From: kernel test robot <lkp@intel.com>
To: oe-kbuild@lists.linux.dev
Cc: lkp@intel.com
Subject: [broadcom-stblinux:next 18/20] arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dtb: leds (gpio-leds): led-0:linux,default-trigger: 'oneOf' conditional failed, one must be fixed:
Date: Sun, 22 Mar 2026 04:54:07 +0100 [thread overview]
Message-ID: <202603220433.1VGVAFUE-lkp@intel.com> (raw)
::::::
:::::: Manual check reason: "dtcheck: binding changes may go via different trees"
::::::
BCC: lkp@intel.com
CC: oe-kbuild-all@lists.linux.dev
TO: Rosen Penev <rosenp@gmail.com>
CC: Florian Fainelli <florian.fainelli@broadcom.com>
tree: https://github.com/Broadcom/stblinux next
head: d554d58339a136fb104ea2bf1fa18e08e2a5e880
commit: 1d0d588599345f761ba0da597c552675c6d2e14d [18/20] ARM: dts: BCM5301X: EA9200: add LEDs
:::::: branch date: 30 hours ago
:::::: commit date: 31 hours ago
config: arm-randconfig-2051-20260321 (https://download.01.org/0day-ci/archive/20260322/202603220433.1VGVAFUE-lkp@intel.com/config)
compiler: arm-linux-gnueabi-gcc (GCC) 8.5.0
dtschema: 2025.13.dev8+g0515abdd9
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20260322/202603220433.1VGVAFUE-lkp@intel.com/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/r/202603220433.1VGVAFUE-lkp@intel.com/
dtcheck warnings: (new ones prefixed by >>)
arch/arm/boot/dts/broadcom/bcm5301x-nand-cs0.dtsi:10.18-19.5: Warning (avoid_unnecessary_addr_size): /nand-controller@18028000/nand@0: unnecessary #address-cells/#size-cells without "ranges", "dma-ranges" or child "reg" or "ranges" property
arch/arm/boot/dts/broadcom/bcm-ns.dtsi:24.28-47.4: Warning (unique_unit_address_if_enabled): /chipcommon-a-bus@18000000: duplicate unit-address (also used in node /axi@18000000)
arch/arm/boot/dts/broadcom/bcm-ns.dtsi:377.22-382.4: Warning (unique_unit_address_if_enabled): /mdio@18003000: duplicate unit-address (also used in node /mdio-mux@18003000)
arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dtb: /axi@18000000: failed to match any schema with compatible: ['brcm,bus-axi']
arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dtb: ethernet-switch@18007000 (brcm,bcm53012-srab): ports:port@8: 'phy-mode' is a required property
from schema $id: http://devicetree.org/schemas/net/dsa/brcm,b53.yaml
arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dtb: ethernet-switch@18007000 (brcm,bcm53012-srab): Unevaluated properties are not allowed ('ports' was unexpected)
from schema $id: http://devicetree.org/schemas/net/dsa/brcm,b53.yaml
>> arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dtb: leds (gpio-leds): led-0:linux,default-trigger: 'oneOf' conditional failed, one must be fixed:
'rfkill-none' is not one of ['backlight', 'default-on', 'heartbeat', 'disk-activity', 'disk-read', 'disk-write', 'timer', 'pattern', 'audio-micmute', 'audio-mute', 'bluetooth-power', 'flash', 'kbd-capslock', 'mtd', 'nand-disk', 'netdev', 'none', 'rc-feedback', 'torch', 'usb-gadget', 'usb-host', 'usbport']
'rfkill-none' does not match '^cpu[0-9]*$'
'rfkill-none' does not match '^hci[0-9]+-power$'
'rfkill-none' does not match '^mmc[0-9]+$'
'rfkill-none' does not match '^phy[0-9]+tx$'
from schema $id: http://devicetree.org/schemas/leds/leds-gpio.yaml
--
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
reply other threads:[~2026-03-22 3:54 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=202603220433.1VGVAFUE-lkp@intel.com \
--to=lkp@intel.com \
--cc=oe-kbuild@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.