From: Vadim Fedorenko <vadim.fedorenko@linux.dev>
To: sukhdeeps@marvell.com, netdev@vger.kernel.org
Cc: irusskikh@marvell.com, epomozov@marvell.com,
richardcochran@gmail.com, andrew+netdev@lunn.ch,
davem@davemloft.net, edumazet@google.com, kuba@kernel.org,
pabeni@redhat.com, linux-kernel@vger.kernel.org
Subject: Re: [PATCH net-next 6/9] net: atlantic: implement AQC113 L2/L3/L4 RX filter management filter management management
Date: Wed, 6 May 2026 23:43:19 +0100 [thread overview]
Message-ID: <2a15199c-d48f-4034-a907-6efa883d5d99@linux.dev> (raw)
In-Reply-To: <20260506135706.2834-7-sukhdeeps@marvell.com>
On 06/05/2026 14:57, sukhdeeps@marvell.com wrote:
> From: Sukhdeep Singh <sukhdeeps@marvell.com>
>
> Implement complete RX filter management for AQC113 hardware:
>
> - Add tag-based filter policy with reference-counted sharing, allowing
> multiple filter rules to share the same L3 or L4 hardware filter
> when their match criteria are identical.
> - Implement L3 (IPv4/IPv6 source/destination address and protocol)
> filter find, get (program HW and increment refcount), and put
> (decrement refcount and clear HW when last user releases).
> - Implement L4 (TCP/UDP/SCTP source/destination port) filter
> management with the same find/get/put pattern.
> - Add combined L3L4 filter configuration that translates legacy
> aq_rx_filter_l3l4 commands into AQC113 separate L3+L4 filter
> programming with Action Resolver Table (ART) entries.
> - Add L2 ethertype filter set/clear with tag-based ART integration.
> - Add MAC address setup using firmware-provided L2 filter base index.
>
> Update hardware initialization:
> - Use firmware-reported ART section base and count instead of
> hardcoded 0xFFFF section enable.
> - Enable L3 v6/v4 select mode for simultaneous IPv4/IPv6 filtering.
> - Initialize L3L4 filter indices to -1 on reset.
>
> Wire up hw_filter_l2_set, hw_filter_l2_clear, hw_filter_l3l4_set,
> hw_set_mac_address, hw_get_version, and hw_get_regs in hw_atl2_ops.
>
> Signed-off-by: Sukhdeep Singh <sukhdeeps@marvell.com>
> ---
> .../net/ethernet/aquantia/atlantic/aq_hw.h | 2 +
> .../aquantia/atlantic/hw_atl2/hw_atl2.c | 582 +++++++++++++++++-
> 2 files changed, 580 insertions(+), 4 deletions(-)
[...]
>
> @@ -380,6 +422,9 @@ static void hw_atl2_hw_init_new_rx_filters(struct aq_hw_s *self)
> {
> u8 *prio_tc_map = self->aq_nic_cfg->prio_tc_map;
> struct hw_atl2_priv *priv = self->priv;
> + u32 art_first_sec, art_last_sec;
> + u32 art_sections;
> + u32 art_mask = 0;
no need to init variable which is overwritten later ...
> u16 action;
> u8 index;
> int i;
> @@ -394,9 +439,14 @@ static void hw_atl2_hw_init_new_rx_filters(struct aq_hw_s *self)
> * REC entry is used for further processing. If multiple entries match,
> * the lowest REC entry, Action field will be selected.
> */
> - hw_atl2_rpf_act_rslvr_section_en_set(self, 0xFFFF);
> + art_last_sec = priv->art_base_index / 8 + priv->art_count / 8;
> + art_first_sec = priv->art_base_index / 8;
> + art_mask = (BIT(art_last_sec) - 1) - (BIT(art_first_sec) - 1);
... here
> + art_sections = hw_atl2_rpf_act_rslvr_section_en_get(self) | art_mask;
> + hw_atl2_rpf_act_rslvr_section_en_set(self, art_sections);
> + hw_atl2_rpf_l3_v6_v4_select_set(self, 1);
> hw_atl2_rpfl2_uc_flr_tag_set(self, HW_ATL2_RPF_TAG_BASE_UC,
> - HW_ATL2_MAC_UC);
> + priv->l2_filters_base_index);
> hw_atl2_rpfl2_bc_flr_tag_set(self, HW_ATL2_RPF_TAG_BASE_UC);
>
> /* FW reserves the beginning of ART, thus all driver entries must
> @@ -530,6 +580,35 @@ static int hw_atl2_hw_init_rx_path(struct aq_hw_s *self)
> return aq_hw_err_from_flags(self);
> }
>
> +static int hw_atl2_hw_mac_addr_set(struct aq_hw_s *self, const u8 *mac_addr)
> +{
> + struct hw_atl2_priv *priv = self->priv;
> + u32 location = priv->l2_filters_base_index;
> + unsigned int h = 0U;
> + unsigned int l = 0U;
> + int err = 0;
here again, h, l and err are not used with init values.
> +
> + if (!mac_addr) {
> + err = -EINVAL;
> + goto err_exit;
> + }
> + h = (mac_addr[0] << 8) | (mac_addr[1]);
> + l = (mac_addr[2] << 24) | (mac_addr[3] << 16) |
> + (mac_addr[4] << 8) | mac_addr[5];
> +
> + hw_atl_rpfl2_uc_flr_en_set(self, 0U, location);
> + hw_atl_rpfl2unicast_dest_addresslsw_set(self, l, location);
> + hw_atl_rpfl2unicast_dest_addressmsw_set(self, h, location);
> + hw_atl_rpfl2unicast_flr_act_set(self, 1U, location);
> + hw_atl2_rpfl2_uc_flr_tag_set(self, HW_ATL2_RPF_TAG_BASE_UC, location);
> + hw_atl_rpfl2_uc_flr_en_set(self, 1U, location);
> +
> + err = aq_hw_err_from_flags(self);
> +
> +err_exit:
> + return err;
> +}
> +
> static int hw_atl2_hw_init(struct aq_hw_s *self, const u8 *mac_addr)
> {
> static u32 aq_hw_atl2_igcr_table_[4][2] = {
[...]
next prev parent reply other threads:[~2026-05-06 22:43 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-06 13:56 [PATCH net-next 0/9] net: atlantic: add PTP support for AQC113 (Antigua) sukhdeeps
2026-05-06 13:56 ` [PATCH net-next 1/9] net: atlantic: correct L3L4 filter flow_type masking and IPv6 handling masking and IPv6 handling sukhdeeps
2026-05-06 13:56 ` [PATCH net-next 2/9] net: atlantic: move active_ipv4/ipv6 bitmap updates after HW write updates after HW write sukhdeeps
2026-05-12 9:53 ` Paolo Abeni
2026-05-06 13:57 ` [PATCH net-next 3/9] net: atlantic: decouple aq_set_data_fl3l4() from driver internals driver internals sukhdeeps
2026-05-06 13:57 ` [PATCH net-next 4/9] net: atlantic: add AQC113 hardware register definitions and accessors definitions and accessors sukhdeeps
2026-05-06 13:57 ` [PATCH net-next 5/9] net: atlantic: add AQC113 filter data structures and firmware query and firmware query firmware query sukhdeeps
2026-05-12 9:53 ` Paolo Abeni
2026-05-06 13:57 ` [PATCH net-next 6/9] net: atlantic: implement AQC113 L2/L3/L4 RX filter management filter management management sukhdeeps
2026-05-06 22:43 ` Vadim Fedorenko [this message]
2026-05-08 6:56 ` [EXTERNAL] " Sukhdeep Soni [C]
2026-05-12 9:54 ` Paolo Abeni
2026-05-06 13:57 ` [PATCH net-next 7/9] net: atlantic: add AQC113 PTP traffic class and TX path setup TX path setup sukhdeeps
2026-05-12 9:54 ` Paolo Abeni
2026-05-06 13:57 ` [PATCH net-next 8/9] net: atlantic: extend hw_ops and TX descriptor for AQC113 PTP for AQC113 PTP sukhdeeps
2026-05-06 13:57 ` [PATCH net-next 9/9] net: atlantic: add PTP support for AQC113 (Antigua) (Antigua) sukhdeeps
2026-05-12 9:54 ` Paolo Abeni
2026-05-08 12:01 ` [PATCH net-next v2 0/9] net: atlantic: add PTP support for AQC113 (Antigua) sukhdeeps
2026-05-08 12:01 ` [PATCH net-next v2 1/9] net: atlantic: correct L3L4 filter flow_type masking and IPv6 handling masking and IPv6 handling sukhdeeps
2026-05-08 12:01 ` [PATCH net-next v2 2/9] net: atlantic: move active_ipv4/ipv6 bitmap updates after HW write updates after HW write sukhdeeps
2026-05-08 12:01 ` [PATCH net-next v2 3/9] net: atlantic: decouple aq_set_data_fl3l4() from driver internals driver internals sukhdeeps
2026-05-08 12:01 ` [PATCH net-next v2 4/9] net: atlantic: add AQC113 hardware register definitions and accessors definitions and accessors sukhdeeps
2026-05-08 12:01 ` [PATCH net-next v2 5/9] net: atlantic: add AQC113 filter data structures and firmware query and firmware query firmware query sukhdeeps
2026-05-08 12:01 ` [PATCH net-next v2 6/9] net: atlantic: implement AQC113 L2/L3/L4 RX filter management filter management management sukhdeeps
2026-05-12 10:00 ` Paolo Abeni
2026-05-12 10:04 ` Paolo Abeni
2026-05-08 12:01 ` [PATCH net-next v2 7/9] net: atlantic: add AQC113 PTP traffic class and TX path setup TX path setup sukhdeeps
2026-05-08 12:01 ` [PATCH net-next v2 8/9] net: atlantic: extend hw_ops and TX descriptor for AQC113 PTP for AQC113 PTP sukhdeeps
2026-05-08 12:01 ` [PATCH net-next v2 9/9] net: atlantic: add PTP support for AQC113 (Antigua) (Antigua) sukhdeeps
2026-05-12 10:01 ` Paolo Abeni
2026-05-12 10:17 ` Paolo Abeni
2026-05-08 23:06 ` [PATCH net-next v2 0/9] net: atlantic: add PTP support for AQC113 (Antigua) Jakub Kicinski
2026-05-11 12:26 ` [EXTERNAL] " Sukhdeep Soni [C]
2026-05-11 23:50 ` Jakub Kicinski
2026-05-12 11:27 ` Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2a15199c-d48f-4034-a907-6efa883d5d99@linux.dev \
--to=vadim.fedorenko@linux.dev \
--cc=andrew+netdev@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=epomozov@marvell.com \
--cc=irusskikh@marvell.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=richardcochran@gmail.com \
--cc=sukhdeeps@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.