From: jrossi@linux.ibm.com
To: qemu-devel@nongnu.org, qemu-s390x@nongnu.org, thuth@redhat.com,
mst@redhat.com
Cc: jjherne@linux.ibm.com, alifm@linux.ibm.com, farman@linux.ibm.com,
mjrosato@linux.ibm.com, jrossi@linux.ibm.com,
zycai@linux.ibm.com
Subject: [PATCH v5 05/15] pc-bios/s390-ccw: Store device type independent of sense data
Date: Sun, 8 Mar 2026 20:35:51 -0400 [thread overview]
Message-ID: <20260309003601.242634-6-jrossi@linux.ibm.com> (raw)
In-Reply-To: <20260309003601.242634-1-jrossi@linux.ibm.com>
From: Jared Rossi <jrossi@linux.ibm.com>
Store the device type (e.g. block) directly as an attribute of the VDev rather
than assume all devices can be identified by accessing CCW specific sense data.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
---
pc-bios/s390-ccw/main.c | 2 +-
pc-bios/s390-ccw/virtio-blkdev.c | 39 +++++++++++++++++++-------------
pc-bios/s390-ccw/virtio.c | 11 ++++++---
pc-bios/s390-ccw/virtio.h | 1 +
4 files changed, 33 insertions(+), 20 deletions(-)
diff --git a/pc-bios/s390-ccw/main.c b/pc-bios/s390-ccw/main.c
index 2e9261904f..64bde49710 100644
--- a/pc-bios/s390-ccw/main.c
+++ b/pc-bios/s390-ccw/main.c
@@ -251,7 +251,7 @@ static int virtio_setup(void)
vdev->is_cdrom = false;
int ret;
- switch (vdev->senseid.cu_model) {
+ switch (vdev->dev_type) {
case VIRTIO_ID_NET:
puts("Network boot device detected");
return 0;
diff --git a/pc-bios/s390-ccw/virtio-blkdev.c b/pc-bios/s390-ccw/virtio-blkdev.c
index 019c2718b1..9cc40e9108 100644
--- a/pc-bios/s390-ccw/virtio-blkdev.c
+++ b/pc-bios/s390-ccw/virtio-blkdev.c
@@ -53,14 +53,14 @@ int virtio_read_many(unsigned long sector, void *load_addr, int sec_num)
{
VDev *vdev = virtio_get_device();
- switch (vdev->senseid.cu_model) {
+ switch (vdev->dev_type) {
case VIRTIO_ID_BLOCK:
return virtio_blk_read_many(vdev, sector, load_addr, sec_num);
case VIRTIO_ID_SCSI:
return virtio_scsi_read_many(vdev, sector, load_addr, sec_num);
+ default:
+ return -1;
}
-
- return -1;
}
unsigned long virtio_load_direct(unsigned long rec_list1, unsigned long rec_list2,
@@ -119,7 +119,7 @@ void virtio_assume_iso9660(void)
{
VDev *vdev = virtio_get_device();
- switch (vdev->senseid.cu_model) {
+ switch (vdev->dev_type) {
case VIRTIO_ID_BLOCK:
vdev->guessed_disk_nature = VIRTIO_GDN_SCSI;
vdev->config.blk.blk_size = VIRTIO_ISO_BLOCK_SIZE;
@@ -129,6 +129,8 @@ void virtio_assume_iso9660(void)
case VIRTIO_ID_SCSI:
vdev->scsi_block_size = VIRTIO_ISO_BLOCK_SIZE;
break;
+ default:
+ return;
}
}
@@ -139,13 +141,15 @@ void virtio_assume_eckd(void)
vdev->guessed_disk_nature = VIRTIO_GDN_DASD;
vdev->blk_factor = 1;
vdev->config.blk.physical_block_exp = 0;
- switch (vdev->senseid.cu_model) {
+ switch (vdev->dev_type) {
case VIRTIO_ID_BLOCK:
vdev->config.blk.blk_size = VIRTIO_DASD_DEFAULT_BLOCK_SIZE;
break;
case VIRTIO_ID_SCSI:
vdev->config.blk.blk_size = vdev->scsi_block_size;
break;
+ default:
+ break;
}
vdev->config.blk.geometry.heads = 15;
vdev->config.blk.geometry.sectors =
@@ -162,50 +166,52 @@ bool virtio_ipl_disk_is_valid(void)
return true;
}
- return (vdev->senseid.cu_model == VIRTIO_ID_BLOCK ||
- vdev->senseid.cu_model == VIRTIO_ID_SCSI) &&
- blksize >= 512 && blksize <= 4096;
+ return (vdev->dev_type == VIRTIO_ID_BLOCK || vdev->dev_type == VIRTIO_ID_SCSI)
+ && blksize >= 512 && blksize <= 4096;
}
int virtio_get_block_size(void)
{
VDev *vdev = virtio_get_device();
- switch (vdev->senseid.cu_model) {
+ switch (vdev->dev_type) {
case VIRTIO_ID_BLOCK:
return vdev->config.blk.blk_size;
case VIRTIO_ID_SCSI:
return vdev->scsi_block_size;
+ default:
+ return 0;
}
- return 0;
}
uint8_t virtio_get_heads(void)
{
VDev *vdev = virtio_get_device();
- switch (vdev->senseid.cu_model) {
+ switch (vdev->dev_type) {
case VIRTIO_ID_BLOCK:
return vdev->config.blk.geometry.heads;
case VIRTIO_ID_SCSI:
return vdev->guessed_disk_nature == VIRTIO_GDN_DASD
? vdev->config.blk.geometry.heads : 255;
+ default:
+ return 0;
}
- return 0;
}
uint8_t virtio_get_sectors(void)
{
VDev *vdev = virtio_get_device();
- switch (vdev->senseid.cu_model) {
+ switch (vdev->dev_type) {
case VIRTIO_ID_BLOCK:
return vdev->config.blk.geometry.sectors;
case VIRTIO_ID_SCSI:
return vdev->guessed_disk_nature == VIRTIO_GDN_DASD
? vdev->config.blk.geometry.sectors : 63;
+ default:
+ return 0;
}
- return 0;
}
uint64_t virtio_get_blocks(void)
@@ -213,13 +219,14 @@ uint64_t virtio_get_blocks(void)
VDev *vdev = virtio_get_device();
const uint64_t factor = virtio_get_block_size() / VIRTIO_SECTOR_SIZE;
- switch (vdev->senseid.cu_model) {
+ switch (vdev->dev_type) {
case VIRTIO_ID_BLOCK:
return vdev->config.blk.capacity / factor;
case VIRTIO_ID_SCSI:
return vdev->scsi_last_block / factor;
+ default:
+ return 0;
}
- return 0;
}
int virtio_blk_setup_device(SubChannelId schid)
diff --git a/pc-bios/s390-ccw/virtio.c b/pc-bios/s390-ccw/virtio.c
index f384a990dc..5dd407d5c9 100644
--- a/pc-bios/s390-ccw/virtio.c
+++ b/pc-bios/s390-ccw/virtio.c
@@ -41,7 +41,7 @@ VDev *virtio_get_device(void)
VirtioDevType virtio_get_device_type(void)
{
- return vdev.senseid.cu_model;
+ return vdev.dev_type;
}
/* virtio spec v1.0 para 4.3.3.2 */
@@ -248,7 +248,7 @@ int virtio_setup_ccw(VDev *vdev)
return -EIO;
}
- switch (vdev->senseid.cu_model) {
+ switch (vdev->dev_type) {
case VIRTIO_ID_NET:
vdev->nr_vqs = 2;
vdev->cmd_vr_idx = 0;
@@ -346,12 +346,17 @@ bool virtio_is_supported(SubChannelId schid)
true)) {
return false;
}
+
+ vdev.dev_type = vdev.senseid.cu_model;
+
if (vdev.senseid.cu_type == 0x3832) {
- switch (vdev.senseid.cu_model) {
+ switch (vdev.dev_type) {
case VIRTIO_ID_BLOCK:
case VIRTIO_ID_SCSI:
case VIRTIO_ID_NET:
return true;
+ default:
+ return false;
}
}
return false;
diff --git a/pc-bios/s390-ccw/virtio.h b/pc-bios/s390-ccw/virtio.h
index 391d6ff2f7..39b507b221 100644
--- a/pc-bios/s390-ccw/virtio.h
+++ b/pc-bios/s390-ccw/virtio.h
@@ -239,6 +239,7 @@ struct VDev {
SubChannelId schid;
SenseId senseid;
S390IplType ipl_type;
+ VirtioDevType dev_type;
union {
VirtioBlkConfig blk;
VirtioScsiConfig scsi;
--
2.52.0
next prev parent reply other threads:[~2026-03-09 0:38 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-09 0:35 [PATCH v5 00/15] s390x: Add support for virtio-blk-pci IPL device jrossi
2026-03-09 0:35 ` [PATCH v5 01/15] pc-bios/s390-ccw: Fix misattributed function prototypes jrossi
2026-03-09 0:35 ` [PATCH v5 02/15] pc-bios/s390-ccw: Remove redundant vring schid attribute jrossi
2026-03-09 0:35 ` [PATCH v5 03/15] pc-bios/s390-ccw: Always reset virtio device on failed boot attempt jrossi
2026-03-09 0:35 ` [PATCH v5 04/15] s390x: Remove duplicate definitions of IPL types jrossi
2026-03-09 0:35 ` jrossi [this message]
2026-03-09 0:35 ` [PATCH v5 06/15] pc-bios/s390-ccw: Split virtio-ccw and generic virtio jrossi
2026-03-10 5:28 ` Thomas Huth
2026-03-09 0:35 ` [PATCH v5 07/15] include/hw/s390x: Move CLP definitions for easier BIOS access jrossi
2026-03-09 0:35 ` [PATCH v5 08/15] pc-bios/s390-ccw: Introduce CLP Architecture jrossi
2026-03-09 13:21 ` Matthew Rosato
2026-03-09 17:16 ` Farhan Ali
2026-03-09 0:35 ` [PATCH v5 09/15] s390x: Add definitions for PCI IPL type jrossi
2026-03-09 0:35 ` [PATCH v5 10/15] pc-bios/s390-ccw: Introduce PCI device jrossi
2026-03-09 11:56 ` Thomas Huth
2026-03-09 13:29 ` Matthew Rosato
2026-03-09 17:09 ` Farhan Ali
2026-03-09 0:35 ` [PATCH v5 11/15] pc-bios/s390-ccw: Introduce virtio-pci functions jrossi
2026-03-09 11:59 ` Thomas Huth
2026-03-09 13:53 ` Matthew Rosato
2026-03-09 22:27 ` Eric Farman
2026-03-09 0:35 ` [PATCH v5 12/15] pc-bios/s390-ccw: Add support for virtio-blk-pci IPL jrossi
2026-03-09 0:35 ` [PATCH v5 13/15] s390x: Build IPLB for virtio-pci devices jrossi
2026-03-09 0:36 ` [PATCH v5 14/15] hw: Add "loadparm" property to virtio block PCI devices booting on s390x jrossi
2026-03-09 0:36 ` [PATCH v5 15/15] tests/qtest: Add s390x PCI boot test to cdrom-test.c jrossi
2026-03-09 16:49 ` Thomas Huth
2026-03-09 16:53 ` Thomas Huth
2026-03-09 17:11 ` Thomas Huth
2026-03-09 18:01 ` Jared Rossi
2026-03-09 14:00 ` [PATCH v5 00/15] s390x: Add support for virtio-blk-pci IPL device Matthew Rosato
2026-03-09 15:40 ` Thomas Huth
2026-03-09 16:17 ` Matthew Rosato
2026-03-23 16:55 ` Thomas Huth
2026-03-24 17:59 ` Jared Rossi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260309003601.242634-6-jrossi@linux.ibm.com \
--to=jrossi@linux.ibm.com \
--cc=alifm@linux.ibm.com \
--cc=farman@linux.ibm.com \
--cc=jjherne@linux.ibm.com \
--cc=mjrosato@linux.ibm.com \
--cc=mst@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-s390x@nongnu.org \
--cc=thuth@redhat.com \
--cc=zycai@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.