All of lore.kernel.org
 help / color / mirror / Atom feed
* FAILED: patch "[PATCH] serial: qcom_geni: fix kfifo underflow when flush precedes" failed to apply to 6.6-stable tree
@ 2026-06-04 10:53 gregkh
  2026-06-06 12:49 ` [PATCH 6.6.y] serial: qcom_geni: fix kfifo underflow when flush precedes DMA completion IRQ Sasha Levin
  0 siblings, 1 reply; 2+ messages in thread
From: gregkh @ 2026-06-04 10:53 UTC (permalink / raw)
  To: viken.dadhaniya, bartosz.golaszewski, gregkh, stable; +Cc: stable


The patch below does not apply to the 6.6-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y
git checkout FETCH_HEAD
git cherry-pick -x 452d6fa37ae9b021f4f6d397dbae077f7296f6f4
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2026060404-computing-retiree-825a@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^..

Possible dependencies:



thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 452d6fa37ae9b021f4f6d397dbae077f7296f6f4 Mon Sep 17 00:00:00 2001
From: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com>
Date: Wed, 6 May 2026 10:15:21 +0530
Subject: [PATCH] serial: qcom_geni: fix kfifo underflow when flush precedes
 DMA completion IRQ

When uart_flush_buffer() runs before the DMA completion IRQ is delivered,
the following race can occur (all steps serialized by uart_port_lock):

  1. DMA starts: tx_remaining = N, kfifo contains N bytes
  2. DMA completes in hardware; IRQ is pending but not yet delivered
  3. uart_flush_buffer() acquires the port lock and calls kfifo_reset(),
     making kfifo_len() = 0 while tx_remaining remains N
  4. uart_flush_buffer() releases the port lock
  5. DMA IRQ fires; handle_tx_dma() acquires the port lock and calls
     uart_xmit_advance(uport, tx_remaining) on an empty kfifo

uart_xmit_advance() increments kfifo->out by tx_remaining. Since
kfifo_reset() already set both in and out to 0, out wraps past in,
causing kfifo_len() to return UART_XMIT_SIZE - tx_remaining. The next
start_tx_dma() call then submits a DMA transfer of stale buffer data.

Fix this by snapshotting kfifo_len() at the start of handle_tx_dma()
and skipping uart_xmit_advance() when fifo_len < tx_remaining, which
indicates the kfifo was reset by a preceding flush.

Fixes: 2aaa43c70778 ("tty: serial: qcom-geni-serial: add support for serial engine DMA")
Cc: stable <stable@kernel.org>
Signed-off-by: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260506-serial-dma-stale-tx-buf-v1-1-e3ccb360d719@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index 5139a9d21b2b..17da115b1e78 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -1031,8 +1031,20 @@ static void qcom_geni_serial_handle_tx_dma(struct uart_port *uport)
 {
 	struct qcom_geni_serial_port *port = to_dev_port(uport);
 	struct tty_port *tport = &uport->state->port;
+	unsigned int fifo_len = kfifo_len(&tport->xmit_fifo);
+
+	/*
+	 * Only advance the kfifo if it still contains the bytes that were
+	 * transferred. uart_flush_buffer() may have run before this IRQ
+	 * fired: it calls kfifo_reset() under the port lock, making
+	 * fifo_len = 0 while tx_remaining remains non-zero. Calling
+	 * uart_xmit_advance() in that case would underflow kfifo->out past
+	 * kfifo->in, making kfifo_len() wrap to UART_XMIT_SIZE - tx_remaining
+	 * and triggering a spurious large DMA transfer of stale data.
+	 */
+	if (fifo_len >= port->tx_remaining)
+		uart_xmit_advance(uport, port->tx_remaining);
 
-	uart_xmit_advance(uport, port->tx_remaining);
 	geni_se_tx_dma_unprep(&port->se, port->tx_dma_addr, port->tx_remaining);
 	port->tx_dma_addr = 0;
 	port->tx_remaining = 0;


^ permalink raw reply related	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2026-06-06 12:49 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-06-04 10:53 FAILED: patch "[PATCH] serial: qcom_geni: fix kfifo underflow when flush precedes" failed to apply to 6.6-stable tree gregkh
2026-06-06 12:49 ` [PATCH 6.6.y] serial: qcom_geni: fix kfifo underflow when flush precedes DMA completion IRQ Sasha Levin

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.