[PATCH v3 0/3] gpio: Add EIO GPIO support

[PATCH v3 0/3] gpio: Add EIO GPIO support

[Shubhrajyoti Datta]

Add the EIO GPIO support.
Add the dt description and the compatible to the driver.

Changes in v3:
- Update the commit message

Changes in v2:
- Add new patch to sort the compatible strings alphabetically
- Add description of EIO block

Shubhrajyoti Datta (3):
  dt-bindings: gpio: zynq: Sort compatible strings alphabetically
  dt-bindings: gpio: Add EIO GPIO compatible to gpio-zynq
  gpio: zynq: Add eio gpio support

 .../devicetree/bindings/gpio/gpio-zynq.yaml    | 18 +++++++++++++++---
 drivers/gpio/gpio-zynq.c                       | 12 ++++++++++++
 2 files changed, 27 insertions(+), 3 deletions(-)

-- 
2.34.1

[PATCH v3 1/3] dt-bindings: gpio: zynq: Sort compatible strings alphabetically

[Shubhrajyoti Datta]

Sort the compatible string alphabetically.

Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
---

(no changes since v2)

Changes in v2:
- Add new patch to sort the compatible strings alphabetically

 Documentation/devicetree/bindings/gpio/gpio-zynq.yaml | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/gpio/gpio-zynq.yaml b/Documentation/devicetree/bindings/gpio/gpio-zynq.yaml
index 5e2496379a3c..30a7f836c341 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-zynq.yaml
+++ b/Documentation/devicetree/bindings/gpio/gpio-zynq.yaml
@@ -12,10 +12,10 @@ maintainers:
 properties:
   compatible:
     enum:
+      - xlnx,pmc-gpio-1.0
+      - xlnx,versal-gpio-1.0
       - xlnx,zynq-gpio-1.0
       - xlnx,zynqmp-gpio-1.0
-      - xlnx,versal-gpio-1.0
-      - xlnx,pmc-gpio-1.0
 
   reg:
     maxItems: 1
-- 
2.34.1

Re: [PATCH v3 1/3] dt-bindings: gpio: zynq: Sort compatible strings alphabetically

[Rob Herring]

On Tue, Apr 21, 2026 at 04:13:56PM +0530, Shubhrajyoti Datta wrote:
> Sort the compatible string alphabetically.
> 
> Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>

Missing Conor's ack.

[PATCH v3 2/3] dt-bindings: gpio: Add EIO GPIO compatible to gpio-zynq

[Shubhrajyoti Datta]

EIO (Extended IO) GPIO is a Xilinx IP block that exposes
multiplexed I/O pins through an EIO interface.

The EIO GPIO block has 2 banks with 26 GPIOs each (52 total).
The GPIO width cannot be determined from the hardware registers,
the driver relies on the compatible string to select the correct
bank/pin configuration. A new compatible is therefore required.

The block is currently present on xa2ve3288 silicon.
The compatible string uses version 1.0 matching the IP core version.

Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
---

Changes in v3:
- Update the commit message

Changes in v2:
- Add description of EIO block

 .../devicetree/bindings/gpio/gpio-zynq.yaml        | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/gpio/gpio-zynq.yaml b/Documentation/devicetree/bindings/gpio/gpio-zynq.yaml
index 30a7f836c341..1ca067217509 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-zynq.yaml
+++ b/Documentation/devicetree/bindings/gpio/gpio-zynq.yaml
@@ -12,6 +12,7 @@ maintainers:
 properties:
   compatible:
     enum:
+      - xlnx,eio-gpio-1.0
       - xlnx,pmc-gpio-1.0
       - xlnx,versal-gpio-1.0
       - xlnx,zynq-gpio-1.0
@@ -30,7 +31,7 @@ properties:
 
   gpio-line-names:
     description: strings describing the names of each gpio line
-    minItems: 58
+    minItems: 52
     maxItems: 174
 
   interrupt-controller: true
@@ -89,6 +90,17 @@ allOf:
           minItems: 116
           maxItems: 116
 
+  - if:
+      properties:
+        compatible:
+          enum:
+            - xlnx,eio-gpio-1.0
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 52
+          maxItems: 52
+
 required:
   - compatible
   - reg
-- 
2.34.1

Re: [PATCH v3 2/3] dt-bindings: gpio: Add EIO GPIO compatible to gpio-zynq

[Rob Herring]

On Tue, Apr 21, 2026 at 04:13:57PM +0530, Shubhrajyoti Datta wrote:
> EIO (Extended IO) GPIO is a Xilinx IP block that exposes
> multiplexed I/O pins through an EIO interface.
> 
> The EIO GPIO block has 2 banks with 26 GPIOs each (52 total).
> The GPIO width cannot be determined from the hardware registers,
> the driver relies on the compatible string to select the correct
> bank/pin configuration. A new compatible is therefore required.
> 
> The block is currently present on xa2ve3288 silicon.
> The compatible string uses version 1.0 matching the IP core version.
> 
> Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
> ---
> 
> Changes in v3:
> - Update the commit message
> 
> Changes in v2:
> - Add description of EIO block
> 
>  .../devicetree/bindings/gpio/gpio-zynq.yaml        | 14 +++++++++++++-
>  1 file changed, 13 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/gpio/gpio-zynq.yaml b/Documentation/devicetree/bindings/gpio/gpio-zynq.yaml
> index 30a7f836c341..1ca067217509 100644
> --- a/Documentation/devicetree/bindings/gpio/gpio-zynq.yaml
> +++ b/Documentation/devicetree/bindings/gpio/gpio-zynq.yaml
> @@ -12,6 +12,7 @@ maintainers:
>  properties:
>    compatible:
>      enum:
> +      - xlnx,eio-gpio-1.0
>        - xlnx,pmc-gpio-1.0
>        - xlnx,versal-gpio-1.0
>        - xlnx,zynq-gpio-1.0
> @@ -30,7 +31,7 @@ properties:
>  
>    gpio-line-names:
>      description: strings describing the names of each gpio line
> -    minItems: 58
> +    minItems: 52
>      maxItems: 174
>  
>    interrupt-controller: true
> @@ -89,6 +90,17 @@ allOf:
>            minItems: 116
>            maxItems: 116
>  
> +  - if:
> +      properties:
> +        compatible:
> +          enum:
> +            - xlnx,eio-gpio-1.0
> +    then:
> +      properties:
> +        gpio-line-names:
> +          minItems: 52

The min is already 52, so you can drop this. With that,

Acked-by: Rob Herring (Arm) <robh@kernel.org>

> +          maxItems: 52
> +
>  required:
>    - compatible
>    - reg
> -- 
> 2.34.1
> 

[PATCH v3 3/3] gpio: zynq: Add eio gpio support

[Shubhrajyoti Datta]

Add support for the EIO GPIO controller found on
xa2ve3288 silicon.

The EIO GPIO block provides access to multiplexed I/O pins exposed
through the EIO interface. Only bank 0 and bank 1 are connected to
external MIO pins, with 26 GPIOs per bank (52 GPIOs total). This
change extends the Zynq GPIO driver to support the EIO GPIO
variant.

Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
---

(no changes since v1)

 drivers/gpio/gpio-zynq.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/gpio/gpio-zynq.c b/drivers/gpio/gpio-zynq.c
index 571e366624d2..8118ae3412c2 100644
--- a/drivers/gpio/gpio-zynq.c
+++ b/drivers/gpio/gpio-zynq.c
@@ -25,6 +25,7 @@
 #define VERSAL_GPIO_MAX_BANK	4
 #define PMC_GPIO_MAX_BANK	5
 #define VERSAL_UNUSED_BANKS	2
+#define EIO_GPIO_MAX_BANK	2
 
 #define ZYNQ_GPIO_BANK0_NGPIO	32
 #define ZYNQ_GPIO_BANK1_NGPIO	22
@@ -818,6 +819,16 @@ static const struct dev_pm_ops zynq_gpio_dev_pm_ops = {
 	RUNTIME_PM_OPS(zynq_gpio_runtime_suspend, zynq_gpio_runtime_resume, NULL)
 };
 
+static const struct zynq_platform_data eio_gpio_def = {
+	.label = "eio_gpio",
+	.ngpio = 52,
+	.max_bank = EIO_GPIO_MAX_BANK,
+	.bank_min[0] = 0,
+	.bank_max[0] = 25, /* 0 to 25 are connected to MIOs (26 pins) */
+	.bank_min[1] = 26,
+	.bank_max[1] = 51, /* Bank 1 are connected to MIOs (26 pins) */
+};
+
 static const struct zynq_platform_data versal_gpio_def = {
 	.label = "versal_gpio",
 	.quirks = GPIO_QUIRK_VERSAL,
@@ -882,6 +893,7 @@ static const struct of_device_id zynq_gpio_of_match[] = {
 	{ .compatible = "xlnx,zynqmp-gpio-1.0", .data = &zynqmp_gpio_def },
 	{ .compatible = "xlnx,versal-gpio-1.0", .data = &versal_gpio_def },
 	{ .compatible = "xlnx,pmc-gpio-1.0", .data = &pmc_gpio_def },
+	{ .compatible = "xlnx,eio-gpio-1.0", .data = &eio_gpio_def },
 	{ /* end of table */ }
 };
 MODULE_DEVICE_TABLE(of, zynq_gpio_of_match);
-- 
2.34.1

Re: [PATCH v3 0/3] gpio: Add EIO GPIO support

[Linus Walleij]

On Tue, Apr 21, 2026 at 12:44 PM Shubhrajyoti Datta
<shubhrajyoti.datta@amd.com> wrote:

> Add the EIO GPIO support.
> Add the dt description and the compatible to the driver.

The series:
Reviewed-by: Linus Walleij <linusw@kernel.org>

Yours,
Linus Walleij