From: sashiko-bot@kernel.org
To: "Tomi Valkeinen" <tomi.valkeinen@ideasonboard.com>
Cc: devicetree@vger.kernel.org, robh@kernel.org, conor+dt@kernel.org,
krzk+dt@kernel.org
Subject: Re: [PATCH v2 15/16] arm64: dts: ti: k3-am62p-j722s-common-main: Add support for DSS
Date: Thu, 14 May 2026 11:32:33 +0000 [thread overview]
Message-ID: <20260514113233.CF50CC2BCB3@smtp.kernel.org> (raw)
In-Reply-To: <20260513-beagley-ai-display-v2-15-9e9bcefde6bc@ideasonboard.com>
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Low] The `dss0_oldi1` device tree node is missing the mandatory `clocks`, `clock-names`, and `ti,oldi-io-ctrl` properties, leading to device tree schema validation failures.
--
commit 15bd859b1e4ef9aa0d15277777045451416f00b7
Author: Jayesh Choudhary <j-choudhary@ti.com>
arm64: dts: ti: k3-am62p-j722s-common-main: Add support for DSS
This commit adds device tree nodes for the Display Subsystem (DSS) and
associated hardware like OLDI, DPHY, and DSI for TI's AM62P and J722S SoCs.
> diff --git a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi
> index 5e8eb9f2fe243..576fa2f883648 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi
[ ... ]
> @@ -1111,6 +1116,110 @@ dphy0: phy@30110000 {
[ ... ]
> + oldi-transmitters {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + dss0_oldi0: oldi@0 {
> + reg = <0>;
> + clocks = <&k3_clks 186 0>;
> + clock-names = "serial";
> + ti,oldi-io-ctrl = <&dss_oldi_io_ctrl>;
> + status = "disabled";
> + power-domains = <&k3_pds 243 TI_SCI_PD_EXCLUSIVE>; /* OLDI0_VD */
> + };
> +
> + dss0_oldi1: oldi@1 {
> + reg = <1>;
> + status = "disabled";
> + power-domains = <&k3_pds 244 TI_SCI_PD_EXCLUSIVE>; /* OLDI1_VD */
> + };
Should dss0_oldi1 include the clocks, clock-names, and ti,oldi-io-ctrl
properties?
The ti,am625-oldi.yaml schema requires these properties for all oldi nodes.
While dss0_oldi0 and dss1_oldi1 specify them, they are missing here.
Would omitting these properties cause dtbs_check validation errors when a
board enables the node? Since this represents the same physical OLDI1 block
as dss1_oldi1, does it need the same physical clock and syscon connections
specified to pass validation and accurately describe the hardware?
--
Sashiko AI review · https://sashiko.dev/#/patchset/20260513-beagley-ai-display-v2-0-9e9bcefde6bc@ideasonboard.com?part=15
next prev parent reply other threads:[~2026-05-14 11:32 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-13 13:17 [PATCH v2 00/16] drm/tidss: Add BeagleY-AI display support (and some more) Tomi Valkeinen
2026-05-13 13:17 ` [PATCH v2 01/16] dt-bindings: display: ti: Move ti,am62l-dss binding to a new binding file Tomi Valkeinen
2026-05-15 6:51 ` Krzysztof Kozlowski
2026-05-13 13:17 ` [PATCH v2 02/16] dt-bindings: display: ti,am65x-dss: Simplify binding Tomi Valkeinen
2026-05-15 6:51 ` Krzysztof Kozlowski
2026-05-13 13:17 ` [PATCH v2 03/16] dt-bindings: display: ti,am625-oldi: Add optional power-domain for OLDI Tomi Valkeinen
2026-05-15 6:51 ` Krzysztof Kozlowski
2026-05-13 13:17 ` [PATCH v2 04/16] dt-bindings: display: ti,am65x-dss: Add ti,dpi-io-ctrl Tomi Valkeinen
2026-05-13 13:17 ` [PATCH v2 05/16] dt-bindings: display: ti,am65x-dss: Add AM62P DSS Tomi Valkeinen
2026-05-15 6:52 ` Krzysztof Kozlowski
2026-05-15 6:56 ` Tomi Valkeinen
2026-05-15 6:58 ` Krzysztof Kozlowski
2026-05-13 13:17 ` [PATCH v2 06/16] drm/tidss: Remove extra pm_runtime_mark_last_busy Tomi Valkeinen
2026-05-13 13:17 ` [PATCH v2 07/16] drm/tidss: oldi: Remove define for unused register OLDI_LB_CTRL Tomi Valkeinen
2026-05-13 13:17 ` [PATCH v2 08/16] drm/tidss: Add mechanism to detect DPI output Tomi Valkeinen
2026-05-13 13:17 ` [PATCH v2 09/16] drm/tidss: Add external data and sync signal edge configuration Tomi Valkeinen
2026-05-14 7:57 ` sashiko-bot
2026-05-13 13:17 ` [PATCH v2 10/16] drm/tidss: Add support for DPIENABLE bit Tomi Valkeinen
2026-05-14 8:36 ` sashiko-bot
2026-05-13 13:17 ` [PATCH v2 11/16] drm/tidss: oldi: Fix OLDI signal polarities Tomi Valkeinen
2026-05-13 13:17 ` [PATCH v2 12/16] drm/tidss: oldi: Convert OLDI to an aux driver Tomi Valkeinen
2026-05-14 10:55 ` sashiko-bot
2026-05-13 13:17 ` [PATCH v2 13/16] drm/tidss: Add support for AM62P display subsystem Tomi Valkeinen
2026-05-13 13:17 ` [PATCH v2 14/16] arm64: dts: ti: k3-am62p-j722s-common-main: Make main_conf a syscon Tomi Valkeinen
2026-05-14 11:19 ` sashiko-bot
2026-05-13 13:17 ` [PATCH v2 15/16] arm64: dts: ti: k3-am62p-j722s-common-main: Add support for DSS Tomi Valkeinen
2026-05-14 11:32 ` sashiko-bot [this message]
2026-05-13 13:17 ` [PATCH v2 16/16] arm64: dts: ti: beagley-ai: Enable HDMI display and audio Tomi Valkeinen
2026-05-14 11:56 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260514113233.CF50CC2BCB3@smtp.kernel.org \
--to=sashiko-bot@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=robh@kernel.org \
--cc=sashiko-reviews@lists.linux.dev \
--cc=tomi.valkeinen@ideasonboard.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.