All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andre Przywara <andre.przywara@arm.com>
To: u-boot@lists.denx.de
Cc: Tom Rini <trini@konsulko.com>,
	Quentin Schulz <quentin.schulz@cherry.de>,
	Jernej Skrabec <jernej.skrabec@gmail.com>,
	Paul Kocialkowski <contact@paulk.fr>,
	linux-sunxi@lists.linux.dev
Subject: [PATCH 0/3] sunxi: Fix and extend SPL power LED support
Date: Wed,  8 Apr 2026 00:34:44 +0200	[thread overview]
Message-ID: <20260407223447.4956-1-andre.przywara@arm.com> (raw)

With the demise of the legacy SPL LED framework a new, much simpler
version emerged for Allwinner SoCs: Just define the GPIO number in
Kconfig, and some simple code turns the LED on very early.

I was looking at using this feature for boards with a GPIO controlled
power LED, as having a sign of life very early can be very handy.
So I grep'ed all DTs for those LEDs, and added the respective symbols to
the board's defconfig file.
Doing so revealed a small bug in the code when using active low LEDs,
so patch 1/3 fixes this.
Patch 2/3 adds the power LEDs to 32-bit boards, patch 3/3 to 64-bit
boards - just some arbitrary splitup to simplify review.

Please have a look and test if you have any of the boards.

Cheers,
Andre

Andre Przywara (3):
  sunxi: spl: fix SPL_SUNXI_LED active low configuration
  sunxi: configs: enable power LEDs on 32-bit boards
  sunxi: configs: enable power LEDs on 64-bit boards

 board/sunxi/board.c                      | 2 +-
 configs/A13-OLinuXinoM_defconfig         | 3 +++
 configs/Bananapi_M2_Ultra_defconfig      | 3 +++
 configs/Bananapi_m2m_defconfig           | 3 +++
 configs/Mele_A1000G_quad_defconfig       | 3 +++
 configs/Mele_A1000_defconfig             | 3 +++
 configs/Mele_M9_defconfig                | 3 +++
 configs/anbernic_rg35xx_h700_defconfig   | 3 +++
 configs/bananapi_m1_plus_defconfig       | 3 +++
 configs/bananapi_m2_berry_defconfig      | 3 +++
 configs/bananapi_m2_zero_defconfig       | 3 +++
 configs/bananapi_m64_defconfig           | 3 +++
 configs/beelink_gs1_defconfig            | 3 +++
 configs/beelink_x2_defconfig             | 3 +++
 configs/icnova-a20-adb4006_defconfig     | 3 +++
 configs/liontron-h-a133l_defconfig       | 3 +++
 configs/nanopi_duo2_defconfig            | 3 +++
 configs/nanopi_neo2_defconfig            | 3 +++
 configs/nanopi_neo_air_defconfig         | 3 +++
 configs/nanopi_neo_plus2_defconfig       | 3 +++
 configs/orangepi_2_defconfig             | 3 +++
 configs/orangepi_3_defconfig             | 3 +++
 configs/orangepi_lite2_defconfig         | 3 +++
 configs/orangepi_lite_defconfig          | 3 +++
 configs/orangepi_one_defconfig           | 3 +++
 configs/orangepi_pc2_defconfig           | 3 +++
 configs/orangepi_pc_defconfig            | 3 +++
 configs/orangepi_prime_defconfig         | 3 +++
 configs/orangepi_zero2_defconfig         | 3 +++
 configs/orangepi_zero_defconfig          | 3 +++
 configs/orangepi_zero_plus2_defconfig    | 3 +++
 configs/orangepi_zero_plus2_h3_defconfig | 3 +++
 configs/orangepi_zero_plus_defconfig     | 3 +++
 configs/radxa-cubie-a5e_defconfig        | 3 +++
 configs/tanix_tx1_defconfig              | 3 +++
 35 files changed, 103 insertions(+), 1 deletion(-)

-- 
2.46.4


             reply	other threads:[~2026-04-07 22:34 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-04-07 22:34 Andre Przywara [this message]
2026-04-07 22:34 ` [PATCH 1/3] sunxi: spl: fix SPL_SUNXI_LED active low configuration Andre Przywara
2026-04-08  8:27   ` Quentin Schulz
2026-04-09 15:56   ` Paul Kocialkowski
2026-04-21 17:12     ` Quentin Schulz
2026-04-27 13:07       ` Andre Przywara
2026-04-27 17:27         ` Quentin Schulz
2026-04-28  9:51           ` Paul Kocialkowski
2026-04-07 22:34 ` [PATCH 2/3] sunxi: configs: enable power LEDs on 32-bit boards Andre Przywara
2026-04-07 22:34 ` [PATCH 3/3] sunxi: configs: enable power LEDs on 64-bit boards Andre Przywara

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260407223447.4956-1-andre.przywara@arm.com \
    --to=andre.przywara@arm.com \
    --cc=contact@paulk.fr \
    --cc=jernej.skrabec@gmail.com \
    --cc=linux-sunxi@lists.linux.dev \
    --cc=quentin.schulz@cherry.de \
    --cc=trini@konsulko.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.