From: Chris Morgan <macroalpha82@gmail.com>
To: linux-iio@vger.kernel.org
Cc: andy@kernel.org, nuno.sa@analog.com, dlechner@baylibre.com,
jic23@kernel.org, jean-baptiste.maneyrol@tdk.com,
linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org,
heiko@sntech.de, conor+dt@kernel.org, krzk+dt@kernel.org,
robh@kernel.org, andriy.shevchenko@intel.com,
Chris Morgan <macromorgan@hotmail.com>
Subject: [PATCH V11 5/9] iio: imu: inv_icm42607: Add PM support for icm42607
Date: Wed, 10 Jun 2026 12:54:49 -0500 [thread overview]
Message-ID: <20260610175455.19006-6-macroalpha82@gmail.com> (raw)
In-Reply-To: <20260610175455.19006-1-macroalpha82@gmail.com>
From: Chris Morgan <macromorgan@hotmail.com>
Add power management support for the ICM42607 device driver.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
drivers/iio/imu/inv_icm42607/inv_icm42607.h | 18 +++
.../iio/imu/inv_icm42607/inv_icm42607_core.c | 125 ++++++++++++++++++
.../iio/imu/inv_icm42607/inv_icm42607_i2c.c | 1 +
.../iio/imu/inv_icm42607/inv_icm42607_spi.c | 1 +
4 files changed, 145 insertions(+)
diff --git a/drivers/iio/imu/inv_icm42607/inv_icm42607.h b/drivers/iio/imu/inv_icm42607/inv_icm42607.h
index 743a15fb1b89..1f1397eaa00e 100644
--- a/drivers/iio/imu/inv_icm42607/inv_icm42607.h
+++ b/drivers/iio/imu/inv_icm42607/inv_icm42607.h
@@ -9,6 +9,7 @@
#include <linux/bits.h>
#include <linux/iio/iio.h>
#include <linux/mutex.h>
+#include <linux/pm.h>
#include <linux/regmap.h>
#include <linux/types.h>
@@ -103,22 +104,32 @@ struct inv_icm42607_hw {
const struct inv_icm42607_conf *conf;
};
+struct inv_icm42607_suspended {
+ enum inv_icm42607_sensor_mode gyro;
+ enum inv_icm42607_sensor_mode accel;
+ bool temp;
+};
+
/**
* struct inv_icm42607_state - driver state variables
* @lock: lock for serializing multiple registers access.
* @hw: Hardware specific data.
* @map: regmap pointer.
* @vddio_supply: I/O voltage regulator for the chip.
+ * @vddio_en: I/O voltage status for runtime PM.
* @orientation: sensor chip orientation relative to main hardware.
* @conf: chip sensors configurations.
+ * @suspended: suspended sensors configuration.
*/
struct inv_icm42607_state {
struct mutex lock;
const struct inv_icm42607_hw *hw;
struct regmap *map;
struct regulator *vddio_supply;
+ bool vddio_en;
struct iio_mount_matrix orientation;
struct inv_icm42607_conf conf;
+ struct inv_icm42607_suspended suspended;
};
/* Virtual register addresses: @bank on MSB (4 upper bits), @address on LSB */
@@ -337,11 +348,18 @@ struct inv_icm42607_state {
#define INV_ICM42607_GYRO_STARTUP_TIME_MS 30
#define INV_ICM42607_TEMP_STARTUP_TIME_MS 77
+/*
+ * Suspend delay assumed from other icm42600 series device, not
+ * documented in datasheet.
+ */
+#define INV_ICM42607_SUSPEND_DELAY_MS 2000
+
typedef int (*inv_icm42607_bus_setup)(struct inv_icm42607_state *);
extern const struct regmap_config inv_icm42607_regmap_config;
extern const struct inv_icm42607_hw inv_icm42607_hw_data;
extern const struct inv_icm42607_hw inv_icm42607p_hw_data;
+extern const struct dev_pm_ops inv_icm42607_pm_ops;
int inv_icm42607_core_probe(struct regmap *regmap,
const struct inv_icm42607_hw *hw,
diff --git a/drivers/iio/imu/inv_icm42607/inv_icm42607_core.c b/drivers/iio/imu/inv_icm42607/inv_icm42607_core.c
index 26dc09bbeaed..5e1f924a3e34 100644
--- a/drivers/iio/imu/inv_icm42607/inv_icm42607_core.c
+++ b/drivers/iio/imu/inv_icm42607/inv_icm42607_core.c
@@ -8,6 +8,7 @@
#include <linux/iio/iio.h>
#include <linux/module.h>
#include <linux/mutex.h>
+#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
#include <linux/time.h>
@@ -71,6 +72,51 @@ const struct inv_icm42607_hw inv_icm42607p_hw_data = {
};
EXPORT_SYMBOL_NS_GPL(inv_icm42607p_hw_data, "IIO_ICM42607");
+static int inv_icm42607_set_pwr_mgmt0(struct inv_icm42607_state *st,
+ enum inv_icm42607_sensor_mode gyro,
+ enum inv_icm42607_sensor_mode accel,
+ bool temp, unsigned int *sleep_ms)
+{
+ enum inv_icm42607_sensor_mode oldgyro = st->conf.gyro.mode;
+ enum inv_icm42607_sensor_mode oldaccel = st->conf.accel.mode;
+ bool oldtemp = st->conf.temp_en;
+ unsigned int sleepval;
+ unsigned int val;
+ int ret;
+
+ if (gyro == oldgyro && accel == oldaccel && temp == oldtemp)
+ return 0;
+
+ val = FIELD_PREP(INV_ICM42607_PWR_MGMT0_GYRO_MODE_MASK, gyro);
+ val |= FIELD_PREP(INV_ICM42607_PWR_MGMT0_ACCEL_MODE_MASK, accel);
+ if (!temp)
+ val |= INV_ICM42607_PWR_MGMT0_ACCEL_LP_CLK_SEL;
+ ret = regmap_write(st->map, INV_ICM42607_REG_PWR_MGMT0, val);
+ if (ret)
+ return ret;
+
+ st->conf.gyro.mode = gyro;
+ st->conf.accel.mode = accel;
+ st->conf.temp_en = temp;
+
+ sleepval = 0;
+ if (temp && !oldtemp)
+ sleepval = max(sleepval, INV_ICM42607_TEMP_STARTUP_TIME_MS);
+
+ if (accel != oldaccel)
+ sleepval = max(sleepval, INV_ICM42607_ACCEL_STARTUP_TIME_MS);
+
+ if (gyro != oldgyro)
+ sleepval = max(sleepval, INV_ICM42607_GYRO_STARTUP_TIME_MS);
+
+ if (sleep_ms)
+ *sleep_ms = sleepval;
+ else if (sleepval)
+ fsleep(sleepval * USEC_PER_MSEC);
+
+ return 0;
+}
+
static int inv_icm42607_set_conf(struct inv_icm42607_state *st,
const struct inv_icm42607_conf *conf)
{
@@ -181,12 +227,17 @@ static int inv_icm42607_enable_vddio_reg(struct inv_icm42607_state *st)
{
int ret;
+ if (st->vddio_en)
+ return 0;
+
ret = regulator_enable(st->vddio_supply);
if (ret)
return ret;
fsleep(INV_ICM42607_POWER_UP_TIME_US);
+ st->vddio_en = true;
+
return 0;
}
@@ -194,7 +245,12 @@ static void inv_icm42607_disable_vddio_reg(void *_data)
{
struct inv_icm42607_state *st = _data;
+ if (!st->vddio_en)
+ return;
+
regulator_disable(st->vddio_supply);
+
+ st->vddio_en = false;
}
int inv_icm42607_core_probe(struct regmap *regmap,
@@ -209,6 +265,8 @@ int inv_icm42607_core_probe(struct regmap *regmap,
if (!st)
return -ENOMEM;
+ dev_set_drvdata(dev, st);
+
ret = devm_mutex_init(dev, &st->lock);
if (ret)
return ret;
@@ -244,10 +302,77 @@ int inv_icm42607_core_probe(struct regmap *regmap,
if (ret)
return ret;
+ ret = devm_pm_runtime_set_active_enabled(dev);
+ if (ret)
+ return ret;
+
+ pm_runtime_set_autosuspend_delay(dev, INV_ICM42607_SUSPEND_DELAY_MS);
+ pm_runtime_use_autosuspend(dev);
+
return 0;
}
EXPORT_SYMBOL_NS_GPL(inv_icm42607_core_probe, "IIO_ICM42607");
+static int inv_icm42607_suspend(struct device *dev)
+{
+ struct inv_icm42607_state *st = dev_get_drvdata(dev);
+ int ret;
+
+ ret = pm_runtime_force_suspend(dev);
+ if (ret)
+ return ret;
+
+ inv_icm42607_disable_vddio_reg(st);
+
+ return 0;
+}
+
+static int inv_icm42607_resume(struct device *dev)
+{
+ struct inv_icm42607_state *st = dev_get_drvdata(dev);
+ int ret;
+
+ ret = inv_icm42607_enable_vddio_reg(st);
+ if (ret)
+ return ret;
+
+ return pm_runtime_force_resume(dev);
+}
+
+static int inv_icm42607_runtime_suspend(struct device *dev)
+{
+ struct inv_icm42607_state *st = dev_get_drvdata(dev);
+
+ guard(mutex)(&st->lock);
+
+ /* save sensors state */
+ st->suspended.gyro = st->conf.gyro.mode;
+ st->suspended.accel = st->conf.accel.mode;
+ st->suspended.temp = st->conf.temp_en;
+
+ return inv_icm42607_set_pwr_mgmt0(st, INV_ICM42607_SENSOR_MODE_OFF,
+ INV_ICM42607_SENSOR_MODE_OFF, false,
+ NULL);
+}
+
+static int inv_icm42607_runtime_resume(struct device *dev)
+{
+ struct inv_icm42607_state *st = dev_get_drvdata(dev);
+
+ guard(mutex)(&st->lock);
+
+ /* restore sensors state */
+ return inv_icm42607_set_pwr_mgmt0(st, st->suspended.gyro,
+ st->suspended.accel,
+ st->suspended.temp, NULL);
+}
+
+EXPORT_NS_GPL_DEV_PM_OPS(inv_icm42607_pm_ops, IIO_ICM42607) = {
+ SYSTEM_SLEEP_PM_OPS(inv_icm42607_suspend, inv_icm42607_resume)
+ RUNTIME_PM_OPS(inv_icm42607_runtime_suspend,
+ inv_icm42607_runtime_resume, NULL)
+};
+
MODULE_AUTHOR("InvenSense, Inc.");
MODULE_DESCRIPTION("InvenSense ICM-42607x device driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/iio/imu/inv_icm42607/inv_icm42607_i2c.c b/drivers/iio/imu/inv_icm42607/inv_icm42607_i2c.c
index 2946d5465853..0c2ff8e12643 100644
--- a/drivers/iio/imu/inv_icm42607/inv_icm42607_i2c.c
+++ b/drivers/iio/imu/inv_icm42607/inv_icm42607_i2c.c
@@ -80,6 +80,7 @@ static struct i2c_driver inv_icm42607_driver = {
.driver = {
.name = "inv-icm42607-i2c",
.of_match_table = inv_icm42607_of_matches,
+ .pm = pm_ptr(&inv_icm42607_pm_ops),
},
.id_table = inv_icm42607_id,
.probe = inv_icm42607_probe,
diff --git a/drivers/iio/imu/inv_icm42607/inv_icm42607_spi.c b/drivers/iio/imu/inv_icm42607/inv_icm42607_spi.c
index 3485777ac5b6..1a7f6b0fa86b 100644
--- a/drivers/iio/imu/inv_icm42607/inv_icm42607_spi.c
+++ b/drivers/iio/imu/inv_icm42607/inv_icm42607_spi.c
@@ -92,6 +92,7 @@ static struct spi_driver inv_icm42607_driver = {
.driver = {
.name = "inv-icm42607-spi",
.of_match_table = inv_icm42607_of_matches,
+ .pm = pm_ptr(&inv_icm42607_pm_ops),
},
.id_table = inv_icm42607_spi_id_table,
.probe = inv_icm42607_probe,
--
2.43.0
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
WARNING: multiple messages have this Message-ID (diff)
From: Chris Morgan <macroalpha82@gmail.com>
To: linux-iio@vger.kernel.org
Cc: andy@kernel.org, nuno.sa@analog.com, dlechner@baylibre.com,
jic23@kernel.org, jean-baptiste.maneyrol@tdk.com,
linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org,
heiko@sntech.de, conor+dt@kernel.org, krzk+dt@kernel.org,
robh@kernel.org, andriy.shevchenko@intel.com,
Chris Morgan <macromorgan@hotmail.com>
Subject: [PATCH V11 5/9] iio: imu: inv_icm42607: Add PM support for icm42607
Date: Wed, 10 Jun 2026 12:54:49 -0500 [thread overview]
Message-ID: <20260610175455.19006-6-macroalpha82@gmail.com> (raw)
In-Reply-To: <20260610175455.19006-1-macroalpha82@gmail.com>
From: Chris Morgan <macromorgan@hotmail.com>
Add power management support for the ICM42607 device driver.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
drivers/iio/imu/inv_icm42607/inv_icm42607.h | 18 +++
.../iio/imu/inv_icm42607/inv_icm42607_core.c | 125 ++++++++++++++++++
.../iio/imu/inv_icm42607/inv_icm42607_i2c.c | 1 +
.../iio/imu/inv_icm42607/inv_icm42607_spi.c | 1 +
4 files changed, 145 insertions(+)
diff --git a/drivers/iio/imu/inv_icm42607/inv_icm42607.h b/drivers/iio/imu/inv_icm42607/inv_icm42607.h
index 743a15fb1b89..1f1397eaa00e 100644
--- a/drivers/iio/imu/inv_icm42607/inv_icm42607.h
+++ b/drivers/iio/imu/inv_icm42607/inv_icm42607.h
@@ -9,6 +9,7 @@
#include <linux/bits.h>
#include <linux/iio/iio.h>
#include <linux/mutex.h>
+#include <linux/pm.h>
#include <linux/regmap.h>
#include <linux/types.h>
@@ -103,22 +104,32 @@ struct inv_icm42607_hw {
const struct inv_icm42607_conf *conf;
};
+struct inv_icm42607_suspended {
+ enum inv_icm42607_sensor_mode gyro;
+ enum inv_icm42607_sensor_mode accel;
+ bool temp;
+};
+
/**
* struct inv_icm42607_state - driver state variables
* @lock: lock for serializing multiple registers access.
* @hw: Hardware specific data.
* @map: regmap pointer.
* @vddio_supply: I/O voltage regulator for the chip.
+ * @vddio_en: I/O voltage status for runtime PM.
* @orientation: sensor chip orientation relative to main hardware.
* @conf: chip sensors configurations.
+ * @suspended: suspended sensors configuration.
*/
struct inv_icm42607_state {
struct mutex lock;
const struct inv_icm42607_hw *hw;
struct regmap *map;
struct regulator *vddio_supply;
+ bool vddio_en;
struct iio_mount_matrix orientation;
struct inv_icm42607_conf conf;
+ struct inv_icm42607_suspended suspended;
};
/* Virtual register addresses: @bank on MSB (4 upper bits), @address on LSB */
@@ -337,11 +348,18 @@ struct inv_icm42607_state {
#define INV_ICM42607_GYRO_STARTUP_TIME_MS 30
#define INV_ICM42607_TEMP_STARTUP_TIME_MS 77
+/*
+ * Suspend delay assumed from other icm42600 series device, not
+ * documented in datasheet.
+ */
+#define INV_ICM42607_SUSPEND_DELAY_MS 2000
+
typedef int (*inv_icm42607_bus_setup)(struct inv_icm42607_state *);
extern const struct regmap_config inv_icm42607_regmap_config;
extern const struct inv_icm42607_hw inv_icm42607_hw_data;
extern const struct inv_icm42607_hw inv_icm42607p_hw_data;
+extern const struct dev_pm_ops inv_icm42607_pm_ops;
int inv_icm42607_core_probe(struct regmap *regmap,
const struct inv_icm42607_hw *hw,
diff --git a/drivers/iio/imu/inv_icm42607/inv_icm42607_core.c b/drivers/iio/imu/inv_icm42607/inv_icm42607_core.c
index 26dc09bbeaed..5e1f924a3e34 100644
--- a/drivers/iio/imu/inv_icm42607/inv_icm42607_core.c
+++ b/drivers/iio/imu/inv_icm42607/inv_icm42607_core.c
@@ -8,6 +8,7 @@
#include <linux/iio/iio.h>
#include <linux/module.h>
#include <linux/mutex.h>
+#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
#include <linux/time.h>
@@ -71,6 +72,51 @@ const struct inv_icm42607_hw inv_icm42607p_hw_data = {
};
EXPORT_SYMBOL_NS_GPL(inv_icm42607p_hw_data, "IIO_ICM42607");
+static int inv_icm42607_set_pwr_mgmt0(struct inv_icm42607_state *st,
+ enum inv_icm42607_sensor_mode gyro,
+ enum inv_icm42607_sensor_mode accel,
+ bool temp, unsigned int *sleep_ms)
+{
+ enum inv_icm42607_sensor_mode oldgyro = st->conf.gyro.mode;
+ enum inv_icm42607_sensor_mode oldaccel = st->conf.accel.mode;
+ bool oldtemp = st->conf.temp_en;
+ unsigned int sleepval;
+ unsigned int val;
+ int ret;
+
+ if (gyro == oldgyro && accel == oldaccel && temp == oldtemp)
+ return 0;
+
+ val = FIELD_PREP(INV_ICM42607_PWR_MGMT0_GYRO_MODE_MASK, gyro);
+ val |= FIELD_PREP(INV_ICM42607_PWR_MGMT0_ACCEL_MODE_MASK, accel);
+ if (!temp)
+ val |= INV_ICM42607_PWR_MGMT0_ACCEL_LP_CLK_SEL;
+ ret = regmap_write(st->map, INV_ICM42607_REG_PWR_MGMT0, val);
+ if (ret)
+ return ret;
+
+ st->conf.gyro.mode = gyro;
+ st->conf.accel.mode = accel;
+ st->conf.temp_en = temp;
+
+ sleepval = 0;
+ if (temp && !oldtemp)
+ sleepval = max(sleepval, INV_ICM42607_TEMP_STARTUP_TIME_MS);
+
+ if (accel != oldaccel)
+ sleepval = max(sleepval, INV_ICM42607_ACCEL_STARTUP_TIME_MS);
+
+ if (gyro != oldgyro)
+ sleepval = max(sleepval, INV_ICM42607_GYRO_STARTUP_TIME_MS);
+
+ if (sleep_ms)
+ *sleep_ms = sleepval;
+ else if (sleepval)
+ fsleep(sleepval * USEC_PER_MSEC);
+
+ return 0;
+}
+
static int inv_icm42607_set_conf(struct inv_icm42607_state *st,
const struct inv_icm42607_conf *conf)
{
@@ -181,12 +227,17 @@ static int inv_icm42607_enable_vddio_reg(struct inv_icm42607_state *st)
{
int ret;
+ if (st->vddio_en)
+ return 0;
+
ret = regulator_enable(st->vddio_supply);
if (ret)
return ret;
fsleep(INV_ICM42607_POWER_UP_TIME_US);
+ st->vddio_en = true;
+
return 0;
}
@@ -194,7 +245,12 @@ static void inv_icm42607_disable_vddio_reg(void *_data)
{
struct inv_icm42607_state *st = _data;
+ if (!st->vddio_en)
+ return;
+
regulator_disable(st->vddio_supply);
+
+ st->vddio_en = false;
}
int inv_icm42607_core_probe(struct regmap *regmap,
@@ -209,6 +265,8 @@ int inv_icm42607_core_probe(struct regmap *regmap,
if (!st)
return -ENOMEM;
+ dev_set_drvdata(dev, st);
+
ret = devm_mutex_init(dev, &st->lock);
if (ret)
return ret;
@@ -244,10 +302,77 @@ int inv_icm42607_core_probe(struct regmap *regmap,
if (ret)
return ret;
+ ret = devm_pm_runtime_set_active_enabled(dev);
+ if (ret)
+ return ret;
+
+ pm_runtime_set_autosuspend_delay(dev, INV_ICM42607_SUSPEND_DELAY_MS);
+ pm_runtime_use_autosuspend(dev);
+
return 0;
}
EXPORT_SYMBOL_NS_GPL(inv_icm42607_core_probe, "IIO_ICM42607");
+static int inv_icm42607_suspend(struct device *dev)
+{
+ struct inv_icm42607_state *st = dev_get_drvdata(dev);
+ int ret;
+
+ ret = pm_runtime_force_suspend(dev);
+ if (ret)
+ return ret;
+
+ inv_icm42607_disable_vddio_reg(st);
+
+ return 0;
+}
+
+static int inv_icm42607_resume(struct device *dev)
+{
+ struct inv_icm42607_state *st = dev_get_drvdata(dev);
+ int ret;
+
+ ret = inv_icm42607_enable_vddio_reg(st);
+ if (ret)
+ return ret;
+
+ return pm_runtime_force_resume(dev);
+}
+
+static int inv_icm42607_runtime_suspend(struct device *dev)
+{
+ struct inv_icm42607_state *st = dev_get_drvdata(dev);
+
+ guard(mutex)(&st->lock);
+
+ /* save sensors state */
+ st->suspended.gyro = st->conf.gyro.mode;
+ st->suspended.accel = st->conf.accel.mode;
+ st->suspended.temp = st->conf.temp_en;
+
+ return inv_icm42607_set_pwr_mgmt0(st, INV_ICM42607_SENSOR_MODE_OFF,
+ INV_ICM42607_SENSOR_MODE_OFF, false,
+ NULL);
+}
+
+static int inv_icm42607_runtime_resume(struct device *dev)
+{
+ struct inv_icm42607_state *st = dev_get_drvdata(dev);
+
+ guard(mutex)(&st->lock);
+
+ /* restore sensors state */
+ return inv_icm42607_set_pwr_mgmt0(st, st->suspended.gyro,
+ st->suspended.accel,
+ st->suspended.temp, NULL);
+}
+
+EXPORT_NS_GPL_DEV_PM_OPS(inv_icm42607_pm_ops, IIO_ICM42607) = {
+ SYSTEM_SLEEP_PM_OPS(inv_icm42607_suspend, inv_icm42607_resume)
+ RUNTIME_PM_OPS(inv_icm42607_runtime_suspend,
+ inv_icm42607_runtime_resume, NULL)
+};
+
MODULE_AUTHOR("InvenSense, Inc.");
MODULE_DESCRIPTION("InvenSense ICM-42607x device driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/iio/imu/inv_icm42607/inv_icm42607_i2c.c b/drivers/iio/imu/inv_icm42607/inv_icm42607_i2c.c
index 2946d5465853..0c2ff8e12643 100644
--- a/drivers/iio/imu/inv_icm42607/inv_icm42607_i2c.c
+++ b/drivers/iio/imu/inv_icm42607/inv_icm42607_i2c.c
@@ -80,6 +80,7 @@ static struct i2c_driver inv_icm42607_driver = {
.driver = {
.name = "inv-icm42607-i2c",
.of_match_table = inv_icm42607_of_matches,
+ .pm = pm_ptr(&inv_icm42607_pm_ops),
},
.id_table = inv_icm42607_id,
.probe = inv_icm42607_probe,
diff --git a/drivers/iio/imu/inv_icm42607/inv_icm42607_spi.c b/drivers/iio/imu/inv_icm42607/inv_icm42607_spi.c
index 3485777ac5b6..1a7f6b0fa86b 100644
--- a/drivers/iio/imu/inv_icm42607/inv_icm42607_spi.c
+++ b/drivers/iio/imu/inv_icm42607/inv_icm42607_spi.c
@@ -92,6 +92,7 @@ static struct spi_driver inv_icm42607_driver = {
.driver = {
.name = "inv-icm42607-spi",
.of_match_table = inv_icm42607_of_matches,
+ .pm = pm_ptr(&inv_icm42607_pm_ops),
},
.id_table = inv_icm42607_spi_id_table,
.probe = inv_icm42607_probe,
--
2.43.0
next prev parent reply other threads:[~2026-06-10 17:57 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-10 17:54 [PATCH V11 0/9] Add Invensense ICM42607 Chris Morgan
2026-06-10 17:54 ` Chris Morgan
2026-06-10 17:54 ` [PATCH V11 1/9] dt-bindings: iio: imu: icm42600: Add mount-matrix to icm42600 Chris Morgan
2026-06-10 17:54 ` Chris Morgan
2026-06-10 17:54 ` [PATCH V11 2/9] dt-bindings: iio: imu: icm42600: Add icm42607 Chris Morgan
2026-06-10 17:54 ` Chris Morgan
2026-06-10 17:54 ` [PATCH V11 3/9] iio: imu: inv_icm42607: Add inv_icm42607 Core Driver Chris Morgan
2026-06-10 17:54 ` Chris Morgan
2026-06-10 18:11 ` sashiko-bot
2026-06-10 17:54 ` [PATCH V11 4/9] iio: imu: inv_icm42607: Add I2C and SPI For icm42607 Chris Morgan
2026-06-10 17:54 ` Chris Morgan
2026-06-10 18:25 ` sashiko-bot
2026-06-10 17:54 ` Chris Morgan [this message]
2026-06-10 17:54 ` [PATCH V11 5/9] iio: imu: inv_icm42607: Add PM support for icm42607 Chris Morgan
2026-06-10 17:54 ` [PATCH V11 6/9] iio: imu: inv_icm42607: Add Temp Support in icm42607 Chris Morgan
2026-06-10 17:54 ` Chris Morgan
2026-06-10 18:15 ` sashiko-bot
2026-06-10 17:54 ` [PATCH V11 7/9] iio: imu: inv_icm42607: Add Accelerometer for icm42607 Chris Morgan
2026-06-10 17:54 ` Chris Morgan
2026-06-10 18:10 ` sashiko-bot
2026-06-10 17:54 ` [PATCH V11 8/9] iio: imu: inv_icm42607: Add Gyroscope to icm42607 Chris Morgan
2026-06-10 17:54 ` Chris Morgan
2026-06-10 18:14 ` sashiko-bot
2026-06-10 17:54 ` [PATCH V11 9/9] arm64: dts: rockchip: Add icm42607p IMU for RG-DS Chris Morgan
2026-06-10 17:54 ` Chris Morgan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260610175455.19006-6-macroalpha82@gmail.com \
--to=macroalpha82@gmail.com \
--cc=andriy.shevchenko@intel.com \
--cc=andy@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dlechner@baylibre.com \
--cc=heiko@sntech.de \
--cc=jean-baptiste.maneyrol@tdk.com \
--cc=jic23@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=macromorgan@hotmail.com \
--cc=nuno.sa@analog.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.