[broadcom-stblinux:next 18/20] arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dtb: leds (gpio-leds): led-0:linux,default-trigger: 'oneOf' conditional failed, one must be fixed:

[broadcom-stblinux:next 18/20] arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dtb: leds (gpio-leds): led-0:linux,default-trigger: 'oneOf' conditional failed, one must be fixed:

[kernel test robot]

:::::: 
:::::: Manual check reason: "dtcheck: binding changes may go via different trees"
:::::: 

BCC: lkp@intel.com
CC: oe-kbuild-all@lists.linux.dev
TO: Rosen Penev <rosenp@gmail.com>
CC: Florian Fainelli <florian.fainelli@broadcom.com>

tree:   https://github.com/Broadcom/stblinux next
head:   d554d58339a136fb104ea2bf1fa18e08e2a5e880
commit: 1d0d588599345f761ba0da597c552675c6d2e14d [18/20] ARM: dts: BCM5301X: EA9200: add LEDs
:::::: branch date: 30 hours ago
:::::: commit date: 31 hours ago
config: arm-randconfig-2051-20260321 (https://download.01.org/0day-ci/archive/20260322/202603220433.1VGVAFUE-lkp@intel.com/config)
compiler: arm-linux-gnueabi-gcc (GCC) 8.5.0
dtschema: 2025.13.dev8+g0515abdd9
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20260322/202603220433.1VGVAFUE-lkp@intel.com/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/r/202603220433.1VGVAFUE-lkp@intel.com/

dtcheck warnings: (new ones prefixed by >>)
   arch/arm/boot/dts/broadcom/bcm5301x-nand-cs0.dtsi:10.18-19.5: Warning (avoid_unnecessary_addr_size): /nand-controller@18028000/nand@0: unnecessary #address-cells/#size-cells without "ranges", "dma-ranges" or child "reg" or "ranges" property
   arch/arm/boot/dts/broadcom/bcm-ns.dtsi:24.28-47.4: Warning (unique_unit_address_if_enabled): /chipcommon-a-bus@18000000: duplicate unit-address (also used in node /axi@18000000)
   arch/arm/boot/dts/broadcom/bcm-ns.dtsi:377.22-382.4: Warning (unique_unit_address_if_enabled): /mdio@18003000: duplicate unit-address (also used in node /mdio-mux@18003000)
   arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dtb: /axi@18000000: failed to match any schema with compatible: ['brcm,bus-axi']
   arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dtb: ethernet-switch@18007000 (brcm,bcm53012-srab): ports:port@8: 'phy-mode' is a required property
   	from schema $id: http://devicetree.org/schemas/net/dsa/brcm,b53.yaml
   arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dtb: ethernet-switch@18007000 (brcm,bcm53012-srab): Unevaluated properties are not allowed ('ports' was unexpected)
   	from schema $id: http://devicetree.org/schemas/net/dsa/brcm,b53.yaml
>> arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dtb: leds (gpio-leds): led-0:linux,default-trigger: 'oneOf' conditional failed, one must be fixed:
   	'rfkill-none' is not one of ['backlight', 'default-on', 'heartbeat', 'disk-activity', 'disk-read', 'disk-write', 'timer', 'pattern', 'audio-micmute', 'audio-mute', 'bluetooth-power', 'flash', 'kbd-capslock', 'mtd', 'nand-disk', 'netdev', 'none', 'rc-feedback', 'torch', 'usb-gadget', 'usb-host', 'usbport']
   	'rfkill-none' does not match '^cpu[0-9]*$'
   	'rfkill-none' does not match '^hci[0-9]+-power$'
   	'rfkill-none' does not match '^mmc[0-9]+$'
   	'rfkill-none' does not match '^phy[0-9]+tx$'
   	from schema $id: http://devicetree.org/schemas/leds/leds-gpio.yaml

-- 
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki