All of lore.kernel.org
 help / color / mirror / Atom feed
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Cc: "Niklas Söderlund" <niklas.soderlund@ragnatech.se>,
	"Mauro Carvalho Chehab" <mchehab@kernel.org>,
	"Sakari Ailus" <sakari.ailus@linux.intel.com>,
	linux-media@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	"Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>,
	"Mauro Carvalho Chehab" <mchehab+huawei@kernel.org>,
	"Jacopo Mondi" <jacopo.mondi@ideasonboard.com>
Subject: Re: [PATCH v5 02/10] media: rcar-isp: Move {enable|disable}_streams() calls
Date: Wed, 18 Mar 2026 22:44:42 +0200	[thread overview]
Message-ID: <20260318204442.GF716464@killaraus.ideasonboard.com> (raw)
In-Reply-To: <20260311-rcar-streams-v5-2-3e6c957d7567@ideasonboard.com>

On Wed, Mar 11, 2026 at 03:53:15PM +0200, Tomi Valkeinen wrote:
> With multiple streams the operation to enable the ISP hardware and to
> call {enable|disable}_streams() on upstream subdev will need to be
> handled separately.
> 
> Prepare for that by moving {enable|disable}_streams() calls out from
> risp_start() and risp_stop().
> 
> On Gen4, a side effect of this change is that if the sink side devices
> call .enable_streams() on rcar-isp multiple times, the second call will
> fail. This is because we always use stream ID 0, so the second call
> would attempt to enable the same stream again, leading to an error. In
> other words, a normal single-stream setup continues to work, but trying
> to use the current driver's custom VC based routing will fail.
> 
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>

Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

> ---
>  drivers/media/platform/renesas/rcar-isp/csisp.c | 27 ++++++++++++++++---------
>  1 file changed, 17 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/media/platform/renesas/rcar-isp/csisp.c b/drivers/media/platform/renesas/rcar-isp/csisp.c
> index 8fb2cc3b5650..58a9a3bd9f75 100644
> --- a/drivers/media/platform/renesas/rcar-isp/csisp.c
> +++ b/drivers/media/platform/renesas/rcar-isp/csisp.c
> @@ -268,18 +268,11 @@ static int risp_start(struct rcar_isp *isp, struct v4l2_subdev_state *state)
>  	/* Start ISP. */
>  	risp_write_cs(isp, ISPSTART_REG, ISPSTART_START);
>  
> -	ret = v4l2_subdev_enable_streams(isp->remote, isp->remote_pad,
> -					 BIT_ULL(0));
> -	if (ret)
> -		risp_power_off(isp);
> -
> -	return ret;
> +	return 0;
>  }
>  
>  static void risp_stop(struct rcar_isp *isp)
>  {
> -	v4l2_subdev_disable_streams(isp->remote, isp->remote_pad, BIT_ULL(0));
> -
>  	/* Stop ISP. */
>  	risp_write_cs(isp, ISPSTART_REG, ISPSTART_STOP);
>  
> @@ -291,7 +284,7 @@ static int risp_enable_streams(struct v4l2_subdev *sd,
>  			       u64 source_streams_mask)
>  {
>  	struct rcar_isp *isp = sd_to_isp(sd);
> -	int ret = 0;
> +	int ret;
>  
>  	if (source_streams_mask != 1)
>  		return -EINVAL;
> @@ -305,9 +298,17 @@ static int risp_enable_streams(struct v4l2_subdev *sd,
>  			return ret;
>  	}
>  
> +	ret = v4l2_subdev_enable_streams(isp->remote, isp->remote_pad,
> +					 BIT_ULL(0));
> +	if (ret) {
> +		if (isp->stream_count == 0)
> +			risp_stop(isp);
> +		return ret;
> +	}
> +
>  	isp->stream_count += 1;
>  
> -	return ret;
> +	return 0;
>  }
>  
>  static int risp_disable_streams(struct v4l2_subdev *sd,
> @@ -315,6 +316,7 @@ static int risp_disable_streams(struct v4l2_subdev *sd,
>  				u64 source_streams_mask)
>  {
>  	struct rcar_isp *isp = sd_to_isp(sd);
> +	int ret;
>  
>  	if (source_streams_mask != 1)
>  		return -EINVAL;
> @@ -322,6 +324,11 @@ static int risp_disable_streams(struct v4l2_subdev *sd,
>  	if (!isp->remote)
>  		return -ENODEV;
>  
> +	ret = v4l2_subdev_disable_streams(isp->remote, isp->remote_pad,
> +					  BIT_ULL(0));
> +	if (ret)
> +		return ret;
> +
>  	if (isp->stream_count == 1)
>  		risp_stop(isp);
>  
> 

-- 
Regards,

Laurent Pinchart

  reply	other threads:[~2026-03-18 20:44 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-03-11 13:53 [PATCH v5 00/10] media: rcar: Streams support Tomi Valkeinen
2026-03-11 13:53 ` [PATCH v5 01/10] media: rcar-vin: Link VINs on Gen3 to a single channel on each CSI-2 Tomi Valkeinen
2026-04-04 12:09   ` Niklas Söderlund
2026-03-11 13:53 ` [PATCH v5 02/10] media: rcar-isp: Move {enable|disable}_streams() calls Tomi Valkeinen
2026-03-18 20:44   ` Laurent Pinchart [this message]
2026-03-11 13:53 ` [PATCH v5 03/10] media: rcar-csi2: " Tomi Valkeinen
2026-03-18 20:54   ` Laurent Pinchart
2026-04-04 12:19     ` Niklas Söderlund
2026-06-16 12:35       ` Laurent Pinchart
2026-06-16 11:20     ` Tomi Valkeinen
2026-06-16 12:34       ` Laurent Pinchart
2026-06-16 14:04         ` Niklas Söderlund
2026-03-11 13:53 ` [PATCH v5 04/10] media: rcar-csi2: Switch to Streams API Tomi Valkeinen
2026-03-18 21:04   ` Laurent Pinchart
2026-06-16 11:22     ` Tomi Valkeinen
2026-06-16 12:27       ` Laurent Pinchart
2026-06-16 13:26         ` Tomi Valkeinen
2026-06-16 13:41           ` Laurent Pinchart
2026-03-11 13:53 ` [PATCH v5 05/10] media: rcar-isp: " Tomi Valkeinen
2026-03-18 21:12   ` Laurent Pinchart
2026-03-11 13:53 ` [PATCH v5 06/10] media: rcar-csi2: Add .get_frame_desc op Tomi Valkeinen
2026-03-18 21:16   ` Laurent Pinchart
2026-06-16 11:30     ` Tomi Valkeinen
2026-06-16 12:30       ` Laurent Pinchart
2026-06-16 13:12         ` Tomi Valkeinen
2026-06-16 13:21           ` Laurent Pinchart
2026-03-11 13:53 ` [PATCH v5 07/10] media: rcar-isp: Call get_frame_desc to find out VC & DT Tomi Valkeinen
2026-03-11 13:53 ` [PATCH v5 08/10] media: rcar-csi2: Call get_frame_desc to find out VC & DT (Gen3) Tomi Valkeinen
2026-03-11 13:53 ` [PATCH v5 09/10] media: rcar-csi2: Add full streams support Tomi Valkeinen
2026-03-11 13:53 ` [PATCH v5 10/10] media: rcar-isp: " Tomi Valkeinen
2026-03-11 17:38 ` [PATCH v5 00/10] media: rcar: Streams support Niklas Söderlund
2026-03-11 18:03   ` Tomi Valkeinen
2026-03-18 20:33 ` Laurent Pinchart

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260318204442.GF716464@killaraus.ideasonboard.com \
    --to=laurent.pinchart@ideasonboard.com \
    --cc=jacopo.mondi@ideasonboard.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=mchehab+huawei@kernel.org \
    --cc=mchehab@kernel.org \
    --cc=niklas.soderlund+renesas@ragnatech.se \
    --cc=niklas.soderlund@ragnatech.se \
    --cc=sakari.ailus@linux.intel.com \
    --cc=tomi.valkeinen+renesas@ideasonboard.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.