All of lore.kernel.org
 help / color / mirror / Atom feed
From: Anand Moon <linux.amoon@gmail.com>
To: Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>, Yixun Lan <dlan@kernel.org>,
	Paul Walmsley <pjw@kernel.org>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Albert Ou <aou@eecs.berkeley.edu>,
	Alexandre Ghiti <alex@ghiti.fr>,
	devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
	FLATTENED DEVICE TREE BINDINGS),
	linux-riscv@lists.infradead.org (open list:RISC-V SPACEMIT SoC
	Support),
	spacemit@lists.linux.dev (open list:RISC-V SPACEMIT SoC Support),
	linux-kernel@vger.kernel.org (open list)
Cc: Anand Moon <linux.amoon@gmail.com>, Han Gao <gaohan@iscas.ac.cn>,
	Ze Huang <huang.ze@linux.dev>, Chukun Pan <amadeus@jmu.edu.cn>
Subject: [PATCH linux-next v1 1/3] riscv: dts: spacemit: k1-bananapi-f3: Add vcc5v0_sys regulator for Banana Pi F3
Date: Wed, 25 Mar 2026 13:46:08 +0530	[thread overview]
Message-ID: <20260325081700.1502-2-linux.amoon@gmail.com> (raw)
In-Reply-To: <20260325081700.1502-1-linux.amoon@gmail.com>

Define the system 5V fixed regulator (vcc5v0_sys) supplied by the
DC input. As per the schematics, vcc5v0_sys is the input power source
for the VCC5V0_HUB and 5V_VBUS reglators. Update these regulators
to correctly reference vcc5v0_sys as their parent (vin-supply).

Cc: Han Gao <gaohan@iscas.ac.cn>
Cc: Ze Huang <huang.ze@linux.dev>
Cc: Chukun Pan <amadeus@jmu.edu.cn>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
 arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts b/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
index 5790d927b93d..9727ecdd9f6b 100644
--- a/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
+++ b/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
@@ -50,6 +50,16 @@ reg_dc_in: regulator-dc-in-12v {
 		regulator-always-on;
 	};
 
+	reg_vcc5v0_sys: regulator-vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+		vin-supply = <&reg_dc_in>;
+	};
+
 	reg_vcc_4v: regulator-vcc-4v {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_4v";
@@ -66,6 +76,7 @@ regulator-usb3-vbus-5v {
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 		regulator-always-on;
+		vin-supply = <&reg_vcc5v0_sys>;
 		gpio = <&gpio K1_GPIO(97) GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
@@ -75,6 +86,7 @@ usb3_hub_5v: regulator-usb3-hub-5v {
 		regulator-name = "USB30_HUB";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_vcc5v0_sys>;
 		gpio = <&gpio K1_GPIO(123) GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
-- 
2.53.0


WARNING: multiple messages have this Message-ID (diff)
From: Anand Moon <linux.amoon@gmail.com>
To: Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>, Yixun Lan <dlan@kernel.org>,
	Paul Walmsley <pjw@kernel.org>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Albert Ou <aou@eecs.berkeley.edu>,
	Alexandre Ghiti <alex@ghiti.fr>,
	devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
	FLATTENED DEVICE TREE BINDINGS),
	linux-riscv@lists.infradead.org (open list:RISC-V SPACEMIT SoC
	Support),
	spacemit@lists.linux.dev (open list:RISC-V SPACEMIT SoC Support),
	linux-kernel@vger.kernel.org (open list)
Cc: Anand Moon <linux.amoon@gmail.com>, Han Gao <gaohan@iscas.ac.cn>,
	Ze Huang <huang.ze@linux.dev>, Chukun Pan <amadeus@jmu.edu.cn>
Subject: [PATCH linux-next v1 1/3] riscv: dts: spacemit: k1-bananapi-f3: Add vcc5v0_sys regulator for Banana Pi F3
Date: Wed, 25 Mar 2026 13:46:08 +0530	[thread overview]
Message-ID: <20260325081700.1502-2-linux.amoon@gmail.com> (raw)
In-Reply-To: <20260325081700.1502-1-linux.amoon@gmail.com>

Define the system 5V fixed regulator (vcc5v0_sys) supplied by the
DC input. As per the schematics, vcc5v0_sys is the input power source
for the VCC5V0_HUB and 5V_VBUS reglators. Update these regulators
to correctly reference vcc5v0_sys as their parent (vin-supply).

Cc: Han Gao <gaohan@iscas.ac.cn>
Cc: Ze Huang <huang.ze@linux.dev>
Cc: Chukun Pan <amadeus@jmu.edu.cn>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
 arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts b/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
index 5790d927b93d..9727ecdd9f6b 100644
--- a/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
+++ b/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
@@ -50,6 +50,16 @@ reg_dc_in: regulator-dc-in-12v {
 		regulator-always-on;
 	};
 
+	reg_vcc5v0_sys: regulator-vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+		vin-supply = <&reg_dc_in>;
+	};
+
 	reg_vcc_4v: regulator-vcc-4v {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_4v";
@@ -66,6 +76,7 @@ regulator-usb3-vbus-5v {
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 		regulator-always-on;
+		vin-supply = <&reg_vcc5v0_sys>;
 		gpio = <&gpio K1_GPIO(97) GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
@@ -75,6 +86,7 @@ usb3_hub_5v: regulator-usb3-hub-5v {
 		regulator-name = "USB30_HUB";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_vcc5v0_sys>;
 		gpio = <&gpio K1_GPIO(123) GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
-- 
2.53.0


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

  reply	other threads:[~2026-04-03 11:36 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-03-25  8:16 [PATCH linux-next v1 0/3] spacemit: k1-bananapi-f3: Fix the power source of USB3 nodes Anand Moon
2026-03-25  8:16 ` Anand Moon
2026-03-25  8:16 ` Anand Moon [this message]
2026-03-25  8:16   ` [PATCH linux-next v1 1/3] riscv: dts: spacemit: k1-bananapi-f3: Add vcc5v0_sys regulator for Banana Pi F3 Anand Moon
2026-03-25  8:16 ` [PATCH linux-next v1 2/3] riscv: dts: spacemit: k1-bananapi-f3: Update USB regulator on onboard usb and lable Anand Moon
2026-03-25  8:16   ` Anand Moon
2026-03-25  8:16 ` [PATCH linux-next v1 3/3] riscv: dts: spacemit: k1-bananapi-f3: Correct USB hub power hierarchy Anand Moon
2026-03-25  8:16   ` Anand Moon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260325081700.1502-2-linux.amoon@gmail.com \
    --to=linux.amoon@gmail.com \
    --cc=alex@ghiti.fr \
    --cc=amadeus@jmu.edu.cn \
    --cc=aou@eecs.berkeley.edu \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dlan@kernel.org \
    --cc=gaohan@iscas.ac.cn \
    --cc=huang.ze@linux.dev \
    --cc=krzk+dt@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=palmer@dabbelt.com \
    --cc=pjw@kernel.org \
    --cc=robh@kernel.org \
    --cc=spacemit@lists.linux.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.