All of lore.kernel.org
 help / color / mirror / Atom feed
From: Stephen Hemminger <stephen@networkplumber.org>
To: dev@dpdk.org
Cc: Stephen Hemminger <stephen@networkplumber.org>,
	Chas Williams <3chas3@gmail.com>,
	"Min Hu (Connor)" <humin29@huawei.com>
Subject: [PATCH v2 1/4] net/bonding: make 8023ad enable function void
Date: Thu, 28 May 2026 16:59:13 -0700	[thread overview]
Message-ID: <20260529000157.235931-2-stephen@networkplumber.org> (raw)
In-Reply-To: <20260529000157.235931-1-stephen@networkplumber.org>

The function never returns an error. Cleanup the call sites.

The 8023ad disable function was never implemented,
remove prototype.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
 drivers/net/bonding/eth_bond_8023ad_private.h | 17 +----------------
 drivers/net/bonding/rte_eth_bond_8023ad.c     |  4 +---
 drivers/net/bonding/rte_eth_bond_pmd.c        |  7 +++----
 3 files changed, 5 insertions(+), 23 deletions(-)

diff --git a/drivers/net/bonding/eth_bond_8023ad_private.h b/drivers/net/bonding/eth_bond_8023ad_private.h
index ab7d15f81a..bd7a5848de 100644
--- a/drivers/net/bonding/eth_bond_8023ad_private.h
+++ b/drivers/net/bonding/eth_bond_8023ad_private.h
@@ -209,25 +209,10 @@ bond_mode_8023ad_setup(struct rte_eth_dev *dev,
  * @internal
  *
  * Enables 802.1AX mode and all active members on bonding interface.
- *
- * @param dev Bonding interface
- * @return
- *  0 on success, negative value otherwise.
  */
-int
+void
 bond_mode_8023ad_enable(struct rte_eth_dev *dev);
 
-/**
- * @internal
- *
- * Disables 802.1AX mode of the bonding interface and members.
- *
- * @param dev Bonding interface
- * @return
- *   0 on success, negative value otherwise.
- */
-int bond_mode_8023ad_disable(struct rte_eth_dev *dev);
-
 /**
  * @internal
  *
diff --git a/drivers/net/bonding/rte_eth_bond_8023ad.c b/drivers/net/bonding/rte_eth_bond_8023ad.c
index ba88f6d261..eba713e381 100644
--- a/drivers/net/bonding/rte_eth_bond_8023ad.c
+++ b/drivers/net/bonding/rte_eth_bond_8023ad.c
@@ -1287,7 +1287,7 @@ bond_mode_8023ad_setup(struct rte_eth_dev *dev,
 		bond_mode_8023ad_start(dev);
 }
 
-int
+void
 bond_mode_8023ad_enable(struct rte_eth_dev *bond_dev)
 {
 	struct bond_dev_private *internals = bond_dev->data->dev_private;
@@ -1296,8 +1296,6 @@ bond_mode_8023ad_enable(struct rte_eth_dev *bond_dev)
 	for (i = 0; i < internals->active_member_count; i++)
 		bond_mode_8023ad_activate_member(bond_dev,
 				internals->active_members[i]);
-
-	return 0;
 }
 
 int
diff --git a/drivers/net/bonding/rte_eth_bond_pmd.c b/drivers/net/bonding/rte_eth_bond_pmd.c
index 96725071da..7fcb3ec7d7 100644
--- a/drivers/net/bonding/rte_eth_bond_pmd.c
+++ b/drivers/net/bonding/rte_eth_bond_pmd.c
@@ -1619,8 +1619,7 @@ bond_ethdev_mode_set(struct rte_eth_dev *eth_dev, uint8_t mode)
 		eth_dev->rx_pkt_burst = bond_ethdev_rx_burst;
 		break;
 	case BONDING_MODE_8023AD:
-		if (bond_mode_8023ad_enable(eth_dev) != 0)
-			return -1;
+		bond_mode_8023ad_enable(eth_dev);
 
 		if (internals->mode4.dedicated_queues.enabled == 0) {
 			eth_dev->rx_pkt_burst = bond_ethdev_rx_burst_8023ad;
@@ -1641,13 +1640,13 @@ bond_ethdev_mode_set(struct rte_eth_dev *eth_dev, uint8_t mode)
 		eth_dev->rx_pkt_burst = bond_ethdev_rx_burst_active_backup;
 		break;
 	case BONDING_MODE_ALB:
-		if (bond_mode_alb_enable(eth_dev) != 0)
-			return -1;
+		bond_mode_alb_enable(eth_dev);
 
 		eth_dev->tx_pkt_burst = bond_ethdev_tx_burst_alb;
 		eth_dev->rx_pkt_burst = bond_ethdev_rx_burst_alb;
 		break;
 	default:
+		RTE_BOND_LOG(ERR, "Invalid mode %#x", mode);
 		return -1;
 	}
 
-- 
2.53.0


  reply	other threads:[~2026-05-29  0:02 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-04-17 16:51 [PATCH 0/3] net/bond: fix secondary process crash and related cleanup Stephen Hemminger
2026-04-17 16:51 ` [PATCH 1/3] net/bonding: restore dedicated queue state on mode set error Stephen Hemminger
2026-05-27 16:19   ` Bruce Richardson
2026-04-17 16:51 ` [PATCH 2/3] net/bonding: prevent crash on Rx/Tx from secondary process Stephen Hemminger
2026-05-27 16:24   ` Bruce Richardson
2026-04-17 16:51 ` [PATCH 3/3] net/bonding: remove redundant function names from log Stephen Hemminger
2026-05-27 16:28   ` Bruce Richardson
2026-05-08 17:59 ` [PATCH 0/3] net/bond: fix secondary process crash and related cleanup Stephen Hemminger
2026-05-28 23:59 ` [PATCH v2 0/4] net/bond: fixes and cleanup Stephen Hemminger
2026-05-28 23:59   ` Stephen Hemminger [this message]
2026-05-28 23:59   ` [PATCH v2 2/4] net/bonding: check mode before setting dedicated queues Stephen Hemminger
2026-05-28 23:59   ` [PATCH v2 3/4] net/bonding: prevent crash on Rx/Tx from secondary process Stephen Hemminger
2026-05-28 23:59   ` [PATCH v2 4/4] net/bonding: remove redundant function names from log Stephen Hemminger
2026-06-18 16:00   ` [PATCH v2 0/4] net/bond: fixes and cleanup Stephen Hemminger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260529000157.235931-2-stephen@networkplumber.org \
    --to=stephen@networkplumber.org \
    --cc=3chas3@gmail.com \
    --cc=dev@dpdk.org \
    --cc=humin29@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.