From: Yixun Lan <dlan@kernel.org>
To: linux-kernel@vger.kernel.org, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Paul Walmsley <pjw@kernel.org>,
Palmer Dabbelt <palmer@dabbelt.com>,
Albert Ou <aou@eecs.berkeley.edu>,
Alexandre Ghiti <alex@ghiti.fr>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@vger.kernel.org>,
"open list:RISC-V ARCHITECTURE" <linux-riscv@lists.infradead.org>,
"open list:RISC-V SPACEMIT SoC Support"
<spacemit@lists.linux.dev>
Subject: Re: [PATCH 4/6] riscv: dts: spacemit: enable QSPI and add SPI NOR on Milk-V Jupiter
Date: Wed, 25 Mar 2026 06:09:50 +0800 [thread overview]
Message-ID: <20260324220950-GKB767626@kernel.org> (raw)
In-Reply-To: <acL_xPYiGXUp_Tir@aurel32.net>
Hi Aurelien,
On 22:19 Tue 24 Mar , Aurelien Jarno wrote:
> Hi Yixun,
>
> On 2026-03-24 17:02, Yixun Lan wrote:
> > Hi Aurelien,
..
> > ..
> > > Also add the bootph-pre-ram property to make the device tree usable by
> > > early firmware/bootloaders without modification, as U-Boot is stored on
> > > this NOR flash.
> > Is the dtb file actually used by U-Boot? I'd highly doubt about this,
> > if not the case or has not been tested, I'd suggest then not to add
> > this property..
>
> It is currently not used by U-Boot, currently SPL support is not
> available, but patches have been posted to added it. I just wanted to
> anticipate the addition of the Milk-V Jupiter board in U-boot, but if
> that hurt, i can remove it (or you can removed it when merging).
Not hurt since it isn't really used in Kernel, but I just don't
want to add things without test..
I can remove it if there is no other changes, then no iteration needed.
Let's wait a few more days to see if people have additional comments for
this series
--
Yixun Lan (dlan)
WARNING: multiple messages have this Message-ID (diff)
From: Yixun Lan <dlan@kernel.org>
To: linux-kernel@vger.kernel.org, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Paul Walmsley <pjw@kernel.org>,
Palmer Dabbelt <palmer@dabbelt.com>,
Albert Ou <aou@eecs.berkeley.edu>,
Alexandre Ghiti <alex@ghiti.fr>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@vger.kernel.org>,
"open list:RISC-V ARCHITECTURE" <linux-riscv@lists.infradead.org>,
"open list:RISC-V SPACEMIT SoC Support"
<spacemit@lists.linux.dev>
Subject: Re: [PATCH 4/6] riscv: dts: spacemit: enable QSPI and add SPI NOR on Milk-V Jupiter
Date: Wed, 25 Mar 2026 06:09:50 +0800 [thread overview]
Message-ID: <20260324220950-GKB767626@kernel.org> (raw)
In-Reply-To: <acL_xPYiGXUp_Tir@aurel32.net>
Hi Aurelien,
On 22:19 Tue 24 Mar , Aurelien Jarno wrote:
> Hi Yixun,
>
> On 2026-03-24 17:02, Yixun Lan wrote:
> > Hi Aurelien,
..
> > ..
> > > Also add the bootph-pre-ram property to make the device tree usable by
> > > early firmware/bootloaders without modification, as U-Boot is stored on
> > > this NOR flash.
> > Is the dtb file actually used by U-Boot? I'd highly doubt about this,
> > if not the case or has not been tested, I'd suggest then not to add
> > this property..
>
> It is currently not used by U-Boot, currently SPL support is not
> available, but patches have been posted to added it. I just wanted to
> anticipate the addition of the Milk-V Jupiter board in U-boot, but if
> that hurt, i can remove it (or you can removed it when merging).
Not hurt since it isn't really used in Kernel, but I just don't
want to add things without test..
I can remove it if there is no other changes, then no iteration needed.
Let's wait a few more days to see if people have additional comments for
this series
--
Yixun Lan (dlan)
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
next prev parent reply other threads:[~2026-03-24 22:09 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-22 20:28 [PATCH 0/6] riscv: dts: spacemit: enable more devices Aurelien Jarno
2026-03-22 20:28 ` Aurelien Jarno
2026-03-22 20:28 ` [PATCH 1/6] riscv: dts: spacemit: add LEDs for Milk-V Jupiter board Aurelien Jarno
2026-03-22 20:28 ` Aurelien Jarno
2026-03-24 7:54 ` Javier Martinez Canillas
2026-03-24 7:54 ` Javier Martinez Canillas
2026-03-22 20:28 ` [PATCH 2/6] riscv: dts: spacemit: add 24c04 eeprom on Milk-V Jupiter Aurelien Jarno
2026-03-22 20:28 ` Aurelien Jarno
2026-03-24 7:55 ` Javier Martinez Canillas
2026-03-24 7:55 ` Javier Martinez Canillas
2026-03-22 20:28 ` [PATCH 3/6] riscv: dts: spacemit: add i2c aliases " Aurelien Jarno
2026-03-22 20:28 ` Aurelien Jarno
2026-03-24 7:56 ` Javier Martinez Canillas
2026-03-24 7:56 ` Javier Martinez Canillas
2026-03-22 20:28 ` [PATCH 4/6] riscv: dts: spacemit: enable QSPI and add SPI NOR " Aurelien Jarno
2026-03-22 20:28 ` Aurelien Jarno
2026-03-24 9:02 ` Yixun Lan
2026-03-24 9:02 ` Yixun Lan
2026-03-24 17:07 ` Yao Zi
2026-03-24 17:07 ` Yao Zi
2026-03-24 21:59 ` Yixun Lan
2026-03-24 21:59 ` Yixun Lan
2026-03-24 21:19 ` Aurelien Jarno
2026-03-24 21:19 ` Aurelien Jarno
2026-03-24 22:09 ` Yixun Lan [this message]
2026-03-24 22:09 ` Yixun Lan
2026-03-22 20:28 ` [PATCH 5/6] riscv: dts: spacemit: enable USB 3 ports " Aurelien Jarno
2026-03-22 20:28 ` Aurelien Jarno
2026-03-24 8:01 ` Javier Martinez Canillas
2026-03-24 8:01 ` Javier Martinez Canillas
2026-03-22 20:28 ` [PATCH 6/6] riscv: dts: spacemit: enable PCIe " Aurelien Jarno
2026-03-22 20:28 ` Aurelien Jarno
2026-03-24 8:02 ` Javier Martinez Canillas
2026-03-24 8:02 ` Javier Martinez Canillas
2026-03-26 7:34 ` Yixun Lan
2026-03-26 7:34 ` Yixun Lan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260324220950-GKB767626@kernel.org \
--to=dlan@kernel.org \
--cc=alex@ghiti.fr \
--cc=aou@eecs.berkeley.edu \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=palmer@dabbelt.com \
--cc=pjw@kernel.org \
--cc=robh@kernel.org \
--cc=spacemit@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.