From: <sukhdeeps@marvell.com>
To: <netdev@vger.kernel.org>
Cc: <irusskikh@marvell.com>, <epomozov@marvell.com>,
<richardcochran@gmail.com>, <andrew+netdev@lunn.ch>,
<davem@davemloft.net>, <edumazet@google.com>, <kuba@kernel.org>,
<pabeni@redhat.com>, <linux-kernel@vger.kernel.org>,
Sukhdeep Singh <sukhdeeps@marvell.com>
Subject: [PATCH net-next 3/9] net: atlantic: decouple aq_set_data_fl3l4() from driver internals driver internals
Date: Wed, 6 May 2026 19:27:00 +0530 [thread overview]
Message-ID: <20260506135706.2834-4-sukhdeeps@marvell.com> (raw)
In-Reply-To: <20260506135706.2834-1-sukhdeeps@marvell.com>
From: Sukhdeep Singh <sukhdeeps@marvell.com>
Refactor aq_set_data_fl3l4() to take an ethtool_rx_flow_spec pointer and
an explicit HW register location instead of driver-internal structures
(aq_nic_s, aq_rx_filter). This makes the function reusable for PTP
filter setup which constructs flow specs independently.
Key changes:
- Add aq_is_ipv6_flow_type() helper to derive IPv6 status from the
flow_type field, replacing the dependency on rx_fltrs->fl3l4.is_ipv6
shared state.
- Change aq_set_data_fl3l4() signature to accept (fsp, data, location,
add) and export it via aq_filters.h.
- Update aq_add_del_fl3l4() to compute the HW register location and
pass it explicitly.
Signed-off-by: Sukhdeep Singh <sukhdeeps@marvell.com>
---
.../ethernet/aquantia/atlantic/aq_filters.c | 31 ++++++++++++++-----
.../ethernet/aquantia/atlantic/aq_filters.h | 3 ++
2 files changed, 26 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_filters.c b/drivers/net/ethernet/aquantia/atlantic/aq_filters.c
index 150a0b1af26a..4be7b629bfac 100644
--- a/drivers/net/ethernet/aquantia/atlantic/aq_filters.c
+++ b/drivers/net/ethernet/aquantia/atlantic/aq_filters.c
@@ -181,6 +181,20 @@ aq_check_approve_fvlan(struct aq_nic_s *aq_nic,
return 0;
}
+static bool aq_is_ipv6_flow_type(const struct ethtool_rx_flow_spec *fsp)
+{
+ switch (fsp->flow_type & ~FLOW_EXT) {
+ case TCP_V6_FLOW:
+ case UDP_V6_FLOW:
+ case SCTP_V6_FLOW:
+ case IPV6_FLOW:
+ case IPV6_USER_FLOW:
+ return true;
+ default:
+ return false;
+ }
+}
+
static int __must_check
aq_check_filter(struct aq_nic_s *aq_nic,
struct ethtool_rx_flow_spec *fsp)
@@ -466,18 +480,16 @@ static int aq_add_del_fvlan(struct aq_nic_s *aq_nic,
return aq_filters_vlans_update(aq_nic);
}
-static int aq_set_data_fl3l4(struct aq_nic_s *aq_nic,
- struct aq_rx_filter *aq_rx_fltr,
- struct aq_rx_filter_l3l4 *data, bool add)
+int aq_set_data_fl3l4(const struct ethtool_rx_flow_spec *fsp,
+ struct aq_rx_filter_l3l4 *data,
+ int location, bool add)
{
- struct aq_hw_rx_fltrs_s *rx_fltrs = aq_get_hw_rx_fltrs(aq_nic);
- const struct ethtool_rx_flow_spec *fsp = &aq_rx_fltr->aq_fsp;
u32 flow = fsp->flow_type & ~FLOW_EXT;
memset(data, 0, sizeof(*data));
- data->is_ipv6 = rx_fltrs->fl3l4.is_ipv6;
- data->location = HW_ATL_GET_REG_LOCATION_FL3L4(fsp->location);
+ data->is_ipv6 = aq_is_ipv6_flow_type(fsp);
+ data->location = location;
if (!add)
return 0;
@@ -569,13 +581,16 @@ static int aq_add_del_fl3l4(struct aq_nic_s *aq_nic,
const struct aq_hw_ops *aq_hw_ops = aq_nic->aq_hw_ops;
struct aq_hw_s *aq_hw = aq_nic->aq_hw;
struct aq_rx_filter_l3l4 data;
+ int location;
int err;
if (unlikely(aq_rx_fltr->aq_fsp.location < AQ_RX_FIRST_LOC_FL3L4 ||
aq_rx_fltr->aq_fsp.location > AQ_RX_LAST_LOC_FL3L4))
return -EINVAL;
- aq_set_data_fl3l4(aq_nic, aq_rx_fltr, &data, add);
+ location = HW_ATL_GET_REG_LOCATION_FL3L4(aq_rx_fltr->aq_fsp.location);
+
+ aq_set_data_fl3l4(&aq_rx_fltr->aq_fsp, &data, location, add);
err = aq_set_fl3l4(aq_hw, aq_hw_ops, &data);
if (err)
diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_filters.h b/drivers/net/ethernet/aquantia/atlantic/aq_filters.h
index 122e06c88a33..96e89c8e52d0 100644
--- a/drivers/net/ethernet/aquantia/atlantic/aq_filters.h
+++ b/drivers/net/ethernet/aquantia/atlantic/aq_filters.h
@@ -32,5 +32,8 @@ int aq_clear_rxnfc_all_rules(struct aq_nic_s *aq_nic);
int aq_reapply_rxnfc_all_rules(struct aq_nic_s *aq_nic);
int aq_filters_vlans_update(struct aq_nic_s *aq_nic);
int aq_filters_vlan_offload_off(struct aq_nic_s *aq_nic);
+int aq_set_data_fl3l4(const struct ethtool_rx_flow_spec *fsp,
+ struct aq_rx_filter_l3l4 *data,
+ int location, bool add);
#endif /* AQ_FILTERS_H */
--
2.43.0
next prev parent reply other threads:[~2026-05-06 13:58 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-06 13:56 [PATCH net-next 0/9] net: atlantic: add PTP support for AQC113 (Antigua) sukhdeeps
2026-05-06 13:56 ` [PATCH net-next 1/9] net: atlantic: correct L3L4 filter flow_type masking and IPv6 handling masking and IPv6 handling sukhdeeps
2026-05-06 13:56 ` [PATCH net-next 2/9] net: atlantic: move active_ipv4/ipv6 bitmap updates after HW write updates after HW write sukhdeeps
2026-05-12 9:53 ` Paolo Abeni
2026-05-06 13:57 ` sukhdeeps [this message]
2026-05-06 13:57 ` [PATCH net-next 4/9] net: atlantic: add AQC113 hardware register definitions and accessors definitions and accessors sukhdeeps
2026-05-06 13:57 ` [PATCH net-next 5/9] net: atlantic: add AQC113 filter data structures and firmware query and firmware query firmware query sukhdeeps
2026-05-12 9:53 ` Paolo Abeni
2026-05-06 13:57 ` [PATCH net-next 6/9] net: atlantic: implement AQC113 L2/L3/L4 RX filter management filter management management sukhdeeps
2026-05-06 22:43 ` Vadim Fedorenko
2026-05-08 6:56 ` [EXTERNAL] " Sukhdeep Soni [C]
2026-05-12 9:54 ` Paolo Abeni
2026-05-06 13:57 ` [PATCH net-next 7/9] net: atlantic: add AQC113 PTP traffic class and TX path setup TX path setup sukhdeeps
2026-05-12 9:54 ` Paolo Abeni
2026-05-06 13:57 ` [PATCH net-next 8/9] net: atlantic: extend hw_ops and TX descriptor for AQC113 PTP for AQC113 PTP sukhdeeps
2026-05-06 13:57 ` [PATCH net-next 9/9] net: atlantic: add PTP support for AQC113 (Antigua) (Antigua) sukhdeeps
2026-05-12 9:54 ` Paolo Abeni
2026-05-08 12:01 ` [PATCH net-next v2 0/9] net: atlantic: add PTP support for AQC113 (Antigua) sukhdeeps
2026-05-08 12:01 ` [PATCH net-next v2 1/9] net: atlantic: correct L3L4 filter flow_type masking and IPv6 handling masking and IPv6 handling sukhdeeps
2026-05-08 12:01 ` [PATCH net-next v2 2/9] net: atlantic: move active_ipv4/ipv6 bitmap updates after HW write updates after HW write sukhdeeps
2026-05-08 12:01 ` [PATCH net-next v2 3/9] net: atlantic: decouple aq_set_data_fl3l4() from driver internals driver internals sukhdeeps
2026-05-08 12:01 ` [PATCH net-next v2 4/9] net: atlantic: add AQC113 hardware register definitions and accessors definitions and accessors sukhdeeps
2026-05-08 12:01 ` [PATCH net-next v2 5/9] net: atlantic: add AQC113 filter data structures and firmware query and firmware query firmware query sukhdeeps
2026-05-08 12:01 ` [PATCH net-next v2 6/9] net: atlantic: implement AQC113 L2/L3/L4 RX filter management filter management management sukhdeeps
2026-05-12 10:00 ` Paolo Abeni
2026-05-12 10:04 ` Paolo Abeni
2026-05-08 12:01 ` [PATCH net-next v2 7/9] net: atlantic: add AQC113 PTP traffic class and TX path setup TX path setup sukhdeeps
2026-05-08 12:01 ` [PATCH net-next v2 8/9] net: atlantic: extend hw_ops and TX descriptor for AQC113 PTP for AQC113 PTP sukhdeeps
2026-05-08 12:01 ` [PATCH net-next v2 9/9] net: atlantic: add PTP support for AQC113 (Antigua) (Antigua) sukhdeeps
2026-05-12 10:01 ` Paolo Abeni
2026-05-12 10:17 ` Paolo Abeni
2026-05-08 23:06 ` [PATCH net-next v2 0/9] net: atlantic: add PTP support for AQC113 (Antigua) Jakub Kicinski
2026-05-11 12:26 ` [EXTERNAL] " Sukhdeep Soni [C]
2026-05-11 23:50 ` Jakub Kicinski
2026-05-12 11:27 ` Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260506135706.2834-4-sukhdeeps@marvell.com \
--to=sukhdeeps@marvell.com \
--cc=andrew+netdev@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=epomozov@marvell.com \
--cc=irusskikh@marvell.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=richardcochran@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.