* FAILED: patch "[PATCH] iio: adc: npcm: fix unbalanced clk_disable_unprepare()" failed to apply to 5.10-stable tree
@ 2026-06-04 8:43 gregkh
2026-06-04 17:11 ` [PATCH 5.10.y] iio: adc: npcm: fix unbalanced clk_disable_unprepare() Sasha Levin
0 siblings, 1 reply; 2+ messages in thread
From: gregkh @ 2026-06-04 8:43 UTC (permalink / raw)
To: devnexen, Stable, andriy.shevchenko, jic23; +Cc: stable
The patch below does not apply to the 5.10-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y
git checkout FETCH_HEAD
git cherry-pick -x 0d42e2c0bd6ceb89e44c6e065f9bdf9b1df3ef0c
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2026060420-falcon-onlooker-44bb@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 0d42e2c0bd6ceb89e44c6e065f9bdf9b1df3ef0c Mon Sep 17 00:00:00 2001
From: David Carlier <devnexen@gmail.com>
Date: Tue, 14 Apr 2026 13:30:06 +0100
Subject: [PATCH] iio: adc: npcm: fix unbalanced clk_disable_unprepare()
The driver acquired the ADC clock with devm_clk_get() and read its
rate, but never called clk_prepare_enable(). The probe error path and
npcm_adc_remove() both called clk_disable_unprepare() unconditionally,
causing the clk framework's enable/prepare counts to underflow on
probe failure or module unbind.
The issue went unnoticed because NPCM BMC firmware leaves the ADC
clock enabled at boot, so the driver happened to work in practice.
Switch to devm_clk_get_enabled() so the clock is properly enabled
during probe and automatically released by the device-managed
cleanup, and drop the now-redundant clk_disable_unprepare() from
both the probe error path and remove().
While at it, drop the duplicate error message on devm_request_irq()
failure since the IRQ core already logs it.
Fixes: 9bf85fbc9d8f ("iio: adc: add NPCM ADC driver")
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
diff --git a/drivers/iio/adc/npcm_adc.c b/drivers/iio/adc/npcm_adc.c
index ddabb9600d46..61c8b825bda1 100644
--- a/drivers/iio/adc/npcm_adc.c
+++ b/drivers/iio/adc/npcm_adc.c
@@ -231,7 +231,7 @@ static int npcm_adc_probe(struct platform_device *pdev)
if (IS_ERR(info->reset))
return PTR_ERR(info->reset);
- info->adc_clk = devm_clk_get(&pdev->dev, NULL);
+ info->adc_clk = devm_clk_get_enabled(&pdev->dev, NULL);
if (IS_ERR(info->adc_clk)) {
dev_warn(&pdev->dev, "ADC clock failed: can't read clk\n");
return PTR_ERR(info->adc_clk);
@@ -244,17 +244,13 @@ static int npcm_adc_probe(struct platform_device *pdev)
info->adc_sample_hz = clk_get_rate(info->adc_clk) / ((div + 1) * 2);
irq = platform_get_irq(pdev, 0);
- if (irq < 0) {
- ret = irq;
- goto err_disable_clk;
- }
+ if (irq < 0)
+ return irq;
ret = devm_request_irq(&pdev->dev, irq, npcm_adc_isr, 0,
"NPCM_ADC", indio_dev);
- if (ret < 0) {
- dev_err(dev, "failed requesting interrupt\n");
- goto err_disable_clk;
- }
+ if (ret < 0)
+ return ret;
reg_con = ioread32(info->regs + NPCM_ADCCON);
info->vref = devm_regulator_get_optional(&pdev->dev, "vref");
@@ -262,7 +258,7 @@ static int npcm_adc_probe(struct platform_device *pdev)
ret = regulator_enable(info->vref);
if (ret) {
dev_err(&pdev->dev, "Can't enable ADC reference voltage\n");
- goto err_disable_clk;
+ return ret;
}
iowrite32(reg_con & ~NPCM_ADCCON_REFSEL,
@@ -272,10 +268,8 @@ static int npcm_adc_probe(struct platform_device *pdev)
* Any error which is not ENODEV indicates the regulator
* has been specified and so is a failure case.
*/
- if (PTR_ERR(info->vref) != -ENODEV) {
- ret = PTR_ERR(info->vref);
- goto err_disable_clk;
- }
+ if (PTR_ERR(info->vref) != -ENODEV)
+ return PTR_ERR(info->vref);
/* Use internal reference */
iowrite32(reg_con | NPCM_ADCCON_REFSEL,
@@ -314,8 +308,6 @@ static int npcm_adc_probe(struct platform_device *pdev)
iowrite32(reg_con & ~NPCM_ADCCON_ADC_EN, info->regs + NPCM_ADCCON);
if (!IS_ERR(info->vref))
regulator_disable(info->vref);
-err_disable_clk:
- clk_disable_unprepare(info->adc_clk);
return ret;
}
@@ -332,7 +324,6 @@ static void npcm_adc_remove(struct platform_device *pdev)
iowrite32(regtemp & ~NPCM_ADCCON_ADC_EN, info->regs + NPCM_ADCCON);
if (!IS_ERR(info->vref))
regulator_disable(info->vref);
- clk_disable_unprepare(info->adc_clk);
}
static struct platform_driver npcm_adc_driver = {
^ permalink raw reply related [flat|nested] 2+ messages in thread* [PATCH 5.10.y] iio: adc: npcm: fix unbalanced clk_disable_unprepare()
2026-06-04 8:43 FAILED: patch "[PATCH] iio: adc: npcm: fix unbalanced clk_disable_unprepare()" failed to apply to 5.10-stable tree gregkh
@ 2026-06-04 17:11 ` Sasha Levin
0 siblings, 0 replies; 2+ messages in thread
From: Sasha Levin @ 2026-06-04 17:11 UTC (permalink / raw)
To: stable
Cc: David Carlier, Andy Shevchenko, Stable, Jonathan Cameron,
Sasha Levin
From: David Carlier <devnexen@gmail.com>
[ Upstream commit 0d42e2c0bd6ceb89e44c6e065f9bdf9b1df3ef0c ]
The driver acquired the ADC clock with devm_clk_get() and read its
rate, but never called clk_prepare_enable(). The probe error path and
npcm_adc_remove() both called clk_disable_unprepare() unconditionally,
causing the clk framework's enable/prepare counts to underflow on
probe failure or module unbind.
The issue went unnoticed because NPCM BMC firmware leaves the ADC
clock enabled at boot, so the driver happened to work in practice.
Switch to devm_clk_get_enabled() so the clock is properly enabled
during probe and automatically released by the device-managed
cleanup, and drop the now-redundant clk_disable_unprepare() from
both the probe error path and remove().
While at it, drop the duplicate error message on devm_request_irq()
failure since the IRQ core already logs it.
Fixes: 9bf85fbc9d8f ("iio: adc: add NPCM ADC driver")
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/iio/adc/npcm_adc.c | 26 ++++++++------------------
1 file changed, 8 insertions(+), 18 deletions(-)
diff --git a/drivers/iio/adc/npcm_adc.c b/drivers/iio/adc/npcm_adc.c
index d9d105920001e9..c06de95716c81c 100644
--- a/drivers/iio/adc/npcm_adc.c
+++ b/drivers/iio/adc/npcm_adc.c
@@ -180,7 +180,6 @@ static int npcm_adc_probe(struct platform_device *pdev)
u32 reg_con;
struct npcm_adc *info;
struct iio_dev *indio_dev;
- struct device *dev = &pdev->dev;
indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info));
if (!indio_dev)
@@ -197,7 +196,7 @@ static int npcm_adc_probe(struct platform_device *pdev)
if (IS_ERR(info->reset))
return PTR_ERR(info->reset);
- info->adc_clk = devm_clk_get(&pdev->dev, NULL);
+ info->adc_clk = devm_clk_get_enabled(&pdev->dev, NULL);
if (IS_ERR(info->adc_clk)) {
dev_warn(&pdev->dev, "ADC clock failed: can't read clk\n");
return PTR_ERR(info->adc_clk);
@@ -210,17 +209,13 @@ static int npcm_adc_probe(struct platform_device *pdev)
info->adc_sample_hz = clk_get_rate(info->adc_clk) / ((div + 1) * 2);
irq = platform_get_irq(pdev, 0);
- if (irq <= 0) {
- ret = -EINVAL;
- goto err_disable_clk;
- }
+ if (irq <= 0)
+ return -EINVAL;
ret = devm_request_irq(&pdev->dev, irq, npcm_adc_isr, 0,
"NPCM_ADC", indio_dev);
- if (ret < 0) {
- dev_err(dev, "failed requesting interrupt\n");
- goto err_disable_clk;
- }
+ if (ret < 0)
+ return ret;
reg_con = ioread32(info->regs + NPCM_ADCCON);
info->vref = devm_regulator_get_optional(&pdev->dev, "vref");
@@ -228,7 +223,7 @@ static int npcm_adc_probe(struct platform_device *pdev)
ret = regulator_enable(info->vref);
if (ret) {
dev_err(&pdev->dev, "Can't enable ADC reference voltage\n");
- goto err_disable_clk;
+ return ret;
}
iowrite32(reg_con & ~NPCM_ADCCON_REFSEL,
@@ -238,10 +233,8 @@ static int npcm_adc_probe(struct platform_device *pdev)
* Any error which is not ENODEV indicates the regulator
* has been specified and so is a failure case.
*/
- if (PTR_ERR(info->vref) != -ENODEV) {
- ret = PTR_ERR(info->vref);
- goto err_disable_clk;
- }
+ if (PTR_ERR(info->vref) != -ENODEV)
+ return PTR_ERR(info->vref);
/* Use internal reference */
iowrite32(reg_con | NPCM_ADCCON_REFSEL,
@@ -280,8 +273,6 @@ static int npcm_adc_probe(struct platform_device *pdev)
iowrite32(reg_con & ~NPCM_ADCCON_ADC_EN, info->regs + NPCM_ADCCON);
if (!IS_ERR(info->vref))
regulator_disable(info->vref);
-err_disable_clk:
- clk_disable_unprepare(info->adc_clk);
return ret;
}
@@ -298,7 +289,6 @@ static int npcm_adc_remove(struct platform_device *pdev)
iowrite32(regtemp & ~NPCM_ADCCON_ADC_EN, info->regs + NPCM_ADCCON);
if (!IS_ERR(info->vref))
regulator_disable(info->vref);
- clk_disable_unprepare(info->adc_clk);
return 0;
}
--
2.53.0
^ permalink raw reply related [flat|nested] 2+ messages in thread
end of thread, other threads:[~2026-06-04 17:12 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-06-04 8:43 FAILED: patch "[PATCH] iio: adc: npcm: fix unbalanced clk_disable_unprepare()" failed to apply to 5.10-stable tree gregkh
2026-06-04 17:11 ` [PATCH 5.10.y] iio: adc: npcm: fix unbalanced clk_disable_unprepare() Sasha Levin
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.