From: Matthew Brost <matthew.brost@intel.com>
To: intel-xe@lists.freedesktop.org
Cc: stuart.summers@intel.com, arvind.yadav@intel.com,
himal.prasad.ghimiray@intel.com,
thomas.hellstrom@linux.intel.com, francois.dugast@intel.com
Subject: [PATCH v3 02/25] drm/xe: Add xe_migrate_update_pgtables_cpu_execute helper
Date: Fri, 27 Feb 2026 17:34:38 -0800 [thread overview]
Message-ID: <20260228013501.106680-3-matthew.brost@intel.com> (raw)
In-Reply-To: <20260228013501.106680-1-matthew.brost@intel.com>
Add the xe_migrate_update_pgtables_cpu_execute helper, which performs
the CPU-side page-table update. This will support implementing CPU
binds, as the submission backend can call this helper once a bind job’s
dependencies are resolved. While here, add assertions to provide basic
sanity checks on tht function arguments.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
---
drivers/gpu/drm/xe/xe_migrate.c | 58 ++++++++++++++++++++-------------
1 file changed, 35 insertions(+), 23 deletions(-)
diff --git a/drivers/gpu/drm/xe/xe_migrate.c b/drivers/gpu/drm/xe/xe_migrate.c
index f7e3a044bd78..69e6e3135ec6 100644
--- a/drivers/gpu/drm/xe/xe_migrate.c
+++ b/drivers/gpu/drm/xe/xe_migrate.c
@@ -1715,6 +1715,38 @@ struct migrate_test_params {
container_of(_priv, struct migrate_test_params, base)
#endif
+static void
+xe_migrate_update_pgtables_cpu_execute(struct xe_vm *vm, struct xe_tile *tile,
+ const struct xe_migrate_pt_update_ops *ops,
+ struct xe_vm_pgtable_update_op *pt_op,
+ int num_ops)
+{
+ u32 j, i;
+
+ for (j = 0; j < num_ops; ++j, ++pt_op) {
+ for (i = 0; i < pt_op->num_entries; i++) {
+ const struct xe_vm_pgtable_update *update =
+ &pt_op->entries[i];
+
+ xe_tile_assert(tile, update);
+ xe_tile_assert(tile, update->pt_bo);
+ xe_tile_assert(tile, !iosys_map_is_null(&update->pt_bo->vmap));
+
+ if (pt_op->bind)
+ ops->populate(tile, &update->pt_bo->vmap,
+ NULL, update->ofs, update->qwords,
+ update);
+ else
+ ops->clear(vm, tile, &update->pt_bo->vmap,
+ NULL, update->ofs, update->qwords,
+ update);
+ }
+ }
+
+ trace_xe_vm_cpu_bind(vm);
+ xe_device_wmb(vm->xe);
+}
+
static struct dma_fence *
xe_migrate_update_pgtables_cpu(struct xe_migrate *m,
struct xe_migrate_pt_update *pt_update)
@@ -1727,7 +1759,6 @@ xe_migrate_update_pgtables_cpu(struct xe_migrate *m,
struct xe_vm_pgtable_update_ops *pt_update_ops =
&pt_update->vops->pt_update_ops[pt_update->tile_id];
int err;
- u32 i, j;
if (XE_TEST_ONLY(test && test->force_gpu))
return ERR_PTR(-ETIME);
@@ -1739,28 +1770,9 @@ xe_migrate_update_pgtables_cpu(struct xe_migrate *m,
return ERR_PTR(err);
}
- for (i = 0; i < pt_update_ops->num_ops; ++i) {
- const struct xe_vm_pgtable_update_op *pt_op =
- &pt_update_ops->ops[i];
-
- for (j = 0; j < pt_op->num_entries; j++) {
- const struct xe_vm_pgtable_update *update =
- &pt_op->entries[j];
-
- if (pt_op->bind)
- ops->populate(m->tile,
- &update->pt_bo->vmap, NULL,
- update->ofs, update->qwords,
- update);
- else
- ops->clear(vm, m->tile,
- &update->pt_bo->vmap, NULL,
- update->ofs, update->qwords, update);
- }
- }
-
- trace_xe_vm_cpu_bind(vm);
- xe_device_wmb(vm->xe);
+ xe_migrate_update_pgtables_cpu_execute(vm, m->tile, ops,
+ pt_update_ops->ops,
+ pt_update_ops->num_ops);
return dma_fence_get_stub();
}
--
2.34.1
next prev parent reply other threads:[~2026-02-28 1:35 UTC|newest]
Thread overview: 63+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-28 1:34 [PATCH v3 00/25] CPU binds and ULLS on migration queue Matthew Brost
2026-02-28 1:34 ` [PATCH v3 01/25] drm/xe: Drop struct xe_migrate_pt_update argument from populate/clear vfuns Matthew Brost
2026-03-05 14:17 ` Francois Dugast
2026-02-28 1:34 ` Matthew Brost [this message]
2026-03-05 14:39 ` [PATCH v3 02/25] drm/xe: Add xe_migrate_update_pgtables_cpu_execute helper Francois Dugast
2026-02-28 1:34 ` [PATCH v3 03/25] drm/xe: Decouple exec queue idle check from LRC Matthew Brost
2026-03-02 20:50 ` Summers, Stuart
2026-03-02 21:02 ` Matthew Brost
2026-03-03 21:26 ` Summers, Stuart
2026-03-03 22:42 ` Matthew Brost
2026-03-03 22:54 ` Summers, Stuart
2026-02-28 1:34 ` [PATCH v3 04/25] drm/xe: Add job count to GuC exec queue snapshot Matthew Brost
2026-03-02 20:50 ` Summers, Stuart
2026-02-28 1:34 ` [PATCH v3 05/25] drm/xe: Update xe_bo_put_deferred arguments to include writeback flag Matthew Brost
2026-04-01 12:20 ` Francois Dugast
2026-04-01 22:39 ` Matthew Brost
2026-02-28 1:34 ` [PATCH v3 06/25] drm/xe: Add XE_BO_FLAG_PUT_VM_ASYNC Matthew Brost
2026-04-01 12:22 ` Francois Dugast
2026-04-01 22:38 ` Matthew Brost
2026-02-28 1:34 ` [PATCH v3 07/25] drm/xe: Update scheduler job layer to support PT jobs Matthew Brost
2026-03-03 22:50 ` Summers, Stuart
2026-03-03 23:00 ` Matthew Brost
2026-02-28 1:34 ` [PATCH v3 08/25] drm/xe: Add helpers to access PT ops Matthew Brost
2026-04-07 15:22 ` Francois Dugast
2026-02-28 1:34 ` [PATCH v3 09/25] drm/xe: Add struct xe_pt_job_ops Matthew Brost
2026-03-03 23:26 ` Summers, Stuart
2026-03-03 23:28 ` Matthew Brost
2026-02-28 1:34 ` [PATCH v3 10/25] drm/xe: Update GuC submission backend to run PT jobs Matthew Brost
2026-03-03 23:28 ` Summers, Stuart
2026-03-04 0:26 ` Matthew Brost
2026-03-04 20:43 ` Summers, Stuart
2026-03-04 21:53 ` Matthew Brost
2026-03-05 20:24 ` Summers, Stuart
2026-02-28 1:34 ` [PATCH v3 11/25] drm/xe: Store level in struct xe_vm_pgtable_update Matthew Brost
2026-03-03 23:44 ` Summers, Stuart
2026-02-28 1:34 ` [PATCH v3 12/25] drm/xe: Don't use migrate exec queue for page fault binds Matthew Brost
2026-02-28 1:34 ` [PATCH v3 13/25] drm/xe: Enable CPU binds for jobs Matthew Brost
2026-02-28 1:34 ` [PATCH v3 14/25] drm/xe: Remove unused arguments from xe_migrate_pt_update_ops Matthew Brost
2026-02-28 1:34 ` [PATCH v3 15/25] drm/xe: Make bind queues operate cross-tile Matthew Brost
2026-02-28 1:34 ` [PATCH v3 16/25] drm/xe: Add CPU bind layer Matthew Brost
2026-02-28 1:34 ` [PATCH v3 17/25] drm/xe: Add device flag to enable PT mirroring across tiles Matthew Brost
2026-02-28 1:34 ` [PATCH v3 18/25] drm/xe: Add xe_hw_engine_write_ring_tail Matthew Brost
2026-02-28 1:34 ` [PATCH v3 19/25] drm/xe: Add ULLS support to LRC Matthew Brost
2026-03-05 20:21 ` Francois Dugast
2026-02-28 1:34 ` [PATCH v3 20/25] drm/xe: Add ULLS migration job support to migration layer Matthew Brost
2026-03-05 23:34 ` Summers, Stuart
2026-03-09 23:11 ` Matthew Brost
2026-02-28 1:34 ` [PATCH v3 21/25] drm/xe: Add MI_SEMAPHORE_WAIT instruction defs Matthew Brost
2026-02-28 1:34 ` [PATCH v3 22/25] drm/xe: Add ULLS migration job support to ring ops Matthew Brost
2026-02-28 1:34 ` [PATCH v3 23/25] drm/xe: Add ULLS migration job support to GuC submission Matthew Brost
2026-02-28 1:35 ` [PATCH v3 24/25] drm/xe: Enter ULLS for migration jobs upon page fault or SVM prefetch Matthew Brost
2026-02-28 1:35 ` [PATCH v3 25/25] drm/xe: Add modparam to enable / disable ULLS on migrate queue Matthew Brost
2026-03-05 22:59 ` Summers, Stuart
2026-04-01 22:44 ` Matthew Brost
2026-02-28 1:43 ` ✗ CI.checkpatch: warning for CPU binds and ULLS on migration queue (rev3) Patchwork
2026-02-28 1:44 ` ✓ CI.KUnit: success " Patchwork
2026-02-28 2:32 ` ✓ Xe.CI.BAT: " Patchwork
2026-02-28 13:59 ` ✗ Xe.CI.FULL: failure " Patchwork
2026-03-02 17:54 ` Summers, Stuart
2026-03-02 18:13 ` Matthew Brost
2026-03-05 22:56 ` [PATCH v3 00/25] CPU binds and ULLS on migration queue Summers, Stuart
2026-03-10 22:17 ` Matthew Brost
2026-03-20 15:31 ` Thomas Hellström
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260228013501.106680-3-matthew.brost@intel.com \
--to=matthew.brost@intel.com \
--cc=arvind.yadav@intel.com \
--cc=francois.dugast@intel.com \
--cc=himal.prasad.ghimiray@intel.com \
--cc=intel-xe@lists.freedesktop.org \
--cc=stuart.summers@intel.com \
--cc=thomas.hellstrom@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.