; /* configuration space */
- reg-names = "pads", "afi", "cs";
-
- interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
- <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
- interrupt-names = "intr", "msi";
-
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-
- bus-range = <0x00 0xff>;
- #address-cells = <3>;
- #size-cells = <2>;
-
- ranges = <0x82000000 0 0x10000000 0x0 0x10000000 0 0x00001000 /* port 0 configuration space */
- 0x82000000 0 0x10001000 0x0 0x10001000 0 0x00001000 /* port 1 configuration space */
- 0x82000000 0 0x10004000 0x0 0x10004000 0 0x00001000 /* port 2 configuration space */
- 0x81000000 0 0x0 0x0 0x50000000 0 0x00010000 /* downstream I/O (64 KiB) */
- 0x82000000 0 0x50100000 0x0 0x50100000 0 0x07F00000 /* non-prefetchable memory (127 MiB) */
- 0xc2000000 0 0x58000000 0x0 0x58000000 0 0x28000000>; /* prefetchable memory (640 MiB) */
-
- clocks = <&bpmp TEGRA186_CLK_AFI>,
- <&bpmp TEGRA186_CLK_PCIE>,
- <&bpmp TEGRA186_CLK_PLLE>;
- clock-names = "afi", "pex", "pll_e";
-
- resets = <&bpmp TEGRA186_RESET_AFI>,
- <&bpmp TEGRA186_RESET_PCIE>,
- <&bpmp TEGRA186_RESET_PCIEXCLK>;
- reset-names = "afi", "pex", "pcie_x";
-
- status = "disabled";
-
- pci@1,0 {
- device_type = "pci";
- assigned-addresses = <0x82000800 0 0x10000000 0 0x1000>;
- reg = <0x000800 0 0 0 0>;
- status = "disabled";
-
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- nvidia,num-lanes = <2>;
- };
-
- pci@2,0 {
- device_type = "pci";
- assigned-addresses = <0x82001000 0 0x10001000 0 0x1000>;
- reg = <0x001000 0 0 0 0>;
- status = "disabled";
-
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- nvidia,num-lanes = <1>;
- };
-
- pci@3,0 {
- device_type = "pci";
- assigned-addresses = <0x82001800 0 0x10004000 0 0x1000>;
- reg = <0x001800 0 0 0 0>;
- status = "disabled";
-
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- nvidia,num-lanes = <1>;
- };
- };
-
-Board DTS:
-
- pcie@10003000 {
- status = "okay";
-
- dvdd-pex-supply = <&vdd_pex>;
- hvdd-pex-pll-supply = <&vdd_1v8>;
- hvdd-pex-supply = <&vdd_1v8>;
- vddio-pexctl-aud-supply = <&vdd_1v8>;
-
- pci@1,0 {
- nvidia,num-lanes = <4>;
- status = "okay";
- };
-
- pci@2,0 {
- nvidia,num-lanes = <0>;
- status = "disabled";
- };
-
- pci@3,0 {
- nvidia,num-lanes = <1>;
- status = "disabled";
- };
- };
diff --git a/MAINTAINERS b/MAINTAINERS
index 55af015174a5..45584cc85401 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -20252,7 +20252,7 @@ M: Thierry Reding <thierry.reding@gmail.com>
L: linux-tegra@vger.kernel.org
L: linux-pci@vger.kernel.org
S: Supported
-F: Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
+F: Documentation/devicetree/bindings/pci/nvidia,tegra-pcie.yaml
F: drivers/pci/controller/pci-tegra.c
PCI DRIVER FOR NXP LAYERSCAPE GEN4 CONTROLLER
--
2.50.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* Re: [PATCH v3 1/5] dt-bindings: PCI: Convert nvidia,tegra-pcie to DT schema
2026-02-24 12:18 ` [PATCH v3 1/5] dt-bindings: PCI: Convert nvidia,tegra-pcie to DT schema Anand Moon
@ 2026-03-06 0:43 ` Rob Herring
2026-03-11 6:46 ` Anand Moon
0 siblings, 1 reply; 10+ messages in thread
From: Rob Herring @ 2026-03-06 0:43 UTC (permalink / raw)
To: Anand Moon
Cc: Thierry Reding, Bjorn Helgaas, Lorenzo Pieralisi,
Krzysztof Wilczyński, Manivannan Sadhasivam,
Krzysztof Kozlowski, Conor Dooley, Jonathan Hunter, Aaron Kling,
open list:PCI DRIVER FOR NVIDIA TEGRA,
open list:PCI DRIVER FOR NVIDIA TEGRA,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list
On Tue, Feb 24, 2026 at 05:48:57PM +0530, Anand Moon wrote:
> Convert the existing text-based DT bindings documentation for the
> NVIDIA Tegra PCIe host controller to a DT schema format.
I just reviewed the same thing from Thierry... This one looks a bit
better for overall structure (fewer if/then schemas), but I think misses
some things like deprecated supplies. Please resolve the differences
between the 2 and coordinate who is going to send the next version.
>
> Also update the MAINTAINERS file to reflect this change.
>
> Cc: Jon Hunter <jonathanh@nvidia.com>
> Signed-off-by: Anand Moon <linux.amoon@gmail.com>
> ---
> v3: Tried to address the issues Krzysztof pointed out.
> Added missing regulator binding as suggeested by Jon.
> v2: Tried to address the isssue Rob pointed
> [1] https://lkml.org/lkml/2025/9/26/704
> improve the $suject and commit message
> drop few examples only nvidia,tegra20-pcie and nvidia,tegra210-pcie
>
> $ make dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/pci/nvidia,tegra-pcie.yaml
> ---
> .../bindings/pci/nvidia,tegra-pcie.yaml | 528 ++++++++++++++
> .../bindings/pci/nvidia,tegra20-pcie.txt | 670 ------------------
> MAINTAINERS | 2 +-
> 3 files changed, 529 insertions(+), 671 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/pci/nvidia,tegra-pcie.yaml
> delete mode 100644 Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
>
> diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra-pcie.yaml b/Documentation/devicetree/bindings/pci/nvidia,tegra-pcie.yaml
> new file mode 100644
> index 000000000000..0675bec205e8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/nvidia,tegra-pcie.yaml
> @@ -0,0 +1,528 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pci/nvidia,tegra-pcie.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: NVIDIA Tegra PCIe Controller
> +
> +maintainers:
> + - Jon Hunter <jonathanh@nvidia.com>
> + - Thierry Reding <treding@nvidia.com>
> +
> +description:
> + PCIe controller found on NVIDIA Tegra SoCs which supports multiple
> + root ports and platform-specific clock, reset, and power supply
> + configurations.
> +
> +properties:
> + compatible:
> + enum:
> + - nvidia,tegra20-pcie
> + - nvidia,tegra30-pcie
> + - nvidia,tegra124-pcie
> + - nvidia,tegra210-pcie
> + - nvidia,tegra186-pcie
> +
> + reg:
> + items:
> + - description: PADS registers
> + - description: AFI registers
> + - description: Configuration space region
> +
> + reg-names:
> + items:
> + - const: pads
> + - const: afi
> + - const: cs
> +
> + interrupts:
> + items:
> + - description: Controller interrupt
> + - description: MSI interrupt
> +
> + interrupt-names:
> + items:
> + - const: intr
> + - const: msi
> +
> + clocks:
> + minItems: 3
> + items:
> + - description: PCIe clock
> + - description: AFI clock
> + - description: PLL_E clock
> + - description: Optional CML clock
> +
> + clock-names:
> + description: Names of clocks used by the PCIe controller
> + minItems: 3
> + items:
> + - const: pex
> + - const: afi
> + - const: pll_e
> + - const: cml
> +
> + resets:
> + items:
> + - description: PCIe reset
> + - description: AFI reset
> + - description: PCIe-X reset
> +
> + reset-names:
> + items:
> + - const: pex
> + - const: afi
> + - const: pcie_x
> +
> + power-domains:
> + maxItems: 1
> +
> + interconnects:
> + minItems: 1
> + maxItems: 2
> +
> + interconnect-names:
> + items:
> + - const: dma-mem
> + - const: write
> +
> + pinctrl-names:
> + items:
> + - const: default
> + - const: idle
> +
> + pinctrl-0: true
> + pinctrl-1: true
> +
> + operating-points-v2:
> + description:
> + Defines operating points with required frequency and voltage values,
> + and the opp-supported-hw property.
> +
> + iommus:
> + maxItems: 1
> +
> + avdd-pex-supply:
> + description: Power supply for analog PCIe logic. Must supply 1.05 V.
> +
> + vdd-pex-supply:
> + description: Power supply for digital PCIe I/O. Must supply 1.05 V.
> +
> + avdd-pex-pll-supply:
> + description: Power supply for dedicated (internal) PCIe PLL. Must supply 1.05 V.
> +
> + avdd-plle-supply:
> + description: Power supply for PLLE, which is shared with SATA. Must supply 1.05 V.
> +
> + vddio-pex-clk-supply:
> + description: Power supply for PCIe clock. Must supply 3.3 V.
> +
> + vddio-pex-ctl-supply:
> + description: Power supply for PCIe control I/O partition. Must supply 1.8 V.
> +
> + hvdd-pex-supply:
> + description: High-voltage supply for PCIe I/O and PCIe output clocks. Must supply 3.3 V.
> +
> + avdd-pexa-supply:
> + description: Power supply for analog PCIe logic. Must supply 1.05 V.
> +
> + vdd-pexa-supply:
> + description: Power supply for digital PCIe I/O. Must supply 1.05 V.
> +
> + avdd-pexb-supply:
> + description: Power supply for analog PCIe logic. Must supply 1.05 V.
> +
> + vdd-pexb-supply:
> + description: Power supply for digital PCIe I/O. Must supply 1.05 V.
> +
> + avddio-pex-supply:
> + description: Power supply for analog PCIe logic. Must supply 1.05 V.
> +
> + dvddio-pex-supply:
> + description: Power supply for digital PCIe I/O. Must supply 1.05 V.
> +
> + hvddio-pex-supply:
> + description: High-voltage supply for PCIe I/O and PCIe output clocks. Must supply 1.8 V.
> +
> + dvdd-pex-supply:
> + description: Power supply for digital PCIe I/O. Must supply 1.05 V.
> +
> + hvdd-pex-pll-supply:
> + description: High-voltage supply for PLLE (shared with USB3). Must supply 1.8 V.
> +
> + vddio-pexctl-aud-supply:
> + description: Power supply for PCIe side band signals. Must supply 1.8 V.
> +
> +patternProperties:
> + "^pci@[0-9a-f]+(,[0-9a-f]+)?$":
> + type: object
> + allOf:
Don't need allOf.
> + - $ref: /schemas/pci/pci-pci-bridge.yaml#
> + properties:
> + reg:
> + maxItems: 1
> +
> + nvidia,num-lanes:
> + description: Number of lanes used by this PCIe port
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [1, 2, 4]
> +
> + phys:
> + description: Phandles to PCIe PHYs
> + items:
> + maxItems: 1
How many cells a phy entry has depends on the provider which is outside
the scope of this binding.
> + minItems: 1
> + maxItems: 4
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v3 1/5] dt-bindings: PCI: Convert nvidia,tegra-pcie to DT schema
2026-03-06 0:43 ` Rob Herring
@ 2026-03-11 6:46 ` Anand Moon
2026-04-27 14:33 ` Rob Herring
0 siblings, 1 reply; 10+ messages in thread
From: Anand Moon @ 2026-03-11 6:46 UTC (permalink / raw)
To: Rob Herring
Cc: Thierry Reding, Bjorn Helgaas, Lorenzo Pieralisi,
Krzysztof Wilczyński, Manivannan Sadhasivam,
Krzysztof Kozlowski, Conor Dooley, Jonathan Hunter, Aaron Kling,
open list:PCI DRIVER FOR NVIDIA TEGRA,
open list:PCI DRIVER FOR NVIDIA TEGRA,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list
Hi Rob,
Thanks for your review comments. Sorry for the late reply.
On Fri, 6 Mar 2026 at 06:13, Rob Herring <robh@kernel.org> wrote:
>
> On Tue, Feb 24, 2026 at 05:48:57PM +0530, Anand Moon wrote:
> > Convert the existing text-based DT bindings documentation for the
> > NVIDIA Tegra PCIe host controller to a DT schema format.
>
> I just reviewed the same thing from Thierry... This one looks a bit
> better for overall structure (fewer if/then schemas), but I think misses
> some things like deprecated supplies. Please resolve the differences
> between the 2 and coordinate who is going to send the next version.
>
Ok, I checked this, but couldn't find the deprecated supplies.
The drive code maps SoC-supplied regulators to an array for the buck regulators.
[1] https://github.com/torvalds/linux/blob/master/drivers/pci/controller/pci-tegra.c#L1929-L2078
I will fix it if I need to.
> >
> > Also update the MAINTAINERS file to reflect this change.
> >
> > Cc: Jon Hunter <jonathanh@nvidia.com>
> > Signed-off-by: Anand Moon <linux.amoon@gmail.com>
> > ---
> > v3: Tried to address the issues Krzysztof pointed out.
> > Added missing regulator binding as suggeested by Jon.
> > v2: Tried to address the isssue Rob pointed
> > [1] https://lkml.org/lkml/2025/9/26/704
> > improve the $suject and commit message
> > drop few examples only nvidia,tegra20-pcie and nvidia,tegra210-pcie
> >
> > $ make dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/pci/nvidia,tegra-pcie.yaml
> > ---
> > .../bindings/pci/nvidia,tegra-pcie.yaml | 528 ++++++++++++++
> > .../bindings/pci/nvidia,tegra20-pcie.txt | 670 ------------------
> > MAINTAINERS | 2 +-
> > 3 files changed, 529 insertions(+), 671 deletions(-)
> > create mode 100644 Documentation/devicetree/bindings/pci/nvidia,tegra-pcie.yaml
> > delete mode 100644 Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
> >
> > diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra-pcie.yaml b/Documentation/devicetree/bindings/pci/nvidia,tegra-pcie.yaml
> > new file mode 100644
> > index 000000000000..0675bec205e8
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/pci/nvidia,tegra-pcie.yaml
> > @@ -0,0 +1,528 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/pci/nvidia,tegra-pcie.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: NVIDIA Tegra PCIe Controller
> > +
> > +maintainers:
> > + - Jon Hunter <jonathanh@nvidia.com>
> > + - Thierry Reding <treding@nvidia.com>
> > +
> > +description:
> > + PCIe controller found on NVIDIA Tegra SoCs which supports multiple
> > + root ports and platform-specific clock, reset, and power supply
> > + configurations.
> > +
> > +properties:
> > + compatible:
> > + enum:
> > + - nvidia,tegra20-pcie
> > + - nvidia,tegra30-pcie
> > + - nvidia,tegra124-pcie
> > + - nvidia,tegra210-pcie
> > + - nvidia,tegra186-pcie
> > +
> > + reg:
> > + items:
> > + - description: PADS registers
> > + - description: AFI registers
> > + - description: Configuration space region
> > +
> > + reg-names:
> > + items:
> > + - const: pads
> > + - const: afi
> > + - const: cs
> > +
> > + interrupts:
> > + items:
> > + - description: Controller interrupt
> > + - description: MSI interrupt
> > +
> > + interrupt-names:
> > + items:
> > + - const: intr
> > + - const: msi
> > +
> > + clocks:
> > + minItems: 3
> > + items:
> > + - description: PCIe clock
> > + - description: AFI clock
> > + - description: PLL_E clock
> > + - description: Optional CML clock
> > +
> > + clock-names:
> > + description: Names of clocks used by the PCIe controller
> > + minItems: 3
> > + items:
> > + - const: pex
> > + - const: afi
> > + - const: pll_e
> > + - const: cml
> > +
> > + resets:
> > + items:
> > + - description: PCIe reset
> > + - description: AFI reset
> > + - description: PCIe-X reset
> > +
> > + reset-names:
> > + items:
> > + - const: pex
> > + - const: afi
> > + - const: pcie_x
> > +
> > + power-domains:
> > + maxItems: 1
> > +
> > + interconnects:
> > + minItems: 1
> > + maxItems: 2
> > +
> > + interconnect-names:
> > + items:
> > + - const: dma-mem
> > + - const: write
> > +
> > + pinctrl-names:
> > + items:
> > + - const: default
> > + - const: idle
> > +
> > + pinctrl-0: true
> > + pinctrl-1: true
> > +
> > + operating-points-v2:
> > + description:
> > + Defines operating points with required frequency and voltage values,
> > + and the opp-supported-hw property.
> > +
> > + iommus:
> > + maxItems: 1
> > +
> > + avdd-pex-supply:
> > + description: Power supply for analog PCIe logic. Must supply 1.05 V.
> > +
> > + vdd-pex-supply:
> > + description: Power supply for digital PCIe I/O. Must supply 1.05 V.
> > +
> > + avdd-pex-pll-supply:
> > + description: Power supply for dedicated (internal) PCIe PLL. Must supply 1.05 V.
> > +
> > + avdd-plle-supply:
> > + description: Power supply for PLLE, which is shared with SATA. Must supply 1.05 V.
> > +
> > + vddio-pex-clk-supply:
> > + description: Power supply for PCIe clock. Must supply 3.3 V.
> > +
> > + vddio-pex-ctl-supply:
> > + description: Power supply for PCIe control I/O partition. Must supply 1.8 V.
> > +
> > + hvdd-pex-supply:
> > + description: High-voltage supply for PCIe I/O and PCIe output clocks. Must supply 3.3 V.
> > +
> > + avdd-pexa-supply:
> > + description: Power supply for analog PCIe logic. Must supply 1.05 V.
> > +
> > + vdd-pexa-supply:
> > + description: Power supply for digital PCIe I/O. Must supply 1.05 V.
> > +
> > + avdd-pexb-supply:
> > + description: Power supply for analog PCIe logic. Must supply 1.05 V.
> > +
> > + vdd-pexb-supply:
> > + description: Power supply for digital PCIe I/O. Must supply 1.05 V.
> > +
> > + avddio-pex-supply:
> > + description: Power supply for analog PCIe logic. Must supply 1.05 V.
> > +
> > + dvddio-pex-supply:
> > + description: Power supply for digital PCIe I/O. Must supply 1.05 V.
> > +
> > + hvddio-pex-supply:
> > + description: High-voltage supply for PCIe I/O and PCIe output clocks. Must supply 1.8 V.
> > +
> > + dvdd-pex-supply:
> > + description: Power supply for digital PCIe I/O. Must supply 1.05 V.
> > +
> > + hvdd-pex-pll-supply:
> > + description: High-voltage supply for PLLE (shared with USB3). Must supply 1.8 V.
> > +
> > + vddio-pexctl-aud-supply:
> > + description: Power supply for PCIe side band signals. Must supply 1.8 V.
> > +
> > +patternProperties:
> > + "^pci@[0-9a-f]+(,[0-9a-f]+)?$":
> > + type: object
> > + allOf:
>
> Don't need allOf.
Ok.
>
> > + - $ref: /schemas/pci/pci-pci-bridge.yaml#
> > + properties:
> > + reg:
> > + maxItems: 1
> > +
> > + nvidia,num-lanes:
> > + description: Number of lanes used by this PCIe port
> > + $ref: /schemas/types.yaml#/definitions/uint32
> > + enum: [1, 2, 4]
> > +
> > + phys:
> > + description: Phandles to PCIe PHYs
> > + items:
> > + maxItems: 1
>
> How many cells a phy entry has depends on the provider, which is outside
> the scope of this binding.
Ok, actually, phys and phys-name are not part of patternProperties.
phys and phy-name are required properties for Tegra124 and later.
[2] https://github.com/torvalds/linux/blob/master/Documentation/devicetree/bindings/pci/nvidia%2Ctegra20-pcie.txt#L153-L158
And the board's example is as follows.
[3] https://github.com/torvalds/linux/blob/master/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts#L11-L32
[4] https://github.com/torvalds/linux/blob/master/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts#L36-L63
>
> > + minItems: 1
> > + maxItems: 4
>
So I have modified the device tree binding as follows.
-----8<----------8<----------8<----------8<----------8<----------8<-----
$ git diff .
diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra-pcie.yaml
b/Documentation/devicetree/bindings/pci/nvidia,tegra-pcie.yaml
index 0675bec205e8..73af8d2895a8 100644
--- a/Documentation/devicetree/bindings/pci/nvidia,tegra-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/nvidia,tegra-pcie.yaml
@@ -103,6 +103,18 @@ properties:
iommus:
maxItems: 1
+ phys:
+ description: Phandles to PCIe PHYs
+ minItems: 1
+ maxItems: 4
+
+ phy-names:
+ description: Names of PCIe PHYs
+ items:
+ pattern: "^pcie(-[0-3])?$"
+ minItems: 1
+ maxItems: 4
+
avdd-pex-supply:
description: Power supply for analog PCIe logic. Must supply 1.05 V.
@@ -157,8 +169,8 @@ properties:
patternProperties:
"^pci@[0-9a-f]+(,[0-9a-f]+)?$":
type: object
- allOf:
- - $ref: /schemas/pci/pci-pci-bridge.yaml#
+ $ref: /schemas/pci/pci-pci-bridge.yaml#
+
properties:
reg:
maxItems: 1
@@ -168,20 +180,6 @@ patternProperties:
$ref: /schemas/types.yaml#/definitions/uint32
enum: [1, 2, 4]
- phys:
- description: Phandles to PCIe PHYs
- items:
- maxItems: 1
- minItems: 1
- maxItems: 4
-
- phy-names:
- description: Names of PCIe PHYs
- items:
- pattern: "^pcie(-[0-3])?$"
- minItems: 1
- maxItems: 4
-
required:
- nvidia,num-lanes
@@ -274,6 +272,33 @@ allOf:
- pinctrl-0
- pinctrl-1
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - nvidia,tegra124-pcie
+ - nvidia,tegra210-pcie
+ then:
+ required:
+ - phys
+ - phy-names
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - nvidia,tegra20-pcie
+ - nvidia,tegra30-pcie
+ - nvidia,tegra186-pcie
+ then:
+ properties:
+ phys:
+ deprecated: true
+ phy-names:
+ deprecated: true
+
- if:
properties:
compatible:
@@ -495,34 +520,19 @@ examples:
dvddio-pex-supply = <®_pex_1v05>;
vddio-pex-ctl-supply = <®_pexctl_1v8>;
- status = "okay";
-
pci@1,0 {
- device_type = "pci";
- assigned-addresses = <0x82000800 0 0x01000000 0 0x1000>;
- reg = <0x000800 0 0 0 0>;
- bus-range = <0x00 0xff>;
+ phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>,
+ <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>,
+ <&{/padctl@7009f000/pads/pcie/lanes/pcie-2}>,
+ <&{/padctl@7009f000/pads/pcie/lanes/pcie-3}>;
+ phy-names = "pcie-0", "pcie-1", "pcie-2", "pcie-3";
status = "okay";
-
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- nvidia,num-lanes = <4>;
};
pci@2,0 {
- device_type = "pci";
- assigned-addresses = <0x82001000 0 0x01001000 0 0x1000>;
- reg = <0x001000 0 0 0 0>;
- bus-range = <0x00 0xff>;
+ phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-4}>;
+ phy-names = "pcie-0";
status = "okay";
-
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- nvidia,num-lanes = <1>;
};
};
};
-----8<----------8<----------8<----------8<----------8<----------8<-----
But I am not able to resolve the build error
$ make -j$(nproc) dt_binding_check DT_SCHEMA_FILES=nvidia,tegra-pcie.yaml
DTC [C] Documentation/devicetree/bindings/pci/nvidia,tegra-pcie.example.dtb
Documentation/devicetree/bindings/pci/nvidia,tegra-pcie.example.dts:179.25-186.19:
Warning (unit_address_vs_reg): /example-1/bus/pcie@1003000/pci@1,0:
node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/pci/nvidia,tegra-pcie.example.dts:188.25-192.19:
Warning (unit_address_vs_reg): /example-1/bus/pcie@1003000/pci@2,0:
node has a unit name, but no reg or ranges property
FATAL ERROR: Can't generate fixup for reference to path
&{/padctl@7009f000/pads/pcie/lanes/pcie-0}
make[2]: *** [scripts/Makefile.dtbs:140:
Documentation/devicetree/bindings/pci/nvidia,tegra-pcie.example.dtb]
Error 1
make[1]: *** [/media/nvme0/mainline/linux-tegra-6.y-devel/Makefile:1597:
dt_binding_check] Error 2
make: *** [Makefile:248: __sub-make] Error 2
Thanks
-Anand
^ permalink raw reply related [flat|nested] 10+ messages in thread* Re: [PATCH v3 1/5] dt-bindings: PCI: Convert nvidia,tegra-pcie to DT schema
2026-03-11 6:46 ` Anand Moon
@ 2026-04-27 14:33 ` Rob Herring
0 siblings, 0 replies; 10+ messages in thread
From: Rob Herring @ 2026-04-27 14:33 UTC (permalink / raw)
To: Anand Moon
Cc: Thierry Reding, Bjorn Helgaas, Lorenzo Pieralisi,
Krzysztof Wilczyński, Manivannan Sadhasivam,
Krzysztof Kozlowski, Conor Dooley, Jonathan Hunter, Aaron Kling,
open list:PCI DRIVER FOR NVIDIA TEGRA,
open list:PCI DRIVER FOR NVIDIA TEGRA,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list
On Wed, Mar 11, 2026 at 1:46 AM Anand Moon <linux.amoon@gmail.com> wrote:
>
> Hi Rob,
>
> Thanks for your review comments. Sorry for the late reply.
>
> On Fri, 6 Mar 2026 at 06:13, Rob Herring <robh@kernel.org> wrote:
> >
> > On Tue, Feb 24, 2026 at 05:48:57PM +0530, Anand Moon wrote:
> > > Convert the existing text-based DT bindings documentation for the
> > > NVIDIA Tegra PCIe host controller to a DT schema format.
> >
> > I just reviewed the same thing from Thierry... This one looks a bit
> > better for overall structure (fewer if/then schemas), but I think misses
> > some things like deprecated supplies. Please resolve the differences
> > between the 2 and coordinate who is going to send the next version.
> >
> Ok, I checked this, but couldn't find the deprecated supplies.
>
> The drive code maps SoC-supplied regulators to an array for the buck regulators.
> [1] https://github.com/torvalds/linux/blob/master/drivers/pci/controller/pci-tegra.c#L1929-L2078
>
> I will fix it if I need to.
> > >
> > > Also update the MAINTAINERS file to reflect this change.
> > >
> > > Cc: Jon Hunter <jonathanh@nvidia.com>
> > > Signed-off-by: Anand Moon <linux.amoon@gmail.com>
> > > ---
> > > v3: Tried to address the issues Krzysztof pointed out.
> > > Added missing regulator binding as suggeested by Jon.
> > > v2: Tried to address the isssue Rob pointed
> > > [1] https://lkml.org/lkml/2025/9/26/704
> > > improve the $suject and commit message
> > > drop few examples only nvidia,tegra20-pcie and nvidia,tegra210-pcie
> > >
> > > $ make dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/pci/nvidia,tegra-pcie.yaml
> > > ---
> > > .../bindings/pci/nvidia,tegra-pcie.yaml | 528 ++++++++++++++
> > > .../bindings/pci/nvidia,tegra20-pcie.txt | 670 ------------------
> > > MAINTAINERS | 2 +-
> > > 3 files changed, 529 insertions(+), 671 deletions(-)
> > > create mode 100644 Documentation/devicetree/bindings/pci/nvidia,tegra-pcie.yaml
> > > delete mode 100644 Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
> > >
> > > diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra-pcie.yaml b/Documentation/devicetree/bindings/pci/nvidia,tegra-pcie.yaml
> > > new file mode 100644
> > > index 000000000000..0675bec205e8
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/pci/nvidia,tegra-pcie.yaml
> > > @@ -0,0 +1,528 @@
> > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/pci/nvidia,tegra-pcie.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: NVIDIA Tegra PCIe Controller
> > > +
> > > +maintainers:
> > > + - Jon Hunter <jonathanh@nvidia.com>
> > > + - Thierry Reding <treding@nvidia.com>
> > > +
> > > +description:
> > > + PCIe controller found on NVIDIA Tegra SoCs which supports multiple
> > > + root ports and platform-specific clock, reset, and power supply
> > > + configurations.
> > > +
> > > +properties:
> > > + compatible:
> > > + enum:
> > > + - nvidia,tegra20-pcie
> > > + - nvidia,tegra30-pcie
> > > + - nvidia,tegra124-pcie
> > > + - nvidia,tegra210-pcie
> > > + - nvidia,tegra186-pcie
> > > +
> > > + reg:
> > > + items:
> > > + - description: PADS registers
> > > + - description: AFI registers
> > > + - description: Configuration space region
> > > +
> > > + reg-names:
> > > + items:
> > > + - const: pads
> > > + - const: afi
> > > + - const: cs
> > > +
> > > + interrupts:
> > > + items:
> > > + - description: Controller interrupt
> > > + - description: MSI interrupt
> > > +
> > > + interrupt-names:
> > > + items:
> > > + - const: intr
> > > + - const: msi
> > > +
> > > + clocks:
> > > + minItems: 3
> > > + items:
> > > + - description: PCIe clock
> > > + - description: AFI clock
> > > + - description: PLL_E clock
> > > + - description: Optional CML clock
> > > +
> > > + clock-names:
> > > + description: Names of clocks used by the PCIe controller
> > > + minItems: 3
> > > + items:
> > > + - const: pex
> > > + - const: afi
> > > + - const: pll_e
> > > + - const: cml
> > > +
> > > + resets:
> > > + items:
> > > + - description: PCIe reset
> > > + - description: AFI reset
> > > + - description: PCIe-X reset
> > > +
> > > + reset-names:
> > > + items:
> > > + - const: pex
> > > + - const: afi
> > > + - const: pcie_x
> > > +
> > > + power-domains:
> > > + maxItems: 1
> > > +
> > > + interconnects:
> > > + minItems: 1
> > > + maxItems: 2
> > > +
> > > + interconnect-names:
> > > + items:
> > > + - const: dma-mem
> > > + - const: write
> > > +
> > > + pinctrl-names:
> > > + items:
> > > + - const: default
> > > + - const: idle
> > > +
> > > + pinctrl-0: true
> > > + pinctrl-1: true
> > > +
> > > + operating-points-v2:
> > > + description:
> > > + Defines operating points with required frequency and voltage values,
> > > + and the opp-supported-hw property.
> > > +
> > > + iommus:
> > > + maxItems: 1
> > > +
> > > + avdd-pex-supply:
> > > + description: Power supply for analog PCIe logic. Must supply 1.05 V.
> > > +
> > > + vdd-pex-supply:
> > > + description: Power supply for digital PCIe I/O. Must supply 1.05 V.
> > > +
> > > + avdd-pex-pll-supply:
> > > + description: Power supply for dedicated (internal) PCIe PLL. Must supply 1.05 V.
> > > +
> > > + avdd-plle-supply:
> > > + description: Power supply for PLLE, which is shared with SATA. Must supply 1.05 V.
> > > +
> > > + vddio-pex-clk-supply:
> > > + description: Power supply for PCIe clock. Must supply 3.3 V.
> > > +
> > > + vddio-pex-ctl-supply:
> > > + description: Power supply for PCIe control I/O partition. Must supply 1.8 V.
> > > +
> > > + hvdd-pex-supply:
> > > + description: High-voltage supply for PCIe I/O and PCIe output clocks. Must supply 3.3 V.
> > > +
> > > + avdd-pexa-supply:
> > > + description: Power supply for analog PCIe logic. Must supply 1.05 V.
> > > +
> > > + vdd-pexa-supply:
> > > + description: Power supply for digital PCIe I/O. Must supply 1.05 V.
> > > +
> > > + avdd-pexb-supply:
> > > + description: Power supply for analog PCIe logic. Must supply 1.05 V.
> > > +
> > > + vdd-pexb-supply:
> > > + description: Power supply for digital PCIe I/O. Must supply 1.05 V.
> > > +
> > > + avddio-pex-supply:
> > > + description: Power supply for analog PCIe logic. Must supply 1.05 V.
> > > +
> > > + dvddio-pex-supply:
> > > + description: Power supply for digital PCIe I/O. Must supply 1.05 V.
> > > +
> > > + hvddio-pex-supply:
> > > + description: High-voltage supply for PCIe I/O and PCIe output clocks. Must supply 1.8 V.
> > > +
> > > + dvdd-pex-supply:
> > > + description: Power supply for digital PCIe I/O. Must supply 1.05 V.
> > > +
> > > + hvdd-pex-pll-supply:
> > > + description: High-voltage supply for PLLE (shared with USB3). Must supply 1.8 V.
> > > +
> > > + vddio-pexctl-aud-supply:
> > > + description: Power supply for PCIe side band signals. Must supply 1.8 V.
> > > +
> > > +patternProperties:
> > > + "^pci@[0-9a-f]+(,[0-9a-f]+)?$":
> > > + type: object
> > > + allOf:
> >
> > Don't need allOf.
> Ok.
> >
> > > + - $ref: /schemas/pci/pci-pci-bridge.yaml#
> > > + properties:
> > > + reg:
> > > + maxItems: 1
> > > +
> > > + nvidia,num-lanes:
> > > + description: Number of lanes used by this PCIe port
> > > + $ref: /schemas/types.yaml#/definitions/uint32
> > > + enum: [1, 2, 4]
> > > +
> > > + phys:
> > > + description: Phandles to PCIe PHYs
> > > + items:
> > > + maxItems: 1
> >
> > How many cells a phy entry has depends on the provider, which is outside
> > the scope of this binding.
> Ok, actually, phys and phys-name are not part of patternProperties.
>
> phys and phy-name are required properties for Tegra124 and later.
>
> [2] https://github.com/torvalds/linux/blob/master/Documentation/devicetree/bindings/pci/nvidia%2Ctegra20-pcie.txt#L153-L158
>
> And the board's example is as follows.
>
> [3] https://github.com/torvalds/linux/blob/master/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts#L11-L32
>
> [4] https://github.com/torvalds/linux/blob/master/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts#L36-L63
> >
> > > + minItems: 1
> > > + maxItems: 4
> >
> So I have modified the device tree binding as follows.
> -----8<----------8<----------8<----------8<----------8<----------8<-----
>
> $ git diff .
> diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra-pcie.yaml
> b/Documentation/devicetree/bindings/pci/nvidia,tegra-pcie.yaml
> index 0675bec205e8..73af8d2895a8 100644
> --- a/Documentation/devicetree/bindings/pci/nvidia,tegra-pcie.yaml
> +++ b/Documentation/devicetree/bindings/pci/nvidia,tegra-pcie.yaml
> @@ -103,6 +103,18 @@ properties:
> iommus:
> maxItems: 1
>
> + phys:
> + description: Phandles to PCIe PHYs
> + minItems: 1
> + maxItems: 4
> +
> + phy-names:
> + description: Names of PCIe PHYs
> + items:
> + pattern: "^pcie(-[0-3])?$"
> + minItems: 1
> + maxItems: 4
> +
> avdd-pex-supply:
> description: Power supply for analog PCIe logic. Must supply 1.05 V.
>
> @@ -157,8 +169,8 @@ properties:
> patternProperties:
> "^pci@[0-9a-f]+(,[0-9a-f]+)?$":
> type: object
> - allOf:
> - - $ref: /schemas/pci/pci-pci-bridge.yaml#
> + $ref: /schemas/pci/pci-pci-bridge.yaml#
> +
> properties:
> reg:
> maxItems: 1
> @@ -168,20 +180,6 @@ patternProperties:
> $ref: /schemas/types.yaml#/definitions/uint32
> enum: [1, 2, 4]
>
> - phys:
> - description: Phandles to PCIe PHYs
> - items:
> - maxItems: 1
> - minItems: 1
> - maxItems: 4
> -
> - phy-names:
> - description: Names of PCIe PHYs
> - items:
> - pattern: "^pcie(-[0-3])?$"
> - minItems: 1
> - maxItems: 4
> -
> required:
> - nvidia,num-lanes
>
> @@ -274,6 +272,33 @@ allOf:
> - pinctrl-0
> - pinctrl-1
>
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - nvidia,tegra124-pcie
> + - nvidia,tegra210-pcie
> + then:
> + required:
> + - phys
> + - phy-names
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - nvidia,tegra20-pcie
> + - nvidia,tegra30-pcie
> + - nvidia,tegra186-pcie
> + then:
> + properties:
> + phys:
> + deprecated: true
> + phy-names:
> + deprecated: true
> +
> - if:
> properties:
> compatible:
> @@ -495,34 +520,19 @@ examples:
> dvddio-pex-supply = <®_pex_1v05>;
> vddio-pex-ctl-supply = <®_pexctl_1v8>;
>
> - status = "okay";
> -
> pci@1,0 {
> - device_type = "pci";
> - assigned-addresses = <0x82000800 0 0x01000000 0 0x1000>;
> - reg = <0x000800 0 0 0 0>;
> - bus-range = <0x00 0xff>;
> + phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>,
> + <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>,
> + <&{/padctl@7009f000/pads/pcie/lanes/pcie-2}>,
> + <&{/padctl@7009f000/pads/pcie/lanes/pcie-3}>;
> + phy-names = "pcie-0", "pcie-1", "pcie-2", "pcie-3";
> status = "okay";
> -
> - #address-cells = <3>;
> - #size-cells = <2>;
> - ranges;
> -
> - nvidia,num-lanes = <4>;
> };
>
> pci@2,0 {
> - device_type = "pci";
> - assigned-addresses = <0x82001000 0 0x01001000 0 0x1000>;
> - reg = <0x001000 0 0 0 0>;
> - bus-range = <0x00 0xff>;
> + phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-4}>;
> + phy-names = "pcie-0";
> status = "okay";
> -
> - #address-cells = <3>;
> - #size-cells = <2>;
> - ranges;
> -
> - nvidia,num-lanes = <1>;
> };
> };
> };
>
> -----8<----------8<----------8<----------8<----------8<----------8<-----
>
> But I am not able to resolve the build error
>
> $ make -j$(nproc) dt_binding_check DT_SCHEMA_FILES=nvidia,tegra-pcie.yaml
> DTC [C] Documentation/devicetree/bindings/pci/nvidia,tegra-pcie.example.dtb
> Documentation/devicetree/bindings/pci/nvidia,tegra-pcie.example.dts:179.25-186.19:
> Warning (unit_address_vs_reg): /example-1/bus/pcie@1003000/pci@1,0:
> node has a unit name, but no reg or ranges property
> Documentation/devicetree/bindings/pci/nvidia,tegra-pcie.example.dts:188.25-192.19:
> Warning (unit_address_vs_reg): /example-1/bus/pcie@1003000/pci@2,0:
> node has a unit name, but no reg or ranges property
PCI nodes have to have a 'reg' entry. Otherwise, how do we match a
node to a device?
> FATAL ERROR: Can't generate fixup for reference to path
> &{/padctl@7009f000/pads/pcie/lanes/pcie-0}
You can't use paths that don't exist. You can only use labels which
don't exist. The examples are built as overlays to allow that.
Rob
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v3 2/5] arm64: dts: tegra: tegra186-p2771: Fix invalid PCIe nvidia,num-lanes
2026-02-24 12:18 [PATCH v3 0/5] PCI: tegra: A couple of cleanups Anand Moon
2026-02-24 12:18 ` [PATCH v3 1/5] dt-bindings: PCI: Convert nvidia,tegra-pcie to DT schema Anand Moon
@ 2026-02-24 12:18 ` Anand Moon
2026-02-24 12:18 ` [PATCH v3 3/5] PCI: tegra: Simplify clock handling by using clk_bulk*() functions Anand Moon
` (3 subsequent siblings)
5 siblings, 0 replies; 10+ messages in thread
From: Anand Moon @ 2026-02-24 12:18 UTC (permalink / raw)
To: Thierry Reding, Bjorn Helgaas, Lorenzo Pieralisi,
Krzysztof Wilczyński, Manivannan Sadhasivam, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Jonathan Hunter, Aaron Kling,
open list:PCI DRIVER FOR NVIDIA TEGRA,
open list:PCI DRIVER FOR NVIDIA TEGRA,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list
Cc: Anand Moon
NVIDIA Tegra PCIe binding schema (nvidia,tegra-pcie.yaml) defines
nvidia,num-lanes with an enum of [1, 2, 4]. The value <0> for the
pci@2,0 node is invalid and causes a dtbs_check validation failure.
Update the lane count to <1> to comply with the binding constraints.
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
v3: new patch
http://devicetree.org/schemas/pci/nvidia,tegra-pcie.yaml
/media/nvme0/mainline/linux-tegra-6.y-devel/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dtb: pcie@10003000 (nvidia,tegra186-pcie): pci@2,0:nvidia,num-lanes: 0 is not one of [1, 2, 4]
from schema $id: http://devicetree.org/schemas/pci/nvidia,tegra-pcie.yaml
DTC [C] arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dtb
---
arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
index 8b3736cee323..b4c6bfb09ce2 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
@@ -2433,7 +2433,7 @@ pci@1,0 {
};
pci@2,0 {
- nvidia,num-lanes = <0>;
+ nvidia,num-lanes = <1>;
status = "disabled";
};
--
2.50.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH v3 3/5] PCI: tegra: Simplify clock handling by using clk_bulk*() functions
2026-02-24 12:18 [PATCH v3 0/5] PCI: tegra: A couple of cleanups Anand Moon
2026-02-24 12:18 ` [PATCH v3 1/5] dt-bindings: PCI: Convert nvidia,tegra-pcie to DT schema Anand Moon
2026-02-24 12:18 ` [PATCH v3 2/5] arm64: dts: tegra: tegra186-p2771: Fix invalid PCIe nvidia,num-lanes Anand Moon
@ 2026-02-24 12:18 ` Anand Moon
2026-02-24 12:19 ` [PATCH v3 4/5] PCI: tegra: Use readl_poll_timeout() for link status polling Anand Moon
` (2 subsequent siblings)
5 siblings, 0 replies; 10+ messages in thread
From: Anand Moon @ 2026-02-24 12:18 UTC (permalink / raw)
To: Thierry Reding, Bjorn Helgaas, Lorenzo Pieralisi,
Krzysztof Wilczyński, Manivannan Sadhasivam, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Jonathan Hunter, Aaron Kling,
open list:PCI DRIVER FOR NVIDIA TEGRA,
open list:PCI DRIVER FOR NVIDIA TEGRA,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list
Cc: Anand Moon
Currently, the driver acquires clocks and prepare/enable/disable/unprepare
the clocks individually thereby making the driver complex to read.
The driver can be simplified by using the clk_bulk*() APIs.
Use:
- devm_clk_bulk_get_all() API to acquire all the clocks
- clk_bulk_prepare_enable() to prepare/enable clocks
- clk_bulk_disable_unprepare() APIs to disable/unprepare them in bulk
As part of this cleanup:
- Remove the legacy has_cml_clk flag
- Drop explicit handling of individual clocks (pex, afi, pll_e, cml)
- Rely on device tree ordering for clock sequencing, eliminating
hardcoded logic and improving readability and maintainability
This improves clarity, and makes future changes easier for maintainers.
Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
v3: None
v2: Switch back to devm_clk_bulk_get_all from devm_clk_bulk_get()
Mani - But you are converting it to .yaml, so you can safely
use devm_clk_bulk_get_all()
v1: Switch from devm_clk_bulk_get_all() -> devm_clk_bulk_get() with
fix clks array.
nvidia,tegra20-pcie and nvidia,tegra186-pcie uses three clocks
pex, afi, pll_e
where as nvidia,tegra30-pcie, nvidia,tegra124-pcie, nvidia,tegra210-pcie
uses four clks
pex, afi, pll_e, cml
---
drivers/pci/controller/pci-tegra.c | 71 +++++-------------------------
1 file changed, 12 insertions(+), 59 deletions(-)
diff --git a/drivers/pci/controller/pci-tegra.c b/drivers/pci/controller/pci-tegra.c
index 512309763d1f..32dc11d95cc9 100644
--- a/drivers/pci/controller/pci-tegra.c
+++ b/drivers/pci/controller/pci-tegra.c
@@ -298,7 +298,6 @@ struct tegra_pcie_soc {
bool has_pex_clkreq_en;
bool has_pex_bias_ctrl;
bool has_intr_prsnt_sense;
- bool has_cml_clk;
bool has_gen2;
bool force_pca_enable;
bool program_uphy;
@@ -331,10 +330,8 @@ struct tegra_pcie {
struct resource cs;
- struct clk *pex_clk;
- struct clk *afi_clk;
- struct clk *pll_e;
- struct clk *cml_clk;
+ struct clk_bulk_data *clks;
+ int num_clks;
struct reset_control *pex_rst;
struct reset_control *afi_rst;
@@ -1154,15 +1151,11 @@ static void tegra_pcie_enable_controller(struct tegra_pcie *pcie)
static void tegra_pcie_power_off(struct tegra_pcie *pcie)
{
struct device *dev = pcie->dev;
- const struct tegra_pcie_soc *soc = pcie->soc;
int err;
reset_control_assert(pcie->afi_rst);
- clk_disable_unprepare(pcie->pll_e);
- if (soc->has_cml_clk)
- clk_disable_unprepare(pcie->cml_clk);
- clk_disable_unprepare(pcie->afi_clk);
+ clk_bulk_disable_unprepare(pcie->num_clks, pcie->clks);
if (!dev->pm_domain)
tegra_powergate_power_off(TEGRA_POWERGATE_PCIE);
@@ -1175,7 +1168,6 @@ static void tegra_pcie_power_off(struct tegra_pcie *pcie)
static int tegra_pcie_power_on(struct tegra_pcie *pcie)
{
struct device *dev = pcie->dev;
- const struct tegra_pcie_soc *soc = pcie->soc;
int err;
reset_control_assert(pcie->pcie_xrst);
@@ -1203,35 +1195,16 @@ static int tegra_pcie_power_on(struct tegra_pcie *pcie)
}
}
- err = clk_prepare_enable(pcie->afi_clk);
+ err = clk_bulk_prepare_enable(pcie->num_clks, pcie->clks);
if (err < 0) {
- dev_err(dev, "failed to enable AFI clock: %d\n", err);
+ dev_err(dev, "filed to enable clocks: %d\n", err);
goto powergate;
}
- if (soc->has_cml_clk) {
- err = clk_prepare_enable(pcie->cml_clk);
- if (err < 0) {
- dev_err(dev, "failed to enable CML clock: %d\n", err);
- goto disable_afi_clk;
- }
- }
-
- err = clk_prepare_enable(pcie->pll_e);
- if (err < 0) {
- dev_err(dev, "failed to enable PLLE clock: %d\n", err);
- goto disable_cml_clk;
- }
-
reset_control_deassert(pcie->afi_rst);
return 0;
-disable_cml_clk:
- if (soc->has_cml_clk)
- clk_disable_unprepare(pcie->cml_clk);
-disable_afi_clk:
- clk_disable_unprepare(pcie->afi_clk);
powergate:
if (!dev->pm_domain)
tegra_powergate_power_off(TEGRA_POWERGATE_PCIE);
@@ -1255,25 +1228,11 @@ static void tegra_pcie_apply_pad_settings(struct tegra_pcie *pcie)
static int tegra_pcie_clocks_get(struct tegra_pcie *pcie)
{
struct device *dev = pcie->dev;
- const struct tegra_pcie_soc *soc = pcie->soc;
-
- pcie->pex_clk = devm_clk_get(dev, "pex");
- if (IS_ERR(pcie->pex_clk))
- return PTR_ERR(pcie->pex_clk);
- pcie->afi_clk = devm_clk_get(dev, "afi");
- if (IS_ERR(pcie->afi_clk))
- return PTR_ERR(pcie->afi_clk);
-
- pcie->pll_e = devm_clk_get(dev, "pll_e");
- if (IS_ERR(pcie->pll_e))
- return PTR_ERR(pcie->pll_e);
-
- if (soc->has_cml_clk) {
- pcie->cml_clk = devm_clk_get(dev, "cml");
- if (IS_ERR(pcie->cml_clk))
- return PTR_ERR(pcie->cml_clk);
- }
+ pcie->num_clks = devm_clk_bulk_get_all(dev, &pcie->clks);
+ if (pcie->num_clks < 0)
+ return dev_err_probe(dev, pcie->num_clks,
+ "failed to get clocks\n");
return 0;
}
@@ -2344,7 +2303,6 @@ static const struct tegra_pcie_soc tegra20_pcie = {
.has_pex_clkreq_en = false,
.has_pex_bias_ctrl = false,
.has_intr_prsnt_sense = false,
- .has_cml_clk = false,
.has_gen2 = false,
.force_pca_enable = false,
.program_uphy = true,
@@ -2373,7 +2331,6 @@ static const struct tegra_pcie_soc tegra30_pcie = {
.has_pex_clkreq_en = true,
.has_pex_bias_ctrl = true,
.has_intr_prsnt_sense = true,
- .has_cml_clk = true,
.has_gen2 = false,
.force_pca_enable = false,
.program_uphy = true,
@@ -2394,7 +2351,6 @@ static const struct tegra_pcie_soc tegra124_pcie = {
.has_pex_clkreq_en = true,
.has_pex_bias_ctrl = true,
.has_intr_prsnt_sense = true,
- .has_cml_clk = true,
.has_gen2 = true,
.force_pca_enable = false,
.program_uphy = true,
@@ -2417,7 +2373,6 @@ static const struct tegra_pcie_soc tegra210_pcie = {
.has_pex_clkreq_en = true,
.has_pex_bias_ctrl = true,
.has_intr_prsnt_sense = true,
- .has_cml_clk = true,
.has_gen2 = true,
.force_pca_enable = true,
.program_uphy = true,
@@ -2458,7 +2413,6 @@ static const struct tegra_pcie_soc tegra186_pcie = {
.has_pex_clkreq_en = true,
.has_pex_bias_ctrl = true,
.has_intr_prsnt_sense = true,
- .has_cml_clk = false,
.has_gen2 = true,
.force_pca_enable = false,
.program_uphy = false,
@@ -2642,7 +2596,7 @@ static int tegra_pcie_pm_suspend(struct device *dev)
}
reset_control_assert(pcie->pex_rst);
- clk_disable_unprepare(pcie->pex_clk);
+ clk_bulk_disable_unprepare(pcie->num_clks, pcie->clks);
if (IS_ENABLED(CONFIG_PCI_MSI))
tegra_pcie_disable_msi(pcie);
@@ -2676,9 +2630,9 @@ static int tegra_pcie_pm_resume(struct device *dev)
if (IS_ENABLED(CONFIG_PCI_MSI))
tegra_pcie_enable_msi(pcie);
- err = clk_prepare_enable(pcie->pex_clk);
+ err = clk_bulk_prepare_enable(pcie->num_clks, pcie->clks);
if (err) {
- dev_err(dev, "failed to enable PEX clock: %d\n", err);
+ dev_err(dev, "failed to enable clock: %d\n", err);
goto pex_dpd_enable;
}
@@ -2699,7 +2653,6 @@ static int tegra_pcie_pm_resume(struct device *dev)
disable_pex_clk:
reset_control_assert(pcie->pex_rst);
- clk_disable_unprepare(pcie->pex_clk);
pex_dpd_enable:
pinctrl_pm_select_idle_state(dev);
poweroff:
--
2.50.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH v3 4/5] PCI: tegra: Use readl_poll_timeout() for link status polling
2026-02-24 12:18 [PATCH v3 0/5] PCI: tegra: A couple of cleanups Anand Moon
` (2 preceding siblings ...)
2026-02-24 12:18 ` [PATCH v3 3/5] PCI: tegra: Simplify clock handling by using clk_bulk*() functions Anand Moon
@ 2026-02-24 12:19 ` Anand Moon
2026-02-24 12:19 ` [PATCH v3 5/5] PCI: tegra: Use BIT() and GENMASK() macros for register definitions Anand Moon
2026-03-05 6:12 ` [PATCH v3 0/5] PCI: tegra: A couple of cleanups Manivannan Sadhasivam
5 siblings, 0 replies; 10+ messages in thread
From: Anand Moon @ 2026-02-24 12:19 UTC (permalink / raw)
To: Thierry Reding, Bjorn Helgaas, Lorenzo Pieralisi,
Krzysztof Wilczyński, Manivannan Sadhasivam, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Jonathan Hunter, Aaron Kling,
open list:PCI DRIVER FOR NVIDIA TEGRA,
open list:PCI DRIVER FOR NVIDIA TEGRA,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list
Cc: Anand Moon
Replace the manual `do-while` polling loops with the readl_poll_timeout()
helper when checking the link DL_UP and DL_LINK_ACTIVE status bits
during link bring-up. This simplifies the code by removing the open-coded
timeout logic in favor of the standard, more robust iopoll framework.
The change improves readability and reduces code duplication.
Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
v3: None
v2: None
v1: dropped the include <linux/iopoll.h> header file.
---
drivers/pci/controller/pci-tegra.c | 37 +++++++++++-------------------
1 file changed, 14 insertions(+), 23 deletions(-)
diff --git a/drivers/pci/controller/pci-tegra.c b/drivers/pci/controller/pci-tegra.c
index 32dc11d95cc9..459a2bb1a065 100644
--- a/drivers/pci/controller/pci-tegra.c
+++ b/drivers/pci/controller/pci-tegra.c
@@ -2156,37 +2156,28 @@ static bool tegra_pcie_port_check_link(struct tegra_pcie_port *port)
value |= RP_PRIV_MISC_PRSNT_MAP_EP_PRSNT;
writel(value, port->base + RP_PRIV_MISC);
- do {
- unsigned int timeout = TEGRA_PCIE_LINKUP_TIMEOUT;
+ while (retries--) {
+ int err;
- do {
- value = readl(port->base + RP_VEND_XP);
-
- if (value & RP_VEND_XP_DL_UP)
- break;
-
- usleep_range(1000, 2000);
- } while (--timeout);
-
- if (!timeout) {
+ err = readl_poll_timeout(port->base + RP_VEND_XP, value,
+ value & RP_VEND_XP_DL_UP,
+ 1000,
+ TEGRA_PCIE_LINKUP_TIMEOUT * 1000);
+ if (err) {
dev_dbg(dev, "link %u down, retrying\n", port->index);
goto retry;
}
- timeout = TEGRA_PCIE_LINKUP_TIMEOUT;
-
- do {
- value = readl(port->base + RP_LINK_CONTROL_STATUS);
-
- if (value & RP_LINK_CONTROL_STATUS_DL_LINK_ACTIVE)
- return true;
-
- usleep_range(1000, 2000);
- } while (--timeout);
+ err = readl_poll_timeout(port->base + RP_LINK_CONTROL_STATUS,
+ value,
+ value & RP_LINK_CONTROL_STATUS_DL_LINK_ACTIVE,
+ 1000, TEGRA_PCIE_LINKUP_TIMEOUT * 1000);
+ if (!err)
+ return true;
retry:
tegra_pcie_port_reset(port);
- } while (--retries);
+ }
return false;
}
--
2.50.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH v3 5/5] PCI: tegra: Use BIT() and GENMASK() macros for register definitions
2026-02-24 12:18 [PATCH v3 0/5] PCI: tegra: A couple of cleanups Anand Moon
` (3 preceding siblings ...)
2026-02-24 12:19 ` [PATCH v3 4/5] PCI: tegra: Use readl_poll_timeout() for link status polling Anand Moon
@ 2026-02-24 12:19 ` Anand Moon
2026-03-05 6:12 ` [PATCH v3 0/5] PCI: tegra: A couple of cleanups Manivannan Sadhasivam
5 siblings, 0 replies; 10+ messages in thread
From: Anand Moon @ 2026-02-24 12:19 UTC (permalink / raw)
To: Thierry Reding, Bjorn Helgaas, Lorenzo Pieralisi,
Krzysztof Wilczyński, Manivannan Sadhasivam, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Jonathan Hunter, Aaron Kling,
open list:PCI DRIVER FOR NVIDIA TEGRA,
open list:PCI DRIVER FOR NVIDIA TEGRA,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list
Cc: Anand Moon
Replace manual bit operations with standard BIT() and GENMASK() macros.
This eliminates magic numbers, enhances readability, improves
maintainability, and resolves checkpatch.pl warnings.
Cc: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
v3: None
v2: improve the commit message
v1: New patch
---
drivers/pci/controller/pci-tegra.c | 129 +++++++++++++++--------------
1 file changed, 65 insertions(+), 64 deletions(-)
diff --git a/drivers/pci/controller/pci-tegra.c b/drivers/pci/controller/pci-tegra.c
index 459a2bb1a065..2c806404f572 100644
--- a/drivers/pci/controller/pci-tegra.c
+++ b/drivers/pci/controller/pci-tegra.c
@@ -13,6 +13,7 @@
* Author: Thierry Reding <treding@nvidia.com>
*/
+#include <linux/bitops.h>
#include <linux/clk.h>
#include <linux/cleanup.h>
#include <linux/debugfs.h>
@@ -85,17 +86,17 @@
#define AFI_MSI_EN_VEC(x) (0x8c + ((x) * 4))
#define AFI_CONFIGURATION 0xac
-#define AFI_CONFIGURATION_EN_FPCI (1 << 0)
-#define AFI_CONFIGURATION_CLKEN_OVERRIDE (1 << 31)
+#define AFI_CONFIGURATION_EN_FPCI BIT(0)
+#define AFI_CONFIGURATION_CLKEN_OVERRIDE BIT(31)
#define AFI_FPCI_ERROR_MASKS 0xb0
#define AFI_INTR_MASK 0xb4
-#define AFI_INTR_MASK_INT_MASK (1 << 0)
-#define AFI_INTR_MASK_MSI_MASK (1 << 8)
+#define AFI_INTR_MASK_INT_MASK BIT(0)
+#define AFI_INTR_MASK_MSI_MASK BIT(8)
#define AFI_INTR_CODE 0xb8
-#define AFI_INTR_CODE_MASK 0xf
+#define AFI_INTR_CODE_MASK GENMASK(3, 0)
#define AFI_INTR_INI_SLAVE_ERROR 1
#define AFI_INTR_INI_DECODE_ERROR 2
#define AFI_INTR_TARGET_ABORT 3
@@ -114,32 +115,32 @@
#define AFI_INTR_SIGNATURE 0xbc
#define AFI_UPPER_FPCI_ADDRESS 0xc0
#define AFI_SM_INTR_ENABLE 0xc4
-#define AFI_SM_INTR_INTA_ASSERT (1 << 0)
-#define AFI_SM_INTR_INTB_ASSERT (1 << 1)
-#define AFI_SM_INTR_INTC_ASSERT (1 << 2)
-#define AFI_SM_INTR_INTD_ASSERT (1 << 3)
-#define AFI_SM_INTR_INTA_DEASSERT (1 << 4)
-#define AFI_SM_INTR_INTB_DEASSERT (1 << 5)
-#define AFI_SM_INTR_INTC_DEASSERT (1 << 6)
-#define AFI_SM_INTR_INTD_DEASSERT (1 << 7)
+#define AFI_SM_INTR_INTA_ASSERT BIT(0)
+#define AFI_SM_INTR_INTB_ASSERT BIT(1)
+#define AFI_SM_INTR_INTC_ASSERT BIT(2)
+#define AFI_SM_INTR_INTD_ASSERT BIT(3)
+#define AFI_SM_INTR_INTA_DEASSERT BIT(4)
+#define AFI_SM_INTR_INTB_DEASSERT BIT(5)
+#define AFI_SM_INTR_INTC_DEASSERT BIT(6)
+#define AFI_SM_INTR_INTD_DEASSERT BIT(7)
#define AFI_AFI_INTR_ENABLE 0xc8
-#define AFI_INTR_EN_INI_SLVERR (1 << 0)
-#define AFI_INTR_EN_INI_DECERR (1 << 1)
-#define AFI_INTR_EN_TGT_SLVERR (1 << 2)
-#define AFI_INTR_EN_TGT_DECERR (1 << 3)
-#define AFI_INTR_EN_TGT_WRERR (1 << 4)
-#define AFI_INTR_EN_DFPCI_DECERR (1 << 5)
-#define AFI_INTR_EN_AXI_DECERR (1 << 6)
-#define AFI_INTR_EN_FPCI_TIMEOUT (1 << 7)
-#define AFI_INTR_EN_PRSNT_SENSE (1 << 8)
+#define AFI_INTR_EN_INI_SLVERR BIT(0)
+#define AFI_INTR_EN_INI_DECERR BIT(1)
+#define AFI_INTR_EN_TGT_SLVERR BIT(2)
+#define AFI_INTR_EN_TGT_DECERR BIT(3)
+#define AFI_INTR_EN_TGT_WRERR BIT(4)
+#define AFI_INTR_EN_DFPCI_DECERR BIT(5)
+#define AFI_INTR_EN_AXI_DECERR BIT(6)
+#define AFI_INTR_EN_FPCI_TIMEOUT BIT(7)
+#define AFI_INTR_EN_PRSNT_SENSE BIT(8)
#define AFI_PCIE_PME 0xf0
#define AFI_PCIE_CONFIG 0x0f8
-#define AFI_PCIE_CONFIG_PCIE_DISABLE(x) (1 << ((x) + 1))
-#define AFI_PCIE_CONFIG_PCIE_DISABLE_ALL 0xe
-#define AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_MASK (0xf << 20)
+#define AFI_PCIE_CONFIG_PCIE_DISABLE(x) BIT((x) + 1)
+#define AFI_PCIE_CONFIG_PCIE_DISABLE_ALL GENMASK(3, 1)
+#define AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_MASK GENMASK(23, 20)
#define AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_SINGLE (0x0 << 20)
#define AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_420 (0x0 << 20)
#define AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_X2_X1 (0x0 << 20)
@@ -150,79 +151,79 @@
#define AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_211 (0x1 << 20)
#define AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_411 (0x2 << 20)
#define AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_111 (0x2 << 20)
-#define AFI_PCIE_CONFIG_PCIE_CLKREQ_GPIO(x) (1 << ((x) + 29))
-#define AFI_PCIE_CONFIG_PCIE_CLKREQ_GPIO_ALL (0x7 << 29)
+#define AFI_PCIE_CONFIG_PCIE_CLKREQ_GPIO(x) BIT((x) + 29)
+#define AFI_PCIE_CONFIG_PCIE_CLKREQ_GPIO_ALL GENMASK(31, 29)
#define AFI_FUSE 0x104
-#define AFI_FUSE_PCIE_T0_GEN2_DIS (1 << 2)
+#define AFI_FUSE_PCIE_T0_GEN2_DIS BIT(2)
#define AFI_PEX0_CTRL 0x110
#define AFI_PEX1_CTRL 0x118
-#define AFI_PEX_CTRL_RST (1 << 0)
-#define AFI_PEX_CTRL_CLKREQ_EN (1 << 1)
-#define AFI_PEX_CTRL_REFCLK_EN (1 << 3)
-#define AFI_PEX_CTRL_OVERRIDE_EN (1 << 4)
+#define AFI_PEX_CTRL_RST BIT(0)
+#define AFI_PEX_CTRL_CLKREQ_EN BIT(1)
+#define AFI_PEX_CTRL_REFCLK_EN BIT(3)
+#define AFI_PEX_CTRL_OVERRIDE_EN BIT(4)
#define AFI_PLLE_CONTROL 0x160
-#define AFI_PLLE_CONTROL_BYPASS_PADS2PLLE_CONTROL (1 << 9)
-#define AFI_PLLE_CONTROL_PADS2PLLE_CONTROL_EN (1 << 1)
+#define AFI_PLLE_CONTROL_BYPASS_PADS2PLLE_CONTROL BIT(9)
+#define AFI_PLLE_CONTROL_PADS2PLLE_CONTROL_EN BIT(1)
#define AFI_PEXBIAS_CTRL_0 0x168
#define RP_ECTL_2_R1 0x00000e84
-#define RP_ECTL_2_R1_RX_CTLE_1C_MASK 0xffff
+#define RP_ECTL_2_R1_RX_CTLE_1C_MASK GENMASK(15, 0)
#define RP_ECTL_4_R1 0x00000e8c
-#define RP_ECTL_4_R1_RX_CDR_CTRL_1C_MASK (0xffff << 16)
+#define RP_ECTL_4_R1_RX_CDR_CTRL_1C_MASK GENMASK(31, 16)
#define RP_ECTL_4_R1_RX_CDR_CTRL_1C_SHIFT 16
#define RP_ECTL_5_R1 0x00000e90
-#define RP_ECTL_5_R1_RX_EQ_CTRL_L_1C_MASK 0xffffffff
+#define RP_ECTL_5_R1_RX_EQ_CTRL_L_1C_MASK GENMASK(31, 0)
#define RP_ECTL_6_R1 0x00000e94
-#define RP_ECTL_6_R1_RX_EQ_CTRL_H_1C_MASK 0xffffffff
+#define RP_ECTL_6_R1_RX_EQ_CTRL_H_1C_MASK GENMASK(31, 0)
#define RP_ECTL_2_R2 0x00000ea4
#define RP_ECTL_2_R2_RX_CTLE_1C_MASK 0xffff
#define RP_ECTL_4_R2 0x00000eac
-#define RP_ECTL_4_R2_RX_CDR_CTRL_1C_MASK (0xffff << 16)
+#define RP_ECTL_4_R2_RX_CDR_CTRL_1C_MASK GENMASK(31, 16)
#define RP_ECTL_4_R2_RX_CDR_CTRL_1C_SHIFT 16
#define RP_ECTL_5_R2 0x00000eb0
-#define RP_ECTL_5_R2_RX_EQ_CTRL_L_1C_MASK 0xffffffff
+#define RP_ECTL_5_R2_RX_EQ_CTRL_L_1C_MASK GENMASK(31, 0)
#define RP_ECTL_6_R2 0x00000eb4
-#define RP_ECTL_6_R2_RX_EQ_CTRL_H_1C_MASK 0xffffffff
+#define RP_ECTL_6_R2_RX_EQ_CTRL_H_1C_MASK GENMASK(31, 0)
#define RP_VEND_XP 0x00000f00
-#define RP_VEND_XP_DL_UP (1 << 30)
-#define RP_VEND_XP_OPPORTUNISTIC_ACK (1 << 27)
-#define RP_VEND_XP_OPPORTUNISTIC_UPDATEFC (1 << 28)
-#define RP_VEND_XP_UPDATE_FC_THRESHOLD_MASK (0xff << 18)
+#define RP_VEND_XP_DL_UP BIT(30)
+#define RP_VEND_XP_OPPORTUNISTIC_ACK BIT(27)
+#define RP_VEND_XP_OPPORTUNISTIC_UPDATEFC BIT(28)
+#define RP_VEND_XP_UPDATE_FC_THRESHOLD_MASK GENMASK(25, 18)
#define RP_VEND_CTL0 0x00000f44
-#define RP_VEND_CTL0_DSK_RST_PULSE_WIDTH_MASK (0xf << 12)
+#define RP_VEND_CTL0_DSK_RST_PULSE_WIDTH_MASK GENMASK(15, 12)
#define RP_VEND_CTL0_DSK_RST_PULSE_WIDTH (0x9 << 12)
#define RP_VEND_CTL1 0x00000f48
-#define RP_VEND_CTL1_ERPT (1 << 13)
+#define RP_VEND_CTL1_ERPT BIT(13)
#define RP_VEND_XP_BIST 0x00000f4c
-#define RP_VEND_XP_BIST_GOTO_L1_L2_AFTER_DLLP_DONE (1 << 28)
+#define RP_VEND_XP_BIST_GOTO_L1_L2_AFTER_DLLP_DONE BIT(28)
#define RP_VEND_CTL2 0x00000fa8
-#define RP_VEND_CTL2_PCA_ENABLE (1 << 7)
+#define RP_VEND_CTL2_PCA_ENABLE BIT(7)
#define RP_PRIV_MISC 0x00000fe0
-#define RP_PRIV_MISC_PRSNT_MAP_EP_PRSNT (0xe << 0)
-#define RP_PRIV_MISC_PRSNT_MAP_EP_ABSNT (0xf << 0)
-#define RP_PRIV_MISC_CTLR_CLK_CLAMP_THRESHOLD_MASK (0x7f << 16)
+#define RP_PRIV_MISC_PRSNT_MAP_EP_PRSNT GENMASK(3, 1)
+#define RP_PRIV_MISC_PRSNT_MAP_EP_ABSNT GENMASK(3, 0)
+#define RP_PRIV_MISC_CTLR_CLK_CLAMP_THRESHOLD_MASK GENMASK(22, 16)
#define RP_PRIV_MISC_CTLR_CLK_CLAMP_THRESHOLD (0xf << 16)
-#define RP_PRIV_MISC_CTLR_CLK_CLAMP_ENABLE (1 << 23)
-#define RP_PRIV_MISC_TMS_CLK_CLAMP_THRESHOLD_MASK (0x7f << 24)
+#define RP_PRIV_MISC_CTLR_CLK_CLAMP_ENABLE BIT(23)
+#define RP_PRIV_MISC_TMS_CLK_CLAMP_THRESHOLD_MASK GENMASK(30, 24)
#define RP_PRIV_MISC_TMS_CLK_CLAMP_THRESHOLD (0xf << 24)
-#define RP_PRIV_MISC_TMS_CLK_CLAMP_ENABLE (1 << 31)
+#define RP_PRIV_MISC_TMS_CLK_CLAMP_ENABLE BIT(31)
#define RP_LINK_CONTROL_STATUS 0x00000090
#define RP_LINK_CONTROL_STATUS_DL_LINK_ACTIVE 0x20000000
@@ -233,22 +234,22 @@
#define PADS_CTL_SEL 0x0000009c
#define PADS_CTL 0x000000a0
-#define PADS_CTL_IDDQ_1L (1 << 0)
-#define PADS_CTL_TX_DATA_EN_1L (1 << 6)
-#define PADS_CTL_RX_DATA_EN_1L (1 << 10)
+#define PADS_CTL_IDDQ_1L BIT(0)
+#define PADS_CTL_TX_DATA_EN_1L BIT(6)
+#define PADS_CTL_RX_DATA_EN_1L BIT(10)
#define PADS_PLL_CTL_TEGRA20 0x000000b8
#define PADS_PLL_CTL_TEGRA30 0x000000b4
-#define PADS_PLL_CTL_RST_B4SM (1 << 1)
-#define PADS_PLL_CTL_LOCKDET (1 << 8)
-#define PADS_PLL_CTL_REFCLK_MASK (0x3 << 16)
+#define PADS_PLL_CTL_RST_B4SM BIT(1)
+#define PADS_PLL_CTL_LOCKDET BIT(8)
+#define PADS_PLL_CTL_REFCLK_MASK GENMASK(17, 16)
#define PADS_PLL_CTL_REFCLK_INTERNAL_CML (0 << 16)
-#define PADS_PLL_CTL_REFCLK_INTERNAL_CMOS (1 << 16)
+#define PADS_PLL_CTL_REFCLK_INTERNAL_CMOS BIT(16)
#define PADS_PLL_CTL_REFCLK_EXTERNAL (2 << 16)
#define PADS_PLL_CTL_TXCLKREF_MASK (0x1 << 20)
#define PADS_PLL_CTL_TXCLKREF_DIV10 (0 << 20)
-#define PADS_PLL_CTL_TXCLKREF_DIV5 (1 << 20)
-#define PADS_PLL_CTL_TXCLKREF_BUF_EN (1 << 22)
+#define PADS_PLL_CTL_TXCLKREF_DIV5 BIT(20)
+#define PADS_PLL_CTL_TXCLKREF_BUF_EN BIT(22)
#define PADS_REFCLK_CFG0 0x000000c8
#define PADS_REFCLK_CFG1 0x000000cc
--
2.50.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* Re: [PATCH v3 0/5] PCI: tegra: A couple of cleanups
2026-02-24 12:18 [PATCH v3 0/5] PCI: tegra: A couple of cleanups Anand Moon
` (4 preceding siblings ...)
2026-02-24 12:19 ` [PATCH v3 5/5] PCI: tegra: Use BIT() and GENMASK() macros for register definitions Anand Moon
@ 2026-03-05 6:12 ` Manivannan Sadhasivam
5 siblings, 0 replies; 10+ messages in thread
From: Manivannan Sadhasivam @ 2026-03-05 6:12 UTC (permalink / raw)
To: Anand Moon
Cc: Thierry Reding, Bjorn Helgaas, Lorenzo Pieralisi,
Krzysztof Wilczyński, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Jonathan Hunter, Aaron Kling,
open list:PCI DRIVER FOR NVIDIA TEGRA,
open list:PCI DRIVER FOR NVIDIA TEGRA,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list
On Tue, Feb 24, 2026 at 05:48:56PM +0530, Anand Moon wrote:
> Hi All,
>
> This small series provides two cleanup patches for the Tegra PCIe driver.
> The overall goal is to replace custom, open-coded logic with standard
> kernel helper functions.
>
> These changes improve the driver's readability and maintainability by
> everaging modern, well-tested APIs for clock management and register
> polling.
>
> v3: Fix the DT binding for nvidia,tegra-pcie.yaml
> tried to address issue for Krzysztof and Jon.
> Added missing regulator and new patch to fix the device tree check.
> Added missing entry in MAINTAINERS.
>
> v2: Fix the DT binding for nvidia,tegra-pcie.yaml
> switch back to devm_clk_bulk_get_all to get all the clocks
> improve the commit message.
>
> v1 Added new devicetree binding nvidia,tegra-pcie.yaml file.
> Switch from devm_clk_bulk_get_all() -> devm_clk_bulk_get() api.
> Fixed checkpatch warnings.
>
> Tested on Jetson Nano 4 GB ram.
>
> jetson-nano:~$ lspci -tvv
> -[0000:00]-+-01.0-[01]----00.0 Intel Corporation Wireless 8265 / 8275
> \-02.0-[02]----00.0 Realtek Semiconductor Co., Ltd. RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet Controller
>
Given the history of this series, I want an Ack from Jon/Thierry or other Nvidia
folks for the driver patches.
- Mani
> v2: https://lore.kernel.org/linux-tegra/20251215141603.6749-1-linux.amoon@gmail.com/
> v1: https://lore.kernel.org/linux-tegra/20250926072905.126737-1-linux.amoon@gmail.com/
> RFC : https://lore.kernel.org/linux-tegra/20250831190055.7952-2-linux.amoon@gmail.com/
>
> Thanks
> -Anand
>
> Anand Moon (5):
> dt-bindings: PCI: Convert nvidia,tegra-pcie to DT schema
> arm64: dts: tegra: tegra186-p2771: Fix invalid PCIe nvidia,num-lanes
> PCI: tegra: Simplify clock handling by using clk_bulk*() functions
> PCI: tegra: Use readl_poll_timeout() for link status polling
> PCI: tegra: Use BIT() and GENMASK() macros for register definitions
>
> .../bindings/pci/nvidia,tegra-pcie.yaml | 528 ++++++++++++++
> .../bindings/pci/nvidia,tegra20-pcie.txt | 670 ------------------
> MAINTAINERS | 2 +-
> .../boot/dts/nvidia/tegra186-p2771-0000.dts | 2 +-
> drivers/pci/controller/pci-tegra.c | 237 +++----
> 5 files changed, 621 insertions(+), 818 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/pci/nvidia,tegra-pcie.yaml
> delete mode 100644 Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
>
>
> base-commit: 6de23f81a5e08be8fbf5e8d7e9febc72a5b5f27f
> --
> 2.50.1
>
--
மணிவண்ணன் சதாசிவம்
^ permalink raw reply [flat|nested] 10+ messages in thread