All of lore.kernel.org
 help / color / mirror / Atom feed
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Cc: "Niklas Söderlund" <niklas.soderlund@ragnatech.se>,
	"Mauro Carvalho Chehab" <mchehab@kernel.org>,
	"Sakari Ailus" <sakari.ailus@linux.intel.com>,
	linux-media@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	"Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>,
	"Mauro Carvalho Chehab" <mchehab+huawei@kernel.org>,
	"Jacopo Mondi" <jacopo.mondi@ideasonboard.com>
Subject: Re: [PATCH v5 05/10] media: rcar-isp: Switch to Streams API
Date: Wed, 18 Mar 2026 23:12:18 +0200	[thread overview]
Message-ID: <20260318211218.GI716464@killaraus.ideasonboard.com> (raw)
In-Reply-To: <20260311-rcar-streams-v5-5-3e6c957d7567@ideasonboard.com>

On Wed, Mar 11, 2026 at 03:53:18PM +0200, Tomi Valkeinen wrote:
> Switch to Streams API with a single hardcoded route.
> 
> For single-stream use case there should be no change in behavior.
> 
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>

Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

> ---
>  drivers/media/platform/renesas/rcar-isp/csisp.c | 69 ++++++++++++++++++++++---
>  1 file changed, 62 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/media/platform/renesas/rcar-isp/csisp.c b/drivers/media/platform/renesas/rcar-isp/csisp.c
> index 58a9a3bd9f75..8ac45516aa39 100644
> --- a/drivers/media/platform/renesas/rcar-isp/csisp.c
> +++ b/drivers/media/platform/renesas/rcar-isp/csisp.c
> @@ -124,6 +124,17 @@ static const struct rcar_isp_format rcar_isp_formats[] = {
>  	},
>  };
>  
> +static const struct v4l2_mbus_framefmt risp_default_fmt = {
> +	.width = 1920,
> +	.height = 1080,
> +	.code = MEDIA_BUS_FMT_RGB888_1X24,
> +	.colorspace = V4L2_COLORSPACE_SRGB,
> +	.field = V4L2_FIELD_NONE,
> +	.ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT,
> +	.quantization = V4L2_QUANTIZATION_DEFAULT,
> +	.xfer_func = V4L2_XFER_FUNC_DEFAULT,
> +};
> +
>  static const struct rcar_isp_format *risp_code_to_fmt(unsigned int code)
>  {
>  	unsigned int i;
> @@ -216,13 +227,20 @@ static void risp_power_off(struct rcar_isp *isp)
>  
>  static int risp_start(struct rcar_isp *isp, struct v4l2_subdev_state *state)
>  {
> +	const struct v4l2_subdev_route *route;
>  	const struct v4l2_mbus_framefmt *fmt;
>  	const struct rcar_isp_format *format;
>  	unsigned int vc;
>  	u32 sel_csi = 0;
>  	int ret;
>  
> -	fmt = v4l2_subdev_state_get_format(state, RCAR_ISP_SINK);
> +	if (state->routing.num_routes != 1)
> +		return -EINVAL;
> +
> +	route = &state->routing.routes[0];
> +
> +	fmt = v4l2_subdev_state_get_format(state, route->sink_pad,
> +					   route->sink_stream);
>  	if (!fmt)
>  		return -EINVAL;
>  
> @@ -341,7 +359,7 @@ static int risp_set_pad_format(struct v4l2_subdev *sd,
>  			       struct v4l2_subdev_state *state,
>  			       struct v4l2_subdev_format *format)
>  {
> -	struct v4l2_mbus_framefmt *framefmt;
> +	struct v4l2_mbus_framefmt *fmt;
>  
>  	if (format->pad > RCAR_ISP_SINK)
>  		return v4l2_subdev_get_fmt(sd, state, format);
> @@ -349,10 +367,20 @@ static int risp_set_pad_format(struct v4l2_subdev *sd,
>  	if (!risp_code_to_fmt(format->format.code))
>  		format->format.code = rcar_isp_formats[0].code;
>  
> -	for (unsigned int i = 0; i < RCAR_ISP_NUM_PADS; i++) {
> -		framefmt = v4l2_subdev_state_get_format(state, i);
> -		*framefmt = format->format;
> -	}
> +	/* Set sink format. */
> +	fmt = v4l2_subdev_state_get_format(state, format->pad, format->stream);
> +	if (!fmt)
> +		return -EINVAL;
> +
> +	*fmt = format->format;
> +
> +	/* Propagate the format to the source pad. */
> +	fmt = v4l2_subdev_state_get_opposite_stream_format(state, format->pad,
> +							   format->stream);
> +	if (!fmt)
> +		return -EINVAL;
> +
> +	*fmt = format->format;
>  
>  	return 0;
>  }
> @@ -369,6 +397,32 @@ static const struct v4l2_subdev_ops rcar_isp_subdev_ops = {
>  	.pad	= &risp_pad_ops,
>  };
>  
> +static int risp_init_state(struct v4l2_subdev *sd,
> +			   struct v4l2_subdev_state *state)
> +{
> +	static struct v4l2_subdev_route routes[] = {
> +		{
> +			.sink_pad = RCAR_ISP_SINK,
> +			.sink_stream = 0,
> +			.source_pad = RCAR_ISP_PORT0,
> +			.source_stream = 0,
> +			.flags = V4L2_SUBDEV_ROUTE_FL_ACTIVE,
> +		},
> +	};
> +
> +	static const struct v4l2_subdev_krouting routing = {
> +		.num_routes = ARRAY_SIZE(routes),
> +		.routes = routes,
> +	};
> +
> +	return v4l2_subdev_set_routing_with_fmt(sd, state, &routing,
> +						&risp_default_fmt);
> +}
> +
> +static const struct v4l2_subdev_internal_ops risp_internal_ops = {
> +	.init_state = risp_init_state,
> +};
> +
>  /* -----------------------------------------------------------------------------
>   * Async handling and registration of subdevices and links
>   */
> @@ -526,11 +580,12 @@ static int risp_probe(struct platform_device *pdev)
>  
>  	isp->subdev.owner = THIS_MODULE;
>  	isp->subdev.dev = &pdev->dev;
> +	isp->subdev.internal_ops = &risp_internal_ops;
>  	v4l2_subdev_init(&isp->subdev, &rcar_isp_subdev_ops);
>  	v4l2_set_subdevdata(&isp->subdev, &pdev->dev);
>  	snprintf(isp->subdev.name, sizeof(isp->subdev.name), "%s %s",
>  		 KBUILD_MODNAME, dev_name(&pdev->dev));
> -	isp->subdev.flags = V4L2_SUBDEV_FL_HAS_DEVNODE;
> +	isp->subdev.flags = V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_STREAMS;
>  
>  	isp->subdev.entity.function = MEDIA_ENT_F_VID_MUX;
>  	isp->subdev.entity.ops = &risp_entity_ops;
> 

-- 
Regards,

Laurent Pinchart

  reply	other threads:[~2026-03-18 21:12 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-03-11 13:53 [PATCH v5 00/10] media: rcar: Streams support Tomi Valkeinen
2026-03-11 13:53 ` [PATCH v5 01/10] media: rcar-vin: Link VINs on Gen3 to a single channel on each CSI-2 Tomi Valkeinen
2026-04-04 12:09   ` Niklas Söderlund
2026-03-11 13:53 ` [PATCH v5 02/10] media: rcar-isp: Move {enable|disable}_streams() calls Tomi Valkeinen
2026-03-18 20:44   ` Laurent Pinchart
2026-03-11 13:53 ` [PATCH v5 03/10] media: rcar-csi2: " Tomi Valkeinen
2026-03-18 20:54   ` Laurent Pinchart
2026-04-04 12:19     ` Niklas Söderlund
2026-06-16 12:35       ` Laurent Pinchart
2026-06-16 11:20     ` Tomi Valkeinen
2026-06-16 12:34       ` Laurent Pinchart
2026-06-16 14:04         ` Niklas Söderlund
2026-06-17  9:33           ` Tomi Valkeinen
2026-03-11 13:53 ` [PATCH v5 04/10] media: rcar-csi2: Switch to Streams API Tomi Valkeinen
2026-03-18 21:04   ` Laurent Pinchart
2026-06-16 11:22     ` Tomi Valkeinen
2026-06-16 12:27       ` Laurent Pinchart
2026-06-16 13:26         ` Tomi Valkeinen
2026-06-16 13:41           ` Laurent Pinchart
2026-03-11 13:53 ` [PATCH v5 05/10] media: rcar-isp: " Tomi Valkeinen
2026-03-18 21:12   ` Laurent Pinchart [this message]
2026-03-11 13:53 ` [PATCH v5 06/10] media: rcar-csi2: Add .get_frame_desc op Tomi Valkeinen
2026-03-18 21:16   ` Laurent Pinchart
2026-06-16 11:30     ` Tomi Valkeinen
2026-06-16 12:30       ` Laurent Pinchart
2026-06-16 13:12         ` Tomi Valkeinen
2026-06-16 13:21           ` Laurent Pinchart
2026-03-11 13:53 ` [PATCH v5 07/10] media: rcar-isp: Call get_frame_desc to find out VC & DT Tomi Valkeinen
2026-03-11 13:53 ` [PATCH v5 08/10] media: rcar-csi2: Call get_frame_desc to find out VC & DT (Gen3) Tomi Valkeinen
2026-03-11 13:53 ` [PATCH v5 09/10] media: rcar-csi2: Add full streams support Tomi Valkeinen
2026-03-11 13:53 ` [PATCH v5 10/10] media: rcar-isp: " Tomi Valkeinen
2026-03-11 17:38 ` [PATCH v5 00/10] media: rcar: Streams support Niklas Söderlund
2026-03-11 18:03   ` Tomi Valkeinen
2026-03-18 20:33 ` Laurent Pinchart

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260318211218.GI716464@killaraus.ideasonboard.com \
    --to=laurent.pinchart@ideasonboard.com \
    --cc=jacopo.mondi@ideasonboard.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=mchehab+huawei@kernel.org \
    --cc=mchehab@kernel.org \
    --cc=niklas.soderlund+renesas@ragnatech.se \
    --cc=niklas.soderlund@ragnatech.se \
    --cc=sakari.ailus@linux.intel.com \
    --cc=tomi.valkeinen+renesas@ideasonboard.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.