[PATCH v3 1/2] ASoC: rt1320-sdw: kcontrol for brown-out feature update

[PATCH v3 1/2] ASoC: rt1320-sdw: kcontrol for brown-out feature update

[jack.yu]

From: Jack Yu <jack.yu@realtek.com>

Create a kcontrol to enable or disable brown-out dynamically.

Signed-off-by: Jack Yu <jack.yu@realtek.com>
---
 sound/soc/codecs/rt1320-sdw.c | 40 +++++++++++++++++++++++++++++++++++
 sound/soc/codecs/rt1320-sdw.h |  1 +
 2 files changed, 41 insertions(+)

diff --git a/sound/soc/codecs/rt1320-sdw.c b/sound/soc/codecs/rt1320-sdw.c
index 8bb7e8497c72..84e8768f7881 100644
--- a/sound/soc/codecs/rt1320-sdw.c
+++ b/sound/soc/codecs/rt1320-sdw.c
@@ -2486,6 +2486,43 @@ static int rt1320_rae_update_put(struct snd_kcontrol *kcontrol,
 	return 0;
 }
 
+static int rt1320_brown_out_put(struct snd_kcontrol *kcontrol,
+				 struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
+	struct rt1320_sdw_priv *rt1320 = snd_soc_component_get_drvdata(component);
+	int ret;
+
+	if (!rt1320->hw_init)
+		return 0;
+
+	ret = pm_runtime_resume(component->dev);
+	if (ret < 0 && ret != -EACCES)
+		return ret;
+
+	rt1320->brown_out = ucontrol->value.integer.value[0];
+
+	if (rt1320->brown_out == 0)
+		regmap_write(rt1320->regmap, 0xdb03, 0x00);
+	else
+		regmap_write(rt1320->regmap, 0xdb03, 0xf0);
+
+
+	return 0;
+}
+
+static int rt1320_brown_out_get(struct snd_kcontrol *kcontrol,
+				     struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
+	struct rt1320_sdw_priv *rt1320 = snd_soc_component_get_drvdata(component);
+
+	ucontrol->value.integer.value[0] = rt1320->brown_out;
+
+	return 0;
+}
+
+
 static int rt1320_r0_temperature_get(struct snd_kcontrol *kcontrol,
 				     struct snd_ctl_elem_value *ucontrol)
 {
@@ -2545,6 +2582,8 @@ static const struct snd_kcontrol_new rt1320_snd_controls[] = {
 		rt1320_r0_temperature_get, rt1320_r0_temperature_put),
 	SOC_SINGLE_EXT("RAE Update", SND_SOC_NOPM, 0, 1, 0,
 		rt1320_rae_update_get, rt1320_rae_update_put),
+	SOC_SINGLE_EXT("Brown Out Switch", SND_SOC_NOPM, 0, 1, 0,
+		rt1320_brown_out_get, rt1320_brown_out_put),
 };
 
 static const struct snd_kcontrol_new rt1320_spk_l_dac =
@@ -2904,6 +2943,7 @@ static int rt1320_sdw_init(struct device *dev, struct regmap *regmap,
 	rt1320->fu_dapm_mute = true;
 	rt1320->fu_mixer_mute[0] = rt1320->fu_mixer_mute[1] =
 		rt1320->fu_mixer_mute[2] = rt1320->fu_mixer_mute[3] = true;
+	rt1320->brown_out = 1;
 
 	INIT_WORK(&rt1320->load_dspfw_work, rt1320_load_dspfw_work);
 
diff --git a/sound/soc/codecs/rt1320-sdw.h b/sound/soc/codecs/rt1320-sdw.h
index 5a9f496dd848..4a1d3fc4c8ee 100644
--- a/sound/soc/codecs/rt1320-sdw.h
+++ b/sound/soc/codecs/rt1320-sdw.h
@@ -159,6 +159,7 @@ struct rt1320_sdw_priv {
 	bool hw_init;
 	bool first_hw_init;
 	int version_id;
+	int brown_out;
 	unsigned int dev_id;
 	bool fu_dapm_mute;
 	bool fu_mixer_mute[4];
-- 
2.53.0

[PATCH v3 2/2] ASoC: rt1320-sdw: Add an approach to get new hardware advance gain

[jack.yu]

From: Jack Yu <jack.yu@realtek.com>

Add an approach to get new hardware advance gain,
and if there is no advance gain with this approach,
we can still get advance gain with original method.

Signed-off-by: Jack Yu <jack.yu@realtek.com>
---
 sound/soc/codecs/rt1320-sdw.c | 21 +++++++++++++++++++--
 sound/soc/codecs/rt1320-sdw.h | 13 +++++++++++++
 2 files changed, 32 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/rt1320-sdw.c b/sound/soc/codecs/rt1320-sdw.c
index 84e8768f7881..b5b72fb87de2 100644
--- a/sound/soc/codecs/rt1320-sdw.c
+++ b/sound/soc/codecs/rt1320-sdw.c
@@ -1013,13 +1013,30 @@ static void rt1320_set_advancemode(struct rt1320_sdw_priv *rt1320)
 	struct device *dev = &rt1320->sdw_slave->dev;
 	struct rt1320_datafixpoint r0_data[2];
 	unsigned short l_advancegain, r_advancegain;
+	FwPara_Get_HwSwGain audDriverDataHwSwGain;
+	unsigned int HwAdvGain;
 	int ret;
 
+	 /* Get new hardware advance gain by ID 1300 */
+	rt1320_fw_param_protocol(rt1320, RT1320_GET_PARAM, 1300,
+		&audDriverDataHwSwGain, sizeof(audDriverDataHwSwGain));
+	HwAdvGain = audDriverDataHwSwGain.HwAdvGain;
+	dev_dbg(dev, "%s, HwAdvGain=%d\n", __func__, HwAdvGain);
+	dev_dbg(dev, "%s, HwBasGain=%d\n", __func__, audDriverDataHwSwGain.HwBasGain);
+	dev_dbg(dev, "%s, SwAdvGain=%d\n", __func__, audDriverDataHwSwGain.SwAdvGain);
+	dev_dbg(dev, "%s, SwBasGain=%d\n", __func__, audDriverDataHwSwGain.SwBasGain);
+
 	/* Get advance gain/r0 */
 	rt1320_fw_param_protocol(rt1320, RT1320_GET_PARAM, 6, &r0_data[0], sizeof(struct rt1320_datafixpoint));
 	rt1320_fw_param_protocol(rt1320, RT1320_GET_PARAM, 7, &r0_data[1], sizeof(struct rt1320_datafixpoint));
-	l_advancegain = r0_data[0].advancegain;
-	r_advancegain = r0_data[1].advancegain;
+
+	if (HwAdvGain != 0) {
+		l_advancegain = HwAdvGain & 0xffff;
+		r_advancegain = (HwAdvGain >> 16) & 0xffff;
+	} else {
+		l_advancegain = r0_data[0].advancegain;
+		r_advancegain = r0_data[1].advancegain;
+	}
 	dev_dbg(dev, "%s, LR advanceGain=0x%x 0x%x\n", __func__, l_advancegain, r_advancegain);
 
 	/* set R0 and enable protection by SetParameter id 6, 7 */
diff --git a/sound/soc/codecs/rt1320-sdw.h b/sound/soc/codecs/rt1320-sdw.h
index 4a1d3fc4c8ee..a7b573883dd0 100644
--- a/sound/soc/codecs/rt1320-sdw.h
+++ b/sound/soc/codecs/rt1320-sdw.h
@@ -121,6 +121,19 @@ struct rt1320_datafixpoint {
 	int invrs;
 };
 
+typedef struct FwPara_HwSwGain {
+	unsigned int SwAdvGain;
+	unsigned int SwBasGain;
+	unsigned int HwAdvGain;
+	unsigned int HwBasGain;
+	unsigned int reserve0;
+	unsigned int reserve1;
+	unsigned int reserve2;
+	unsigned int reserve3;
+	unsigned int reserve4;
+	unsigned int reserve5;
+} __attribute__((packed)) FwPara_Get_HwSwGain;
+
 struct rt1320_paramcmd {
 	unsigned char moudleid;
 	unsigned char commandtype;
-- 
2.53.0

Re: [PATCH v3 1/2] ASoC: rt1320-sdw: kcontrol for brown-out feature update

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 522 bytes --]

On Wed, Apr 08, 2026 at 01:37:15PM +0800, jack.yu@realtek.com wrote:

> +static int rt1320_brown_out_put(struct snd_kcontrol *kcontrol,
> +				 struct snd_ctl_elem_value *ucontrol)
> +	rt1320->brown_out = ucontrol->value.integer.value[0];
> +
> +	if (rt1320->brown_out == 0)
> +		regmap_write(rt1320->regmap, 0xdb03, 0x00);
> +	else
> +		regmap_write(rt1320->regmap, 0xdb03, 0xf0);
> +
> +
> +	return 0;

This doesn't return 1 when the value changes, so you'll be missing an
event.  mixer-test should tell you about this.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]