From: Pramod Maurya <pramod.nexgen@gmail.com>
To: jic23@kernel.org
Cc: lars@metafoo.de, linux-iio@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
pramod.nexgen@gmail.com
Subject: [PATCH v4 3/3] dt-bindings: misc: Add binding for Xilinx AXI-Stream FIFO
Date: Fri, 15 May 2026 03:57:36 -0400 [thread overview]
Message-ID: <20260515075736.172172-4-pramod.nexgen@gmail.com> (raw)
In-Reply-To: <20260515075736.172172-1-pramod.nexgen@gmail.com>
Add a YAML schema for the Xilinx AXI-Stream FIFO IP core (PG080).
The binding documents the three supported compatible strings and the
vendor-specific properties that the axis-fifo staging driver reads from
the device tree.
This resolves the following checkpatch.pl warnings in
drivers/staging/axis-fifo/axis-fifo.c:
WARNING: DT compatible string "xlnx,axi-fifo-mm-s-4.1" appears un-documented
WARNING: DT compatible string "xlnx,axi-fifo-mm-s-4.2" appears un-documented
WARNING: DT compatible string "xlnx,axi-fifo-mm-s-4.3" appears un-documented
Signed-off-by: Pramod Maurya <pramod.nexgen@gmail.com>
---
.../bindings/misc/xlnx,axi-fifo-mm-s.yaml | 93 +++++++++++++++++++
MAINTAINERS | 6 ++
2 files changed, 99 insertions(+)
create mode 100644 Documentation/devicetree/bindings/misc/xlnx,axi-fifo-mm-s.yaml
diff --git a/Documentation/devicetree/bindings/misc/xlnx,axi-fifo-mm-s.yaml b/Documentation/devicetree/bindings/misc/xlnx,axi-fifo-mm-s.yaml
new file mode 100644
index 000000000000..f4ef7c277cd7
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/xlnx,axi-fifo-mm-s.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/misc/xlnx,axi-fifo-mm-s.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx AXI-Stream FIFO
+
+maintainers:
+ - Jacob Feder <jacobsfeder@gmail.com>
+
+description:
+ The Xilinx AXI-Stream FIFO (PG080) provides a memory-mapped interface to
+ an AXI-Stream FIFO IP core. It allows a processor to transmit and receive
+ AXI-Stream packets via simple MMIO register reads and writes. Currently
+ only store-forward mode with a 32-bit AXI4-Lite interface is supported.
+
+properties:
+ compatible:
+ enum:
+ - xlnx,axi-fifo-mm-s-4.1
+ - xlnx,axi-fifo-mm-s-4.2
+ - xlnx,axi-fifo-mm-s-4.3
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ xlnx,axi-str-rxd-tdata-width:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Width of the receive AXI-Stream data bus in bits. Currently only 32
+ is supported.
+ const: 32
+
+ xlnx,axi-str-txd-tdata-width:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Width of the transmit AXI-Stream data bus in bits. Currently only 32
+ is supported.
+ const: 32
+
+ xlnx,rx-fifo-depth:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Depth of the receive FIFO in words.
+
+ xlnx,tx-fifo-depth:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Depth of the transmit FIFO in words.
+
+ xlnx,use-rx-data:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Set to 1 if the receive data FIFO is enabled, 0 otherwise.
+ enum: [0, 1]
+
+ xlnx,use-tx-data:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Set to 1 if the transmit data FIFO is enabled, 0 otherwise.
+ enum: [0, 1]
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - xlnx,axi-str-rxd-tdata-width
+ - xlnx,axi-str-txd-tdata-width
+ - xlnx,rx-fifo-depth
+ - xlnx,tx-fifo-depth
+ - xlnx,use-rx-data
+ - xlnx,use-tx-data
+
+additionalProperties: false
+
+examples:
+ - |
+ axi_fifo: fifo@43c00000 {
+ compatible = "xlnx,axi-fifo-mm-s-4.3";
+ reg = <0x43c00000 0x10000>;
+ interrupts = <0 30 4>;
+ interrupt-parent = <&intc>;
+ xlnx,axi-str-rxd-tdata-width = <32>;
+ xlnx,axi-str-txd-tdata-width = <32>;
+ xlnx,rx-fifo-depth = <0x1000>;
+ xlnx,tx-fifo-depth = <0x1000>;
+ xlnx,use-rx-data = <1>;
+ xlnx,use-tx-data = <1>;
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index 58d35c17704d..bbb6b8c20ed6 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -29164,6 +29164,12 @@ S: Maintained
F: Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml
F: drivers/iio/adc/xilinx-ams.c
+XILINX AXI-STREAM FIFO DRIVER
+M: Jacob Feder <jacobsfeder@gmail.com>
+S: Maintained
+F: Documentation/devicetree/bindings/misc/xlnx,axi-fifo-mm-s.yaml
+F: drivers/staging/axis-fifo/
+
XILINX AXI ETHERNET DRIVER
M: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
S: Maintained
--
2.52.0
next prev parent reply other threads:[~2026-05-15 7:58 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-10 8:32 [PATCH v3] dt-bindings: iio: adc: Convert xilinx-xadc bindings to YAML schema Pramod Maurya
2026-05-10 9:43 ` Rob Herring (Arm)
2026-05-10 12:01 ` Pramod Maurya
2026-05-11 16:15 ` Jonathan Cameron
2026-05-11 16:24 ` David Lechner
2026-05-12 12:14 ` Rob Herring
2026-05-12 13:58 ` David Lechner
2026-05-12 14:10 ` Michal Simek
2026-05-12 14:16 ` David Lechner
2026-05-12 14:21 ` Michal Simek
2026-05-12 14:13 ` David Lechner
2026-05-12 19:42 ` Rob Herring
2026-05-12 20:03 ` David Lechner
2026-05-12 20:48 ` Rob Herring
2026-05-11 16:17 ` Jonathan Cameron
2026-05-11 20:55 ` sashiko-bot
2026-05-11 20:32 ` sashiko-bot
2026-05-15 7:57 ` [PATCH v4 0/3] Convert Xilinx XADC binding to YAML and related cleanups Pramod Maurya
2026-05-15 7:57 ` [PATCH v4 1/3] dt-bindings: iio: adc: Convert xilinx-xadc bindings to YAML schema Pramod Maurya
2026-05-15 8:07 ` sashiko-bot
2026-05-16 11:18 ` Jonathan Cameron
2026-05-15 7:57 ` [PATCH v4 2/3] staging: axis-fifo: Fix alignment of wait_event_interruptible arguments Pramod Maurya
2026-05-15 8:17 ` sashiko-bot
2026-05-16 11:20 ` Jonathan Cameron
2026-05-15 7:57 ` Pramod Maurya [this message]
2026-05-15 8:32 ` [PATCH v4 3/3] dt-bindings: misc: Add binding for Xilinx AXI-Stream FIFO sashiko-bot
2026-05-15 11:03 ` Krzysztof Kozlowski
2026-05-16 11:08 ` [PATCH v4 0/3] Convert Xilinx XADC binding to YAML and related cleanups Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260515075736.172172-4-pramod.nexgen@gmail.com \
--to=pramod.nexgen@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jic23@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.