* FAILED: patch "[PATCH] iio: dac: ad5686: fix powerdown control on dual-channel" failed to apply to 5.15-stable tree
@ 2026-06-04 8:44 gregkh
2026-06-04 17:10 ` [PATCH 5.15.y] iio: dac: ad5686: fix powerdown control on dual-channel devices Sasha Levin
0 siblings, 1 reply; 2+ messages in thread
From: gregkh @ 2026-06-04 8:44 UTC (permalink / raw)
To: rodrigo.alencar, Stable, jic23; +Cc: stable
The patch below does not apply to the 5.15-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y
git checkout FETCH_HEAD
git cherry-pick -x 8aeaf25a85263a7a43357e16ad78ab969f6f8aeb
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2026060443-oxygen-unscathed-a75b@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 8aeaf25a85263a7a43357e16ad78ab969f6f8aeb Mon Sep 17 00:00:00 2001
From: Rodrigo Alencar <rodrigo.alencar@analog.com>
Date: Tue, 5 May 2026 13:35:05 +0100
Subject: [PATCH] iio: dac: ad5686: fix powerdown control on dual-channel
devices
Fix powerdown control by using a proper bit shift for the powerdown mask
values. During initialization, powerdown bits are initialized so that
unused bits are set to 1 and the correct bit shift is used. Dual-channel
devices use one-hot encoding in the address and that reflects on the
position of the powerdown bits, which are not channel-index based
for that case. Quad-channel devices also use one-hot encoding for the
channel address but the result of log2(address) coincides with the channel
index value. Mask as 0x3U is used rather than 0x3, because shift can reach
value of 30 (last channel of a 16-channel device), which would mess with
the sign bit. The issue was introduced when first adding support for
dual-channel devices, which overlooked powerdown control differences.
Fixes: 7dc8faeab3e3 ("iio: dac: ad5686: add support for AD5338R")
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
diff --git a/drivers/iio/dac/ad5686.c b/drivers/iio/dac/ad5686.c
index 2e443fcfeb39..a7213bc6b156 100644
--- a/drivers/iio/dac/ad5686.c
+++ b/drivers/iio/dac/ad5686.c
@@ -25,26 +25,37 @@ static const char * const ad5686_powerdown_modes[] = {
"three_state"
};
+static inline unsigned int ad5686_pd_mask_shift(const struct iio_chan_spec *chan)
+{
+ if (chan->channel == chan->address)
+ return chan->channel * 2;
+
+ /* one-hot encoding is used in dual/quad channel devices */
+ return __ffs(chan->address) * 2;
+}
+
static int ad5686_get_powerdown_mode(struct iio_dev *indio_dev,
const struct iio_chan_spec *chan)
{
+ unsigned int shift = ad5686_pd_mask_shift(chan);
struct ad5686_state *st = iio_priv(indio_dev);
guard(mutex)(&st->lock);
- return ((st->pwr_down_mode >> (chan->channel * 2)) & 0x3) - 1;
+ return ((st->pwr_down_mode >> shift) & 0x3U) - 1;
}
static int ad5686_set_powerdown_mode(struct iio_dev *indio_dev,
const struct iio_chan_spec *chan,
unsigned int mode)
{
+ unsigned int shift = ad5686_pd_mask_shift(chan);
struct ad5686_state *st = iio_priv(indio_dev);
guard(mutex)(&st->lock);
- st->pwr_down_mode &= ~(0x3 << (chan->channel * 2));
- st->pwr_down_mode |= ((mode + 1) << (chan->channel * 2));
+ st->pwr_down_mode &= ~(0x3U << shift);
+ st->pwr_down_mode |= (mode + 1) << shift;
return 0;
}
@@ -59,12 +70,12 @@ static const struct iio_enum ad5686_powerdown_mode_enum = {
static ssize_t ad5686_read_dac_powerdown(struct iio_dev *indio_dev,
uintptr_t private, const struct iio_chan_spec *chan, char *buf)
{
+ unsigned int shift = ad5686_pd_mask_shift(chan);
struct ad5686_state *st = iio_priv(indio_dev);
guard(mutex)(&st->lock);
- return sysfs_emit(buf, "%d\n", !!(st->pwr_down_mask &
- (0x3 << (chan->channel * 2))));
+ return sysfs_emit(buf, "%d\n", !!(st->pwr_down_mask & (0x3U << shift)));
}
static ssize_t ad5686_write_dac_powerdown(struct iio_dev *indio_dev,
@@ -86,9 +97,9 @@ static ssize_t ad5686_write_dac_powerdown(struct iio_dev *indio_dev,
guard(mutex)(&st->lock);
if (readin)
- st->pwr_down_mask |= (0x3 << (chan->channel * 2));
+ st->pwr_down_mask |= 0x3U << ad5686_pd_mask_shift(chan);
else
- st->pwr_down_mask &= ~(0x3 << (chan->channel * 2));
+ st->pwr_down_mask &= ~(0x3U << ad5686_pd_mask_shift(chan));
switch (st->chip_info->regmap_type) {
case AD5310_REGMAP:
@@ -468,7 +479,7 @@ int ad5686_probe(struct device *dev,
{
struct ad5686_state *st;
struct iio_dev *indio_dev;
- unsigned int val, ref_bit_msk;
+ unsigned int val, ref_bit_msk, shift;
bool has_external_vref;
u8 cmd;
int ret, i;
@@ -492,9 +503,18 @@ int ad5686_probe(struct device *dev,
has_external_vref = ret != -ENODEV;
st->vref_mv = has_external_vref ? ret / 1000 : st->chip_info->int_vref_mv;
+ /* Initialize masks to all ones provided the max shift (last channel) */
+ shift = ad5686_pd_mask_shift(&st->chip_info->channels[st->chip_info->num_channels - 1]);
+ st->pwr_down_mask = GENMASK(shift + 1, 0);
+ st->pwr_down_mode = GENMASK(shift + 1, 0);
+
/* Set all the power down mode for all channels to 1K pulldown */
- for (i = 0; i < st->chip_info->num_channels; i++)
- st->pwr_down_mode |= (0x01 << (i * 2));
+ for (i = 0; i < st->chip_info->num_channels; i++) {
+ shift = ad5686_pd_mask_shift(&st->chip_info->channels[i]);
+ st->pwr_down_mask &= ~(0x3U << shift); /* powered up state */
+ st->pwr_down_mode &= ~(0x3U << shift);
+ st->pwr_down_mode |= 0x01U << shift;
+ }
indio_dev->name = name;
indio_dev->info = &ad5686_info;
^ permalink raw reply related [flat|nested] 2+ messages in thread* [PATCH 5.15.y] iio: dac: ad5686: fix powerdown control on dual-channel devices
2026-06-04 8:44 FAILED: patch "[PATCH] iio: dac: ad5686: fix powerdown control on dual-channel" failed to apply to 5.15-stable tree gregkh
@ 2026-06-04 17:10 ` Sasha Levin
0 siblings, 0 replies; 2+ messages in thread
From: Sasha Levin @ 2026-06-04 17:10 UTC (permalink / raw)
To: stable; +Cc: Rodrigo Alencar, Stable, Jonathan Cameron, Sasha Levin
From: Rodrigo Alencar <rodrigo.alencar@analog.com>
[ Upstream commit 8aeaf25a85263a7a43357e16ad78ab969f6f8aeb ]
Fix powerdown control by using a proper bit shift for the powerdown mask
values. During initialization, powerdown bits are initialized so that
unused bits are set to 1 and the correct bit shift is used. Dual-channel
devices use one-hot encoding in the address and that reflects on the
position of the powerdown bits, which are not channel-index based
for that case. Quad-channel devices also use one-hot encoding for the
channel address but the result of log2(address) coincides with the channel
index value. Mask as 0x3U is used rather than 0x3, because shift can reach
value of 30 (last channel of a 16-channel device), which would mess with
the sign bit. The issue was introduced when first adding support for
dual-channel devices, which overlooked powerdown control differences.
Fixes: 7dc8faeab3e3 ("iio: dac: ad5686: add support for AD5338R")
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/iio/dac/ad5686.c | 46 +++++++++++++++++++++++++++++++---------
1 file changed, 36 insertions(+), 10 deletions(-)
diff --git a/drivers/iio/dac/ad5686.c b/drivers/iio/dac/ad5686.c
index be705f8148cc39..315d213be83a8e 100644
--- a/drivers/iio/dac/ad5686.c
+++ b/drivers/iio/dac/ad5686.c
@@ -25,22 +25,37 @@ static const char * const ad5686_powerdown_modes[] = {
"three_state"
};
+static inline unsigned int ad5686_pd_mask_shift(const struct iio_chan_spec *chan)
+{
+ if (chan->channel == chan->address)
+ return chan->channel * 2;
+
+ /* one-hot encoding is used in dual/quad channel devices */
+ return __ffs(chan->address) * 2;
+}
+
static int ad5686_get_powerdown_mode(struct iio_dev *indio_dev,
const struct iio_chan_spec *chan)
{
+ unsigned int shift = ad5686_pd_mask_shift(chan);
struct ad5686_state *st = iio_priv(indio_dev);
- return ((st->pwr_down_mode >> (chan->channel * 2)) & 0x3) - 1;
+ guard(mutex)(&st->lock);
+
+ return ((st->pwr_down_mode >> shift) & 0x3U) - 1;
}
static int ad5686_set_powerdown_mode(struct iio_dev *indio_dev,
const struct iio_chan_spec *chan,
unsigned int mode)
{
+ unsigned int shift = ad5686_pd_mask_shift(chan);
struct ad5686_state *st = iio_priv(indio_dev);
- st->pwr_down_mode &= ~(0x3 << (chan->channel * 2));
- st->pwr_down_mode |= ((mode + 1) << (chan->channel * 2));
+ guard(mutex)(&st->lock);
+
+ st->pwr_down_mode &= ~(0x3U << shift);
+ st->pwr_down_mode |= (mode + 1) << shift;
return 0;
}
@@ -55,10 +70,12 @@ static const struct iio_enum ad5686_powerdown_mode_enum = {
static ssize_t ad5686_read_dac_powerdown(struct iio_dev *indio_dev,
uintptr_t private, const struct iio_chan_spec *chan, char *buf)
{
+ unsigned int shift = ad5686_pd_mask_shift(chan);
struct ad5686_state *st = iio_priv(indio_dev);
- return sysfs_emit(buf, "%d\n", !!(st->pwr_down_mask &
- (0x3 << (chan->channel * 2))));
+ guard(mutex)(&st->lock);
+
+ return sysfs_emit(buf, "%d\n", !!(st->pwr_down_mask & (0x3U << shift)));
}
static ssize_t ad5686_write_dac_powerdown(struct iio_dev *indio_dev,
@@ -78,9 +95,9 @@ static ssize_t ad5686_write_dac_powerdown(struct iio_dev *indio_dev,
return ret;
if (readin)
- st->pwr_down_mask |= (0x3 << (chan->channel * 2));
+ st->pwr_down_mask |= 0x3U << ad5686_pd_mask_shift(chan);
else
- st->pwr_down_mask &= ~(0x3 << (chan->channel * 2));
+ st->pwr_down_mask &= ~(0x3U << ad5686_pd_mask_shift(chan));
switch (st->chip_info->regmap_type) {
case AD5310_REGMAP:
@@ -453,7 +470,7 @@ int ad5686_probe(struct device *dev,
{
struct ad5686_state *st;
struct iio_dev *indio_dev;
- unsigned int val, ref_bit_msk;
+ unsigned int val, ref_bit_msk, shift;
u8 cmd;
int ret, i, voltage_uv = 0;
@@ -488,9 +505,18 @@ int ad5686_probe(struct device *dev,
else
st->vref_mv = st->chip_info->int_vref_mv;
+ /* Initialize masks to all ones provided the max shift (last channel) */
+ shift = ad5686_pd_mask_shift(&st->chip_info->channels[st->chip_info->num_channels - 1]);
+ st->pwr_down_mask = GENMASK(shift + 1, 0);
+ st->pwr_down_mode = GENMASK(shift + 1, 0);
+
/* Set all the power down mode for all channels to 1K pulldown */
- for (i = 0; i < st->chip_info->num_channels; i++)
- st->pwr_down_mode |= (0x01 << (i * 2));
+ for (i = 0; i < st->chip_info->num_channels; i++) {
+ shift = ad5686_pd_mask_shift(&st->chip_info->channels[i]);
+ st->pwr_down_mask &= ~(0x3U << shift); /* powered up state */
+ st->pwr_down_mode &= ~(0x3U << shift);
+ st->pwr_down_mode |= 0x01U << shift;
+ }
indio_dev->name = name;
indio_dev->info = &ad5686_info;
--
2.53.0
^ permalink raw reply related [flat|nested] 2+ messages in thread
end of thread, other threads:[~2026-06-04 17:10 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-06-04 8:44 FAILED: patch "[PATCH] iio: dac: ad5686: fix powerdown control on dual-channel" failed to apply to 5.15-stable tree gregkh
2026-06-04 17:10 ` [PATCH 5.15.y] iio: dac: ad5686: fix powerdown control on dual-channel devices Sasha Levin
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.