[PATCH 3/3] sunxi: configs: enable power LEDs on 64-bit boards

All of lore.kernel.org
 help / color / mirror / Atom feed

From: Andre Przywara <andre.przywara@arm.com>
To: u-boot@lists.denx.de
Cc: Tom Rini <trini@konsulko.com>,
	Quentin Schulz <quentin.schulz@cherry.de>,
	Jernej Skrabec <jernej.skrabec@gmail.com>,
	Paul Kocialkowski <contact@paulk.fr>,
	linux-sunxi@lists.linux.dev
Subject: [PATCH 3/3] sunxi: configs: enable power LEDs on 64-bit boards
Date: Wed,  8 Apr 2026 00:34:47 +0200	[thread overview]
Message-ID: <20260407223447.4956-4-andre.przywara@arm.com> (raw)
In-Reply-To: <20260407223447.4956-1-andre.przywara@arm.com>

We recently gained a simple way to enable a power LED very early in the
SPL boot, through simple Kconfig variables.

Add those symbols to those boards' defconfigs where the DT indicates a
default-on power LED. The number used is <port bank> * 32 + <pin no>,
an active low setup means CONFIG_SPL_SUNXI_LED_STATUS_STATE must be
undefined.

This will light up the power LED very early in the (SPL) boot phase on
those 64-bit boards.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
---
 configs/anbernic_rg35xx_h700_defconfig | 3 +++
 configs/bananapi_m64_defconfig         | 3 +++
 configs/beelink_gs1_defconfig          | 3 +++
 configs/liontron-h-a133l_defconfig     | 3 +++
 configs/nanopi_neo2_defconfig          | 3 +++
 configs/nanopi_neo_plus2_defconfig     | 3 +++
 configs/orangepi_3_defconfig           | 3 +++
 configs/orangepi_lite2_defconfig       | 3 +++
 configs/orangepi_pc2_defconfig         | 3 +++
 configs/orangepi_prime_defconfig       | 3 +++
 configs/orangepi_zero2_defconfig       | 3 +++
 configs/orangepi_zero_plus2_defconfig  | 3 +++
 configs/orangepi_zero_plus_defconfig   | 3 +++
 configs/radxa-cubie-a5e_defconfig      | 3 +++
 configs/tanix_tx1_defconfig            | 3 +++
 15 files changed, 45 insertions(+)

diff --git a/configs/anbernic_rg35xx_h700_defconfig b/configs/anbernic_rg35xx_h700_defconfig
index 2fa57cbecce..fb3df175521 100644
--- a/configs/anbernic_rg35xx_h700_defconfig
+++ b/configs/anbernic_rg35xx_h700_defconfig
@@ -16,6 +16,9 @@ CONFIG_DRAM_SUNXI_PHY_ADDR_MAP_1=y
 CONFIG_MACH_SUN50I_H616=y
 CONFIG_SUNXI_DRAM_H616_LPDDR4=y
 CONFIG_R_I2C_ENABLE=y
+CONFIG_SPL_SUNXI_LED_STATUS=y
+CONFIG_SPL_SUNXI_LED_STATUS_BIT=268
+CONFIG_SPL_SUNXI_LED_STATUS_STATE=y
 CONFIG_SPL_I2C=y
 CONFIG_SPL_SYS_I2C_LEGACY=y
 CONFIG_SYS_I2C_MVTWSI=y
diff --git a/configs/bananapi_m64_defconfig b/configs/bananapi_m64_defconfig
index d957071cb13..413de4919d5 100644
--- a/configs/bananapi_m64_defconfig
+++ b/configs/bananapi_m64_defconfig
@@ -4,6 +4,9 @@ CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-bananapi-m64"
 CONFIG_SPL=y
 CONFIG_MACH_SUN50I=y
 CONFIG_MMC_SUNXI_SLOT_EXTRA=2
+CONFIG_SPL_SUNXI_LED_STATUS=y
+CONFIG_SPL_SUNXI_LED_STATUS_BIT=120
+CONFIG_SPL_SUNXI_LED_STATUS_STATE=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_SUN8I_EMAC=y
diff --git a/configs/beelink_gs1_defconfig b/configs/beelink_gs1_defconfig
index de46d205453..6a1af7f9b3a 100644
--- a/configs/beelink_gs1_defconfig
+++ b/configs/beelink_gs1_defconfig
@@ -5,6 +5,9 @@ CONFIG_SPL=y
 CONFIG_MACH_SUN50I_H6=y
 CONFIG_SUNXI_DRAM_H6_LPDDR3=y
 CONFIG_MMC_SUNXI_SLOT_EXTRA=2
+CONFIG_SPL_SUNXI_LED_STATUS=y
+CONFIG_SPL_SUNXI_LED_STATUS_BIT=356
+CONFIG_SPL_SUNXI_LED_STATUS_STATE=y
 # CONFIG_PSCI_RESET is not set
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_LED=y
diff --git a/configs/liontron-h-a133l_defconfig b/configs/liontron-h-a133l_defconfig
index 831d5b56e3a..f7bb994509f 100644
--- a/configs/liontron-h-a133l_defconfig
+++ b/configs/liontron-h-a133l_defconfig
@@ -23,6 +23,9 @@ CONFIG_MACH_SUN50I_A133=y
 CONFIG_SUNXI_DRAM_A133_LPDDR4=y
 CONFIG_MMC_SUNXI_SLOT_EXTRA=2
 CONFIG_R_I2C_ENABLE=y
+CONFIG_SPL_SUNXI_LED_STATUS=y
+CONFIG_SPL_SUNXI_LED_STATUS_BIT=240
+# CONFIG_SPL_SUNXI_LED_STATUS_STATE is not set
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL_I2C=y
 CONFIG_SPL_SYS_I2C_LEGACY=y
diff --git a/configs/nanopi_neo2_defconfig b/configs/nanopi_neo2_defconfig
index 6704a24a880..83bf0326bd4 100644
--- a/configs/nanopi_neo2_defconfig
+++ b/configs/nanopi_neo2_defconfig
@@ -6,6 +6,9 @@ CONFIG_SPL=y
 CONFIG_MACH_SUN50I_H5=y
 CONFIG_DRAM_ZQ=3881977
 # CONFIG_DRAM_ODT_EN is not set
+CONFIG_SPL_SUNXI_LED_STATUS=y
+CONFIG_SPL_SUNXI_LED_STATUS_BIT=362
+CONFIG_SPL_SUNXI_LED_STATUS_STATE=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SUN8I_EMAC=y
 CONFIG_USB_EHCI_HCD=y
diff --git a/configs/nanopi_neo_plus2_defconfig b/configs/nanopi_neo_plus2_defconfig
index e80e32a63d4..024301f990c 100644
--- a/configs/nanopi_neo_plus2_defconfig
+++ b/configs/nanopi_neo_plus2_defconfig
@@ -7,6 +7,9 @@ CONFIG_MACH_SUN50I_H5=y
 CONFIG_DRAM_ZQ=3881977
 # CONFIG_DRAM_ODT_EN is not set
 CONFIG_MMC_SUNXI_SLOT_EXTRA=2
+CONFIG_SPL_SUNXI_LED_STATUS=y
+CONFIG_SPL_SUNXI_LED_STATUS_BIT=362
+CONFIG_SPL_SUNXI_LED_STATUS_STATE=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SUN8I_EMAC=y
 CONFIG_USB_EHCI_HCD=y
diff --git a/configs/orangepi_3_defconfig b/configs/orangepi_3_defconfig
index 125137bc321..1fa1676e091 100644
--- a/configs/orangepi_3_defconfig
+++ b/configs/orangepi_3_defconfig
@@ -6,6 +6,9 @@ CONFIG_MACH_SUN50I_H6=y
 CONFIG_SUNXI_DRAM_H6_LPDDR3=y
 CONFIG_MMC_SUNXI_SLOT_EXTRA=2
 CONFIG_BLUETOOTH_DT_DEVICE_FIXUP="brcm,bcm4345c5"
+CONFIG_SPL_SUNXI_LED_STATUS=y
+CONFIG_SPL_SUNXI_LED_STATUS_BIT=356
+CONFIG_SPL_SUNXI_LED_STATUS_STATE=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_PHY_SUN50I_USB3=y
 CONFIG_USB_XHCI_HCD=y
diff --git a/configs/orangepi_lite2_defconfig b/configs/orangepi_lite2_defconfig
index 577f7436c15..10864827adf 100644
--- a/configs/orangepi_lite2_defconfig
+++ b/configs/orangepi_lite2_defconfig
@@ -4,6 +4,9 @@ CONFIG_DEFAULT_DEVICE_TREE="sun50i-h6-orangepi-lite2"
 CONFIG_SPL=y
 CONFIG_MACH_SUN50I_H6=y
 CONFIG_SUNXI_DRAM_H6_LPDDR3=y
+CONFIG_SPL_SUNXI_LED_STATUS=y
+CONFIG_SPL_SUNXI_LED_STATUS_BIT=356
+CONFIG_SPL_SUNXI_LED_STATUS_STATE=y
 # CONFIG_PSCI_RESET is not set
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_USB_EHCI_HCD=y
diff --git a/configs/orangepi_pc2_defconfig b/configs/orangepi_pc2_defconfig
index d856a25814b..1e9a7cdaf7a 100644
--- a/configs/orangepi_pc2_defconfig
+++ b/configs/orangepi_pc2_defconfig
@@ -6,6 +6,9 @@ CONFIG_SPL=y
 CONFIG_MACH_SUN50I_H5=y
 CONFIG_DRAM_ZQ=3881977
 CONFIG_SPL_SPI_SUNXI=y
+CONFIG_SPL_SUNXI_LED_STATUS=y
+CONFIG_SPL_SUNXI_LED_STATUS_BIT=362
+CONFIG_SPL_SUNXI_LED_STATUS_STATE=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL_I2C=y
 CONFIG_SPL_SYS_I2C_LEGACY=y
diff --git a/configs/orangepi_prime_defconfig b/configs/orangepi_prime_defconfig
index e93154cc0e9..7f622fe70f1 100644
--- a/configs/orangepi_prime_defconfig
+++ b/configs/orangepi_prime_defconfig
@@ -6,6 +6,9 @@ CONFIG_SPL=y
 CONFIG_MACH_SUN50I_H5=y
 CONFIG_DRAM_ZQ=3881977
 # CONFIG_DRAM_ODT_EN is not set
+CONFIG_SPL_SUNXI_LED_STATUS=y
+CONFIG_SPL_SUNXI_LED_STATUS_BIT=362
+CONFIG_SPL_SUNXI_LED_STATUS_STATE=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SUN8I_EMAC=y
 CONFIG_USB_EHCI_HCD=y
diff --git a/configs/orangepi_zero2_defconfig b/configs/orangepi_zero2_defconfig
index 831bfe66e25..942b751e181 100644
--- a/configs/orangepi_zero2_defconfig
+++ b/configs/orangepi_zero2_defconfig
@@ -10,6 +10,9 @@ CONFIG_MACH_SUN50I_H616=y
 CONFIG_SUNXI_DRAM_H616_DDR3_1333=y
 CONFIG_R_I2C_ENABLE=y
 CONFIG_SPL_SPI_SUNXI=y
+CONFIG_SPL_SUNXI_LED_STATUS=y
+CONFIG_SPL_SUNXI_LED_STATUS_BIT=76
+CONFIG_SPL_SUNXI_LED_STATUS_STATE=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL_I2C=y
 CONFIG_SPL_SYS_I2C_LEGACY=y
diff --git a/configs/orangepi_zero_plus2_defconfig b/configs/orangepi_zero_plus2_defconfig
index c4d9800975c..945379533ab 100644
--- a/configs/orangepi_zero_plus2_defconfig
+++ b/configs/orangepi_zero_plus2_defconfig
@@ -7,6 +7,9 @@ CONFIG_MACH_SUN50I_H5=y
 CONFIG_DRAM_ZQ=3881977
 # CONFIG_DRAM_ODT_EN is not set
 CONFIG_MMC_SUNXI_SLOT_EXTRA=2
+CONFIG_SPL_SUNXI_LED_STATUS=y
+CONFIG_SPL_SUNXI_LED_STATUS_BIT=362
+CONFIG_SPL_SUNXI_LED_STATUS_STATE=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SUN8I_EMAC=y
 CONFIG_USB_EHCI_HCD=y
diff --git a/configs/orangepi_zero_plus_defconfig b/configs/orangepi_zero_plus_defconfig
index 4b6491dc846..2979c9f7f7b 100644
--- a/configs/orangepi_zero_plus_defconfig
+++ b/configs/orangepi_zero_plus_defconfig
@@ -6,6 +6,9 @@ CONFIG_SPL=y
 CONFIG_MACH_SUN50I_H5=y
 CONFIG_DRAM_ZQ=3881977
 # CONFIG_DRAM_ODT_EN is not set
+CONFIG_SPL_SUNXI_LED_STATUS=y
+CONFIG_SPL_SUNXI_LED_STATUS_BIT=362
+CONFIG_SPL_SUNXI_LED_STATUS_STATE=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SUN8I_EMAC=y
 CONFIG_USB_EHCI_HCD=y
diff --git a/configs/radxa-cubie-a5e_defconfig b/configs/radxa-cubie-a5e_defconfig
index 9d204ef5548..88e9a0879f7 100644
--- a/configs/radxa-cubie-a5e_defconfig
+++ b/configs/radxa-cubie-a5e_defconfig
@@ -15,6 +15,9 @@ CONFIG_DRAM_SUNXI_TPR12=0x3533302f
 CONFIG_MACH_SUN55I_A523=y
 CONFIG_MMC_SUNXI_SLOT_EXTRA=2
 CONFIG_R_I2C_ENABLE=y
+CONFIG_SPL_SUNXI_LED_STATUS=y
+CONFIG_SPL_SUNXI_LED_STATUS_BIT=356
+# CONFIG_SPL_SUNXI_LED_STATUS_STATE is not set
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL_I2C=y
 CONFIG_SPL_SYS_I2C_LEGACY=y
diff --git a/configs/tanix_tx1_defconfig b/configs/tanix_tx1_defconfig
index 1bd167ce0f6..0b5c57b93b9 100644
--- a/configs/tanix_tx1_defconfig
+++ b/configs/tanix_tx1_defconfig
@@ -14,6 +14,9 @@ CONFIG_MACH_SUN50I_H616=y
 CONFIG_SUNXI_DRAM_H616_LPDDR3=y
 CONFIG_MMC_SUNXI_SLOT_EXTRA=2
 CONFIG_R_I2C_ENABLE=y
+CONFIG_SPL_SUNXI_LED_STATUS=y
+CONFIG_SPL_SUNXI_LED_STATUS_BIT=231
+CONFIG_SPL_SUNXI_LED_STATUS_STATE=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL_I2C=y
 CONFIG_SPL_SYS_I2C_LEGACY=y
-- 
2.46.4

     prev parent reply	other threads:[~2026-04-07 22:35 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-04-07 22:34 [PATCH 0/3] sunxi: Fix and extend SPL power LED support Andre Przywara
2026-04-07 22:34 ` [PATCH 1/3] sunxi: spl: fix SPL_SUNXI_LED active low configuration Andre Przywara
2026-04-08  8:27   ` Quentin Schulz
2026-04-09 15:56   ` Paul Kocialkowski
2026-04-21 17:12     ` Quentin Schulz
2026-04-27 13:07       ` Andre Przywara
2026-04-27 17:27         ` Quentin Schulz
2026-04-28  9:51           ` Paul Kocialkowski
2026-04-07 22:34 ` [PATCH 2/3] sunxi: configs: enable power LEDs on 32-bit boards Andre Przywara
2026-04-07 22:34 ` Andre Przywara [this message]

find likely ancestor, descendant, or conflicting patches for this message:
( dfblob:2fa57cbecc dfblob:fb3df17552 dfblob:d957071cb1
dfblob:413de4919d dfblob:de46d20545 dfblob:6a1af7f9b3 dfblob:831d5b56e3
dfblob:f7bb994509 dfblob:6704a24a88 dfblob:83bf0326bd dfblob:e80e32a63d
dfblob:024301f990 dfblob:125137bc32 dfblob:1fa1676e09 dfblob:577f7436c1
dfblob:10864827ad dfblob:d856a25814 dfblob:1e9a7cdaf7 dfblob:e93154cc0e
dfblob:7f622fe70f dfblob:831bfe66e2 dfblob:942b751e18 dfblob:c4d9800975
dfblob:945379533a dfblob:4b6491dc84 dfblob:2979c9f7f7 dfblob:9d204ef554
dfblob:88e9a0879f dfblob:1bd167ce0f dfblob:0b5c57b93b )
 OR (
bs:"[PATCH 3/3] sunxi: configs: enable power LEDs on 64-bit boards" )
	(help)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260407223447.4956-4-andre.przywara@arm.com \
    --to=andre.przywara@arm.com \
    --cc=contact@paulk.fr \
    --cc=jernej.skrabec@gmail.com \
    --cc=linux-sunxi@lists.linux.dev \
    --cc=quentin.schulz@cherry.de \
    --cc=trini@konsulko.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Be sure your reply has a Subject: header at the top and a blank line before the message body.

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.