* FAILED: patch "[PATCH] phy: tegra: xusb: Fix per-pad high-speed termination" failed to apply to 6.1-stable tree
@ 2026-05-28 11:43 gregkh
2026-06-01 10:51 ` [PATCH 6.1.y 1/2] phy: tegra: xusb: Disable trk clk when not in use Sasha Levin
0 siblings, 1 reply; 3+ messages in thread
From: gregkh @ 2026-05-28 11:43 UTC (permalink / raw)
To: waynec, jonathanh, vkoul, weichengc; +Cc: stable
The patch below does not apply to the 6.1-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y
git checkout FETCH_HEAD
git cherry-pick -x da110228b54f2e2143d97ea7151e0dc22e539d67
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2026052822-poking-retrace-342b@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From da110228b54f2e2143d97ea7151e0dc22e539d67 Mon Sep 17 00:00:00 2001
From: Wayne Chang <waynec@nvidia.com>
Date: Mon, 4 May 2026 11:33:05 +0800
Subject: [PATCH] phy: tegra: xusb: Fix per-pad high-speed termination
calibration
The existing code reads a single hs_term_range_adj value from bit field
[10:7] of FUSE_SKU_CALIB_0 and applies it to all USB2 pads uniformly.
However, on SoCs that support per-pad termination, each pad has its own
hs_term_range_adj field: pad 0 in FUSE_SKU_CALIB_0[10:7], and pads 1-3
in FUSE_USB_CALIB_EXT_0 at bit offsets [8:5], [12:9], and [16:13]
respectively.
Fix the calibration by reading per-pad values from the appropriate fuse
registers. For SoCs that do not support per-pad termination, replicate
pad 0's value to all pads to maintain existing behavior.
Add a has_per_pad_term flag to the SoC data to indicate whether per-pad
termination values are available in FUSE_USB_CALIB_EXT_0.
Fixes: 1ef535c6ba8e ("phy: tegra: xusb: Add Tegra194 support")
Cc: stable@vger.kernel.org
Signed-off-by: Wayne Chang <waynec@nvidia.com>
Signed-off-by: Wei-Cheng Chen <weichengc@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260504033305.2283145-1-weichengc@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
diff --git a/drivers/phy/tegra/xusb-tegra186.c b/drivers/phy/tegra/xusb-tegra186.c
index 1ddf11265974..60156aea2707 100644
--- a/drivers/phy/tegra/xusb-tegra186.c
+++ b/drivers/phy/tegra/xusb-tegra186.c
@@ -20,8 +20,8 @@
/* FUSE USB_CALIB registers */
#define HS_CURR_LEVEL_PADX_SHIFT(x) ((x) ? (11 + (x - 1) * 6) : 0)
#define HS_CURR_LEVEL_PAD_MASK 0x3f
-#define HS_TERM_RANGE_ADJ_SHIFT 7
-#define HS_TERM_RANGE_ADJ_MASK 0xf
+#define HS_TERM_RANGE_ADJ_PADX_SHIFT(x) ((x) ? (5 + (x - 1) * 4) : 7)
+#define HS_TERM_RANGE_ADJ_PAD_MASK 0xf
#define HS_SQUELCH_SHIFT 29
#define HS_SQUELCH_MASK 0x7
@@ -253,7 +253,7 @@
struct tegra_xusb_fuse_calibration {
u32 *hs_curr_level;
u32 hs_squelch;
- u32 hs_term_range_adj;
+ u32 *hs_term_range_adj;
u32 rpd_ctrl;
};
@@ -930,7 +930,7 @@ static int tegra186_utmi_phy_power_on(struct phy *phy)
value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index));
value &= ~TERM_RANGE_ADJ(~0);
- value |= TERM_RANGE_ADJ(priv->calib.hs_term_range_adj);
+ value |= TERM_RANGE_ADJ(priv->calib.hs_term_range_adj[index]);
value &= ~RPD_CTRL(~0);
value |= RPD_CTRL(priv->calib.rpd_ctrl);
padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index));
@@ -1464,17 +1464,23 @@ static const char * const tegra186_usb3_functions[] = {
static int
tegra186_xusb_read_fuse_calibration(struct tegra186_xusb_padctl *padctl)
{
+ const struct tegra_xusb_padctl_soc *soc = padctl->base.soc;
struct device *dev = padctl->base.dev;
unsigned int i, count;
u32 value, *level;
+ u32 *hs_term_range_adj;
int err;
- count = padctl->base.soc->ports.usb2.count;
+ count = soc->ports.usb2.count;
level = devm_kcalloc(dev, count, sizeof(u32), GFP_KERNEL);
if (!level)
return -ENOMEM;
+ hs_term_range_adj = devm_kcalloc(dev, count, sizeof(u32), GFP_KERNEL);
+ if (!hs_term_range_adj)
+ return -ENOMEM;
+
err = tegra_fuse_readl(TEGRA_FUSE_SKU_CALIB_0, &value);
if (err)
return dev_err_probe(dev, err,
@@ -1490,8 +1496,8 @@ tegra186_xusb_read_fuse_calibration(struct tegra186_xusb_padctl *padctl)
padctl->calib.hs_squelch = (value >> HS_SQUELCH_SHIFT) &
HS_SQUELCH_MASK;
- padctl->calib.hs_term_range_adj = (value >> HS_TERM_RANGE_ADJ_SHIFT) &
- HS_TERM_RANGE_ADJ_MASK;
+ hs_term_range_adj[0] = (value >> HS_TERM_RANGE_ADJ_PADX_SHIFT(0)) &
+ HS_TERM_RANGE_ADJ_PAD_MASK;
err = tegra_fuse_readl(TEGRA_FUSE_USB_CALIB_EXT_0, &value);
if (err) {
@@ -1503,6 +1509,17 @@ tegra186_xusb_read_fuse_calibration(struct tegra186_xusb_padctl *padctl)
padctl->calib.rpd_ctrl = (value >> RPD_CTRL_SHIFT) & RPD_CTRL_MASK;
+ for (i = 1; i < count; i++) {
+ if (soc->has_per_pad_term)
+ hs_term_range_adj[i] =
+ (value >> HS_TERM_RANGE_ADJ_PADX_SHIFT(i)) &
+ HS_TERM_RANGE_ADJ_PAD_MASK;
+ else
+ hs_term_range_adj[i] = hs_term_range_adj[0];
+ }
+
+ padctl->calib.hs_term_range_adj = hs_term_range_adj;
+
return 0;
}
@@ -1708,6 +1725,7 @@ const struct tegra_xusb_padctl_soc tegra194_xusb_padctl_soc = {
.num_supplies = ARRAY_SIZE(tegra194_xusb_padctl_supply_names),
.supports_gen2 = true,
.poll_trk_completed = true,
+ .has_per_pad_term = true,
};
EXPORT_SYMBOL_GPL(tegra194_xusb_padctl_soc);
@@ -1732,6 +1750,7 @@ const struct tegra_xusb_padctl_soc tegra234_xusb_padctl_soc = {
.trk_hw_mode = false,
.trk_update_on_idle = true,
.supports_lp_cfg_en = true,
+ .has_per_pad_term = true,
};
EXPORT_SYMBOL_GPL(tegra234_xusb_padctl_soc);
#endif
diff --git a/drivers/phy/tegra/xusb.h b/drivers/phy/tegra/xusb.h
index cd277d0ed9e1..77609e54de66 100644
--- a/drivers/phy/tegra/xusb.h
+++ b/drivers/phy/tegra/xusb.h
@@ -435,6 +435,7 @@ struct tegra_xusb_padctl_soc {
bool trk_hw_mode;
bool trk_update_on_idle;
bool supports_lp_cfg_en;
+ bool has_per_pad_term;
};
struct tegra_xusb_padctl {
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH 6.1.y 1/2] phy: tegra: xusb: Disable trk clk when not in use
2026-05-28 11:43 FAILED: patch "[PATCH] phy: tegra: xusb: Fix per-pad high-speed termination" failed to apply to 6.1-stable tree gregkh
@ 2026-06-01 10:51 ` Sasha Levin
2026-06-01 10:51 ` [PATCH 6.1.y 2/2] phy: tegra: xusb: Fix per-pad high-speed termination calibration Sasha Levin
0 siblings, 1 reply; 3+ messages in thread
From: Sasha Levin @ 2026-06-01 10:51 UTC (permalink / raw)
To: stable; +Cc: Wayne Chang, Jon Hunter, Greg Kroah-Hartman, Sasha Levin
From: Wayne Chang <waynec@nvidia.com>
[ Upstream commit 71d9e899584e11bbd7eaf9934a619c69a15060d8 ]
Pad tracking is a one-time calibration for Tegra186 and Tegra194.
Clk should be disabled after calibration.
Disable clk after calibration.
While at it add 100us delay for HW recording the calibration value.
Signed-off-by: Wayne Chang <waynec@nvidia.com>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20230111110450.24617-5-jonathanh@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: da110228b54f ("phy: tegra: xusb: Fix per-pad high-speed termination calibration")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/phy/tegra/xusb-tegra186.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/phy/tegra/xusb-tegra186.c b/drivers/phy/tegra/xusb-tegra186.c
index b36c1e954f318..b778bdeeee59d 100644
--- a/drivers/phy/tegra/xusb-tegra186.c
+++ b/drivers/phy/tegra/xusb-tegra186.c
@@ -612,6 +612,10 @@ static void tegra186_utmi_bias_pad_power_on(struct tegra_xusb_padctl *padctl)
value &= ~USB2_PD_TRK;
padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
+ udelay(100);
+
+ clk_disable_unprepare(priv->usb2_trk_clk);
+
mutex_unlock(&padctl->lock);
}
@@ -636,8 +640,6 @@ static void tegra186_utmi_bias_pad_power_off(struct tegra_xusb_padctl *padctl)
value |= USB2_PD_TRK;
padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
- clk_disable_unprepare(priv->usb2_trk_clk);
-
mutex_unlock(&padctl->lock);
}
--
2.53.0
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH 6.1.y 2/2] phy: tegra: xusb: Fix per-pad high-speed termination calibration
2026-06-01 10:51 ` [PATCH 6.1.y 1/2] phy: tegra: xusb: Disable trk clk when not in use Sasha Levin
@ 2026-06-01 10:51 ` Sasha Levin
0 siblings, 0 replies; 3+ messages in thread
From: Sasha Levin @ 2026-06-01 10:51 UTC (permalink / raw)
To: stable; +Cc: Wayne Chang, Wei-Cheng Chen, Jon Hunter, Vinod Koul, Sasha Levin
From: Wayne Chang <waynec@nvidia.com>
[ Upstream commit da110228b54f2e2143d97ea7151e0dc22e539d67 ]
The existing code reads a single hs_term_range_adj value from bit field
[10:7] of FUSE_SKU_CALIB_0 and applies it to all USB2 pads uniformly.
However, on SoCs that support per-pad termination, each pad has its own
hs_term_range_adj field: pad 0 in FUSE_SKU_CALIB_0[10:7], and pads 1-3
in FUSE_USB_CALIB_EXT_0 at bit offsets [8:5], [12:9], and [16:13]
respectively.
Fix the calibration by reading per-pad values from the appropriate fuse
registers. For SoCs that do not support per-pad termination, replicate
pad 0's value to all pads to maintain existing behavior.
Add a has_per_pad_term flag to the SoC data to indicate whether per-pad
termination values are available in FUSE_USB_CALIB_EXT_0.
Fixes: 1ef535c6ba8e ("phy: tegra: xusb: Add Tegra194 support")
Cc: stable@vger.kernel.org
Signed-off-by: Wayne Chang <waynec@nvidia.com>
Signed-off-by: Wei-Cheng Chen <weichengc@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260504033305.2283145-1-weichengc@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/phy/tegra/xusb-tegra186.c | 32 ++++++++++++++++++++++++-------
drivers/phy/tegra/xusb.h | 1 +
2 files changed, 26 insertions(+), 7 deletions(-)
diff --git a/drivers/phy/tegra/xusb-tegra186.c b/drivers/phy/tegra/xusb-tegra186.c
index b778bdeeee59d..05a57037e3837 100644
--- a/drivers/phy/tegra/xusb-tegra186.c
+++ b/drivers/phy/tegra/xusb-tegra186.c
@@ -20,8 +20,8 @@
/* FUSE USB_CALIB registers */
#define HS_CURR_LEVEL_PADX_SHIFT(x) ((x) ? (11 + (x - 1) * 6) : 0)
#define HS_CURR_LEVEL_PAD_MASK 0x3f
-#define HS_TERM_RANGE_ADJ_SHIFT 7
-#define HS_TERM_RANGE_ADJ_MASK 0xf
+#define HS_TERM_RANGE_ADJ_PADX_SHIFT(x) ((x) ? (5 + (x - 1) * 4) : 7)
+#define HS_TERM_RANGE_ADJ_PAD_MASK 0xf
#define HS_SQUELCH_SHIFT 29
#define HS_SQUELCH_MASK 0x7
@@ -238,7 +238,7 @@
struct tegra_xusb_fuse_calibration {
u32 *hs_curr_level;
u32 hs_squelch;
- u32 hs_term_range_adj;
+ u32 *hs_term_range_adj;
u32 rpd_ctrl;
};
@@ -868,7 +868,7 @@ static int tegra186_utmi_phy_power_on(struct phy *phy)
value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index));
value &= ~TERM_RANGE_ADJ(~0);
- value |= TERM_RANGE_ADJ(priv->calib.hs_term_range_adj);
+ value |= TERM_RANGE_ADJ(priv->calib.hs_term_range_adj[index]);
value &= ~RPD_CTRL(~0);
value |= RPD_CTRL(priv->calib.rpd_ctrl);
padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index));
@@ -1403,17 +1403,23 @@ static const char * const tegra186_usb3_functions[] = {
static int
tegra186_xusb_read_fuse_calibration(struct tegra186_xusb_padctl *padctl)
{
+ const struct tegra_xusb_padctl_soc *soc = padctl->base.soc;
struct device *dev = padctl->base.dev;
unsigned int i, count;
u32 value, *level;
+ u32 *hs_term_range_adj;
int err;
- count = padctl->base.soc->ports.usb2.count;
+ count = soc->ports.usb2.count;
level = devm_kcalloc(dev, count, sizeof(u32), GFP_KERNEL);
if (!level)
return -ENOMEM;
+ hs_term_range_adj = devm_kcalloc(dev, count, sizeof(u32), GFP_KERNEL);
+ if (!hs_term_range_adj)
+ return -ENOMEM;
+
err = tegra_fuse_readl(TEGRA_FUSE_SKU_CALIB_0, &value);
if (err)
return dev_err_probe(dev, err,
@@ -1429,8 +1435,8 @@ tegra186_xusb_read_fuse_calibration(struct tegra186_xusb_padctl *padctl)
padctl->calib.hs_squelch = (value >> HS_SQUELCH_SHIFT) &
HS_SQUELCH_MASK;
- padctl->calib.hs_term_range_adj = (value >> HS_TERM_RANGE_ADJ_SHIFT) &
- HS_TERM_RANGE_ADJ_MASK;
+ hs_term_range_adj[0] = (value >> HS_TERM_RANGE_ADJ_PADX_SHIFT(0)) &
+ HS_TERM_RANGE_ADJ_PAD_MASK;
err = tegra_fuse_readl(TEGRA_FUSE_USB_CALIB_EXT_0, &value);
if (err) {
@@ -1442,6 +1448,17 @@ tegra186_xusb_read_fuse_calibration(struct tegra186_xusb_padctl *padctl)
padctl->calib.rpd_ctrl = (value >> RPD_CTRL_SHIFT) & RPD_CTRL_MASK;
+ for (i = 1; i < count; i++) {
+ if (soc->has_per_pad_term)
+ hs_term_range_adj[i] =
+ (value >> HS_TERM_RANGE_ADJ_PADX_SHIFT(i)) &
+ HS_TERM_RANGE_ADJ_PAD_MASK;
+ else
+ hs_term_range_adj[i] = hs_term_range_adj[0];
+ }
+
+ padctl->calib.hs_term_range_adj = hs_term_range_adj;
+
return 0;
}
@@ -1645,6 +1662,7 @@ const struct tegra_xusb_padctl_soc tegra194_xusb_padctl_soc = {
.supply_names = tegra194_xusb_padctl_supply_names,
.num_supplies = ARRAY_SIZE(tegra194_xusb_padctl_supply_names),
.supports_gen2 = true,
+ .has_per_pad_term = true,
};
EXPORT_SYMBOL_GPL(tegra194_xusb_padctl_soc);
#endif
diff --git a/drivers/phy/tegra/xusb.h b/drivers/phy/tegra/xusb.h
index 8cfbbdbd6e0c0..9f5651a3ea5d5 100644
--- a/drivers/phy/tegra/xusb.h
+++ b/drivers/phy/tegra/xusb.h
@@ -433,6 +433,7 @@ struct tegra_xusb_padctl_soc {
unsigned int num_supplies;
bool supports_gen2;
bool need_fake_usb3_port;
+ bool has_per_pad_term;
};
struct tegra_xusb_padctl {
--
2.53.0
^ permalink raw reply related [flat|nested] 3+ messages in thread
end of thread, other threads:[~2026-06-01 10:51 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-05-28 11:43 FAILED: patch "[PATCH] phy: tegra: xusb: Fix per-pad high-speed termination" failed to apply to 6.1-stable tree gregkh
2026-06-01 10:51 ` [PATCH 6.1.y 1/2] phy: tegra: xusb: Disable trk clk when not in use Sasha Levin
2026-06-01 10:51 ` [PATCH 6.1.y 2/2] phy: tegra: xusb: Fix per-pad high-speed termination calibration Sasha Levin
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.