From: Rob Herring <robh@kernel.org>
To: Akhila YS <akhilayalmati@gmail.com>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>,
Richard Weinberger <richard@nod.at>,
Vignesh Raghavendra <vigneshr@ti.com>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
linux-mtd@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH] dt-bindings: mtd: hisilicon,504-nfc: convert to DT schema
Date: Thu, 12 Mar 2026 10:28:51 -0500 [thread overview]
Message-ID: <20260312152851.GA3190071-robh@kernel.org> (raw)
In-Reply-To: <20260307-hisi504-1-v1-1-8bf9a186faf2@gmail.com>
On Sat, Mar 07, 2026 at 04:43:56PM +0000, Akhila YS wrote:
> Convert Hisilicon Hip04 Soc NAND controller DT binding to YAML format.
>
> Signed-off-by: Akhila YS <akhilayalmati@gmail.com>
> ---
> .../devicetree/bindings/mtd/hisilicon,504-nfc.yaml | 90 ++++++++++++++++++++++
> 1 file changed, 90 insertions(+)
Convert implies the removal of the .txt binding. Where is that? Could be
missing? If so, say that.
>
> diff --git a/Documentation/devicetree/bindings/mtd/hisilicon,504-nfc.yaml b/Documentation/devicetree/bindings/mtd/hisilicon,504-nfc.yaml
> new file mode 100644
> index 000000000000..805ef0af0e04
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mtd/hisilicon,504-nfc.yaml
> @@ -0,0 +1,90 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mtd/hisilicon,504-nfc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: HiSilicon Hip04 NAND Flash Controller
> +
> +maintainers:
> + - Miquel Raynal <miquel.raynal@bootlin.com>
> + - Richard Weinberger <richard@nod.at>
This should be someone with the h/w. I would use the HiSilicon
maintainer from MAINTAINERS.
> +
> +description:
> + The HiSilicon 504 NFC is a NAND flash memory controller used in the
> + Hip04 SoC. It supports hardware ECC for NAND devices and provides
> + register and buffer regions for NAND operations.
> +
> +allOf:
> + - $ref: nand-controller.yaml#
> +
> +properties:
> + compatible:
> + const: hisilicon,504-nfc
> +
> + reg:
> + minItems: 2
> + maxItems: 2
Need to define what each entry is.
> +
> + interrupts:
> + maxItems: 1
> +
> + nand-bus-width:
> + enum: [8, 16]
> +
> + nand-ecc-mode:
> + enum:
> + - none
> + - hw
> +
> + nand-ecc-strength:
> + const: 16
> +
> + nand-ecc-step-size:
> + const: 1024
> +
> + "#address-cells":
> + const: 1
> +
> + "#size-cells":
> + const: 0
These can be dropped as the child (partitions) doesn't have an address.
> +
> + partitions:
> + $ref: /schemas/mtd/partitions/fixed-partitions.yaml#
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - nand-bus-width
> + - nand-ecc-mode
> + - "#address-cells"
> + - "#size-cells"
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + nand-controller@4020000 {
> + compatible = "hisilicon,504-nfc";
> + reg = <0x04020000 0x10000>, <0x05000000 0x1000>;
> + interrupts = <0 379 4>;
> + nand-bus-width = <8>;
> + nand-ecc-mode = "hw";
> + nand-ecc-strength = <16>;
> + nand-ecc-step-size = <1024>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + partitions {
> + compatible = "fixed-partitions";
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + partition@0 {
> + label = "nand_text";
> + reg = <0x0 0x400000>;
> + };
> + };
> + };
> +...
>
> ---
> base-commit: d4906ae14a5f136ceb671bb14cedbf13fa560da6
> change-id: 20260306-hisi504-1-d7aa09c70d93
>
> Best regards,
> --
> Akhila YS <akhilayalmati@gmail.com>
>
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
WARNING: multiple messages have this Message-ID (diff)
From: Rob Herring <robh@kernel.org>
To: Akhila YS <akhilayalmati@gmail.com>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>,
Richard Weinberger <richard@nod.at>,
Vignesh Raghavendra <vigneshr@ti.com>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
linux-mtd@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH] dt-bindings: mtd: hisilicon,504-nfc: convert to DT schema
Date: Thu, 12 Mar 2026 10:28:51 -0500 [thread overview]
Message-ID: <20260312152851.GA3190071-robh@kernel.org> (raw)
In-Reply-To: <20260307-hisi504-1-v1-1-8bf9a186faf2@gmail.com>
On Sat, Mar 07, 2026 at 04:43:56PM +0000, Akhila YS wrote:
> Convert Hisilicon Hip04 Soc NAND controller DT binding to YAML format.
>
> Signed-off-by: Akhila YS <akhilayalmati@gmail.com>
> ---
> .../devicetree/bindings/mtd/hisilicon,504-nfc.yaml | 90 ++++++++++++++++++++++
> 1 file changed, 90 insertions(+)
Convert implies the removal of the .txt binding. Where is that? Could be
missing? If so, say that.
>
> diff --git a/Documentation/devicetree/bindings/mtd/hisilicon,504-nfc.yaml b/Documentation/devicetree/bindings/mtd/hisilicon,504-nfc.yaml
> new file mode 100644
> index 000000000000..805ef0af0e04
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mtd/hisilicon,504-nfc.yaml
> @@ -0,0 +1,90 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mtd/hisilicon,504-nfc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: HiSilicon Hip04 NAND Flash Controller
> +
> +maintainers:
> + - Miquel Raynal <miquel.raynal@bootlin.com>
> + - Richard Weinberger <richard@nod.at>
This should be someone with the h/w. I would use the HiSilicon
maintainer from MAINTAINERS.
> +
> +description:
> + The HiSilicon 504 NFC is a NAND flash memory controller used in the
> + Hip04 SoC. It supports hardware ECC for NAND devices and provides
> + register and buffer regions for NAND operations.
> +
> +allOf:
> + - $ref: nand-controller.yaml#
> +
> +properties:
> + compatible:
> + const: hisilicon,504-nfc
> +
> + reg:
> + minItems: 2
> + maxItems: 2
Need to define what each entry is.
> +
> + interrupts:
> + maxItems: 1
> +
> + nand-bus-width:
> + enum: [8, 16]
> +
> + nand-ecc-mode:
> + enum:
> + - none
> + - hw
> +
> + nand-ecc-strength:
> + const: 16
> +
> + nand-ecc-step-size:
> + const: 1024
> +
> + "#address-cells":
> + const: 1
> +
> + "#size-cells":
> + const: 0
These can be dropped as the child (partitions) doesn't have an address.
> +
> + partitions:
> + $ref: /schemas/mtd/partitions/fixed-partitions.yaml#
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - nand-bus-width
> + - nand-ecc-mode
> + - "#address-cells"
> + - "#size-cells"
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + nand-controller@4020000 {
> + compatible = "hisilicon,504-nfc";
> + reg = <0x04020000 0x10000>, <0x05000000 0x1000>;
> + interrupts = <0 379 4>;
> + nand-bus-width = <8>;
> + nand-ecc-mode = "hw";
> + nand-ecc-strength = <16>;
> + nand-ecc-step-size = <1024>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + partitions {
> + compatible = "fixed-partitions";
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + partition@0 {
> + label = "nand_text";
> + reg = <0x0 0x400000>;
> + };
> + };
> + };
> +...
>
> ---
> base-commit: d4906ae14a5f136ceb671bb14cedbf13fa560da6
> change-id: 20260306-hisi504-1-d7aa09c70d93
>
> Best regards,
> --
> Akhila YS <akhilayalmati@gmail.com>
>
next prev parent reply other threads:[~2026-03-12 15:29 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-07 16:43 [PATCH] dt-bindings: mtd: hisilicon,504-nfc: convert to DT schema Akhila YS
2026-03-07 16:43 ` Akhila YS
2026-03-12 15:28 ` Rob Herring [this message]
2026-03-12 15:28 ` Rob Herring
2026-03-13 6:18 ` Akhila YS
2026-03-13 6:18 ` Akhila YS
2026-03-13 8:55 ` Miquel Raynal
2026-03-13 8:55 ` Miquel Raynal
2026-03-13 8:57 ` Miquel Raynal
2026-03-13 8:57 ` Miquel Raynal
2026-03-13 11:55 ` Akhila YS
2026-03-13 11:55 ` Akhila YS
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260312152851.GA3190071-robh@kernel.org \
--to=robh@kernel.org \
--cc=akhilayalmati@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=miquel.raynal@bootlin.com \
--cc=richard@nod.at \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.