From: Prithvi Tambewagh <activprithvi@gmail.com>
To: gregkh@linuxfoundation.org, abrahamadekunle50@gmail.com,
b9788213@gmail.com, straube.linux@gmail.com,
tmimiharoen@gmail.com, filippo.muschera@gmail.com,
ethantidmore06@gmail.com, andriy.shevchenko@linux.intel.com,
rayfraytech@gmail.com, david@cardinalsystem.net,
weibu@redadmin.org, dharanitharan725@gmail.com,
ignacio.pena87@gmail.com, dan.carpenter@linaro.org,
karanja99erick@gmail.com, luka.gejak@linux.dev,
khushalchitturi@gmail.com, suunj1331@gmail.com,
s9430939@naver.com, nikolayof23@gmail.com,
bryant.boatright@proton.me, ysinghcin@gmail.com
Cc: linux-staging@lists.linux.dev, linux-kernel@vger.kernel.org,
linux-kernel-mentees@lists.linux.dev, skhan@linuxfoundation.org,
david.hunter.linux@gmail.com, khalid@kernel.org,
Prithvi Tambewagh <activprithvi@gmail.com>
Subject: [PATCH v4 1/5] staging: rtl8723bs: move constant to right side of test in comparison
Date: Thu, 9 Apr 2026 19:20:22 +0530 [thread overview]
Message-ID: <20260409135026.137904-2-activprithvi@gmail.com> (raw)
In-Reply-To: <20260409135026.137904-1-activprithvi@gmail.com>
Move constant from the left side to the right side of the test in a
comparison, where ==, !=, <=, >=, <, > operators are used, fixing the
checkpatch warning: Comparisons should place the constant on the right
side of the test.
Signed-off-by: Prithvi Tambewagh <activprithvi@gmail.com>
---
.../staging/rtl8723bs/hal/HalBtc8723b2Ant.c | 4 ++--
drivers/staging/rtl8723bs/hal/HalPhyRf_8723B.c | 2 +-
drivers/staging/rtl8723bs/hal/hal_com.c | 2 +-
drivers/staging/rtl8723bs/hal/hal_com_phycfg.c | 4 ++--
.../staging/rtl8723bs/hal/rtl8723b_hal_init.c | 18 +++++++++---------
drivers/staging/rtl8723bs/hal/rtl8723bs_xmit.c | 2 +-
drivers/staging/rtl8723bs/include/ieee80211.h | 4 ++--
7 files changed, 18 insertions(+), 18 deletions(-)
diff --git a/drivers/staging/rtl8723bs/hal/HalBtc8723b2Ant.c b/drivers/staging/rtl8723bs/hal/HalBtc8723b2Ant.c
index d32dbf94858f..58f6cf063498 100644
--- a/drivers/staging/rtl8723bs/hal/HalBtc8723b2Ant.c
+++ b/drivers/staging/rtl8723bs/hal/HalBtc8723b2Ant.c
@@ -2211,7 +2211,7 @@ static void halbtc8723b2ant_RunCoexistMechanism(struct btc_coexist *pBtCoexist)
}
algorithm = halbtc8723b2ant_ActionAlgorithm(pBtCoexist);
- if (pCoexSta->bC2hBtInquiryPage && (BT_8723B_2ANT_COEX_ALGO_PANHS != algorithm)) {
+ if (pCoexSta->bC2hBtInquiryPage && (algorithm != BT_8723B_2ANT_COEX_ALGO_PANHS)) {
halbtc8723b2ant_ActionBtInquiry(pBtCoexist);
return;
} else {
@@ -2490,7 +2490,7 @@ void EXhalbtc8723b2ant_BtInfoNotify(
return;
}
- if (BT_INFO_SRC_8723B_2ANT_WIFI_FW != rspSource) {
+ if (rspSource != BT_INFO_SRC_8723B_2ANT_WIFI_FW) {
pCoexSta->btRetryCnt = pCoexSta->btInfoC2h[rspSource][2] & 0xf; /* [3:0] */
pCoexSta->btRssi = pCoexSta->btInfoC2h[rspSource][3] * 2 + 10;
diff --git a/drivers/staging/rtl8723bs/hal/HalPhyRf_8723B.c b/drivers/staging/rtl8723bs/hal/HalPhyRf_8723B.c
index 8f6849f2277e..0780847e287d 100644
--- a/drivers/staging/rtl8723bs/hal/HalPhyRf_8723B.c
+++ b/drivers/staging/rtl8723bs/hal/HalPhyRf_8723B.c
@@ -301,7 +301,7 @@ static void GetDeltaSwingTable_8723B(
u16 rate = *(pDM_Odm->pForcedDataRate);
u8 channel = pHalData->CurrentChannel;
- if (1 <= channel && channel <= 14) {
+ if (channel >= 1 && channel <= 14) {
if (IS_CCK_RATE(rate)) {
*TemperatureUP_A = pRFCalibrateInfo->DeltaSwingTableIdx_2GCCKA_P;
*TemperatureDOWN_A = pRFCalibrateInfo->DeltaSwingTableIdx_2GCCKA_N;
diff --git a/drivers/staging/rtl8723bs/hal/hal_com.c b/drivers/staging/rtl8723bs/hal/hal_com.c
index 728a2171fbcb..5473dca13695 100644
--- a/drivers/staging/rtl8723bs/hal/hal_com.c
+++ b/drivers/staging/rtl8723bs/hal/hal_com.c
@@ -107,7 +107,7 @@ u8 hal_com_config_channel_plan(
pHalData->bDisableSWChannelPlan = false;
chnlPlan = def_channel_plan;
- if (0xFF == hw_channel_plan)
+ if (hw_channel_plan == 0xFF)
auto_load_fail = true;
if (!auto_load_fail) {
diff --git a/drivers/staging/rtl8723bs/hal/hal_com_phycfg.c b/drivers/staging/rtl8723bs/hal/hal_com_phycfg.c
index bdd595a99b98..2746da0a9846 100644
--- a/drivers/staging/rtl8723bs/hal/hal_com_phycfg.c
+++ b/drivers/staging/rtl8723bs/hal/hal_com_phycfg.c
@@ -466,11 +466,11 @@ u8 PHY_GetTxPowerIndexBase(
if (IS_CCK_RATE(Rate))
txPower = pHalData->Index24G_CCK_Base[RFPath][chnlIdx];
- else if (MGN_6M <= Rate)
+ else if (Rate >= MGN_6M)
txPower = pHalData->Index24G_BW40_Base[RFPath][chnlIdx];
/* OFDM-1T */
- if ((MGN_6M <= Rate && Rate <= MGN_54M) && !IS_CCK_RATE(Rate))
+ if ((Rate >= MGN_6M && Rate <= MGN_54M) && !IS_CCK_RATE(Rate))
txPower += pHalData->OFDM_24G_Diff[RFPath][TX_1S];
if (BandWidth == CHANNEL_WIDTH_20) { /* BW20-1S, BW20-2S */
diff --git a/drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c b/drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c
index e794fe3caf9d..b15899580893 100644
--- a/drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c
+++ b/drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c
@@ -405,11 +405,11 @@ s32 rtl8723b_FirmwareDownload(struct adapter *padapter, bool bUsedWoWLANFw)
break;
}
_FWDownloadEnable(padapter, false);
- if (_SUCCESS != rtStatus)
+ if (rtStatus != _SUCCESS)
goto fwdl_stat;
rtStatus = _FWFreeToGo(padapter, 10, 200);
- if (_SUCCESS != rtStatus)
+ if (rtStatus != _SUCCESS)
goto fwdl_stat;
fwdl_stat:
@@ -1165,15 +1165,15 @@ s32 rtl8723b_InitLLTTable(struct adapter *padapter)
static void hal_get_chnl_group_8723b(u8 channel, u8 *group)
{
- if (1 <= channel && channel <= 2)
+ if (channel >= 1 && channel <= 2)
*group = 0;
- else if (3 <= channel && channel <= 5)
+ else if (channel >= 3 && channel <= 5)
*group = 1;
- else if (6 <= channel && channel <= 8)
+ else if (channel >= 6 && channel <= 8)
*group = 2;
- else if (9 <= channel && channel <= 11)
+ else if (channel >= 9 && channel <= 11)
*group = 3;
- else if (12 <= channel && channel <= 14)
+ else if (channel >= 12 && channel <= 14)
*group = 4;
}
@@ -1221,7 +1221,7 @@ static void Hal_ReadPowerValueFromPROM_8723B(
memset(pwrInfo24G, 0, sizeof(struct TxPowerInfo24G));
- if (0xFF == PROMContent[eeAddr+1])
+ if (PROMContent[eeAddr+1] == 0xFF)
AutoLoadFail = true;
if (AutoLoadFail) {
@@ -2037,7 +2037,7 @@ static void hw_var_set_bcn_func(struct adapter *padapter, u8 variable, u8 *val)
val8 &= ~(EN_BCN_FUNCTION | EN_TXBCN_RPT);
/* Always enable port0 beacon function for PSTDMA */
- if (REG_BCN_CTRL == bcn_ctrl_reg)
+ if (bcn_ctrl_reg == REG_BCN_CTRL)
val8 |= EN_BCN_FUNCTION;
rtw_write8(padapter, bcn_ctrl_reg, val8);
diff --git a/drivers/staging/rtl8723bs/hal/rtl8723bs_xmit.c b/drivers/staging/rtl8723bs/hal/rtl8723bs_xmit.c
index f50726d2ed0c..ff39077deb69 100644
--- a/drivers/staging/rtl8723bs/hal/rtl8723bs_xmit.c
+++ b/drivers/staging/rtl8723bs/hal/rtl8723bs_xmit.c
@@ -415,7 +415,7 @@ int rtl8723bs_xmit_thread(void *context)
if (signal_pending(current)) {
flush_signals(current);
}
- } while (_SUCCESS == ret);
+ } while (ret == _SUCCESS);
complete(&pxmitpriv->SdioXmitTerminate);
diff --git a/drivers/staging/rtl8723bs/include/ieee80211.h b/drivers/staging/rtl8723bs/include/ieee80211.h
index fbb12fe31a6c..a3f519e2f6d2 100644
--- a/drivers/staging/rtl8723bs/include/ieee80211.h
+++ b/drivers/staging/rtl8723bs/include/ieee80211.h
@@ -394,8 +394,8 @@ enum {
};
#define IS_HT_RATE(_rate) (_rate >= MGN_MCS0 && _rate <= MGN_MCS31)
-#define IS_CCK_RATE(_rate) (MGN_1M == _rate || _rate == MGN_2M || _rate == MGN_5_5M || _rate == MGN_11M)
-#define IS_OFDM_RATE(_rate) (MGN_6M <= _rate && _rate <= MGN_54M && _rate != MGN_11M)
+#define IS_CCK_RATE(_rate) (_rate == MGN_1M || _rate == MGN_2M || _rate == MGN_5_5M || _rate == MGN_11M)
+#define IS_OFDM_RATE(_rate) (_rate >= MGN_6M && _rate <= MGN_54M && _rate != MGN_11M)
/* NOTE: This data is for statistical purposes; not all hardware provides this
--
2.34.1
next prev parent reply other threads:[~2026-04-09 13:50 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-09 13:50 [PATCH v4 0/5] staging: rtl8723bs: Code cleanup in drivers/staging/rtl8723bs Prithvi Tambewagh
2026-04-09 13:50 ` Prithvi Tambewagh [this message]
2026-04-09 14:10 ` [PATCH v4 1/5] staging: rtl8723bs: move constant to right side of test in comparison Luka Gejak
2026-04-09 13:50 ` [PATCH v4 2/5] staging: rtl8723bs: remove empty if statement block Prithvi Tambewagh
2026-04-09 14:10 ` Luka Gejak
2026-04-09 13:50 ` [PATCH v4 3/5] staging: rtl8723bs: simplify boolean return in IsFrameTypeCtrl() Prithvi Tambewagh
2026-04-09 14:10 ` Luka Gejak
2026-04-09 13:50 ` [PATCH v4 4/5] staging: rtl8723bs: use read_poll_timeout_atomic in _is_fw_read_cmd_down Prithvi Tambewagh
2026-04-09 14:10 ` Luka Gejak
2026-04-09 13:50 ` [PATCH v4 5/5] staging: rtl8723bs: remove duplicate rate checks in PHY_GetTxPowerIndexBase() Prithvi Tambewagh
2026-04-09 14:14 ` Luka Gejak
2026-04-09 14:18 ` [PATCH v4 0/5] staging: rtl8723bs: Code cleanup in drivers/staging/rtl8723bs Luka Gejak
2026-04-09 14:50 ` Prithvi
2026-04-09 14:57 ` Luka Gejak
2026-04-09 15:30 ` Prithvi
2026-04-09 15:32 ` Luka Gejak
2026-04-09 15:42 ` Luka Gejak
2026-04-09 15:02 ` Greg KH
2026-04-09 15:39 ` Prithvi
2026-04-09 15:44 ` Luka Gejak
2026-04-09 15:55 ` Andy Shevchenko
2026-04-14 6:15 ` Prithvi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260409135026.137904-2-activprithvi@gmail.com \
--to=activprithvi@gmail.com \
--cc=abrahamadekunle50@gmail.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=b9788213@gmail.com \
--cc=bryant.boatright@proton.me \
--cc=dan.carpenter@linaro.org \
--cc=david.hunter.linux@gmail.com \
--cc=david@cardinalsystem.net \
--cc=dharanitharan725@gmail.com \
--cc=ethantidmore06@gmail.com \
--cc=filippo.muschera@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=ignacio.pena87@gmail.com \
--cc=karanja99erick@gmail.com \
--cc=khalid@kernel.org \
--cc=khushalchitturi@gmail.com \
--cc=linux-kernel-mentees@lists.linux.dev \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-staging@lists.linux.dev \
--cc=luka.gejak@linux.dev \
--cc=nikolayof23@gmail.com \
--cc=rayfraytech@gmail.com \
--cc=s9430939@naver.com \
--cc=skhan@linuxfoundation.org \
--cc=straube.linux@gmail.com \
--cc=suunj1331@gmail.com \
--cc=tmimiharoen@gmail.com \
--cc=weibu@redadmin.org \
--cc=ysinghcin@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.