[PATCH v5 0/3] usb: gadget: rcar: Add RZ/G2L support and lifecycle fixes

[PATCH v5 0/3] usb: gadget: rcar: Add RZ/G2L support and lifecycle fixes

[Michele Bisogno]

This series adds support for the Renesas RZ/G2L (R9A07G044) USBHS
controller. During development, several lifecycle and resource 
management issues were identified and addressed to satisfy RZ/G2L 
hardware requirements and prevent resource leaks across the driver.

The series is split into three logical parts to ensure bisectability:
1. A bugfix for the gadget deletion sequence during driver remove.
2. The addition of reset controller infrastructure and proper 
   clock/reset teardown logic.
3. The RZ/G2L specific hardware parameters, SYSCFG logic, and 
   compatible strings.

Changes in v5:
- Simplified usbhs_probe() signature to only take struct udevice *dev,
  deriving private data internally as requested.
- Fixed resource leak in usbhs_udc_otg_probe() error paths by adding 
  reset_assert_bulk() to the teardown sequence.
- Standardized resource management by ensuring the probe error path 
  perfectly mirrors the removal path.

Changes in v4:
- Split the monolithic patch into a 3-patch series as requested.
- Added usb_del_gadget_udc() to fix resource leak on driver remove.
- Implemented bulk reset controller support (required for RZ/G2L).
- Improved error handling in probe() to ensure clocks are disabled 
  if reset initialization or deassertion fails.
- Moved reset and clock handles to private data to ensure persistence.
- Reorganized hunks to ensure each patch in the series compiles 
  independently (bisectability).


Michele Bisogno (3):
  usb: gadget: rcar: Fix gadget registration lifecycle in remove
  usb: gadget: rcar: Add support for reset controller
  usb: gadget: rcar: Add support for RZ/G2L (R9A07G044)

 drivers/usb/gadget/rcar/common.c      | 58 +++++++++++++++++++++++----
 drivers/usb/gadget/rcar/renesas_usb.h |  1 +
 2 files changed, 52 insertions(+), 7 deletions(-)

-- 
2.34.1

[PATCH v5 1/3] usb: gadget: rcar: Fix gadget registration lifecycle in remove

[Michele Bisogno]

The driver currently fails to unregister the USB gadget when the
device is removed or the driver is unbound. This leads to dangling
pointers in the UDC core and potential memory corruption.

Add a call to usb_del_gadget_udc() in the remove path to ensure
a clean teardown of the gadget interface.

Signed-off-by: Michele Bisogno <micbis.openwrt@gmail.com>
---
 drivers/usb/gadget/rcar/common.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/usb/gadget/rcar/common.c b/drivers/usb/gadget/rcar/common.c
index 2ba022a3f2c..d40d6736a54 100644
--- a/drivers/usb/gadget/rcar/common.c
+++ b/drivers/usb/gadget/rcar/common.c
@@ -447,8 +447,11 @@ err_clk:
 static int usbhs_udc_otg_remove(struct udevice *dev)
 {
 	struct usbhs_priv_otg_data *priv = dev_get_priv(dev);
+	struct usb_gadget *gadget;
 
 	usbhs_rcar3_power_ctrl(&priv->usbhs_priv, false);
+	gadget = usbhsg_get_gadget(&priv->usbhs_priv);
+	usb_del_gadget_udc(gadget);
 	usbhs_mod_remove(&priv->usbhs_priv);
 	usbhs_fifo_remove(&priv->usbhs_priv);
 	usbhs_pipe_remove(&priv->usbhs_priv);
-- 
2.34.1

[PATCH v5 2/3] usb: gadget: rcar: Add support for reset controller

[Michele Bisogno]

Some Renesas SoCs, such as the RZ/G2L, require the USBHS core to
be explicitly deasserted from reset before register access is
possible.

Update the OTG probe to handle a bulk reset controller. To maintain
hardware stability, the reset is deasserted after clocks are
enabled in probe(), and asserted before clocks are disabled
in remove().

Update the error paths in probe to ensures clocks are disabled
if the reset initialization fails.

Signed-off-by: Michele Bisogno <micbis.openwrt@gmail.com>
---
 drivers/usb/gadget/rcar/common.c | 35 +++++++++++++++++++++++++-------
 1 file changed, 28 insertions(+), 7 deletions(-)

diff --git a/drivers/usb/gadget/rcar/common.c b/drivers/usb/gadget/rcar/common.c
index d40d6736a54..32c4f1fadb1 100644
--- a/drivers/usb/gadget/rcar/common.c
+++ b/drivers/usb/gadget/rcar/common.c
@@ -16,6 +16,7 @@
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
 #include <usb.h>
+#include <reset.h>
 
 #include "common.h"
 
@@ -290,6 +291,9 @@ struct usbhs_priv_otg_data {
 	void __iomem		*base;
 	void __iomem		*phybase;
 
+	struct clk_bulk clk_bulk;
+	struct reset_ctl_bulk reset_bulk;
+
 	struct platform_device	usbhs_dev;
 	struct usbhs_priv	usbhs_priv;
 
@@ -355,8 +359,10 @@ static int usbhs_udc_otg_gadget_handle_interrupts(struct udevice *dev)
 	return 0;
 }
 
-static int usbhs_probe(struct usbhs_priv *priv)
+static int usbhs_probe(struct udevice *dev)
 {
+	struct usbhs_priv_otg_data *otg_priv = dev_get_priv(dev);
+	struct usbhs_priv *priv = &otg_priv->usbhs_priv;
 	int ret;
 
 	priv->dparam.type = USBHS_TYPE_RCAR_GEN3;
@@ -396,34 +402,41 @@ static int usbhs_udc_otg_probe(struct udevice *dev)
 {
 	struct usbhs_priv_otg_data *priv = dev_get_priv(dev);
 	struct usb_gadget *gadget;
-	struct clk_bulk clk_bulk;
 	int ret = -EINVAL;
 
 	priv->base = dev_read_addr_ptr(dev);
 	if (!priv->base)
 		return -EINVAL;
 
-	ret = clk_get_bulk(dev, &clk_bulk);
+	ret = clk_get_bulk(dev, &priv->clk_bulk);
 	if (ret)
 		return ret;
 
-	ret = clk_enable_bulk(&clk_bulk);
+	ret = clk_enable_bulk(&priv->clk_bulk);
 	if (ret)
 		return ret;
 
+	ret = reset_get_bulk(dev, &priv->reset_bulk);
+	if (ret)
+		goto err_clk;
+
+	ret = reset_deassert_bulk(&priv->reset_bulk);
+	if (ret)
+		goto err_clk;
+
 	clrsetbits_le32(priv->base + UGCTRL2, UGCTRL2_USB0SEL_MASK, UGCTRL2_USB0SEL_EHCI);
 	clrsetbits_le16(priv->base + LPSTS, LPSTS_SUSPM, LPSTS_SUSPM);
 
 	ret = generic_setup_phy(dev, &priv->phy, 0, PHY_MODE_USB_OTG, 1);
 	if (ret)
-		goto err_clk;
+		goto err_reset;
 
 	priv->phybase = dev_read_addr_ptr(priv->phy.dev);
 
 	priv->usbhs_priv.pdev = &priv->usbhs_dev;
 	priv->usbhs_priv.base = priv->base;
 	priv->usbhs_dev.dev.driver_data = &priv->usbhs_priv;
-	ret = usbhs_probe(&priv->usbhs_priv);
+	ret = usbhs_probe(dev);
 	if (ret < 0)
 		goto err_phy;
 
@@ -439,8 +452,10 @@ static int usbhs_udc_otg_probe(struct udevice *dev)
 
 err_phy:
 	generic_shutdown_phy(&priv->phy);
+err_reset:
+	reset_assert_bulk(&priv->reset_bulk);
 err_clk:
-	clk_disable_bulk(&clk_bulk);
+	clk_disable_bulk(&priv->clk_bulk);
 	return ret;
 }
 
@@ -456,6 +471,12 @@ static int usbhs_udc_otg_remove(struct udevice *dev)
 	usbhs_fifo_remove(&priv->usbhs_priv);
 	usbhs_pipe_remove(&priv->usbhs_priv);
 
+	reset_assert_bulk(&priv->reset_bulk);
+	reset_release_bulk(&priv->reset_bulk);
+
+	clk_disable_bulk(&priv->clk_bulk);
+	clk_release_bulk(&priv->clk_bulk);
+
 	generic_shutdown_phy(&priv->phy);
 
 	return dm_scan_fdt_dev(dev);
-- 
2.34.1

[PATCH v5 3/3] usb: gadget: rcar: Add support for RZ/G2L (R9A07G044)

[Michele Bisogno]

The Renesas RZ/G2L (and RZ/G2LC) USBHS controller requires the
CNEN bit in the SYSCFG register to be set for function operation.
Additionally, its CFIFO is byte-addressable.

Introduce a new renesas_usbhs_driver_param structure for the
RZ/G2L SoC and link it via the udevice_id data pointer. Update
usbhs_probe() to accept the udevice pointer to retrieve these
parameters during initialization.

This alignment follows the logic used in the Linux kernel
renesas_usbhs driver.

Signed-off-by: Michele Bisogno <micbis.openwrt@gmail.com>
---
 drivers/usb/gadget/rcar/common.c      | 20 ++++++++++++++++++++
 drivers/usb/gadget/rcar/renesas_usb.h |  1 +
 2 files changed, 21 insertions(+)

diff --git a/drivers/usb/gadget/rcar/common.c b/drivers/usb/gadget/rcar/common.c
index 32c4f1fadb1..580a0fbf090 100644
--- a/drivers/usb/gadget/rcar/common.c
+++ b/drivers/usb/gadget/rcar/common.c
@@ -92,6 +92,12 @@ void usbhs_sys_function_ctrl(struct usbhs_priv *priv, int enable)
 	u16 mask = DCFM | DRPD | DPRPU | HSE | USBE;
 	u16 val  = HSE | USBE;
 
+	/* CNEN bit is required for function operation */
+	if (usbhs_get_dparam(priv, has_cnen)) {
+		mask |= CNEN;
+		val  |= CNEN;
+	}
+
 	/*
 	 * if enable
 	 *
@@ -363,13 +369,21 @@ static int usbhs_probe(struct udevice *dev)
 {
 	struct usbhs_priv_otg_data *otg_priv = dev_get_priv(dev);
 	struct usbhs_priv *priv = &otg_priv->usbhs_priv;
+	struct renesas_usbhs_driver_param *plat_param;
 	int ret;
 
+	plat_param = (struct renesas_usbhs_driver_param *)dev_get_driver_data(dev);
+
 	priv->dparam.type = USBHS_TYPE_RCAR_GEN3;
 	priv->dparam.pio_dma_border = 64;
 	priv->dparam.pipe_configs = usbhsc_new_pipe;
 	priv->dparam.pipe_size = ARRAY_SIZE(usbhsc_new_pipe);
 
+	if (plat_param) {
+		priv->dparam.has_cnen		= plat_param->has_cnen;
+		priv->dparam.cfifo_byte_addr	= plat_param->cfifo_byte_addr;
+	}
+
 	/* call pipe and module init */
 	ret = usbhs_pipe_probe(priv);
 	if (ret < 0)
@@ -482,8 +496,14 @@ static int usbhs_udc_otg_remove(struct udevice *dev)
 	return dm_scan_fdt_dev(dev);
 }
 
+static struct renesas_usbhs_driver_param rzg2l_param = {
+	.has_cnen = 1,
+	.cfifo_byte_addr = 1,
+};
+
 static const struct udevice_id usbhs_udc_otg_ids[] = {
 	{ .compatible = "renesas,rcar-gen3-usbhs" },
+	{ .compatible = "renesas,rzg2l-usbhs", .data = (unsigned long)&rzg2l_param },
 	{},
 };
 
diff --git a/drivers/usb/gadget/rcar/renesas_usb.h b/drivers/usb/gadget/rcar/renesas_usb.h
index 8155e3dcaf6..140a70251cf 100644
--- a/drivers/usb/gadget/rcar/renesas_usb.h
+++ b/drivers/usb/gadget/rcar/renesas_usb.h
@@ -111,6 +111,7 @@ struct renesas_usbhs_driver_param {
 	u32 has_otg:1; /* for controlling PWEN/EXTLP */
 	u32 has_sudmac:1; /* for SUDMAC */
 	u32 has_usb_dmac:1; /* for USB-DMAC */
+	u32 has_cnen:1;
 	u32 cfifo_byte_addr:1; /* CFIFO is byte addressable */
 #define USBHS_USB_DMAC_XFER_SIZE	32	/* hardcode the xfer size */
 	u32 multi_clks:1;
-- 
2.34.1

Re: [PATCH v5 2/3] usb: gadget: rcar: Add support for reset controller

[Michele Bisogno]

On Fri, 24 Apr 2026 at 07:34, Marek Vasut <marek.vasut@mailbox.org> wrote:
>
> >   #include <linux/usb/ch9.h>
> >   #include <linux/usb/gadget.h>
> >   #include <usb.h>
> > +#include <reset.h>
>
> Please keep the header list sorted.

Ops, OK!

> >   #include "common.h"
>
> [...]
>
> clk_enable_bulk() needs to jump to err_clock_enable() on failure, this
> is a bug in the existing driver .
>
> > +     ret = reset_get_bulk(dev, &priv->reset_bulk);
> > +     if (ret)
> > +             goto err_clk;
> > +
> > +     ret = reset_deassert_bulk(&priv->reset_bulk);
> > +     if (ret)
> > +             goto err_clk;
>
> This has to jump to fail path which does reset_release_bulk() , i.e.
>
>                 goto err_reset_deassert;

OK!

> >       clrsetbits_le32(priv->base + UGCTRL2, UGCTRL2_USB0SEL_MASK, UGCTRL2_USB0SEL_EHCI);
> >       clrsetbits_le16(priv->base + LPSTS, LPSTS_SUSPM, LPSTS_SUSPM);
> >
> >       ret = generic_setup_phy(dev, &priv->phy, 0, PHY_MODE_USB_OTG, 1);
> >       if (ret)
> > -             goto err_clk;
> > +             goto err_reset;
> >
> >       priv->phybase = dev_read_addr_ptr(priv->phy.dev);
> >
> >       priv->usbhs_priv.pdev = &priv->usbhs_dev;
> >       priv->usbhs_priv.base = priv->base;
> >       priv->usbhs_dev.dev.driver_data = &priv->usbhs_priv;
> > -     ret = usbhs_probe(&priv->usbhs_priv);
> > +     ret = usbhs_probe(dev);
> >       if (ret < 0)
> >               goto err_phy;
> >
> > @@ -439,8 +452,10 @@ static int usbhs_udc_otg_probe(struct udevice *dev)
> >
> >   err_phy:
> >       generic_shutdown_phy(&priv->phy);
> > +err_reset:
> > +     reset_assert_bulk(&priv->reset_bulk);
>
> err_reset_deassert:
>         reset_release_bulk(&priv->reset_bulk);

Alright.

> >   err_clk:
> > -     clk_disable_bulk(&clk_bulk);
> > +     clk_disable_bulk(&priv->clk_bulk);
>
>
> err_clk_enable:
>         clk_release_bulk(&priv->clk_bulk);

OK.

> >       return ret;
> >   }
> >
> > @@ -456,6 +471,12 @@ static int usbhs_udc_otg_remove(struct udevice *dev)
> >       usbhs_fifo_remove(&priv->usbhs_priv);
> >       usbhs_pipe_remove(&priv->usbhs_priv);
> >
> > +     reset_assert_bulk(&priv->reset_bulk);
> > +     reset_release_bulk(&priv->reset_bulk);
> > +
> > +     clk_disable_bulk(&priv->clk_bulk);
> > +     clk_release_bulk(&priv->clk_bulk);
> > +
> >       generic_shutdown_phy(&priv->phy);
> >
> >       return dm_scan_fdt_dev(dev);
>
> Thank you for your help!

Thanks for your patience! :)

Re: [PATCH v5 3/3] usb: gadget: rcar: Add support for RZ/G2L (R9A07G044)

[Michele Bisogno]

> Please keep the RB tag from previous round.
>
> Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>

Will do.