From: Vladimir Oltean <olteanv@gmail.com>
To: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
Cc: Andrew Lunn <andrew@lunn.ch>,
Alexandre Torgue <alexandre.torgue@foss.st.com>,
Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>,
linux-arm-kernel@lists.infradead.org,
linux-arm-msm@vger.kernel.org, linux-phy@lists.infradead.org,
linux-stm32@st-md-mailman.stormreply.com,
Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>,
Neil Armstrong <neil.armstrong@linaro.org>,
netdev@vger.kernel.org, Paolo Abeni <pabeni@redhat.com>,
Vinod Koul <vkoul@kernel.org>
Subject: Re: [PATCH RESEND2 net-next 7/8] phy: qcom-sgmii-eth: relax order of .power_on() vs .set_mode*()
Date: Fri, 27 Feb 2026 17:37:41 +0200 [thread overview]
Message-ID: <20260227153741.e462gzmv7t62r5uo@skbuf> (raw)
In-Reply-To: <E1vvkUS-0000000AuPh-3Il7@rmk-PC.armlinux.org.uk>
On Thu, Feb 26, 2026 at 11:09:52PM +0000, Russell King (Oracle) wrote:
> Allow any order of the .power_on() and .set_mode*() methods as per the
> recent discussion. This means phy_power_on() with this SerDes will now
> restore the previous setup without requiring a subsequent
> phy_set_mode*() call.
>
> Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
> ---
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
WARNING: multiple messages have this Message-ID (diff)
From: Vladimir Oltean <olteanv@gmail.com>
To: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
Cc: Andrew Lunn <andrew@lunn.ch>,
Alexandre Torgue <alexandre.torgue@foss.st.com>,
Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>,
linux-arm-kernel@lists.infradead.org,
linux-arm-msm@vger.kernel.org, linux-phy@lists.infradead.org,
linux-stm32@st-md-mailman.stormreply.com,
Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>,
Neil Armstrong <neil.armstrong@linaro.org>,
netdev@vger.kernel.org, Paolo Abeni <pabeni@redhat.com>,
Vinod Koul <vkoul@kernel.org>
Subject: Re: [PATCH RESEND2 net-next 7/8] phy: qcom-sgmii-eth: relax order of .power_on() vs .set_mode*()
Date: Fri, 27 Feb 2026 17:37:41 +0200 [thread overview]
Message-ID: <20260227153741.e462gzmv7t62r5uo@skbuf> (raw)
In-Reply-To: <E1vvkUS-0000000AuPh-3Il7@rmk-PC.armlinux.org.uk>
On Thu, Feb 26, 2026 at 11:09:52PM +0000, Russell King (Oracle) wrote:
> Allow any order of the .power_on() and .set_mode*() methods as per the
> recent discussion. This means phy_power_on() with this SerDes will now
> restore the previous setup without requiring a subsequent
> phy_set_mode*() call.
>
> Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
> ---
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
next prev parent reply other threads:[~2026-02-27 15:37 UTC|newest]
Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-26 23:07 [PATCH RESEND2 net-next 0/8] net: stmmac: qcom-ethqos: further serdes reorganisation Russell King (Oracle)
2026-02-26 23:07 ` Russell King (Oracle)
2026-02-26 23:09 ` [PATCH RESEND2 net-next 1/8] net: stmmac: qcom-ethqos: move ethqos_set_serdes_speed() Russell King (Oracle)
2026-02-26 23:09 ` Russell King (Oracle)
2026-02-26 23:09 ` [PATCH RESEND2 net-next 2/8] phy: qcom-sgmii-eth: add .set_mode() and .validate() methods Russell King (Oracle)
2026-02-26 23:09 ` Russell King (Oracle)
2026-02-26 23:09 ` [PATCH RESEND2 net-next 3/8] net: stmmac: qcom-ethqos: convert to use phy_set_mode_ext() Russell King (Oracle)
2026-02-26 23:09 ` Russell King (Oracle)
2026-02-26 23:09 ` [PATCH RESEND2 net-next 4/8] phy: qcom-sgmii-eth: remove .set_speed() implementation Russell King (Oracle)
2026-02-26 23:09 ` Russell King (Oracle)
2026-02-27 15:39 ` Vladimir Oltean
2026-02-27 15:39 ` Vladimir Oltean
2026-02-26 23:09 ` [PATCH RESEND2 net-next 5/8] phy: qcom-sgmii-eth: use PHY interface mode for SerDes settings Russell King (Oracle)
2026-02-26 23:09 ` Russell King (Oracle)
2026-02-27 15:40 ` Vladimir Oltean
2026-02-27 15:40 ` Vladimir Oltean
2026-02-26 23:09 ` [PATCH RESEND2 net-next 6/8] phy: qcom-sgmii-eth: remove qcom_dwmac_sgmii_phy_interface() Russell King (Oracle)
2026-02-26 23:09 ` Russell King (Oracle)
2026-02-27 15:42 ` Vladimir Oltean
2026-02-27 15:42 ` Vladimir Oltean
2026-02-26 23:09 ` [PATCH RESEND2 net-next 7/8] phy: qcom-sgmii-eth: relax order of .power_on() vs .set_mode*() Russell King (Oracle)
2026-02-26 23:09 ` Russell King (Oracle)
2026-02-27 15:37 ` Vladimir Oltean [this message]
2026-02-27 15:37 ` Vladimir Oltean
2026-02-26 23:09 ` [PATCH RESEND2 net-next 8/8] net: stmmac: qcom-ethqos: remove phy_set_mode_ext() after phy_power_on() Russell King (Oracle)
2026-02-26 23:09 ` Russell King (Oracle)
2026-02-27 15:31 ` Vladimir Oltean
2026-02-27 15:31 ` Vladimir Oltean
2026-02-27 1:26 ` [PATCH RESEND2 net-next 0/8] net: stmmac: qcom-ethqos: further serdes reorganisation Jakub Kicinski
2026-02-27 1:26 ` Jakub Kicinski
2026-02-27 15:48 ` Vladimir Oltean
2026-02-27 15:48 ` Vladimir Oltean
2026-02-28 0:11 ` Russell King (Oracle)
2026-02-28 0:11 ` Russell King (Oracle)
2026-02-28 0:55 ` Jakub Kicinski
2026-02-28 0:55 ` Jakub Kicinski
2026-02-28 16:31 ` Jakub Kicinski
2026-02-28 16:31 ` Jakub Kicinski
2026-03-01 0:14 ` Vladimir Oltean
2026-03-01 0:14 ` Vladimir Oltean
2026-03-01 0:32 ` Jakub Kicinski
2026-03-01 0:32 ` Jakub Kicinski
2026-03-01 12:08 ` Vladimir Oltean
2026-03-01 12:08 ` Vladimir Oltean
2026-03-02 23:29 ` Jakub Kicinski
2026-03-02 23:29 ` Jakub Kicinski
2026-03-01 13:42 ` Russell King (Oracle)
2026-03-01 13:42 ` Russell King (Oracle)
2026-03-01 14:10 ` Vladimir Oltean
2026-03-01 14:10 ` Vladimir Oltean
2026-03-01 13:39 ` Russell King (Oracle)
2026-03-01 13:39 ` Russell King (Oracle)
2026-03-02 23:57 ` Jakub Kicinski
2026-03-02 23:57 ` Jakub Kicinski
2026-03-09 15:44 ` Vladimir Oltean
2026-03-09 15:44 ` Vladimir Oltean
2026-03-09 23:51 ` Jakub Kicinski
2026-03-09 23:51 ` Jakub Kicinski
2026-03-03 0:00 ` patchwork-bot+netdevbpf
2026-03-03 0:00 ` patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260227153741.e462gzmv7t62r5uo@skbuf \
--to=olteanv@gmail.com \
--cc=alexandre.torgue@foss.st.com \
--cc=andrew+netdev@lunn.ch \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mohd.anwar@oss.qualcomm.com \
--cc=neil.armstrong@linaro.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=rmk+kernel@armlinux.org.uk \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.